Include the space needed to store the length of the message itself, in
addition to the message string. This resolves BZ #32582.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 68ee0f704cb81e9ad0a78c644a83e1e9cd2ee578)
Conflict in sysdeps/posix/libc_fatal.c due to missing cleanup after
backtrace removal.
Some hypervisors report 1 TiB L3 cache size. This results
in some variables incorrectly getting zeroed, causing crashes
in memcpy/memmove because invariants are violated.
(cherry picked from commit 61c3450db96dce96ad2b24b4f0b548e6a46d68e5)
In commit c628c2296392ed3bf2cb8d8470668e64fe53389f (elf: Remove
ldconfig kernel version check), the layout of auxcache entries
changed because the osversion field was removed from
struct aux_cache_file_entry. However, AUX_CACHEMAGIC was not
changed, so existing files are still used, potentially leading
to unintended ldconfig behavior. This commit changes AUX_CACHEMAGIC,
so that the file is regenerated.
Reported-by: DJ Delorie <dj@redhat.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 0a536f6e2f76e3ef581b3fd9af1e5cf4ddc7a5a2)
_wide_data and _mode are not available in legacy code, so do not attempt
to free the wide backup buffer in legacy code.
Resolves: BZ #32137 and BZ #27821
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit ae4d44b1d501421ad9a3af95279b8f4d1546f1ce)
Rename the identifier sz to __sz everywhere.
Fixes: a643f60c53 ("Make sure that the fortified function conditionals are constant")
(cherry picked from commit 39ca997ab378990d5ac1aadbaa52aaf1db6d526f)
(redone from scratch because of many conflicts)
Update the mremap C implementation to support the optional argument for
MREMAP_DONTUNMAP added in Linux 5.7 since it may not always be correct
to implement a variadic function as a non-variadic function on all Linux
targets. Return MAP_FAILED and set errno to EINVAL for unknown flag bits.
This fixes BZ #31968.
Note: A test must be added when a new flag bit is introduced.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 6c40cb0e9f893d49dc7caee580a055de53562206)
This avoids changing _res.options, which inteferes with change
detection as part of automatic reloading of /etc/resolv.conf.
Reviewed-by: DJ Delorie <dj@redhat.com>
(cherry picked from commit 868ab8923a2ec977faafec97ecafac0c3159c1b2)
In single-request mode, there is no second response after an error
because the second query has not been sent yet. Waiting for it
introduces an unnecessary timeout.
Reviewed-by: DJ Delorie <dj@redhat.com>
(cherry picked from commit af625987d619388a100b153520d3ee308bda9889)
The __rseq_size value is now the active area of struct rseq
(so 20 initially), not the full struct size including padding
at the end (32 initially).
Update misc/tst-rseq to print some additional diagnostics.
Reviewed-by: Michael Jeanson <mjeanson@efficios.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
(cherry picked from commit 2e456ccf0c34a056e3ccafac4a0c7effef14d918)
_dl_tlsdesc_undefweak and _dl_tlsdesc_dynamic access the thread pointer
via the tcb field in TCB:
_dl_tlsdesc_undefweak:
_CET_ENDBR
movq 8(%rax), %rax
subq %fs:0, %rax
ret
_dl_tlsdesc_dynamic:
...
subq %fs:0, %rax
movq -8(%rsp), %rdi
ret
Since the tcb field in TCB is a pointer, %fs:0 is a 32-bit location,
not 64-bit. It should use "sub %fs:0, %RAX_LP" instead. Since
_dl_tlsdesc_undefweak returns ptrdiff_t and _dl_make_tlsdesc_dynamic
returns void *, RAX_LP is appropriate here for x32 and x86-64. This
fixes BZ #31185.
(cherry picked from commit 81be2a61dafc168327c1639e97b6dae128c7ccf3)
On x32, I got
FAIL: elf/tst-tlsgap
$ gdb elf/tst-tlsgap
...
open tst-tlsgap-mod1.so
Thread 2 "tst-tlsgap" received signal SIGSEGV, Segmentation fault.
[Switching to LWP 2268754]
_dl_tlsdesc_dynamic () at ../sysdeps/x86_64/dl-tlsdesc.S:108
108 movq (%rsi), %rax
(gdb) p/x $rsi
$4 = 0xf7dbf9005655fb18
(gdb)
This is caused by
_dl_tlsdesc_dynamic:
_CET_ENDBR
/* Preserve call-clobbered registers that we modify.
We need two scratch regs anyway. */
movq %rsi, -16(%rsp)
movq %fs:DTV_OFFSET, %rsi
Since the dtv field in TCB is a pointer, %fs:DTV_OFFSET is a 32-bit
location, not 64-bit. Load the dtv field to RSI_LP instead of rsi.
This fixes BZ #31184.
(cherry picked from commit 3502440397bbb840e2f7223734aa5cc2cc0e29b6)
The string parsing routine may end up writing beyond bounds of tunestr
if the input tunable string is malformed, of the form name=name=val.
This gets processed twice, first as name=name=val and next as name=val,
resulting in tunestr being name=name=val:name=val, thus overflowing
tunestr.
Terminate the parsing loop at the first instance itself so that tunestr
does not overflow.
This also fixes up tst-env-setuid-tunables to actually handle failures
correct and add new tests to validate the fix for this CVE.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 1056e5b4c3f2d90ed2b4a55f96add28da2f4c8fa)
These are tracked in BZ #30884 and BZ #30843.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
(cherry picked from commit fd134feba35fa839018965733b34d28a09a075dd)
Commit 5f828ff824e3b7cd1 ("io: Fix F_GETLK, F_SETLK, and F_SETLKW for
powerpc64") fixed an issue with the value of the lock constants on
powerpc64 when not using __USE_FILE_OFFSET64, but it ended-up also
changing the value when using __USE_FILE_OFFSET64 causing an API change.
Fix that by also checking that define, restoring the pre
4d0fe291aed3a476a commit values:
Default values:
- F_GETLK: 5
- F_SETLK: 6
- F_SETLKW: 7
With -D_FILE_OFFSET_BITS=64:
- F_GETLK: 12
- F_SETLK: 13
- F_SETLKW: 14
At the same time, it has been noticed that there was no test for io lock
with __USE_FILE_OFFSET64, so just add one.
Tested on x86_64-linux-gnu, i686-linux-gnu and
powerpc64le-unknown-linux-gnu.
Resolves: BZ #30804.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
(cherry picked from commit 434bf72a94de68f0cc7fbf3c44bf38c1911b70cb)
Without passing alt_dns_packet_buffer, __res_context_search can only
store 2048 bytes (what fits into dns_packet_buffer). However,
the function returns the total packet size, and the subsequent
DNS parsing code in _nss_dns_gethostbyname4_r reads beyond the end
of the stack-allocated buffer.
Fixes commit f282cdbe7f436c75864e5640a4 ("resolv: Implement no-aaaa
stub resolver option") and bug 30842.
(cherry picked from commit bd77dd7e73e3530203be1c52c8a29d08270cb25d)
The current implementation of dlclose (and process exit) re-sorts the
link maps before calling ELF destructors. Destructor order is not the
reverse of the constructor order as a result: The second sort takes
relocation dependencies into account, and other differences can result
from ambiguous inputs, such as cycles. (The force_first handling in
_dl_sort_maps is not effective for dlclose.) After the changes in
this commit, there is still a required difference due to
dlopen/dlclose ordering by the application, but the previous
discrepancies went beyond that.
A new global (namespace-spanning) list of link maps,
_dl_init_called_list, is updated right before ELF constructors are
called from _dl_init.
In dl_close_worker, the maps variable, an on-stack variable length
array, is eliminated. (VLAs are problematic, and dlclose should not
call malloc because it cannot readily deal with malloc failure.)
Marking still-used objects uses the namespace list directly, with
next and next_idx replacing the done_index variable.
After marking, _dl_init_called_list is used to call the destructors
of now-unused maps in reverse destructor order. These destructors
can call dlopen. Previously, new objects do not have l_map_used set.
This had to change: There is no copy of the link map list anymore,
so processing would cover newly opened (and unmarked) mappings,
unloading them. Now, _dl_init (indirectly) sets l_map_used, too.
(dlclose is handled by the existing reentrancy guard.)
After _dl_init_called_list traversal, two more loops follow. The
processing order changes to the original link map order in the
namespace. Previously, dependency order was used. The difference
should not matter because relocation dependencies could already
reorder link maps in the old code.
The changes to _dl_fini remove the sorting step and replace it with
a traversal of _dl_init_called_list. The l_direct_opencount
decrement outside the loader lock is removed because it appears
incorrect: the counter manipulation could race with other dynamic
loader operations.
tst-audit23 needs adjustments to the changes in LA_ACT_DELETE
notifications. The new approach for checking la_activity should
make it clearer that la_activty calls come in pairs around namespace
updates.
The dependency sorting test cases need updates because the destructor
order is always the opposite order of constructor order, even with
relocation dependencies or cycles present.
There is a future cleanup opportunity to remove the now-constant
force_first and for_fini arguments from the _dl_sort_maps function.
Fixes commit 1df71d32fe5f5905ffd5d100e5e9ca8ad62 ("elf: Implement
force_first handling in _dl_sort_maps_dfs (bug 28937)").
Reviewed-by: DJ Delorie <dj@redhat.com>
(cherry picked from commit 6985865bc3ad5b23147ee73466583dd7fdf65892)
Success is reported with a 0 return value, and failure is -1.
Enhance the kitchen sink test elf/tst-audit28 to cover
_dl_find_object as well.
Fixes commit 5d28a8962dcb ("elf: Add _dl_find_object function")
and bug 30515.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 1bcfe0f732066ae5336b252295591ebe7e51c301)
For architecture with default 64 bit time_t support, the kernel
does not provide LFS and non-LFS values for F_GETLK, F_GETLK, and
F_GETLK (the default value used for 64 bit architecture are used).
This is might be considered an ABI break, but the currenct exported
values is bogus anyway.
The POSIX lockf is not affected since it is aliased to lockf64,
which already uses the LFS values.
Checked on i686-linux-gnu and the new tests on a riscv32.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 4d0fe291aed3a476a3b59c4ecfae9d35ac0f15e8)
V2 of this patch fixes an issue in V1, where the state was changed to ON not
OFF at end of _mcleanup. I hadn't noticed that (counterintuitively) ON=0 and
OFF=3, hence zeroing the buffer turned it back on. So set the state to OFF
after the memset.
1. Prevent double free, and reads from unallocated memory, when
_mcleanup is (incorrectly) called two or more times in a row,
without an intervening call to __monstartup; with this patch, the
second and subsequent calls effectively become no-ops instead.
While setting tos=NULL is minimal fix, safest action is to zero the
whole gmonparam buffer.
2. Prevent memory leak when __monstartup is (incorrectly) called two
or more times in a row, without an intervening call to _mcleanup;
with this patch, the second and subsequent calls effectively become
no-ops instead.
3. After _mcleanup, treat __moncontrol(1) as __moncontrol(0) instead.
With zeroing of gmonparam buffer in _mcleanup, this stops the
state incorrectly being changed to GMON_PROF_ON despite profiling
actually being off. If we'd just done the minimal fix to _mcleanup
of setting tos=NULL, there is risk of far worse memory corruption:
kcount would point to deallocated memory, and the __profil syscall
would make the kernel write profiling data into that memory,
which could have since been reallocated to something unrelated.
4. Ensure __moncontrol(0) still turns off profiling even in error
state. Otherwise, if mcount overflows and sets state to
GMON_PROF_ERROR, when _mcleanup calls __moncontrol(0), the __profil
syscall to disable profiling will not be invoked. _mcleanup will
free the buffer, but the kernel will still be writing profiling
data into it, potentially corrupted arbitrary memory.
Also adds a test case for (1). Issues (2)-(4) are not feasible to test.
Signed-off-by: Simon Kissane <skissane@gmail.com>
Reviewed-by: DJ Delorie <dj@redhat.com>
(cherry picked from commit bde121872001d8f3224eeafa5b7effb871c3fbca)
When mcount overflows, no gmon.out file is generated, but no message is printed
to the user, leaving the user with no idea why, and thinking maybe there is
some bug - which is how BZ 27576 ended up being logged. Print a message to
stderr in this case so the user knows what is going on.
As a comment in sys/gmon.h acknowledges, the hardcoded MAXARCS value is too
small for some large applications, including the test case in that BZ. Rather
than increase it, add tunables to enable MINARCS and MAXARCS to be overridden
at runtime (glibc.gmon.minarcs and glibc.gmon.maxarcs). So if a user gets the
mcount overflow error, they can try increasing maxarcs (they might need to
increase minarcs too if the heuristic is wrong in their case.)
Note setting minarcs/maxarcs too large can cause monstartup to fail with an
out of memory error. If you set them large enough, it can cause an integer
overflow in calculating the buffer size. I haven't done anything to defend
against that - it would not generally be a security vulnerability, since these
tunables will be ignored in suid/sgid programs (due to the SXID_ERASE default),
and if you can set GLIBC_TUNABLES in the environment of a process, you can take
it over anyway (LD_PRELOAD, LD_LIBRARY_PATH, etc). I thought about modifying
the code of monstartup to defend against integer overflows, but doing so is
complicated, and I realise the existing code is susceptible to them even prior
to this change (e.g. try passing a pathologically large highpc argument to
monstartup), so I decided just to leave that possibility in-place.
Add a test case which demonstrates mcount overflow and the tunables.
Document the new tunables in the manual.
Signed-off-by: Simon Kissane <skissane@gmail.com>
Reviewed-by: DJ Delorie <dj@redhat.com>
(cherry picked from commit 31be941e4367c001b2009308839db5c67bf9dcbc)
The `__monstartup()` allocates a buffer used to store all the data
accumulated by the monitor.
The size of this buffer depends on the size of the internal structures
used and the address range for which the monitor is activated, as well
as on the maximum density of call instructions and/or callable functions
that could be potentially on a segment of executable code.
In particular a hash table of arcs is placed at the end of this buffer.
The size of this hash table is calculated in bytes as
p->fromssize = p->textsize / HASHFRACTION;
but actually should be
p->fromssize = ROUNDUP(p->textsize / HASHFRACTION, sizeof(*p->froms));
This results in writing beyond the end of the allocated buffer when an
added arc corresponds to a call near from the end of the monitored
address range, since `_mcount()` check the incoming caller address for
monitored range but not the intermediate result hash-like index that
uses to write into the table.
It should be noted that when the results are output to `gmon.out`, the
table is read to the last element calculated from the allocated size in
bytes, so the arcs stored outside the buffer boundary did not fall into
`gprof` for analysis. Thus this "feature" help me to found this bug
during working with https://sourceware.org/bugzilla/show_bug.cgi?id=29438
Just in case, I will explicitly note that the problem breaks the
`make test t=gmon/tst-gmon-dso` added for Bug 29438.
There, the arc of the `f3()` call disappears from the output, since in
the DSO case, the call to `f3` is located close to the end of the
monitored range.
Signed-off-by: Леонид Юрьев (Leonid Yuriev) <leo@yuriev.ru>
Another minor error seems a related typo in the calculation of
`kcountsize`, but since kcounts are smaller than froms, this is
actually to align the p->froms data.
Co-authored-by: DJ Delorie <dj@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 801af9fafd4689337ebf27260aa115335a0cb2bc)
Fix bug that SIGCHLD is erroneously blocked forever in the following
scenario:
1. Thread A calls system but hasn't returned yet
2. Thread B calls another system but returns
SIGCHLD would be blocked forever in thread B after its system() returns,
even after the system() in thread A returns.
Although POSIX does not require, glibc system implementation aims to be
thread and cancellation safe. This bug was introduced in
5fb7fc96350575c9adb1316833e48ca11553be49 when we moved reverting signal
mask to happen when the last concurrently running system returns,
despite that signal mask is per thread. This commit reverts this logic
and adds a test.
Signed-off-by: Adam Yi <ayi@janestreet.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 436a604b7dc741fc76b5a6704c6cd8bb178518e7)
The divss instruction clobbers its first argument, and the constraints
need to reflect that. Fortunately, with GCC 12, generated code does
not actually change, so there is no externally visible bug.
Suggested-by: Jakub Jelinek <jakub@redhat.com>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
(cherry picked from commit 5d1ccdda7b0c625751661d50977f3dfbc73f8eae)
Before this change, sgetsgent_r did not set errno to ERANGE, but
sgetsgent only check errno, not the return value from sgetsgent_r.
Consequently, sgetsgent did not detect any error, and reported
success to the caller, without initializing the struct sgrp object
whose address was returned.
This commit changes sgetsgent_r to set errno as well. This avoids
similar issues in applications which only change errno.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
(cherry picked from commit 969e9733c7d17edf1e239a73fa172f357561f440)
The 73fc4e28b9464f0e refactor did not add the GL(dl_phdr) and
GL(dl_phnum) for static build, relying on the __ehdr_start symbol,
which is always added by the static linker, to get the correct values.
This is problematic in some ways:
- The segment may see its in-memory size differ from its in-file
size (or the binary may have holes). The Linux has fixed is to
provide concise values for both AT_PHDR and AT_PHNUM (commit
0da1d5002745c - "fs/binfmt_elf: Fix AT_PHDR for unusual ELF files")
- Some archs (alpha for instance) the hidden weak reference is not
correctly pulled by the static linker and __ehdr_start address
end up being 0, which makes GL(dl_phdr) and GL(dl_phnum) have both
invalid values (and triggering a segfault later on libc.so while
accessing TLS variables).
The safer fix is to just restore the previous behavior to setup
GL(dl_phdr) and GL(dl_phnum) for static based on kernel auxv. The
__ehdr_start fallback can also be simplified by not assuming weak
linkage (as for PIE).
The libc-static.c auxv init logic is moved to dl-support.c, since
the later is build without SHARED and then GLRO macro is defined
to access the variables directly.
The _dl_phdr is also assumed to be always non NULL, since an invalid
NULL values does not trigger TLS initialization (which is used in
various libc systems).
Checked on aarch64-linux-gnu, x86_64-linux-gnu, and i686-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit 7e31d166510ac4adbf53d5e8144c709a37dd8c7a)
The daylight variable is supposed to be set to 1 if DST is ever in
use for the current time zone. But __tzfile_read used to do this:
__daylight = rule_stdoff != rule_dstoff;
This check can fail to set __daylight to 1 if the DST and non-DST
offsets happen to be the same.
(cherry picked from commit 35141f304e319109c322f797ae71c0b9420ccb05)
Supports pcrel addressing of TLS GOT entry. Also tweak the non-pcrel
asm constraint to better reflect how the reg is used.
(cherry picked from commit 94628de77888c3292fc103840731ff85f283368e)
The compiler might transform __stpcpy calls (which are routed to
__builtin_stpcpy as an optimization) to strcpy and x86_64 strcpy
multiarch implementation does not build any working symbol due
ISA_SHOULD_BUILD not being evaluated for IS_IN(rtld).
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 9dc4e29f630c6ef8299120b275e503321dc0c8c7)
Although the nscd module is built with 64 bit time_t, the routines
linked direct to libc.so need to use the internal symbols.
Reviewed-by: DJ Delorie <dj@redhat.com>
(cherry picked from commit fa4a19277842fd09a4815a986f70e0fe0903836f)
Old applications pass __IPC_64 as part of the command argument because
old glibc did not check for unknown commands, and passed through the
arguments directly to the kernel, without adding __IPC_64.
Applications need to continue doing that for old glibc compatibility,
so this commit enables this approach in current glibc.
For msgctl and shmctl, if no translation is required, make
direct system calls, as we did before the time64 changes. If
translation is required, mask __IPC_64 from the command argument.
For semctl, the union-in-vararg argument handling means that
translation is needed on all architectures.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 22a46dee24351fd5f4f188ad80554cad79c82524)
Commit 6e8a0aac2f883 ("time: Fix overflow itimer tests on 32-bit
systems") changed in_time_t_range to assume a 32-bit time_t. This broke
fstatat on MIPSn64 that was using it with a 64-bit time_t due to
difference between stat and stat64. This commit fix that by adding a
MIPSn64 specific version, which bypasses the EOVERFLOW tests.
Resolves: BZ #29730
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 7457b7eef8dfe8cc48e55b9f9837df6dd397b80d)
The generic Linux struct_stat misses the conditionals to use
bits/struct_stat_time64_helper.h in the __USE_TIME_BITS64 for
architecture that uses __TIMESIZE == 32 (currently csky and nios2).
Since newer ports should not support 32 bit time_t, the generic
implementation should be used as default.
For arm, hppa, and sh a copy of default struct_stat is added,
while for csky and nios a new one based on generic is used, along
with conditionals to use bits/struct_stat_time64_helper.h.
The default struct_stat is also replaced with the generic one.
Checked on aarch64-linux-gnu and arm-linux-gnueabihf.
(cherry picked from commit 7a6ca82f8007ddbd43e2b8fce806ba7101ee47f5)
Detecting an overflow edge case depended on signed overflow of a long
long. Replace the additions and the overflow checks by
__builtin_add_overflow().
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
(cherry picked from commit 2b5478569e72ee4820a6e163d306690c9c0eaf5e)
The data in the _ns_debug member must be preserved, otherwise
_dl_debug_initialize enters an infinite loop. To be conservative,
only clear the libc_map member for now, to fix bug 29528.
Fixes commit d0e357ff45a75553dee3b17ed7d303bfa544f6fe
("elf: Call __libc_early_init for reused namespaces (bug 29528)"),
by reverting most of it.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 2c42257314536b94cc8d52edede86e94e98c1436)
getent implicitly passes AI_ADDRCONFIG to getaddrinfo by default.
Use --no-addrconfig to suppress that, so that both IPv4 and IPv6
lookups succeed even if the address family is not supported by the
host.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit c75d20b5b27b0a60f0678236f51a4d3b0b058c00)
The ahosts, ahostsv4, ahostsv6 commands unconditionally pass
AI_ADDRCONFIG to getaddrinfo, which is not always desired.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit a623f13adfac47c8634a7288e08f821a846bc650)
math/test-float128-y1 fails on x86_64 and ppc64el with gcc 12 and -O3,
because code inside a block guarded by SET_RESTORE_ROUNDL is being moved
after the rounding mode has been restored. Use math_force_eval to
prevent this (and insert some math_opt_barrier calls to prevent code
from being moved before the rounding mode is set).
Fixes#29463
Reviewed-By: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
(cherry picked from commit 2b274fd8c9c776cf70fcdb8356e678ada522a7b0)
When a request needs to be resent (e.g. due to insufficient buffer
space), the references to subsequent tuples in the local variable are
stale and should not be used. This used to work by accident before, but
since 1d495912a it no longer does. Instead of trying to reset it, just
let gethostbyname4_r write into TUMPBUF6 for us, thus maintaining a
consistent state at all times. This is now consistent with what is done
in gaih_inet for getaddrinfo.
Resolves: BZ #29607
Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 6e33e5c4b73cea7b8aa3de0947123db16200fb65)
Using an unsigned type prevents the fallback to be used if kernel
does not support getrandom syscall.
Checked on x86_64-linux-gnu.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
(cherry picked from commit 13db9ee2cb3b77e25f852be7d6952882e1be6f00)
A new internal definition, __LIBC_LOCK_ALIGNMENT, is used to force
the 4-byte alignment only for m68k, other architecture keep the
natural alignment of the type used internally (and hppa does not
require 16-byte alignment for kernel-assisted CAS).
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit aeb4d2e9815d459e2640a31f5abb8ef803830107)
It's possible that inode numbers are outside the 32-bit range.
The existing code only handles the in-libc case correctly, and
still uses the legacy interfaces when building iconv.
Suggested-by: Helge Deller <deller@gmx.de>
(cherry picked from commit f97905f24631097af325d6a231093071c3077a5f)
The implementation in _dl_close_worker requires that the first
element of l_initfini is always this very map (“We are always the
zeroth entry, and since we don't include ourselves in the
dependency analysis start at 1.”). Rather than fixing that
assumption, this commit adds an implementation of the force_first
argument to the new dependency sorting algorithm. This also means
that the directly dlopen'ed shared object is always initialized last,
which is the least surprising behavior in the presence of cycles.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 1df71d32fe5f5905ffd5d100e5e9ca8ad6210891)
Processes cache network interface information such as whether IPv4 or IPv6
are enabled. This is only checked again if the "netlink timestamp" provided
by nscd changed, which is triggered by netlink socket activity.
However, in the epoll handler for the netlink socket, it was missed to
assign the new timestamp to the nscd database. The handler for plain poll
did that properly, copy that over.
This bug caused that e.g. processes which started before network
configuration got unusuable addresses from getaddrinfo, like IPv6 only even
though only IPv4 is available:
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/issues/1041
It's a bit hard to reproduce, so I verified this by checking the timestamp
on calls to __check_pf manually. Without this patch it's stuck at 1, now
it's increasing on network changes as expected.
Signed-off-by: Fabian Vogt <fvogt@suse.de>
(cherry picked from commit 02ca25fef2785974011e9c5beecc99b900b69fd7)
