It shows both throughput (total bytes obtained in the test duration)
and latecy for both arc4random and arc4random_buf with different
sizes.
Checked on x86_64-linux-gnu, aarch64-linux, and powerpc64le-linux-gnu.
Add a second iteration for memrchr to set `pos` starting from the end
of the buffer.
Previously `pos` was only set relative to the beginning of the
buffer. This isn't really useful for memrchr because the beginning
of the search space is (buf + len).
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
1. Use json_ctx for output to help standardize format across all
benchtests.
2. Add some additional tests to strstr and memchr expanding alignments
and adding more small values.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
1. Output results in json format so its easier to parse
2. Increase max alignment to `getpagesize () - 1` to make it possible
to test page cross cases.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Unroll slightly and enforce good instruction scheduling. This improves
performance on out-of-order machines. The unrolling allows for
pipelined multiplies.
As well, as an optional sysdep, reorder the operations and prevent
reassosiation for better scheduling and higher ILP. This commit
only adds the barrier for x86, although it should be either no
change or a win for any architecture.
Unrolling further started to induce slowdowns for sizes [0, 4]
but can help the loop so if larger sizes are the target further
unrolling can be beneficial.
Results for _dl_new_hash
Benchmarked on Tigerlake: 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz
Time as Geometric Mean of N=30 runs
Geometric of all benchmark New / Old: 0.674
type, length, New Time, Old Time, New Time / Old Time
fixed, 0, 2.865, 2.72, 1.053
fixed, 1, 3.567, 2.489, 1.433
fixed, 2, 2.577, 3.649, 0.706
fixed, 3, 3.644, 5.983, 0.609
fixed, 4, 4.211, 6.833, 0.616
fixed, 5, 4.741, 9.372, 0.506
fixed, 6, 5.415, 9.561, 0.566
fixed, 7, 6.649, 10.789, 0.616
fixed, 8, 8.081, 11.808, 0.684
fixed, 9, 8.427, 12.935, 0.651
fixed, 10, 8.673, 14.134, 0.614
fixed, 11, 10.69, 15.408, 0.694
fixed, 12, 10.789, 16.982, 0.635
fixed, 13, 12.169, 18.411, 0.661
fixed, 14, 12.659, 19.914, 0.636
fixed, 15, 13.526, 21.541, 0.628
fixed, 16, 14.211, 23.088, 0.616
fixed, 32, 29.412, 52.722, 0.558
fixed, 64, 65.41, 142.351, 0.459
fixed, 128, 138.505, 295.625, 0.469
fixed, 256, 291.707, 601.983, 0.485
random, 2, 12.698, 12.849, 0.988
random, 4, 16.065, 15.857, 1.013
random, 8, 19.564, 21.105, 0.927
random, 16, 23.919, 26.823, 0.892
random, 32, 31.987, 39.591, 0.808
random, 64, 49.282, 71.487, 0.689
random, 128, 82.23, 145.364, 0.566
random, 256, 152.209, 298.434, 0.51
Co-authored-by: Alexander Monakov <amonakov@ispras.ru>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Add a simple benchmark that measures wcrtomb performance with various
locales with 1-4 byte characters.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Improve libmvec benchmark integration so that in future other
architectures may be able to run their libmvec benchmarks as well. This
now allows libmvec benchmarks to be run with `make BENCHSET=bench-math`.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The libmvec benchmarks print a message indicating that a certain CPU
feature is unsupported and exit prematurelyi, which breaks the JSON in
bench.out.
Handle this more elegantly in the bench makefile target by adding
support for an UNSUPPORTED exit status (77) so that bench.out continues
to have output for valid tests.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Benchmark for testing pthread mutex locks performance with different
threads and critical sections.
The test configuration consists of 3 parts:
1. thread number
2. critical-section length
3. non-critical-section length
Thread number starts from 1 and increased by 2x until num of CPU cores
(nprocs). An additional over-saturation case (1.25 * nprocs) is also
included.
Critical-section is represented by a loop of shared do_filler(),
length can be determined by the loop iters.
Non-critical-section is similiar to the critical-section, except it's
based on non-shared do_filler().
Currently, adaptive pthread_mutex lock is tested.
1. Use json-lib for printing results.
2. Expose all parameters (before pos, seek_char, and max_char where
not printed).
3. Add benchmarks that test multiple occurence of seek_char in the
string.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Add benchmark that randomizes whether return should be NULL or pointer
to CHAR. The rationale is on many architectures there is a choice
between a predicate execution option (i.e cmovcc on x86) or a branch.
On x86 the results for cmovcc vs branch are something along the lines
of the following:
perc-zero, Br On Result, Time Br / Time cmov
0.10, 1, ,0.983
0.10, 0, ,1.246
0.25, 1, ,1.035
0.25, 0, ,1.49
0.33, 1, ,1.016
0.33, 0, ,1.579
0.50, 1, ,1.228
0.50, 0, ,1.739
0.66, 1, ,1.039
0.66, 0, ,1.764
0.75, 1, ,0.996
0.75, 0, ,1.642
0.90, 1, ,1.071
0.90, 0, ,1.409
1.00, 1, ,0.937
1.00, 0, ,0.999
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Use "=" instead of ":=" to allow sysdeps Makefiles to add more benches
to bench and benchset. This fixes BZ #28970.
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
Commit ac759b1fbf added attribute
"overlap" to bench-memmove-walk, whose value is a string. This change
makes compare_strings.py fail since benchout_strings.schema.json
requires the values of attributes to be number.
This patch relaxes such constraint.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Small sizes (<= 64) represent large portion of memset usages with zero
value. Add sizes (<= 64) to bench-bzero-walk.c to cover small sizes.
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
memset with zero as the value to set is by far the majority value (99%+
for Python3 and GCC). Add bench-memset-zero-large.c,
bench-memset-zero-walk.c and bench-memset-zero.c to measure memset
implementations for zeroing.
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
Zero is a relevant size for some workloads (roughly 5% of uses for
GCC) so we should be testing it's performance as well.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Add more small and medium sized tests for strcmp and strncmp.
As well for strcmp add option for more direct control of
alignment. Previously alignment was being pushed to the end of the
page. While this is the most difficult case to implement, it is far
from the common case and so shouldn't be the only benchmark.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
This commit adds a new partial overlap benchmark. This is generally
the most interesting performance case for memmove and was missing.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
This commit adds more benchmarks for the common memcpy/memmove
benchmarks. The most signifcant cases are the half page offsets. The
current versions leaves dst and src near page aligned which leads to
false 4k aliasing on x86_64. This can add noise due to false
dependencies from one run to the next. As well, this seems like more
of an edge case that common case so it shouldn't be the only thing
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Based on random input arguments. About 85% tuples have exponents
of the two arguments close together (+-1 range).
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Instead of inputs based on the algorithm implementation details.
About 85% tuples have exponents of the two arguments close
together (+-1 range).
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Add acosf function to bench-math and copy acosf-inputs to benchtests.
Motivation for this patch is to prepare for upcoming libmvec new
functions. Float and double version of libmvec functions stays
together.
acosf-inputs file generated from acos-inputs file using following
scaling formula:
f = d * (FLT_MAX/DBL_MAX)
Where d is input(double) and f is output(float). If scaled float value
is duplicate in new input file, nextafterf() function used to find next
float value, ensuring no duplicates.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Improve the random memcpy benchmark. Double the number of tests and increase
the size of the memory region to test between 32KB and 1024KB. This improves
accuracy on modern cores. Clean up formatting of the frequency array.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
No bug. This commit adds __memcmpeq benchmarks. The benchmarks just
use the existing ones in memcmp. This will be useful for testing
implementations of __memcmpeq that do not just alias memcmp.
No bug.
This commit adds new medium size cases for lengths in [512, 1024). As
well it increase the iters to INNER_LOOP_ITERS_LARGE for more reliable
results.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Building benchmarks as static executables:
=========================================
To build benchmarks as static executables, on the build system, run:
$ make STATIC-BENCHTESTS=yes bench-build
You can copy benchmark executables to another machine and run them
without copying the source nor build directories.
No bug. Remove reallocation of bufs between implementation tests. Move
initialization outside of foreach implementation test loop. Increase
iteration count.
Generally before this commit was seeing a great deal of variability
between runs. The goal of this commit is to make the results more
reliable.
Benchtests build and bench-memcmp succeeding.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
This patch fixed validate_benchout.py two exceptions,
1) AttributeError
if benchout_strings.schema.json is specified, and
2) json.decoder.JSONDecodeError
if benchout file is not JSON.
$ ~/glibc/benchtests/scripts/validate_benchout.py bench-memset.out \
~/glibc/benchtests/scripts/benchout_strings.schema.json
Traceback (most recent call last):
File "/home/naohirot/glibc/benchtests/scripts/validate_benchout.py", line 86, in <module>
sys.exit(main(sys.argv[1:]))
File "/home/naohirot/glibc/benchtests/scripts/validate_benchout.py", line 69, in main
bench.parse_bench(args[0], args[1])
File "/home/naohirot/glibc/benchtests/scripts/import_bench.py", line 139, in parse_bench
do_for_all_timings(bench, lambda b, f, v:
File "/home/naohirot/glibc/benchtests/scripts/import_bench.py", line 107, in do_for_all_timings
if 'timings' not in bench['functions'][func][k].keys():
AttributeError: 'str' object has no attribute 'keys'
$ ~/glibc/benchtests/scripts/validate_benchout.py bench-math-inlines.out \
~/glibc/benchtests/scripts/benchout_strings.schema.json
Traceback (most recent call last):
File "/home/naohirot/glibc/benchtests/scripts/validate_benchout.py", line 86, in <module>
sys.exit(main(sys.argv[1:]))
File "/home/naohirot/glibc/benchtests/scripts/validate_benchout.py", line 69, in main
bench.parse_bench(args[0], args[1])
File "/home/naohirot/glibc/benchtests/scripts/import_bench.py", line 137, in parse_bench
bench = json.load(benchfile)
File "/usr/lib/python3.6/json/__init__.py", line 299, in load
parse_constant=parse_constant, object_pairs_hook=object_pairs_hook, **kw)
File "/usr/lib/python3.6/json/__init__.py", line 354, in loads
return _default_decoder.decode(s)
File "/usr/lib/python3.6/json/decoder.py", line 342, in decode
raise JSONDecodeError("Extra data", s, end)
json.decoder.JSONDecodeError: Extra data: line 1 column 17 (char 16)
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
This patch removed redundant "#include <assert.h>" from
bench-memset-large.c and bench-memset-walk.c.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
This patch enables scripts/plot_strings.py to read a benchmark result
file from stdin.
To keep backward compatibility, that is to keep accepting multiple of
benchmark result files in argument, blank argument doesn't mean stdin,
but '-' does.
Therefore nargs parameter of ArgumentParser.add_argument() method is
not changed to '?', but keep '+'.
ex:
$ jq '.' bench-memset.out | plot_strings.py -
$ jq '.' bench-memset.out | plot_strings.py - bench-memset-large.out
$ plot_strings.py bench-memset.out bench-memset-large.out
error ex:
$ jq '.' bench-memset.out | plot_strings.py
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
They provide TLS_GD/TLS_LD/TLS_IE/TLS_IE macros for TLS testing. Now
that we have migrated to __thread and tls_model attributes, these macros
are unused and the tls-macros.h files can retire.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
These comments refer to slow paths that were removed in
glibc 2.34 or earlier. The corresponding "names" that yield
separate workload traces for "make bench" are thus obsolete.
We are however keeping the corresponding inputs.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
