glibc/sysdeps/s390/gconv-modules

51 lines
2.2 KiB
Plaintext
Raw Normal View History

S390: Get rid of make warning: overriding recipe for target gconv-modules. This patch introduces a way to provide an architecture dependent gconv-modules file. Before this patch, the gconv-modules file was normally installed from src-dir/iconvdata/gconv-modules. The S390 Makefile had overridden the installation recipe (with a make warning) in order to install the gconv-module-s390 file from build-dir. The iconvdata/Makefile provides another recipe, which copies the gconv-modules file from src to build dir, which are used by the testcases. Thus the testcases does not use the currently build s390-modules. This patch uses build-dir/iconvdata/gconv-modules for installation, which is generated by concatenating src-dir/iconvdata/gconv-modules and the architecture specific one. The latter one can be specified by setting the variable sysdeps-gconv-modules in sysdeps/.../Makefile. The architecture specific gconv-modules file is emitted before the common one because these modules aren't used in all possible conversions. E.g. the converting from INTERNAL to UTF-16 used the common UTF-16.so module instead of UTF16_UTF32_Z9.so. This way, the s390-Makefile does not need to override the recipe for gconv-modules and no warning is emitted anymore. Since we no longer support empty objpfx the conditional test in iconvdata/Makefile is removed. ChangeLog: * iconvdata/Makefile ($(inst_gconvdir)/gconv-modules): Install file from $(objpfx)gconv-modules. ($(objpfx)gconv-modules): Concatenate architecture specific file in variable sysdeps-gconv-modules and gconv-modules in src dir. * sysdeps/s390/gconv-modules: New file. * sysdeps/s390/s390-64/Makefile: ($(inst_gconvdir)/gconv-modules): Deleted. ($(objpfx)gconv-modules-s390): Deleted. (sysdeps-gconv-modules): New variable.
2016-05-25 23:18:04 +08:00
# GNU libc iconv configuration.
# Copyright (C) 1997-2021 Free Software Foundation, Inc.
S390: Get rid of make warning: overriding recipe for target gconv-modules. This patch introduces a way to provide an architecture dependent gconv-modules file. Before this patch, the gconv-modules file was normally installed from src-dir/iconvdata/gconv-modules. The S390 Makefile had overridden the installation recipe (with a make warning) in order to install the gconv-module-s390 file from build-dir. The iconvdata/Makefile provides another recipe, which copies the gconv-modules file from src to build dir, which are used by the testcases. Thus the testcases does not use the currently build s390-modules. This patch uses build-dir/iconvdata/gconv-modules for installation, which is generated by concatenating src-dir/iconvdata/gconv-modules and the architecture specific one. The latter one can be specified by setting the variable sysdeps-gconv-modules in sysdeps/.../Makefile. The architecture specific gconv-modules file is emitted before the common one because these modules aren't used in all possible conversions. E.g. the converting from INTERNAL to UTF-16 used the common UTF-16.so module instead of UTF16_UTF32_Z9.so. This way, the s390-Makefile does not need to override the recipe for gconv-modules and no warning is emitted anymore. Since we no longer support empty objpfx the conditional test in iconvdata/Makefile is removed. ChangeLog: * iconvdata/Makefile ($(inst_gconvdir)/gconv-modules): Install file from $(objpfx)gconv-modules. ($(objpfx)gconv-modules): Concatenate architecture specific file in variable sysdeps-gconv-modules and gconv-modules in src dir. * sysdeps/s390/gconv-modules: New file. * sysdeps/s390/s390-64/Makefile: ($(inst_gconvdir)/gconv-modules): Deleted. ($(objpfx)gconv-modules-s390): Deleted. (sysdeps-gconv-modules): New variable.
2016-05-25 23:18:04 +08:00
# This file is part of the GNU C Library.
# The GNU C Library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
# License as published by the Free Software Foundation; either
# version 2.1 of the License, or (at your option) any later version.
# The GNU C Library is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# Lesser General Public License for more details.
# You should have received a copy of the GNU Lesser General Public
# License along with the GNU C Library; if not, see
Prefer https to http for gnu.org and fsf.org URLs Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '*.po' \ ! -name 'ChangeLog*' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-09-07 13:40:42 +08:00
# <https://www.gnu.org/licenses/>.
S390: Get rid of make warning: overriding recipe for target gconv-modules. This patch introduces a way to provide an architecture dependent gconv-modules file. Before this patch, the gconv-modules file was normally installed from src-dir/iconvdata/gconv-modules. The S390 Makefile had overridden the installation recipe (with a make warning) in order to install the gconv-module-s390 file from build-dir. The iconvdata/Makefile provides another recipe, which copies the gconv-modules file from src to build dir, which are used by the testcases. Thus the testcases does not use the currently build s390-modules. This patch uses build-dir/iconvdata/gconv-modules for installation, which is generated by concatenating src-dir/iconvdata/gconv-modules and the architecture specific one. The latter one can be specified by setting the variable sysdeps-gconv-modules in sysdeps/.../Makefile. The architecture specific gconv-modules file is emitted before the common one because these modules aren't used in all possible conversions. E.g. the converting from INTERNAL to UTF-16 used the common UTF-16.so module instead of UTF16_UTF32_Z9.so. This way, the s390-Makefile does not need to override the recipe for gconv-modules and no warning is emitted anymore. Since we no longer support empty objpfx the conditional test in iconvdata/Makefile is removed. ChangeLog: * iconvdata/Makefile ($(inst_gconvdir)/gconv-modules): Install file from $(objpfx)gconv-modules. ($(objpfx)gconv-modules): Concatenate architecture specific file in variable sysdeps-gconv-modules and gconv-modules in src dir. * sysdeps/s390/gconv-modules: New file. * sysdeps/s390/s390-64/Makefile: ($(inst_gconvdir)/gconv-modules): Deleted. ($(objpfx)gconv-modules-s390): Deleted. (sysdeps-gconv-modules): New variable.
2016-05-25 23:18:04 +08:00
# All lines contain the following information:
# If the lines start with `module'
# fromset: either a name triple or a regular expression triple.
# toset: a name triple or an expression with \N to get regular
# expression matching results.
# filename: filename of the module implementing the transformation.
# If it is not absolute the path is made absolute by prepending
# the directory the configuration file is found in.
# cost: optional cost of the transformation. Default is 1.
# If the lines start with `alias'
# alias: alias name which is not really recognized.
# name: the real name of the character set
# S/390 hardware accelerated modules
# from to module cost
module ISO-8859-1// IBM037// ISO-8859-1_CP037_Z900 1
module IBM037// ISO-8859-1// ISO-8859-1_CP037_Z900 1
module ISO-10646/UTF8/ UTF-32// UTF8_UTF32_Z9 1
module UTF-32BE// ISO-10646/UTF8/ UTF8_UTF32_Z9 1
module ISO-10646/UTF8/ UTF-32BE// UTF8_UTF32_Z9 1
module UTF-16BE// UTF-32// UTF16_UTF32_Z9 1
module UTF-32BE// UTF-16// UTF16_UTF32_Z9 1
module INTERNAL UTF-16// UTF16_UTF32_Z9 1
module UTF-32BE// UTF-16BE// UTF16_UTF32_Z9 1
module INTERNAL UTF-16BE// UTF16_UTF32_Z9 1
module UTF-16BE// UTF-32BE// UTF16_UTF32_Z9 1
module UTF-16BE// INTERNAL UTF16_UTF32_Z9 1
module UTF-16BE// ISO-10646/UTF8/ UTF8_UTF16_Z9 1
module ISO-10646/UTF8/ UTF-16// UTF8_UTF16_Z9 1
module ISO-10646/UTF8/ UTF-16BE// UTF8_UTF16_Z9 1