Since -1 isn't a power of two, compiler may reject it, hide memalign from
Clang 19 which issues an error:
tst-memalign.c:86:31: error: requested alignment is not a power of 2 [-Werror,-Wnon-power-of-two-alignment]
86 | p = memalign (-1, pagesize);
| ^~
tst-memalign.c:86:31: error: requested alignment must be 4294967296 bytes or smaller; maximum alignment assumed [-Werror,-Wbuiltin-assume-aligned-alignment]
86 | p = memalign (-1, pagesize);
| ^~
Update tst-malloc-aux.h to hide all malloc functions and include it in
all malloc tests to prevent compiler from optimizing out any malloc
functions.
Tested with Clang 19.1.5 and GCC 15 20241206 for BZ #32366.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Sam James <sam@gentoo.org>
(cherry picked from commit f9493a15ea9cfb63a815c00c23142369ec09d8ce)
Include the space needed to store the length of the message itself, in
addition to the message string. This resolves BZ #32582.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 68ee0f704cb81e9ad0a78c644a83e1e9cd2ee578)
Make sure to update the random value also if getrandom fails.
Fixes: 686d542025 ("posix: Sync tempname with gnulib")
(cherry picked from commit 5f62cf88c4530c11904482775b7582bd7f6d80d2)
This simplifies the handling of sanity check errors in clone.S.
Adjusted a couple of comments to reflect current code.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
This change implements vfork.S for direct support of the vfork
syscall. clone.S is revised to correct child support for the
vfork case.
The main bug was creating a frame prior to the clone syscall.
This was done to allow the rp and r4 registers to be saved and
restored from the stack frame. r4 was used to save and restore
the PIC register, r19, across the system call and the call to
set errno. But in the vfork case, it is undefined behavior
for the child to return from the function in which vfork was
called. It is surprising that this usually worked.
Syscalls on hppa save and restore rp and r19, so we don't need
to create a frame prior to the clone syscall. We only need a
frame when __syscall_error is called. We also don't need to
save and restore r19 around the call to $$dyncall as r19 is not
used in the code after $$dyncall.
This considerably simplifies clone.S.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Some hypervisors report 1 TiB L3 cache size. This results
in some variables incorrectly getting zeroed, causing crashes
in memcpy/memmove because invariants are violated.
(cherry picked from commit 61c3450db96dce96ad2b24b4f0b548e6a46d68e5)
Since internal tests don't have access to internal symbols in libm,
exclude them for internal tests. Also make tst-strtod5 and tst-strtod5i
depend on $(libm) to support older versions of GCC which can't inline
copysign family functions. This fixes BZ #32414.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
(cherry picked from commit 5df09b444835fca6e64b3d4b4a5beb19b3b2ba21)
The commit 'sparc: Use Linux kABI for syscall return'
(86c5d2cf0ce046279baddc7faa27da71f1a89fde) did not take into account
a subtle sparc syscall kABI constraint. For syscalls that might block
indefinitely, on an interrupt (like SIGCONT) the kernel will set the
instruction pointer to just before the syscall:
arch/sparc/kernel/signal_64.c
476 static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
477 {
[...]
525 if (restart_syscall) {
526 switch (regs->u_regs[UREG_I0]) {
527 case ERESTARTNOHAND:
528 case ERESTARTSYS:
529 case ERESTARTNOINTR:
530 /* replay the system call when we are done */
531 regs->u_regs[UREG_I0] = orig_i0;
532 regs->tpc -= 4;
533 regs->tnpc -= 4;
534 pt_regs_clear_syscall(regs);
535 fallthrough;
536 case ERESTART_RESTARTBLOCK:
537 regs->u_regs[UREG_G1] = __NR_restart_syscall;
538 regs->tpc -= 4;
539 regs->tnpc -= 4;
540 pt_regs_clear_syscall(regs);
541 }
However, on a SIGCONT it seems that 'g1' register is being clobbered after the
syscall returns. Before 86c5d2cf0ce046279, the 'g1' was always placed jus
before the 'ta' instruction which then reloads the syscall number and restarts
the syscall.
On master, where 'g1' might be placed before 'ta':
$ cat test.c
#include <unistd.h>
int main ()
{
pause ();
}
$ gcc test.c -o test
$ strace -f ./t
[...]
ppoll(NULL, 0, NULL, NULL, 0
On another terminal
$ kill -STOP 2262828
$ strace -f ./t
[...]
--- SIGSTOP {si_signo=SIGSTOP, si_code=SI_USER, si_pid=2521813, si_uid=8289} ---
--- stopped by SIGSTOP ---
And then
$ kill -CONT 2262828
Results in:
--- SIGCONT {si_signo=SIGCONT, si_code=SI_USER, si_pid=2521813, si_uid=8289} ---
restart_syscall(<... resuming interrupted ppoll ...>) = -1 EINTR (Interrupted system call)
Where the expected behaviour would be:
$ strace -f ./t
[...]
ppoll(NULL, 0, NULL, NULL, 0) = ? ERESTARTNOHAND (To be restarted if no handler)
--- SIGSTOP {si_signo=SIGSTOP, si_code=SI_USER, si_pid=2521813, si_uid=8289} ---
--- stopped by SIGSTOP ---
--- SIGCONT {si_signo=SIGCONT, si_code=SI_USER, si_pid=2521813, si_uid=8289} ---
ppoll(NULL, 0, NULL, NULL, 0
Just moving the 'g1' setting near the syscall asm is not suffice,
the compiler might optimize it away (as I saw on cancellation.c by
trying this fix). Instead, I have change the inline asm to put the
'g1' setup in ithe asm block. This would require to change the asm
constraint for INTERNAL_SYSCALL_NCS, since the syscall number is not
constant.
Checked on sparc64-linux-gnu.
Reported-by: René Rebe <rene@exactcode.de>
Tested-by: Sam James <sam@gentoo.org>
Reviewed-by: Sam James <sam@gentoo.org>
(cherry picked from commit 2c1903cbbac0022153a67776f474c221250ad6ed)
(cherry picked from commit 1cd7e13289b91e1495a1865c1f678196d1bb7be4)
So caller can check which state was found if multiple ones are
asked.
Checked on x86_64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit 38316352e0f742f3a2b5816a61a4b603cb5573f8)
(cherry picked from commit 2e38c5a090b3a54040b6e508d42e5a76e492c6e8)
GCC 15 introduces allocation dead code removal (DCE) for PR117370 in
r15-5255-g7828dc070510f8. This breaks various glibc tests which want
to assert various properties of the allocator without doing anything
obviously useful with the allocated memory.
Alexander Monakov rightly pointed out that we can and should do better
than passing -fno-malloc-dce to paper over the problem. Not least because
GCC 14 already does such DCE where there's no testing of malloc's return
value against NULL, and LLVM has such optimisations too.
Handle this by providing malloc (and friends) wrappers with a volatile
function pointer to obscure that we're calling malloc (et. al) from the
compiler.
Reviewed-by: Paul Eggert <eggert@cs.ucla.edu>
(cherry picked from commit a9944a52c967ce76a5894c30d0274b824df43c7a)
When adding explicit initialization of rseq fields prior to
registration, I glossed over the fact that 'cpu_id_start' is also
documented as initialized by user-space.
While current kernels don't validate the content of this field on
registration, future ones could.
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
(cherry picked from commit d9f40387d3305d97e30a8cf8724218c42a63680a)
Per the rseq syscall documentation, 3 fields are required to be
initialized by userspace prior to registration, they are 'cpu_id',
'rseq_cs' and 'flags'. Since we have no guarantee that 'struct pthread'
is cleared on all architectures, explicitly set those 3 fields prior to
registration.
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit 97f60abd25628425971f07e9b0e7f8eec0741235)
The remaining_to_add variable can be 0 if (current_used + count) wraps,
This is caught by GCC 14+ on hppa, which determines from there that
target_seg could be be NULL when remaining_to_add is zero, which in
turns causes a -Wstringop-overflow warning:
In file included from ../include/atomic.h:49,
from dl-find_object.c:20:
In function '_dlfo_update_init_seg',
inlined from '_dl_find_object_update_1' at dl-find_object.c:689:30,
inlined from '_dl_find_object_update' at dl-find_object.c:805:13:
../sysdeps/unix/sysv/linux/hppa/atomic-machine.h:44:4: error: '__atomic_store_4' writing 4 bytes into a region of size 0 overflows the destination [-Werror=stringop-overflow=]
44 | __atomic_store_n ((mem), (val), __ATOMIC_RELAXED); \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
dl-find_object.c:644:3: note: in expansion of macro 'atomic_store_relaxed'
644 | atomic_store_relaxed (&seg->size, new_seg_size);
| ^~~~~~~~~~~~~~~~~~~~
In function '_dl_find_object_update':
cc1: note: destination object is likely at address zero
In practice, this is not possible as it represent counts of link maps.
Link maps have sizes larger than 1 byte, so the sum of any two link map
counts will always fit within a size_t without wrapping around.
This patch therefore adds a check on remaining_to_add == 0 and tell GCC
that this can not happen using __builtin_unreachable.
Thanks to Andreas Schwab for the investigation.
Closes: BZ #32245
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: John David Anglin <dave.anglin@bell.net>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit 6c915c73d08028987232f6dc718f218c61113240)
The sparc clone mitigation (faeaa3bc9f76030) added the use of
flushw, which is not support by LEON/sparcv8. As discussed on
the libc-alpha, 'ta 3' is a working alternative [1].
[1] https://sourceware.org/pipermail/libc-alpha/2024-August/158905.html
Checked with a build for sparcv8-linux-gnu targetting leon.
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
(cherry picked from commit 5e8cfc5d625e6dd000a0371d21d792836ea7951a)
In commit c628c2296392ed3bf2cb8d8470668e64fe53389f (elf: Remove
ldconfig kernel version check), the layout of auxcache entries
changed because the osversion field was removed from
struct aux_cache_file_entry. However, AUX_CACHEMAGIC was not
changed, so existing files are still used, potentially leading
to unintended ldconfig behavior. This commit changes AUX_CACHEMAGIC,
so that the file is regenerated.
Reported-by: DJ Delorie <dj@redhat.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 0a536f6e2f76e3ef581b3fd9af1e5cf4ddc7a5a2)
The test tst-strtod-underflow covers various edge cases close to the
underflow threshold for strtod (especially cases where underflow on
architectures with after-rounding tininess detection depends on the
rounding mode). Make it use the type-generic machinery, with
corresponding test inputs for each supported floating-point format, so
that other functions in the strtod family are tested for underflow
edge cases as well.
Tested for x86_64.
(cherry picked from commit 94ca2c0894f0e1b62625c369cc598a2b9236622c)
Since _IO_vtable_offset is used to detect the old binaries, set it
in _IO_old_file_init_internal before calling _IO_link_in which checks
_IO_vtable_offset. Add a glibc 2.0 test with copy relocation on
_IO_stderr_@GLIBC_2.0 to verify that fopen won't cause memory corruption.
This fixes BZ #32148.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
(cherry picked from commit 9dfea3de7f690bff70e3c6eb346b9ad082bb2e35)
There is very little test coverage of inputs to strtod-family
functions that don't contain anything that can be parsed as a number
(one test of ".y" in tst-strtod2), and none that I can see of skipping
initial whitespace. Add some tests of these things to tst-strtod2.
Tested for x86_64.
(cherry picked from commit 378039ca578c2ea93095a1e710d96f58c68a3997)
Although there are some tests in tst-strtod2 and tst-strtod3 for the
end pointer provided by strtod when it doesn't parse the whole string,
they aren't very thorough. Add tests of more such cases to
tst-strtod2.
Tested for x86_64.
(cherry picked from commit b5d3737b305525315e0c7c93ca49eadc868eabd5)
Some of the strtod tests use type-generic machinery in tst-strtod.h to
test the strto* functions for all floating types, while others only
test double even when the tests are in fact meaningful for all
floating types.
Convert tst-strtod2 and tst-strtod5 to use the type-generic machinery
so they test all floating types. I haven't tried to convert them to
use newer test interfaces in other ways, just made the changes
necessary to use the type-generic machinery.
Tested for x86_64.
(cherry picked from commit 8de031bcb9adfa736c0caed2c79d10947b8d8f48)
As reported in bug 32045, it's incorrect for strtod/nan functions to
set errno based on overflowing payload (strtod should only set errno
for overflow / underflow of its actual result, and potentially if
nothing in the string can be parsed as a number at all; nan should be
a pure function that never sets it). Save and restore errno around
the internal strtoull call and add associated test coverage.
Tested for x86_64.
(cherry picked from commit 64f62c47e9c350f353336f2df6714e1d48ec50d8)
There are two separate sets of tests of NaN payloads in glibc:
* libm-test-{get,set}payload* verify that getpayload, setpayload,
setpayloadsig and __builtin_nan functions are consistent in their
payload handling.
* test-nan-payload verifies that strtod-family functions and the
not-built-in nan functions are consistent in their payload handling.
Nothing, however, connects the two sets of functions (i.e., verifies
that strtod / nan are consistent with getpayload / setpayload /
__builtin_nan).
Improve test-nan-payload to check actual payload value with getpayload
rather than just verifying that the strtod and nan functions produce
the same NaN. Also check that the NaNs produced aren't signaling and
extend the tests to cover _FloatN / _FloatNx.
Tested for x86_64.
(cherry picked from commit be77d5ae417236883c02d3d67c0716e3f669fa41)
Some of the strtod tests use type-generic machinery in tst-strtod.h to
test the strto* functions for all floating types, while others only
test double even when the tests are in fact meaningful for all
floating types.
Convert the tests of the internal __strtod_internal interface to cover
all floating types. I haven't tried to convert them to use newer test
interfaces in other ways, just made the changes necessary to use the
type-generic machinery. As an internal interface, there are no
aliases for different types with the same ABI (however,
__strtold_internal is defined even if long double has the same ABI as
double), so macros used by the type-generic testing code are redefined
as needed to avoid expecting such aliases to be present.
Tested for x86_64.
(cherry picked from commit 3fc063dee01da4f80920a14b7db637c8501d6fd4)
As reported in bug 30220, the implementation of strtod-family
functions has a bug in the following case: the input string would,
with infinite exponent range, take one more bit to represent than is
available in the normal precision of the return type; the value
represented is in the subnormal range; and there are no nonzero bits
in the value, below those that can be represented in subnormal
precision, other than the least significant bit and possibly the
0.5ulp bit. In this case, round_and_return ends up discarding the
least significant bit.
Fix by saving that bit to merge into more_bits (it can't be merged in
at the time it's computed, because more_bits mustn't include this bit
in the case of after-rounding tininess detection checking if the
result is still subnormal when rounded to normal precision, so merging
this bit into more_bits needs to take place after that check).
Tested for x86_64.
(cherry picked from commit 457622c2fa8f9f7435822d5287a437bc8be8090d)
Add tests of underflow in tst-strtod-round, and thus also test for
errno being unchanged when there is neither overflow nor underflow.
The errno setting before the function call to test for being unchanged
is adjusted to set errno to 12345 instead of 0, so that any bugs where
strtod sets errno to 0 would be detected.
This doesn't add any new test inputs for tst-strtod-round, and in
particular doesn't cover the edge cases of underflow the way
tst-strtod-underflow does (none of the existing test inputs for
tst-strtod-round actually exercise cases that have underflow with
before-rounding tininess detection but not with after-rounding
tininess detection), but at least it provides some coverage (as per
the recent discussions) that ordinary non-overflowing non-underflowing
inputs to these functions do not set errno.
Tested for x86_64.
(cherry picked from commit d73ed2601b7c3c93c3529149a3d7f7b6177900a8)
We have no tests that errno is set to ERANGE on overflow of
strtod-family functions (we do have some tests for underflow, in
tst-strtod-underflow). Add such tests to tst-strtod-round.
Tested for x86_64.
(cherry picked from commit 207d64feb26279e152c50744e3c37e68491aca99)
There seem to be no glibc tests specifically for the fread function.
Add basic tests of that function.
Tested for x86_64.
(cherry picked from commit d14c977c65aac7db35bb59380ef99d6582c4f930)
This commit adds fdopen test with all modes.
Reviewed-by: DJ Delorie <dj@redhat.com>
(cherry picked from commit 1d72fa3cfa046f7293421a7e58f2a272474ea901)
_wide_data and _mode are not available in legacy code, so do not attempt
to free the wide backup buffer in legacy code.
Resolves: BZ #32137 and BZ #27821
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit ae4d44b1d501421ad9a3af95279b8f4d1546f1ce)
The reading loops did not check for read failures. Addresses
a static analysis report.
Manually tested by compiling a program with the GCC's
-finstrument-functions option, running it with
“LD_PRELOAD=debug/libpcprofile.so PCPROFILE_OUTPUT=output-file”,
and reviewing the output of “debug/pcprofiledump output-file”.
(cherry picked from commit 89b088bf70c651c231bf27e644270d093b8f144a)
The old code used l_init_called as an indicator for whether TLS
initialization was complete. However, it is possible that
TLS for an object is initialized, written to, and then dlopen
for this object is called again, and l_init_called is not true at
this point. Previously, this resulted in TLS being initialized
twice, discarding any interim writes (technically introducing a
use-after-free bug even).
This commit introduces an explicit per-object flag, l_tls_in_slotinfo.
It indicates whether _dl_add_to_slotinfo has been called for this
object. This flag is used to avoid double-initialization of TLS.
In update_tls_slotinfo, the first_static_tls micro-optimization
is removed because preserving the initalization flag for subsequent
use by the second loop for static TLS is a bit complicated, and
another per-object flag does not seem to be worth it. Furthermore,
the l_init_called flag is dropped from the second loop (for static
TLS initialization) because l_need_tls_init on its own prevents
double-initialization.
The remaining l_init_called usage in resize_scopes and update_scopes
is just an optimization due to the use of scope_has_map, so it is
not changed in this commit.
The isupper check ensures that libc.so.6 is TLS is not reverted.
Such a revert happens if l_need_tls_init is not cleared in
_dl_allocate_tls_init for the main_thread case, now that
l_init_called is not checked anymore in update_tls_slotinfo
in elf/dl-open.c.
Reported-by: Jonathon Anderson <janderson@rice.edu>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 5097cd344fd243fb8deb6dec96e8073753f962f9)
Also remove an outdated comment: _dl_allocate_tls_init is
called as part of pthread_create.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit fe06fb313bddf7e4530056897d4a706606e49377)
Remove local FAIL macro in favor to FAIL_EXIT1 from <support/check.h>,
which provides equivalent reporting, with the name of the file and the
line number within of the failure site additionally included. Remove
FAIL_ERR altogether and include ": %m" explicitly with the format string
supplied to FAIL_EXIT1 as there seems little value to have a separate
macro just for this.
Reviewed-by: DJ Delorie <dj@redhat.com>
(cherry picked from commit 8c98195af6e6f1ce21743fc26c723e0f7e45bcf2)
Remove local FAIL macro in favor to FAIL_RET from <support/check.h>,
which provides equivalent reporting, with the name of the file of the
failure site additionally included, for the tst-truncate-common core
shared between the tst-truncate and tst-truncate64 tests.
Reviewed-by: DJ Delorie <dj@redhat.com>
(cherry picked from commit fe47595504a55e7bb992f8928533df154b510383)
If a file descriptor is left unclosed and is cleaned up by _IO_cleanup
on exit, its backup buffer remains unfreed, registering as a leak in
valgrind. This is not strictly an issue since (1) the program should
ideally be closing the stream once it's not in use and (2) the program
is about to exit anyway, so keeping the backup buffer around a wee bit
longer isn't a real problem. Free it anyway to keep valgrind happy
when the streams in question are the standard ones, i.e. stdout, stdin
or stderr.
Also, the _IO_have_backup macro checks for _IO_save_base,
which is a roundabout way to check for a backup buffer instead of
directly looking for _IO_backup_base. The roundabout check breaks when
the main get area has not been used and user pushes a char into the
backup buffer with ungetc. Fix this to use the _IO_backup_base
directly.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 3e1d8d1d1dca24ae90df2ea826a8916896fc7e77)
When ungetc is called on an unused stream, the backup buffer is
allocated without the main get area being present. This results in
every subsequent ungetc (as the stream remains in the backup area)
checking uninitialized memory in the backup buffer when trying to put a
character back into the stream.
Avoid comparing the input character with buffer contents when in backup
to avoid this uninitialized read. The uninitialized read is harmless in
this context since the location is promptly overwritten with the input
character, thus fulfilling ungetc functionality.
Also adjust wording in the manual to drop the paragraph that says glibc
cannot do multiple ungetc back to back since with this change, ungetc
can actually do this.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit cdf0f88f97b0aaceb894cc02b21159d148d7065c)
Complement commit b03e4d7bd25b ("stdio: fix vfscanf with matches longer
than INT_MAX (bug 27650)") and add a test case for the issue, inspired
by the reproducer provided with the bug report.
This has been verified to succeed as from the commit referred and fail
beforehand.
As the test requires 2GiB of data to be passed around its performance
has been evaluated using a choice of systems and the execution time
determined to be respectively in the range of 9s for POWER9@2.166GHz,
24s for FU740@1.2GHz, and 40s for 74Kf@950MHz. As this is on the verge
of and beyond the default timeout it has been increased by the factor of
8. Regardless, following recent practice the test has been added to the
standard rather than extended set.
Reviewed-by: DJ Delorie <dj@redhat.com>
(cherry picked from commit 89cddc8a7096f3d9225868304d2bc0a1aaf07d63)
Add a FAIL test failure helper analogous to FAIL_RET, that does not
cause the current function to return, providing a standardized way to
report a test failure with a message supplied while permitting the
caller to continue executing, for further reporting, cleaning up, etc.
Update existing test cases that provide a conflicting definition of FAIL
by removing the local FAIL definition and then as follows:
- tst-fortify-syslog: provide a meaningful message in addition to the
file name already added by <support/check.h>; 'support_record_failure'
is already called by 'support_print_failure_impl' invoked by the new
FAIL test failure helper.
- tst-ctype: no update to FAIL calls required, with the name of the file
and the line number within of the failure site additionally included
by the new FAIL test failure helper, and error counting plus count
reporting upon test program termination also already provided by
'support_record_failure' and 'support_report_failure' respectively,
called by 'support_print_failure_impl' and 'adjust_exit_status' also
respectively. However in a number of places 'printf' is called and
the error count adjusted by hand, so update these places to make use
of FAIL instead. And last but not least adjust the final summary just
to report completion, with any error count following as reported by
the test driver.
- test-tgmath2: no update to FAIL calls required, with the name of the
file of the failure site additionally included by the new FAIL test
failure helper. Also there is no need to track the return status by
hand as any call to FAIL will eventually cause the test case to return
an unsuccesful exit status regardless of the return status from the
test function, via a call to 'adjust_exit_status' made by the test
driver.
Reviewed-by: DJ Delorie <dj@redhat.com>
(cherry picked from commit 1b97a9f23bf605ca608162089c94187573fb2a9e)
Secondary namespaces have a different malloc. Allocating the
buffer in one namespace and freeing it another results in
heap corruption. Fix this by using a static string (potentially
translated) in secondary namespaces. It would also be possible
to use the malloc from the initial namespace to manage the
buffer, but these functions would still not be safe to use in
auditors etc. because a call to strerror could still free a
buffer while it is used by the application. Another approach
could use proper initial-exec TLS, duplicated in secondary
namespaces, but that would need a callback interface for freeing
libc resources in namespaces on thread exit, which does not exist
today.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 25a5eb4010df94b412c67db9e346029de316d06b)
Issue was we were expecting not matches with CHAR before the start of
the string in the page cross case.
The check code in the page cross case:
```
and $0xffffffffffffffc0,%rax
vmovdqa64 (%rax),%zmm17
vpcmpneqb %zmm17,%zmm16,%k1
vptestmb %zmm17,%zmm17,%k0{%k1}
kmovq %k0,%rax
inc %rax
shr %cl,%rax
je L(continue)
```
expects that all characters that neither match null nor CHAR will be
1s in `rax` prior to the `inc`. Then the `inc` will overflow all of
the 1s where no relevant match was found.
This is incorrect in the page-cross case, as the
`vmovdqa64 (%rax),%zmm17` loads from before the start of the input
string.
If there are matches with CHAR before the start of the string, `rax`
won't properly overflow.
The fix is quite simple. Just replace:
```
inc %rax
shr %cl,%rax
```
With:
```
sar %cl,%rax
inc %rax
```
The arithmetic shift will clear any matches prior to the start of the
string while maintaining the signbit so the 1s can properly overflow
to zero in the case of no matches.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit 7da08862471dfec6fdae731c2a5f351ad485c71f)
Use RXX_LP in RTLD_START_ENABLE_X86_FEATURES. Support shadow stack during
startup for Linux 6.10:
commit 2883f01ec37dd8668e7222dfdb5980c86fdfe277
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Fri Mar 15 07:04:33 2024 -0700
x86/shstk: Enable shadow stacks for x32
1. Add shadow stack support to x32 signal.
2. Use the 64-bit map_shadow_stack syscall for x32.
3. Set up shadow stack for x32.
Add the map_shadow_stack system call to <fixup-asm-unistd.h> and regenerate
arch-syscall.h. Tested on Intel Tiger Lake with CET enabled x32. There
are no regressions with CET enabled x86-64. There are no changes in CET
enabled x86-64 _dl_start_user.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
(cherry picked from commit 8344c1f5514b1b5b1c8c6e48f4b802653bd23b71)
Remove sysdeps/x86_64/x32/dl-machine.h by folding x32 ARCH_LA_PLTENTER,
ARCH_LA_PLTEXIT and RTLD_START into sysdeps/x86_64/dl-machine.h. There
are no regressions on x86-64 nor x32. There are no changes in x86-64
_dl_start_user. On x32, _dl_start_user changes are
<_dl_start_user>:
mov %eax,%r12d
+ mov %esp,%r13d
mov (%rsp),%edx
mov %edx,%esi
- mov %esp,%r13d
and $0xfffffff0,%esp
mov 0x0(%rip),%edi # <_dl_start_user+0x14>
lea 0x8(%r13,%rdx,4),%ecx
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
(cherry picked from commit 652c6cf26927352fc0e37e4e60c6fc98ddf6d3b4)
This avoids crashes if a test is passed unknown options.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit c2a474f4617ede7a8bf56b7257acb37dc757b2d1)
This is a follow-up to 10de4a47ef3f481592e3c62eb07bcda23e9fde4d that
reworded the manual entries for putc and putwc and removed any
performance claims.
This commit further clarifies these entries and brings getc and getwc in
line with the descriptions of putc and putwc, removing any performance
claims from them as well.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit 942670c81dc8071dd75d6213e771daa5d2084cb6)
