Improve performance of memmem

This patch significantly improves performance of memmem using a novel
modified Horspool algorithm.  Needles up to size 256 use a bad-character
table indexed by hashed pairs of characters to quickly skip past mismatches.
Long needles use a self-adapting filtering step to avoid comparing the whole
needle repeatedly.

By limiting the needle length to 256, the shift table only requires 8 bits
per entry, lowering preprocessing overhead and minimizing cache effects.
This limit also implies worst-case performance is linear.

Small needles up to size 2 use a dedicated linear search.  Very long needles
use the Two-Way algorithm (to avoid increasing stack size or slowing down
the common case, inlining is disabled).

The performance gain is 6.6 times on English text on AArch64 using random
needles with average size 8.

Tested against GLIBC testsuite and randomized tests.

Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>

	* string/memmem.c (__memmem): Rewrite to improve performance.

(cherry picked from commit 680942b016)

ChangeLog

@@ -1,5 +1,9 @@
 2019-09-13  Wilco Dijkstra  <wdijkstr@arm.com>
 
+	* string/memmem.c (__memmem): Rewrite to improve performance.
+
+2019-06-12  Wilco Dijkstra  <wdijkstr@arm.com>
+
 	* string/str-two-way.h (two_way_short_needle): Add inline to avoid
 	warning.
 	(two_way_long_needle): Block inlining.

string/memmem.c

@@ -15,17 +15,13 @@
    License along with the GNU C Library; if not, see
    <http://www.gnu.org/licenses/>.  */
 
-/* This particular implementation was written by Eric Blake, 2008.  */
-
 #ifndef _LIBC
 # include <config.h>
 #endif
 
-/* Specification of memmem.  */
 #include <string.h>
 
 #ifndef _LIBC
-# define __builtin_expect(expr, val)   (expr)
 # define __memmem	memmem
 #endif
 
@@ -36,51 +32,98 @@
 
 #undef memmem
 
-/* Return the first occurrence of NEEDLE in HAYSTACK.  Return HAYSTACK
-   if NEEDLE_LEN is 0, otherwise NULL if NEEDLE is not found in
-   HAYSTACK.  */
+/* Hash character pairs so a small shift table can be used.  All bits of
+   p[0] are included, but not all bits from p[-1].  So if two equal hashes
+   match on p[-1], p[0] matches too.  Hash collisions are harmless and result
+   in smaller shifts.  */
+#define hash2(p) (((size_t)(p)[0] - ((size_t)(p)[-1] << 3)) % sizeof (shift))
+
+/* Fast memmem algorithm with guaranteed linear-time performance.
+   Small needles up to size 2 use a dedicated linear search.  Longer needles
+   up to size 256 use a novel modified Horspool algorithm.  It hashes pairs
+   of characters to quickly skip past mismatches.  The main search loop only
+   exits if the last 2 characters match, avoiding unnecessary calls to memcmp
+   and allowing for a larger skip if there is no match.  A self-adapting
+   filtering check is used to quickly detect mismatches in long needles.
+   By limiting the needle length to 256, the shift table can be reduced to 8
+   bits per entry, lowering preprocessing overhead and minimizing cache effects.
+   The limit also implies worst-case performance is linear.
+   Needles larger than 256 characters use the linear-time Two-Way algorithm.  */
 void *
-__memmem (const void *haystack_start, size_t haystack_len,
-	  const void *needle_start, size_t needle_len)
+__memmem (const void *haystack, size_t hs_len,
+	  const void *needle, size_t ne_len)
 {
-  /* Abstract memory is considered to be an array of 'unsigned char' values,
-     not an array of 'char' values.  See ISO C 99 section 6.2.6.1.  */
-  const unsigned char *haystack = (const unsigned char *) haystack_start;
-  const unsigned char *needle = (const unsigned char *) needle_start;
+  const unsigned char *hs = (const unsigned char *) haystack;
+  const unsigned char *ne = (const unsigned char *) needle;
 
-  if (needle_len == 0)
-    /* The first occurrence of the empty string is deemed to occur at
-       the beginning of the string.  */
-    return (void *) haystack;
+  if (ne_len == 0)
+    return (void *) hs;
+  if (ne_len == 1)
+    return (void *) memchr (hs, ne[0], hs_len);
 
-  /* Sanity check, otherwise the loop might search through the whole
-     memory.  */
-  if (__glibc_unlikely (haystack_len < needle_len))
+  /* Ensure haystack length is >= needle length.  */
+  if (hs_len < ne_len)
     return NULL;
 
-  /* Use optimizations in memchr when possible, to reduce the search
-     size of haystack using a linear algorithm with a smaller
-     coefficient.  However, avoid memchr for long needles, since we
-     can often achieve sublinear performance.  */
-  if (needle_len < LONG_NEEDLE_THRESHOLD)
+  const unsigned char *end = hs + hs_len - ne_len;
+
+  if (ne_len == 2)
     {
-      haystack = memchr (haystack, *needle, haystack_len);
-      if (!haystack || __builtin_expect (needle_len == 1, 0))
-	return (void *) haystack;
-      haystack_len -= haystack - (const unsigned char *) haystack_start;
-      if (haystack_len < needle_len)
-	return NULL;
-      /* Check whether we have a match.  This improves performance since we
-	 avoid the initialization overhead of the two-way algorithm.  */
-      if (memcmp (haystack, needle, needle_len) == 0)
-	return (void *) haystack;
-      return two_way_short_needle (haystack, haystack_len, needle, needle_len);
+      uint32_t nw = ne[0] << 16 | ne[1], hw = hs[0] << 16 | hs[1];
+      for (hs++; hs <= end && hw != nw; )
+	hw = hw << 16 | *++hs;
+      return hw == nw ? (void *)hs - 1 : NULL;
     }
-  else
-    return two_way_long_needle (haystack, haystack_len, needle, needle_len);
+
+  /* Use Two-Way algorithm for very long needles.  */
+  if (__builtin_expect (ne_len > 256, 0))
+    return two_way_long_needle (hs, hs_len, ne, ne_len);
+
+  uint8_t shift[256];
+  size_t tmp, shift1;
+  size_t m1 = ne_len - 1;
+  size_t offset = 0;
+
+  memset (shift, 0, sizeof (shift));
+  for (int i = 1; i < m1; i++)
+    shift[hash2 (ne + i)] = i;
+  /* Shift1 is the amount we can skip after matching the hash of the
+     needle end but not the full needle.  */
+  shift1 = m1 - shift[hash2 (ne + m1)];
+  shift[hash2 (ne + m1)] = m1;
+
+  for ( ; hs <= end; )
+    {
+      /* Skip past character pairs not in the needle.  */
+      do
+	{
+	  hs += m1;
+	  tmp = shift[hash2 (hs)];
+	}
+      while (tmp == 0 && hs <= end);
+
+      /* If the match is not at the end of the needle, shift to the end
+	 and continue until we match the hash of the needle end.  */
+      hs -= tmp;
+      if (tmp < m1)
+	continue;
+
+      /* Hash of the last 2 characters matches.  If the needle is long,
+	 try to quickly filter out mismatches.  */
+      if (m1 < 15 || memcmp (hs + offset, ne + offset, 8) == 0)
+	{
+	  if (memcmp (hs, ne, m1) == 0)
+	    return (void *) hs;
+
+	  /* Adjust filter offset when it doesn't find the mismatch.  */
+	  offset = (offset >= 8 ? offset : m1) - 8;
+	}
+
+      /* Skip based on matching the hash of the needle end.  */
+      hs += shift1;
+    }
+  return NULL;
 }
 libc_hidden_def (__memmem)
 weak_alias (__memmem, memmem)
 libc_hidden_weak (memmem)
-
-#undef LONG_NEEDLE_THRESHOLD