New algorithm read the first aligned address and mask off the
unwanted bytes (this strategy is similar to arch-specific
implementations used on powerpc, sparc, and sh).
The loop now read word-aligned address and check using the has_eq
macro.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc-linux-gnu,
and powerpc64-linux-gnu by removing the arch-specific assembly
implementation and disabling multi-arch (it covers both LE and BE
for 64 and 32 bits).
Co-authored-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Now that stpcpy is vectorized based on op_t, it should be better to
call it instead of strlen plus memcpy.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64-linux-gnu,
and powerpc-linux-gnu by removing the arch-specific assembly
implementation and disabling multi-arch (it covers both LE and BE
for 64 and 32 bits).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
It follows the strategy:
- Align the destination on word boundary using byte operations.
- If source is also word aligned, read a word per time, check for
null (using has_zero from string-fzb.h), and write the remaining
bytes.
- If source is not word aligned, loop by aligning the source, and
merging the result of two reads. Similar to aligned case,
check for null with has_zero, and write the remaining bytes if
null is found.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64-linux-gnu,
and powerpc-linux-gnu by removing the arch-specific assembly
implementation and disabling multi-arch (it covers both LE and BE
for 64 and 32 bits).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
It follows the strategy:
- Align the first input to word boundary using byte operations.
- If second input is also word aligned, read a word per time, check
for null (using has_zero), and check final words using byte
operation.
- If second input is not word aligned, loop by aligning the source,
and merge the result of two reads. Similar to aligned case, check
for null with has_zero, and check final words using byte operation.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64-linux-gnu,
and powerpc-linux-gnu by removing the arch-specific assembly
implementation and disabling multi-arch (it covers both LE and BE
for 64 and 32 bits).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
It follows the strategy:
- Align the first input to word boundary using byte operations.
- If second input is also word aligned, read a word per time, check for
null (using has_zero), and check final words using byte operation.
- If second input is not word aligned, loop by aligning the source, and
merging the result of two reads. Similar to aligned case, check for
null with has_zero, and check final words using byte operation.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64-linux-gnu,
and powerpc-linux-gnu by removing the arch-specific assembly
implementation and disabling multi-arch (it covers both LE and BE
for 64 and 32 bits).
Co-authored-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
New algorithm now calls strchrnul.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc-linux-gnu,
and powerpc64-linux-gnu by removing the arch-specific assembly
implementation and disabling multi-arch (it covers both LE and BE
for 64 and 32 bits).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
New algorithm read the first aligned address and mask off the unwanted
bytes (this strategy is similar to arch-specific implementations used
on powerpc, sparc, and sh).
The loop now read word-aligned address and check using the has_zero_eq
function.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64-linux-gnu,
and powerpc-linux-gnu by removing the arch-specific assembly
implementation and disabling multi-arch (it covers both LE and BE
for 64 and 32 bits).
Co-authored-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
New algorithm read the first aligned address and mask off the
unwanted bytes (this strategy is similar to arch-specific
implementations used on powerpc, sparc, and sh).
The loop now read word-aligned address and check using the has_zero
macro.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc-linux-gnu,
and powercp64-linux-gnu by removing the arch-specific assembly
implementation and disabling multi-arch (it covers both LE and BE
for 64 and 32 bits).
Co-authored-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
It moves OP_T_THRES out of memcopy.h to its own header and adjust
each architecture that redefines it.
Checked with a build and check with run-built-tests=no for all major
Linux ABIs.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
It moves the op_t definition out to an specific header, adds
the attribute 'may-alias', and cleanup its duplicated definitions.
Checked with a build and check with run-built-tests=no for all major
Linux ABIs.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Almost all uses of rawmemchr find the end of a string. Since most targets use
a generic implementation, replacing it with strchr is better since that is
optimized by compilers into strlen (s) + s. Also fix the generic rawmemchr
implementation to use a cast to unsigned char in the if statement.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Occurs when `src` has no null-term.
Two cases:
1) Zero-length check is doing:
```
test %rdx, %rdx
jl L(zero_len)
```
which doesn't actually check zero (was at some point `decq` and the
flag never got updated).
The fix is just make the flag `jle` i.e:
```
test %rdx, %rdx
jle L(zero_len)
```
2) Length check in page-cross case checking if we should continue is
doing:
```
cmpq %r8, %rdx
jb L(page_cross_small)
```
which means we will continue searching for null-term if length ends at
the end of a page and there was no null-term in `src`.
The fix is to make the flag:
```
cmpq %r8, %rdx
jbe L(page_cross_small)
```
When compiling with GCC 6+ the sparc build warns that some variables
might be used uninitialized. However it does not seem the fact, since
the variables are really initialized (and also other targets that use the
same code, like powerpc, do not warn about it).
So suppress the warning for now.
Changes from v1:
* Update patch description and the explanation for the suppresion.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
clang emits an warning when a double alias redirection is used, to warn
the the original symbol will be used even when weak definition is
overridden. However, this is a common pattern for weak_alias, where
multiple alias are set to same symbol.
Reviewed-by: Fangrui Song <maskray@google.com>
Previous implementation was adjusting length (rsi) to match
bytes (eax), but since there is no bound to length this can cause
overflow.
Fix is to just convert the byte-count (eax) to length by dividing by
sizeof (wchar_t) before the comparison.
Full check passes on x86-64 and build succeeds w/ and w/o multiarch.
The Z modifier is a nonstandard synonymn for z (that predates z
itself) and compiler might issue an warning for in invalid
conversion specifier.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
commit 6dcbb7d95d
Author: Noah Goldstein <goldstein.w.n@gmail.com>
Date: Mon Jun 6 21:11:33 2022 -0700
x86: Shrink code size of memchr-avx2.S
Changed how the page cross case aligned string (rdi) in
rawmemchr. This was incompatible with how
`L(cross_page_continue)` expected the pointer to be aligned and
would cause rawmemchr to read data start started before the
beginning of the string. What it would read was in valid memory
but could count CHAR matches resulting in an incorrect return
value.
This commit fixes that issue by essentially reverting the changes to
the L(page_cross) case as they didn't really matter.
Test cases added and all pass with the new code (and where confirmed
to fail with the old code).
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
commit e938c0274 "Don't add access size hints to fortifiable functions"
converted a few '__attr_access ((...))' into '__fortified_attr_access (...)'
calls.
But one of conversions had double parentheses of '__fortified_attr_access (...)'.
Noticed as a gnat6 build failure:
/<<NIX>>-glibc-2.34-210-dev/include/bits/string_fortified.h:110:50: error: macro "__fortified_attr_access" requires 3 arguments, but only 1 given
The change fixes parentheses.
This is seen when using compilers that do not support
__builtin___stpncpy_chk, e.g. gcc older than 4.7, clang older than 2.6
or some compiler not derived from gcc or clang.
Signed-off-by: Sergei Trofimovich <slyich@gmail.com>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
On 32-bit machines this has no affect. On 64-bit machines
{u}int_fast{16|32} are set as {u}int64_t which is often not
ideal. Particularly x86_64 this change both saves code size and
may save instruction cost.
Full xcheck passes on x86_64.
Copyright The GNU Toolchain Authors.
The comments on strlen() don't match what the actual code does. They
describe an older algorithm which is no longer in use. This change
replace the old comments with new ones describing the algorithm used.
I am a first time contributor, and I believe there is no need for
copyright assignment, since the file changed is not in the shared
source files list.
This patch only changes comments, but for safety I have run the tests in
my x64 ubuntu machine, with the following results:
Summary of test results:
5051 PASS
80 UNSUPPORTED
16 XFAIL
6 XPASS
Signed-off-by: Ricardo Bittencourt <bluepenguin@gmail.com>
In most cases the simple/stupid/builtin functions were in there to
benchmark optimized implementations against. Only in some cases the
functions are used to check expected results.
Remove these tests from IMPL() and only keep them in wherever they're
used for a specific purpose, e.g. to generate expected results.
This improves timing of `make subdirs=string` by over a minute and a
half (over 15%) on a Whiskey Lake laptop.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Noah Goldstein <libc-alpha@sourceware.org>
Looks like an oversight in memcpy tests resulted in s2 and s1 not being
swapped for the second iteration of the memcpy test. Fix it. Also fix
a formatting nit.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Recent changes in test-strncasecmp and test-strncmp pushed the run time
of the tests above the 4 minute limit specified in test-string.h on an
arm tester machine.
The symbol is not present current POSIX specification and compiler
already generates memset call. The arch specific implementation
is just to avoid the __bzero symbol creation (which ia64 abi does
not export).
Verify that wcsncmp (L("abc"), L("abd"), SIZE_MAX) == 0. The new test
fails without
commit ddf0992cf5
Author: Noah Goldstein <goldstein.w.n@gmail.com>
Date: Sun Jan 9 16:02:21 2022 -0600
x86: Fix __wcsncmp_avx2 in strcmp-avx2.S [BZ# 28755]
and
commit 7e08db3359
Author: Noah Goldstein <goldstein.w.n@gmail.com>
Date: Sun Jan 9 16:02:28 2022 -0600
x86: Fix __wcsncmp_evex in strcmp-evex.S [BZ# 28755]
This is for BZ #28755.
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
Logic can read before the start of `s1` / `s2` if both `s1` and `s2`
are near the start of a page. To avoid having the result contimated by
these comparisons the `strcmp` variants would mask off these
comparisons. This was missing in the `strncmp` variants causing
the bug. This commit adds the masking to `strncmp` so that out of
range comparisons don't affect the result.
test-strcmp, test-strncmp, test-wcscmp, and test-wcsncmp all pass as
well a full xcheck on x86_64 linux.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The prior sentinel logic was broken and was checking the SIMPLE_MEMSET
as opposed to the tested implementation. As well `s` (the test buffer)
was not reset between implementation tests so it was possible for a
buggy implementation to be hidden by a previously executed correct
one.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Add additional test cases for small / medium sizes.
Add tests in test-strncmp.c where `n` is near ULONG_MAX or LONG_MIN to
test for overflow bugs in length handling.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
These implementations just add to test duration. Since we have
simple_* implementations we already have a safe reference
implementation.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Some functions (e.g. stpcpy, pread64, etc.) had moved to POSIX in the
main headers as they got incorporated into the standard, but their
fortified variants remained under __USE_GNU. As a result, these
functions did not get fortified when _GNU_SOURCE was not defined.
Add test wrappers that check all functions tested in tst-chk0 at all
levels with _GNU_SOURCE undefined and then use the failures to (1)
exclude checks for _GNU_SOURCE functions in these tests and (2) Fix
feature macro guards in the fortified function headers so that they're
the same as the ones in the main headers.
This fixes BZ #28746.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
commit d585ba47fc
Author: Noah Goldstein <goldstein.w.n@gmail.com>
Date: Mon Nov 1 00:49:48 2021 -0500
string: Make tests birdirectional test-memcpy.c
Add tests that had src/dst non 4-byte aligned. Since src/dst are
initialized/compared as uint32_t type which is 4-byte aligned this can
break on some targets.
Fix the issue by specifying a new non-aligned 4-byte
`unaligned_uint32_t` for src/dst.
Another alternative is to rely on memcpy/memcmp for
initializing/testing src/dst. Using memcpy for initializing in memcpy
tests, however, could lead to future bugs.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Must use notl %edi here as lower bits are for CHAR comparisons
potentially out of range thus can be 0 without indicating mismatch.
This fixes BZ #28646.
Co-Authored-By: H.J. Lu <hjl.tools@gmail.com>
No bug.
This commit splits test-memcpy.c into test-memcpy.c and
test-memcpy-large.c. The idea is parallel builds will be able to run
both in parallel speeding up the process.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
commit d585ba47fc
Author: Noah Goldstein <goldstein.w.n@gmail.com>
Date: Mon Nov 1 00:49:48 2021 -0500
string: Make tests birdirectional test-memcpy.c
This commit updates the memcpy tests to test both dst > src and dst <
src. This is because there is logic in the code based on the
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
significantly increased the number of tests. On Intel Core i7-1165G7,
test-memcpy takes 120 seconds to run when machine is idle. Double
TIMEOUT to (8 * 60) for test-memcpy to avoid timeout when machine is
under heavy load.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This commit updates the memcpy tests to test both dst > src and dst <
src. This is because there is logic in the code based on the
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
No bug. This commit just adds __memcmpeq as a build target so that
implementations for __memcmpeq that are not just aliases to memcmp can
be supported.
