mirror/glibc
2
0
Fork 0
mirror of git://sourceware.org/git/glibc.git synced 2024-12-21 04:31:04 +08:00
Code Issues Packages Projects Releases Wiki Activity
96dffc26dc
glibc/sysdeps/unix/sysv/linux/x86/elision-conf.c

84 lines
2.9 KiB
C
Raw Normal View History

Add the low level infrastructure for pthreads lock elision with TSX Lock elision using TSX is a technique to optimize lock scaling It allows to run locks in parallel using hardware support for a transactional execution mode in 4th generation Intel Core CPUs. See http://www.intel.com/software/tsx for more Information. This patch implements a simple adaptive lock elision algorithm based on RTM. It enables elision for the pthread mutexes and rwlocks. The algorithm keeps track whether a mutex successfully elides or not, and stops eliding for some time when it is not. When the CPU supports RTM the elision path is automatically tried, otherwise any elision is disabled. The adaptation algorithm and its tuning is currently preliminary. The code adds some checks to the lock fast paths. Micro-benchmarks show little to no difference without RTM. This patch implements the low level "lll_" code for lock elision. Followon patches hook this into the pthread implementation Changes with the RTM mutexes: ----------------------------- Lock elision in pthreads is generally compatible with existing programs. There are some obscure exceptions, which are expected to be uncommon. See the manual for more details. - A broken program that unlocks a free lock will crash. There are ways around this with some tradeoffs (more code in hot paths) I'm still undecided on what approach to take here; have to wait for testing reports. - pthread_mutex_destroy of a lock mutex will not return EBUSY but 0. - There's also a similar situation with trylock outside the mutex, "knowing" that the mutex must be held due to some other condition. In this case an assert failure cannot be recovered. This situation is usually an existing bug in the program. - Same applies to the rwlocks. Some of the return values changes (for example there is no EDEADLK for an elided lock, unless it aborts. However when elided it will also never deadlock of course) - Timing changes, so broken programs that make assumptions about specific timing may expose already existing latent problems. Note that these broken programs will break in other situations too (loaded system, new faster hardware, compiler optimizations etc.) - Programs with non recursive mutexes that take them recursively in a thread and which would always deadlock without elision may not always see a deadlock. The deadlock will only happen on an early or delayed abort (which typically happens at some point) This only happens for mutexes not explicitely set to PTHREAD_MUTEX_NORMAL or PTHREAD_MUTEX_ADAPTIVE_NP. PTHREAD_MUTEX_NORMAL mutexes do not elide. The elision default can be set at configure time. This patch implements the basic infrastructure for elision.
2012-11-10 16:51:26 +08:00
/* elision-conf.c: Lock elision tunable parameters.
Update copyright dates with scripts/update-copyrights.
2015-01-03 00:28:19 +08:00
Copyright (C) 2013-2015 Free Software Foundation, Inc.
Add the low level infrastructure for pthreads lock elision with TSX Lock elision using TSX is a technique to optimize lock scaling It allows to run locks in parallel using hardware support for a transactional execution mode in 4th generation Intel Core CPUs. See http://www.intel.com/software/tsx for more Information. This patch implements a simple adaptive lock elision algorithm based on RTM. It enables elision for the pthread mutexes and rwlocks. The algorithm keeps track whether a mutex successfully elides or not, and stops eliding for some time when it is not. When the CPU supports RTM the elision path is automatically tried, otherwise any elision is disabled. The adaptation algorithm and its tuning is currently preliminary. The code adds some checks to the lock fast paths. Micro-benchmarks show little to no difference without RTM. This patch implements the low level "lll_" code for lock elision. Followon patches hook this into the pthread implementation Changes with the RTM mutexes: ----------------------------- Lock elision in pthreads is generally compatible with existing programs. There are some obscure exceptions, which are expected to be uncommon. See the manual for more details. - A broken program that unlocks a free lock will crash. There are ways around this with some tradeoffs (more code in hot paths) I'm still undecided on what approach to take here; have to wait for testing reports. - pthread_mutex_destroy of a lock mutex will not return EBUSY but 0. - There's also a similar situation with trylock outside the mutex, "knowing" that the mutex must be held due to some other condition. In this case an assert failure cannot be recovered. This situation is usually an existing bug in the program. - Same applies to the rwlocks. Some of the return values changes (for example there is no EDEADLK for an elided lock, unless it aborts. However when elided it will also never deadlock of course) - Timing changes, so broken programs that make assumptions about specific timing may expose already existing latent problems. Note that these broken programs will break in other situations too (loaded system, new faster hardware, compiler optimizations etc.) - Programs with non recursive mutexes that take them recursively in a thread and which would always deadlock without elision may not always see a deadlock. The deadlock will only happen on an early or delayed abort (which typically happens at some point) This only happens for mutexes not explicitely set to PTHREAD_MUTEX_NORMAL or PTHREAD_MUTEX_ADAPTIVE_NP. PTHREAD_MUTEX_NORMAL mutexes do not elide. The elision default can be set at configure time. This patch implements the basic infrastructure for elision.
2012-11-10 16:51:26 +08:00
This file is part of the GNU C Library.
The GNU C Library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
The GNU C Library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with the GNU C Library; if not, see
Clean up whitespace in lock elision patches. Signed-off-by: Carlos O'Donell <carlos@redhat.com>
2013-07-19 13:16:28 +08:00
<http://www.gnu.org/licenses/>. */
Add the low level infrastructure for pthreads lock elision with TSX Lock elision using TSX is a technique to optimize lock scaling It allows to run locks in parallel using hardware support for a transactional execution mode in 4th generation Intel Core CPUs. See http://www.intel.com/software/tsx for more Information. This patch implements a simple adaptive lock elision algorithm based on RTM. It enables elision for the pthread mutexes and rwlocks. The algorithm keeps track whether a mutex successfully elides or not, and stops eliding for some time when it is not. When the CPU supports RTM the elision path is automatically tried, otherwise any elision is disabled. The adaptation algorithm and its tuning is currently preliminary. The code adds some checks to the lock fast paths. Micro-benchmarks show little to no difference without RTM. This patch implements the low level "lll_" code for lock elision. Followon patches hook this into the pthread implementation Changes with the RTM mutexes: ----------------------------- Lock elision in pthreads is generally compatible with existing programs. There are some obscure exceptions, which are expected to be uncommon. See the manual for more details. - A broken program that unlocks a free lock will crash. There are ways around this with some tradeoffs (more code in hot paths) I'm still undecided on what approach to take here; have to wait for testing reports. - pthread_mutex_destroy of a lock mutex will not return EBUSY but 0. - There's also a similar situation with trylock outside the mutex, "knowing" that the mutex must be held due to some other condition. In this case an assert failure cannot be recovered. This situation is usually an existing bug in the program. - Same applies to the rwlocks. Some of the return values changes (for example there is no EDEADLK for an elided lock, unless it aborts. However when elided it will also never deadlock of course) - Timing changes, so broken programs that make assumptions about specific timing may expose already existing latent problems. Note that these broken programs will break in other situations too (loaded system, new faster hardware, compiler optimizations etc.) - Programs with non recursive mutexes that take them recursively in a thread and which would always deadlock without elision may not always see a deadlock. The deadlock will only happen on an early or delayed abort (which typically happens at some point) This only happens for mutexes not explicitely set to PTHREAD_MUTEX_NORMAL or PTHREAD_MUTEX_ADAPTIVE_NP. PTHREAD_MUTEX_NORMAL mutexes do not elide. The elision default can be set at configure time. This patch implements the basic infrastructure for elision.
2012-11-10 16:51:26 +08:00
Add a configure option to enable lock elision and disable by default Can be enabled with --enable-lock-elision=yes at configure time.
2013-05-17 10:17:14 +08:00
#include "config.h"
Add the low level infrastructure for pthreads lock elision with TSX Lock elision using TSX is a technique to optimize lock scaling It allows to run locks in parallel using hardware support for a transactional execution mode in 4th generation Intel Core CPUs. See http://www.intel.com/software/tsx for more Information. This patch implements a simple adaptive lock elision algorithm based on RTM. It enables elision for the pthread mutexes and rwlocks. The algorithm keeps track whether a mutex successfully elides or not, and stops eliding for some time when it is not. When the CPU supports RTM the elision path is automatically tried, otherwise any elision is disabled. The adaptation algorithm and its tuning is currently preliminary. The code adds some checks to the lock fast paths. Micro-benchmarks show little to no difference without RTM. This patch implements the low level "lll_" code for lock elision. Followon patches hook this into the pthread implementation Changes with the RTM mutexes: ----------------------------- Lock elision in pthreads is generally compatible with existing programs. There are some obscure exceptions, which are expected to be uncommon. See the manual for more details. - A broken program that unlocks a free lock will crash. There are ways around this with some tradeoffs (more code in hot paths) I'm still undecided on what approach to take here; have to wait for testing reports. - pthread_mutex_destroy of a lock mutex will not return EBUSY but 0. - There's also a similar situation with trylock outside the mutex, "knowing" that the mutex must be held due to some other condition. In this case an assert failure cannot be recovered. This situation is usually an existing bug in the program. - Same applies to the rwlocks. Some of the return values changes (for example there is no EDEADLK for an elided lock, unless it aborts. However when elided it will also never deadlock of course) - Timing changes, so broken programs that make assumptions about specific timing may expose already existing latent problems. Note that these broken programs will break in other situations too (loaded system, new faster hardware, compiler optimizations etc.) - Programs with non recursive mutexes that take them recursively in a thread and which would always deadlock without elision may not always see a deadlock. The deadlock will only happen on an early or delayed abort (which typically happens at some point) This only happens for mutexes not explicitely set to PTHREAD_MUTEX_NORMAL or PTHREAD_MUTEX_ADAPTIVE_NP. PTHREAD_MUTEX_NORMAL mutexes do not elide. The elision default can be set at configure time. This patch implements the basic infrastructure for elision.
2012-11-10 16:51:26 +08:00
#include <pthreadP.h>
#include <init-arch.h>
#include <elision-conf.h>
#include <unistd.h>
/* Reasonable initial tuning values, may be revised in the future.
This is a conservative initial value. */
struct elision_config __elision_aconf =
{
/* How often to not attempt to use elision if a transaction aborted
because the lock is already acquired. Expressed in number of lock
acquisition attempts. */
.skip_lock_busy = 3,
/* How often to not attempt to use elision if a transaction aborted due
Clean up whitespace in lock elision patches. Signed-off-by: Carlos O'Donell <carlos@redhat.com>
2013-07-19 13:16:28 +08:00
to reasons other than other threads' memory accesses. Expressed in
Add the low level infrastructure for pthreads lock elision with TSX Lock elision using TSX is a technique to optimize lock scaling It allows to run locks in parallel using hardware support for a transactional execution mode in 4th generation Intel Core CPUs. See http://www.intel.com/software/tsx for more Information. This patch implements a simple adaptive lock elision algorithm based on RTM. It enables elision for the pthread mutexes and rwlocks. The algorithm keeps track whether a mutex successfully elides or not, and stops eliding for some time when it is not. When the CPU supports RTM the elision path is automatically tried, otherwise any elision is disabled. The adaptation algorithm and its tuning is currently preliminary. The code adds some checks to the lock fast paths. Micro-benchmarks show little to no difference without RTM. This patch implements the low level "lll_" code for lock elision. Followon patches hook this into the pthread implementation Changes with the RTM mutexes: ----------------------------- Lock elision in pthreads is generally compatible with existing programs. There are some obscure exceptions, which are expected to be uncommon. See the manual for more details. - A broken program that unlocks a free lock will crash. There are ways around this with some tradeoffs (more code in hot paths) I'm still undecided on what approach to take here; have to wait for testing reports. - pthread_mutex_destroy of a lock mutex will not return EBUSY but 0. - There's also a similar situation with trylock outside the mutex, "knowing" that the mutex must be held due to some other condition. In this case an assert failure cannot be recovered. This situation is usually an existing bug in the program. - Same applies to the rwlocks. Some of the return values changes (for example there is no EDEADLK for an elided lock, unless it aborts. However when elided it will also never deadlock of course) - Timing changes, so broken programs that make assumptions about specific timing may expose already existing latent problems. Note that these broken programs will break in other situations too (loaded system, new faster hardware, compiler optimizations etc.) - Programs with non recursive mutexes that take them recursively in a thread and which would always deadlock without elision may not always see a deadlock. The deadlock will only happen on an early or delayed abort (which typically happens at some point) This only happens for mutexes not explicitely set to PTHREAD_MUTEX_NORMAL or PTHREAD_MUTEX_ADAPTIVE_NP. PTHREAD_MUTEX_NORMAL mutexes do not elide. The elision default can be set at configure time. This patch implements the basic infrastructure for elision.
2012-11-10 16:51:26 +08:00
number of lock acquisition attempts. */
.skip_lock_internal_abort = 3,
/* How often we retry using elision if there is chance for the transaction
to finish execution (e.g., it wasn't aborted due to the lock being
already acquired. */
.retry_try_xbegin = 3,
/* Same as SKIP_LOCK_INTERNAL_ABORT but for trylock. */
.skip_trylock_internal_abort = 3,
};
Clean up whitespace in lock elision patches. Signed-off-by: Carlos O'Donell <carlos@redhat.com>
2013-07-19 13:16:28 +08:00
/* Set when the CPU supports elision. When false elision is never attempted.
*/
Add the low level infrastructure for pthreads lock elision with TSX Lock elision using TSX is a technique to optimize lock scaling It allows to run locks in parallel using hardware support for a transactional execution mode in 4th generation Intel Core CPUs. See http://www.intel.com/software/tsx for more Information. This patch implements a simple adaptive lock elision algorithm based on RTM. It enables elision for the pthread mutexes and rwlocks. The algorithm keeps track whether a mutex successfully elides or not, and stops eliding for some time when it is not. When the CPU supports RTM the elision path is automatically tried, otherwise any elision is disabled. The adaptation algorithm and its tuning is currently preliminary. The code adds some checks to the lock fast paths. Micro-benchmarks show little to no difference without RTM. This patch implements the low level "lll_" code for lock elision. Followon patches hook this into the pthread implementation Changes with the RTM mutexes: ----------------------------- Lock elision in pthreads is generally compatible with existing programs. There are some obscure exceptions, which are expected to be uncommon. See the manual for more details. - A broken program that unlocks a free lock will crash. There are ways around this with some tradeoffs (more code in hot paths) I'm still undecided on what approach to take here; have to wait for testing reports. - pthread_mutex_destroy of a lock mutex will not return EBUSY but 0. - There's also a similar situation with trylock outside the mutex, "knowing" that the mutex must be held due to some other condition. In this case an assert failure cannot be recovered. This situation is usually an existing bug in the program. - Same applies to the rwlocks. Some of the return values changes (for example there is no EDEADLK for an elided lock, unless it aborts. However when elided it will also never deadlock of course) - Timing changes, so broken programs that make assumptions about specific timing may expose already existing latent problems. Note that these broken programs will break in other situations too (loaded system, new faster hardware, compiler optimizations etc.) - Programs with non recursive mutexes that take them recursively in a thread and which would always deadlock without elision may not always see a deadlock. The deadlock will only happen on an early or delayed abort (which typically happens at some point) This only happens for mutexes not explicitely set to PTHREAD_MUTEX_NORMAL or PTHREAD_MUTEX_ADAPTIVE_NP. PTHREAD_MUTEX_NORMAL mutexes do not elide. The elision default can be set at configure time. This patch implements the basic infrastructure for elision.
2012-11-10 16:51:26 +08:00
int __elision_available attribute_hidden;
Clean up whitespace in lock elision patches. Signed-off-by: Carlos O'Donell <carlos@redhat.com>
2013-07-19 13:16:28 +08:00
/* Force elision for all new locks. This is used to decide whether existing
Add the low level infrastructure for pthreads lock elision with TSX Lock elision using TSX is a technique to optimize lock scaling It allows to run locks in parallel using hardware support for a transactional execution mode in 4th generation Intel Core CPUs. See http://www.intel.com/software/tsx for more Information. This patch implements a simple adaptive lock elision algorithm based on RTM. It enables elision for the pthread mutexes and rwlocks. The algorithm keeps track whether a mutex successfully elides or not, and stops eliding for some time when it is not. When the CPU supports RTM the elision path is automatically tried, otherwise any elision is disabled. The adaptation algorithm and its tuning is currently preliminary. The code adds some checks to the lock fast paths. Micro-benchmarks show little to no difference without RTM. This patch implements the low level "lll_" code for lock elision. Followon patches hook this into the pthread implementation Changes with the RTM mutexes: ----------------------------- Lock elision in pthreads is generally compatible with existing programs. There are some obscure exceptions, which are expected to be uncommon. See the manual for more details. - A broken program that unlocks a free lock will crash. There are ways around this with some tradeoffs (more code in hot paths) I'm still undecided on what approach to take here; have to wait for testing reports. - pthread_mutex_destroy of a lock mutex will not return EBUSY but 0. - There's also a similar situation with trylock outside the mutex, "knowing" that the mutex must be held due to some other condition. In this case an assert failure cannot be recovered. This situation is usually an existing bug in the program. - Same applies to the rwlocks. Some of the return values changes (for example there is no EDEADLK for an elided lock, unless it aborts. However when elided it will also never deadlock of course) - Timing changes, so broken programs that make assumptions about specific timing may expose already existing latent problems. Note that these broken programs will break in other situations too (loaded system, new faster hardware, compiler optimizations etc.) - Programs with non recursive mutexes that take them recursively in a thread and which would always deadlock without elision may not always see a deadlock. The deadlock will only happen on an early or delayed abort (which typically happens at some point) This only happens for mutexes not explicitely set to PTHREAD_MUTEX_NORMAL or PTHREAD_MUTEX_ADAPTIVE_NP. PTHREAD_MUTEX_NORMAL mutexes do not elide. The elision default can be set at configure time. This patch implements the basic infrastructure for elision.
2012-11-10 16:51:26 +08:00
DEFAULT locks should be automatically upgraded to elision in
Clean up whitespace in lock elision patches. Signed-off-by: Carlos O'Donell <carlos@redhat.com>
2013-07-19 13:16:28 +08:00
pthread_mutex_lock(). Disabled for suid programs. Only used when elision
Add the low level infrastructure for pthreads lock elision with TSX Lock elision using TSX is a technique to optimize lock scaling It allows to run locks in parallel using hardware support for a transactional execution mode in 4th generation Intel Core CPUs. See http://www.intel.com/software/tsx for more Information. This patch implements a simple adaptive lock elision algorithm based on RTM. It enables elision for the pthread mutexes and rwlocks. The algorithm keeps track whether a mutex successfully elides or not, and stops eliding for some time when it is not. When the CPU supports RTM the elision path is automatically tried, otherwise any elision is disabled. The adaptation algorithm and its tuning is currently preliminary. The code adds some checks to the lock fast paths. Micro-benchmarks show little to no difference without RTM. This patch implements the low level "lll_" code for lock elision. Followon patches hook this into the pthread implementation Changes with the RTM mutexes: ----------------------------- Lock elision in pthreads is generally compatible with existing programs. There are some obscure exceptions, which are expected to be uncommon. See the manual for more details. - A broken program that unlocks a free lock will crash. There are ways around this with some tradeoffs (more code in hot paths) I'm still undecided on what approach to take here; have to wait for testing reports. - pthread_mutex_destroy of a lock mutex will not return EBUSY but 0. - There's also a similar situation with trylock outside the mutex, "knowing" that the mutex must be held due to some other condition. In this case an assert failure cannot be recovered. This situation is usually an existing bug in the program. - Same applies to the rwlocks. Some of the return values changes (for example there is no EDEADLK for an elided lock, unless it aborts. However when elided it will also never deadlock of course) - Timing changes, so broken programs that make assumptions about specific timing may expose already existing latent problems. Note that these broken programs will break in other situations too (loaded system, new faster hardware, compiler optimizations etc.) - Programs with non recursive mutexes that take them recursively in a thread and which would always deadlock without elision may not always see a deadlock. The deadlock will only happen on an early or delayed abort (which typically happens at some point) This only happens for mutexes not explicitely set to PTHREAD_MUTEX_NORMAL or PTHREAD_MUTEX_ADAPTIVE_NP. PTHREAD_MUTEX_NORMAL mutexes do not elide. The elision default can be set at configure time. This patch implements the basic infrastructure for elision.
2012-11-10 16:51:26 +08:00
is available. */
int __pthread_force_elision attribute_hidden;
/* Initialize elison. */
static void
elision_init (int argc __attribute__ ((unused)),
char **argv __attribute__ ((unused)),
char **environ)
{
__elision_available = HAS_RTM;
Add a configure option to enable lock elision and disable by default Can be enabled with --enable-lock-elision=yes at configure time.
2013-05-17 10:17:14 +08:00
#ifdef ENABLE_LOCK_ELISION
Add the low level infrastructure for pthreads lock elision with TSX Lock elision using TSX is a technique to optimize lock scaling It allows to run locks in parallel using hardware support for a transactional execution mode in 4th generation Intel Core CPUs. See http://www.intel.com/software/tsx for more Information. This patch implements a simple adaptive lock elision algorithm based on RTM. It enables elision for the pthread mutexes and rwlocks. The algorithm keeps track whether a mutex successfully elides or not, and stops eliding for some time when it is not. When the CPU supports RTM the elision path is automatically tried, otherwise any elision is disabled. The adaptation algorithm and its tuning is currently preliminary. The code adds some checks to the lock fast paths. Micro-benchmarks show little to no difference without RTM. This patch implements the low level "lll_" code for lock elision. Followon patches hook this into the pthread implementation Changes with the RTM mutexes: ----------------------------- Lock elision in pthreads is generally compatible with existing programs. There are some obscure exceptions, which are expected to be uncommon. See the manual for more details. - A broken program that unlocks a free lock will crash. There are ways around this with some tradeoffs (more code in hot paths) I'm still undecided on what approach to take here; have to wait for testing reports. - pthread_mutex_destroy of a lock mutex will not return EBUSY but 0. - There's also a similar situation with trylock outside the mutex, "knowing" that the mutex must be held due to some other condition. In this case an assert failure cannot be recovered. This situation is usually an existing bug in the program. - Same applies to the rwlocks. Some of the return values changes (for example there is no EDEADLK for an elided lock, unless it aborts. However when elided it will also never deadlock of course) - Timing changes, so broken programs that make assumptions about specific timing may expose already existing latent problems. Note that these broken programs will break in other situations too (loaded system, new faster hardware, compiler optimizations etc.) - Programs with non recursive mutexes that take them recursively in a thread and which would always deadlock without elision may not always see a deadlock. The deadlock will only happen on an early or delayed abort (which typically happens at some point) This only happens for mutexes not explicitely set to PTHREAD_MUTEX_NORMAL or PTHREAD_MUTEX_ADAPTIVE_NP. PTHREAD_MUTEX_NORMAL mutexes do not elide. The elision default can be set at configure time. This patch implements the basic infrastructure for elision.
2012-11-10 16:51:26 +08:00
__pthread_force_elision = __libc_enable_secure ? 0 : __elision_available;
Add a configure option to enable lock elision and disable by default Can be enabled with --enable-lock-elision=yes at configure time.
2013-05-17 10:17:14 +08:00
#endif
Add adaptive elision to rwlocks This patch relies on the C version of the rwlocks posted earlier. With C rwlocks it is very straight forward to do adaptive elision using TSX. It is based on the infrastructure added earlier for mutexes, but uses its own elision macros. The macros are fairly general purpose and could be used for other elision purposes too. This version is much cleaner than the earlier assembler based version, and in particular implements adaptation which makes it safer. I changed the behavior slightly to not require any changes in the test suite and fully conform to all expected behaviors (generally at the cost of not eliding in various situations). In particular this means the timedlock variants are not elided. Nested trylock aborts.
2014-03-31 23:07:46 +08:00
if (!HAS_RTM)
__elision_aconf.retry_try_xbegin = 0; /* Disable elision on rwlocks */
Add the low level infrastructure for pthreads lock elision with TSX Lock elision using TSX is a technique to optimize lock scaling It allows to run locks in parallel using hardware support for a transactional execution mode in 4th generation Intel Core CPUs. See http://www.intel.com/software/tsx for more Information. This patch implements a simple adaptive lock elision algorithm based on RTM. It enables elision for the pthread mutexes and rwlocks. The algorithm keeps track whether a mutex successfully elides or not, and stops eliding for some time when it is not. When the CPU supports RTM the elision path is automatically tried, otherwise any elision is disabled. The adaptation algorithm and its tuning is currently preliminary. The code adds some checks to the lock fast paths. Micro-benchmarks show little to no difference without RTM. This patch implements the low level "lll_" code for lock elision. Followon patches hook this into the pthread implementation Changes with the RTM mutexes: ----------------------------- Lock elision in pthreads is generally compatible with existing programs. There are some obscure exceptions, which are expected to be uncommon. See the manual for more details. - A broken program that unlocks a free lock will crash. There are ways around this with some tradeoffs (more code in hot paths) I'm still undecided on what approach to take here; have to wait for testing reports. - pthread_mutex_destroy of a lock mutex will not return EBUSY but 0. - There's also a similar situation with trylock outside the mutex, "knowing" that the mutex must be held due to some other condition. In this case an assert failure cannot be recovered. This situation is usually an existing bug in the program. - Same applies to the rwlocks. Some of the return values changes (for example there is no EDEADLK for an elided lock, unless it aborts. However when elided it will also never deadlock of course) - Timing changes, so broken programs that make assumptions about specific timing may expose already existing latent problems. Note that these broken programs will break in other situations too (loaded system, new faster hardware, compiler optimizations etc.) - Programs with non recursive mutexes that take them recursively in a thread and which would always deadlock without elision may not always see a deadlock. The deadlock will only happen on an early or delayed abort (which typically happens at some point) This only happens for mutexes not explicitely set to PTHREAD_MUTEX_NORMAL or PTHREAD_MUTEX_ADAPTIVE_NP. PTHREAD_MUTEX_NORMAL mutexes do not elide. The elision default can be set at configure time. This patch implements the basic infrastructure for elision.
2012-11-10 16:51:26 +08:00
}
#ifdef SHARED
# define INIT_SECTION ".init_array"
#else
# define INIT_SECTION ".preinit_array"
#endif
void (*const __pthread_init_array []) (int, char **, char **)
__attribute__ ((section (INIT_SECTION), aligned (sizeof (void *)))) =
{
&elision_init
};
Reference in New Issue Copy Permalink