Commit Graph

789 Commits

Author SHA1 Message Date
Paul Pluzhnikov
8ae4bb5a38 Cleanup: add missing #include's
* libio/fileops.c: Add missing sys/mman.h
	* libio/iopopen.c: Add missing fcntl.h, remove redundant unistd.h
2015-02-17 16:03:41 -08:00
Roland McGrath
b65c0ff9fc Fix libio/tst-atime not to presume ST_NOATIME exists. 2015-02-06 12:24:16 -08:00
Joseph Myers
b168057aaa Update copyright dates with scripts/update-copyrights. 2015-01-02 16:29:47 +00:00
H.J. Lu
41fad83083 Replace %ld with %jd and cast to intmax_t 2014-12-30 08:05:47 -08:00
Stefan Liebler
eca2772b9a Get rid of format warning in tst-widetext.c. 2014-12-17 16:42:51 +01:00
Arjun Shankar
8b460906cd Modify libio/tst-fopenloc.c to use test-skeleton.c
This test would earlier fail when run under test-skeleton.c due to
bug #17522 in 'fputws'. That bug is now fixed and so this test may
be modified.
2014-12-16 16:55:23 +05:30
Joseph Myers
1b8bf35181 Fix tst-ftell-active-handler.c warning.
A recent change to libio/tst-ftell-active-handler.c (postdating my
last check for warnings on x86) introduced a format warning from a
long int variable used with a %zu format.  This patch fixes it by
using %ld for the format to match the variable.

Tested for x86.

	* libio/tst-ftell-active-handler.c (do_ftruncate_test): Use %ld
	format for long int variable.
2014-12-10 16:03:23 +00:00
Adhemerval Zanella
2aa3862e86 libio: Fix variable aligment in tst-ftell-active-handler
This patch fixes a stack allocated variable to force it to have wchar_t
alignment.
2014-12-08 07:20:07 -05:00
Adhemerval Zanella
9752c3cdbc libio: Fix buffer overrun in tst-ftell-active-handler
On 'do_ftell_test' the code:

365           if (test_modes[i].fd_mode != O_WRONLY)
366             {
367               char tmpbuf[data_len];
368
369               rewind (fp);
370
371               while (fgets_func (tmpbuf, sizeof (tmpbuf), fp) && !feof (fp));

The 'data_len' is calculated with wsclen and allocated as 'char'.  The
subsequent fgetws will then try to write at most 'data_len' wchar_t
in a buffer with just data_len 'char'.  This patch fixes it by
allocating the tmpbuf using 'wchar_t' * data_len bytes.
2014-12-05 07:41:22 -05:00
Siddhesh Poyarekar
24b9788285 Fix up function definition style
Don't use K&R style for function definitions.
2014-12-04 08:45:55 +05:30
Siddhesh Poyarekar
fe8b4d98e9 Reset cached offset when reading to end of stream (BZ #17653)
POSIX allows applications to switch file handles when a read results
in an end of file.  Unset the cached offset at this point so that it
is queried again.
2014-12-04 08:13:28 +05:30
Siddhesh Poyarekar
61b4f792e0 tst-ftell-active-handler: Open file with O_TRUNC for w modes
The test case fails to truncate the file when a file is intended to be
opened in w or w+ mode.  Add O_TRUNC to fix this.  The test still
succeeds with this change.
2014-12-04 08:11:07 +05:30
Siddhesh Poyarekar
be349d7042 ftell: seek to end only when there are unflushed bytes (BZ #17647)
Currently we seek to end of file if there are unflushed writes or the
stream is in write mode, to get the current offset for writing in
append mode, which is the end of file.  The latter case (i.e. stream
is in write mode, but no unflushed writes) is unnecessary since it
will only happen when the stream has just been flushed, in which case
the recorded offset ought to be reliable.

Removing that case lets ftell give the correct offset when it follows
an ftruncate.  The latter truncates the file, but does not change the
file position, due to which it is permissible to call ftell without an
intervening fseek call.

Tested on x86_64 to verify that the added test case fails without the
patch and succeeds with it, and that there are no additional
regressions due to it.

	[BZ #17647]
	* libio/fileops.c (do_ftell): Seek only when there are
	unflushed writes.
	* libio/wfileops.c (do_ftell_wide): Likewise.
	* libio/tst-ftell-active-handler.c (do_ftruncate_test): New
	test case.
	(do_one_test): Call it.
2014-12-04 08:08:37 +05:30
Joseph Myers
49051f8ea4 Fix libio/bug-ungetwc1.c warning.
This patch fixes a warning "variable 'wc' set but not used" in
libio/bug-ungetwc1.c.

The test didn't verify much about the results of the functions it
called.  This patch makes it check the result of getwc (thereby fixing
the warning), check end of file does not arrive too late in the getwc
loop, and check EOF is no longer set after ungetwc.

Tested for x86_64.

	* libio/bug-ungetwc1.c (do_test): Verify results of getwc and
	feof.
2014-11-27 16:01:04 +00:00
Joseph Myers
12da14a591 Fix warnings in fwscanf / rewind tests.
This patch fixes "set but not used" warnings in the tests
libio/bug-rewind.c and libio/bug-rewind2.c by checking the return
values from fwscanf and making the tests fail if those values aren't
as expected.

Tested for x86_64.

	* libio/bug-rewind.c (do_test): Check fwscanf return values.
	* libio/bug-rewind2.c (do_test): Likewise.
2014-11-26 12:54:39 +00:00
Siddhesh Poyarekar
4f41c682f3 Remove NOT_IN_libc
Replace with !IS_IN (libc).  This completes the transition from
the IS_IN/NOT_IN macros to the IN_MODULE macro set.

The generated code is unchanged on x86_64.

	* stdlib/isomac.c (fmt): Replace NOT_IN_libc with IN_MODULE.
	(get_null_defines): Adjust.
	* sunrpc/Makefile: Adjust comment.
	* Makerules (CPPFLAGS-nonlib): Remove NOT_IN_libc.
	* elf/Makefile (CPPFLAGS-sotruss-lib): Likewise.
	(CFLAGS-interp.c): Likewise.
	(CFLAGS-ldconfig.c): Likewise.
	(CPPFLAGS-.os): Likewise.
	* elf/rtld-Rules (rtld-CPPFLAGS): Likewise.
	* extra-lib.mk (CPPFLAGS-$(lib)): Likewise.
	* extra-modules.mk (extra-modules.mk): Likewise.
	* iconv/Makefile (CPPFLAGS-iconvprogs): Likewise.
	* locale/Makefile (CPPFLAGS-locale_programs): Likewise.
	* malloc/Makefile (CPPFLAGS-memusagestat): Likewise.
	* nscd/Makefile (CPPFLAGS-nscd): Likewise.
	* nss/Makefile (CPPFLAGS-nss_test1): Likewise.
	* stdlib/Makefile (CFLAGS-tst-putenvmod.c): Likewise.
	* sysdeps/gnu/Makefile ($(objpfx)errlist-compat.c): Likewise.
	* sysdeps/unix/sysv/linux/Makefile (CPPFLAGS-lddlibc4): Likewise.
	* iconvdata/Makefile (CPPFLAGS): Likewise.
	(cpp-srcs-left): Add libof for all iconvdata routines.
	* bits/stdio-lock.h: Replace NOT_IN_libc with IS_IN.
	* include/assert.h: Likewise.
	* include/ctype.h: Likewise.
	* include/errno.h: Likewise.
	* include/libc-symbols.h: Likewise.
	* include/math.h: Likewise.
	* include/netdb.h: Likewise.
	* include/resolv.h: Likewise.
	* include/stdio.h: Likewise.
	* include/stdlib.h: Likewise.
	* include/string.h: Likewise.
	* include/sys/stat.h: Likewise.
	* include/wctype.h: Likewise.
	* intl/l10nflist.c: Likewise.
	* libidn/idn-stub.c: Likewise.
	* libio/libioP.h: Likewise.
	* nptl/libc_multiple_threads.c: Likewise.
	* nptl/pthreadP.h: Likewise.
	* posix/regex_internal.h: Likewise.
	* resolv/res_hconf.c: Likewise.
	* sysdeps/arm/armv7/multiarch/memcpy.S: Likewise.
	* sysdeps/arm/memmove.S: Likewise.
	* sysdeps/arm/sysdep.h: Likewise.
	* sysdeps/generic/_itoa.h: Likewise.
	* sysdeps/generic/symbol-hacks.h: Likewise.
	* sysdeps/gnu/errlist.awk: Likewise.
	* sysdeps/gnu/errlist.c: Likewise.
	* sysdeps/i386/i586/memcpy.S: Likewise.
	* sysdeps/i386/i586/memset.S: Likewise.
	* sysdeps/i386/i686/memcpy.S: Likewise.
	* sysdeps/i386/i686/memmove.S: Likewise.
	* sysdeps/i386/i686/mempcpy.S: Likewise.
	* sysdeps/i386/i686/memset.S: Likewise.
	* sysdeps/i386/i686/multiarch/bcopy.S: Likewise.
	* sysdeps/i386/i686/multiarch/bzero.S: Likewise.
	* sysdeps/i386/i686/multiarch/memchr-sse2-bsf.S: Likewise.
	* sysdeps/i386/i686/multiarch/memchr-sse2.S: Likewise.
	* sysdeps/i386/i686/multiarch/memchr.S: Likewise.
	* sysdeps/i386/i686/multiarch/memcmp-sse4.S: Likewise.
	* sysdeps/i386/i686/multiarch/memcmp-ssse3.S: Likewise.
	* sysdeps/i386/i686/multiarch/memcmp.S: Likewise.
	* sysdeps/i386/i686/multiarch/memcpy-ssse3-rep.S: Likewise.
	* sysdeps/i386/i686/multiarch/memcpy-ssse3.S: Likewise.
	* sysdeps/i386/i686/multiarch/memcpy.S: Likewise.
	* sysdeps/i386/i686/multiarch/memcpy_chk.S: Likewise.
	* sysdeps/i386/i686/multiarch/memmove.S: Likewise.
	* sysdeps/i386/i686/multiarch/memmove_chk.S: Likewise.
	* sysdeps/i386/i686/multiarch/mempcpy.S: Likewise.
	* sysdeps/i386/i686/multiarch/mempcpy_chk.S: Likewise.
	* sysdeps/i386/i686/multiarch/memrchr-c.c: Likewise.
	* sysdeps/i386/i686/multiarch/memrchr-sse2-bsf.S: Likewise.
	* sysdeps/i386/i686/multiarch/memrchr-sse2.S: Likewise.
	* sysdeps/i386/i686/multiarch/memrchr.S: Likewise.
	* sysdeps/i386/i686/multiarch/memset-sse2-rep.S: Likewise.
	* sysdeps/i386/i686/multiarch/memset-sse2.S: Likewise.
	* sysdeps/i386/i686/multiarch/memset.S: Likewise.
	* sysdeps/i386/i686/multiarch/memset_chk.S: Likewise.
	* sysdeps/i386/i686/multiarch/rawmemchr.S: Likewise.
	* sysdeps/i386/i686/multiarch/strcat-sse2.S: Likewise.
	* sysdeps/i386/i686/multiarch/strcat-ssse3.S: Likewise.
	* sysdeps/i386/i686/multiarch/strcat.S: Likewise.
	* sysdeps/i386/i686/multiarch/strchr-sse2-bsf.S: Likewise.
	* sysdeps/i386/i686/multiarch/strchr-sse2.S: Likewise.
	* sysdeps/i386/i686/multiarch/strchr.S: Likewise.
	* sysdeps/i386/i686/multiarch/strcmp-sse4.S: Likewise.
	* sysdeps/i386/i686/multiarch/strcmp-ssse3.S: Likewise.
	* sysdeps/i386/i686/multiarch/strcmp.S: Likewise.
	* sysdeps/i386/i686/multiarch/strcpy-sse2.S: Likewise.
	* sysdeps/i386/i686/multiarch/strcpy-ssse3.S: Likewise.
	* sysdeps/i386/i686/multiarch/strcpy.S: Likewise.
	* sysdeps/i386/i686/multiarch/strcspn.S: Likewise.
	* sysdeps/i386/i686/multiarch/strlen-sse2-bsf.S: Likewise.
	* sysdeps/i386/i686/multiarch/strlen-sse2.S: Likewise.
	* sysdeps/i386/i686/multiarch/strlen.S: Likewise.
	* sysdeps/i386/i686/multiarch/strnlen.S: Likewise.
	* sysdeps/i386/i686/multiarch/strrchr-sse2-bsf.S: Likewise.
	* sysdeps/i386/i686/multiarch/strrchr-sse2.S: Likewise.
	* sysdeps/i386/i686/multiarch/strrchr.S: Likewise.
	* sysdeps/i386/i686/multiarch/strspn.S: Likewise.
	* sysdeps/i386/i686/multiarch/wcschr-c.c: Likewise.
	* sysdeps/i386/i686/multiarch/wcschr-sse2.S: Likewise.
	* sysdeps/i386/i686/multiarch/wcschr.S: Likewise.
	* sysdeps/i386/i686/multiarch/wcscmp-sse2.S: Likewise.
	* sysdeps/i386/i686/multiarch/wcscmp.S: Likewise.
	* sysdeps/i386/i686/multiarch/wcscpy-c.c: Likewise.
	* sysdeps/i386/i686/multiarch/wcscpy-ssse3.S: Likewise.
	* sysdeps/i386/i686/multiarch/wcscpy.S: Likewise.
	* sysdeps/i386/i686/multiarch/wcslen-c.c: Likewise.
	* sysdeps/i386/i686/multiarch/wcslen-sse2.S: Likewise.
	* sysdeps/i386/i686/multiarch/wcslen.S: Likewise.
	* sysdeps/i386/i686/multiarch/wcsrchr-c.c: Likewise.
	* sysdeps/i386/i686/multiarch/wcsrchr-sse2.S: Likewise.
	* sysdeps/i386/i686/multiarch/wcsrchr.S: Likewise.
	* sysdeps/i386/i686/multiarch/wmemcmp-c.c: Likewise.
	* sysdeps/i386/i686/multiarch/wmemcmp.S: Likewise.
	* sysdeps/ia64/fpu/libm-symbols.h: Likewise.
	* sysdeps/nptl/bits/libc-lock.h: Likewise.
	* sysdeps/nptl/bits/libc-lockP.h: Likewise.
	* sysdeps/nptl/bits/stdio-lock.h: Likewise.
	* sysdeps/posix/closedir.c: Likewise.
	* sysdeps/posix/opendir.c: Likewise.
	* sysdeps/posix/readdir.c: Likewise.
	* sysdeps/posix/rewinddir.c: Likewise.
	* sysdeps/powerpc/novmx-sigjmp.c: Likewise.
	* sysdeps/powerpc/powerpc32/__longjmp.S: Likewise.
	* sysdeps/powerpc/powerpc32/bsd-_setjmp.S: Likewise.
	* sysdeps/powerpc/powerpc32/fpu/__longjmp.S: Likewise.
	* sysdeps/powerpc/powerpc32/fpu/setjmp.S: Likewise.
	* sysdeps/powerpc/powerpc32/power4/multiarch/bzero.c: Likewise.
	* sysdeps/powerpc/powerpc32/power4/multiarch/memchr.c: Likewise.
	* sysdeps/powerpc/powerpc32/power4/multiarch/memcmp-ppc32.S: Likewise.
	* sysdeps/powerpc/powerpc32/power4/multiarch/memcmp.c: Likewise.
	* sysdeps/powerpc/powerpc32/power4/multiarch/memcpy-ppc32.S: Likewise.
	* sysdeps/powerpc/powerpc32/power4/multiarch/memcpy.c: Likewise.
	* sysdeps/powerpc/powerpc32/power4/multiarch/memmove.c: Likewise.
	* sysdeps/powerpc/powerpc32/power4/multiarch/mempcpy.c: Likewise.
	* sysdeps/powerpc/powerpc32/power4/multiarch/memrchr-ppc32.c: Likewise.
	* sysdeps/powerpc/powerpc32/power4/multiarch/memrchr.c: Likewise.
	* sysdeps/powerpc/powerpc32/power4/multiarch/memset-ppc32.S: Likewise.
	* sysdeps/powerpc/powerpc32/power4/multiarch/memset.c: Likewise.
	* sysdeps/powerpc/powerpc32/power4/multiarch/rawmemchr.c: Likewise.
	* sysdeps/powerpc/powerpc32/power4/multiarch/strcasecmp.c: Likewise.
	* sysdeps/powerpc/powerpc32/power4/multiarch/strcasecmp_l.c: Likewise.
	* sysdeps/powerpc/powerpc32/power4/multiarch/strchr.c: Likewise.
	* sysdeps/powerpc/powerpc32/power4/multiarch/strchrnul.c: Likewise.
	* sysdeps/powerpc/powerpc32/power4/multiarch/strlen-ppc32.S: Likewise.
	* sysdeps/powerpc/powerpc32/power4/multiarch/strlen.c: Likewise.
	* sysdeps/powerpc/powerpc32/power4/multiarch/strncase.c: Likewise.
	* sysdeps/powerpc/powerpc32/power4/multiarch/strncase_l.c: Likewise.
	* sysdeps/powerpc/powerpc32/power4/multiarch/strncmp-ppc32.S: Likewise.
	* sysdeps/powerpc/powerpc32/power4/multiarch/strncmp.c: Likewise.
	* sysdeps/powerpc/powerpc32/power4/multiarch/strnlen.c: Likewise.
	* sysdeps/powerpc/powerpc32/power4/multiarch/wcschr-ppc32.c: Likewise.
	* sysdeps/powerpc/powerpc32/power4/multiarch/wcschr.c: Likewise.
	* sysdeps/powerpc/powerpc32/power4/multiarch/wcscpy-ppc32.c: Likewise.
	* sysdeps/powerpc/powerpc32/power4/multiarch/wcscpy.c: Likewise.
	* sysdeps/powerpc/powerpc32/power4/multiarch/wcsrchr-ppc32.c: Likewise.
	* sysdeps/powerpc/powerpc32/power4/multiarch/wcsrchr.c: Likewise.
	* sysdeps/powerpc/powerpc32/power4/multiarch/wordcopy.c: Likewise.
	* sysdeps/powerpc/powerpc32/power6/memset.S: Likewise.
	* sysdeps/powerpc/powerpc32/setjmp.S: Likewise.
	* sysdeps/powerpc/powerpc64/__longjmp.S: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/bzero.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/memchr.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/memcmp-ppc64.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/memcmp.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/memcpy-ppc64.S: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/memcpy.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/memmove-ppc64.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/memmove.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/mempcpy.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/memrchr.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/memset-ppc64.S: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/memset.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/rawmemchr.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/stpcpy-ppc64.S: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/stpcpy.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/stpncpy.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/strcasecmp.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/strcasecmp_l.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/strcat.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/strchr.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/strchrnul.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/strcmp-ppc64.S: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/strcmp.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/strcpy-ppc64.S: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/strcpy.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/strcspn.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/strlen-ppc64.S: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/strlen.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/strncase.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/strncase_l.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/strncat.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/strncmp-ppc64.S: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/strncmp.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/strncpy-ppc64.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/strncpy.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/strnlen.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/strpbrk.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/strrchr-ppc64.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/strrchr.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/strspn-ppc64.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/strspn.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/wcschr.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/wcscpy.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/wcsrchr.c: Likewise.
	* sysdeps/powerpc/powerpc64/multiarch/wordcopy.c: Likewise.
	* sysdeps/powerpc/powerpc64/setjmp.S: Likewise.
	* sysdeps/s390/s390-32/multiarch/ifunc-resolve.c: Likewise.
	* sysdeps/s390/s390-32/multiarch/memcmp.S: Likewise.
	* sysdeps/s390/s390-32/multiarch/memcpy.S: Likewise.
	* sysdeps/s390/s390-32/multiarch/memset.S: Likewise.
	* sysdeps/s390/s390-64/multiarch/ifunc-resolve.c: Likewise.
	* sysdeps/s390/s390-64/multiarch/memcmp.S: Likewise.
	* sysdeps/s390/s390-64/multiarch/memcpy.S: Likewise.
	* sysdeps/s390/s390-64/multiarch/memset.S: Likewise.
	* sysdeps/sparc/sparc64/multiarch/memcpy-niagara1.S: Likewise.
	* sysdeps/sparc/sparc64/multiarch/memcpy-niagara2.S: Likewise.
	* sysdeps/sparc/sparc64/multiarch/memcpy-niagara4.S: Likewise.
	* sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: Likewise.
	* sysdeps/sparc/sparc64/multiarch/memcpy.S: Likewise.
	* sysdeps/sparc/sparc64/multiarch/memset-niagara1.S: Likewise.
	* sysdeps/sparc/sparc64/multiarch/memset-niagara4.S: Likewise.
	* sysdeps/sparc/sparc64/multiarch/memset.S: Likewise.
	* sysdeps/unix/alpha/sysdep.S: Likewise.
	* sysdeps/unix/alpha/sysdep.h: Likewise.
	* sysdeps/unix/make-syscalls.sh: Likewise.
	* sysdeps/unix/sysv/linux/aarch64/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/aarch64/sysdep.h: Likewise.
	* sysdeps/unix/sysv/linux/alpha/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/alpha/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/arm/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/arm/sysdep.h: Likewise.
	* sysdeps/unix/sysv/linux/getpid.c: Likewise.
	* sysdeps/unix/sysv/linux/hppa/nptl/lowlevellock.h: Likewise.
	* sysdeps/unix/sysv/linux/hppa/nptl/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/i386/i486/lowlevellock.S: Likewise.
	* sysdeps/unix/sysv/linux/i386/lowlevellock.h: Likewise.
	* sysdeps/unix/sysv/linux/i386/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/i386/sysdep.h: Likewise.
	* sysdeps/unix/sysv/linux/ia64/lowlevellock.h: Likewise.
	* sysdeps/unix/sysv/linux/ia64/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/ia64/sysdep.S: Likewise.
	* sysdeps/unix/sysv/linux/ia64/sysdep.h: Likewise.
	* sysdeps/unix/sysv/linux/lowlevellock-futex.h: Likewise.
	* sysdeps/unix/sysv/linux/m68k/bits/m68k-vdso.h: Likewise.
	* sysdeps/unix/sysv/linux/m68k/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/m68k/sysdep.h: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/lowlevellock.h: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/mips/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/not-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/lowlevellock.h: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/s390/longjmp_chk.c: Likewise.
	* sysdeps/unix/sysv/linux/s390/lowlevellock.h: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/sysdep.S: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/sysdep.h: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/sysdep.S: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/sysdep.h: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/sh/lowlevellock.S: Likewise.
	* sysdeps/unix/sysv/linux/sh/lowlevellock.h: Likewise.
	* sysdeps/unix/sysv/linux/sh/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/sh/sysdep.h: Likewise.
	* sysdeps/unix/sysv/linux/sh/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/sparc/lowlevellock.h: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/sysdep.h: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/brk.S: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/sysdep.h: Likewise.
	* sysdeps/unix/sysv/linux/tile/lowlevellock.h: Likewise.
	* sysdeps/unix/sysv/linux/tile/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/tile/sysdep.h: Likewise.
	* sysdeps/unix/sysv/linux/tile/waitpid.S: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/lowlevellock.S: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/lowlevellock.h: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/sysdep-cancel.h: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/sysdep.h: Likewise.
	* sysdeps/wordsize-32/symbol-hacks.h: Likewise.
	* sysdeps/x86_64/memcpy.S: Likewise.
	* sysdeps/x86_64/memmove.c: Likewise.
	* sysdeps/x86_64/memset.S: Likewise.
	* sysdeps/x86_64/multiarch/init-arch.h: Likewise.
	* sysdeps/x86_64/multiarch/memcmp-sse4.S: Likewise.
	* sysdeps/x86_64/multiarch/memcmp-ssse3.S: Likewise.
	* sysdeps/x86_64/multiarch/memcmp.S: Likewise.
	* sysdeps/x86_64/multiarch/memcpy-avx-unaligned.S: Likewise.
	* sysdeps/x86_64/multiarch/memcpy-ssse3-back.S: Likewise.
	* sysdeps/x86_64/multiarch/memcpy-ssse3.S: Likewise.
	* sysdeps/x86_64/multiarch/memcpy.S: Likewise.
	* sysdeps/x86_64/multiarch/memcpy_chk.S: Likewise.
	* sysdeps/x86_64/multiarch/memmove.c: Likewise.
	* sysdeps/x86_64/multiarch/mempcpy.S: Likewise.
	* sysdeps/x86_64/multiarch/mempcpy_chk.S: Likewise.
	* sysdeps/x86_64/multiarch/memset-avx2.S: Likewise.
	* sysdeps/x86_64/multiarch/memset.S: Likewise.
	* sysdeps/x86_64/multiarch/memset_chk.S: Likewise.
	* sysdeps/x86_64/multiarch/strcat-sse2-unaligned.S: Likewise.
	* sysdeps/x86_64/multiarch/strcat-ssse3.S: Likewise.
	* sysdeps/x86_64/multiarch/strcat.S: Likewise.
	* sysdeps/x86_64/multiarch/strchr-sse2-no-bsf.S: Likewise.
	* sysdeps/x86_64/multiarch/strchr.S: Likewise.
	* sysdeps/x86_64/multiarch/strcmp-ssse3.S: Likewise.
	* sysdeps/x86_64/multiarch/strcmp.S: Likewise.
	* sysdeps/x86_64/multiarch/strcpy-sse2-unaligned.S: Likewise.
	* sysdeps/x86_64/multiarch/strcpy-ssse3.S: Likewise.
	* sysdeps/x86_64/multiarch/strcpy.S: Likewise.
	* sysdeps/x86_64/multiarch/strcspn.S: Likewise.
	* sysdeps/x86_64/multiarch/strspn.S: Likewise.
	* sysdeps/x86_64/multiarch/wcscpy-c.c: Likewise.
	* sysdeps/x86_64/multiarch/wcscpy-ssse3.S: Likewise.
	* sysdeps/x86_64/multiarch/wcscpy.S: Likewise.
	* sysdeps/x86_64/multiarch/wmemcmp-c.c: Likewise.
	* sysdeps/x86_64/multiarch/wmemcmp.S: Likewise.
	* sysdeps/x86_64/strcmp.S: Likewise.
2014-11-24 15:03:45 +05:30
Joseph Myers
c4eae75271 Fix __get_nprocs fgets_unlocked namespace (bug 17582).
__get_nprocs is called from malloc code, but calls fgets_unlocked,
which is not an ISO C or POSIX function.  This patch fixes it to call
a new __fgets_unlocked name instead.

Note: there are various other uses of fgets_unlocked in glibc's
libraries, and I haven't yet investigated which others might also be
problematic (called directly or indirectly from standard functions)
and so need to change to use __fgets_unlocked.

Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by the patch).

	[BZ #17582]
	* libio/iofgets.c [weak_alias && !_IO_MTSAFE_IO]
	(__fgets_unlocked): Add alias of _IO_fgets.  Use libc_hidden_def.
	* libio/iofgets_u.c (fgets_unlocked): Rename to __fgets_unlocked
	and define as weak alias of __fgets_unlocked.  Use
	libc_hidden_weak.
	(__fgets_unlocked): Use libc_hidden_def.
	* include/stdio.h (__fgets_unlocked): Declare.  Use
	libc_hidden_proto.
	* sysdeps/unix/sysv/linux/getsysstats.c (phys_pages_info): Use
	__fgets_unlocked instead of fgets_unlocked.
	* sysdeps/unix/sysv/linux/alpha/getsysstats.c
	(GET_NPROCS_CONF_PARSER): Likewise.
	* sysdeps/unix/sysv/linux/sparc/getsysstats.c
	(GET_NPROCS_CONF_PARSER): Likewise.
2014-11-12 22:39:36 +00:00
Joseph Myers
5a6fa4d7ed Fix tzfile.c namespace (bug 17583).
tzfile.c is brought in by various ISO C functions, but calls fileno,
fread_unlocked and ftello, which are not ISO C functions.  This patch
adds names __fileno, __fread_unlocked and __ftello for those
functions, making tzfile.c use those new names.

Note: there are various uses of fileno elsewhere in glibc that I
didn't change, although it may turn out that some of those also need
to use __fileno.

Tested for x86_64 with the glibc testsuite.  Changed line numbers in
tzfile.c cause changes in assertions, and for some reason this ends up
with different instruction choice and register allocation, affecting
the size of __tzfile_read and so making comparison of disassembly for
libc.so problematic.

	[BZ #17583]
	* libio/fileno.c (fileno): Rename to __fileno and define as weak
	alias of __fileno.  Use libc_hidden_weak.
	(__fileno): Use libc_hidden_def.
	[weak_alias] (fileno_unlocked): Define as weak alias of __fileno.
	* libio/ftello.c (ftello): Rename to __ftello and define as weak
	alias of __ftello.
	[__OFF_T_MATCHES_OFF64_T] (ftello64): Define as weak alias of
	__ftello.
	* libio/iofread.c [weak_alias && !_IO_MTSAFE_IO]
	(__fread_unlocked): Define as strong alias of _IO_fread.  Use
	libc_hidden_def.
	(fread_unlocked): Don't use libc_hidden_ver.
	* libio/iofread_u.c (fread_unlocked): Rename to __fread_unlocked
	and define as weak alias of __fread_unlocked.  Don't use
	libc_hidden_def.
	(__fread_unlocked): Use libc_hidden_def.
	* include/stdio.h (__fileno): Declare.  Use libc_hidden_proto.
	(ftello): Don't use libc_hidden_proto.
	(__ftello): Declare.  Use libc_hidden_proto.
	(fread_unlocked): Don't use libc_hidden_proto.
	(__fread_unlocked): Declare.  Use libc_hidden_proto.
	* time/tzfile.c (__tzfile_read): Use __fileno, __fread_unlocked
	and __ftello instead of fileno, fread_unlocked and ftello.
2014-11-12 16:22:51 +00:00
Arjun Shankar
29955b5d96 Modify several tests to use test-skeleton.c
This patch modifies several test cases to use test-skeleton.c.
It was generated by a bash script written for this purpose and
thus excludes several other tests which I deemed worth a visual
inspection before making the change.

I intend to follow up with individual patches to the tests
skipped by the script.

The script itself resides at http://git.io/WODAmg and should
reproduce this very patch when run against master.

ChangeLog:

2014-10-30  Arjun Shankar  <arjun.is@lostca.se>

	* catgets/test-gencat.c: Use test-skeleton.c.
	* catgets/tst-catgets.c: Likewise.
	* csu/tst-empty.c: Likewise.
	* elf/tst-audit2.c: Likewise.
	* elf/tst-global1.c: Likewise.
	* elf/tst-pathopt.c: Likewise.
	* elf/tst-piemod1.c: Likewise.
	* elf/tst-tls10.c: Likewise.
	* elf/tst-tls11.c: Likewise.
	* elf/tst-tls12.c: Likewise.
	* gnulib/tst-gcc.c: Likewise.
	* iconvdata/tst-e2big.c: Likewise.
	* iconvdata/tst-loading.c: Likewise.
	* iconv/tst-iconv1.c: Likewise.
	* iconv/tst-iconv2.c: Likewise.
	* inet/test-inet6_opt.c: Likewise.
	* inet/tst-gethnm.c: Likewise.
	* inet/tst-network.c: Likewise.
	* inet/tst-ntoa.c: Likewise.
	* intl/tst-codeset.c: Likewise.
	* intl/tst-gettext2.c: Likewise.
	* intl/tst-gettext3.c: Likewise.
	* intl/tst-ngettext.c: Likewise.
	* intl/tst-translit.c: Likewise.
	* io/test-stat.c: Likewise.
	* libio/test-fmemopen.c: Likewise.
	* libio/tst-freopen.c: Likewise.
	* libio/tst-sscanf.c: Likewise.
	* libio/tst-ungetwc1.c: Likewise.
	* libio/tst-ungetwc2.c: Likewise.
	* libio/tst-widetext.c: Likewise.
	* localedata/tst-ctype.c: Likewise.
	* localedata/tst-digits.c: Likewise.
	* localedata/tst-leaks.c: Likewise.
	* localedata/tst-mbswcs1.c: Likewise.
	* localedata/tst-mbswcs2.c: Likewise.
	* localedata/tst-mbswcs3.c: Likewise.
	* localedata/tst-mbswcs4.c: Likewise.
	* localedata/tst-mbswcs5.c: Likewise.
	* localedata/tst-setlocale.c: Likewise.
	* localedata/tst-trans.c: Likewise.
	* localedata/tst-wctype.c: Likewise.
	* localedata/tst-xlocale1.c: Likewise.
	* login/tst-grantpt.c: Likewise.
	* malloc/tst-calloc.c: Likewise.
	* malloc/tst-malloc.c: Likewise.
	* malloc/tst-mallocstate.c: Likewise.
	* malloc/tst-mcheck.c: Likewise.
	* malloc/tst-mtrace.c: Likewise.
	* malloc/tst-obstack.c: Likewise.
	* math/atest-exp2.c: Likewise.
	* math/atest-exp.c: Likewise.
	* math/atest-sincos.c: Likewise.
	* math/test-matherr.c: Likewise.
	* math/test-misc.c: Likewise.
	* math/test-powl.c: Likewise.
	* math/tst-definitions.c: Likewise.
	* misc/tst-dirname.c: Likewise.
	* misc/tst-efgcvt.c: Likewise.
	* misc/tst-fdset.c: Likewise.
	* misc/tst-hsearch.c: Likewise.
	* misc/tst-mntent2.c: Likewise.
	* nptl/tst-sem7.c: Likewise.
	* nptl/tst-sem8.c: Likewise.
	* nptl/tst-sem9.c: Likewise.
	* nss/test-netdb.c: Likewise.
	* posix/tst-fnmatch.c: Likewise.
	* posix/tst-getlogin.c: Likewise.
	* posix/tst-gnuglob.c: Likewise.
	* posix/tst-mmap.c: Likewise.
	* pwd/tst-getpw.c: Likewise.
	* resolv/tst-inet_ntop.c: Likewise.
	* rt/tst-timer.c: Likewise.
	* stdio-common/test-fseek.c: Likewise.
	* stdio-common/test-popen.c: Likewise.
	* stdio-common/test-vfprintf.c: Likewise.
	* stdio-common/tst-cookie.c: Likewise.
	* stdio-common/tst-fileno.c: Likewise.
	* stdio-common/tst-gets.c: Likewise.
	* stdio-common/tst-obprintf.c: Likewise.
	* stdio-common/tst-perror.c: Likewise.
	* stdio-common/tst-sprintf2.c: Likewise.
	* stdio-common/tst-sprintf3.c: Likewise.
	* stdio-common/tst-sprintf.c: Likewise.
	* stdio-common/tst-swprintf.c: Likewise.
	* stdio-common/tst-tmpnam.c: Likewise.
	* stdio-common/tst-unbputc.c: Likewise.
	* stdio-common/tst-wc-printf.c: Likewise.
	* stdlib/tst-environ.c: Likewise.
	* stdlib/tst-fmtmsg.c: Likewise.
	* stdlib/tst-limits.c: Likewise.
	* stdlib/tst-rand48-2.c: Likewise.
	* stdlib/tst-rand48.c: Likewise.
	* stdlib/tst-random2.c: Likewise.
	* stdlib/tst-random.c: Likewise.
	* stdlib/tst-strtol.c: Likewise.
	* stdlib/tst-strtoll.c: Likewise.
	* stdlib/tst-tls-atexit.c: Likewise.
	* stdlib/tst-xpg-basename.c: Likewise.
	* string/test-ffs.c: Likewise.
	* string/tst-bswap.c: Likewise.
	* string/tst-inlcall.c: Likewise.
	* string/tst-strtok.c: Likewise.
	* string/tst-strxfrm.c: Likewise.
	* sysdeps/x86_64/tst-audit10.c: Likewise.
	* sysdeps/x86_64/tst-audit3.c: Likewise.
	* sysdeps/x86_64/tst-audit4.c: Likewise.
	* sysdeps/x86_64/tst-audit5.c: Likewise.
	* time/tst-ftime_l.c: Likewise.
	* time/tst-getdate.c: Likewise.
	* time/tst-mktime3.c: Likewise.
	* time/tst-mktime.c: Likewise.
	* time/tst-posixtz.c: Likewise.
	* time/tst-strptime2.c: Likewise.
	* time/tst-strptime3.c: Likewise.
	* wcsmbs/tst-btowc.c: Likewise.
	* wcsmbs/tst-mbrtowc.c: Likewise.
	* wcsmbs/tst-mbsrtowcs.c: Likewise.
	* wcsmbs/tst-wchar-h.c: Likewise.
	* wcsmbs/tst-wcpncpy.c: Likewise.
	* wcsmbs/tst-wcrtomb.c: Likewise.
	* wcsmbs/tst-wcsnlen.c: Likewise.
	* wcsmbs/tst-wcstof.c: Likewise.
2014-11-05 15:24:08 +05:30
Andreas Schwab
04b76b5aa8 Don't error out writing a multibyte character to an unbuffered stream (bug 17522) 2014-11-03 09:58:24 +01:00
Siddhesh Poyarekar
545583d664 Fix memory leak in error path of do_ftell_wide (BZ #17370) 2014-09-16 14:20:45 +05:30
Siddhesh Poyarekar
884ddc5081 Revert to defining __extern_inline only for gcc-4.3+ (BZ #17266)
The check for only __GNUC_STDC_INLINE__ and __GNUC_GNU_INLINE__ may
not be sufficient since those flags were added during initial support
for C99 inlining semantics.  There is also a problem with always
defining __extern_inline and __extern_always_inline, since it enables
inline wrapper functions even when GNU inlining semantics are not
guaranteed.  This, along with the possibility of such wrappers using
redirection (btowc for example) could result in compiler generating an
infinitely recusrive call to the function.

In fact it was such a recursion that led to this code being written
the way it was; see:

https://bugzilla.redhat.com/show_bug.cgi?id=186410

The initial change was to fix bugs 14530 and 13741, but they can be
resolved by checking if __fortify_function and/or
__extern_always_inline are defined, as it has been done in this patch.
In addition, I have audited uses of __extern_always_inline to make
sure that none of the uses result in compilation errors.

There is however a regression in this patch for llvm, since it reverts
the llvm expectation that __GNUC_STDC_INLINE__ or __GNUC_GNU_INLINE__
definition imply proper extern inline semantics.

2014-09-16  Siddhesh Poyarekar  <siddhesh@redhat.com>
	    Jakub Jelinek  <jakub@redhat.com>

	[BZ #17266]
	* libio/stdio.h: Check definition of __fortify_function
	instead of __extern_always_inline to include bits/stdio2.h.
	* math/bits/math-finite.h [__USE_XOPEN || __USE_ISOC99]: Also
	check if __extern_always_inline is defined.
	[__USE_MISC || __USE_XOPEN]: Likewise.
	[__USE_ISOC99] Likewise.
	* misc/sys/cdefs.h (__fortify_function): Define only if
	__extern_always_inline is defined.
	[!__cplusplus || __GNUC_PREREQ (4,3)]: Revert to defining
	__extern_always_inline and __extern_inline only for g++-4.3
	and newer or a compatible gcc.
2014-09-16 14:08:48 +05:30
Florian Weimer
ba7b4d294b Complete the removal of __gconv_translit_find
Prior to the 2.20 release, the function was just changed to fail
unconditionally, in commit a1a6a401ab.
This commit removes the function completely, including gconv bits
which depend on it.

This changes the gconv ABI, which is not a public interface.
2014-09-12 09:17:32 +02:00
Tim Lammens
984c0ea97f Fix memory leak in libio/wfileops.c do_ftell_wide [BZ #17370] 2014-09-11 10:44:02 +05:30
Joseph Myers
686554bff6 Remove redundant C locale settings.
Various glibc build / install / test code has C locale settings that
are redundant with LC_ALL=C.

LC_ALL takes precedence over LANG, so anywhere that sets LC_ALL=C
(explicitly, or through it being in the default environment for
running tests) does not need to set LANG=C.  LC_ALL=C also takes
precedence over LANGUAGE, since

2001-01-02  Ulrich Drepper  <drepper@redhat.com>

	* intl/dcigettext.c (guess_category_value): Rewrite so that LANGUAGE
	value is ignored if the selected locale is the C locale.
	* intl/tst-gettext.c: Set locale for above change.
	* intl/tst-translit.c: Likewise.

and so settings of LANGUAGE=C are also redundant when LC_ALL=C is
set.  One test also had LC_ALL=C in its -ENV setting, although it's
part of the default environment used for tests.

This patch removes the redundant settings.  It removes a suggestion in
install.texi of setting LANGUAGE=C LC_ALL=C for "make install"; the
Makefile.in target "install" already sets LC_ALL_C so there's no need
for the user to set it (and nor should there be any need for the user
to set it).

If some build machine tool used by "make install" uses a version of
libintl predating that 2001 change, and the user has LANGUAGE set, the
removal of LANGUAGE=C from the Makefile.in "install" rule could in
principle affect the user's installation.  However, I don't think we
need to be concerned about pre-2001 build tools.

Tested x86_64.

	* Makefile (install): Don't set LANGUAGE.
	* Makefile.in (install): Likewise.
	* assert/Makefile (test-assert-ENV): Remove variable.
	(test-assert-perr-ENV): Likewise.
	* elf/Makefile (neededtest4-ENV): Likewise.
	* iconvdata/Makefile ($(inst_gconvdir)/gconv-modules)
	[$(cross-compiling) = no]: Don't set LANGUAGE.
	* io/ftwtest-sh (LANG): Remove variable.
	* libio/Makefile (tst-widetext-ENV): Likewise.
	* manual/install.texi (Running make install): Don't refer to
	environment settings for make install.
	* INSTALL: Regenerated.
	* nptl/tst-tls6.sh: Don't set LANG.
	* posix/globtest.sh (LANG): Remove variable.
	* string/Makefile (tester-ENV): Likewise.
	(inl-tester-ENV): Likewise.
	(noinl-tester-ENV): Likewise.
	* sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules)
	[$(cross-compiling) = no]: Don't set LANGUAGE.
	* timezone/Makefile (build-testdata): Use $(built-program-cmd)
	without explicit environment settings.

localedata/ChangeLog:
	* tst-fmon.sh: Don't set LANGUAGE.
	* tst-locale.sh: Likewise.
2014-06-07 19:58:36 +00:00
Joseph Myers
2bf1804182 Include LOCPATH in default test environment.
Tests run using the default $(make-test-out) automatically get
GCONV_PATH and LC_ALL set, whether or not those environment variables
are actually needed for the individual test.  However, they do not get
LOCPATH set, meaning that a large number of tests have -ENV settings
just to set LOCPATH.

This patch moves LOCPATH into the default environment used for all
tests, on the principle that like GCONV_PATH any settings needed to
use files associated with the newly built library, rather than any old
installed files, are appropriate to use by default.

A further motivation is that various tests using .sh files also set
some combination of LC_ALL, GCONV_PATH and LOCPATH.  Preferably .sh
files should also use the default environment with any additions
required for the individual test.  Now, it was suggested in
<https://sourceware.org/ml/libc-alpha/2014-05/msg00715.html> that
various Makefile variables used in testing should be derived by
composing the -before-env and -after-env variables used when explicit
environment settings are required.  With such a change, it's also
natural for those variables to include the default settings (via some
intermediate makefile variable also used in make-test-out).

Because some .sh files only set variables that correspond to the
default settings, or a subset thereof, and this applies to more of the
.sh files once LOCPATH is in the default settings, doing so reduces
the size of a revised version of
<https://sourceware.org/ml/libc-alpha/2014-05/msg00596.html>: scripts
only needing the (expanded) default settings will not need to receive
the separate -before-env and -after-env variables, only the single
variable they do at present.  So moving LOCPATH into the default
settings can reduce churn caused by subsequent patches.

Tested x86_64 and x86.

	* Rules (make-test-out): Include
	LOCPATH=$(common-objpfx)localedata in default environment.
	* debug/Makefile (tst-chk1-ENV): Remove variable.
	(tst-chk2-ENV): Likewise.
	(tst-chk3-ENV): Likewise.
	(tst-chk4-ENV): Likewise.
	(tst-chk5-ENV): Likewise.
	(tst-chk6-ENV): Likewise.
	(tst-lfschk1-ENV): Likewise.
	(tst-lfschk2-ENV): Likewise.
	(tst-lfschk3-ENV): Likewise.
	(tst-lfschk4-ENV): Likewise.
	(tst-lfschk5-ENV): Likewise.
	(tst-lfschk6-ENV): Likewise.
	* iconvdata/Makefile (bug-iconv6-ENV): Likewise.
	(tst-iconv7-ENV): Likewise.
	* intl/Makefile (LOCPATH-ENV): Likewise.
	(tst-codeset-ENV): Likewise.
	(tst-gettext3-ENV): Likewise.
	(tst-gettext5-ENV): Likewise.
	* libio/Makefile (tst-widetext-ENV): Don't set LOCPATH.
	(tst-fopenloc-ENV): Likewise.
	(tst-fgetws-ENV): Remove variable.
	(tst-ungetwc1-ENV): Likewise.
	(tst-ungetwc2-ENV): Likewise.
	(bug-ungetwc2-ENV): Likewise.
	(tst-swscanf-ENV): Likewise.
	(bug-ftell-ENV): Likewise.
	(tst-fgetwc-ENV): Likewise.
	(tst-fseek-ENV): Likewise.
	(tst-ftell-partial-wide-ENV): Likewise.
	(tst-ftell-active-handler-ENV): Likewise.
	(tst-ftell-append-ENV): Likewise.
	* posix/Makefile (tst-fnmatch-ENV): Likewise.
	(tst-regexloc-ENV): Likewise.
	(bug-regex1-ENV): Likewise.
	(tst-regex-ENV): Likewise.
	(tst-regex2-ENV): Likewise.
	(bug-regex5-ENV): Likewise.
	(bug-regex6-ENV): Likewise.
	(bug-regex17-ENV): Likewise.
	(bug-regex18-ENV): Likewise.
	(bug-regex19-ENV): Likewise.
	(bug-regex20-ENV): Likewise.
	(bug-regex22-ENV): Likewise.
	(bug-regex23-ENV): Likewise.
	(bug-regex25-ENV): Likewise.
	(bug-regex26-ENV): Likewise.
	(bug-regex30-ENV): Likewise.
	(bug-regex32-ENV): Likewise.
	(bug-regex33-ENV): Likewise.
	(bug-regex34-ENV): Likewise.
	(bug-regex35-ENV): Likewise.
	(tst-rxspencer-ENV): Likewise.
	(tst-rxspencer-no-utf8-ENV): Likewise.
	* stdio-common/Makefile (tst-sprintf-ENV): Likewise.
	(tst-sscanf-ENV): Likewise.
	(tst-swprintf-ENV): Likewise.
	(tst-swscanf-ENV): Likewise.
	(test-vfprintf-ENV): Likewise.
	(scanf13-ENV): Likewise.
	(bug14-ENV): Likewise.
	(tst-grouping-ENV): Likewise.
	* stdlib/Makefile (tst-strtod-ENV): Likewise.
	(tst-strtod3-ENV): Likewise.
	(tst-strtod4-ENV): Likewise.
	(tst-strtod5-ENV): Likewise.
	(testmb2-ENV): Likewise./
	* string/Makefile (tst-strxfrm-ENV): Likewise.
	(tst-strxfrm2-ENV): Likewise.
	(bug-strcoll1-ENV): Likewise.
	(test-strcasecmp-ENV): Likewise.
	(test-strncasecmp-ENV): Likewise.
	* time/Makefile (tst-strptime-ENV): Likewise.
	(tst-ftime_l-ENV): Likewise.
	* wcsmbs/Makefile (tst-btowc-ENV): Likewise.
	(tst-mbrtowc-ENV): Likewise.
	(tst-wcrtomb-ENV): Likewise.
	(tst-mbrtowc2-ENV): Likewise.
	(tst-c16c32-1-ENV): Likewise.
	(tst-mbsnrtowcs-ENV): Likewise.

localedata/ChangeLog:
	* Makefile (TEST_MBWC_ENV): Remove variable.
	(tst_iswalnum-ENV): Likewise.
	(tst_iswalpha-ENV): Likewise.
	(tst_iswcntrl-ENV): Likewise.
	(tst_iswctype-ENV): Likewise.
	(tst_iswdigit-ENV): Likewise.
	(tst_iswgraph-ENV): Likewise.
	(tst_iswlower-ENV): Likewise.
	(tst_iswprint-ENV): Likewise.
	(tst_iswpunct-ENV): Likewise.
	(tst_iswspace-ENV): Likewise.
	(tst_iswupper-ENV): Likewise.
	(tst_iswxdigit-ENV): Likewise.
	(tst_mblen-ENV): Likewise.
	(tst_mbrlen-ENV): Likewise.
	(tst_mbrtowc-ENV): Likewise.
	(tst_mbsrtowcs-ENV): Likewise.
	(tst_mbstowcs-ENV): Likewise.
	(tst_mbtowc-ENV): Likewise.
	(tst_strcoll-ENV): Likewise.
	(tst_strfmon-ENV): Likewise.
	(tst_strxfrm-ENV): Likewise.
	(tst_swscanf-ENV): Likewise.
	(tst_towctrans-ENV): Likewise.
	(tst_towlower-ENV): Likewise.
	(tst_towupper-ENV): Likewise.
	(tst_wcrtomb-ENV): Likewise.
	(tst_wcscat-ENV): Likewise.
	(tst_wcschr-ENV): Likewise.
	(tst_wcscmp-ENV): Likewise.
	(tst_wcscoll-ENV): Likewise.
	(tst_wcscpy-ENV): Likewise.
	(tst_wcscspn-ENV): Likewise.
	(tst_wcslen-ENV): Likewise.
	(tst_wcsncat-ENV): Likewise.
	(tst_wcsncmp-ENV): Likewise.
	(tst_wcsncpy-ENV): Likewise.
	(tst_wcspbrk-ENV): Likewise.
	(tst_wcsrtombs-ENV): Likewise.
	(tst_wcsspn-ENV): Likewise.
	(tst_wcsstr-ENV): Likewise.
	(tst_wcstod-ENV): Likewise.
	(tst_wcstok-ENV): Likewise.
	(tst_wcstombs-ENV): Likewise.
	(tst_wcswidth-ENV): Likewise.
	(tst_wcsxfrm-ENV): Likewise.
	(tst_wctob-ENV): Likewise.
	(tst_wctomb-ENV): Likewise.
	(tst_wctrans-ENV): Likewise.
	(tst_wctype-ENV): Likewise.
	(tst_wcwidth-ENV): Likewise.
	(tst-digits-ENV): Likewise.
	(tst-mbswcs6-ENV): Likewise.
	(tst-xlocale1-ENV): Likewise.
	(tst-xlocale2-ENV): Likewise.
	(tst-strfmon1-ENV): Likewise.
	(tst-strptime-ENV): Likewise.
	(tst-setlocale-ENV): Don't set LOCPATH.
	(bug-iconv-trans-ENV): Remove variable.
	(tst-sscanf-ENV): Likewise.
	(tst-leaks-ENV): Don't set LOCPATH.
	(bug-setlocale1-ENV): Remove variable.
	(bug-setlocale1-static-ENV): Likewise.
	(tst-setlocale2-ENV): Likewise.
2014-06-04 23:37:25 +00:00
Siddhesh Poyarekar
2482ae433a Fix offset computation for append+ mode on switching from read (BZ #16724)
The offset computation in write mode uses the fact that _IO_read_end
is kept in sync with the external file offset.  This however is not
true when O_APPEND is in effect since switching to write mode ought to
send the external file offset to the end of file without making the
necessary adjustment to _IO_read_end.

Hence in append mode, offset computation when writing should only
consider the effect of unflushed writes, i.e. from _IO_write_base to
_IO_write_ptr.

The wiki has a detailed document that describes the rationale for
offsets returned by ftell in various conditions:

https://sourceware.org/glibc/wiki/File%20offsets%20in%20a%20stdio%20stream%20and%20ftell
2014-05-27 13:54:19 +05:30
Roland McGrath
8f2f08d04f Fix -Wundef warnings for _IO_JUMPS_OFFSET. 2014-05-01 13:33:13 -07:00
Andreas Schwab
003e49ed5d Setup LOCPATH for tst-ftell-active-handler and tst-ftell-partial-wide in libio 2014-03-25 12:43:30 +01:00
Will Newton
c15cf13a8a Revert "Fix _IO_JUMPS_OFFSET -Wundef warnings"
This reverts commit f7efd7c3df.
2014-03-17 20:37:42 +00:00
Will Newton
f7efd7c3df Fix _IO_JUMPS_OFFSET -Wundef warnings
ChangeLog:

2014-03-17  Will Newton  <will.newton@linaro.org>

	* libio/genops.c: Check whether
	_IO_JUMPS_OFFSET is defined with #ifdef rather
	than #if.
	* libio/libioP.h: Likewise.
	* stdio-common/vfprintf.c: Likewise.
2014-03-17 16:05:23 +00:00
Siddhesh Poyarekar
ae42bbc55a Change offset in fdopen only if setting O_APPEND
fdopen should only be allowed to change the offset in the file it
attaches to if it is setting O_APPEND.  If O_APPEND is already set, it
should not change the state of the handle.
2014-03-17 21:24:02 +05:30
Siddhesh Poyarekar
ea33158c96 Fix offset caching for streams and use it for ftell (BZ #16680)
The ftell implementation was made conservative to ensure that
incorrectly cached offsets never affect it.  However, this causes
problems for append mode when a file stream is rewound.  Additionally,
the 'clever' trick of using stat to get position for append mode files
caused more problems than it solved and broke old behavior.  I have
described the various problems that it caused and then finally the
solution.

For a and a+ mode files, rewinding the stream should result in ftell
returning 0 as the offset, but the stat() trick caused it to
(incorrectly) always return the end of file.  Now I couldn't find
anything in POSIX that specifies the stream position after rewind()
for a file opened in 'a' mode, but for 'a+' mode it should be set to
0.  For 'a' mode too, it probably makes sense to keep it set to 0 in
the interest of retaining old behavior.

The initial file position for append mode files is implementation
defined, so the implementation could either retain the current file
position or move the position to the end of file.  The earlier ftell
implementation would move the offset to end of file for append-only
mode, but retain the old offset for a+ mode.  It would also cache the
offset (this detail is important).  My patch broke this and would set
the initial position to end of file for both append modes, thus
breaking old behavior.  I was ignorant enough to write an incorrect
test case for it too.

The Change:

I have now brought back the behavior of seeking to end of file for
append-only streams, but with a slight difference.  I don't cache the
offset though, since we would want ftell to query the current file
position through lseek while the stream is not active.  Since the
offset is moved to the end of file, we can rely on the file position
reported by lseek and we don't need to resort to the stat() nonsense.

Finally, the cache is always reliable, except when there are unflished
writes in an append mode stream (i.e. both a and a+).  In the latter
case, it is safe to just do an lseek to SEEK_END.  The value can be
safely cached too, since the file handle is already active at this
point.  Incidentally, this is the only state change we affect in the
file handle (apart from taking locks of course).

I have also updated the test case to correct my impression of the
initial file position for a+ streams to the initial behavior.  I have
verified that this does not break any existing tests in the testsuite
and also passes with the new tests.
2014-03-17 21:23:56 +05:30
Siddhesh Poyarekar
b1dbb426e1 Fix up return codes for tests in tst-ftell-active-handler
The test functions used a variable ret to store failure codes for
individual tests, but the variable was incorrectly used to record
other failure codes too, resulting in overwriting of the tests status.
This is now fixed by making sure that the ret variable is used only
for recording test failures.

	* libio/tst-ftell-active-handler.c (do_ftell_test): Don't mix
	up test status with function return status.
	(do_write_test): Likewise.
	(do_append_test): Likewise.
2014-03-17 19:44:51 +05:30
Joseph Myers
f214606a0e Enumerate tests with special rules in tests-special variable.
This patch is a revised and updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>.

In order to generate overall summaries of the results of all tests in
the glibc testsuite, we need to identify and concatenate the files
with the results of individual tests.

Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this.
However, the normal glibc approach is explicit enumeration of the
expected set of files with a given property, rather than all files
matching some pattern like that.  Furthermore, we would like to be
able to mark tests as UNRESOLVED if the file with their results is for
some reason missing, and in future we would like to be able to mark
tests as UNSUPPORTED if they are disabled for a particular
configuration (rather than simply having them missing from the list of
tests as at present).  Such handling of tests that were not run or did
not record results requires an explicit enumeration of tests.

For the tests following the default makefile rules, $(tests) (and
$(xtests)) provides such an enumeration.  Others, however, are added
directly as dependencies of the "tests" and "xtests" makefile
targets.  This patch changes the makefiles to put them in variables
tests-special and xtests-special, with appropriate dependencies on the
tests listed there then being added centrally.

Those variables are used in Rules and so need to be set before Rules
is included in a subdirectory makefile, which is often earlier in the
makefile than the dependencies were present before.  We previously
discussed the question of where to include Rules; see the question at
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a
discussion in
<https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why
Rules is included early rather than late in subdirectory makefiles.

It was necessary to avoid an indirection through the check-abi target
and get the check-abi-* targets for individual libraries into the
tests-special variable.  The intl/ test $(objpfx)tst-gettext.out,
previously built only because of dependencies from other tests, was
also added to tests-special for the same reason.

The entries in tests-special are the full makefile targets, complete
with $(objpfx) and .out.  If a future change causes tests to be named
consistently with a .out suffix, this can be changed to include just
the path relative to $(objpfx), without .out.

Tested x86_64, including that the same set of files is generated in
the build directory by a build and testsuite run both before and after
the patch (except for changes to the
elf/tst-null-argv.debug.out.<number> file name), and a build with
run-built-tests=no to verify there aren't any more obvious instances
of the issue Marcus Shawcroft reported with a previous version in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>.

	* Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	(tests): Depend on $(tests-special).
	* Makerules (check-abi-list): New variable.
	(check-abi): Depend on $(check-abi-list).
	[$(subdir) = elf] (tests-special): Add
	$(objpfx)check-abi-libc.out.
	[$(build-shared) = yes && subdir] (tests-special): Add
	$(check-abi-list).
	[$(build-shared) = yes && subdir] (tests): Do not depend on
	check-abi.
	* Rules (tests): Depend on $(tests-special).
	(xtests): Depend on $(xtests-special).
	* catgets/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* conform/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* elf/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* grp/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* iconv/Makefile (xtests): Change dependencies to ....
	(xtests-special): ... additions to this variable.
	* iconvdata/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* intl/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.  Also add
	$(objpfx)tst-gettext.out.
	* io/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* libio/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* malloc/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* misc/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* nptl/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* nptl_db/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* posix/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	(xtests): Change dependencies to ....
	(xtests-special): ... additions to this variable.
	* resolv/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	(xtests): Change dependencies to ....
	(xtests-special): ... additions to this variable.
	* stdio-common/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	(do-tst-unbputc): Remove target.
	(do-tst-printf): Likewise.
	* stdlib/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* string/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
	* sysdeps/x86/Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.

localedata:
	* Makefile (tests): Change dependencies to ....
	(tests-special): ... additions to this variable.
2014-03-06 22:35:33 +00:00
Siddhesh Poyarekar
d4b17258bb Fix up formatting in tst-ftell-active-handler.c 2014-03-04 15:49:58 +05:30
Siddhesh Poyarekar
091eff71a5 Fix up formatting 2014-03-04 12:27:34 +05:30
Siddhesh Poyarekar
fa3cd24827 Use cached offset in ftell when reliable
The cached offset is reliable to use in ftell when the stream handle
is active.  We can consider a stream as being active when there is
unflushed data.  However, even in this case, we can use the cached
offset only when the stream is not being written to in a+ mode,
because this case may have unflushed data and a stale offset; the
previous read could have sent it off somewhere other than the end of
the file.

There were a couple of adjustments necessary to get this to work.
Firstly, fdopen now ceases to use _IO_attach_fd because it sets the
offset cache to the current file position.  This is not correct
because there could be changes to the file descriptor before the
stream handle is activated, which would not get reflected.

A similar offset caching action is done in _IO_fwide, claiming that
wide streams have 'problems' with the file offsets.  There don't seem
to be any obvious problems with not having the offset cache available,
other than that it will have to be queried in a subsequent
read/write/seek.  I have removed this as well.

The testsuite passes successfully with these changes on x86_64.
2014-03-04 12:23:28 +05:30
Siddhesh Poyarekar
000232b9bc Separate ftell from fseek logic and avoid modifying FILE data (#16532)
ftell semantics are distinct from fseek(SEEK_CUR) especially when it
is called on a file handler that is not yet active.  Due to this
caveat, much care needs to be taken while modifying the handler data
and hence, this first iteration on separating out ftell focusses on
maintaining handler data integrity at all times while it figures out
the current stream offset.  The result is that it makes a syscall for
every offset request.

There is scope for optimizing this by caching offsets when we know
that the handler is active.  A simple way to find out is when the
buffers have data.  It is not so simple to find this out when the
buffer is empty without adding some kind of flag.
2014-03-04 07:45:58 +05:30
Roland McGrath
f08e9a2629 Fix fallout from Joseph's untested Makeconfig change. 2014-02-28 13:00:27 -08:00
Joseph Myers
a5f891ac8d Consistently include Makeconfig after defining subdir.
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information.  No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.

This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules).  Includes are added if needed, or moved up if already
present.  Subdirectory "all:" targets are removed, since Makeconfig
provides one.

There is potential for further cleanups I haven't done.  Rules and
Makerules have code such as

ifneq   "$(findstring env,$(origin headers))" ""
headers :=
endif

to override to empty any value of various variables that came from the
environment.  I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable.  (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.)  Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves.  The special code to override values coming
from the environment would then be obsolete and could be removed.

Tested x86_64, including that installed binaries are identical before
and after the patch.

	* argp/Makefile: Include Makeconfig immediately after defining
	subdir.
	* assert/Makefile: Likewise.
	* benchtests/Makefile: Likewise.
	* catgets/Makefile: Likewise.
	* conform/Makefile: Likewise.
	* crypt/Makefile: Likewise.
	* csu/Makefile: Likewise.
	(all): Remove target.
	* ctype/Makefile: Include Makeconfig immediately after defining
	subdir.
	* debug/Makefile: Likewise.
	* dirent/Makefile: Likewise.
	* dlfcn/Makefile: Likewise.
	* gmon/Makefile: Likewise.
	* gnulib/Makefile: Likewise.
	* grp/Makefile: Likewise.
	* gshadow/Makefile: Likewise.
	* hesiod/Makefile: Likewise.
	* hurd/Makefile: Likewise.
	(all): Remove target.
	* iconvdata/Makefile: Include Makeconfig immediately after
	defining subdir.
	* inet/Makefile: Likewise.
	* intl/Makefile: Likewise.
	* io/Makefile: Likewise.
	* libio/Makefile: Likewise.
	(all): Remove target.
	* locale/Makefile: Include Makeconfig immediately after defining
	subdir.
	* login/Makefile: Likewise.
	* mach/Makefile: Likewise.
	(all): Remove target.
	* malloc/Makefile: Include Makeconfig immediately after defining
	subdir.
	(all): Remove target.
	* manual/Makefile: Include Makeconfig immediately after defining
	subdir.
	* math/Makefile: Likewise.
	* misc/Makefile: Likewise.
	* nis/Makefile: Likewise.
	* nss/Makefile: Likewise.
	* po/Makefile: Likewise.
	(all): Remove target.
	* posix/Makefile: Include Makeconfig immediately after defining
	subdir.
	* pwd/Makefile: Likewise.
	* resolv/Makefile: Likewise.
	* resource/Makefile: Likewise.
	* rt/Makefile: Likewise.
	* setjmp/Makefile: Likewise.
	* shadow/Makefile: Likewise.
	* signal/Makefile: Likewise.
	* socket/Makefile: Likewise.
	* soft-fp/Makefile: Likewise.
	* stdio-common/Makefile: Likewise.
	* stdlib/Makefile: Likewise.
	* streams/Makefile: Likewise.
	* string/Makefile: Likewise.
	* sunrpc/Makefile: Likewise.
	(all): Remove target.
	* sysvipc/Makefile: Include Makeconfig immediately after defining
	subdir.
	* termios/Makefile: Likewise.
	* time/Makefile: Likewise.
	* timezone/Makefile: Likewise.
	(all): Remove target.
	* wcsmbs/Makefile: Include Makeconfig immediately after defining
	subdir.
	* wctype/Makefile: Likewise.

libidn/ChangeLog:
	* Makefile: Include Makeconfig immediately after defining subdir.

localedata/ChangeLog:
	* Makefile: Include Makeconfig immediately after defining subdir.
	(all): Remove target.

nptl/ChangeLog:
	* Makefile: Include Makeconfig immediately after defining subdir.

nptl_db/ChangeLog:
	* Makefile: Include Makeconfig immediately after defining subdir.
2014-02-26 23:12:03 +00:00
Joseph Myers
f0881698bf Generate .test-result files for tests with special rules.
This patch, an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now
proposed for inclusion in glibc, extends the generation of PASS and
FAIL status in .test-result files for individual tests to cover tests
with their own custom makefile rules.  This is just adding
$(evaluate-test) calls to all such rules, since tests with multiple
commands were previously split into separate tests.

Note that the tests the makefiles expect to fail (posix/annexc and
conformtest) currently get FAIL listed in the .test-result file,
rather than XFAIL; a subsequent patch will introduce a better XFAIL
mechanism.

Tested x86_64.

	* Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test).
	($(objpfx)check-local-headers.out): Likewise.
	($(objpfx)begin-end-check.out): Likewise.
	* Makerules (check-abi-%.out): Likewise.
	* catgets/Makefile ($(objpfx)test1.cat): Likewise.
	($(objpfx)test2.cat): Likewise.
	($(objpfx)de/libc.cat): Likewise.
	($(objpfx)test-gencat.out): Likewise.
	* conform/Makefile ($(objpfx)run-conformtest.out): Likewise.
	* elf/Makefile ($(objpfx)order-cmp.out): Likewise.
	($(objpfx)noload-mem): Likewise.
	($(objpfx)tst-pathopt.out): Likewise.
	($(objpfx)tst-rtld-load-self.out): Likewise.
	($(objpfx)tst-array1-cmp.out): Likewise.
	($(objpfx)tst-array1-static-cmp.out): Likewise.
	($(objpfx)tst-array2-cmp.out): Likewise.
	($(objpfx)tst-array3-cmp.out): Likewise.
	($(objpfx)tst-array4-cmp.out): Likewise.
	($(objpfx)tst-array5-cmp.out): Likewise.
	($(objpfx)tst-array5-static-cmp.out): Likewise.
	($(objpfx)check-textrel.out): Likewise.
	($(objpfx)check-execstack.out): Likewise.
	($(objpfx)check-localplt.out): Likewise.
	($(objpfx)order2-cmp.out): Likewise.
	($(objpfx)tst-leaks1-mem): Likewise.
	($(objpfx)tst-leaks1-static-mem): Likewise.
	($(objpfx)tst-initorder-cmp.out): Likewise.
	($(objpfx)tst-initorder2-cmp.out): Likewise.
	($(objpfx)tst-unused-dep.out): Likewise.
	($(objpfx)tst-unused-dep-cmp.out): Likewise.
	* grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise.
	* iconv/Makefile (test-iconvconfig): Likewise.
	* iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise.
	($(objpfx)iconv-test.out): Likewise.
	($(objpfx)tst-tables.out): Likewise.
	* intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise.
	($(objpfx)tst-gettext.out): Likewise.
	($(objpfx)tst-translit.out): Likewise.
	($(objpfx)tst-gettext2.out): Likewise.
	($(objpfx)tst-gettext4.out): Likewise.
	($(objpfx)tst-gettext6.out): Likewise.
	* io/Makefile ($(objpfx)ftwtest.out): Likewise.
	* libio/Makefile ($(objpfx)test-freopen.out): Likewise.
	($(objpfx)tst-fopenloc-cmp.out): Likewise.
	($(objpfx)tst-fopenloc-mem.out): Likewise.
	* malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise.
	* misc/Makefile ($(objpfx)tst-error1-mem): Likewise.
	* posix/Makefile ($(objpfx)globtest.out): Likewise.
	($(objpfx)wordexp-tst.out): Likewise.
	($(objpfx)annexc.out): Likewise.
	($(objpfx)tst-fnmatch-mem): Likewise.
	($(objpfx)bug-regex2-mem): Likewise.
	($(objpfx)bug-regex14-mem): Likewise.
	($(objpfx)bug-regex21-mem): Likewise.
	($(objpfx)bug-regex31-mem): Likewise.
	($(objpfx)tst-vfork3-mem): Likewise.
	($(objpfx)tst-rxspencer-no-utf8-mem): Likewise.
	($(objpfx)tst-pcre-mem): Likewise.
	($(objpfx)tst-boost-mem): Likewise.
	($(objpfx)tst-getconf.out): Likewise.
	($(objpfx)bug-ga2-mem): Likewise.
	($(objpfx)bug-glob2-mem): Likewise.
	* resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise.
	($(objpfx)mtrace-tst-leaks2): Likewise.
	* stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise.
	($(objpfx)tst-printf.out): Likewise.
	($(objpfx)tst-setvbuf1.out): Likewise.
	($(objpfx)tst-setvbuf1-cmp.out): Likewise.
	* stdlib/Makefile ($(objpfx)isomac.out): Likewise.
	($(objpfx)tst-fmtmsg.out): Likewise.
	* string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise.
	* sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise.

localedata:
	* Makefile ($(objpfx)sort-test.out): Use $(evaluate-test).
	($(objpfx)tst-fmon.out): Likewise.
	($(objpfx)tst-numeric.out): Likewise.
	($(objpfx)tst-locale.out): Likewise.
	($(objpfx)tst-rpmatch.out): Likewise.
	($(objpfx)tst-trans.out): Likewise.
	($(objpfx)tst-mbswcs.out): Likewise.
	($(objpfx)tst-ctype.out): Likewise.
	($(objpfx)tst-wctype.out): Likewise.
	($(objpfx)tst-langinfo.out): Likewise.
	($(objpfx)mtrace-tst-leaks): Likewise.

nptl:
	* Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test).
	($(objpfx)tst-tls6.out): Likewise.
	($(objpfx)tst-cleanup0.out): Likewise.
	($(objpfx)tst-cleanup0-cmp.out): Likewise.
	($(objpfx)tst-cancel-wrappers.out): Likewise.
	($(objpfx)tst-oddstacklimit.out): Likewise.

nptl_db:
	* Makefile ($(objpfx)db-symbols.out): Use
	$(evaluate-test).
2014-02-21 21:48:08 +00:00
Joseph Myers
acd7f096d7 Complete _BSD_SOURCE / _SVID_source followup cleanup.
This patch completes the headers cleanup consequent on removal of
_BSD_SOURCE and _SVID_SOURCE (apart from any subsequent deprecations):

* #endif conditionals that referred to BSD or SVID are updated.

* Redundant __USE_* tests in cases involving __USE_MISC are removed.
  This includes cases such as __USE_MISC || __USE_ISOC99, where
  __USE_MISC is redundant (because __USE_MISC is only ever defined in
  the default / _DEFAULT_SOURCE / _GNU_SOURCE case, when __USE_ISOC99
  is also defined; the same applies to the non-XSI-extended POSIX
  versions), and cases involving __USE_GNU, where __USE_GNU is
  redundant (because if __USE_GNU is defined, so are the other __USE_*
  macros).  There may well be other cases of __USE_FOO || __USE_BAR
  tests that could be simplified because one macro implies the other;
  this patch only addresses cases involving __USE_MISC.

Tested x86_64.

	* bits/fcntl.h [__USE_MISC]: Remove redundant conditionals.
	* bits/sigaction.h [__USE_MISC]: Likewise.
	* bits/waitstatus.h: Update #endif comments.
	* ctype/ctype.h: Likewise.
	* dirent/dirent.h: Likewise.
	[__USE_MISC]: Remove redundant conditionals.
	* grp/grp.h: Update #endif comments.
	[__USE_GNU]: Remove redundant conditionals.
	[__USE_MISC]: Likewise.
	* inet/netinet/in.h [__USE_GNU]: Likewise.
	* io/sys/stat.h [__USE_MISC]: Likewise.
	* libio/bits/stdio-ldbl.h [__USE_MISC]: Likewise.
	* libio/bits/stdio.h: Update #endif comments.
	[__USE_MISC]: Remove redundant conditionals.
	* libio/bits/stdio2.h [__USE_MISC]: Likewise.
	* libio/stdio.h: Update #endif comments.
	[__USE_MISC]: Remove redundant conditionals.
	* math/bits/math-finite.h [__USE_MISC]: Likewise.
	* math/bits/mathcalls.h [__USE_MISC]: Likewise.
	* math/math.h: Update #else and #endif comments.
	[__USE_MISC]: Remove redundant conditionals.
	* misc/sys/uio.h: Update #endif comments.
	* posix/bits/unistd.h [__USE_MISC]: Remove redundant conditionals.
	* posix/glob.h [__USE_MISC]: Likewise.
	* posix/sys/types.h: Update #endif comments.
	[__USE_MISC]: Remove redundant conditionals.
	* posix/sys/wait.h: Update #endif comments.
	[__USE_MISC]: Remove redundant conditionals.
	* posix/unistd.h: Update #endif comments.
	[__USE_MISC]: Remove redundant conditionals.
	* pwd/pwd.h [__USE_GNU]: Likewise.
	[__USE_MISC]: Likewise.
	* resolv/netdb.h [__USE_GNU]: Likewise.
	* signal/signal.h: Update #endif comments.
	[__USE_MISC]: Remove redundant conditionals.
	* stdlib/stdlib.h: Update #else and #endif comments.
	[__USE_MISC]: Remove redundant conditionals.
	[__USE_GNU]: Likewise.
	* string/bits/string2.h [__USE_MISC]: Likewise.
	* string/string.h: Update #endif comments.
	[__USE_MISC]: Remove redundant conditionals.
	* sysdeps/m68k/m680x0/fpu/bits/mathinline.h [__USE_MISC]:
	Likewise.
	* sysdeps/mach/hurd/bits/fcntl.h [__USE_MISC]: Likewise.
	* sysdeps/mach/hurd/bits/stat.h [__USE_MISC]: Likewise.
	* sysdeps/unix/sysv/linux/alpha/bits/sigaction.h [__USE_MISC]:
	Likewise.
	* sysdeps/unix/sysv/linux/alpha/bits/stat.h [__USE_MISC]:
	Likewise.
	* sysdeps/unix/sysv/linux/bits/fcntl-linux.h: Update #endif
	comments.
	[__USE_MISC]: Remove redundant conditionals.
	* sysdeps/unix/sysv/linux/bits/in.h [__USE_GNU]: Likewise.
	* sysdeps/unix/sysv/linux/bits/sigaction.h [__USE_MISC]: Likewise.
	* sysdeps/unix/sysv/linux/bits/socket.h [__USE_GNU]: Likewise.
	* sysdeps/unix/sysv/linux/bits/stat.h [__USE_MISC]: Likewise.
	* sysdeps/unix/sysv/linux/ia64/bits/sigaction.h [__USE_MISC]:
	Likewise.
	* sysdeps/unix/sysv/linux/m68k/bits/stat.h [__USE_MISC]: Likewise.
	* sysdeps/unix/sysv/linux/mips/bits/sigaction.h [__USE_MISC]:
	Likewise.
	* sysdeps/unix/sysv/linux/mips/bits/stat.h [__USE_MISC]: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/bits/stat.h [__USE_MISC]:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/bits/sigaction.h [__USE_MISC]:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/bits/stat.h [__USE_MISC]: Likewise.
	* sysdeps/unix/sysv/linux/sparc/bits/sigaction.h [__USE_MISC]:
	Likewise.
	* sysdeps/unix/sysv/linux/sparc/bits/stat.h [__USE_MISC]:
	Likewise.
	* sysdeps/unix/sysv/linux/x86/bits/stat.h [__USE_MISC]: Likewise.
	* sysdeps/x86/bits/string.h: Update #endif comments.
	* sysdeps/x86/fpu/bits/mathinline.h [__USE_MISC]: Remove redundant
	conditionals.
	* time/sys/time.h: Update #endif comments.
	* time/time.h: Likewise.
	[__USE_MISC]: Remove redundant conditionals.
2014-02-21 21:45:26 +00:00
Joseph Myers
7f98f1806a Split up rules for tests using mtrace and something else.
Most glibc tests that use mtrace to verify that there were no memory
leaks from the glibc facilities used in a given test depend on the
.out file of the previous test so that the mtrace test runs mtrace and
nothing else.

Two, however, have a single target combining mtrace with something
else.  In the case of libio/tst-fopenloc.check, the test both compares
the output with an expected baseline and runs mtrace.  In the case of
posix/tst-rxspencer-mem, the test is run (with different command line
from the main run) and then mtrace is run, from the same makefile
target.

This patch splits both of these tests up to use separate makefile
targets for each thing tested; in the tst-rxspencer case, a file
tst-rxspencer-no-utf8.c is created that just includes tst-rxspencer.c,
as is usual for tests where the same code gets tested in different
compile-time or runtime configurations.

Adding $(evaluate-test) to test commands, as in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html>, will no
longer need to insert && between multiple commands, as all tests will
either have just a single command or already use &&.

Tested x86_64.

	* libio/Makefile ($(objpfx)tst-fopenloc.check): Split into
	separate $(objpfx)tst-fopenloc-cmp.out and
	$(objpfx)tst-fopenloc-mem.out targets.
	(tests): Update dependencies.
	* posix/Makefile (tests variable): Add tst-rxspencer-no-utf8.
	(generated): Change tst-rxspencer-mem and tst-rxspencer.mtrace to
	tst-rxspencer-no-utf8-mem and tst-rxspencer-no-utf8.mtrace.
	(tst-rxspencer-no-utf8-ARGS): New variable.
	(tst-rxspencer-no-utf8-ENV): Likewise.
	(tests target): Depend on $(objpfx)tst-rxspencer-no-utf8-mem
	instead of $(objpfx)tst-rxspencer-mem.
	($(objpfx)tst-rxspencer-mem): Change target to
	$(objpfx)tst-rxspencer-no-utf8-mem.  Depend on
	$(objpfx)tst-rxspencer-no-utf8.out instead of running test program.
	* posix/tst-rxspencer-no-utf8.c: New file.
2014-02-14 13:45:14 +00:00
Joseph Myers
ed9a38e21b Clean up trivially redundant __USE_MISC conditionals.
This patch cleans up cases of __USE_MISC that are trivially redundant
after the recent substitution of __USE_MISC for __USE_BSD and
__USE_SVID: either in constructs such as "defined __USE_MISC ||
defined __USE_MISC", or else (in the bits/mman.h case) a conditional
on __USE_MISC nested inside another __USE_MISC conditional.  (The
cleanups remaining after this patch are still quite large, but it
seems a reasonable piece to separate out.)

Tested x86_64.

	* bits/mman.h [__USE_MISC]: Remove redundant conditionals.
	* ctype/ctype.h [__USE_MISC]: Likewise.
	* dirent/dirent.h [__USE_MISC]: Likewise.
	* grp/grp.h [__USE_MISC]: Likewise.
	* io/fcntl.h [__USE_MISC]: Likewise.
	* io/sys/stat.h [__USE_MISC]: Likewise.
	* libio/stdio.h [__USE_MISC]: Likewise.
	* posix/unistd.h [__USE_MISC]: Likewise.
	* pwd/pwd.h [__USE_MISC]: Likewise.
	* stdlib.h [__USE_MISC]: Likewise.
	* string/bits/string2.h [__USE_MISC]: Likewise.
	* string/string.h [__USE_MISC]: Likewise.
	* time/time.h [__USE_MISC]: Likewise.
2014-02-13 22:07:53 +00:00
Joseph Myers
498afc54df Combine __USE_BSD and __USE_SVID into __USE_MISC.
This patch cleans up following the obsoletion of _BSD_SOURCE and
_SVID_SOURCE by combining __USE_BSD and __USE_SVID into __USE_MISC.

The only non-mechanical part of this patch is the changes to
features.h; everything else is simple substitution of __USE_MISC for
the old macros.  Thus, this patch leaves obviously redundant
conditionals such as "defined __USE_MISC || defined __USE_MISC", and
does not update #endif comments where they referred to BSD or SVID in
words instead of the literal macro name.  This is intended to
facilitate patch review by separating the less mechanical changes from
these purely mechanical changes into a separate patch.  (I do intend
to integrate all the changes from
<https://sourceware.org/ml/libc-alpha/2013-12/msg00226.html>, which I
believe includes all the trailing comment updates, in subsequent
patches.)

Tested x86_64.

	* include/features.h (__USE_BSD): Remove macro definitions.
	(__USE_SVID): Likewise.
	(_BSD_SOURCE): Likewise.
	(_SVID_SOURCE): Likewise.
	[!defined _BSD_SOURCE && !defined _SVID_SOURCE]: Remove condition
	from definition of _DEFAULT_SOURCE.
	[_BSD_SOURCE || _SVID_SOURCE]: Change condition to
	[_DEFAULT_SOURCE].
	* bits/fcntl.h [__USE_BSD]: Change condition to [__USE_MISC].
	* bits/mman.h [__USE_BSD]: Likewise.
	* bits/termios.h [__USE_BSD]: Likewise.
	* bits/waitstatus.h [__USE_BSD]: Likewise.
	* ctype/ctype.h [__USE_SVID]: Likewise.
	* dirent/dirent.h [__USE_BSD]: Likewise.
	* grp/grp.h [__USE_SVID]: Likewise.
	[__USE_BSD]: Likewise.
	* inet/netinet/igmp.h [__USE_BSD]: Likewise.
	* io/fcntl.h [__USE_BSD]: Likewise.
	* io/ftw.h [__USE_BSD]: Likewise.
	* io/sys/stat.h [__USE_BSD]: Likewise.
	* libio/bits/stdio-ldbl.h [__USE_BSD]: Likewise.
	* libio/bits/stdio2.h [__USE_BSD]: Likewise.
	* libio/stdio.h [__USE_SVID]: Likewise.
	[__USE_BSD]: Likewise.
	* math/math.h [__USE_SVID]: Likewise.
	[__USE_BSD]: Likewise.
	* misc/bits/syslog-ldbl.h [__USE_BSD]: Likewise.
	* misc/bits/syslog.h [__USE_BSD]: Likewise.
	* misc/search.h [__USE_SVID]: Likewise.
	* misc/sys/mman.h [__USE_BSD]: Likewise.
	* misc/sys/syslog.h [__USE_BSD]: Likewise.
	* misc/sys/uio.h [__USE_BSD]: Likewise.
	* posix/bits/unistd.h [__USE_BSD]: Likewise.
	* posix/glob.h [__USE_BSD]: Likewise.
	* posix/regex.h [__USE_BSD]: Likewise.
	* posix/sys/types.h [__USE_BSD]: Likewise.
	[__USE_SVID]: Likewise.
	* posix/sys/utsname.h [__USE_SVID]: Likewise.
	* posix/sys/wait.h [__USE_BSD]: Likewise.
	[__USE_SVID]: Likewise.
	* posix/unistd.h [__USE_BSD]: Likewise.
	[__USE_SVID]: Likewise.
	* pwd/pwd.h [__USE_SVID]: Likewise.
	* resolv/netdb.h [__USE_BSD]: Likewise.
	* setjmp/setjmp.h [__USE_BSD]: Likewise.
	* signal/signal.h [__USE_BSD]: Likewise.
	[__USE_SVID]: Likewise.
	* socket/sys/socket.h [__USE_BSD]: Likewise.
	* stdlib/fmtmsg.h [__USE_SVID]: Likewise.
	* stdlib/stdlib.h [__USE_BSD]: Likewise.
	[__USE_SVID]: Likewise.
	* string/bits/string2.h [__USE_BSD]: Likewise.
	[__USE_SVID]: Likewise.
	* string/bits/string3.h [__USE_BSD]: Likewise.
	* string/endian.h [__USE_BSD]: Likewise.
	* string/string.h [__USE_SVID]: Likewise.
	[__USE_BSD]: Likewise.
	* string/strings.h [__USE_BSD]: Likewise.
	* sysdeps/generic/netinet/ip.h [__USE_BSD]: Likewise.
	* sysdeps/gnu/netinet/ip_icmp.h [__USE_BSD]: Likewise.
	* sysdeps/mach/hurd/bits/fcntl.h [__USE_BSD]: Likewise.
	* sysdeps/mach/hurd/bits/stat.h [__USE_BSD]: Likewise.
	* sysdeps/unix/sysv/linux/alpha/bits/mman.h [__USE_BSD]: Likewise.
	* sysdeps/unix/sysv/linux/alpha/bits/termios.h [__USE_BSD]:
	Likewise.
	* sysdeps/unix/sysv/linux/bits/fcntl-linux.h [__USE_BSD]:
	Likewise.
	* sysdeps/unix/sysv/linux/bits/mman-linux.h [__USE_BSD]: Likewise.
	* sysdeps/unix/sysv/linux/bits/sys_errlist.h [__USE_BSD]:
	Likewise.
	* sysdeps/unix/sysv/linux/bits/termios.h [__USE_BSD]: Likewise.
	* sysdeps/unix/sysv/linux/mips/bits/termios.h [__USE_BSD]:
	Likewise.
	* sysdeps/unix/sysv/linux/netinet/if_ether.h [__USE_BSD]:
	Likewise.
	* sysdeps/unix/sysv/linux/netinet/if_fddi.h [__USE_BSD]: Likewise.
	* sysdeps/unix/sysv/linux/netinet/if_tr.h [__USE_BSD]: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/bits/termios.h [__USE_BSD]:
	Likewise.
	* sysdeps/unix/sysv/linux/sparc/bits/termios.h [__USE_BSD]:
	Likewise.
	* sysdeps/x86/bits/string.h [__USE_BSD]: Likewise.
	* sysvipc/sys/ipc.h [__USE_SVID]: Likewise.
	* termios/termios.h [__USE_BSD]: Likewise.
	* time/sys/time.h [__USE_BSD]: Likewise.
	* time/time.h [__USE_BSD]: Likewise.
	[__USE_SVID]: Likewise.

	* sysdeps/unix/sysv/linux/hppa/bits/mman.h [__USE_BSD]: Change
	condition to [__USE_MISC].
2014-02-12 23:41:01 +00:00
Ondřej Bílka
a1ffb40e32 Use glibc_likely instead __builtin_expect. 2014-02-10 15:07:12 +01:00
Siddhesh Poyarekar
df675f9933 Fix infinite loop in ftell when writing wide char data (BZ #16398)
ftell tries to avoid flushing the buffer when it is in write mode by
converting the wide char data and placing it into the binary buffer.
If the output buffer space is full and there is data to write, the
code reverts to flushing the buffer.  This breaks when there is space
in the buffer but it is not enough to convert the next character in
the wide data buffer, due to which __codecvt_do_out returns a
__codecvt_partial status.  In this case, ftell keeps running in an
infinite loop.

The fix here is to detect the __codecvt_partial status in addition to
checking if the buffer is full.  I have also added a test case that
demonstrates the infinite loop.
2014-02-05 12:49:00 +05:30
Allan McRae
d4697bc93d Update copyright notices with scripts/update-copyrights 2014-01-01 22:00:23 +10:00
Siddhesh Poyarekar
0417b20fe6 Rename Oriya locale to Odia (bug 15601)
The state of Orissa was officially renamed the state to Odisha and the
language from Oriya to Odia in 2010.

References:

http://zeenews.india.com/election09/story.aspx?aid=739995
http://orissamatters.com/2011/11/07/orissa-became-odisha/
http://www.ndtv.com/article/india/parliament-passes-bill-to-change-orissa-s-name-93888
http://orissa.gov.in/e-magazine/Orissareview/2011/Nov/engpdf/9-17.pdf
2013-11-20 17:47:41 +05:30
Eric Biggers
3d110c7c6e Fix fwrite() reading beyond end of buffer in error path
Partially revert commits 2b766585f9 and
de2fd463b1, which were intended to fix BZ#11741
but caused another, likely worse bug, namely that fwrite() and fputs() could,
in an error path, read data beyond the end of the specified buffer, and
potentially even write this data to the file.

Fix BZ#11741 properly by checking the return value from _IO_padn() in
stdio-common/vfprintf.c.
2013-10-11 22:29:38 +05:30
Allan McRae
3932737df1 Fix memory leaks in libio on allocation failure 2013-09-09 22:52:25 +10:00
Joseph Myers
3f2e46a494 Remove --disable-versioning. 2013-09-04 15:25:42 +00:00
Ondřej Bílka
c0c3f78afb Fix typos. 2013-08-21 19:48:48 +02:00
Joseph Myers
60d2f8f3c7 Use (void) in no-arguments function definitions. 2013-06-08 00:22:23 +00:00
Joseph Myers
2e09a79ada Avoid use of "register" as optimization hint. 2013-06-07 22:24:35 +00:00
Ondrej Bilka
350635a59a Fix leading whitespaces. 2013-06-06 20:36:07 +02:00
Joseph Myers
9c84384cc1 Remove trailing whitespace. 2013-06-05 20:44:03 +00:00
Ondrej Bilka
bae143d270 Initialize wide struct info.
Fixes 15381.

Using wide character function is on byte oriented memstream is undefined
behaviour.  This behaviour was masked by not initializing wide struct
info. We now initialize it to cause a predictable crash.
2013-05-24 08:34:10 +02:00
Siddhesh Poyarekar
5cb26d0aed Fix off-by-one bug in tst-fwrite-error
tst-fwrite-error did not allocate enough space for the string 'world'
and its NULL terminator.  Fixed.
2013-04-15 11:35:43 +05:30
Roland McGrath
f1d70dad53 Remove lots of inline keywords. 2013-02-07 14:44:18 -08:00
H.J. Lu
740b3dbee8 Add --enable-hardcoded-path-in-tests configure option 2013-01-11 07:14:18 -08:00
Joseph Myers
568035b787 Update copyright notices with scripts/update-copyrights. 2013-01-02 19:05:09 +00:00
Joseph Myers
f4cf5f2d8b Add script to update copyright notices and reformat some to facilitate its use. 2013-01-01 16:29:10 +00:00
Mike Frysinger
eb6cbd249f [BZ #12724] libio: revert partial POSIX 2008 fclose support
In BZ #12724, partial support for POSIX 2008 fclose behavior was added.
Since it isn't entirely conforming to the spec, some applications are
known to be breaking in this intermediate state.  So revert the partial
support until we can get things fully implemented.

This reverts commit fcabc0f8b1.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-12-01 21:37:52 -05:00
Siddhesh Poyarekar
de2fd463b1 Make fwrite return 0 on EOF 2012-11-28 01:00:50 +05:30
Siddhesh Poyarekar
2b766585f9 printf should return negative value on error
[BZ #11741]
Fixed bug where printf and family may return a spurious success when
printing padded formats.
2012-11-16 19:13:11 +05:30
Siddhesh Poyarekar
b1848fdeec Note in a comment that references to C++ bits are obsolete
libio is not used by libstdc++ anymore, but there are references to
streambuf are all over.
2012-11-16 19:12:28 +05:30
Thomas Schwinge
341dd67392 Change type of constant to avoid a warning.
Warning has been introduced in commit 7583a88d1c.
2012-11-01 17:56:48 +01:00
Joseph Myers
03ac099f6b Define and use $(run-built-tests). 2012-10-24 00:08:46 +00:00
Joseph Myers
ced52c719c Remove _G_OPEN64, _G_LSEEK64, _G_MMAP64, _G_FSTAT64 from _G_config.h. 2012-10-18 18:50:43 +00:00
Joseph Myers
472371b9b0 Remove _IO_pos_t. 2012-10-10 16:05:36 +00:00
Joseph Myers
c8450f70fa Remove _G_off64_t and _G_stat64 from _G_config.h. 2012-10-09 15:09:32 +00:00
Siddhesh Poyarekar
adb26faefe Don't flush write buffer for ftell
[BZ #5298]
Use write pointer state along with the file offset and/or the read
pointers to get the current file position.
2012-09-28 18:38:14 +05:30
Siddhesh Poyarekar
4573c6b098 Adjust wide data buffer pointers during fseek and ftell
[BZ #14543]
Set the internal buffer state correctly whenever the external buffer
state is modified by fseek by either computing the current
_IO_read_ptr/end for the internal buffer based on the new _IO_read_ptr
in the external buffer or converting the content read into the
external buffer, up to the extent of the requested fseek offset.
2012-09-28 18:21:39 +05:30
Joseph Myers
203e56032f Remove various _G_*_t type names. 2012-09-25 12:37:37 +00:00
Siddhesh Poyarekar
2b4f00d1a4 Fix minor typos in comments 2012-09-25 09:28:43 +05:30
Dmitry V. Levin
57c69bef13 Set "fail on error" mode directly in testsuite shell scripts 2012-09-25 02:48:31 +00:00
Joseph Myers
431531094f Remove _G_HAVE_SYS_WAIT and _IO_HAVE_SYS_WAIT. 2012-09-21 10:02:03 +00:00
Joseph Myers
8a26625d21 Remove _G_NEED_STDARG_H. 2012-09-20 14:41:02 +00:00
Joseph Myers
b7aaa4d6d2 Remove _G_HAVE_IO_GETLINE_INFO. 2012-09-17 11:43:06 +00:00
Joseph Myers
ad35fc005b Remove _G_HAVE_PRINTF_FP. 2012-09-13 16:13:09 +00:00
Joseph Myers
28361c5ee4 Remove _G_USING_THUNKS. 2012-09-10 22:05:49 +00:00
Joseph Myers
0e886ef96e Remove libio C++ vtable definitions. 2012-09-10 21:22:42 +00:00
H.J. Lu
bcba7aa24d Run tst-fopenloc if $(build-shared) is yes 2012-09-10 11:13:54 -07:00
Siddhesh Poyarekar
1ffb8c9001 Fix typos in comments
* libio/fileops.c: Fix typos in comments.
        * libio/oldfileops.c: Likewise.
        * libio/wfileops.c: Likewise.
2012-09-05 22:04:57 +05:30
Joseph Myers
60160d83a0 Fix iogetdelim.c (latent) integer overflow (bug 9914). 2012-09-04 11:24:43 +00:00
Roland McGrath
b2e1c56272 Make libio compile without _IO_MTSAFE_IO. 2012-08-17 09:35:36 -07:00
Roland McGrath
c75ccd4c3a Clean up definition of _LIBC_REENTRANT and _IO_MTSAFE_IO. 2012-08-17 09:35:15 -07:00
Roland McGrath
03af952060 Clean up lockf64, fseeko64, ftello64, fgetpos64, fsetpos64 for off64_t == off_t. 2012-08-06 16:48:14 -07:00
Roland McGrath
2747bf9adf Clean up fopen64 for O_LARGEFILE==0. 2012-08-01 16:30:47 -07:00
Roland McGrath
bea9b19322 Fix lots of bitrot for stub configurations. 2012-07-30 16:34:33 -07:00
Andreas Schwab
d18ea0c5e6 Remove use of INTDEF/INTUSE in libio 2012-05-24 23:06:20 +02:00
Thomas Schwinge
dc70356cbf Avoid dup3 PLT usage.
Fixes fallout from 5aa3a74a59.
2012-05-12 10:53:04 +08:00
Thomas Schwinge
37233df9d1 Hurd: #include <kernel-features.h> 2012-05-10 15:57:24 -07:00
Joseph Myers
54b71e0283 Fix conditions on checking versions of dprintf (bug 13775). 2012-05-03 18:42:37 +00:00
Marek Polacek
5ac3ea17df Fix attributes for fortify functions. 2012-04-29 15:34:20 +02:00
Roland McGrath
ec98af7d1b Update comment for _io_write_fn
[BZ #2074]
	* libio/libio.h (__io_write_fn): Update comment.
2012-04-12 21:02:00 +02:00
Jim Meyering
288f9098cb Remove __wur from fwrite, fwrite_unlocked
[BZ #11959]
        * libio/stdio.h (fwrite, fwrite_unlocked): Remove __wur.
        It is not necessarily an error to ignore fwrite's return
        value.  One can reliably use ferror to test for errors after
        the fact.
2012-04-11 21:03:57 +02:00
David S. Miller
20fde22738 Remove xsputn small copy optimization.
* libio/fileops.c (_IO_new_file_xsputn): Don't try to optimize
	small copies by hand.
2012-03-29 14:38:27 -07:00