mirror of
git://sourceware.org/git/glibc.git
synced 2024-11-21 01:12:26 +08:00
x86-64: Use fxsave/xsave/xsavec in _dl_runtime_resolve [BZ #21265]
In _dl_runtime_resolve, use fxsave/xsave/xsavec to preserve all vector,
mask and bound registers. It simplifies _dl_runtime_resolve and supports
different calling conventions. ld.so code size is reduced by more than
1 KB. However, use fxsave/xsave/xsavec takes a little bit more cycles
than saving and restoring vector and bound registers individually.
Latency for _dl_runtime_resolve to lookup the function, foo, from one
shared library plus libc.so:
Before After Change
Westmere (SSE)/fxsave 345 866 151%
IvyBridge (AVX)/xsave 420 643 53%
Haswell (AVX)/xsave 713 1252 75%
Skylake (AVX+MPX)/xsavec 559 719 28%
Skylake (AVX512+MPX)/xsavec 145 272 87%
Ryzen (AVX)/xsavec 280 553 97%
This is the worst case where portion of time spent for saving and
restoring registers is bigger than majority of cases. With smaller
_dl_runtime_resolve code size, overall performance impact is negligible.
On IvyBridge, differences in build and test time of binutils with lazy
binding GCC and binutils are noises. On Westmere, differences in
bootstrap and "makc check" time of GCC 7 with lazy binding GCC and
binutils are also noises.
[BZ #21265]
* sysdeps/x86/cpu-features-offsets.sym (XSAVE_STATE_SIZE_OFFSET):
New.
* sysdeps/x86/cpu-features.c: Include <libc-pointer-arith.h>.
(get_common_indeces): Set xsave_state_size, xsave_state_full_size
and bit_arch_XSAVEC_Usable if needed.
(init_cpu_features): Remove bit_arch_Use_dl_runtime_resolve_slow
and bit_arch_Use_dl_runtime_resolve_opt.
* sysdeps/x86/cpu-features.h (bit_arch_Use_dl_runtime_resolve_opt):
Removed.
(bit_arch_Use_dl_runtime_resolve_slow): Likewise.
(bit_arch_Prefer_No_AVX512): Updated.
(bit_arch_MathVec_Prefer_No_AVX512): Likewise.
(bit_arch_XSAVEC_Usable): New.
(STATE_SAVE_OFFSET): Likewise.
(STATE_SAVE_MASK): Likewise.
[__ASSEMBLER__]: Include <cpu-features-offsets.h>.
(cpu_features): Add xsave_state_size and xsave_state_full_size.
(index_arch_Use_dl_runtime_resolve_opt): Removed.
(index_arch_Use_dl_runtime_resolve_slow): Likewise.
(index_arch_XSAVEC_Usable): New.
* sysdeps/x86/cpu-tunables.c (TUNABLE_CALLBACK (set_hwcaps)):
Support XSAVEC_Usable. Remove Use_dl_runtime_resolve_slow.
* sysdeps/x86_64/Makefile (tst-x86_64-1-ENV): New if tunables
is enabled.
* sysdeps/x86_64/dl-machine.h (elf_machine_runtime_setup):
Replace _dl_runtime_resolve_sse, _dl_runtime_resolve_avx,
_dl_runtime_resolve_avx_slow, _dl_runtime_resolve_avx_opt,
_dl_runtime_resolve_avx512 and _dl_runtime_resolve_avx512_opt
with _dl_runtime_resolve_fxsave, _dl_runtime_resolve_xsave and
_dl_runtime_resolve_xsavec.
* sysdeps/x86_64/dl-trampoline.S (DL_RUNTIME_UNALIGNED_VEC_SIZE):
Removed.
(DL_RUNTIME_RESOLVE_REALIGN_STACK): Check STATE_SAVE_ALIGNMENT
instead of VEC_SIZE.
(REGISTER_SAVE_BND0): Removed.
(REGISTER_SAVE_BND1): Likewise.
(REGISTER_SAVE_BND3): Likewise.
(REGISTER_SAVE_RAX): Always defined to 0.
(VMOV): Removed.
(_dl_runtime_resolve_avx): Likewise.
(_dl_runtime_resolve_avx_slow): Likewise.
(_dl_runtime_resolve_avx_opt): Likewise.
(_dl_runtime_resolve_avx512): Likewise.
(_dl_runtime_resolve_avx512_opt): Likewise.
(_dl_runtime_resolve_sse): Likewise.
(_dl_runtime_resolve_sse_vex): Likewise.
(USE_FXSAVE): New.
(_dl_runtime_resolve_fxsave): Likewise.
(USE_XSAVE): Likewise.
(_dl_runtime_resolve_xsave): Likewise.
(USE_XSAVEC): Likewise.
(_dl_runtime_resolve_xsavec): Likewise.
* sysdeps/x86_64/dl-trampoline.h (_dl_runtime_resolve_avx512):
Removed.
(_dl_runtime_resolve_avx512_opt): Likewise.
(_dl_runtime_resolve_avx): Likewise.
(_dl_runtime_resolve_avx_opt): Likewise.
(_dl_runtime_resolve_sse): Likewise.
(_dl_runtime_resolve_sse_vex): Likewise.
(_dl_runtime_resolve_fxsave): New.
(_dl_runtime_resolve_xsave): Likewise.
(_dl_runtime_resolve_xsavec): Likewise.
This commit is contained in:
H.J. Lu
parent
822f523b29
commit
b52b0d793d
66
ChangeLog
66
ChangeLog
@ -1,3 +1,69 @@
|
||||
2017-10-20 H.J. Lu <hongjiu.lu@intel.com>
|
||||
|
||||
[BZ #21265]
|
||||
* sysdeps/x86/cpu-features-offsets.sym (XSAVE_STATE_SIZE_OFFSET):
|
||||
New.
|
||||
* sysdeps/x86/cpu-features.c: Include <libc-pointer-arith.h>.
|
||||
(get_common_indeces): Set xsave_state_size, xsave_state_full_size
|
||||
and bit_arch_XSAVEC_Usable if needed.
|
||||
(init_cpu_features): Remove bit_arch_Use_dl_runtime_resolve_slow
|
||||
and bit_arch_Use_dl_runtime_resolve_opt.
|
||||
* sysdeps/x86/cpu-features.h (bit_arch_Use_dl_runtime_resolve_opt):
|
||||
Removed.
|
||||
(bit_arch_Use_dl_runtime_resolve_slow): Likewise.
|
||||
(bit_arch_Prefer_No_AVX512): Updated.
|
||||
(bit_arch_MathVec_Prefer_No_AVX512): Likewise.
|
||||
(bit_arch_XSAVEC_Usable): New.
|
||||
(STATE_SAVE_OFFSET): Likewise.
|
||||
(STATE_SAVE_MASK): Likewise.
|
||||
[__ASSEMBLER__]: Include <cpu-features-offsets.h>.
|
||||
(cpu_features): Add xsave_state_size and xsave_state_full_size.
|
||||
(index_arch_Use_dl_runtime_resolve_opt): Removed.
|
||||
(index_arch_Use_dl_runtime_resolve_slow): Likewise.
|
||||
(index_arch_XSAVEC_Usable): New.
|
||||
* sysdeps/x86/cpu-tunables.c (TUNABLE_CALLBACK (set_hwcaps)):
|
||||
Support XSAVEC_Usable. Remove Use_dl_runtime_resolve_slow.
|
||||
* sysdeps/x86_64/Makefile (tst-x86_64-1-ENV): New if tunables
|
||||
is enabled.
|
||||
* sysdeps/x86_64/dl-machine.h (elf_machine_runtime_setup):
|
||||
Replace _dl_runtime_resolve_sse, _dl_runtime_resolve_avx,
|
||||
_dl_runtime_resolve_avx_slow, _dl_runtime_resolve_avx_opt,
|
||||
_dl_runtime_resolve_avx512 and _dl_runtime_resolve_avx512_opt
|
||||
with _dl_runtime_resolve_fxsave, _dl_runtime_resolve_xsave and
|
||||
_dl_runtime_resolve_xsavec.
|
||||
* sysdeps/x86_64/dl-trampoline.S (DL_RUNTIME_UNALIGNED_VEC_SIZE):
|
||||
Removed.
|
||||
(DL_RUNTIME_RESOLVE_REALIGN_STACK): Check STATE_SAVE_ALIGNMENT
|
||||
instead of VEC_SIZE.
|
||||
(REGISTER_SAVE_BND0): Removed.
|
||||
(REGISTER_SAVE_BND1): Likewise.
|
||||
(REGISTER_SAVE_BND3): Likewise.
|
||||
(REGISTER_SAVE_RAX): Always defined to 0.
|
||||
(VMOV): Removed.
|
||||
(_dl_runtime_resolve_avx): Likewise.
|
||||
(_dl_runtime_resolve_avx_slow): Likewise.
|
||||
(_dl_runtime_resolve_avx_opt): Likewise.
|
||||
(_dl_runtime_resolve_avx512): Likewise.
|
||||
(_dl_runtime_resolve_avx512_opt): Likewise.
|
||||
(_dl_runtime_resolve_sse): Likewise.
|
||||
(_dl_runtime_resolve_sse_vex): Likewise.
|
||||
(USE_FXSAVE): New.
|
||||
(_dl_runtime_resolve_fxsave): Likewise.
|
||||
(USE_XSAVE): Likewise.
|
||||
(_dl_runtime_resolve_xsave): Likewise.
|
||||
(USE_XSAVEC): Likewise.
|
||||
(_dl_runtime_resolve_xsavec): Likewise.
|
||||
* sysdeps/x86_64/dl-trampoline.h (_dl_runtime_resolve_avx512):
|
||||
Removed.
|
||||
(_dl_runtime_resolve_avx512_opt): Likewise.
|
||||
(_dl_runtime_resolve_avx): Likewise.
|
||||
(_dl_runtime_resolve_avx_opt): Likewise.
|
||||
(_dl_runtime_resolve_sse): Likewise.
|
||||
(_dl_runtime_resolve_sse_vex): Likewise.
|
||||
(_dl_runtime_resolve_fxsave): New.
|
||||
(_dl_runtime_resolve_xsave): Likewise.
|
||||
(_dl_runtime_resolve_xsavec): Likewise.
|
||||
|
||||
2017-10-20 Paul Eggert <eggert@cs.ucla.edu>
|
||||
|
||||
[BZ #22320]
|
||||
|
||||
@ -15,6 +15,7 @@ CPUID_ECX_OFFSET offsetof (struct cpuid_registers, ecx)
|
||||
CPUID_EDX_OFFSET offsetof (struct cpuid_registers, edx)
|
||||
FAMILY_OFFSET offsetof (struct cpu_features, family)
|
||||
MODEL_OFFSET offsetof (struct cpu_features, model)
|
||||
XSAVE_STATE_SIZE_OFFSET offsetof (struct cpu_features, xsave_state_size)
|
||||
FEATURE_OFFSET offsetof (struct cpu_features, feature)
|
||||
FEATURE_SIZE sizeof (unsigned int)
|
||||
|
||||
|
||||
@ -19,6 +19,7 @@
|
||||
#include <cpuid.h>
|
||||
#include <cpu-features.h>
|
||||
#include <dl-hwcap.h>
|
||||
#include <libc-pointer-arith.h>
|
||||
|
||||
#if HAVE_TUNABLES
|
||||
# define TUNABLE_NAMESPACE tune
|
||||
@ -103,6 +104,76 @@ get_common_indeces (struct cpu_features *cpu_features,
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/* For _dl_runtime_resolve, set xsave_state_size to xsave area
|
||||
size + integer register save size and align it to 64 bytes. */
|
||||
if (cpu_features->max_cpuid >= 0xd)
|
||||
{
|
||||
unsigned int eax, ebx, ecx, edx;
|
||||
|
||||
__cpuid_count (0xd, 0, eax, ebx, ecx, edx);
|
||||
if (ebx != 0)
|
||||
{
|
||||
unsigned int xsave_state_full_size
|
||||
= ALIGN_UP (ebx + STATE_SAVE_OFFSET, 64);
|
||||
|
||||
cpu_features->xsave_state_size
|
||||
= xsave_state_full_size;
|
||||
cpu_features->xsave_state_full_size
|
||||
= xsave_state_full_size;
|
||||
|
||||
__cpuid_count (0xd, 1, eax, ebx, ecx, edx);
|
||||
|
||||
/* Check if XSAVEC is available. */
|
||||
if ((eax & (1 << 1)) != 0)
|
||||
{
|
||||
unsigned int xstate_comp_offsets[32];
|
||||
unsigned int xstate_comp_sizes[32];
|
||||
unsigned int i;
|
||||
|
||||
xstate_comp_offsets[0] = 0;
|
||||
xstate_comp_offsets[1] = 160;
|
||||
xstate_comp_offsets[2] = 576;
|
||||
xstate_comp_sizes[0] = 160;
|
||||
xstate_comp_sizes[1] = 256;
|
||||
|
||||
for (i = 2; i < 32; i++)
|
||||
{
|
||||
if ((STATE_SAVE_MASK & (1 << i)) != 0)
|
||||
{
|
||||
__cpuid_count (0xd, i, eax, ebx, ecx, edx);
|
||||
xstate_comp_sizes[i] = eax;
|
||||
}
|
||||
else
|
||||
{
|
||||
ecx = 0;
|
||||
xstate_comp_sizes[i] = 0;
|
||||
}
|
||||
|
||||
if (i > 2)
|
||||
{
|
||||
xstate_comp_offsets[i]
|
||||
= (xstate_comp_offsets[i - 1]
|
||||
+ xstate_comp_sizes[i -1]);
|
||||
if ((ecx & (1 << 1)) != 0)
|
||||
xstate_comp_offsets[i]
|
||||
= ALIGN_UP (xstate_comp_offsets[i], 64);
|
||||
}
|
||||
}
|
||||
|
||||
/* Use XSAVEC. */
|
||||
unsigned int size
|
||||
= xstate_comp_offsets[31] + xstate_comp_sizes[31];
|
||||
if (size)
|
||||
{
|
||||
cpu_features->xsave_state_size
|
||||
= ALIGN_UP (size + STATE_SAVE_OFFSET, 64);
|
||||
cpu_features->feature[index_arch_XSAVEC_Usable]
|
||||
|= bit_arch_XSAVEC_Usable;
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
@ -242,23 +313,6 @@ init_cpu_features (struct cpu_features *cpu_features)
|
||||
else
|
||||
cpu_features->feature[index_arch_Prefer_No_AVX512]
|
||||
|= bit_arch_Prefer_No_AVX512;
|
||||
|
||||
/* To avoid SSE transition penalty, use _dl_runtime_resolve_slow.
|
||||
If XGETBV suports ECX == 1, use _dl_runtime_resolve_opt.
|
||||
Use _dl_runtime_resolve_opt only with AVX512F since it is
|
||||
slower than _dl_runtime_resolve_slow with AVX. */
|
||||
cpu_features->feature[index_arch_Use_dl_runtime_resolve_slow]
|
||||
|= bit_arch_Use_dl_runtime_resolve_slow;
|
||||
if (CPU_FEATURES_ARCH_P (cpu_features, AVX512F_Usable)
|
||||
&& cpu_features->max_cpuid >= 0xd)
|
||||
{
|
||||
unsigned int eax;
|
||||
|
||||
__cpuid_count (0xd, 1, eax, ebx, ecx, edx);
|
||||
if ((eax & (1 << 2)) != 0)
|
||||
cpu_features->feature[index_arch_Use_dl_runtime_resolve_opt]
|
||||
|= bit_arch_Use_dl_runtime_resolve_opt;
|
||||
}
|
||||
}
|
||||
/* This spells out "AuthenticAMD". */
|
||||
else if (ebx == 0x68747541 && ecx == 0x444d4163 && edx == 0x69746e65)
|
||||
|
||||
@ -37,10 +37,9 @@
|
||||
#define bit_arch_Prefer_No_VZEROUPPER (1 << 17)
|
||||
#define bit_arch_Fast_Unaligned_Copy (1 << 18)
|
||||
#define bit_arch_Prefer_ERMS (1 << 19)
|
||||
#define bit_arch_Use_dl_runtime_resolve_opt (1 << 20)
|
||||
#define bit_arch_Use_dl_runtime_resolve_slow (1 << 21)
|
||||
#define bit_arch_Prefer_No_AVX512 (1 << 22)
|
||||
#define bit_arch_MathVec_Prefer_No_AVX512 (1 << 23)
|
||||
#define bit_arch_Prefer_No_AVX512 (1 << 20)
|
||||
#define bit_arch_MathVec_Prefer_No_AVX512 (1 << 21)
|
||||
#define bit_arch_XSAVEC_Usable (1 << 22)
|
||||
|
||||
/* CPUID Feature flags. */
|
||||
|
||||
@ -91,8 +90,18 @@
|
||||
/* The current maximum size of the feature integer bit array. */
|
||||
#define FEATURE_INDEX_MAX 1
|
||||
|
||||
#ifndef __ASSEMBLER__
|
||||
/* Offset for fxsave/xsave area used by _dl_runtime_resolve. Also need
|
||||
space to preserve RCX, RDX, RSI, RDI, R8, R9 and RAX. It must be
|
||||
aligned to 16 bytes for fxsave and 64 bytes for xsave. */
|
||||
#define STATE_SAVE_OFFSET (8 * 7 + 8)
|
||||
|
||||
/* Save SSE, AVX, AVX512, mask and bound registers. */
|
||||
#define STATE_SAVE_MASK \
|
||||
((1 << 1) | (1 << 2) | (1 << 3) | (1 << 5) | (1 << 6) | (1 << 7))
|
||||
|
||||
#ifdef __ASSEMBLER__
|
||||
# include <cpu-features-offsets.h>
|
||||
#else /* __ASSEMBLER__ */
|
||||
enum
|
||||
{
|
||||
COMMON_CPUID_INDEX_1 = 0,
|
||||
@ -121,6 +130,18 @@ struct cpu_features
|
||||
} cpuid[COMMON_CPUID_INDEX_MAX];
|
||||
unsigned int family;
|
||||
unsigned int model;
|
||||
/* The state size for XSAVEC or XSAVE. The type must be unsigned long
|
||||
int so that we use
|
||||
|
||||
sub xsave_state_size_offset(%rip) %RSP_LP
|
||||
|
||||
in _dl_runtime_resolve. */
|
||||
unsigned long int xsave_state_size;
|
||||
/* The full state size for XSAVE when XSAVEC is disabled by
|
||||
|
||||
GLIBC_TUNABLES=glibc.tune.hwcaps=-XSAVEC_Usable
|
||||
*/
|
||||
unsigned int xsave_state_full_size;
|
||||
unsigned int feature[FEATURE_INDEX_MAX];
|
||||
/* Data cache size for use in memory and string routines, typically
|
||||
L1 size. */
|
||||
@ -237,10 +258,9 @@ extern const struct cpu_features *__get_cpu_features (void)
|
||||
# define index_arch_Prefer_No_VZEROUPPER FEATURE_INDEX_1
|
||||
# define index_arch_Fast_Unaligned_Copy FEATURE_INDEX_1
|
||||
# define index_arch_Prefer_ERMS FEATURE_INDEX_1
|
||||
# define index_arch_Use_dl_runtime_resolve_opt FEATURE_INDEX_1
|
||||
# define index_arch_Use_dl_runtime_resolve_slow FEATURE_INDEX_1
|
||||
# define index_arch_Prefer_No_AVX512 FEATURE_INDEX_1
|
||||
# define index_arch_MathVec_Prefer_No_AVX512 FEATURE_INDEX_1
|
||||
# define index_arch_XSAVEC_Usable FEATURE_INDEX_1
|
||||
|
||||
#endif /* !__ASSEMBLER__ */
|
||||
|
||||
|
||||
@ -242,6 +242,16 @@ TUNABLE_CALLBACK (set_hwcaps) (tunable_val_t *valp)
|
||||
Slow_SSE4_2, SSE4_2,
|
||||
disable, 11);
|
||||
break;
|
||||
case 13:
|
||||
if (disable)
|
||||
{
|
||||
/* Update xsave_state_size to XSAVE state size. */
|
||||
cpu_features->xsave_state_size
|
||||
= cpu_features->xsave_state_full_size;
|
||||
CHECK_GLIBC_IFUNC_ARCH_OFF (n, cpu_features,
|
||||
XSAVEC_Usable, 13);
|
||||
}
|
||||
break;
|
||||
case 14:
|
||||
if (disable)
|
||||
{
|
||||
@ -317,13 +327,6 @@ TUNABLE_CALLBACK (set_hwcaps) (tunable_val_t *valp)
|
||||
disable, 26);
|
||||
}
|
||||
break;
|
||||
case 27:
|
||||
{
|
||||
CHECK_GLIBC_IFUNC_ARCH_BOTH (n, cpu_features,
|
||||
Use_dl_runtime_resolve_slow,
|
||||
disable, 27);
|
||||
}
|
||||
break;
|
||||
}
|
||||
p += len + 1;
|
||||
}
|
||||
|
||||
@ -55,6 +55,10 @@ CFLAGS-tst-quad2pie.c = $(PIE-ccflag)
|
||||
tests += tst-x86_64-1
|
||||
modules-names += x86_64/tst-x86_64mod-1
|
||||
LDFLAGS-tst-x86_64mod-1.so = -Wl,-soname,tst-x86_64mod-1.so
|
||||
ifneq (no,$(have-tunables))
|
||||
# Test the state size for XSAVE when XSAVEC is disabled.
|
||||
tst-x86_64-1-ENV = GLIBC_TUNABLES=glibc.tune.hwcaps=-XSAVEC_Usable
|
||||
endif
|
||||
|
||||
$(objpfx)tst-x86_64-1: $(objpfx)x86_64/tst-x86_64mod-1.so
|
||||
|
||||
|
||||
@ -66,12 +66,9 @@ static inline int __attribute__ ((unused, always_inline))
|
||||
elf_machine_runtime_setup (struct link_map *l, int lazy, int profile)
|
||||
{
|
||||
Elf64_Addr *got;
|
||||
extern void _dl_runtime_resolve_sse (ElfW(Word)) attribute_hidden;
|
||||
extern void _dl_runtime_resolve_avx (ElfW(Word)) attribute_hidden;
|
||||
extern void _dl_runtime_resolve_avx_slow (ElfW(Word)) attribute_hidden;
|
||||
extern void _dl_runtime_resolve_avx_opt (ElfW(Word)) attribute_hidden;
|
||||
extern void _dl_runtime_resolve_avx512 (ElfW(Word)) attribute_hidden;
|
||||
extern void _dl_runtime_resolve_avx512_opt (ElfW(Word)) attribute_hidden;
|
||||
extern void _dl_runtime_resolve_fxsave (ElfW(Word)) attribute_hidden;
|
||||
extern void _dl_runtime_resolve_xsave (ElfW(Word)) attribute_hidden;
|
||||
extern void _dl_runtime_resolve_xsavec (ElfW(Word)) attribute_hidden;
|
||||
extern void _dl_runtime_profile_sse (ElfW(Word)) attribute_hidden;
|
||||
extern void _dl_runtime_profile_avx (ElfW(Word)) attribute_hidden;
|
||||
extern void _dl_runtime_profile_avx512 (ElfW(Word)) attribute_hidden;
|
||||
@ -120,29 +117,14 @@ elf_machine_runtime_setup (struct link_map *l, int lazy, int profile)
|
||||
/* This function will get called to fix up the GOT entry
|
||||
indicated by the offset on the stack, and then jump to
|
||||
the resolved address. */
|
||||
if (HAS_ARCH_FEATURE (AVX512F_Usable))
|
||||
{
|
||||
if (HAS_ARCH_FEATURE (Use_dl_runtime_resolve_opt))
|
||||
*(ElfW(Addr) *) (got + 2)
|
||||
= (ElfW(Addr)) &_dl_runtime_resolve_avx512_opt;
|
||||
else
|
||||
*(ElfW(Addr) *) (got + 2)
|
||||
= (ElfW(Addr)) &_dl_runtime_resolve_avx512;
|
||||
}
|
||||
else if (HAS_ARCH_FEATURE (AVX_Usable))
|
||||
{
|
||||
if (HAS_ARCH_FEATURE (Use_dl_runtime_resolve_opt))
|
||||
*(ElfW(Addr) *) (got + 2)
|
||||
= (ElfW(Addr)) &_dl_runtime_resolve_avx_opt;
|
||||
else if (HAS_ARCH_FEATURE (Use_dl_runtime_resolve_slow))
|
||||
*(ElfW(Addr) *) (got + 2)
|
||||
= (ElfW(Addr)) &_dl_runtime_resolve_avx_slow;
|
||||
else
|
||||
*(ElfW(Addr) *) (got + 2)
|
||||
= (ElfW(Addr)) &_dl_runtime_resolve_avx;
|
||||
}
|
||||
if (GLRO(dl_x86_cpu_features).xsave_state_size != 0)
|
||||
*(ElfW(Addr) *) (got + 2)
|
||||
= (HAS_ARCH_FEATURE (XSAVEC_Usable)
|
||||
? (ElfW(Addr)) &_dl_runtime_resolve_xsavec
|
||||
: (ElfW(Addr)) &_dl_runtime_resolve_xsave);
|
||||
else
|
||||
*(ElfW(Addr) *) (got + 2) = (ElfW(Addr)) &_dl_runtime_resolve_sse;
|
||||
*(ElfW(Addr) *) (got + 2)
|
||||
= (ElfW(Addr)) &_dl_runtime_resolve_fxsave;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
@ -34,41 +34,24 @@
|
||||
# define DL_STACK_ALIGNMENT 8
|
||||
#endif
|
||||
|
||||
#ifndef DL_RUNTIME_UNALIGNED_VEC_SIZE
|
||||
/* The maximum size in bytes of unaligned vector load and store in the
|
||||
dynamic linker. Since SSE optimized memory/string functions with
|
||||
aligned SSE register load and store are used in the dynamic linker,
|
||||
we must set this to 8 so that _dl_runtime_resolve_sse will align the
|
||||
stack before calling _dl_fixup. */
|
||||
# define DL_RUNTIME_UNALIGNED_VEC_SIZE 8
|
||||
#endif
|
||||
|
||||
/* True if _dl_runtime_resolve should align stack to VEC_SIZE bytes. */
|
||||
/* True if _dl_runtime_resolve should align stack for STATE_SAVE or align
|
||||
stack to 16 bytes before calling _dl_fixup. */
|
||||
#define DL_RUNTIME_RESOLVE_REALIGN_STACK \
|
||||
(VEC_SIZE > DL_STACK_ALIGNMENT \
|
||||
&& VEC_SIZE > DL_RUNTIME_UNALIGNED_VEC_SIZE)
|
||||
|
||||
/* Align vector register save area to 16 bytes. */
|
||||
#define REGISTER_SAVE_VEC_OFF 0
|
||||
(STATE_SAVE_ALIGNMENT > DL_STACK_ALIGNMENT \
|
||||
|| 16 > DL_STACK_ALIGNMENT)
|
||||
|
||||
/* Area on stack to save and restore registers used for parameter
|
||||
passing when calling _dl_fixup. */
|
||||
#ifdef __ILP32__
|
||||
# define REGISTER_SAVE_RAX (REGISTER_SAVE_VEC_OFF + VEC_SIZE * 8)
|
||||
# define PRESERVE_BND_REGS_PREFIX
|
||||
#else
|
||||
/* Align bound register save area to 16 bytes. */
|
||||
# define REGISTER_SAVE_BND0 (REGISTER_SAVE_VEC_OFF + VEC_SIZE * 8)
|
||||
# define REGISTER_SAVE_BND1 (REGISTER_SAVE_BND0 + 16)
|
||||
# define REGISTER_SAVE_BND2 (REGISTER_SAVE_BND1 + 16)
|
||||
# define REGISTER_SAVE_BND3 (REGISTER_SAVE_BND2 + 16)
|
||||
# define REGISTER_SAVE_RAX (REGISTER_SAVE_BND3 + 16)
|
||||
# ifdef HAVE_MPX_SUPPORT
|
||||
# define PRESERVE_BND_REGS_PREFIX bnd
|
||||
# else
|
||||
# define PRESERVE_BND_REGS_PREFIX .byte 0xf2
|
||||
# endif
|
||||
#endif
|
||||
#define REGISTER_SAVE_RAX 0
|
||||
#define REGISTER_SAVE_RCX (REGISTER_SAVE_RAX + 8)
|
||||
#define REGISTER_SAVE_RDX (REGISTER_SAVE_RCX + 8)
|
||||
#define REGISTER_SAVE_RSI (REGISTER_SAVE_RDX + 8)
|
||||
@ -80,68 +63,56 @@
|
||||
|
||||
#define VEC_SIZE 64
|
||||
#define VMOVA vmovdqa64
|
||||
#if DL_RUNTIME_RESOLVE_REALIGN_STACK || VEC_SIZE <= DL_STACK_ALIGNMENT
|
||||
# define VMOV vmovdqa64
|
||||
#else
|
||||
# define VMOV vmovdqu64
|
||||
#endif
|
||||
#define VEC(i) zmm##i
|
||||
#define _dl_runtime_resolve _dl_runtime_resolve_avx512
|
||||
#define _dl_runtime_profile _dl_runtime_profile_avx512
|
||||
#include "dl-trampoline.h"
|
||||
#undef _dl_runtime_resolve
|
||||
#undef _dl_runtime_profile
|
||||
#undef VEC
|
||||
#undef VMOV
|
||||
#undef VMOVA
|
||||
#undef VEC_SIZE
|
||||
|
||||
#define VEC_SIZE 32
|
||||
#define VMOVA vmovdqa
|
||||
#if DL_RUNTIME_RESOLVE_REALIGN_STACK || VEC_SIZE <= DL_STACK_ALIGNMENT
|
||||
# define VMOV vmovdqa
|
||||
#else
|
||||
# define VMOV vmovdqu
|
||||
#endif
|
||||
#define VEC(i) ymm##i
|
||||
#define _dl_runtime_resolve _dl_runtime_resolve_avx
|
||||
#define _dl_runtime_resolve_opt _dl_runtime_resolve_avx_opt
|
||||
#define _dl_runtime_profile _dl_runtime_profile_avx
|
||||
#include "dl-trampoline.h"
|
||||
#undef _dl_runtime_resolve
|
||||
#undef _dl_runtime_resolve_opt
|
||||
#undef _dl_runtime_profile
|
||||
#undef VEC
|
||||
#undef VMOV
|
||||
#undef VMOVA
|
||||
#undef VEC_SIZE
|
||||
|
||||
/* movaps/movups is 1-byte shorter. */
|
||||
#define VEC_SIZE 16
|
||||
#define VMOVA movaps
|
||||
#if DL_RUNTIME_RESOLVE_REALIGN_STACK || VEC_SIZE <= DL_STACK_ALIGNMENT
|
||||
# define VMOV movaps
|
||||
#else
|
||||
# define VMOV movups
|
||||
#endif
|
||||
#define VEC(i) xmm##i
|
||||
#define _dl_runtime_resolve _dl_runtime_resolve_sse
|
||||
#define _dl_runtime_profile _dl_runtime_profile_sse
|
||||
#undef RESTORE_AVX
|
||||
#include "dl-trampoline.h"
|
||||
#undef _dl_runtime_resolve
|
||||
#undef _dl_runtime_profile
|
||||
#undef VMOV
|
||||
#undef VEC
|
||||
#undef VMOVA
|
||||
#undef VEC_SIZE
|
||||
|
||||
/* Used by _dl_runtime_resolve_avx_opt/_dl_runtime_resolve_avx512_opt
|
||||
to preserve the full vector registers with zero upper bits. */
|
||||
#define VMOVA vmovdqa
|
||||
#if DL_RUNTIME_RESOLVE_REALIGN_STACK || VEC_SIZE <= DL_STACK_ALIGNMENT
|
||||
# define VMOV vmovdqa
|
||||
#else
|
||||
# define VMOV vmovdqu
|
||||
#endif
|
||||
#define _dl_runtime_resolve _dl_runtime_resolve_sse_vex
|
||||
#define _dl_runtime_resolve_opt _dl_runtime_resolve_avx512_opt
|
||||
#define USE_FXSAVE
|
||||
#define STATE_SAVE_ALIGNMENT 16
|
||||
#define _dl_runtime_resolve _dl_runtime_resolve_fxsave
|
||||
#include "dl-trampoline.h"
|
||||
#undef _dl_runtime_resolve
|
||||
#undef USE_FXSAVE
|
||||
#undef STATE_SAVE_ALIGNMENT
|
||||
|
||||
#define USE_XSAVE
|
||||
#define STATE_SAVE_ALIGNMENT 64
|
||||
#define _dl_runtime_resolve _dl_runtime_resolve_xsave
|
||||
#include "dl-trampoline.h"
|
||||
#undef _dl_runtime_resolve
|
||||
#undef USE_XSAVE
|
||||
#undef STATE_SAVE_ALIGNMENT
|
||||
|
||||
#define USE_XSAVEC
|
||||
#define STATE_SAVE_ALIGNMENT 64
|
||||
#define _dl_runtime_resolve _dl_runtime_resolve_xsavec
|
||||
#include "dl-trampoline.h"
|
||||
#undef _dl_runtime_resolve
|
||||
#undef USE_XSAVEC
|
||||
#undef STATE_SAVE_ALIGNMENT
|
||||
|
||||
@ -16,140 +16,47 @@
|
||||
License along with the GNU C Library; if not, see
|
||||
<http://www.gnu.org/licenses/>. */
|
||||
|
||||
#undef REGISTER_SAVE_AREA_RAW
|
||||
#ifdef __ILP32__
|
||||
/* X32 saves RCX, RDX, RSI, RDI, R8 and R9 plus RAX as well as VEC0 to
|
||||
VEC7. */
|
||||
# define REGISTER_SAVE_AREA_RAW (8 * 7 + VEC_SIZE * 8)
|
||||
#else
|
||||
/* X86-64 saves RCX, RDX, RSI, RDI, R8 and R9 plus RAX as well as
|
||||
BND0, BND1, BND2, BND3 and VEC0 to VEC7. */
|
||||
# define REGISTER_SAVE_AREA_RAW (8 * 7 + 16 * 4 + VEC_SIZE * 8)
|
||||
#endif
|
||||
.text
|
||||
#ifdef _dl_runtime_resolve
|
||||
|
||||
#undef REGISTER_SAVE_AREA
|
||||
#undef LOCAL_STORAGE_AREA
|
||||
#undef BASE
|
||||
#if DL_RUNTIME_RESOLVE_REALIGN_STACK
|
||||
# define REGISTER_SAVE_AREA (REGISTER_SAVE_AREA_RAW + 8)
|
||||
/* Local stack area before jumping to function address: RBX. */
|
||||
# define LOCAL_STORAGE_AREA 8
|
||||
# define BASE rbx
|
||||
# if (REGISTER_SAVE_AREA % VEC_SIZE) != 0
|
||||
# error REGISTER_SAVE_AREA must be multples of VEC_SIZE
|
||||
# undef REGISTER_SAVE_AREA
|
||||
# undef LOCAL_STORAGE_AREA
|
||||
# undef BASE
|
||||
|
||||
# if (STATE_SAVE_ALIGNMENT % 16) != 0
|
||||
# error STATE_SAVE_ALIGNMENT must be multples of 16
|
||||
# endif
|
||||
#else
|
||||
# define REGISTER_SAVE_AREA REGISTER_SAVE_AREA_RAW
|
||||
|
||||
# if (STATE_SAVE_OFFSET % STATE_SAVE_ALIGNMENT) != 0
|
||||
# error STATE_SAVE_OFFSET must be multples of STATE_SAVE_ALIGNMENT
|
||||
# endif
|
||||
|
||||
# if DL_RUNTIME_RESOLVE_REALIGN_STACK
|
||||
/* Local stack area before jumping to function address: RBX. */
|
||||
# define LOCAL_STORAGE_AREA 8
|
||||
# define BASE rbx
|
||||
# ifdef USE_FXSAVE
|
||||
/* Use fxsave to save XMM registers. */
|
||||
# define REGISTER_SAVE_AREA (512 + STATE_SAVE_OFFSET)
|
||||
# if (REGISTER_SAVE_AREA % 16) != 0
|
||||
# error REGISTER_SAVE_AREA must be multples of 16
|
||||
# endif
|
||||
# endif
|
||||
# else
|
||||
# ifndef USE_FXSAVE
|
||||
# error USE_FXSAVE must be defined
|
||||
# endif
|
||||
/* Use fxsave to save XMM registers. */
|
||||
# define REGISTER_SAVE_AREA (512 + STATE_SAVE_OFFSET + 8)
|
||||
/* Local stack area before jumping to function address: All saved
|
||||
registers. */
|
||||
# define LOCAL_STORAGE_AREA REGISTER_SAVE_AREA
|
||||
# define BASE rsp
|
||||
# if (REGISTER_SAVE_AREA % 16) != 8
|
||||
# error REGISTER_SAVE_AREA must be odd multples of 8
|
||||
# endif
|
||||
#endif
|
||||
|
||||
.text
|
||||
#ifdef _dl_runtime_resolve_opt
|
||||
/* Use the smallest vector registers to preserve the full YMM/ZMM
|
||||
registers to avoid SSE transition penalty. */
|
||||
|
||||
# if VEC_SIZE == 32
|
||||
/* Check if the upper 128 bits in %ymm0 - %ymm7 registers are non-zero
|
||||
and preserve %xmm0 - %xmm7 registers with the zero upper bits. Since
|
||||
there is no SSE transition penalty on AVX512 processors which don't
|
||||
support XGETBV with ECX == 1, _dl_runtime_resolve_avx512_slow isn't
|
||||
provided. */
|
||||
.globl _dl_runtime_resolve_avx_slow
|
||||
.hidden _dl_runtime_resolve_avx_slow
|
||||
.type _dl_runtime_resolve_avx_slow, @function
|
||||
.align 16
|
||||
_dl_runtime_resolve_avx_slow:
|
||||
cfi_startproc
|
||||
cfi_adjust_cfa_offset(16) # Incorporate PLT
|
||||
vorpd %ymm0, %ymm1, %ymm8
|
||||
vorpd %ymm2, %ymm3, %ymm9
|
||||
vorpd %ymm4, %ymm5, %ymm10
|
||||
vorpd %ymm6, %ymm7, %ymm11
|
||||
vorpd %ymm8, %ymm9, %ymm9
|
||||
vorpd %ymm10, %ymm11, %ymm10
|
||||
vpcmpeqd %xmm8, %xmm8, %xmm8
|
||||
vorpd %ymm9, %ymm10, %ymm10
|
||||
vptest %ymm10, %ymm8
|
||||
# Preserve %ymm0 - %ymm7 registers if the upper 128 bits of any
|
||||
# %ymm0 - %ymm7 registers aren't zero.
|
||||
PRESERVE_BND_REGS_PREFIX
|
||||
jnc _dl_runtime_resolve_avx
|
||||
# Use vzeroupper to avoid SSE transition penalty.
|
||||
vzeroupper
|
||||
# Preserve %xmm0 - %xmm7 registers with the zero upper 128 bits
|
||||
# when the upper 128 bits of %ymm0 - %ymm7 registers are zero.
|
||||
PRESERVE_BND_REGS_PREFIX
|
||||
jmp _dl_runtime_resolve_sse_vex
|
||||
cfi_adjust_cfa_offset(-16) # Restore PLT adjustment
|
||||
cfi_endproc
|
||||
.size _dl_runtime_resolve_avx_slow, .-_dl_runtime_resolve_avx_slow
|
||||
# define LOCAL_STORAGE_AREA REGISTER_SAVE_AREA
|
||||
# define BASE rsp
|
||||
# if (REGISTER_SAVE_AREA % 16) != 8
|
||||
# error REGISTER_SAVE_AREA must be odd multples of 8
|
||||
# endif
|
||||
# endif
|
||||
|
||||
/* Use XGETBV with ECX == 1 to check which bits in vector registers are
|
||||
non-zero and only preserve the non-zero lower bits with zero upper
|
||||
bits. */
|
||||
.globl _dl_runtime_resolve_opt
|
||||
.hidden _dl_runtime_resolve_opt
|
||||
.type _dl_runtime_resolve_opt, @function
|
||||
.align 16
|
||||
_dl_runtime_resolve_opt:
|
||||
cfi_startproc
|
||||
cfi_adjust_cfa_offset(16) # Incorporate PLT
|
||||
pushq %rax
|
||||
cfi_adjust_cfa_offset(8)
|
||||
cfi_rel_offset(%rax, 0)
|
||||
pushq %rcx
|
||||
cfi_adjust_cfa_offset(8)
|
||||
cfi_rel_offset(%rcx, 0)
|
||||
pushq %rdx
|
||||
cfi_adjust_cfa_offset(8)
|
||||
cfi_rel_offset(%rdx, 0)
|
||||
movl $1, %ecx
|
||||
xgetbv
|
||||
movl %eax, %r11d
|
||||
popq %rdx
|
||||
cfi_adjust_cfa_offset(-8)
|
||||
cfi_restore (%rdx)
|
||||
popq %rcx
|
||||
cfi_adjust_cfa_offset(-8)
|
||||
cfi_restore (%rcx)
|
||||
popq %rax
|
||||
cfi_adjust_cfa_offset(-8)
|
||||
cfi_restore (%rax)
|
||||
# if VEC_SIZE == 32
|
||||
# For YMM registers, check if YMM state is in use.
|
||||
andl $bit_YMM_state, %r11d
|
||||
# Preserve %xmm0 - %xmm7 registers with the zero upper 128 bits if
|
||||
# YMM state isn't in use.
|
||||
PRESERVE_BND_REGS_PREFIX
|
||||
jz _dl_runtime_resolve_sse_vex
|
||||
# elif VEC_SIZE == 16
|
||||
# For ZMM registers, check if YMM state and ZMM state are in
|
||||
# use.
|
||||
andl $(bit_YMM_state | bit_ZMM0_15_state), %r11d
|
||||
cmpl $bit_YMM_state, %r11d
|
||||
# Preserve %zmm0 - %zmm7 registers if ZMM state is in use.
|
||||
PRESERVE_BND_REGS_PREFIX
|
||||
jg _dl_runtime_resolve_avx512
|
||||
# Preserve %ymm0 - %ymm7 registers with the zero upper 256 bits if
|
||||
# ZMM state isn't in use.
|
||||
PRESERVE_BND_REGS_PREFIX
|
||||
je _dl_runtime_resolve_avx
|
||||
# Preserve %xmm0 - %xmm7 registers with the zero upper 384 bits if
|
||||
# neither YMM state nor ZMM state are in use.
|
||||
# else
|
||||
# error Unsupported VEC_SIZE!
|
||||
# endif
|
||||
cfi_adjust_cfa_offset(-16) # Restore PLT adjustment
|
||||
cfi_endproc
|
||||
.size _dl_runtime_resolve_opt, .-_dl_runtime_resolve_opt
|
||||
#endif
|
||||
.globl _dl_runtime_resolve
|
||||
.hidden _dl_runtime_resolve
|
||||
.type _dl_runtime_resolve, @function
|
||||
@ -157,21 +64,30 @@ _dl_runtime_resolve_opt:
|
||||
cfi_startproc
|
||||
_dl_runtime_resolve:
|
||||
cfi_adjust_cfa_offset(16) # Incorporate PLT
|
||||
#if DL_RUNTIME_RESOLVE_REALIGN_STACK
|
||||
# if LOCAL_STORAGE_AREA != 8
|
||||
# error LOCAL_STORAGE_AREA must be 8
|
||||
# endif
|
||||
# if DL_RUNTIME_RESOLVE_REALIGN_STACK
|
||||
# if LOCAL_STORAGE_AREA != 8
|
||||
# error LOCAL_STORAGE_AREA must be 8
|
||||
# endif
|
||||
pushq %rbx # push subtracts stack by 8.
|
||||
cfi_adjust_cfa_offset(8)
|
||||
cfi_rel_offset(%rbx, 0)
|
||||
mov %RSP_LP, %RBX_LP
|
||||
cfi_def_cfa_register(%rbx)
|
||||
and $-VEC_SIZE, %RSP_LP
|
||||
#endif
|
||||
and $-STATE_SAVE_ALIGNMENT, %RSP_LP
|
||||
# endif
|
||||
# ifdef REGISTER_SAVE_AREA
|
||||
sub $REGISTER_SAVE_AREA, %RSP_LP
|
||||
#if !DL_RUNTIME_RESOLVE_REALIGN_STACK
|
||||
# if !DL_RUNTIME_RESOLVE_REALIGN_STACK
|
||||
cfi_adjust_cfa_offset(REGISTER_SAVE_AREA)
|
||||
#endif
|
||||
# endif
|
||||
# else
|
||||
# Allocate stack space of the required size to save the state.
|
||||
# if IS_IN (rtld)
|
||||
sub _rtld_local_ro+RTLD_GLOBAL_RO_DL_X86_CPU_FEATURES_OFFSET+XSAVE_STATE_SIZE_OFFSET(%rip), %RSP_LP
|
||||
# else
|
||||
sub _dl_x86_cpu_features+XSAVE_STATE_SIZE_OFFSET(%rip), %RSP_LP
|
||||
# endif
|
||||
# endif
|
||||
# Preserve registers otherwise clobbered.
|
||||
movq %rax, REGISTER_SAVE_RAX(%rsp)
|
||||
movq %rcx, REGISTER_SAVE_RCX(%rsp)
|
||||
@ -180,59 +96,42 @@ _dl_runtime_resolve:
|
||||
movq %rdi, REGISTER_SAVE_RDI(%rsp)
|
||||
movq %r8, REGISTER_SAVE_R8(%rsp)
|
||||
movq %r9, REGISTER_SAVE_R9(%rsp)
|
||||
VMOV %VEC(0), (REGISTER_SAVE_VEC_OFF)(%rsp)
|
||||
VMOV %VEC(1), (REGISTER_SAVE_VEC_OFF + VEC_SIZE)(%rsp)
|
||||
VMOV %VEC(2), (REGISTER_SAVE_VEC_OFF + VEC_SIZE * 2)(%rsp)
|
||||
VMOV %VEC(3), (REGISTER_SAVE_VEC_OFF + VEC_SIZE * 3)(%rsp)
|
||||
VMOV %VEC(4), (REGISTER_SAVE_VEC_OFF + VEC_SIZE * 4)(%rsp)
|
||||
VMOV %VEC(5), (REGISTER_SAVE_VEC_OFF + VEC_SIZE * 5)(%rsp)
|
||||
VMOV %VEC(6), (REGISTER_SAVE_VEC_OFF + VEC_SIZE * 6)(%rsp)
|
||||
VMOV %VEC(7), (REGISTER_SAVE_VEC_OFF + VEC_SIZE * 7)(%rsp)
|
||||
#ifndef __ILP32__
|
||||
# We also have to preserve bound registers. These are nops if
|
||||
# Intel MPX isn't available or disabled.
|
||||
# ifdef HAVE_MPX_SUPPORT
|
||||
bndmov %bnd0, REGISTER_SAVE_BND0(%rsp)
|
||||
bndmov %bnd1, REGISTER_SAVE_BND1(%rsp)
|
||||
bndmov %bnd2, REGISTER_SAVE_BND2(%rsp)
|
||||
bndmov %bnd3, REGISTER_SAVE_BND3(%rsp)
|
||||
# ifdef USE_FXSAVE
|
||||
fxsave STATE_SAVE_OFFSET(%rsp)
|
||||
# else
|
||||
# if REGISTER_SAVE_BND0 == 0
|
||||
.byte 0x66,0x0f,0x1b,0x04,0x24
|
||||
# else
|
||||
.byte 0x66,0x0f,0x1b,0x44,0x24,REGISTER_SAVE_BND0
|
||||
movl $STATE_SAVE_MASK, %eax
|
||||
xorl %edx, %edx
|
||||
# Clear the XSAVE Header.
|
||||
# ifdef USE_XSAVE
|
||||
movq %rdx, (STATE_SAVE_OFFSET + 512)(%rsp)
|
||||
movq %rdx, (STATE_SAVE_OFFSET + 512 + 8)(%rsp)
|
||||
# endif
|
||||
movq %rdx, (STATE_SAVE_OFFSET + 512 + 8 * 2)(%rsp)
|
||||
movq %rdx, (STATE_SAVE_OFFSET + 512 + 8 * 3)(%rsp)
|
||||
movq %rdx, (STATE_SAVE_OFFSET + 512 + 8 * 4)(%rsp)
|
||||
movq %rdx, (STATE_SAVE_OFFSET + 512 + 8 * 5)(%rsp)
|
||||
movq %rdx, (STATE_SAVE_OFFSET + 512 + 8 * 6)(%rsp)
|
||||
movq %rdx, (STATE_SAVE_OFFSET + 512 + 8 * 7)(%rsp)
|
||||
# ifdef USE_XSAVE
|
||||
xsave STATE_SAVE_OFFSET(%rsp)
|
||||
# else
|
||||
xsavec STATE_SAVE_OFFSET(%rsp)
|
||||
# endif
|
||||
.byte 0x66,0x0f,0x1b,0x4c,0x24,REGISTER_SAVE_BND1
|
||||
.byte 0x66,0x0f,0x1b,0x54,0x24,REGISTER_SAVE_BND2
|
||||
.byte 0x66,0x0f,0x1b,0x5c,0x24,REGISTER_SAVE_BND3
|
||||
# endif
|
||||
#endif
|
||||
# Copy args pushed by PLT in register.
|
||||
# %rdi: link_map, %rsi: reloc_index
|
||||
mov (LOCAL_STORAGE_AREA + 8)(%BASE), %RSI_LP
|
||||
mov LOCAL_STORAGE_AREA(%BASE), %RDI_LP
|
||||
call _dl_fixup # Call resolver.
|
||||
mov %RAX_LP, %R11_LP # Save return value
|
||||
#ifndef __ILP32__
|
||||
# Restore bound registers. These are nops if Intel MPX isn't
|
||||
# avaiable or disabled.
|
||||
# ifdef HAVE_MPX_SUPPORT
|
||||
bndmov REGISTER_SAVE_BND3(%rsp), %bnd3
|
||||
bndmov REGISTER_SAVE_BND2(%rsp), %bnd2
|
||||
bndmov REGISTER_SAVE_BND1(%rsp), %bnd1
|
||||
bndmov REGISTER_SAVE_BND0(%rsp), %bnd0
|
||||
# else
|
||||
.byte 0x66,0x0f,0x1a,0x5c,0x24,REGISTER_SAVE_BND3
|
||||
.byte 0x66,0x0f,0x1a,0x54,0x24,REGISTER_SAVE_BND2
|
||||
.byte 0x66,0x0f,0x1a,0x4c,0x24,REGISTER_SAVE_BND1
|
||||
# if REGISTER_SAVE_BND0 == 0
|
||||
.byte 0x66,0x0f,0x1a,0x04,0x24
|
||||
# else
|
||||
.byte 0x66,0x0f,0x1a,0x44,0x24,REGISTER_SAVE_BND0
|
||||
# endif
|
||||
# endif
|
||||
#endif
|
||||
# Get register content back.
|
||||
# ifdef USE_FXSAVE
|
||||
fxrstor STATE_SAVE_OFFSET(%rsp)
|
||||
# else
|
||||
movl $STATE_SAVE_MASK, %eax
|
||||
xorl %edx, %edx
|
||||
xrstor STATE_SAVE_OFFSET(%rsp)
|
||||
# endif
|
||||
movq REGISTER_SAVE_R9(%rsp), %r9
|
||||
movq REGISTER_SAVE_R8(%rsp), %r8
|
||||
movq REGISTER_SAVE_RDI(%rsp), %rdi
|
||||
@ -240,20 +139,12 @@ _dl_runtime_resolve:
|
||||
movq REGISTER_SAVE_RDX(%rsp), %rdx
|
||||
movq REGISTER_SAVE_RCX(%rsp), %rcx
|
||||
movq REGISTER_SAVE_RAX(%rsp), %rax
|
||||
VMOV (REGISTER_SAVE_VEC_OFF)(%rsp), %VEC(0)
|
||||
VMOV (REGISTER_SAVE_VEC_OFF + VEC_SIZE)(%rsp), %VEC(1)
|
||||
VMOV (REGISTER_SAVE_VEC_OFF + VEC_SIZE * 2)(%rsp), %VEC(2)
|
||||
VMOV (REGISTER_SAVE_VEC_OFF + VEC_SIZE * 3)(%rsp), %VEC(3)
|
||||
VMOV (REGISTER_SAVE_VEC_OFF + VEC_SIZE * 4)(%rsp), %VEC(4)
|
||||
VMOV (REGISTER_SAVE_VEC_OFF + VEC_SIZE * 5)(%rsp), %VEC(5)
|
||||
VMOV (REGISTER_SAVE_VEC_OFF + VEC_SIZE * 6)(%rsp), %VEC(6)
|
||||
VMOV (REGISTER_SAVE_VEC_OFF + VEC_SIZE * 7)(%rsp), %VEC(7)
|
||||
#if DL_RUNTIME_RESOLVE_REALIGN_STACK
|
||||
# if DL_RUNTIME_RESOLVE_REALIGN_STACK
|
||||
mov %RBX_LP, %RSP_LP
|
||||
cfi_def_cfa_register(%rsp)
|
||||
movq (%rsp), %rbx
|
||||
cfi_restore(%rbx)
|
||||
#endif
|
||||
# endif
|
||||
# Adjust stack(PLT did 2 pushes)
|
||||
add $(LOCAL_STORAGE_AREA + 16), %RSP_LP
|
||||
cfi_adjust_cfa_offset(-(LOCAL_STORAGE_AREA + 16))
|
||||
@ -262,11 +153,9 @@ _dl_runtime_resolve:
|
||||
jmp *%r11 # Jump to function address.
|
||||
cfi_endproc
|
||||
.size _dl_runtime_resolve, .-_dl_runtime_resolve
|
||||
#endif
|
||||
|
||||
|
||||
/* To preserve %xmm0 - %xmm7 registers, dl-trampoline.h is included
|
||||
twice, for _dl_runtime_resolve_sse and _dl_runtime_resolve_sse_vex.
|
||||
But we don't need another _dl_runtime_profile for XMM registers. */
|
||||
#if !defined PROF && defined _dl_runtime_profile
|
||||
# if (LR_VECTOR_OFFSET % VEC_SIZE) != 0
|
||||
# error LR_VECTOR_OFFSET must be multples of VEC_SIZE
|
||||
|
||||
Loading…
Reference in New Issue
Block a user