glibc/math/libm-test-driver.c

1138 lines
36 KiB
C
Raw Normal View History

Build most libm-test support code once per type. libm-test-driver.c contains various functions used in the course of libm testing, which are built as part of each test using this machinery. Currently, these functions get built for three tests for each type (e.g. test-float, test-ifloat, test-float-finite), plus the vector function tests. All these tests are huge and thus slow to build; the output of gen-libm-test.pl totals around 40 MB across all functions. To make the individual tests built from the Makefile smaller, it makes sense to split these tests up so the tests for each function are built separately (thus, three tests for each (function, type) pair, plus vector tests built only for functions that actually have vector versions). This improves parallelism and means that if tests fail, the summary of failed tests makes it more obvious where the problem might be without needing to look in the .out files to see which functions' tests failed (though architecture maintainers still need to keep libm-test-ulps up to date to avoid spurious failures of little interest). Simply including libm-test-driver.c as-is in such individual-function tests does not work because of unused static check_* functions (those functions only being used for the types of the outputs of the function under test). It also means the common code gets built over 1000 times instead of nine (plus vector tests). To avoid that issue, this patch splits out the bulk of the libm-test-driver.c code into a separate file libm-test-support.c (with a few functions made non-static). That separate file is built only once for each floating-point type (so at present three times, or twice on architectures with long double = double). Definitions needed in both libm-test-support.c and libm-test-driver.c go in libm-test-support.h (it's possible some of those are in fact only needed in one of the two files). libm-test-driver.c keeps definitions of a limited number of variables used to configure how libm-test-support.c behaves, various macros and structures needed by individual-function tests, and the main function. This move is also consistent in spirit with the move away from test-skeleton.c having all the test support code, to a small support/test-driver.c included in individual tests with most of the code built separately. Tested for x86_64 and x86. * math/libm-test-support.c: New file. Content from math/libm-test-driver.c. * math/libm-test-support.h: Likewise. * math/libm-test-support-double.c: New file. * math/libm-test-support-float.c: Likewise. * math/libm-test-support-ldouble.c: Likewise. * math/libm-test-driver.c: Remove main comment and header includes. Include libm-test-support.h. [!_GNU_SOURCE] (_GNU_SOURCE): Do not define. (flag_test_errno): Remove static. (flag_test_exceptions): Likewise. (flag_test_finite): Likewise. (flag_test_inline): Likewise. (flag_test_mathvec): Likewise. (test_msg): Likewise. (NO_EXCEPTION): Remove. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ulp_idx): Likewise. (qtype_str): Remove static. (TEST_COND_binary32): Remove. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Remove static. (argp): Likewise. (parse_opt): Remove. (check_ulp): Likewise. (libm_test_init): Likewise. (libm_test_finish): Likewise. * math/Makefile (libm-test-support): New variable. (test-extras): Add libm-test-support files. (extra-test-objs): Likewise. (CFLAGS-libm-test-support-float.c): New variable. (CFLAGS-libm-test-support-double.c): Likewise. (CFLAGS-libm-test-support-ldouble.c): Likewise. ($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate libm-test-support objects.
2017-02-09 05:11:49 +08:00
/* Support code for testing libm functions (driver).
Copyright (C) 1997-2024 Free Software Foundation, Inc.
Move non-function-specific parts of libm-test.inc to separate file. libm-test.inc contains both test infrastructure and tests of individual functions. This patch moves the infrastructure to a separate file libm-test-driver.c. This is in preparation for splitting the tests of individual functions into separate source files, which will be processed individually by gen-libm-test.pl (so e.g. libm-test-acos.inc and auto-libm-test-out-acos will be processed by gen-libm-test.pl to produce libm-test-acos.c, and files such as test-double-acos.c will be generated by the Makefile to include appropriate headers, libm-test-driver.c and libm-test-acos.c so tests of each function get run separately). It is no doubt possible to split things up further, so that functions not depending on the type being tested only get compiled once and most of those depending on the type being tested get compiled once per type (rather than separately for variants such as inline / no-inline, and separately for each function being tested after that split), but this rearrangement as-is seems a useful incremental step towards splitting these tests by function. * math/libm-test-driver.c: New file. Based on math/libm-test.inc. * math/libm-test.inc: Move all contents, other than tests of individual functions, to libm-test-driver.c. [!FE_TONEAREST] (FE_TONEAREST): Move to libm-test-driver.c. [!FE_TOWARDZERO] (FE_TOWARDZERO): Likewise. [!FE_UPWARD] (FE_UPWARD): Likewise. [!FE_DOWNWARD] (FE_DOWNWARD): Likewise. (NO_EXCEPTION): Likewise. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ULP_IDX): Likewise. (QTYPE_STR): Likewise. (TEST_COND_binary32): Likewise. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (lit_pi_3_m_4_d): Likewise. (lit_pi_3_m_4_ln10_m_d): Likewise. (lit_pi_2_ln10_m_d): Likewise. (lit_pi_4_ln10_m_d): Likewise. (lit_pi_ln10_d): Likewise. (lit_pi_2_d): Likewise. (lit_pi_4_d): Likewise. (lit_pi): Likewise. (lit_e): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (plus_zero): Likewise. (minus_zero): Likewise. (plus_infty): Likewise. (minus_infty): Likewise. (qnan_value_pl): Likewise. (qnan_value): Likewise. (snan_value_pl): Likewise. (snan_value): Likewise. (max_value): Likewise. (min_value): Likewise. (min_subnorm_value): Likewise. (snan_value_ld): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (struct test_f_f_data): Likewise. (struct test_ff_f_data): Likewise. (struct test_fj_f_data): Likewise. (struct test_fi_f_data): Likewise. (struct test_fl_f_data): Likewise. (struct test_if_f_data): Likewise. (struct test_fff_f_data): Likewise. (struct test_fiu_M_data): Likewise. (struct test_fiu_U_data): Likewise. (struct test_c_f_data): Likewise. (struct test_f_f1_data): Likewise. (struct test_fF_f1_data): Likewise. (struct test_ffI_f1_data): Likewise. (struct test_c_c_data): Likewise. (struct test_cc_c_data): Likewise. (struct test_f_i_data): Likewise. (struct test_ff_i_data): Likewise. (struct test_f_l_data): Likewise. (struct test_f_L_data): Likewise. (struct test_fFF_11_data): Likewise. (struct test_Ff_b1_data): Likewise. (IF_ROUND_INIT_): Likewise. (IF_ROUND_INIT_FE_DOWNWARD): Likewise. (IF_ROUND_INIT_FE_TONEAREST): Likewise. (IF_ROUND_INIT_FE_TOWARDZERO): Likewise. (IF_ROUND_INIT_FE_UPWARD): Likewise. (ROUND_RESTORE_): Likewise. (ROUND_RESTORE_FE_DOWNWARD): Likewise. (ROUND_RESTORE_FE_TONEAREST): Likewise. (ROUND_RESTORE_FE_TOWARDZERO): Likewise. (ROUND_RESTORE_FE_UPWARD): Likewise. (RM_): Likewise. (RM_FE_DOWNWARD): Likewise. (RM_FE_TONEAREST): Likewise. (RM_FE_TOWARDZERO): Likewise. (RM_FE_UPWARD): Likewise. (COMMON_TEST_SETUP): Likewise. (EXTRA_OUTPUT_TEST_SETUP): Likewise. (COMMON_TEST_CLEANUP): Likewise. (EXTRA_OUTPUT_TEST_CLEANUP): Likewise. (RUN_TEST_f_f): Likewise. (RUN_TEST_LOOP_f_f): Likewise. (RUN_TEST_fp_f): Likewise. (RUN_TEST_LOOP_fp_f): Likewise. (RUN_TEST_2_f): Likewise. (RUN_TEST_LOOP_2_f): Likewise. (RUN_TEST_ff_f): Likewise. (RUN_TEST_LOOP_ff_f): Likewise. (RUN_TEST_LOOP_fj_f): Likewise. (RUN_TEST_fi_f): Likewise. (RUN_TEST_LOOP_fi_f): Likewise. (RUN_TEST_fl_f): Likewise. (RUN_TEST_LOOP_fl_f): Likewise. (RUN_TEST_if_f): Likewise. (RUN_TEST_LOOP_if_f): Likewise. (RUN_TEST_fff_f): Likewise. (RUN_TEST_LOOP_fff_f): Likewise. (RUN_TEST_fiu_M): Likewise. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (RUN_TEST_c_f): Likewise. (RUN_TEST_LOOP_c_f): Likewise. (RUN_TEST_f_f1): Likewise. (RUN_TEST_LOOP_f_f1): Likewise. (RUN_TEST_fF_f1): Likewise. (RUN_TEST_LOOP_fF_f1): Likewise. (RUN_TEST_fI_f1): Likewise. (RUN_TEST_LOOP_fI_f1): Likewise. (RUN_TEST_ffI_f1_mod8): Likewise. (RUN_TEST_LOOP_ffI_f1_mod8): Likewise. (RUN_TEST_Ff_b1): Likewise. (RUN_TEST_LOOP_Ff_b1): Likewise. (RUN_TEST_Ffp_b1): Likewise. (RUN_TEST_LOOP_Ffp_b1): Likewise. (RUN_TEST_c_c): Likewise. (RUN_TEST_LOOP_c_c): Likewise. (RUN_TEST_cc_c): Likewise. (RUN_TEST_LOOP_cc_c): Likewise. (RUN_TEST_f_i): Likewise. (RUN_TEST_LOOP_f_i): Likewise. (RUN_TEST_f_i_tg): Likewise. (RUN_TEST_LOOP_f_i_tg): Likewise. (RUN_TEST_ff_b): Likewise. (RUN_TEST_LOOP_ff_b): Likewise. (RUN_TEST_ff_i_tg): Likewise. (RUN_TEST_LOOP_ff_i_tg): Likewise. (RUN_TEST_f_b): Likewise. (RUN_TEST_LOOP_f_b): Likewise. (RUN_TEST_f_b_tg): Likewise. (RUN_TEST_LOOP_f_b_tg): Likewise. (RUN_TEST_f_l): Likewise. (RUN_TEST_LOOP_f_l): Likewise. (RUN_TEST_f_L): Likewise. (RUN_TEST_LOOP_f_L): Likewise. (RUN_TEST_fFF_11): Likewise. (RUN_TEST_LOOP_fFF_11): Likewise. (VEC_SUFF): Likewise. (STR_CONCAT): Likewise. (STR_CON3): Likewise. (HAVE_VECTOR): Likewise. (START): Likewise. (END): Likewise. (END_COMPLEX): Likewise. (ALL_RM_TEST): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Likewise. (parse_opt): Likewise. (argp): Likewise. (check_ulp): Likewise. (main): Likewise. (do_test): New function. Call tests of individual functions previously called from main.
2017-02-07 02:12:16 +08:00
This file is part of the GNU C Library.
The GNU C Library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
The GNU C Library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with the GNU C Library; if not, see
Prefer https to http for gnu.org and fsf.org URLs Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '*.po' \ ! -name 'ChangeLog*' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-09-07 13:40:42 +08:00
<https://www.gnu.org/licenses/>. */
Move non-function-specific parts of libm-test.inc to separate file. libm-test.inc contains both test infrastructure and tests of individual functions. This patch moves the infrastructure to a separate file libm-test-driver.c. This is in preparation for splitting the tests of individual functions into separate source files, which will be processed individually by gen-libm-test.pl (so e.g. libm-test-acos.inc and auto-libm-test-out-acos will be processed by gen-libm-test.pl to produce libm-test-acos.c, and files such as test-double-acos.c will be generated by the Makefile to include appropriate headers, libm-test-driver.c and libm-test-acos.c so tests of each function get run separately). It is no doubt possible to split things up further, so that functions not depending on the type being tested only get compiled once and most of those depending on the type being tested get compiled once per type (rather than separately for variants such as inline / no-inline, and separately for each function being tested after that split), but this rearrangement as-is seems a useful incremental step towards splitting these tests by function. * math/libm-test-driver.c: New file. Based on math/libm-test.inc. * math/libm-test.inc: Move all contents, other than tests of individual functions, to libm-test-driver.c. [!FE_TONEAREST] (FE_TONEAREST): Move to libm-test-driver.c. [!FE_TOWARDZERO] (FE_TOWARDZERO): Likewise. [!FE_UPWARD] (FE_UPWARD): Likewise. [!FE_DOWNWARD] (FE_DOWNWARD): Likewise. (NO_EXCEPTION): Likewise. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ULP_IDX): Likewise. (QTYPE_STR): Likewise. (TEST_COND_binary32): Likewise. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (lit_pi_3_m_4_d): Likewise. (lit_pi_3_m_4_ln10_m_d): Likewise. (lit_pi_2_ln10_m_d): Likewise. (lit_pi_4_ln10_m_d): Likewise. (lit_pi_ln10_d): Likewise. (lit_pi_2_d): Likewise. (lit_pi_4_d): Likewise. (lit_pi): Likewise. (lit_e): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (plus_zero): Likewise. (minus_zero): Likewise. (plus_infty): Likewise. (minus_infty): Likewise. (qnan_value_pl): Likewise. (qnan_value): Likewise. (snan_value_pl): Likewise. (snan_value): Likewise. (max_value): Likewise. (min_value): Likewise. (min_subnorm_value): Likewise. (snan_value_ld): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (struct test_f_f_data): Likewise. (struct test_ff_f_data): Likewise. (struct test_fj_f_data): Likewise. (struct test_fi_f_data): Likewise. (struct test_fl_f_data): Likewise. (struct test_if_f_data): Likewise. (struct test_fff_f_data): Likewise. (struct test_fiu_M_data): Likewise. (struct test_fiu_U_data): Likewise. (struct test_c_f_data): Likewise. (struct test_f_f1_data): Likewise. (struct test_fF_f1_data): Likewise. (struct test_ffI_f1_data): Likewise. (struct test_c_c_data): Likewise. (struct test_cc_c_data): Likewise. (struct test_f_i_data): Likewise. (struct test_ff_i_data): Likewise. (struct test_f_l_data): Likewise. (struct test_f_L_data): Likewise. (struct test_fFF_11_data): Likewise. (struct test_Ff_b1_data): Likewise. (IF_ROUND_INIT_): Likewise. (IF_ROUND_INIT_FE_DOWNWARD): Likewise. (IF_ROUND_INIT_FE_TONEAREST): Likewise. (IF_ROUND_INIT_FE_TOWARDZERO): Likewise. (IF_ROUND_INIT_FE_UPWARD): Likewise. (ROUND_RESTORE_): Likewise. (ROUND_RESTORE_FE_DOWNWARD): Likewise. (ROUND_RESTORE_FE_TONEAREST): Likewise. (ROUND_RESTORE_FE_TOWARDZERO): Likewise. (ROUND_RESTORE_FE_UPWARD): Likewise. (RM_): Likewise. (RM_FE_DOWNWARD): Likewise. (RM_FE_TONEAREST): Likewise. (RM_FE_TOWARDZERO): Likewise. (RM_FE_UPWARD): Likewise. (COMMON_TEST_SETUP): Likewise. (EXTRA_OUTPUT_TEST_SETUP): Likewise. (COMMON_TEST_CLEANUP): Likewise. (EXTRA_OUTPUT_TEST_CLEANUP): Likewise. (RUN_TEST_f_f): Likewise. (RUN_TEST_LOOP_f_f): Likewise. (RUN_TEST_fp_f): Likewise. (RUN_TEST_LOOP_fp_f): Likewise. (RUN_TEST_2_f): Likewise. (RUN_TEST_LOOP_2_f): Likewise. (RUN_TEST_ff_f): Likewise. (RUN_TEST_LOOP_ff_f): Likewise. (RUN_TEST_LOOP_fj_f): Likewise. (RUN_TEST_fi_f): Likewise. (RUN_TEST_LOOP_fi_f): Likewise. (RUN_TEST_fl_f): Likewise. (RUN_TEST_LOOP_fl_f): Likewise. (RUN_TEST_if_f): Likewise. (RUN_TEST_LOOP_if_f): Likewise. (RUN_TEST_fff_f): Likewise. (RUN_TEST_LOOP_fff_f): Likewise. (RUN_TEST_fiu_M): Likewise. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (RUN_TEST_c_f): Likewise. (RUN_TEST_LOOP_c_f): Likewise. (RUN_TEST_f_f1): Likewise. (RUN_TEST_LOOP_f_f1): Likewise. (RUN_TEST_fF_f1): Likewise. (RUN_TEST_LOOP_fF_f1): Likewise. (RUN_TEST_fI_f1): Likewise. (RUN_TEST_LOOP_fI_f1): Likewise. (RUN_TEST_ffI_f1_mod8): Likewise. (RUN_TEST_LOOP_ffI_f1_mod8): Likewise. (RUN_TEST_Ff_b1): Likewise. (RUN_TEST_LOOP_Ff_b1): Likewise. (RUN_TEST_Ffp_b1): Likewise. (RUN_TEST_LOOP_Ffp_b1): Likewise. (RUN_TEST_c_c): Likewise. (RUN_TEST_LOOP_c_c): Likewise. (RUN_TEST_cc_c): Likewise. (RUN_TEST_LOOP_cc_c): Likewise. (RUN_TEST_f_i): Likewise. (RUN_TEST_LOOP_f_i): Likewise. (RUN_TEST_f_i_tg): Likewise. (RUN_TEST_LOOP_f_i_tg): Likewise. (RUN_TEST_ff_b): Likewise. (RUN_TEST_LOOP_ff_b): Likewise. (RUN_TEST_ff_i_tg): Likewise. (RUN_TEST_LOOP_ff_i_tg): Likewise. (RUN_TEST_f_b): Likewise. (RUN_TEST_LOOP_f_b): Likewise. (RUN_TEST_f_b_tg): Likewise. (RUN_TEST_LOOP_f_b_tg): Likewise. (RUN_TEST_f_l): Likewise. (RUN_TEST_LOOP_f_l): Likewise. (RUN_TEST_f_L): Likewise. (RUN_TEST_LOOP_f_L): Likewise. (RUN_TEST_fFF_11): Likewise. (RUN_TEST_LOOP_fFF_11): Likewise. (VEC_SUFF): Likewise. (STR_CONCAT): Likewise. (STR_CON3): Likewise. (HAVE_VECTOR): Likewise. (START): Likewise. (END): Likewise. (END_COMPLEX): Likewise. (ALL_RM_TEST): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Likewise. (parse_opt): Likewise. (argp): Likewise. (check_ulp): Likewise. (main): Likewise. (do_test): New function. Call tests of individual functions previously called from main.
2017-02-07 02:12:16 +08:00
Build most libm-test support code once per type. libm-test-driver.c contains various functions used in the course of libm testing, which are built as part of each test using this machinery. Currently, these functions get built for three tests for each type (e.g. test-float, test-ifloat, test-float-finite), plus the vector function tests. All these tests are huge and thus slow to build; the output of gen-libm-test.pl totals around 40 MB across all functions. To make the individual tests built from the Makefile smaller, it makes sense to split these tests up so the tests for each function are built separately (thus, three tests for each (function, type) pair, plus vector tests built only for functions that actually have vector versions). This improves parallelism and means that if tests fail, the summary of failed tests makes it more obvious where the problem might be without needing to look in the .out files to see which functions' tests failed (though architecture maintainers still need to keep libm-test-ulps up to date to avoid spurious failures of little interest). Simply including libm-test-driver.c as-is in such individual-function tests does not work because of unused static check_* functions (those functions only being used for the types of the outputs of the function under test). It also means the common code gets built over 1000 times instead of nine (plus vector tests). To avoid that issue, this patch splits out the bulk of the libm-test-driver.c code into a separate file libm-test-support.c (with a few functions made non-static). That separate file is built only once for each floating-point type (so at present three times, or twice on architectures with long double = double). Definitions needed in both libm-test-support.c and libm-test-driver.c go in libm-test-support.h (it's possible some of those are in fact only needed in one of the two files). libm-test-driver.c keeps definitions of a limited number of variables used to configure how libm-test-support.c behaves, various macros and structures needed by individual-function tests, and the main function. This move is also consistent in spirit with the move away from test-skeleton.c having all the test support code, to a small support/test-driver.c included in individual tests with most of the code built separately. Tested for x86_64 and x86. * math/libm-test-support.c: New file. Content from math/libm-test-driver.c. * math/libm-test-support.h: Likewise. * math/libm-test-support-double.c: New file. * math/libm-test-support-float.c: Likewise. * math/libm-test-support-ldouble.c: Likewise. * math/libm-test-driver.c: Remove main comment and header includes. Include libm-test-support.h. [!_GNU_SOURCE] (_GNU_SOURCE): Do not define. (flag_test_errno): Remove static. (flag_test_exceptions): Likewise. (flag_test_finite): Likewise. (flag_test_inline): Likewise. (flag_test_mathvec): Likewise. (test_msg): Likewise. (NO_EXCEPTION): Remove. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ulp_idx): Likewise. (qtype_str): Remove static. (TEST_COND_binary32): Remove. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Remove static. (argp): Likewise. (parse_opt): Remove. (check_ulp): Likewise. (libm_test_init): Likewise. (libm_test_finish): Likewise. * math/Makefile (libm-test-support): New variable. (test-extras): Add libm-test-support files. (extra-test-objs): Likewise. (CFLAGS-libm-test-support-float.c): New variable. (CFLAGS-libm-test-support-double.c): Likewise. (CFLAGS-libm-test-support-ldouble.c): Likewise. ($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate libm-test-support objects.
2017-02-09 05:11:49 +08:00
#include "libm-test-support.h"
Move non-function-specific parts of libm-test.inc to separate file. libm-test.inc contains both test infrastructure and tests of individual functions. This patch moves the infrastructure to a separate file libm-test-driver.c. This is in preparation for splitting the tests of individual functions into separate source files, which will be processed individually by gen-libm-test.pl (so e.g. libm-test-acos.inc and auto-libm-test-out-acos will be processed by gen-libm-test.pl to produce libm-test-acos.c, and files such as test-double-acos.c will be generated by the Makefile to include appropriate headers, libm-test-driver.c and libm-test-acos.c so tests of each function get run separately). It is no doubt possible to split things up further, so that functions not depending on the type being tested only get compiled once and most of those depending on the type being tested get compiled once per type (rather than separately for variants such as inline / no-inline, and separately for each function being tested after that split), but this rearrangement as-is seems a useful incremental step towards splitting these tests by function. * math/libm-test-driver.c: New file. Based on math/libm-test.inc. * math/libm-test.inc: Move all contents, other than tests of individual functions, to libm-test-driver.c. [!FE_TONEAREST] (FE_TONEAREST): Move to libm-test-driver.c. [!FE_TOWARDZERO] (FE_TOWARDZERO): Likewise. [!FE_UPWARD] (FE_UPWARD): Likewise. [!FE_DOWNWARD] (FE_DOWNWARD): Likewise. (NO_EXCEPTION): Likewise. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ULP_IDX): Likewise. (QTYPE_STR): Likewise. (TEST_COND_binary32): Likewise. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (lit_pi_3_m_4_d): Likewise. (lit_pi_3_m_4_ln10_m_d): Likewise. (lit_pi_2_ln10_m_d): Likewise. (lit_pi_4_ln10_m_d): Likewise. (lit_pi_ln10_d): Likewise. (lit_pi_2_d): Likewise. (lit_pi_4_d): Likewise. (lit_pi): Likewise. (lit_e): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (plus_zero): Likewise. (minus_zero): Likewise. (plus_infty): Likewise. (minus_infty): Likewise. (qnan_value_pl): Likewise. (qnan_value): Likewise. (snan_value_pl): Likewise. (snan_value): Likewise. (max_value): Likewise. (min_value): Likewise. (min_subnorm_value): Likewise. (snan_value_ld): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (struct test_f_f_data): Likewise. (struct test_ff_f_data): Likewise. (struct test_fj_f_data): Likewise. (struct test_fi_f_data): Likewise. (struct test_fl_f_data): Likewise. (struct test_if_f_data): Likewise. (struct test_fff_f_data): Likewise. (struct test_fiu_M_data): Likewise. (struct test_fiu_U_data): Likewise. (struct test_c_f_data): Likewise. (struct test_f_f1_data): Likewise. (struct test_fF_f1_data): Likewise. (struct test_ffI_f1_data): Likewise. (struct test_c_c_data): Likewise. (struct test_cc_c_data): Likewise. (struct test_f_i_data): Likewise. (struct test_ff_i_data): Likewise. (struct test_f_l_data): Likewise. (struct test_f_L_data): Likewise. (struct test_fFF_11_data): Likewise. (struct test_Ff_b1_data): Likewise. (IF_ROUND_INIT_): Likewise. (IF_ROUND_INIT_FE_DOWNWARD): Likewise. (IF_ROUND_INIT_FE_TONEAREST): Likewise. (IF_ROUND_INIT_FE_TOWARDZERO): Likewise. (IF_ROUND_INIT_FE_UPWARD): Likewise. (ROUND_RESTORE_): Likewise. (ROUND_RESTORE_FE_DOWNWARD): Likewise. (ROUND_RESTORE_FE_TONEAREST): Likewise. (ROUND_RESTORE_FE_TOWARDZERO): Likewise. (ROUND_RESTORE_FE_UPWARD): Likewise. (RM_): Likewise. (RM_FE_DOWNWARD): Likewise. (RM_FE_TONEAREST): Likewise. (RM_FE_TOWARDZERO): Likewise. (RM_FE_UPWARD): Likewise. (COMMON_TEST_SETUP): Likewise. (EXTRA_OUTPUT_TEST_SETUP): Likewise. (COMMON_TEST_CLEANUP): Likewise. (EXTRA_OUTPUT_TEST_CLEANUP): Likewise. (RUN_TEST_f_f): Likewise. (RUN_TEST_LOOP_f_f): Likewise. (RUN_TEST_fp_f): Likewise. (RUN_TEST_LOOP_fp_f): Likewise. (RUN_TEST_2_f): Likewise. (RUN_TEST_LOOP_2_f): Likewise. (RUN_TEST_ff_f): Likewise. (RUN_TEST_LOOP_ff_f): Likewise. (RUN_TEST_LOOP_fj_f): Likewise. (RUN_TEST_fi_f): Likewise. (RUN_TEST_LOOP_fi_f): Likewise. (RUN_TEST_fl_f): Likewise. (RUN_TEST_LOOP_fl_f): Likewise. (RUN_TEST_if_f): Likewise. (RUN_TEST_LOOP_if_f): Likewise. (RUN_TEST_fff_f): Likewise. (RUN_TEST_LOOP_fff_f): Likewise. (RUN_TEST_fiu_M): Likewise. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (RUN_TEST_c_f): Likewise. (RUN_TEST_LOOP_c_f): Likewise. (RUN_TEST_f_f1): Likewise. (RUN_TEST_LOOP_f_f1): Likewise. (RUN_TEST_fF_f1): Likewise. (RUN_TEST_LOOP_fF_f1): Likewise. (RUN_TEST_fI_f1): Likewise. (RUN_TEST_LOOP_fI_f1): Likewise. (RUN_TEST_ffI_f1_mod8): Likewise. (RUN_TEST_LOOP_ffI_f1_mod8): Likewise. (RUN_TEST_Ff_b1): Likewise. (RUN_TEST_LOOP_Ff_b1): Likewise. (RUN_TEST_Ffp_b1): Likewise. (RUN_TEST_LOOP_Ffp_b1): Likewise. (RUN_TEST_c_c): Likewise. (RUN_TEST_LOOP_c_c): Likewise. (RUN_TEST_cc_c): Likewise. (RUN_TEST_LOOP_cc_c): Likewise. (RUN_TEST_f_i): Likewise. (RUN_TEST_LOOP_f_i): Likewise. (RUN_TEST_f_i_tg): Likewise. (RUN_TEST_LOOP_f_i_tg): Likewise. (RUN_TEST_ff_b): Likewise. (RUN_TEST_LOOP_ff_b): Likewise. (RUN_TEST_ff_i_tg): Likewise. (RUN_TEST_LOOP_ff_i_tg): Likewise. (RUN_TEST_f_b): Likewise. (RUN_TEST_LOOP_f_b): Likewise. (RUN_TEST_f_b_tg): Likewise. (RUN_TEST_LOOP_f_b_tg): Likewise. (RUN_TEST_f_l): Likewise. (RUN_TEST_LOOP_f_l): Likewise. (RUN_TEST_f_L): Likewise. (RUN_TEST_LOOP_f_L): Likewise. (RUN_TEST_fFF_11): Likewise. (RUN_TEST_LOOP_fFF_11): Likewise. (VEC_SUFF): Likewise. (STR_CONCAT): Likewise. (STR_CON3): Likewise. (HAVE_VECTOR): Likewise. (START): Likewise. (END): Likewise. (END_COMPLEX): Likewise. (ALL_RM_TEST): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Likewise. (parse_opt): Likewise. (argp): Likewise. (check_ulp): Likewise. (main): Likewise. (do_test): New function. Call tests of individual functions previously called from main.
2017-02-07 02:12:16 +08:00
#include <math-tests-arch.h>
Refactor some code in libm-test-driver.c. Splitting libm tests by function will mean about a thousand such tests built separately instead of the present nine (plus vector variants). When this is done, it's desirable to avoid needing to build all the test infrastructure so many times. Also, simply including libm-test-driver.c as-is into per-function tests doesn't actually work, because the various check_* functions are not used by all tests and so generate errors for unused static functions. Although some pieces of infrastructure depend on the type being tested while others don't, building once per type seems the simplest approach. This patch makes changes to libm-test-driver.c in preparation for that. Various cases where functions directly use macros such as TEST_ERRNO (that may vary depending on things other than the type under test) are changed to use variables initialized using those macros, while most of the code in main is moved out to functions libm_test_init and libm_test_fini. The idea is that all the functions in libm-test-driver.c will be moved out in a subsequent patch to be built once per type (and be no longer static when they are used from per-function tests), while libm-test-driver.c remains containing definitions of various variables (no longer static, of course, because they'll be used in the per-type code) and the main function. Declarations / macros relevant to both the once-per-type code and the per-function tests will go in a shared header. Tested for x86_64. * math/libm-test-driver.c (flag_test_errno): New variable. (flag_test_exceptions): Likewise. (flag_test_finite): Likewise. (flag_test_inline): Likewise. (flag_test_mathvec): Likewise. (test_msg): Likewise. (ulp_idx): Likewise. (qtype_str): Likewise. (ULP_IDX): Remove macro. (QTYPE_STR): Likewise. (find_ulps): Use ulp_idx not ULP_IDX. (print_function_ulps): Use qtype_str, printed with %s, not QTYPE_STR, printed with concatentation to format string. (print_complex_function_ulps): Likewise. (test_exceptions): Use flag_test_exceptions not TEST_EXCEPTIONS. (test_errno): Use flag_test_errno not TEST_ERRNO. (enable_test): Use flag_test_inline, flag_test_finite and flag_test_mathvec instead of TEST_INLINE, TEST_FINITE and TEST_MATHVEC. (libm_test_init): New function. Factored out of main. (libm_test_finish): Likewise. (main): Call libm_test_init and libm_test_finish and move most code to those functions.
2017-02-07 07:23:54 +08:00
/* Flags set by the including file. */
Build most libm-test support code once per type. libm-test-driver.c contains various functions used in the course of libm testing, which are built as part of each test using this machinery. Currently, these functions get built for three tests for each type (e.g. test-float, test-ifloat, test-float-finite), plus the vector function tests. All these tests are huge and thus slow to build; the output of gen-libm-test.pl totals around 40 MB across all functions. To make the individual tests built from the Makefile smaller, it makes sense to split these tests up so the tests for each function are built separately (thus, three tests for each (function, type) pair, plus vector tests built only for functions that actually have vector versions). This improves parallelism and means that if tests fail, the summary of failed tests makes it more obvious where the problem might be without needing to look in the .out files to see which functions' tests failed (though architecture maintainers still need to keep libm-test-ulps up to date to avoid spurious failures of little interest). Simply including libm-test-driver.c as-is in such individual-function tests does not work because of unused static check_* functions (those functions only being used for the types of the outputs of the function under test). It also means the common code gets built over 1000 times instead of nine (plus vector tests). To avoid that issue, this patch splits out the bulk of the libm-test-driver.c code into a separate file libm-test-support.c (with a few functions made non-static). That separate file is built only once for each floating-point type (so at present three times, or twice on architectures with long double = double). Definitions needed in both libm-test-support.c and libm-test-driver.c go in libm-test-support.h (it's possible some of those are in fact only needed in one of the two files). libm-test-driver.c keeps definitions of a limited number of variables used to configure how libm-test-support.c behaves, various macros and structures needed by individual-function tests, and the main function. This move is also consistent in spirit with the move away from test-skeleton.c having all the test support code, to a small support/test-driver.c included in individual tests with most of the code built separately. Tested for x86_64 and x86. * math/libm-test-support.c: New file. Content from math/libm-test-driver.c. * math/libm-test-support.h: Likewise. * math/libm-test-support-double.c: New file. * math/libm-test-support-float.c: Likewise. * math/libm-test-support-ldouble.c: Likewise. * math/libm-test-driver.c: Remove main comment and header includes. Include libm-test-support.h. [!_GNU_SOURCE] (_GNU_SOURCE): Do not define. (flag_test_errno): Remove static. (flag_test_exceptions): Likewise. (flag_test_finite): Likewise. (flag_test_inline): Likewise. (flag_test_mathvec): Likewise. (test_msg): Likewise. (NO_EXCEPTION): Remove. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ulp_idx): Likewise. (qtype_str): Remove static. (TEST_COND_binary32): Remove. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Remove static. (argp): Likewise. (parse_opt): Remove. (check_ulp): Likewise. (libm_test_init): Likewise. (libm_test_finish): Likewise. * math/Makefile (libm-test-support): New variable. (test-extras): Add libm-test-support files. (extra-test-objs): Likewise. (CFLAGS-libm-test-support-float.c): New variable. (CFLAGS-libm-test-support-double.c): Likewise. (CFLAGS-libm-test-support-ldouble.c): Likewise. ($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate libm-test-support objects.
2017-02-09 05:11:49 +08:00
const int flag_test_errno = TEST_ERRNO;
const int flag_test_exceptions = TEST_EXCEPTIONS;
const int flag_test_mathvec = TEST_MATHVEC;
Refactor some code in libm-test-driver.c. Splitting libm tests by function will mean about a thousand such tests built separately instead of the present nine (plus vector variants). When this is done, it's desirable to avoid needing to build all the test infrastructure so many times. Also, simply including libm-test-driver.c as-is into per-function tests doesn't actually work, because the various check_* functions are not used by all tests and so generate errors for unused static functions. Although some pieces of infrastructure depend on the type being tested while others don't, building once per type seems the simplest approach. This patch makes changes to libm-test-driver.c in preparation for that. Various cases where functions directly use macros such as TEST_ERRNO (that may vary depending on things other than the type under test) are changed to use variables initialized using those macros, while most of the code in main is moved out to functions libm_test_init and libm_test_fini. The idea is that all the functions in libm-test-driver.c will be moved out in a subsequent patch to be built once per type (and be no longer static when they are used from per-function tests), while libm-test-driver.c remains containing definitions of various variables (no longer static, of course, because they'll be used in the per-type code) and the main function. Declarations / macros relevant to both the once-per-type code and the per-function tests will go in a shared header. Tested for x86_64. * math/libm-test-driver.c (flag_test_errno): New variable. (flag_test_exceptions): Likewise. (flag_test_finite): Likewise. (flag_test_inline): Likewise. (flag_test_mathvec): Likewise. (test_msg): Likewise. (ulp_idx): Likewise. (qtype_str): Likewise. (ULP_IDX): Remove macro. (QTYPE_STR): Likewise. (find_ulps): Use ulp_idx not ULP_IDX. (print_function_ulps): Use qtype_str, printed with %s, not QTYPE_STR, printed with concatentation to format string. (print_complex_function_ulps): Likewise. (test_exceptions): Use flag_test_exceptions not TEST_EXCEPTIONS. (test_errno): Use flag_test_errno not TEST_ERRNO. (enable_test): Use flag_test_inline, flag_test_finite and flag_test_mathvec instead of TEST_INLINE, TEST_FINITE and TEST_MATHVEC. (libm_test_init): New function. Factored out of main. (libm_test_finish): Likewise. (main): Call libm_test_init and libm_test_finish and move most code to those functions.
2017-02-07 07:23:54 +08:00
#if TEST_NARROW
const int snan_tests_arg = SNAN_TESTS (ARG_FLOAT);
#else
const int snan_tests_arg = SNAN_TESTS (FLOAT);
#endif
Move libm-test TEST_MSG definitions to libm-test-driver.c. Various files using the libm-test infrastructure define a TEST_MSG macro with an informal description of the tests being run. This patch moves this macro to libm-test-driver.c (the definition depending on other macros already defined), so files specific to (type, choice of whether to test inline functions or finite-math-only functions, vector length) no longer need to define it. This is in preparation for replacing files such as test-float.c with per-function test-float-<func>.c etc. automatically generated in the build directory when tests are run. Tested for x86_64. * math/libm-test-driver.c (STRX): New macro. (STR): Likewise. (STR_FLOAT): Likewise. (STR_VEC_LEN): Likewise. (TEST_MSG): Likewise. Define here instead of expecting to be defined by including file. * math/test-double-finite.c (TEST_MSG): Remove macro. * math/test-double-vlen2.h (TEST_MSG): Likewise. * math/test-double-vlen4.h (TEST_MSG): Likewise. * math/test-double-vlen8.h (TEST_MSG): Likewise. * math/test-double.c (TEST_MSG): Likewise. * math/test-float-finite.c (TEST_MSG): Likewise. * math/test-float-vlen16.h (TEST_MSG): Likewise. * math/test-float-vlen4.h (TEST_MSG): Likewise. * math/test-float-vlen8.h (TEST_MSG): Likewise. * math/test-float.c (TEST_MSG): Likewise. * math/test-idouble.c (TEST_MSG): Likewise. * math/test-ifloat.c (TEST_MSG): Likewise. * math/test-ildouble.c (TEST_MSG): Likewise. * math/test-ldouble-finite.c (TEST_MSG): Likewise. * math/test-ldouble.c (TEST_MSG): Likewise.
2017-02-07 07:07:22 +08:00
#define STRX(x) #x
#define STR(x) STRX (x)
#define STR_FLOAT STR (FLOAT)
Add test infrastructure for narrowing libm functions. This patch continues preparations for adding TS 18661-1 narrowing libm functions by adding the required testsuite infrastructure to test such functions through the libm-test infrastructure. That infrastructure is based around testing for a single type, FLOAT. For the narrowing functions, FLOAT, the "main" type for testing, is the function return type; the argument type is ARG_FLOAT. This is consistent with how the code built once for each type, libm-test-support.c, depends on FLOAT for such things as calculating ulps errors in results but can already handle different argument types (pointers, integers, long double for nexttoward). Makefile machinery is added to handle building tests for all pairs of types for which there are narrowing functions (as with non-narrowing functions, aliases are tested just the same as the functions they alias). gen-auto-libm-tests gains a --narrow option for building outputs for narrowing functions (so narrowing sqrt and fma will share the same inputs as non-narrowing, but gen-auto-libm-tests will be run with and without that option to generate different output files). In the narrowing case, the auto-libm-test-out-narrow-* files include annotations for each test about what properties ARG_FLOAT must have to be able to represent all the inputs for that test; those annotations result in calls to the TEST_COND_arg_fmt macro. gen-libm-test.pl has some minor updates to handle narrowing tests (for example, arguments in such tests must be surrounded by ARG_LIT calls instead of LIT calls). Various new macros are added to the C test support code (for example, sNaN initializers need to be properly typed, so arg_snan_value is added; other such arg_* macros are added as it seems cleanest to do so, though some are not strictly required). Special-casing of the ibm128 format to allow for its limitations is adjusted to handle it as the argument format as well as as the result format; thus, the tests of the new functions allow nonzero ulps only in the case where ibm128 is the argument format, as otherwise the functions correspond to fully-defined IEEE operations. The ulps in question appear as e.g. 'Function: "add_ldouble"' in libm-test-ulps (with 1ulp errors then listed for double and float for that function in powerpc); no support is added to generate corresponding faddl / daddl ulps listings in the ulps table in the manual. For the previous patch, I noted the need to avoid spurious macro expansions of identifiers such as "add". A test test-narrow-macros.c is added to verify such macro expansions are successfully avoided, and there is also a -mlong-double-64 version of that test for ldbl-opt. This test is set up to cover the full set of relevant identifiers from the start rather than adding functions one at a time as each function group is added. Tested for x86_64 (this patch in isolation, as well as testing for various configurations in conjunction with the actual addition of "add" functions). * math/Makefile (test-type-pairs): New variable. (test-type-pairs-f64xf128-yes): Likewise. (tests): Add test-narrow-macros. (libm-test-funcs-narrow): New variable. (libm-test-c-narrow): Likewise. (generated): Add $(libm-test-c-narrow). (libm-tests-base-narrow): New variable. (libm-tests-narrow): Likewise. (libm-tests): Add $(libm-tests-narrow). (libm-tests-for-type): Handle $(libm-tests-narrow). (libm-test-c-narrow-obj): New variable. ($(libm-test-c-narrow-obj)): New rule. ($(foreach t,$(libm-tests-narrow),$(objpfx)$(t).c)): Likewise. ($(foreach f,$(libm-test-funcs-narrow),$(objpfx)$(o)-$(f).o)): Use $(o-iterator) to set dependencies and CFLAGS. * math/gen-auto-libm-tests.c: Document use for narrowing functions. (output_for_one_input_case): Take argument NARROW. (generate_output): Likewise. Update call to output_for_one_input_case. (main): Take --narrow option. Update call to generate_output. * math/gen-libm-test.pl (_apply_lit): Take macro name as argument. (apply_lit): Update call to _apply_lit. (apply_arglit): New function. (parse_args): Handle "a" arguments. (parse_auto_input): Handle format names using ":". * math/README.libm-test: Document "a" parameter type. * math/libm-test-support.h (ARG_TYPE_MIN): New macro. (ARG_TYPE_TRUE_MIN): Likewise. (ARG_TYPE_MAX): Likwise. (ARG_MIN_EXP): Likewise. (ARG_MAX_EXP): Likewise. (ARG_MANT_DIG): Likewise. (TEST_COND_arg_ibm128): Likewise. (TEST_COND_ibm128_libgcc): Define conditional on [ARG_FLOAT]. (TEST_COND_arg_fmt): New macro. (init_max_error): Update prototype. * math/libm-test-support.c (test_ibm128): New variable. (init_max_error): Take argument testing_ibm128 and set test_ibm128 instead of using [TEST_COND_ibm128] conditional. (test_exceptions): Use test_ibm128 instead of TEST_COND_ibm128. * math/libm-test-driver.c (STR_ARG_FLOAT): New macro. [TEST_NARROW] (TEST_MSG): New definition. (arg_plus_zero): New macro. (arg_minus_zero): Likewise. (arg_plus_infty): Likewise. (arg_minus_infty): Likewise. (arg_qnan_value_pl): Likewise. (arg_qnan_value): Likewise. (arg_snan_value_pl): Likewise. (arg_snan_value): Likewise. (arg_max_value): Likewise. (arg_min_value): Likewise. (arg_min_subnorm_value): Likewise. [ARG_FLOAT] (struct test_aa_f_data): New struct type. (RUN_TEST_LOOP_aa_f): New macro. (TEST_SUFF): New macro. (TEST_SUFF_STR): Likewise. [!TEST_MATHVEC] (VEC_SUFF): Don't define. (TEST_COND_any_ibm128): New macro. (START): Use TEST_SUFF and TEST_SUFF_STR in initializer for this_func. Update call to init_max_error. * math/test-double.h (FUNC_NARROW_PREFIX): New macro. * math/test-float.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float128.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-math-scalar.h (TEST_NARROW): Likewise. * math/test-math-vector.h (TEST_NARROW): Likewise. * math/test-arg-double.h: New file. * math/test-arg-float128.h: Likewise. * math/test-arg-float32x.h: Likewise. * math/test-arg-float64.h: Likewise. * math/test-arg-float64x.h: Likewise. * math/test-arg-ldouble.h: Likewise. * math/test-math-narrow.h: Likewise. * math/test-narrow-macros.c: Likewise. * sysdeps/ieee754/ldbl-opt/test-narrow-macros-ldbl-64.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (tests): Add test-narrow-macros-ldbl-64. (CFLAGS-test-narrow-macros-ldbl-64.c): New variable.
2018-02-10 05:55:48 +08:00
#define STR_ARG_FLOAT STR (ARG_FLOAT)
Move libm-test TEST_MSG definitions to libm-test-driver.c. Various files using the libm-test infrastructure define a TEST_MSG macro with an informal description of the tests being run. This patch moves this macro to libm-test-driver.c (the definition depending on other macros already defined), so files specific to (type, choice of whether to test inline functions or finite-math-only functions, vector length) no longer need to define it. This is in preparation for replacing files such as test-float.c with per-function test-float-<func>.c etc. automatically generated in the build directory when tests are run. Tested for x86_64. * math/libm-test-driver.c (STRX): New macro. (STR): Likewise. (STR_FLOAT): Likewise. (STR_VEC_LEN): Likewise. (TEST_MSG): Likewise. Define here instead of expecting to be defined by including file. * math/test-double-finite.c (TEST_MSG): Remove macro. * math/test-double-vlen2.h (TEST_MSG): Likewise. * math/test-double-vlen4.h (TEST_MSG): Likewise. * math/test-double-vlen8.h (TEST_MSG): Likewise. * math/test-double.c (TEST_MSG): Likewise. * math/test-float-finite.c (TEST_MSG): Likewise. * math/test-float-vlen16.h (TEST_MSG): Likewise. * math/test-float-vlen4.h (TEST_MSG): Likewise. * math/test-float-vlen8.h (TEST_MSG): Likewise. * math/test-float.c (TEST_MSG): Likewise. * math/test-idouble.c (TEST_MSG): Likewise. * math/test-ifloat.c (TEST_MSG): Likewise. * math/test-ildouble.c (TEST_MSG): Likewise. * math/test-ldouble-finite.c (TEST_MSG): Likewise. * math/test-ldouble.c (TEST_MSG): Likewise.
2017-02-07 07:07:22 +08:00
#define STR_VEC_LEN STR (VEC_LEN)
/* Informal description of the functions being tested. */
#if TEST_MATHVEC
# define TEST_MSG "testing " STR_FLOAT " (vector length " STR_VEC_LEN ")\n"
Add test infrastructure for narrowing libm functions. This patch continues preparations for adding TS 18661-1 narrowing libm functions by adding the required testsuite infrastructure to test such functions through the libm-test infrastructure. That infrastructure is based around testing for a single type, FLOAT. For the narrowing functions, FLOAT, the "main" type for testing, is the function return type; the argument type is ARG_FLOAT. This is consistent with how the code built once for each type, libm-test-support.c, depends on FLOAT for such things as calculating ulps errors in results but can already handle different argument types (pointers, integers, long double for nexttoward). Makefile machinery is added to handle building tests for all pairs of types for which there are narrowing functions (as with non-narrowing functions, aliases are tested just the same as the functions they alias). gen-auto-libm-tests gains a --narrow option for building outputs for narrowing functions (so narrowing sqrt and fma will share the same inputs as non-narrowing, but gen-auto-libm-tests will be run with and without that option to generate different output files). In the narrowing case, the auto-libm-test-out-narrow-* files include annotations for each test about what properties ARG_FLOAT must have to be able to represent all the inputs for that test; those annotations result in calls to the TEST_COND_arg_fmt macro. gen-libm-test.pl has some minor updates to handle narrowing tests (for example, arguments in such tests must be surrounded by ARG_LIT calls instead of LIT calls). Various new macros are added to the C test support code (for example, sNaN initializers need to be properly typed, so arg_snan_value is added; other such arg_* macros are added as it seems cleanest to do so, though some are not strictly required). Special-casing of the ibm128 format to allow for its limitations is adjusted to handle it as the argument format as well as as the result format; thus, the tests of the new functions allow nonzero ulps only in the case where ibm128 is the argument format, as otherwise the functions correspond to fully-defined IEEE operations. The ulps in question appear as e.g. 'Function: "add_ldouble"' in libm-test-ulps (with 1ulp errors then listed for double and float for that function in powerpc); no support is added to generate corresponding faddl / daddl ulps listings in the ulps table in the manual. For the previous patch, I noted the need to avoid spurious macro expansions of identifiers such as "add". A test test-narrow-macros.c is added to verify such macro expansions are successfully avoided, and there is also a -mlong-double-64 version of that test for ldbl-opt. This test is set up to cover the full set of relevant identifiers from the start rather than adding functions one at a time as each function group is added. Tested for x86_64 (this patch in isolation, as well as testing for various configurations in conjunction with the actual addition of "add" functions). * math/Makefile (test-type-pairs): New variable. (test-type-pairs-f64xf128-yes): Likewise. (tests): Add test-narrow-macros. (libm-test-funcs-narrow): New variable. (libm-test-c-narrow): Likewise. (generated): Add $(libm-test-c-narrow). (libm-tests-base-narrow): New variable. (libm-tests-narrow): Likewise. (libm-tests): Add $(libm-tests-narrow). (libm-tests-for-type): Handle $(libm-tests-narrow). (libm-test-c-narrow-obj): New variable. ($(libm-test-c-narrow-obj)): New rule. ($(foreach t,$(libm-tests-narrow),$(objpfx)$(t).c)): Likewise. ($(foreach f,$(libm-test-funcs-narrow),$(objpfx)$(o)-$(f).o)): Use $(o-iterator) to set dependencies and CFLAGS. * math/gen-auto-libm-tests.c: Document use for narrowing functions. (output_for_one_input_case): Take argument NARROW. (generate_output): Likewise. Update call to output_for_one_input_case. (main): Take --narrow option. Update call to generate_output. * math/gen-libm-test.pl (_apply_lit): Take macro name as argument. (apply_lit): Update call to _apply_lit. (apply_arglit): New function. (parse_args): Handle "a" arguments. (parse_auto_input): Handle format names using ":". * math/README.libm-test: Document "a" parameter type. * math/libm-test-support.h (ARG_TYPE_MIN): New macro. (ARG_TYPE_TRUE_MIN): Likewise. (ARG_TYPE_MAX): Likwise. (ARG_MIN_EXP): Likewise. (ARG_MAX_EXP): Likewise. (ARG_MANT_DIG): Likewise. (TEST_COND_arg_ibm128): Likewise. (TEST_COND_ibm128_libgcc): Define conditional on [ARG_FLOAT]. (TEST_COND_arg_fmt): New macro. (init_max_error): Update prototype. * math/libm-test-support.c (test_ibm128): New variable. (init_max_error): Take argument testing_ibm128 and set test_ibm128 instead of using [TEST_COND_ibm128] conditional. (test_exceptions): Use test_ibm128 instead of TEST_COND_ibm128. * math/libm-test-driver.c (STR_ARG_FLOAT): New macro. [TEST_NARROW] (TEST_MSG): New definition. (arg_plus_zero): New macro. (arg_minus_zero): Likewise. (arg_plus_infty): Likewise. (arg_minus_infty): Likewise. (arg_qnan_value_pl): Likewise. (arg_qnan_value): Likewise. (arg_snan_value_pl): Likewise. (arg_snan_value): Likewise. (arg_max_value): Likewise. (arg_min_value): Likewise. (arg_min_subnorm_value): Likewise. [ARG_FLOAT] (struct test_aa_f_data): New struct type. (RUN_TEST_LOOP_aa_f): New macro. (TEST_SUFF): New macro. (TEST_SUFF_STR): Likewise. [!TEST_MATHVEC] (VEC_SUFF): Don't define. (TEST_COND_any_ibm128): New macro. (START): Use TEST_SUFF and TEST_SUFF_STR in initializer for this_func. Update call to init_max_error. * math/test-double.h (FUNC_NARROW_PREFIX): New macro. * math/test-float.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float128.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-math-scalar.h (TEST_NARROW): Likewise. * math/test-math-vector.h (TEST_NARROW): Likewise. * math/test-arg-double.h: New file. * math/test-arg-float128.h: Likewise. * math/test-arg-float32x.h: Likewise. * math/test-arg-float64.h: Likewise. * math/test-arg-float64x.h: Likewise. * math/test-arg-ldouble.h: Likewise. * math/test-math-narrow.h: Likewise. * math/test-narrow-macros.c: Likewise. * sysdeps/ieee754/ldbl-opt/test-narrow-macros-ldbl-64.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (tests): Add test-narrow-macros-ldbl-64. (CFLAGS-test-narrow-macros-ldbl-64.c): New variable.
2018-02-10 05:55:48 +08:00
#elif TEST_NARROW
# define TEST_MSG "testing " STR_FLOAT " (argument " STR_ARG_FLOAT ")\n"
Move libm-test TEST_MSG definitions to libm-test-driver.c. Various files using the libm-test infrastructure define a TEST_MSG macro with an informal description of the tests being run. This patch moves this macro to libm-test-driver.c (the definition depending on other macros already defined), so files specific to (type, choice of whether to test inline functions or finite-math-only functions, vector length) no longer need to define it. This is in preparation for replacing files such as test-float.c with per-function test-float-<func>.c etc. automatically generated in the build directory when tests are run. Tested for x86_64. * math/libm-test-driver.c (STRX): New macro. (STR): Likewise. (STR_FLOAT): Likewise. (STR_VEC_LEN): Likewise. (TEST_MSG): Likewise. Define here instead of expecting to be defined by including file. * math/test-double-finite.c (TEST_MSG): Remove macro. * math/test-double-vlen2.h (TEST_MSG): Likewise. * math/test-double-vlen4.h (TEST_MSG): Likewise. * math/test-double-vlen8.h (TEST_MSG): Likewise. * math/test-double.c (TEST_MSG): Likewise. * math/test-float-finite.c (TEST_MSG): Likewise. * math/test-float-vlen16.h (TEST_MSG): Likewise. * math/test-float-vlen4.h (TEST_MSG): Likewise. * math/test-float-vlen8.h (TEST_MSG): Likewise. * math/test-float.c (TEST_MSG): Likewise. * math/test-idouble.c (TEST_MSG): Likewise. * math/test-ifloat.c (TEST_MSG): Likewise. * math/test-ildouble.c (TEST_MSG): Likewise. * math/test-ldouble-finite.c (TEST_MSG): Likewise. * math/test-ldouble.c (TEST_MSG): Likewise.
2017-02-07 07:07:22 +08:00
#else
# define TEST_MSG "testing " STR_FLOAT " (without inline functions)\n"
#endif
Build most libm-test support code once per type. libm-test-driver.c contains various functions used in the course of libm testing, which are built as part of each test using this machinery. Currently, these functions get built for three tests for each type (e.g. test-float, test-ifloat, test-float-finite), plus the vector function tests. All these tests are huge and thus slow to build; the output of gen-libm-test.pl totals around 40 MB across all functions. To make the individual tests built from the Makefile smaller, it makes sense to split these tests up so the tests for each function are built separately (thus, three tests for each (function, type) pair, plus vector tests built only for functions that actually have vector versions). This improves parallelism and means that if tests fail, the summary of failed tests makes it more obvious where the problem might be without needing to look in the .out files to see which functions' tests failed (though architecture maintainers still need to keep libm-test-ulps up to date to avoid spurious failures of little interest). Simply including libm-test-driver.c as-is in such individual-function tests does not work because of unused static check_* functions (those functions only being used for the types of the outputs of the function under test). It also means the common code gets built over 1000 times instead of nine (plus vector tests). To avoid that issue, this patch splits out the bulk of the libm-test-driver.c code into a separate file libm-test-support.c (with a few functions made non-static). That separate file is built only once for each floating-point type (so at present three times, or twice on architectures with long double = double). Definitions needed in both libm-test-support.c and libm-test-driver.c go in libm-test-support.h (it's possible some of those are in fact only needed in one of the two files). libm-test-driver.c keeps definitions of a limited number of variables used to configure how libm-test-support.c behaves, various macros and structures needed by individual-function tests, and the main function. This move is also consistent in spirit with the move away from test-skeleton.c having all the test support code, to a small support/test-driver.c included in individual tests with most of the code built separately. Tested for x86_64 and x86. * math/libm-test-support.c: New file. Content from math/libm-test-driver.c. * math/libm-test-support.h: Likewise. * math/libm-test-support-double.c: New file. * math/libm-test-support-float.c: Likewise. * math/libm-test-support-ldouble.c: Likewise. * math/libm-test-driver.c: Remove main comment and header includes. Include libm-test-support.h. [!_GNU_SOURCE] (_GNU_SOURCE): Do not define. (flag_test_errno): Remove static. (flag_test_exceptions): Likewise. (flag_test_finite): Likewise. (flag_test_inline): Likewise. (flag_test_mathvec): Likewise. (test_msg): Likewise. (NO_EXCEPTION): Remove. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ulp_idx): Likewise. (qtype_str): Remove static. (TEST_COND_binary32): Remove. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Remove static. (argp): Likewise. (parse_opt): Remove. (check_ulp): Likewise. (libm_test_init): Likewise. (libm_test_finish): Likewise. * math/Makefile (libm-test-support): New variable. (test-extras): Add libm-test-support files. (extra-test-objs): Likewise. (CFLAGS-libm-test-support-float.c): New variable. (CFLAGS-libm-test-support-double.c): Likewise. (CFLAGS-libm-test-support-ldouble.c): Likewise. ($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate libm-test-support objects.
2017-02-09 05:11:49 +08:00
const char test_msg[] = TEST_MSG;
Move libm-test TEST_MSG definitions to libm-test-driver.c. Various files using the libm-test infrastructure define a TEST_MSG macro with an informal description of the tests being run. This patch moves this macro to libm-test-driver.c (the definition depending on other macros already defined), so files specific to (type, choice of whether to test inline functions or finite-math-only functions, vector length) no longer need to define it. This is in preparation for replacing files such as test-float.c with per-function test-float-<func>.c etc. automatically generated in the build directory when tests are run. Tested for x86_64. * math/libm-test-driver.c (STRX): New macro. (STR): Likewise. (STR_FLOAT): Likewise. (STR_VEC_LEN): Likewise. (TEST_MSG): Likewise. Define here instead of expecting to be defined by including file. * math/test-double-finite.c (TEST_MSG): Remove macro. * math/test-double-vlen2.h (TEST_MSG): Likewise. * math/test-double-vlen4.h (TEST_MSG): Likewise. * math/test-double-vlen8.h (TEST_MSG): Likewise. * math/test-double.c (TEST_MSG): Likewise. * math/test-float-finite.c (TEST_MSG): Likewise. * math/test-float-vlen16.h (TEST_MSG): Likewise. * math/test-float-vlen4.h (TEST_MSG): Likewise. * math/test-float-vlen8.h (TEST_MSG): Likewise. * math/test-float.c (TEST_MSG): Likewise. * math/test-idouble.c (TEST_MSG): Likewise. * math/test-ifloat.c (TEST_MSG): Likewise. * math/test-ildouble.c (TEST_MSG): Likewise. * math/test-ldouble-finite.c (TEST_MSG): Likewise. * math/test-ldouble.c (TEST_MSG): Likewise.
2017-02-07 07:07:22 +08:00
Move non-function-specific parts of libm-test.inc to separate file. libm-test.inc contains both test infrastructure and tests of individual functions. This patch moves the infrastructure to a separate file libm-test-driver.c. This is in preparation for splitting the tests of individual functions into separate source files, which will be processed individually by gen-libm-test.pl (so e.g. libm-test-acos.inc and auto-libm-test-out-acos will be processed by gen-libm-test.pl to produce libm-test-acos.c, and files such as test-double-acos.c will be generated by the Makefile to include appropriate headers, libm-test-driver.c and libm-test-acos.c so tests of each function get run separately). It is no doubt possible to split things up further, so that functions not depending on the type being tested only get compiled once and most of those depending on the type being tested get compiled once per type (rather than separately for variants such as inline / no-inline, and separately for each function being tested after that split), but this rearrangement as-is seems a useful incremental step towards splitting these tests by function. * math/libm-test-driver.c: New file. Based on math/libm-test.inc. * math/libm-test.inc: Move all contents, other than tests of individual functions, to libm-test-driver.c. [!FE_TONEAREST] (FE_TONEAREST): Move to libm-test-driver.c. [!FE_TOWARDZERO] (FE_TOWARDZERO): Likewise. [!FE_UPWARD] (FE_UPWARD): Likewise. [!FE_DOWNWARD] (FE_DOWNWARD): Likewise. (NO_EXCEPTION): Likewise. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ULP_IDX): Likewise. (QTYPE_STR): Likewise. (TEST_COND_binary32): Likewise. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (lit_pi_3_m_4_d): Likewise. (lit_pi_3_m_4_ln10_m_d): Likewise. (lit_pi_2_ln10_m_d): Likewise. (lit_pi_4_ln10_m_d): Likewise. (lit_pi_ln10_d): Likewise. (lit_pi_2_d): Likewise. (lit_pi_4_d): Likewise. (lit_pi): Likewise. (lit_e): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (plus_zero): Likewise. (minus_zero): Likewise. (plus_infty): Likewise. (minus_infty): Likewise. (qnan_value_pl): Likewise. (qnan_value): Likewise. (snan_value_pl): Likewise. (snan_value): Likewise. (max_value): Likewise. (min_value): Likewise. (min_subnorm_value): Likewise. (snan_value_ld): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (struct test_f_f_data): Likewise. (struct test_ff_f_data): Likewise. (struct test_fj_f_data): Likewise. (struct test_fi_f_data): Likewise. (struct test_fl_f_data): Likewise. (struct test_if_f_data): Likewise. (struct test_fff_f_data): Likewise. (struct test_fiu_M_data): Likewise. (struct test_fiu_U_data): Likewise. (struct test_c_f_data): Likewise. (struct test_f_f1_data): Likewise. (struct test_fF_f1_data): Likewise. (struct test_ffI_f1_data): Likewise. (struct test_c_c_data): Likewise. (struct test_cc_c_data): Likewise. (struct test_f_i_data): Likewise. (struct test_ff_i_data): Likewise. (struct test_f_l_data): Likewise. (struct test_f_L_data): Likewise. (struct test_fFF_11_data): Likewise. (struct test_Ff_b1_data): Likewise. (IF_ROUND_INIT_): Likewise. (IF_ROUND_INIT_FE_DOWNWARD): Likewise. (IF_ROUND_INIT_FE_TONEAREST): Likewise. (IF_ROUND_INIT_FE_TOWARDZERO): Likewise. (IF_ROUND_INIT_FE_UPWARD): Likewise. (ROUND_RESTORE_): Likewise. (ROUND_RESTORE_FE_DOWNWARD): Likewise. (ROUND_RESTORE_FE_TONEAREST): Likewise. (ROUND_RESTORE_FE_TOWARDZERO): Likewise. (ROUND_RESTORE_FE_UPWARD): Likewise. (RM_): Likewise. (RM_FE_DOWNWARD): Likewise. (RM_FE_TONEAREST): Likewise. (RM_FE_TOWARDZERO): Likewise. (RM_FE_UPWARD): Likewise. (COMMON_TEST_SETUP): Likewise. (EXTRA_OUTPUT_TEST_SETUP): Likewise. (COMMON_TEST_CLEANUP): Likewise. (EXTRA_OUTPUT_TEST_CLEANUP): Likewise. (RUN_TEST_f_f): Likewise. (RUN_TEST_LOOP_f_f): Likewise. (RUN_TEST_fp_f): Likewise. (RUN_TEST_LOOP_fp_f): Likewise. (RUN_TEST_2_f): Likewise. (RUN_TEST_LOOP_2_f): Likewise. (RUN_TEST_ff_f): Likewise. (RUN_TEST_LOOP_ff_f): Likewise. (RUN_TEST_LOOP_fj_f): Likewise. (RUN_TEST_fi_f): Likewise. (RUN_TEST_LOOP_fi_f): Likewise. (RUN_TEST_fl_f): Likewise. (RUN_TEST_LOOP_fl_f): Likewise. (RUN_TEST_if_f): Likewise. (RUN_TEST_LOOP_if_f): Likewise. (RUN_TEST_fff_f): Likewise. (RUN_TEST_LOOP_fff_f): Likewise. (RUN_TEST_fiu_M): Likewise. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (RUN_TEST_c_f): Likewise. (RUN_TEST_LOOP_c_f): Likewise. (RUN_TEST_f_f1): Likewise. (RUN_TEST_LOOP_f_f1): Likewise. (RUN_TEST_fF_f1): Likewise. (RUN_TEST_LOOP_fF_f1): Likewise. (RUN_TEST_fI_f1): Likewise. (RUN_TEST_LOOP_fI_f1): Likewise. (RUN_TEST_ffI_f1_mod8): Likewise. (RUN_TEST_LOOP_ffI_f1_mod8): Likewise. (RUN_TEST_Ff_b1): Likewise. (RUN_TEST_LOOP_Ff_b1): Likewise. (RUN_TEST_Ffp_b1): Likewise. (RUN_TEST_LOOP_Ffp_b1): Likewise. (RUN_TEST_c_c): Likewise. (RUN_TEST_LOOP_c_c): Likewise. (RUN_TEST_cc_c): Likewise. (RUN_TEST_LOOP_cc_c): Likewise. (RUN_TEST_f_i): Likewise. (RUN_TEST_LOOP_f_i): Likewise. (RUN_TEST_f_i_tg): Likewise. (RUN_TEST_LOOP_f_i_tg): Likewise. (RUN_TEST_ff_b): Likewise. (RUN_TEST_LOOP_ff_b): Likewise. (RUN_TEST_ff_i_tg): Likewise. (RUN_TEST_LOOP_ff_i_tg): Likewise. (RUN_TEST_f_b): Likewise. (RUN_TEST_LOOP_f_b): Likewise. (RUN_TEST_f_b_tg): Likewise. (RUN_TEST_LOOP_f_b_tg): Likewise. (RUN_TEST_f_l): Likewise. (RUN_TEST_LOOP_f_l): Likewise. (RUN_TEST_f_L): Likewise. (RUN_TEST_LOOP_f_L): Likewise. (RUN_TEST_fFF_11): Likewise. (RUN_TEST_LOOP_fFF_11): Likewise. (VEC_SUFF): Likewise. (STR_CONCAT): Likewise. (STR_CON3): Likewise. (HAVE_VECTOR): Likewise. (START): Likewise. (END): Likewise. (END_COMPLEX): Likewise. (ALL_RM_TEST): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Likewise. (parse_opt): Likewise. (argp): Likewise. (check_ulp): Likewise. (main): Likewise. (do_test): New function. Call tests of individual functions previously called from main.
2017-02-07 02:12:16 +08:00
/* Allow platforms without all rounding modes to test properly,
assuming they provide an __FE_UNDEFINED in <bits/fenv.h> which
causes fesetround() to return failure. */
#ifndef FE_TONEAREST
# define FE_TONEAREST __FE_UNDEFINED
#endif
#ifndef FE_TOWARDZERO
# define FE_TOWARDZERO __FE_UNDEFINED
#endif
#ifndef FE_UPWARD
# define FE_UPWARD __FE_UNDEFINED
#endif
#ifndef FE_DOWNWARD
# define FE_DOWNWARD __FE_UNDEFINED
#endif
#define TEST_NAN_PAYLOAD_CANONICALIZE (SNAN_TESTS_PRESERVE_PAYLOAD \
? TEST_NAN_PAYLOAD \
: 0)
Build most libm-test support code once per type. libm-test-driver.c contains various functions used in the course of libm testing, which are built as part of each test using this machinery. Currently, these functions get built for three tests for each type (e.g. test-float, test-ifloat, test-float-finite), plus the vector function tests. All these tests are huge and thus slow to build; the output of gen-libm-test.pl totals around 40 MB across all functions. To make the individual tests built from the Makefile smaller, it makes sense to split these tests up so the tests for each function are built separately (thus, three tests for each (function, type) pair, plus vector tests built only for functions that actually have vector versions). This improves parallelism and means that if tests fail, the summary of failed tests makes it more obvious where the problem might be without needing to look in the .out files to see which functions' tests failed (though architecture maintainers still need to keep libm-test-ulps up to date to avoid spurious failures of little interest). Simply including libm-test-driver.c as-is in such individual-function tests does not work because of unused static check_* functions (those functions only being used for the types of the outputs of the function under test). It also means the common code gets built over 1000 times instead of nine (plus vector tests). To avoid that issue, this patch splits out the bulk of the libm-test-driver.c code into a separate file libm-test-support.c (with a few functions made non-static). That separate file is built only once for each floating-point type (so at present three times, or twice on architectures with long double = double). Definitions needed in both libm-test-support.c and libm-test-driver.c go in libm-test-support.h (it's possible some of those are in fact only needed in one of the two files). libm-test-driver.c keeps definitions of a limited number of variables used to configure how libm-test-support.c behaves, various macros and structures needed by individual-function tests, and the main function. This move is also consistent in spirit with the move away from test-skeleton.c having all the test support code, to a small support/test-driver.c included in individual tests with most of the code built separately. Tested for x86_64 and x86. * math/libm-test-support.c: New file. Content from math/libm-test-driver.c. * math/libm-test-support.h: Likewise. * math/libm-test-support-double.c: New file. * math/libm-test-support-float.c: Likewise. * math/libm-test-support-ldouble.c: Likewise. * math/libm-test-driver.c: Remove main comment and header includes. Include libm-test-support.h. [!_GNU_SOURCE] (_GNU_SOURCE): Do not define. (flag_test_errno): Remove static. (flag_test_exceptions): Likewise. (flag_test_finite): Likewise. (flag_test_inline): Likewise. (flag_test_mathvec): Likewise. (test_msg): Likewise. (NO_EXCEPTION): Remove. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ulp_idx): Likewise. (qtype_str): Remove static. (TEST_COND_binary32): Remove. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Remove static. (argp): Likewise. (parse_opt): Remove. (check_ulp): Likewise. (libm_test_init): Likewise. (libm_test_finish): Likewise. * math/Makefile (libm-test-support): New variable. (test-extras): Add libm-test-support files. (extra-test-objs): Likewise. (CFLAGS-libm-test-support-float.c): New variable. (CFLAGS-libm-test-support-double.c): Likewise. (CFLAGS-libm-test-support-ldouble.c): Likewise. ($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate libm-test-support objects.
2017-02-09 05:11:49 +08:00
const char qtype_str[] = TYPE_STR;
Move non-function-specific parts of libm-test.inc to separate file. libm-test.inc contains both test infrastructure and tests of individual functions. This patch moves the infrastructure to a separate file libm-test-driver.c. This is in preparation for splitting the tests of individual functions into separate source files, which will be processed individually by gen-libm-test.pl (so e.g. libm-test-acos.inc and auto-libm-test-out-acos will be processed by gen-libm-test.pl to produce libm-test-acos.c, and files such as test-double-acos.c will be generated by the Makefile to include appropriate headers, libm-test-driver.c and libm-test-acos.c so tests of each function get run separately). It is no doubt possible to split things up further, so that functions not depending on the type being tested only get compiled once and most of those depending on the type being tested get compiled once per type (rather than separately for variants such as inline / no-inline, and separately for each function being tested after that split), but this rearrangement as-is seems a useful incremental step towards splitting these tests by function. * math/libm-test-driver.c: New file. Based on math/libm-test.inc. * math/libm-test.inc: Move all contents, other than tests of individual functions, to libm-test-driver.c. [!FE_TONEAREST] (FE_TONEAREST): Move to libm-test-driver.c. [!FE_TOWARDZERO] (FE_TOWARDZERO): Likewise. [!FE_UPWARD] (FE_UPWARD): Likewise. [!FE_DOWNWARD] (FE_DOWNWARD): Likewise. (NO_EXCEPTION): Likewise. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ULP_IDX): Likewise. (QTYPE_STR): Likewise. (TEST_COND_binary32): Likewise. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (lit_pi_3_m_4_d): Likewise. (lit_pi_3_m_4_ln10_m_d): Likewise. (lit_pi_2_ln10_m_d): Likewise. (lit_pi_4_ln10_m_d): Likewise. (lit_pi_ln10_d): Likewise. (lit_pi_2_d): Likewise. (lit_pi_4_d): Likewise. (lit_pi): Likewise. (lit_e): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (plus_zero): Likewise. (minus_zero): Likewise. (plus_infty): Likewise. (minus_infty): Likewise. (qnan_value_pl): Likewise. (qnan_value): Likewise. (snan_value_pl): Likewise. (snan_value): Likewise. (max_value): Likewise. (min_value): Likewise. (min_subnorm_value): Likewise. (snan_value_ld): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (struct test_f_f_data): Likewise. (struct test_ff_f_data): Likewise. (struct test_fj_f_data): Likewise. (struct test_fi_f_data): Likewise. (struct test_fl_f_data): Likewise. (struct test_if_f_data): Likewise. (struct test_fff_f_data): Likewise. (struct test_fiu_M_data): Likewise. (struct test_fiu_U_data): Likewise. (struct test_c_f_data): Likewise. (struct test_f_f1_data): Likewise. (struct test_fF_f1_data): Likewise. (struct test_ffI_f1_data): Likewise. (struct test_c_c_data): Likewise. (struct test_cc_c_data): Likewise. (struct test_f_i_data): Likewise. (struct test_ff_i_data): Likewise. (struct test_f_l_data): Likewise. (struct test_f_L_data): Likewise. (struct test_fFF_11_data): Likewise. (struct test_Ff_b1_data): Likewise. (IF_ROUND_INIT_): Likewise. (IF_ROUND_INIT_FE_DOWNWARD): Likewise. (IF_ROUND_INIT_FE_TONEAREST): Likewise. (IF_ROUND_INIT_FE_TOWARDZERO): Likewise. (IF_ROUND_INIT_FE_UPWARD): Likewise. (ROUND_RESTORE_): Likewise. (ROUND_RESTORE_FE_DOWNWARD): Likewise. (ROUND_RESTORE_FE_TONEAREST): Likewise. (ROUND_RESTORE_FE_TOWARDZERO): Likewise. (ROUND_RESTORE_FE_UPWARD): Likewise. (RM_): Likewise. (RM_FE_DOWNWARD): Likewise. (RM_FE_TONEAREST): Likewise. (RM_FE_TOWARDZERO): Likewise. (RM_FE_UPWARD): Likewise. (COMMON_TEST_SETUP): Likewise. (EXTRA_OUTPUT_TEST_SETUP): Likewise. (COMMON_TEST_CLEANUP): Likewise. (EXTRA_OUTPUT_TEST_CLEANUP): Likewise. (RUN_TEST_f_f): Likewise. (RUN_TEST_LOOP_f_f): Likewise. (RUN_TEST_fp_f): Likewise. (RUN_TEST_LOOP_fp_f): Likewise. (RUN_TEST_2_f): Likewise. (RUN_TEST_LOOP_2_f): Likewise. (RUN_TEST_ff_f): Likewise. (RUN_TEST_LOOP_ff_f): Likewise. (RUN_TEST_LOOP_fj_f): Likewise. (RUN_TEST_fi_f): Likewise. (RUN_TEST_LOOP_fi_f): Likewise. (RUN_TEST_fl_f): Likewise. (RUN_TEST_LOOP_fl_f): Likewise. (RUN_TEST_if_f): Likewise. (RUN_TEST_LOOP_if_f): Likewise. (RUN_TEST_fff_f): Likewise. (RUN_TEST_LOOP_fff_f): Likewise. (RUN_TEST_fiu_M): Likewise. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (RUN_TEST_c_f): Likewise. (RUN_TEST_LOOP_c_f): Likewise. (RUN_TEST_f_f1): Likewise. (RUN_TEST_LOOP_f_f1): Likewise. (RUN_TEST_fF_f1): Likewise. (RUN_TEST_LOOP_fF_f1): Likewise. (RUN_TEST_fI_f1): Likewise. (RUN_TEST_LOOP_fI_f1): Likewise. (RUN_TEST_ffI_f1_mod8): Likewise. (RUN_TEST_LOOP_ffI_f1_mod8): Likewise. (RUN_TEST_Ff_b1): Likewise. (RUN_TEST_LOOP_Ff_b1): Likewise. (RUN_TEST_Ffp_b1): Likewise. (RUN_TEST_LOOP_Ffp_b1): Likewise. (RUN_TEST_c_c): Likewise. (RUN_TEST_LOOP_c_c): Likewise. (RUN_TEST_cc_c): Likewise. (RUN_TEST_LOOP_cc_c): Likewise. (RUN_TEST_f_i): Likewise. (RUN_TEST_LOOP_f_i): Likewise. (RUN_TEST_f_i_tg): Likewise. (RUN_TEST_LOOP_f_i_tg): Likewise. (RUN_TEST_ff_b): Likewise. (RUN_TEST_LOOP_ff_b): Likewise. (RUN_TEST_ff_i_tg): Likewise. (RUN_TEST_LOOP_ff_i_tg): Likewise. (RUN_TEST_f_b): Likewise. (RUN_TEST_LOOP_f_b): Likewise. (RUN_TEST_f_b_tg): Likewise. (RUN_TEST_LOOP_f_b_tg): Likewise. (RUN_TEST_f_l): Likewise. (RUN_TEST_LOOP_f_l): Likewise. (RUN_TEST_f_L): Likewise. (RUN_TEST_LOOP_f_L): Likewise. (RUN_TEST_fFF_11): Likewise. (RUN_TEST_LOOP_fFF_11): Likewise. (VEC_SUFF): Likewise. (STR_CONCAT): Likewise. (STR_CON3): Likewise. (HAVE_VECTOR): Likewise. (START): Likewise. (END): Likewise. (END_COMPLEX): Likewise. (ALL_RM_TEST): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Likewise. (parse_opt): Likewise. (argp): Likewise. (check_ulp): Likewise. (main): Likewise. (do_test): New function. Call tests of individual functions previously called from main.
2017-02-07 02:12:16 +08:00
/* Various constants derived from pi. We must supply them precalculated for
accuracy. They are written as a series of postfix operations to keep
them concise yet somewhat readable. */
/* (pi * 3) / 4 */
#define lit_pi_3_m_4_d LIT (2.356194490192344928846982537459627163)
/* pi * 3 / (4 * ln(10)) */
#define lit_pi_3_m_4_ln10_m_d LIT (1.023282265381381010614337719073516828)
/* pi / (2 * ln(10)) */
#define lit_pi_2_ln10_m_d LIT (0.682188176920920673742891812715677885)
/* pi / (4 * ln(10)) */
#define lit_pi_4_ln10_m_d LIT (0.341094088460460336871445906357838943)
/* pi / ln(10) */
#define lit_pi_ln10_d LIT (1.364376353841841347485783625431355770)
/* pi / 2 */
#define lit_pi_2_d LITM (M_PI_2)
/* pi / 4 */
#define lit_pi_4_d LITM (M_PI_4)
/* pi */
#define lit_pi LITM (M_PI)
/* Other useful constants. */
/* e */
#define lit_e LITM (M_E)
#define plus_zero LIT (0.0)
#define minus_zero LIT (-0.0)
#define plus_infty FUNC (__builtin_inf) ()
#define minus_infty -(FUNC (__builtin_inf) ())
#define qnan_value_pl(S) FUNC (__builtin_nan) (S)
#define qnan_value qnan_value_pl ("")
#define snan_value_pl(S) FUNC (__builtin_nans) (S)
#define snan_value snan_value_pl ("")
#define max_value TYPE_MAX
#define min_value TYPE_MIN
#define min_subnorm_value TYPE_TRUE_MIN
Add test infrastructure for narrowing libm functions. This patch continues preparations for adding TS 18661-1 narrowing libm functions by adding the required testsuite infrastructure to test such functions through the libm-test infrastructure. That infrastructure is based around testing for a single type, FLOAT. For the narrowing functions, FLOAT, the "main" type for testing, is the function return type; the argument type is ARG_FLOAT. This is consistent with how the code built once for each type, libm-test-support.c, depends on FLOAT for such things as calculating ulps errors in results but can already handle different argument types (pointers, integers, long double for nexttoward). Makefile machinery is added to handle building tests for all pairs of types for which there are narrowing functions (as with non-narrowing functions, aliases are tested just the same as the functions they alias). gen-auto-libm-tests gains a --narrow option for building outputs for narrowing functions (so narrowing sqrt and fma will share the same inputs as non-narrowing, but gen-auto-libm-tests will be run with and without that option to generate different output files). In the narrowing case, the auto-libm-test-out-narrow-* files include annotations for each test about what properties ARG_FLOAT must have to be able to represent all the inputs for that test; those annotations result in calls to the TEST_COND_arg_fmt macro. gen-libm-test.pl has some minor updates to handle narrowing tests (for example, arguments in such tests must be surrounded by ARG_LIT calls instead of LIT calls). Various new macros are added to the C test support code (for example, sNaN initializers need to be properly typed, so arg_snan_value is added; other such arg_* macros are added as it seems cleanest to do so, though some are not strictly required). Special-casing of the ibm128 format to allow for its limitations is adjusted to handle it as the argument format as well as as the result format; thus, the tests of the new functions allow nonzero ulps only in the case where ibm128 is the argument format, as otherwise the functions correspond to fully-defined IEEE operations. The ulps in question appear as e.g. 'Function: "add_ldouble"' in libm-test-ulps (with 1ulp errors then listed for double and float for that function in powerpc); no support is added to generate corresponding faddl / daddl ulps listings in the ulps table in the manual. For the previous patch, I noted the need to avoid spurious macro expansions of identifiers such as "add". A test test-narrow-macros.c is added to verify such macro expansions are successfully avoided, and there is also a -mlong-double-64 version of that test for ldbl-opt. This test is set up to cover the full set of relevant identifiers from the start rather than adding functions one at a time as each function group is added. Tested for x86_64 (this patch in isolation, as well as testing for various configurations in conjunction with the actual addition of "add" functions). * math/Makefile (test-type-pairs): New variable. (test-type-pairs-f64xf128-yes): Likewise. (tests): Add test-narrow-macros. (libm-test-funcs-narrow): New variable. (libm-test-c-narrow): Likewise. (generated): Add $(libm-test-c-narrow). (libm-tests-base-narrow): New variable. (libm-tests-narrow): Likewise. (libm-tests): Add $(libm-tests-narrow). (libm-tests-for-type): Handle $(libm-tests-narrow). (libm-test-c-narrow-obj): New variable. ($(libm-test-c-narrow-obj)): New rule. ($(foreach t,$(libm-tests-narrow),$(objpfx)$(t).c)): Likewise. ($(foreach f,$(libm-test-funcs-narrow),$(objpfx)$(o)-$(f).o)): Use $(o-iterator) to set dependencies and CFLAGS. * math/gen-auto-libm-tests.c: Document use for narrowing functions. (output_for_one_input_case): Take argument NARROW. (generate_output): Likewise. Update call to output_for_one_input_case. (main): Take --narrow option. Update call to generate_output. * math/gen-libm-test.pl (_apply_lit): Take macro name as argument. (apply_lit): Update call to _apply_lit. (apply_arglit): New function. (parse_args): Handle "a" arguments. (parse_auto_input): Handle format names using ":". * math/README.libm-test: Document "a" parameter type. * math/libm-test-support.h (ARG_TYPE_MIN): New macro. (ARG_TYPE_TRUE_MIN): Likewise. (ARG_TYPE_MAX): Likwise. (ARG_MIN_EXP): Likewise. (ARG_MAX_EXP): Likewise. (ARG_MANT_DIG): Likewise. (TEST_COND_arg_ibm128): Likewise. (TEST_COND_ibm128_libgcc): Define conditional on [ARG_FLOAT]. (TEST_COND_arg_fmt): New macro. (init_max_error): Update prototype. * math/libm-test-support.c (test_ibm128): New variable. (init_max_error): Take argument testing_ibm128 and set test_ibm128 instead of using [TEST_COND_ibm128] conditional. (test_exceptions): Use test_ibm128 instead of TEST_COND_ibm128. * math/libm-test-driver.c (STR_ARG_FLOAT): New macro. [TEST_NARROW] (TEST_MSG): New definition. (arg_plus_zero): New macro. (arg_minus_zero): Likewise. (arg_plus_infty): Likewise. (arg_minus_infty): Likewise. (arg_qnan_value_pl): Likewise. (arg_qnan_value): Likewise. (arg_snan_value_pl): Likewise. (arg_snan_value): Likewise. (arg_max_value): Likewise. (arg_min_value): Likewise. (arg_min_subnorm_value): Likewise. [ARG_FLOAT] (struct test_aa_f_data): New struct type. (RUN_TEST_LOOP_aa_f): New macro. (TEST_SUFF): New macro. (TEST_SUFF_STR): Likewise. [!TEST_MATHVEC] (VEC_SUFF): Don't define. (TEST_COND_any_ibm128): New macro. (START): Use TEST_SUFF and TEST_SUFF_STR in initializer for this_func. Update call to init_max_error. * math/test-double.h (FUNC_NARROW_PREFIX): New macro. * math/test-float.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float128.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-math-scalar.h (TEST_NARROW): Likewise. * math/test-math-vector.h (TEST_NARROW): Likewise. * math/test-arg-double.h: New file. * math/test-arg-float128.h: Likewise. * math/test-arg-float32x.h: Likewise. * math/test-arg-float64.h: Likewise. * math/test-arg-float64x.h: Likewise. * math/test-arg-ldouble.h: Likewise. * math/test-math-narrow.h: Likewise. * math/test-narrow-macros.c: Likewise. * sysdeps/ieee754/ldbl-opt/test-narrow-macros-ldbl-64.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (tests): Add test-narrow-macros-ldbl-64. (CFLAGS-test-narrow-macros-ldbl-64.c): New variable.
2018-02-10 05:55:48 +08:00
#define arg_plus_zero ARG_LIT (0.0)
#define arg_minus_zero ARG_LIT (-0.0)
#define arg_plus_infty ARG_FUNC (__builtin_inf) ()
#define arg_minus_infty -(ARG_FUNC (__builtin_inf) ())
#define arg_qnan_value_pl(S) ARG_FUNC (__builtin_nan) (S)
#define arg_qnan_value arg_qnan_value_pl ("")
#define arg_snan_value_pl(S) ARG_FUNC (__builtin_nans) (S)
#define arg_snan_value arg_snan_value_pl ("")
#define arg_max_value ARG_TYPE_MAX
#define arg_min_value ARG_TYPE_MIN
#define arg_min_subnorm_value ARG_TYPE_TRUE_MIN
Move non-function-specific parts of libm-test.inc to separate file. libm-test.inc contains both test infrastructure and tests of individual functions. This patch moves the infrastructure to a separate file libm-test-driver.c. This is in preparation for splitting the tests of individual functions into separate source files, which will be processed individually by gen-libm-test.pl (so e.g. libm-test-acos.inc and auto-libm-test-out-acos will be processed by gen-libm-test.pl to produce libm-test-acos.c, and files such as test-double-acos.c will be generated by the Makefile to include appropriate headers, libm-test-driver.c and libm-test-acos.c so tests of each function get run separately). It is no doubt possible to split things up further, so that functions not depending on the type being tested only get compiled once and most of those depending on the type being tested get compiled once per type (rather than separately for variants such as inline / no-inline, and separately for each function being tested after that split), but this rearrangement as-is seems a useful incremental step towards splitting these tests by function. * math/libm-test-driver.c: New file. Based on math/libm-test.inc. * math/libm-test.inc: Move all contents, other than tests of individual functions, to libm-test-driver.c. [!FE_TONEAREST] (FE_TONEAREST): Move to libm-test-driver.c. [!FE_TOWARDZERO] (FE_TOWARDZERO): Likewise. [!FE_UPWARD] (FE_UPWARD): Likewise. [!FE_DOWNWARD] (FE_DOWNWARD): Likewise. (NO_EXCEPTION): Likewise. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ULP_IDX): Likewise. (QTYPE_STR): Likewise. (TEST_COND_binary32): Likewise. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (lit_pi_3_m_4_d): Likewise. (lit_pi_3_m_4_ln10_m_d): Likewise. (lit_pi_2_ln10_m_d): Likewise. (lit_pi_4_ln10_m_d): Likewise. (lit_pi_ln10_d): Likewise. (lit_pi_2_d): Likewise. (lit_pi_4_d): Likewise. (lit_pi): Likewise. (lit_e): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (plus_zero): Likewise. (minus_zero): Likewise. (plus_infty): Likewise. (minus_infty): Likewise. (qnan_value_pl): Likewise. (qnan_value): Likewise. (snan_value_pl): Likewise. (snan_value): Likewise. (max_value): Likewise. (min_value): Likewise. (min_subnorm_value): Likewise. (snan_value_ld): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (struct test_f_f_data): Likewise. (struct test_ff_f_data): Likewise. (struct test_fj_f_data): Likewise. (struct test_fi_f_data): Likewise. (struct test_fl_f_data): Likewise. (struct test_if_f_data): Likewise. (struct test_fff_f_data): Likewise. (struct test_fiu_M_data): Likewise. (struct test_fiu_U_data): Likewise. (struct test_c_f_data): Likewise. (struct test_f_f1_data): Likewise. (struct test_fF_f1_data): Likewise. (struct test_ffI_f1_data): Likewise. (struct test_c_c_data): Likewise. (struct test_cc_c_data): Likewise. (struct test_f_i_data): Likewise. (struct test_ff_i_data): Likewise. (struct test_f_l_data): Likewise. (struct test_f_L_data): Likewise. (struct test_fFF_11_data): Likewise. (struct test_Ff_b1_data): Likewise. (IF_ROUND_INIT_): Likewise. (IF_ROUND_INIT_FE_DOWNWARD): Likewise. (IF_ROUND_INIT_FE_TONEAREST): Likewise. (IF_ROUND_INIT_FE_TOWARDZERO): Likewise. (IF_ROUND_INIT_FE_UPWARD): Likewise. (ROUND_RESTORE_): Likewise. (ROUND_RESTORE_FE_DOWNWARD): Likewise. (ROUND_RESTORE_FE_TONEAREST): Likewise. (ROUND_RESTORE_FE_TOWARDZERO): Likewise. (ROUND_RESTORE_FE_UPWARD): Likewise. (RM_): Likewise. (RM_FE_DOWNWARD): Likewise. (RM_FE_TONEAREST): Likewise. (RM_FE_TOWARDZERO): Likewise. (RM_FE_UPWARD): Likewise. (COMMON_TEST_SETUP): Likewise. (EXTRA_OUTPUT_TEST_SETUP): Likewise. (COMMON_TEST_CLEANUP): Likewise. (EXTRA_OUTPUT_TEST_CLEANUP): Likewise. (RUN_TEST_f_f): Likewise. (RUN_TEST_LOOP_f_f): Likewise. (RUN_TEST_fp_f): Likewise. (RUN_TEST_LOOP_fp_f): Likewise. (RUN_TEST_2_f): Likewise. (RUN_TEST_LOOP_2_f): Likewise. (RUN_TEST_ff_f): Likewise. (RUN_TEST_LOOP_ff_f): Likewise. (RUN_TEST_LOOP_fj_f): Likewise. (RUN_TEST_fi_f): Likewise. (RUN_TEST_LOOP_fi_f): Likewise. (RUN_TEST_fl_f): Likewise. (RUN_TEST_LOOP_fl_f): Likewise. (RUN_TEST_if_f): Likewise. (RUN_TEST_LOOP_if_f): Likewise. (RUN_TEST_fff_f): Likewise. (RUN_TEST_LOOP_fff_f): Likewise. (RUN_TEST_fiu_M): Likewise. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (RUN_TEST_c_f): Likewise. (RUN_TEST_LOOP_c_f): Likewise. (RUN_TEST_f_f1): Likewise. (RUN_TEST_LOOP_f_f1): Likewise. (RUN_TEST_fF_f1): Likewise. (RUN_TEST_LOOP_fF_f1): Likewise. (RUN_TEST_fI_f1): Likewise. (RUN_TEST_LOOP_fI_f1): Likewise. (RUN_TEST_ffI_f1_mod8): Likewise. (RUN_TEST_LOOP_ffI_f1_mod8): Likewise. (RUN_TEST_Ff_b1): Likewise. (RUN_TEST_LOOP_Ff_b1): Likewise. (RUN_TEST_Ffp_b1): Likewise. (RUN_TEST_LOOP_Ffp_b1): Likewise. (RUN_TEST_c_c): Likewise. (RUN_TEST_LOOP_c_c): Likewise. (RUN_TEST_cc_c): Likewise. (RUN_TEST_LOOP_cc_c): Likewise. (RUN_TEST_f_i): Likewise. (RUN_TEST_LOOP_f_i): Likewise. (RUN_TEST_f_i_tg): Likewise. (RUN_TEST_LOOP_f_i_tg): Likewise. (RUN_TEST_ff_b): Likewise. (RUN_TEST_LOOP_ff_b): Likewise. (RUN_TEST_ff_i_tg): Likewise. (RUN_TEST_LOOP_ff_i_tg): Likewise. (RUN_TEST_f_b): Likewise. (RUN_TEST_LOOP_f_b): Likewise. (RUN_TEST_f_b_tg): Likewise. (RUN_TEST_LOOP_f_b_tg): Likewise. (RUN_TEST_f_l): Likewise. (RUN_TEST_LOOP_f_l): Likewise. (RUN_TEST_f_L): Likewise. (RUN_TEST_LOOP_f_L): Likewise. (RUN_TEST_fFF_11): Likewise. (RUN_TEST_LOOP_fFF_11): Likewise. (VEC_SUFF): Likewise. (STR_CONCAT): Likewise. (STR_CON3): Likewise. (HAVE_VECTOR): Likewise. (START): Likewise. (END): Likewise. (END_COMPLEX): Likewise. (ALL_RM_TEST): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Likewise. (parse_opt): Likewise. (argp): Likewise. (check_ulp): Likewise. (main): Likewise. (do_test): New function. Call tests of individual functions previously called from main.
2017-02-07 02:12:16 +08:00
/* For nexttoward tests. */
#define snan_value_ld __builtin_nansl ("")
/* For pseudo-normal number tests. */
#if TEST_COND_intel96
# include <math_ldbl.h>
#define pseudo_inf { .parts = { 0x00000000, 0x00000000, 0x7fff }}
#define pseudo_zero { .parts = { 0x00000000, 0x00000000, 0x0100 }}
#define pseudo_qnan { .parts = { 0x00000001, 0x00000000, 0x7fff }}
#define pseudo_snan { .parts = { 0x00000001, 0x40000000, 0x7fff }}
#define pseudo_unnormal { .parts = { 0x00000001, 0x40000000, 0x0100 }}
#endif
Move non-function-specific parts of libm-test.inc to separate file. libm-test.inc contains both test infrastructure and tests of individual functions. This patch moves the infrastructure to a separate file libm-test-driver.c. This is in preparation for splitting the tests of individual functions into separate source files, which will be processed individually by gen-libm-test.pl (so e.g. libm-test-acos.inc and auto-libm-test-out-acos will be processed by gen-libm-test.pl to produce libm-test-acos.c, and files such as test-double-acos.c will be generated by the Makefile to include appropriate headers, libm-test-driver.c and libm-test-acos.c so tests of each function get run separately). It is no doubt possible to split things up further, so that functions not depending on the type being tested only get compiled once and most of those depending on the type being tested get compiled once per type (rather than separately for variants such as inline / no-inline, and separately for each function being tested after that split), but this rearrangement as-is seems a useful incremental step towards splitting these tests by function. * math/libm-test-driver.c: New file. Based on math/libm-test.inc. * math/libm-test.inc: Move all contents, other than tests of individual functions, to libm-test-driver.c. [!FE_TONEAREST] (FE_TONEAREST): Move to libm-test-driver.c. [!FE_TOWARDZERO] (FE_TOWARDZERO): Likewise. [!FE_UPWARD] (FE_UPWARD): Likewise. [!FE_DOWNWARD] (FE_DOWNWARD): Likewise. (NO_EXCEPTION): Likewise. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ULP_IDX): Likewise. (QTYPE_STR): Likewise. (TEST_COND_binary32): Likewise. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (lit_pi_3_m_4_d): Likewise. (lit_pi_3_m_4_ln10_m_d): Likewise. (lit_pi_2_ln10_m_d): Likewise. (lit_pi_4_ln10_m_d): Likewise. (lit_pi_ln10_d): Likewise. (lit_pi_2_d): Likewise. (lit_pi_4_d): Likewise. (lit_pi): Likewise. (lit_e): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (plus_zero): Likewise. (minus_zero): Likewise. (plus_infty): Likewise. (minus_infty): Likewise. (qnan_value_pl): Likewise. (qnan_value): Likewise. (snan_value_pl): Likewise. (snan_value): Likewise. (max_value): Likewise. (min_value): Likewise. (min_subnorm_value): Likewise. (snan_value_ld): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (struct test_f_f_data): Likewise. (struct test_ff_f_data): Likewise. (struct test_fj_f_data): Likewise. (struct test_fi_f_data): Likewise. (struct test_fl_f_data): Likewise. (struct test_if_f_data): Likewise. (struct test_fff_f_data): Likewise. (struct test_fiu_M_data): Likewise. (struct test_fiu_U_data): Likewise. (struct test_c_f_data): Likewise. (struct test_f_f1_data): Likewise. (struct test_fF_f1_data): Likewise. (struct test_ffI_f1_data): Likewise. (struct test_c_c_data): Likewise. (struct test_cc_c_data): Likewise. (struct test_f_i_data): Likewise. (struct test_ff_i_data): Likewise. (struct test_f_l_data): Likewise. (struct test_f_L_data): Likewise. (struct test_fFF_11_data): Likewise. (struct test_Ff_b1_data): Likewise. (IF_ROUND_INIT_): Likewise. (IF_ROUND_INIT_FE_DOWNWARD): Likewise. (IF_ROUND_INIT_FE_TONEAREST): Likewise. (IF_ROUND_INIT_FE_TOWARDZERO): Likewise. (IF_ROUND_INIT_FE_UPWARD): Likewise. (ROUND_RESTORE_): Likewise. (ROUND_RESTORE_FE_DOWNWARD): Likewise. (ROUND_RESTORE_FE_TONEAREST): Likewise. (ROUND_RESTORE_FE_TOWARDZERO): Likewise. (ROUND_RESTORE_FE_UPWARD): Likewise. (RM_): Likewise. (RM_FE_DOWNWARD): Likewise. (RM_FE_TONEAREST): Likewise. (RM_FE_TOWARDZERO): Likewise. (RM_FE_UPWARD): Likewise. (COMMON_TEST_SETUP): Likewise. (EXTRA_OUTPUT_TEST_SETUP): Likewise. (COMMON_TEST_CLEANUP): Likewise. (EXTRA_OUTPUT_TEST_CLEANUP): Likewise. (RUN_TEST_f_f): Likewise. (RUN_TEST_LOOP_f_f): Likewise. (RUN_TEST_fp_f): Likewise. (RUN_TEST_LOOP_fp_f): Likewise. (RUN_TEST_2_f): Likewise. (RUN_TEST_LOOP_2_f): Likewise. (RUN_TEST_ff_f): Likewise. (RUN_TEST_LOOP_ff_f): Likewise. (RUN_TEST_LOOP_fj_f): Likewise. (RUN_TEST_fi_f): Likewise. (RUN_TEST_LOOP_fi_f): Likewise. (RUN_TEST_fl_f): Likewise. (RUN_TEST_LOOP_fl_f): Likewise. (RUN_TEST_if_f): Likewise. (RUN_TEST_LOOP_if_f): Likewise. (RUN_TEST_fff_f): Likewise. (RUN_TEST_LOOP_fff_f): Likewise. (RUN_TEST_fiu_M): Likewise. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (RUN_TEST_c_f): Likewise. (RUN_TEST_LOOP_c_f): Likewise. (RUN_TEST_f_f1): Likewise. (RUN_TEST_LOOP_f_f1): Likewise. (RUN_TEST_fF_f1): Likewise. (RUN_TEST_LOOP_fF_f1): Likewise. (RUN_TEST_fI_f1): Likewise. (RUN_TEST_LOOP_fI_f1): Likewise. (RUN_TEST_ffI_f1_mod8): Likewise. (RUN_TEST_LOOP_ffI_f1_mod8): Likewise. (RUN_TEST_Ff_b1): Likewise. (RUN_TEST_LOOP_Ff_b1): Likewise. (RUN_TEST_Ffp_b1): Likewise. (RUN_TEST_LOOP_Ffp_b1): Likewise. (RUN_TEST_c_c): Likewise. (RUN_TEST_LOOP_c_c): Likewise. (RUN_TEST_cc_c): Likewise. (RUN_TEST_LOOP_cc_c): Likewise. (RUN_TEST_f_i): Likewise. (RUN_TEST_LOOP_f_i): Likewise. (RUN_TEST_f_i_tg): Likewise. (RUN_TEST_LOOP_f_i_tg): Likewise. (RUN_TEST_ff_b): Likewise. (RUN_TEST_LOOP_ff_b): Likewise. (RUN_TEST_ff_i_tg): Likewise. (RUN_TEST_LOOP_ff_i_tg): Likewise. (RUN_TEST_f_b): Likewise. (RUN_TEST_LOOP_f_b): Likewise. (RUN_TEST_f_b_tg): Likewise. (RUN_TEST_LOOP_f_b_tg): Likewise. (RUN_TEST_f_l): Likewise. (RUN_TEST_LOOP_f_l): Likewise. (RUN_TEST_f_L): Likewise. (RUN_TEST_LOOP_f_L): Likewise. (RUN_TEST_fFF_11): Likewise. (RUN_TEST_LOOP_fFF_11): Likewise. (VEC_SUFF): Likewise. (STR_CONCAT): Likewise. (STR_CON3): Likewise. (HAVE_VECTOR): Likewise. (START): Likewise. (END): Likewise. (END_COMPLEX): Likewise. (ALL_RM_TEST): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Likewise. (parse_opt): Likewise. (argp): Likewise. (check_ulp): Likewise. (main): Likewise. (do_test): New function. Call tests of individual functions previously called from main.
2017-02-07 02:12:16 +08:00
/* Structures for each kind of test. */
/* Used for both RUN_TEST_LOOP_f_f and RUN_TEST_LOOP_fp_f. */
struct test_f_f_data
{
const char *arg_str;
FLOAT arg;
struct
{
FLOAT expected;
int exceptions;
} rd, rn, rz, ru;
};
struct test_ff_f_data
{
const char *arg_str;
FLOAT arg1, arg2;
struct
{
FLOAT expected;
int exceptions;
} rd, rn, rz, ru;
};
Replace gen-libm-test.pl with gen-libm-test.py. Following the recent discussion of using Python instead of Perl and Awk for glibc build / test, this patch replaces gen-libm-test.pl with a new gen-libm-test.py script. This script should work with all Python versions supported by glibc (tested by hand with Python 2.7, tested in the build system with Python 3.5; configure prefers Python 3 if available). This script is designed to give identical output to gen-libm-test.pl for ease of verification of the change, except for generated comments referring to .py instead of .pl. (That is, identical for actual inputs passed to the script, not necessarily for all possible input; for example, this version more precisely follows the C standard syntax for floating-point constants when deciding when to add LIT macro calls.) In one place a comment notes that the generation of NON_FINITE flags is replicating a bug in the Perl script to assist in such comparisons (with the expectation that this bug can then be separately fixed in the Python script later). Tested for x86_64, including comparison of generated files (and hand testing of the case of generating a sorted libm-test-ulps file, which isn't covered by normal "make check"). I'd expect to follow this up by extending the new script to produce the ulps tables for the manual as well (replacing manual/libm-err-tab.pl, so that then we just have one ulps file parser) - at which point the manual build would depend on both Perl and Python (eliminating the Perl dependency would require someone to rewrite summary.pl in Python, and that would only eliminate the *direct* Perl dependency; current makeinfo is written in Perl so there would still be an indirect dependency). I think install.texi is more or less equally out-of-date regarding Perl and Python uses before and after this patch, so I don't think this patch depends on my patch <https://sourceware.org/ml/libc-alpha/2018-08/msg00133.html> to update install.texi regarding such uses (pending review). * math/gen-libm-test.py: New file. * math/gen-libm-test.pl: Remove. * math/Makefile [$(PERL) != no]: Change condition to [PYTHON]. ($(objpfx)libm-test-ulps.h): Use gen-libm-test.py instead of gen-libm-test.pl. ($(libm-test-c-noauto-obj)): Likewise. ($(libm-test-c-auto-obj)): Likewise. ($(libm-test-c-narrow-obj)): Likewise. (regen-ulps): Likewise. * math/README.libm-test: Update references to gen-libm-test.pl. * math/libm-test-driver.c (struct test_fj_f_data): Update comment referencing gen-libm-test.pl. * math/libm-test-nexttoward.inc (nexttoward_test_data): Likewise. * math/libm-test-support.c: Likewise. * math/libm-test-support.h: Likewise. * sysdeps/generic/libm-test-ulps: Likewise.
2018-08-09 23:34:12 +08:00
/* Strictly speaking, a j type argument is one gen-libm-test.py will not
Move non-function-specific parts of libm-test.inc to separate file. libm-test.inc contains both test infrastructure and tests of individual functions. This patch moves the infrastructure to a separate file libm-test-driver.c. This is in preparation for splitting the tests of individual functions into separate source files, which will be processed individually by gen-libm-test.pl (so e.g. libm-test-acos.inc and auto-libm-test-out-acos will be processed by gen-libm-test.pl to produce libm-test-acos.c, and files such as test-double-acos.c will be generated by the Makefile to include appropriate headers, libm-test-driver.c and libm-test-acos.c so tests of each function get run separately). It is no doubt possible to split things up further, so that functions not depending on the type being tested only get compiled once and most of those depending on the type being tested get compiled once per type (rather than separately for variants such as inline / no-inline, and separately for each function being tested after that split), but this rearrangement as-is seems a useful incremental step towards splitting these tests by function. * math/libm-test-driver.c: New file. Based on math/libm-test.inc. * math/libm-test.inc: Move all contents, other than tests of individual functions, to libm-test-driver.c. [!FE_TONEAREST] (FE_TONEAREST): Move to libm-test-driver.c. [!FE_TOWARDZERO] (FE_TOWARDZERO): Likewise. [!FE_UPWARD] (FE_UPWARD): Likewise. [!FE_DOWNWARD] (FE_DOWNWARD): Likewise. (NO_EXCEPTION): Likewise. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ULP_IDX): Likewise. (QTYPE_STR): Likewise. (TEST_COND_binary32): Likewise. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (lit_pi_3_m_4_d): Likewise. (lit_pi_3_m_4_ln10_m_d): Likewise. (lit_pi_2_ln10_m_d): Likewise. (lit_pi_4_ln10_m_d): Likewise. (lit_pi_ln10_d): Likewise. (lit_pi_2_d): Likewise. (lit_pi_4_d): Likewise. (lit_pi): Likewise. (lit_e): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (plus_zero): Likewise. (minus_zero): Likewise. (plus_infty): Likewise. (minus_infty): Likewise. (qnan_value_pl): Likewise. (qnan_value): Likewise. (snan_value_pl): Likewise. (snan_value): Likewise. (max_value): Likewise. (min_value): Likewise. (min_subnorm_value): Likewise. (snan_value_ld): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (struct test_f_f_data): Likewise. (struct test_ff_f_data): Likewise. (struct test_fj_f_data): Likewise. (struct test_fi_f_data): Likewise. (struct test_fl_f_data): Likewise. (struct test_if_f_data): Likewise. (struct test_fff_f_data): Likewise. (struct test_fiu_M_data): Likewise. (struct test_fiu_U_data): Likewise. (struct test_c_f_data): Likewise. (struct test_f_f1_data): Likewise. (struct test_fF_f1_data): Likewise. (struct test_ffI_f1_data): Likewise. (struct test_c_c_data): Likewise. (struct test_cc_c_data): Likewise. (struct test_f_i_data): Likewise. (struct test_ff_i_data): Likewise. (struct test_f_l_data): Likewise. (struct test_f_L_data): Likewise. (struct test_fFF_11_data): Likewise. (struct test_Ff_b1_data): Likewise. (IF_ROUND_INIT_): Likewise. (IF_ROUND_INIT_FE_DOWNWARD): Likewise. (IF_ROUND_INIT_FE_TONEAREST): Likewise. (IF_ROUND_INIT_FE_TOWARDZERO): Likewise. (IF_ROUND_INIT_FE_UPWARD): Likewise. (ROUND_RESTORE_): Likewise. (ROUND_RESTORE_FE_DOWNWARD): Likewise. (ROUND_RESTORE_FE_TONEAREST): Likewise. (ROUND_RESTORE_FE_TOWARDZERO): Likewise. (ROUND_RESTORE_FE_UPWARD): Likewise. (RM_): Likewise. (RM_FE_DOWNWARD): Likewise. (RM_FE_TONEAREST): Likewise. (RM_FE_TOWARDZERO): Likewise. (RM_FE_UPWARD): Likewise. (COMMON_TEST_SETUP): Likewise. (EXTRA_OUTPUT_TEST_SETUP): Likewise. (COMMON_TEST_CLEANUP): Likewise. (EXTRA_OUTPUT_TEST_CLEANUP): Likewise. (RUN_TEST_f_f): Likewise. (RUN_TEST_LOOP_f_f): Likewise. (RUN_TEST_fp_f): Likewise. (RUN_TEST_LOOP_fp_f): Likewise. (RUN_TEST_2_f): Likewise. (RUN_TEST_LOOP_2_f): Likewise. (RUN_TEST_ff_f): Likewise. (RUN_TEST_LOOP_ff_f): Likewise. (RUN_TEST_LOOP_fj_f): Likewise. (RUN_TEST_fi_f): Likewise. (RUN_TEST_LOOP_fi_f): Likewise. (RUN_TEST_fl_f): Likewise. (RUN_TEST_LOOP_fl_f): Likewise. (RUN_TEST_if_f): Likewise. (RUN_TEST_LOOP_if_f): Likewise. (RUN_TEST_fff_f): Likewise. (RUN_TEST_LOOP_fff_f): Likewise. (RUN_TEST_fiu_M): Likewise. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (RUN_TEST_c_f): Likewise. (RUN_TEST_LOOP_c_f): Likewise. (RUN_TEST_f_f1): Likewise. (RUN_TEST_LOOP_f_f1): Likewise. (RUN_TEST_fF_f1): Likewise. (RUN_TEST_LOOP_fF_f1): Likewise. (RUN_TEST_fI_f1): Likewise. (RUN_TEST_LOOP_fI_f1): Likewise. (RUN_TEST_ffI_f1_mod8): Likewise. (RUN_TEST_LOOP_ffI_f1_mod8): Likewise. (RUN_TEST_Ff_b1): Likewise. (RUN_TEST_LOOP_Ff_b1): Likewise. (RUN_TEST_Ffp_b1): Likewise. (RUN_TEST_LOOP_Ffp_b1): Likewise. (RUN_TEST_c_c): Likewise. (RUN_TEST_LOOP_c_c): Likewise. (RUN_TEST_cc_c): Likewise. (RUN_TEST_LOOP_cc_c): Likewise. (RUN_TEST_f_i): Likewise. (RUN_TEST_LOOP_f_i): Likewise. (RUN_TEST_f_i_tg): Likewise. (RUN_TEST_LOOP_f_i_tg): Likewise. (RUN_TEST_ff_b): Likewise. (RUN_TEST_LOOP_ff_b): Likewise. (RUN_TEST_ff_i_tg): Likewise. (RUN_TEST_LOOP_ff_i_tg): Likewise. (RUN_TEST_f_b): Likewise. (RUN_TEST_LOOP_f_b): Likewise. (RUN_TEST_f_b_tg): Likewise. (RUN_TEST_LOOP_f_b_tg): Likewise. (RUN_TEST_f_l): Likewise. (RUN_TEST_LOOP_f_l): Likewise. (RUN_TEST_f_L): Likewise. (RUN_TEST_LOOP_f_L): Likewise. (RUN_TEST_fFF_11): Likewise. (RUN_TEST_LOOP_fFF_11): Likewise. (VEC_SUFF): Likewise. (STR_CONCAT): Likewise. (STR_CON3): Likewise. (HAVE_VECTOR): Likewise. (START): Likewise. (END): Likewise. (END_COMPLEX): Likewise. (ALL_RM_TEST): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Likewise. (parse_opt): Likewise. (argp): Likewise. (check_ulp): Likewise. (main): Likewise. (do_test): New function. Call tests of individual functions previously called from main.
2017-02-07 02:12:16 +08:00
attempt to muck with. For now, it is only used to prevent it from
mucking up an explicitly long double argument. */
struct test_fj_f_data
{
const char *arg_str;
FLOAT arg1;
long double arg2;
struct
{
FLOAT expected;
int exceptions;
} rd, rn, rz, ru;
};
Add test infrastructure for narrowing libm functions. This patch continues preparations for adding TS 18661-1 narrowing libm functions by adding the required testsuite infrastructure to test such functions through the libm-test infrastructure. That infrastructure is based around testing for a single type, FLOAT. For the narrowing functions, FLOAT, the "main" type for testing, is the function return type; the argument type is ARG_FLOAT. This is consistent with how the code built once for each type, libm-test-support.c, depends on FLOAT for such things as calculating ulps errors in results but can already handle different argument types (pointers, integers, long double for nexttoward). Makefile machinery is added to handle building tests for all pairs of types for which there are narrowing functions (as with non-narrowing functions, aliases are tested just the same as the functions they alias). gen-auto-libm-tests gains a --narrow option for building outputs for narrowing functions (so narrowing sqrt and fma will share the same inputs as non-narrowing, but gen-auto-libm-tests will be run with and without that option to generate different output files). In the narrowing case, the auto-libm-test-out-narrow-* files include annotations for each test about what properties ARG_FLOAT must have to be able to represent all the inputs for that test; those annotations result in calls to the TEST_COND_arg_fmt macro. gen-libm-test.pl has some minor updates to handle narrowing tests (for example, arguments in such tests must be surrounded by ARG_LIT calls instead of LIT calls). Various new macros are added to the C test support code (for example, sNaN initializers need to be properly typed, so arg_snan_value is added; other such arg_* macros are added as it seems cleanest to do so, though some are not strictly required). Special-casing of the ibm128 format to allow for its limitations is adjusted to handle it as the argument format as well as as the result format; thus, the tests of the new functions allow nonzero ulps only in the case where ibm128 is the argument format, as otherwise the functions correspond to fully-defined IEEE operations. The ulps in question appear as e.g. 'Function: "add_ldouble"' in libm-test-ulps (with 1ulp errors then listed for double and float for that function in powerpc); no support is added to generate corresponding faddl / daddl ulps listings in the ulps table in the manual. For the previous patch, I noted the need to avoid spurious macro expansions of identifiers such as "add". A test test-narrow-macros.c is added to verify such macro expansions are successfully avoided, and there is also a -mlong-double-64 version of that test for ldbl-opt. This test is set up to cover the full set of relevant identifiers from the start rather than adding functions one at a time as each function group is added. Tested for x86_64 (this patch in isolation, as well as testing for various configurations in conjunction with the actual addition of "add" functions). * math/Makefile (test-type-pairs): New variable. (test-type-pairs-f64xf128-yes): Likewise. (tests): Add test-narrow-macros. (libm-test-funcs-narrow): New variable. (libm-test-c-narrow): Likewise. (generated): Add $(libm-test-c-narrow). (libm-tests-base-narrow): New variable. (libm-tests-narrow): Likewise. (libm-tests): Add $(libm-tests-narrow). (libm-tests-for-type): Handle $(libm-tests-narrow). (libm-test-c-narrow-obj): New variable. ($(libm-test-c-narrow-obj)): New rule. ($(foreach t,$(libm-tests-narrow),$(objpfx)$(t).c)): Likewise. ($(foreach f,$(libm-test-funcs-narrow),$(objpfx)$(o)-$(f).o)): Use $(o-iterator) to set dependencies and CFLAGS. * math/gen-auto-libm-tests.c: Document use for narrowing functions. (output_for_one_input_case): Take argument NARROW. (generate_output): Likewise. Update call to output_for_one_input_case. (main): Take --narrow option. Update call to generate_output. * math/gen-libm-test.pl (_apply_lit): Take macro name as argument. (apply_lit): Update call to _apply_lit. (apply_arglit): New function. (parse_args): Handle "a" arguments. (parse_auto_input): Handle format names using ":". * math/README.libm-test: Document "a" parameter type. * math/libm-test-support.h (ARG_TYPE_MIN): New macro. (ARG_TYPE_TRUE_MIN): Likewise. (ARG_TYPE_MAX): Likwise. (ARG_MIN_EXP): Likewise. (ARG_MAX_EXP): Likewise. (ARG_MANT_DIG): Likewise. (TEST_COND_arg_ibm128): Likewise. (TEST_COND_ibm128_libgcc): Define conditional on [ARG_FLOAT]. (TEST_COND_arg_fmt): New macro. (init_max_error): Update prototype. * math/libm-test-support.c (test_ibm128): New variable. (init_max_error): Take argument testing_ibm128 and set test_ibm128 instead of using [TEST_COND_ibm128] conditional. (test_exceptions): Use test_ibm128 instead of TEST_COND_ibm128. * math/libm-test-driver.c (STR_ARG_FLOAT): New macro. [TEST_NARROW] (TEST_MSG): New definition. (arg_plus_zero): New macro. (arg_minus_zero): Likewise. (arg_plus_infty): Likewise. (arg_minus_infty): Likewise. (arg_qnan_value_pl): Likewise. (arg_qnan_value): Likewise. (arg_snan_value_pl): Likewise. (arg_snan_value): Likewise. (arg_max_value): Likewise. (arg_min_value): Likewise. (arg_min_subnorm_value): Likewise. [ARG_FLOAT] (struct test_aa_f_data): New struct type. (RUN_TEST_LOOP_aa_f): New macro. (TEST_SUFF): New macro. (TEST_SUFF_STR): Likewise. [!TEST_MATHVEC] (VEC_SUFF): Don't define. (TEST_COND_any_ibm128): New macro. (START): Use TEST_SUFF and TEST_SUFF_STR in initializer for this_func. Update call to init_max_error. * math/test-double.h (FUNC_NARROW_PREFIX): New macro. * math/test-float.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float128.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-math-scalar.h (TEST_NARROW): Likewise. * math/test-math-vector.h (TEST_NARROW): Likewise. * math/test-arg-double.h: New file. * math/test-arg-float128.h: Likewise. * math/test-arg-float32x.h: Likewise. * math/test-arg-float64.h: Likewise. * math/test-arg-float64x.h: Likewise. * math/test-arg-ldouble.h: Likewise. * math/test-math-narrow.h: Likewise. * math/test-narrow-macros.c: Likewise. * sysdeps/ieee754/ldbl-opt/test-narrow-macros-ldbl-64.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (tests): Add test-narrow-macros-ldbl-64. (CFLAGS-test-narrow-macros-ldbl-64.c): New variable.
2018-02-10 05:55:48 +08:00
#ifdef ARG_FLOAT
Add narrowing square root functions This patch adds the narrowing square root functions from TS 18661-1 / TS 18661-3 / C2X to glibc's libm: fsqrt, fsqrtl, dsqrtl, f32sqrtf64, f32sqrtf32x, f32xsqrtf64 for all configurations; f32sqrtf64x, f32sqrtf128, f64sqrtf64x, f64sqrtf128, f32xsqrtf64x, f32xsqrtf128, f64xsqrtf128 for configurations with _Float64x and _Float128; __f32sqrtieee128 and __f64sqrtieee128 aliases in the powerpc64le case (for calls to fsqrtl and dsqrtl when long double is IEEE binary128). Corresponding tgmath.h macro support is also added. The changes are mostly similar to those for the other narrowing functions previously added, so the description of those generally applies to this patch as well. However, the not-actually-narrowing cases (where the two types involved in the function have the same floating-point format) are aliased to sqrt, sqrtl or sqrtf128 rather than needing a separately built not-actually-narrowing function such as was needed for add / sub / mul / div. Thus, there is no __nldbl_dsqrtl name for ldbl-opt because no such name was needed (whereas the other functions needed such a name since the only other name for that entry point was e.g. f32xaddf64, not reserved by TS 18661-1); the headers are made to arrange for sqrt to be called in that case instead. The DIAG_* calls in sysdeps/ieee754/soft-fp/s_dsqrtl.c are because they were observed to be needed in GCC 7 testing of riscv32-linux-gnu-rv32imac-ilp32. The other sysdeps/ieee754/soft-fp/ files added didn't need such DIAG_* in any configuration I tested with build-many-glibcs.py, but if they do turn out to be needed in more files with some other configuration / GCC version, they can always be added there. I reused the same test inputs in auto-libm-test-in as for non-narrowing sqrt rather than adding extra or separate inputs for narrowing sqrt. The tests in libm-test-narrow-sqrt.inc also follow those for non-narrowing sqrt. Tested as followed: natively with the full glibc testsuite for x86_64 (GCC 11, 7, 6) and x86 (GCC 11); with build-many-glibcs.py with GCC 11, 7 and 6; cross testing of math/ tests for powerpc64le, powerpc32 hard float, mips64 (all three ABIs, both hard and soft float). The different GCC versions are to cover the different cases in tgmath.h and tgmath.h tests properly (GCC 6 has _Float* only as typedefs in glibc headers, GCC 7 has proper _Float* support, GCC 8 adds __builtin_tgmath).
2021-09-11 04:56:22 +08:00
struct test_a_f_data
{
const char *arg_str;
ARG_FLOAT arg;
struct
{
FLOAT expected;
int exceptions;
} rd, rn, rz, ru;
};
Add test infrastructure for narrowing libm functions. This patch continues preparations for adding TS 18661-1 narrowing libm functions by adding the required testsuite infrastructure to test such functions through the libm-test infrastructure. That infrastructure is based around testing for a single type, FLOAT. For the narrowing functions, FLOAT, the "main" type for testing, is the function return type; the argument type is ARG_FLOAT. This is consistent with how the code built once for each type, libm-test-support.c, depends on FLOAT for such things as calculating ulps errors in results but can already handle different argument types (pointers, integers, long double for nexttoward). Makefile machinery is added to handle building tests for all pairs of types for which there are narrowing functions (as with non-narrowing functions, aliases are tested just the same as the functions they alias). gen-auto-libm-tests gains a --narrow option for building outputs for narrowing functions (so narrowing sqrt and fma will share the same inputs as non-narrowing, but gen-auto-libm-tests will be run with and without that option to generate different output files). In the narrowing case, the auto-libm-test-out-narrow-* files include annotations for each test about what properties ARG_FLOAT must have to be able to represent all the inputs for that test; those annotations result in calls to the TEST_COND_arg_fmt macro. gen-libm-test.pl has some minor updates to handle narrowing tests (for example, arguments in such tests must be surrounded by ARG_LIT calls instead of LIT calls). Various new macros are added to the C test support code (for example, sNaN initializers need to be properly typed, so arg_snan_value is added; other such arg_* macros are added as it seems cleanest to do so, though some are not strictly required). Special-casing of the ibm128 format to allow for its limitations is adjusted to handle it as the argument format as well as as the result format; thus, the tests of the new functions allow nonzero ulps only in the case where ibm128 is the argument format, as otherwise the functions correspond to fully-defined IEEE operations. The ulps in question appear as e.g. 'Function: "add_ldouble"' in libm-test-ulps (with 1ulp errors then listed for double and float for that function in powerpc); no support is added to generate corresponding faddl / daddl ulps listings in the ulps table in the manual. For the previous patch, I noted the need to avoid spurious macro expansions of identifiers such as "add". A test test-narrow-macros.c is added to verify such macro expansions are successfully avoided, and there is also a -mlong-double-64 version of that test for ldbl-opt. This test is set up to cover the full set of relevant identifiers from the start rather than adding functions one at a time as each function group is added. Tested for x86_64 (this patch in isolation, as well as testing for various configurations in conjunction with the actual addition of "add" functions). * math/Makefile (test-type-pairs): New variable. (test-type-pairs-f64xf128-yes): Likewise. (tests): Add test-narrow-macros. (libm-test-funcs-narrow): New variable. (libm-test-c-narrow): Likewise. (generated): Add $(libm-test-c-narrow). (libm-tests-base-narrow): New variable. (libm-tests-narrow): Likewise. (libm-tests): Add $(libm-tests-narrow). (libm-tests-for-type): Handle $(libm-tests-narrow). (libm-test-c-narrow-obj): New variable. ($(libm-test-c-narrow-obj)): New rule. ($(foreach t,$(libm-tests-narrow),$(objpfx)$(t).c)): Likewise. ($(foreach f,$(libm-test-funcs-narrow),$(objpfx)$(o)-$(f).o)): Use $(o-iterator) to set dependencies and CFLAGS. * math/gen-auto-libm-tests.c: Document use for narrowing functions. (output_for_one_input_case): Take argument NARROW. (generate_output): Likewise. Update call to output_for_one_input_case. (main): Take --narrow option. Update call to generate_output. * math/gen-libm-test.pl (_apply_lit): Take macro name as argument. (apply_lit): Update call to _apply_lit. (apply_arglit): New function. (parse_args): Handle "a" arguments. (parse_auto_input): Handle format names using ":". * math/README.libm-test: Document "a" parameter type. * math/libm-test-support.h (ARG_TYPE_MIN): New macro. (ARG_TYPE_TRUE_MIN): Likewise. (ARG_TYPE_MAX): Likwise. (ARG_MIN_EXP): Likewise. (ARG_MAX_EXP): Likewise. (ARG_MANT_DIG): Likewise. (TEST_COND_arg_ibm128): Likewise. (TEST_COND_ibm128_libgcc): Define conditional on [ARG_FLOAT]. (TEST_COND_arg_fmt): New macro. (init_max_error): Update prototype. * math/libm-test-support.c (test_ibm128): New variable. (init_max_error): Take argument testing_ibm128 and set test_ibm128 instead of using [TEST_COND_ibm128] conditional. (test_exceptions): Use test_ibm128 instead of TEST_COND_ibm128. * math/libm-test-driver.c (STR_ARG_FLOAT): New macro. [TEST_NARROW] (TEST_MSG): New definition. (arg_plus_zero): New macro. (arg_minus_zero): Likewise. (arg_plus_infty): Likewise. (arg_minus_infty): Likewise. (arg_qnan_value_pl): Likewise. (arg_qnan_value): Likewise. (arg_snan_value_pl): Likewise. (arg_snan_value): Likewise. (arg_max_value): Likewise. (arg_min_value): Likewise. (arg_min_subnorm_value): Likewise. [ARG_FLOAT] (struct test_aa_f_data): New struct type. (RUN_TEST_LOOP_aa_f): New macro. (TEST_SUFF): New macro. (TEST_SUFF_STR): Likewise. [!TEST_MATHVEC] (VEC_SUFF): Don't define. (TEST_COND_any_ibm128): New macro. (START): Use TEST_SUFF and TEST_SUFF_STR in initializer for this_func. Update call to init_max_error. * math/test-double.h (FUNC_NARROW_PREFIX): New macro. * math/test-float.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float128.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-math-scalar.h (TEST_NARROW): Likewise. * math/test-math-vector.h (TEST_NARROW): Likewise. * math/test-arg-double.h: New file. * math/test-arg-float128.h: Likewise. * math/test-arg-float32x.h: Likewise. * math/test-arg-float64.h: Likewise. * math/test-arg-float64x.h: Likewise. * math/test-arg-ldouble.h: Likewise. * math/test-math-narrow.h: Likewise. * math/test-narrow-macros.c: Likewise. * sysdeps/ieee754/ldbl-opt/test-narrow-macros-ldbl-64.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (tests): Add test-narrow-macros-ldbl-64. (CFLAGS-test-narrow-macros-ldbl-64.c): New variable.
2018-02-10 05:55:48 +08:00
struct test_aa_f_data
{
const char *arg_str;
ARG_FLOAT arg1, arg2;
struct
{
FLOAT expected;
int exceptions;
} rd, rn, rz, ru;
};
Add narrowing fma functions This patch adds the narrowing fused multiply-add functions from TS 18661-1 / TS 18661-3 / C2X to glibc's libm: ffma, ffmal, dfmal, f32fmaf64, f32fmaf32x, f32xfmaf64 for all configurations; f32fmaf64x, f32fmaf128, f64fmaf64x, f64fmaf128, f32xfmaf64x, f32xfmaf128, f64xfmaf128 for configurations with _Float64x and _Float128; __f32fmaieee128 and __f64fmaieee128 aliases in the powerpc64le case (for calls to ffmal and dfmal when long double is IEEE binary128). Corresponding tgmath.h macro support is also added. The changes are mostly similar to those for the other narrowing functions previously added, especially that for sqrt, so the description of those generally applies to this patch as well. As with sqrt, I reused the same test inputs in auto-libm-test-in as for non-narrowing fma rather than adding extra or separate inputs for narrowing fma. The tests in libm-test-narrow-fma.inc also follow those for non-narrowing fma. The non-narrowing fma has a known bug (bug 6801) that it does not set errno on errors (overflow, underflow, Inf * 0, Inf - Inf). Rather than fixing this or having narrowing fma check for errors when non-narrowing does not (complicating the cases when narrowing fma can otherwise be an alias for a non-narrowing function), this patch does not attempt to check for errors from narrowing fma and set errno; the CHECK_NARROW_FMA macro is still present, but as a placeholder that does nothing, and this missing errno setting is considered to be covered by the existing bug rather than needing a separate open bug. missing-errno annotations are duly added to many of the auto-libm-test-in test inputs for fma. This completes adding all the new functions from TS 18661-1 to glibc, so will be followed by corresponding stdc-predef.h changes to define __STDC_IEC_60559_BFP__ and __STDC_IEC_60559_COMPLEX__, as the support for TS 18661-1 will be at a similar level to that for C standard floating-point facilities up to C11 (pragmas not implemented, but library functions done). (There are still further changes to be done to implement changes to the types of fromfp functions from N2548.) Tested as followed: natively with the full glibc testsuite for x86_64 (GCC 11, 7, 6) and x86 (GCC 11); with build-many-glibcs.py with GCC 11, 7 and 6; cross testing of math/ tests for powerpc64le, powerpc32 hard float, mips64 (all three ABIs, both hard and soft float). The different GCC versions are to cover the different cases in tgmath.h and tgmath.h tests properly (GCC 6 has _Float* only as typedefs in glibc headers, GCC 7 has proper _Float* support, GCC 8 adds __builtin_tgmath).
2021-09-23 05:25:31 +08:00
struct test_aaa_f_data
{
const char *arg_str;
ARG_FLOAT arg1, arg2, arg3;
struct
{
FLOAT expected;
int exceptions;
} rd, rn, rz, ru;
};
Add test infrastructure for narrowing libm functions. This patch continues preparations for adding TS 18661-1 narrowing libm functions by adding the required testsuite infrastructure to test such functions through the libm-test infrastructure. That infrastructure is based around testing for a single type, FLOAT. For the narrowing functions, FLOAT, the "main" type for testing, is the function return type; the argument type is ARG_FLOAT. This is consistent with how the code built once for each type, libm-test-support.c, depends on FLOAT for such things as calculating ulps errors in results but can already handle different argument types (pointers, integers, long double for nexttoward). Makefile machinery is added to handle building tests for all pairs of types for which there are narrowing functions (as with non-narrowing functions, aliases are tested just the same as the functions they alias). gen-auto-libm-tests gains a --narrow option for building outputs for narrowing functions (so narrowing sqrt and fma will share the same inputs as non-narrowing, but gen-auto-libm-tests will be run with and without that option to generate different output files). In the narrowing case, the auto-libm-test-out-narrow-* files include annotations for each test about what properties ARG_FLOAT must have to be able to represent all the inputs for that test; those annotations result in calls to the TEST_COND_arg_fmt macro. gen-libm-test.pl has some minor updates to handle narrowing tests (for example, arguments in such tests must be surrounded by ARG_LIT calls instead of LIT calls). Various new macros are added to the C test support code (for example, sNaN initializers need to be properly typed, so arg_snan_value is added; other such arg_* macros are added as it seems cleanest to do so, though some are not strictly required). Special-casing of the ibm128 format to allow for its limitations is adjusted to handle it as the argument format as well as as the result format; thus, the tests of the new functions allow nonzero ulps only in the case where ibm128 is the argument format, as otherwise the functions correspond to fully-defined IEEE operations. The ulps in question appear as e.g. 'Function: "add_ldouble"' in libm-test-ulps (with 1ulp errors then listed for double and float for that function in powerpc); no support is added to generate corresponding faddl / daddl ulps listings in the ulps table in the manual. For the previous patch, I noted the need to avoid spurious macro expansions of identifiers such as "add". A test test-narrow-macros.c is added to verify such macro expansions are successfully avoided, and there is also a -mlong-double-64 version of that test for ldbl-opt. This test is set up to cover the full set of relevant identifiers from the start rather than adding functions one at a time as each function group is added. Tested for x86_64 (this patch in isolation, as well as testing for various configurations in conjunction with the actual addition of "add" functions). * math/Makefile (test-type-pairs): New variable. (test-type-pairs-f64xf128-yes): Likewise. (tests): Add test-narrow-macros. (libm-test-funcs-narrow): New variable. (libm-test-c-narrow): Likewise. (generated): Add $(libm-test-c-narrow). (libm-tests-base-narrow): New variable. (libm-tests-narrow): Likewise. (libm-tests): Add $(libm-tests-narrow). (libm-tests-for-type): Handle $(libm-tests-narrow). (libm-test-c-narrow-obj): New variable. ($(libm-test-c-narrow-obj)): New rule. ($(foreach t,$(libm-tests-narrow),$(objpfx)$(t).c)): Likewise. ($(foreach f,$(libm-test-funcs-narrow),$(objpfx)$(o)-$(f).o)): Use $(o-iterator) to set dependencies and CFLAGS. * math/gen-auto-libm-tests.c: Document use for narrowing functions. (output_for_one_input_case): Take argument NARROW. (generate_output): Likewise. Update call to output_for_one_input_case. (main): Take --narrow option. Update call to generate_output. * math/gen-libm-test.pl (_apply_lit): Take macro name as argument. (apply_lit): Update call to _apply_lit. (apply_arglit): New function. (parse_args): Handle "a" arguments. (parse_auto_input): Handle format names using ":". * math/README.libm-test: Document "a" parameter type. * math/libm-test-support.h (ARG_TYPE_MIN): New macro. (ARG_TYPE_TRUE_MIN): Likewise. (ARG_TYPE_MAX): Likwise. (ARG_MIN_EXP): Likewise. (ARG_MAX_EXP): Likewise. (ARG_MANT_DIG): Likewise. (TEST_COND_arg_ibm128): Likewise. (TEST_COND_ibm128_libgcc): Define conditional on [ARG_FLOAT]. (TEST_COND_arg_fmt): New macro. (init_max_error): Update prototype. * math/libm-test-support.c (test_ibm128): New variable. (init_max_error): Take argument testing_ibm128 and set test_ibm128 instead of using [TEST_COND_ibm128] conditional. (test_exceptions): Use test_ibm128 instead of TEST_COND_ibm128. * math/libm-test-driver.c (STR_ARG_FLOAT): New macro. [TEST_NARROW] (TEST_MSG): New definition. (arg_plus_zero): New macro. (arg_minus_zero): Likewise. (arg_plus_infty): Likewise. (arg_minus_infty): Likewise. (arg_qnan_value_pl): Likewise. (arg_qnan_value): Likewise. (arg_snan_value_pl): Likewise. (arg_snan_value): Likewise. (arg_max_value): Likewise. (arg_min_value): Likewise. (arg_min_subnorm_value): Likewise. [ARG_FLOAT] (struct test_aa_f_data): New struct type. (RUN_TEST_LOOP_aa_f): New macro. (TEST_SUFF): New macro. (TEST_SUFF_STR): Likewise. [!TEST_MATHVEC] (VEC_SUFF): Don't define. (TEST_COND_any_ibm128): New macro. (START): Use TEST_SUFF and TEST_SUFF_STR in initializer for this_func. Update call to init_max_error. * math/test-double.h (FUNC_NARROW_PREFIX): New macro. * math/test-float.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float128.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-math-scalar.h (TEST_NARROW): Likewise. * math/test-math-vector.h (TEST_NARROW): Likewise. * math/test-arg-double.h: New file. * math/test-arg-float128.h: Likewise. * math/test-arg-float32x.h: Likewise. * math/test-arg-float64.h: Likewise. * math/test-arg-float64x.h: Likewise. * math/test-arg-ldouble.h: Likewise. * math/test-math-narrow.h: Likewise. * math/test-narrow-macros.c: Likewise. * sysdeps/ieee754/ldbl-opt/test-narrow-macros-ldbl-64.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (tests): Add test-narrow-macros-ldbl-64. (CFLAGS-test-narrow-macros-ldbl-64.c): New variable.
2018-02-10 05:55:48 +08:00
#endif
Move non-function-specific parts of libm-test.inc to separate file. libm-test.inc contains both test infrastructure and tests of individual functions. This patch moves the infrastructure to a separate file libm-test-driver.c. This is in preparation for splitting the tests of individual functions into separate source files, which will be processed individually by gen-libm-test.pl (so e.g. libm-test-acos.inc and auto-libm-test-out-acos will be processed by gen-libm-test.pl to produce libm-test-acos.c, and files such as test-double-acos.c will be generated by the Makefile to include appropriate headers, libm-test-driver.c and libm-test-acos.c so tests of each function get run separately). It is no doubt possible to split things up further, so that functions not depending on the type being tested only get compiled once and most of those depending on the type being tested get compiled once per type (rather than separately for variants such as inline / no-inline, and separately for each function being tested after that split), but this rearrangement as-is seems a useful incremental step towards splitting these tests by function. * math/libm-test-driver.c: New file. Based on math/libm-test.inc. * math/libm-test.inc: Move all contents, other than tests of individual functions, to libm-test-driver.c. [!FE_TONEAREST] (FE_TONEAREST): Move to libm-test-driver.c. [!FE_TOWARDZERO] (FE_TOWARDZERO): Likewise. [!FE_UPWARD] (FE_UPWARD): Likewise. [!FE_DOWNWARD] (FE_DOWNWARD): Likewise. (NO_EXCEPTION): Likewise. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ULP_IDX): Likewise. (QTYPE_STR): Likewise. (TEST_COND_binary32): Likewise. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (lit_pi_3_m_4_d): Likewise. (lit_pi_3_m_4_ln10_m_d): Likewise. (lit_pi_2_ln10_m_d): Likewise. (lit_pi_4_ln10_m_d): Likewise. (lit_pi_ln10_d): Likewise. (lit_pi_2_d): Likewise. (lit_pi_4_d): Likewise. (lit_pi): Likewise. (lit_e): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (plus_zero): Likewise. (minus_zero): Likewise. (plus_infty): Likewise. (minus_infty): Likewise. (qnan_value_pl): Likewise. (qnan_value): Likewise. (snan_value_pl): Likewise. (snan_value): Likewise. (max_value): Likewise. (min_value): Likewise. (min_subnorm_value): Likewise. (snan_value_ld): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (struct test_f_f_data): Likewise. (struct test_ff_f_data): Likewise. (struct test_fj_f_data): Likewise. (struct test_fi_f_data): Likewise. (struct test_fl_f_data): Likewise. (struct test_if_f_data): Likewise. (struct test_fff_f_data): Likewise. (struct test_fiu_M_data): Likewise. (struct test_fiu_U_data): Likewise. (struct test_c_f_data): Likewise. (struct test_f_f1_data): Likewise. (struct test_fF_f1_data): Likewise. (struct test_ffI_f1_data): Likewise. (struct test_c_c_data): Likewise. (struct test_cc_c_data): Likewise. (struct test_f_i_data): Likewise. (struct test_ff_i_data): Likewise. (struct test_f_l_data): Likewise. (struct test_f_L_data): Likewise. (struct test_fFF_11_data): Likewise. (struct test_Ff_b1_data): Likewise. (IF_ROUND_INIT_): Likewise. (IF_ROUND_INIT_FE_DOWNWARD): Likewise. (IF_ROUND_INIT_FE_TONEAREST): Likewise. (IF_ROUND_INIT_FE_TOWARDZERO): Likewise. (IF_ROUND_INIT_FE_UPWARD): Likewise. (ROUND_RESTORE_): Likewise. (ROUND_RESTORE_FE_DOWNWARD): Likewise. (ROUND_RESTORE_FE_TONEAREST): Likewise. (ROUND_RESTORE_FE_TOWARDZERO): Likewise. (ROUND_RESTORE_FE_UPWARD): Likewise. (RM_): Likewise. (RM_FE_DOWNWARD): Likewise. (RM_FE_TONEAREST): Likewise. (RM_FE_TOWARDZERO): Likewise. (RM_FE_UPWARD): Likewise. (COMMON_TEST_SETUP): Likewise. (EXTRA_OUTPUT_TEST_SETUP): Likewise. (COMMON_TEST_CLEANUP): Likewise. (EXTRA_OUTPUT_TEST_CLEANUP): Likewise. (RUN_TEST_f_f): Likewise. (RUN_TEST_LOOP_f_f): Likewise. (RUN_TEST_fp_f): Likewise. (RUN_TEST_LOOP_fp_f): Likewise. (RUN_TEST_2_f): Likewise. (RUN_TEST_LOOP_2_f): Likewise. (RUN_TEST_ff_f): Likewise. (RUN_TEST_LOOP_ff_f): Likewise. (RUN_TEST_LOOP_fj_f): Likewise. (RUN_TEST_fi_f): Likewise. (RUN_TEST_LOOP_fi_f): Likewise. (RUN_TEST_fl_f): Likewise. (RUN_TEST_LOOP_fl_f): Likewise. (RUN_TEST_if_f): Likewise. (RUN_TEST_LOOP_if_f): Likewise. (RUN_TEST_fff_f): Likewise. (RUN_TEST_LOOP_fff_f): Likewise. (RUN_TEST_fiu_M): Likewise. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (RUN_TEST_c_f): Likewise. (RUN_TEST_LOOP_c_f): Likewise. (RUN_TEST_f_f1): Likewise. (RUN_TEST_LOOP_f_f1): Likewise. (RUN_TEST_fF_f1): Likewise. (RUN_TEST_LOOP_fF_f1): Likewise. (RUN_TEST_fI_f1): Likewise. (RUN_TEST_LOOP_fI_f1): Likewise. (RUN_TEST_ffI_f1_mod8): Likewise. (RUN_TEST_LOOP_ffI_f1_mod8): Likewise. (RUN_TEST_Ff_b1): Likewise. (RUN_TEST_LOOP_Ff_b1): Likewise. (RUN_TEST_Ffp_b1): Likewise. (RUN_TEST_LOOP_Ffp_b1): Likewise. (RUN_TEST_c_c): Likewise. (RUN_TEST_LOOP_c_c): Likewise. (RUN_TEST_cc_c): Likewise. (RUN_TEST_LOOP_cc_c): Likewise. (RUN_TEST_f_i): Likewise. (RUN_TEST_LOOP_f_i): Likewise. (RUN_TEST_f_i_tg): Likewise. (RUN_TEST_LOOP_f_i_tg): Likewise. (RUN_TEST_ff_b): Likewise. (RUN_TEST_LOOP_ff_b): Likewise. (RUN_TEST_ff_i_tg): Likewise. (RUN_TEST_LOOP_ff_i_tg): Likewise. (RUN_TEST_f_b): Likewise. (RUN_TEST_LOOP_f_b): Likewise. (RUN_TEST_f_b_tg): Likewise. (RUN_TEST_LOOP_f_b_tg): Likewise. (RUN_TEST_f_l): Likewise. (RUN_TEST_LOOP_f_l): Likewise. (RUN_TEST_f_L): Likewise. (RUN_TEST_LOOP_f_L): Likewise. (RUN_TEST_fFF_11): Likewise. (RUN_TEST_LOOP_fFF_11): Likewise. (VEC_SUFF): Likewise. (STR_CONCAT): Likewise. (STR_CON3): Likewise. (HAVE_VECTOR): Likewise. (START): Likewise. (END): Likewise. (END_COMPLEX): Likewise. (ALL_RM_TEST): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Likewise. (parse_opt): Likewise. (argp): Likewise. (check_ulp): Likewise. (main): Likewise. (do_test): New function. Call tests of individual functions previously called from main.
2017-02-07 02:12:16 +08:00
struct test_fi_f_data
{
const char *arg_str;
FLOAT arg1;
int arg2;
struct
{
FLOAT expected;
int exceptions;
} rd, rn, rz, ru;
};
struct test_fl_f_data
{
const char *arg_str;
FLOAT arg1;
long int arg2;
struct
{
FLOAT expected;
int exceptions;
} rd, rn, rz, ru;
};
struct test_if_f_data
{
const char *arg_str;
int arg1;
FLOAT arg2;
struct
{
FLOAT expected;
int exceptions;
} rd, rn, rz, ru;
};
struct test_fff_f_data
{
const char *arg_str;
FLOAT arg1, arg2, arg3;
struct
{
FLOAT expected;
int exceptions;
} rd, rn, rz, ru;
};
struct test_fiu_M_data
{
const char *arg_str;
FLOAT arg1;
int arg2;
unsigned int arg3;
struct
{
intmax_t expected;
int exceptions;
} rd, rn, rz, ru;
};
struct test_fiu_U_data
{
const char *arg_str;
FLOAT arg1;
int arg2;
unsigned int arg3;
struct
{
uintmax_t expected;
int exceptions;
} rd, rn, rz, ru;
};
struct test_c_f_data
{
const char *arg_str;
FLOAT argr, argc;
struct
{
FLOAT expected;
int exceptions;
} rd, rn, rz, ru;
};
/* Used for both RUN_TEST_LOOP_f_f1 and RUN_TEST_LOOP_fI_f1. */
struct test_f_f1_data
{
const char *arg_str;
FLOAT arg;
struct
{
FLOAT expected;
int exceptions;
int extra_test;
int extra_expected;
} rd, rn, rz, ru;
};
struct test_fF_f1_data
{
const char *arg_str;
FLOAT arg;
struct
{
FLOAT expected;
int exceptions;
int extra_test;
FLOAT extra_expected;
} rd, rn, rz, ru;
};
struct test_ffI_f1_data
{
const char *arg_str;
FLOAT arg1, arg2;
struct
{
FLOAT expected;
int exceptions;
int extra_test;
int extra_expected;
} rd, rn, rz, ru;
};
struct test_c_c_data
{
const char *arg_str;
FLOAT argr, argc;
struct
{
FLOAT expr, expc;
int exceptions;
} rd, rn, rz, ru;
};
struct test_cc_c_data
{
const char *arg_str;
FLOAT arg1r, arg1c, arg2r, arg2c;
struct
{
FLOAT expr, expc;
int exceptions;
} rd, rn, rz, ru;
};
/* Used for all of RUN_TEST_LOOP_f_i, RUN_TEST_LOOP_f_i_tg,
RUN_TEST_LOOP_f_b and RUN_TEST_LOOP_f_b_tg. */
struct test_f_i_data
{
const char *arg_str;
FLOAT arg;
struct
{
int expected;
int exceptions;
} rd, rn, rz, ru;
};
/* Used for RUN_TEST_LOOP_f_i_tg_u and RUN_TEST_LOOP_f_b_tg_u. */
#if TEST_COND_intel96
struct test_j_i_data_u
{
const char *arg_str;
ieee_long_double_shape_type arg;
struct
{
int expected;
int exceptions;
} rd, rn, rz, ru;
};
#endif
Make totalorder and totalordermag functions take pointer arguments. The resolution of C floating-point Clarification Request 25 <http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2397.htm#dr_25> is that the totalorder and totalordermag functions should take pointer arguments, and this has been adopted in C2X (with const added; note that the integration of this change into C2X is present in the C standard git repository but postdates the most recent public PDF draft). This patch updates glibc accordingly. As a defect resolution, the API is changed unconditionally rather than supporting any sort of TS 18661-1 mode for compilation with the old version of the API. There are compat symbols for existing binaries that pass floating-point arguments directly. As a consequence of changing to pointer arguments, there are no longer type-generic macros in tgmath.h for these functions. Because of the fairly complicated logic for creating libm function aliases and determining the set of aliases to create in a given glibc configuration, rather than duplicating all that in individual source files to create the versioned and compat symbols, the source files for the various versions of totalorder functions are set up to redefine weak_alias before using libm_alias_* macros to create the symbols required. In turn, this requires creating a separate alias for each symbol version pointing to the same implementation (see binutils bug <https://sourceware.org/bugzilla/show_bug.cgi?id=23840>), which is done automatically using __COUNTER__. (As I noted in <https://sourceware.org/ml/libc-alpha/2018-10/msg00631.html>, it might well make sense for glibc's symbol versioning macros to do that alias creation with __COUNTER__ themselves, which would somewhat simplify the logic in the totalorder source files.) It is of course desirable to test the compat symbols. I did this with the generic libm-test machinery, but didn't wish to duplicate the actual tables of test inputs and outputs, and thought it risky to attempt to have a single object file refer to both default and compat versions of the same function in order to test them together. Thus, I created libm-test-compat_totalorder.inc and libm-test-compat_totalordermag.inc which include the generated .c files (with the processed version of those tables of inputs) from the non-compat tests, and added appropriate dependencies. I think this provides sufficient test coverage for the compat symbols without also needing to make the special ldbl-96 and ldbl-128ibm tests (of peculiarities relating to the representations of those formats that can't be covered in the generic tests) run for the compat symbols. Tests of compat symbols need to be internal tests, meaning _ISOMAC is not defined. Making some libm-test tests into internal tests showed up two other issues. GCC diagnoses duplicate macro definitions of __STDC_* macros, including __STDC_WANT_IEC_60559_TYPES_EXT__; I added an appropriate conditional and filed <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=91451> for this issue. On ia64, include/setjmp.h ends up getting included indirectly from libm-symbols.h, resulting in conflicting definitions of the STR macro (also defined in libm-test-driver.c); I renamed the macros in include/setjmp.h. (It's arguable that we should have common internal headers used everywhere for stringizing and concatenation macros.) Tested for x86_64 and x86, and with build-many-glibcs.py. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN] (totalorder): Take pointer arguments. [__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN] (totalordermag): Likewise. * manual/arith.texi (totalorder): Likewise. (totalorderf): Likewise. (totalorderl): Likewise. (totalorderfN): Likewise. (totalorderfNx): Likewise. (totalordermag): Likewise. (totalordermagf): Likewise. (totalordermagl): Likewise. (totalordermagfN): Likewise. (totalordermagfNx): Likewise. * math/tgmath.h (__TGMATH_BINARY_REAL_RET_ONLY): Remove macro. [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag): Likewise. * math/Versions (GLIBC_2.31): Add totalorder, totalorderf, totalorderl, totalordermag, totalordermagf, totalordermagl, totalorderf32, totalorderf64, totalorderf32x, totalordermagf32, totalordermagf64, totalordermagf32x, totalorderf64x, totalordermagf64x, totalorderf128 and totalordermagf128. * math/Makefile (libm-test-funcs-noauto): Add compat_totalorder and compat_totalordermag. (libm-test-funcs-compat): New variable. (libm-tests-compat): Likewise. (tests): Do not include compat tests. (tests-internal): Add compat tests. ($(foreach t,$(libm-tests-base), $(objpfx)$(t)-compat_totalorder.o)): Depend on $(objpfx)libm-test-totalorder.c. ($(foreach t,$(libm-tests-base), $(objpfx)$(t)-compat_totalordermag.o): Depend on $(objpfx)libm-test-totalordermag.c. (tgmath3-macros): Remove totalorder and totalordermag. * math/libm-test-compat_totalorder.inc: New file. * math/libm-test-compat_totalordermag.inc: Likewise. * math/libm-test-driver.c (struct test_ff_i_data): Update comment. (RUN_TEST_fpfp_b): New macro. (RUN_TEST_LOOP_fpfp_b): Likewise. * math/libm-test-totalorder.inc (totalorder_test_data): Use TEST_fpfp_b. (totalorder_test): Condition on [!COMPAT_TEST]. (do_test): Likewise. * math/libm-test-totalordermag.inc (totalordermag_test_data): Use TEST_fpfp_b. (totalordermag_test): Condition on [!COMPAT_TEST]. (do_test): Likewise. * math/gen-tgmath-tests.py (Tests.add_all_tests): Remove totalorder and totalordermag. * math/test-tgmath.c (NCALLS): Change to 132. (F(compile_test)): Do not call totalorder or totalordermag. (F(totalorder)): Remove. (F(totalordermag)): Likewise. * include/float.h (__STDC_WANT_IEC_60559_TYPES_EXT__): Do not define if [__STDC_WANT_IEC_60559_TYPES_EXT__]. * include/setjmp.h [!_ISOMAC] (STR_HELPER): Rename to SJSTR_HELPER. [!_ISOMAC] (STR): Rename to SJSTR. Update call to STR_HELPER. [!_ISOMAC] (TEST_SIZE): Update call to STR. [!_ISOMAC] (TEST_ALIGN): Likewise. [!_ISOMAC] (TEST_OFFSET): Likewise. * sysdeps/ieee754/dbl-64/s_totalorder.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorder): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/dbl-64/s_totalordermag.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermag): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorder): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermag): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/float128/float128_private.h (__totalorder_compatl): New macro. (__totalordermag_compatl): Likewise. * sysdeps/ieee754/flt-32/s_totalorderf.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorderf): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/flt-32/s_totalordermagf.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermagf): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128/s_totalorderl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorderl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128/s_totalordermagl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermagl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Include <shlib-compat.h>. (__totalorderl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c: Include <shlib-compat.h>. (__totalordermagl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-96/s_totalorderl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorderl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-96/s_totalordermagl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermagl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c (totalorderl): Take pointer arguments. * sysdeps/ieee754/ldbl-opt/nldbl-totalordermag.c (totalordermagl): Likewise. * sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c (do_test): Update calls to totalorderl and totalordermagl. * sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c (do_test): Update calls to totalorderl and totalordermagl. * sysdeps/mach/hurd/i386/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/csky/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2019-08-15 23:18:34 +08:00
/* Used for RUN_TEST_LOOP_ff_b, RUN_TEST_LOOP_fpfp_b and
RUN_TEST_LOOP_ff_i_tg. */
Move non-function-specific parts of libm-test.inc to separate file. libm-test.inc contains both test infrastructure and tests of individual functions. This patch moves the infrastructure to a separate file libm-test-driver.c. This is in preparation for splitting the tests of individual functions into separate source files, which will be processed individually by gen-libm-test.pl (so e.g. libm-test-acos.inc and auto-libm-test-out-acos will be processed by gen-libm-test.pl to produce libm-test-acos.c, and files such as test-double-acos.c will be generated by the Makefile to include appropriate headers, libm-test-driver.c and libm-test-acos.c so tests of each function get run separately). It is no doubt possible to split things up further, so that functions not depending on the type being tested only get compiled once and most of those depending on the type being tested get compiled once per type (rather than separately for variants such as inline / no-inline, and separately for each function being tested after that split), but this rearrangement as-is seems a useful incremental step towards splitting these tests by function. * math/libm-test-driver.c: New file. Based on math/libm-test.inc. * math/libm-test.inc: Move all contents, other than tests of individual functions, to libm-test-driver.c. [!FE_TONEAREST] (FE_TONEAREST): Move to libm-test-driver.c. [!FE_TOWARDZERO] (FE_TOWARDZERO): Likewise. [!FE_UPWARD] (FE_UPWARD): Likewise. [!FE_DOWNWARD] (FE_DOWNWARD): Likewise. (NO_EXCEPTION): Likewise. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ULP_IDX): Likewise. (QTYPE_STR): Likewise. (TEST_COND_binary32): Likewise. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (lit_pi_3_m_4_d): Likewise. (lit_pi_3_m_4_ln10_m_d): Likewise. (lit_pi_2_ln10_m_d): Likewise. (lit_pi_4_ln10_m_d): Likewise. (lit_pi_ln10_d): Likewise. (lit_pi_2_d): Likewise. (lit_pi_4_d): Likewise. (lit_pi): Likewise. (lit_e): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (plus_zero): Likewise. (minus_zero): Likewise. (plus_infty): Likewise. (minus_infty): Likewise. (qnan_value_pl): Likewise. (qnan_value): Likewise. (snan_value_pl): Likewise. (snan_value): Likewise. (max_value): Likewise. (min_value): Likewise. (min_subnorm_value): Likewise. (snan_value_ld): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (struct test_f_f_data): Likewise. (struct test_ff_f_data): Likewise. (struct test_fj_f_data): Likewise. (struct test_fi_f_data): Likewise. (struct test_fl_f_data): Likewise. (struct test_if_f_data): Likewise. (struct test_fff_f_data): Likewise. (struct test_fiu_M_data): Likewise. (struct test_fiu_U_data): Likewise. (struct test_c_f_data): Likewise. (struct test_f_f1_data): Likewise. (struct test_fF_f1_data): Likewise. (struct test_ffI_f1_data): Likewise. (struct test_c_c_data): Likewise. (struct test_cc_c_data): Likewise. (struct test_f_i_data): Likewise. (struct test_ff_i_data): Likewise. (struct test_f_l_data): Likewise. (struct test_f_L_data): Likewise. (struct test_fFF_11_data): Likewise. (struct test_Ff_b1_data): Likewise. (IF_ROUND_INIT_): Likewise. (IF_ROUND_INIT_FE_DOWNWARD): Likewise. (IF_ROUND_INIT_FE_TONEAREST): Likewise. (IF_ROUND_INIT_FE_TOWARDZERO): Likewise. (IF_ROUND_INIT_FE_UPWARD): Likewise. (ROUND_RESTORE_): Likewise. (ROUND_RESTORE_FE_DOWNWARD): Likewise. (ROUND_RESTORE_FE_TONEAREST): Likewise. (ROUND_RESTORE_FE_TOWARDZERO): Likewise. (ROUND_RESTORE_FE_UPWARD): Likewise. (RM_): Likewise. (RM_FE_DOWNWARD): Likewise. (RM_FE_TONEAREST): Likewise. (RM_FE_TOWARDZERO): Likewise. (RM_FE_UPWARD): Likewise. (COMMON_TEST_SETUP): Likewise. (EXTRA_OUTPUT_TEST_SETUP): Likewise. (COMMON_TEST_CLEANUP): Likewise. (EXTRA_OUTPUT_TEST_CLEANUP): Likewise. (RUN_TEST_f_f): Likewise. (RUN_TEST_LOOP_f_f): Likewise. (RUN_TEST_fp_f): Likewise. (RUN_TEST_LOOP_fp_f): Likewise. (RUN_TEST_2_f): Likewise. (RUN_TEST_LOOP_2_f): Likewise. (RUN_TEST_ff_f): Likewise. (RUN_TEST_LOOP_ff_f): Likewise. (RUN_TEST_LOOP_fj_f): Likewise. (RUN_TEST_fi_f): Likewise. (RUN_TEST_LOOP_fi_f): Likewise. (RUN_TEST_fl_f): Likewise. (RUN_TEST_LOOP_fl_f): Likewise. (RUN_TEST_if_f): Likewise. (RUN_TEST_LOOP_if_f): Likewise. (RUN_TEST_fff_f): Likewise. (RUN_TEST_LOOP_fff_f): Likewise. (RUN_TEST_fiu_M): Likewise. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (RUN_TEST_c_f): Likewise. (RUN_TEST_LOOP_c_f): Likewise. (RUN_TEST_f_f1): Likewise. (RUN_TEST_LOOP_f_f1): Likewise. (RUN_TEST_fF_f1): Likewise. (RUN_TEST_LOOP_fF_f1): Likewise. (RUN_TEST_fI_f1): Likewise. (RUN_TEST_LOOP_fI_f1): Likewise. (RUN_TEST_ffI_f1_mod8): Likewise. (RUN_TEST_LOOP_ffI_f1_mod8): Likewise. (RUN_TEST_Ff_b1): Likewise. (RUN_TEST_LOOP_Ff_b1): Likewise. (RUN_TEST_Ffp_b1): Likewise. (RUN_TEST_LOOP_Ffp_b1): Likewise. (RUN_TEST_c_c): Likewise. (RUN_TEST_LOOP_c_c): Likewise. (RUN_TEST_cc_c): Likewise. (RUN_TEST_LOOP_cc_c): Likewise. (RUN_TEST_f_i): Likewise. (RUN_TEST_LOOP_f_i): Likewise. (RUN_TEST_f_i_tg): Likewise. (RUN_TEST_LOOP_f_i_tg): Likewise. (RUN_TEST_ff_b): Likewise. (RUN_TEST_LOOP_ff_b): Likewise. (RUN_TEST_ff_i_tg): Likewise. (RUN_TEST_LOOP_ff_i_tg): Likewise. (RUN_TEST_f_b): Likewise. (RUN_TEST_LOOP_f_b): Likewise. (RUN_TEST_f_b_tg): Likewise. (RUN_TEST_LOOP_f_b_tg): Likewise. (RUN_TEST_f_l): Likewise. (RUN_TEST_LOOP_f_l): Likewise. (RUN_TEST_f_L): Likewise. (RUN_TEST_LOOP_f_L): Likewise. (RUN_TEST_fFF_11): Likewise. (RUN_TEST_LOOP_fFF_11): Likewise. (VEC_SUFF): Likewise. (STR_CONCAT): Likewise. (STR_CON3): Likewise. (HAVE_VECTOR): Likewise. (START): Likewise. (END): Likewise. (END_COMPLEX): Likewise. (ALL_RM_TEST): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Likewise. (parse_opt): Likewise. (argp): Likewise. (check_ulp): Likewise. (main): Likewise. (do_test): New function. Call tests of individual functions previously called from main.
2017-02-07 02:12:16 +08:00
struct test_ff_i_data
{
const char *arg_str;
FLOAT arg1, arg2;
struct
{
int expected;
int exceptions;
} rd, rn, rz, ru;
};
struct test_f_l_data
{
const char *arg_str;
FLOAT arg;
struct
{
long int expected;
int exceptions;
} rd, rn, rz, ru;
};
struct test_f_L_data
{
const char *arg_str;
FLOAT arg;
struct
{
long long int expected;
int exceptions;
} rd, rn, rz, ru;
};
struct test_fFF_11_data
{
const char *arg_str;
FLOAT arg;
struct
{
int exceptions;
int extra1_test;
FLOAT extra1_expected;
int extra2_test;
FLOAT extra2_expected;
} rd, rn, rz, ru;
};
/* Used for both RUN_TEST_LOOP_Ff_b1 and RUN_TEST_LOOP_Ffp_b1. */
struct test_Ff_b1_data
{
const char *arg_str;
FLOAT arg;
struct
{
int expected;
int exceptions;
int extra_test;
FLOAT extra_expected;
} rd, rn, rz, ru;
};
/* Set the rounding mode, or restore the saved value. */
#define IF_ROUND_INIT_ /* Empty. */
#define IF_ROUND_INIT_FE_DOWNWARD \
int save_round_mode = fegetround (); \
if (ROUNDING_TESTS (FLOAT, FE_DOWNWARD) \
&& !TEST_MATHVEC \
Move non-function-specific parts of libm-test.inc to separate file. libm-test.inc contains both test infrastructure and tests of individual functions. This patch moves the infrastructure to a separate file libm-test-driver.c. This is in preparation for splitting the tests of individual functions into separate source files, which will be processed individually by gen-libm-test.pl (so e.g. libm-test-acos.inc and auto-libm-test-out-acos will be processed by gen-libm-test.pl to produce libm-test-acos.c, and files such as test-double-acos.c will be generated by the Makefile to include appropriate headers, libm-test-driver.c and libm-test-acos.c so tests of each function get run separately). It is no doubt possible to split things up further, so that functions not depending on the type being tested only get compiled once and most of those depending on the type being tested get compiled once per type (rather than separately for variants such as inline / no-inline, and separately for each function being tested after that split), but this rearrangement as-is seems a useful incremental step towards splitting these tests by function. * math/libm-test-driver.c: New file. Based on math/libm-test.inc. * math/libm-test.inc: Move all contents, other than tests of individual functions, to libm-test-driver.c. [!FE_TONEAREST] (FE_TONEAREST): Move to libm-test-driver.c. [!FE_TOWARDZERO] (FE_TOWARDZERO): Likewise. [!FE_UPWARD] (FE_UPWARD): Likewise. [!FE_DOWNWARD] (FE_DOWNWARD): Likewise. (NO_EXCEPTION): Likewise. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ULP_IDX): Likewise. (QTYPE_STR): Likewise. (TEST_COND_binary32): Likewise. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (lit_pi_3_m_4_d): Likewise. (lit_pi_3_m_4_ln10_m_d): Likewise. (lit_pi_2_ln10_m_d): Likewise. (lit_pi_4_ln10_m_d): Likewise. (lit_pi_ln10_d): Likewise. (lit_pi_2_d): Likewise. (lit_pi_4_d): Likewise. (lit_pi): Likewise. (lit_e): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (plus_zero): Likewise. (minus_zero): Likewise. (plus_infty): Likewise. (minus_infty): Likewise. (qnan_value_pl): Likewise. (qnan_value): Likewise. (snan_value_pl): Likewise. (snan_value): Likewise. (max_value): Likewise. (min_value): Likewise. (min_subnorm_value): Likewise. (snan_value_ld): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (struct test_f_f_data): Likewise. (struct test_ff_f_data): Likewise. (struct test_fj_f_data): Likewise. (struct test_fi_f_data): Likewise. (struct test_fl_f_data): Likewise. (struct test_if_f_data): Likewise. (struct test_fff_f_data): Likewise. (struct test_fiu_M_data): Likewise. (struct test_fiu_U_data): Likewise. (struct test_c_f_data): Likewise. (struct test_f_f1_data): Likewise. (struct test_fF_f1_data): Likewise. (struct test_ffI_f1_data): Likewise. (struct test_c_c_data): Likewise. (struct test_cc_c_data): Likewise. (struct test_f_i_data): Likewise. (struct test_ff_i_data): Likewise. (struct test_f_l_data): Likewise. (struct test_f_L_data): Likewise. (struct test_fFF_11_data): Likewise. (struct test_Ff_b1_data): Likewise. (IF_ROUND_INIT_): Likewise. (IF_ROUND_INIT_FE_DOWNWARD): Likewise. (IF_ROUND_INIT_FE_TONEAREST): Likewise. (IF_ROUND_INIT_FE_TOWARDZERO): Likewise. (IF_ROUND_INIT_FE_UPWARD): Likewise. (ROUND_RESTORE_): Likewise. (ROUND_RESTORE_FE_DOWNWARD): Likewise. (ROUND_RESTORE_FE_TONEAREST): Likewise. (ROUND_RESTORE_FE_TOWARDZERO): Likewise. (ROUND_RESTORE_FE_UPWARD): Likewise. (RM_): Likewise. (RM_FE_DOWNWARD): Likewise. (RM_FE_TONEAREST): Likewise. (RM_FE_TOWARDZERO): Likewise. (RM_FE_UPWARD): Likewise. (COMMON_TEST_SETUP): Likewise. (EXTRA_OUTPUT_TEST_SETUP): Likewise. (COMMON_TEST_CLEANUP): Likewise. (EXTRA_OUTPUT_TEST_CLEANUP): Likewise. (RUN_TEST_f_f): Likewise. (RUN_TEST_LOOP_f_f): Likewise. (RUN_TEST_fp_f): Likewise. (RUN_TEST_LOOP_fp_f): Likewise. (RUN_TEST_2_f): Likewise. (RUN_TEST_LOOP_2_f): Likewise. (RUN_TEST_ff_f): Likewise. (RUN_TEST_LOOP_ff_f): Likewise. (RUN_TEST_LOOP_fj_f): Likewise. (RUN_TEST_fi_f): Likewise. (RUN_TEST_LOOP_fi_f): Likewise. (RUN_TEST_fl_f): Likewise. (RUN_TEST_LOOP_fl_f): Likewise. (RUN_TEST_if_f): Likewise. (RUN_TEST_LOOP_if_f): Likewise. (RUN_TEST_fff_f): Likewise. (RUN_TEST_LOOP_fff_f): Likewise. (RUN_TEST_fiu_M): Likewise. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (RUN_TEST_c_f): Likewise. (RUN_TEST_LOOP_c_f): Likewise. (RUN_TEST_f_f1): Likewise. (RUN_TEST_LOOP_f_f1): Likewise. (RUN_TEST_fF_f1): Likewise. (RUN_TEST_LOOP_fF_f1): Likewise. (RUN_TEST_fI_f1): Likewise. (RUN_TEST_LOOP_fI_f1): Likewise. (RUN_TEST_ffI_f1_mod8): Likewise. (RUN_TEST_LOOP_ffI_f1_mod8): Likewise. (RUN_TEST_Ff_b1): Likewise. (RUN_TEST_LOOP_Ff_b1): Likewise. (RUN_TEST_Ffp_b1): Likewise. (RUN_TEST_LOOP_Ffp_b1): Likewise. (RUN_TEST_c_c): Likewise. (RUN_TEST_LOOP_c_c): Likewise. (RUN_TEST_cc_c): Likewise. (RUN_TEST_LOOP_cc_c): Likewise. (RUN_TEST_f_i): Likewise. (RUN_TEST_LOOP_f_i): Likewise. (RUN_TEST_f_i_tg): Likewise. (RUN_TEST_LOOP_f_i_tg): Likewise. (RUN_TEST_ff_b): Likewise. (RUN_TEST_LOOP_ff_b): Likewise. (RUN_TEST_ff_i_tg): Likewise. (RUN_TEST_LOOP_ff_i_tg): Likewise. (RUN_TEST_f_b): Likewise. (RUN_TEST_LOOP_f_b): Likewise. (RUN_TEST_f_b_tg): Likewise. (RUN_TEST_LOOP_f_b_tg): Likewise. (RUN_TEST_f_l): Likewise. (RUN_TEST_LOOP_f_l): Likewise. (RUN_TEST_f_L): Likewise. (RUN_TEST_LOOP_f_L): Likewise. (RUN_TEST_fFF_11): Likewise. (RUN_TEST_LOOP_fFF_11): Likewise. (VEC_SUFF): Likewise. (STR_CONCAT): Likewise. (STR_CON3): Likewise. (HAVE_VECTOR): Likewise. (START): Likewise. (END): Likewise. (END_COMPLEX): Likewise. (ALL_RM_TEST): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Likewise. (parse_opt): Likewise. (argp): Likewise. (check_ulp): Likewise. (main): Likewise. (do_test): New function. Call tests of individual functions previously called from main.
2017-02-07 02:12:16 +08:00
&& fesetround (FE_DOWNWARD) == 0)
#define IF_ROUND_INIT_FE_TONEAREST \
int save_round_mode = fegetround (); \
if (ROUNDING_TESTS (FLOAT, FE_TONEAREST) \
&& fesetround (FE_TONEAREST) == 0)
#define IF_ROUND_INIT_FE_TOWARDZERO \
int save_round_mode = fegetround (); \
if (ROUNDING_TESTS (FLOAT, FE_TOWARDZERO) \
&& !TEST_MATHVEC \
Move non-function-specific parts of libm-test.inc to separate file. libm-test.inc contains both test infrastructure and tests of individual functions. This patch moves the infrastructure to a separate file libm-test-driver.c. This is in preparation for splitting the tests of individual functions into separate source files, which will be processed individually by gen-libm-test.pl (so e.g. libm-test-acos.inc and auto-libm-test-out-acos will be processed by gen-libm-test.pl to produce libm-test-acos.c, and files such as test-double-acos.c will be generated by the Makefile to include appropriate headers, libm-test-driver.c and libm-test-acos.c so tests of each function get run separately). It is no doubt possible to split things up further, so that functions not depending on the type being tested only get compiled once and most of those depending on the type being tested get compiled once per type (rather than separately for variants such as inline / no-inline, and separately for each function being tested after that split), but this rearrangement as-is seems a useful incremental step towards splitting these tests by function. * math/libm-test-driver.c: New file. Based on math/libm-test.inc. * math/libm-test.inc: Move all contents, other than tests of individual functions, to libm-test-driver.c. [!FE_TONEAREST] (FE_TONEAREST): Move to libm-test-driver.c. [!FE_TOWARDZERO] (FE_TOWARDZERO): Likewise. [!FE_UPWARD] (FE_UPWARD): Likewise. [!FE_DOWNWARD] (FE_DOWNWARD): Likewise. (NO_EXCEPTION): Likewise. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ULP_IDX): Likewise. (QTYPE_STR): Likewise. (TEST_COND_binary32): Likewise. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (lit_pi_3_m_4_d): Likewise. (lit_pi_3_m_4_ln10_m_d): Likewise. (lit_pi_2_ln10_m_d): Likewise. (lit_pi_4_ln10_m_d): Likewise. (lit_pi_ln10_d): Likewise. (lit_pi_2_d): Likewise. (lit_pi_4_d): Likewise. (lit_pi): Likewise. (lit_e): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (plus_zero): Likewise. (minus_zero): Likewise. (plus_infty): Likewise. (minus_infty): Likewise. (qnan_value_pl): Likewise. (qnan_value): Likewise. (snan_value_pl): Likewise. (snan_value): Likewise. (max_value): Likewise. (min_value): Likewise. (min_subnorm_value): Likewise. (snan_value_ld): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (struct test_f_f_data): Likewise. (struct test_ff_f_data): Likewise. (struct test_fj_f_data): Likewise. (struct test_fi_f_data): Likewise. (struct test_fl_f_data): Likewise. (struct test_if_f_data): Likewise. (struct test_fff_f_data): Likewise. (struct test_fiu_M_data): Likewise. (struct test_fiu_U_data): Likewise. (struct test_c_f_data): Likewise. (struct test_f_f1_data): Likewise. (struct test_fF_f1_data): Likewise. (struct test_ffI_f1_data): Likewise. (struct test_c_c_data): Likewise. (struct test_cc_c_data): Likewise. (struct test_f_i_data): Likewise. (struct test_ff_i_data): Likewise. (struct test_f_l_data): Likewise. (struct test_f_L_data): Likewise. (struct test_fFF_11_data): Likewise. (struct test_Ff_b1_data): Likewise. (IF_ROUND_INIT_): Likewise. (IF_ROUND_INIT_FE_DOWNWARD): Likewise. (IF_ROUND_INIT_FE_TONEAREST): Likewise. (IF_ROUND_INIT_FE_TOWARDZERO): Likewise. (IF_ROUND_INIT_FE_UPWARD): Likewise. (ROUND_RESTORE_): Likewise. (ROUND_RESTORE_FE_DOWNWARD): Likewise. (ROUND_RESTORE_FE_TONEAREST): Likewise. (ROUND_RESTORE_FE_TOWARDZERO): Likewise. (ROUND_RESTORE_FE_UPWARD): Likewise. (RM_): Likewise. (RM_FE_DOWNWARD): Likewise. (RM_FE_TONEAREST): Likewise. (RM_FE_TOWARDZERO): Likewise. (RM_FE_UPWARD): Likewise. (COMMON_TEST_SETUP): Likewise. (EXTRA_OUTPUT_TEST_SETUP): Likewise. (COMMON_TEST_CLEANUP): Likewise. (EXTRA_OUTPUT_TEST_CLEANUP): Likewise. (RUN_TEST_f_f): Likewise. (RUN_TEST_LOOP_f_f): Likewise. (RUN_TEST_fp_f): Likewise. (RUN_TEST_LOOP_fp_f): Likewise. (RUN_TEST_2_f): Likewise. (RUN_TEST_LOOP_2_f): Likewise. (RUN_TEST_ff_f): Likewise. (RUN_TEST_LOOP_ff_f): Likewise. (RUN_TEST_LOOP_fj_f): Likewise. (RUN_TEST_fi_f): Likewise. (RUN_TEST_LOOP_fi_f): Likewise. (RUN_TEST_fl_f): Likewise. (RUN_TEST_LOOP_fl_f): Likewise. (RUN_TEST_if_f): Likewise. (RUN_TEST_LOOP_if_f): Likewise. (RUN_TEST_fff_f): Likewise. (RUN_TEST_LOOP_fff_f): Likewise. (RUN_TEST_fiu_M): Likewise. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (RUN_TEST_c_f): Likewise. (RUN_TEST_LOOP_c_f): Likewise. (RUN_TEST_f_f1): Likewise. (RUN_TEST_LOOP_f_f1): Likewise. (RUN_TEST_fF_f1): Likewise. (RUN_TEST_LOOP_fF_f1): Likewise. (RUN_TEST_fI_f1): Likewise. (RUN_TEST_LOOP_fI_f1): Likewise. (RUN_TEST_ffI_f1_mod8): Likewise. (RUN_TEST_LOOP_ffI_f1_mod8): Likewise. (RUN_TEST_Ff_b1): Likewise. (RUN_TEST_LOOP_Ff_b1): Likewise. (RUN_TEST_Ffp_b1): Likewise. (RUN_TEST_LOOP_Ffp_b1): Likewise. (RUN_TEST_c_c): Likewise. (RUN_TEST_LOOP_c_c): Likewise. (RUN_TEST_cc_c): Likewise. (RUN_TEST_LOOP_cc_c): Likewise. (RUN_TEST_f_i): Likewise. (RUN_TEST_LOOP_f_i): Likewise. (RUN_TEST_f_i_tg): Likewise. (RUN_TEST_LOOP_f_i_tg): Likewise. (RUN_TEST_ff_b): Likewise. (RUN_TEST_LOOP_ff_b): Likewise. (RUN_TEST_ff_i_tg): Likewise. (RUN_TEST_LOOP_ff_i_tg): Likewise. (RUN_TEST_f_b): Likewise. (RUN_TEST_LOOP_f_b): Likewise. (RUN_TEST_f_b_tg): Likewise. (RUN_TEST_LOOP_f_b_tg): Likewise. (RUN_TEST_f_l): Likewise. (RUN_TEST_LOOP_f_l): Likewise. (RUN_TEST_f_L): Likewise. (RUN_TEST_LOOP_f_L): Likewise. (RUN_TEST_fFF_11): Likewise. (RUN_TEST_LOOP_fFF_11): Likewise. (VEC_SUFF): Likewise. (STR_CONCAT): Likewise. (STR_CON3): Likewise. (HAVE_VECTOR): Likewise. (START): Likewise. (END): Likewise. (END_COMPLEX): Likewise. (ALL_RM_TEST): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Likewise. (parse_opt): Likewise. (argp): Likewise. (check_ulp): Likewise. (main): Likewise. (do_test): New function. Call tests of individual functions previously called from main.
2017-02-07 02:12:16 +08:00
&& fesetround (FE_TOWARDZERO) == 0)
#define IF_ROUND_INIT_FE_UPWARD \
int save_round_mode = fegetround (); \
if (ROUNDING_TESTS (FLOAT, FE_UPWARD) \
&& !TEST_MATHVEC \
Move non-function-specific parts of libm-test.inc to separate file. libm-test.inc contains both test infrastructure and tests of individual functions. This patch moves the infrastructure to a separate file libm-test-driver.c. This is in preparation for splitting the tests of individual functions into separate source files, which will be processed individually by gen-libm-test.pl (so e.g. libm-test-acos.inc and auto-libm-test-out-acos will be processed by gen-libm-test.pl to produce libm-test-acos.c, and files such as test-double-acos.c will be generated by the Makefile to include appropriate headers, libm-test-driver.c and libm-test-acos.c so tests of each function get run separately). It is no doubt possible to split things up further, so that functions not depending on the type being tested only get compiled once and most of those depending on the type being tested get compiled once per type (rather than separately for variants such as inline / no-inline, and separately for each function being tested after that split), but this rearrangement as-is seems a useful incremental step towards splitting these tests by function. * math/libm-test-driver.c: New file. Based on math/libm-test.inc. * math/libm-test.inc: Move all contents, other than tests of individual functions, to libm-test-driver.c. [!FE_TONEAREST] (FE_TONEAREST): Move to libm-test-driver.c. [!FE_TOWARDZERO] (FE_TOWARDZERO): Likewise. [!FE_UPWARD] (FE_UPWARD): Likewise. [!FE_DOWNWARD] (FE_DOWNWARD): Likewise. (NO_EXCEPTION): Likewise. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ULP_IDX): Likewise. (QTYPE_STR): Likewise. (TEST_COND_binary32): Likewise. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (lit_pi_3_m_4_d): Likewise. (lit_pi_3_m_4_ln10_m_d): Likewise. (lit_pi_2_ln10_m_d): Likewise. (lit_pi_4_ln10_m_d): Likewise. (lit_pi_ln10_d): Likewise. (lit_pi_2_d): Likewise. (lit_pi_4_d): Likewise. (lit_pi): Likewise. (lit_e): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (plus_zero): Likewise. (minus_zero): Likewise. (plus_infty): Likewise. (minus_infty): Likewise. (qnan_value_pl): Likewise. (qnan_value): Likewise. (snan_value_pl): Likewise. (snan_value): Likewise. (max_value): Likewise. (min_value): Likewise. (min_subnorm_value): Likewise. (snan_value_ld): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (struct test_f_f_data): Likewise. (struct test_ff_f_data): Likewise. (struct test_fj_f_data): Likewise. (struct test_fi_f_data): Likewise. (struct test_fl_f_data): Likewise. (struct test_if_f_data): Likewise. (struct test_fff_f_data): Likewise. (struct test_fiu_M_data): Likewise. (struct test_fiu_U_data): Likewise. (struct test_c_f_data): Likewise. (struct test_f_f1_data): Likewise. (struct test_fF_f1_data): Likewise. (struct test_ffI_f1_data): Likewise. (struct test_c_c_data): Likewise. (struct test_cc_c_data): Likewise. (struct test_f_i_data): Likewise. (struct test_ff_i_data): Likewise. (struct test_f_l_data): Likewise. (struct test_f_L_data): Likewise. (struct test_fFF_11_data): Likewise. (struct test_Ff_b1_data): Likewise. (IF_ROUND_INIT_): Likewise. (IF_ROUND_INIT_FE_DOWNWARD): Likewise. (IF_ROUND_INIT_FE_TONEAREST): Likewise. (IF_ROUND_INIT_FE_TOWARDZERO): Likewise. (IF_ROUND_INIT_FE_UPWARD): Likewise. (ROUND_RESTORE_): Likewise. (ROUND_RESTORE_FE_DOWNWARD): Likewise. (ROUND_RESTORE_FE_TONEAREST): Likewise. (ROUND_RESTORE_FE_TOWARDZERO): Likewise. (ROUND_RESTORE_FE_UPWARD): Likewise. (RM_): Likewise. (RM_FE_DOWNWARD): Likewise. (RM_FE_TONEAREST): Likewise. (RM_FE_TOWARDZERO): Likewise. (RM_FE_UPWARD): Likewise. (COMMON_TEST_SETUP): Likewise. (EXTRA_OUTPUT_TEST_SETUP): Likewise. (COMMON_TEST_CLEANUP): Likewise. (EXTRA_OUTPUT_TEST_CLEANUP): Likewise. (RUN_TEST_f_f): Likewise. (RUN_TEST_LOOP_f_f): Likewise. (RUN_TEST_fp_f): Likewise. (RUN_TEST_LOOP_fp_f): Likewise. (RUN_TEST_2_f): Likewise. (RUN_TEST_LOOP_2_f): Likewise. (RUN_TEST_ff_f): Likewise. (RUN_TEST_LOOP_ff_f): Likewise. (RUN_TEST_LOOP_fj_f): Likewise. (RUN_TEST_fi_f): Likewise. (RUN_TEST_LOOP_fi_f): Likewise. (RUN_TEST_fl_f): Likewise. (RUN_TEST_LOOP_fl_f): Likewise. (RUN_TEST_if_f): Likewise. (RUN_TEST_LOOP_if_f): Likewise. (RUN_TEST_fff_f): Likewise. (RUN_TEST_LOOP_fff_f): Likewise. (RUN_TEST_fiu_M): Likewise. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (RUN_TEST_c_f): Likewise. (RUN_TEST_LOOP_c_f): Likewise. (RUN_TEST_f_f1): Likewise. (RUN_TEST_LOOP_f_f1): Likewise. (RUN_TEST_fF_f1): Likewise. (RUN_TEST_LOOP_fF_f1): Likewise. (RUN_TEST_fI_f1): Likewise. (RUN_TEST_LOOP_fI_f1): Likewise. (RUN_TEST_ffI_f1_mod8): Likewise. (RUN_TEST_LOOP_ffI_f1_mod8): Likewise. (RUN_TEST_Ff_b1): Likewise. (RUN_TEST_LOOP_Ff_b1): Likewise. (RUN_TEST_Ffp_b1): Likewise. (RUN_TEST_LOOP_Ffp_b1): Likewise. (RUN_TEST_c_c): Likewise. (RUN_TEST_LOOP_c_c): Likewise. (RUN_TEST_cc_c): Likewise. (RUN_TEST_LOOP_cc_c): Likewise. (RUN_TEST_f_i): Likewise. (RUN_TEST_LOOP_f_i): Likewise. (RUN_TEST_f_i_tg): Likewise. (RUN_TEST_LOOP_f_i_tg): Likewise. (RUN_TEST_ff_b): Likewise. (RUN_TEST_LOOP_ff_b): Likewise. (RUN_TEST_ff_i_tg): Likewise. (RUN_TEST_LOOP_ff_i_tg): Likewise. (RUN_TEST_f_b): Likewise. (RUN_TEST_LOOP_f_b): Likewise. (RUN_TEST_f_b_tg): Likewise. (RUN_TEST_LOOP_f_b_tg): Likewise. (RUN_TEST_f_l): Likewise. (RUN_TEST_LOOP_f_l): Likewise. (RUN_TEST_f_L): Likewise. (RUN_TEST_LOOP_f_L): Likewise. (RUN_TEST_fFF_11): Likewise. (RUN_TEST_LOOP_fFF_11): Likewise. (VEC_SUFF): Likewise. (STR_CONCAT): Likewise. (STR_CON3): Likewise. (HAVE_VECTOR): Likewise. (START): Likewise. (END): Likewise. (END_COMPLEX): Likewise. (ALL_RM_TEST): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Likewise. (parse_opt): Likewise. (argp): Likewise. (check_ulp): Likewise. (main): Likewise. (do_test): New function. Call tests of individual functions previously called from main.
2017-02-07 02:12:16 +08:00
&& fesetround (FE_UPWARD) == 0)
#define ROUND_RESTORE_ /* Empty. */
#define ROUND_RESTORE_FE_DOWNWARD \
fesetround (save_round_mode)
#define ROUND_RESTORE_FE_TONEAREST \
fesetround (save_round_mode)
#define ROUND_RESTORE_FE_TOWARDZERO \
fesetround (save_round_mode)
#define ROUND_RESTORE_FE_UPWARD \
fesetround (save_round_mode)
/* Field name to use for a given rounding mode. */
#define RM_ rn
#define RM_FE_DOWNWARD rd
#define RM_FE_TONEAREST rn
#define RM_FE_TOWARDZERO rz
#define RM_FE_UPWARD ru
/* Common setup for an individual test. */
#define COMMON_TEST_SETUP(ARG_STR) \
char *test_name; \
if (asprintf (&test_name, "%s (%s)", this_func, (ARG_STR)) == -1) \
abort ()
/* Setup for a test with an extra output. */
#define EXTRA_OUTPUT_TEST_SETUP(ARG_STR, N) \
char *extra##N##_name; \
if (asprintf (&extra##N##_name, "%s (%s) extra output " #N, \
this_func, (ARG_STR)) == -1) \
abort ()
/* Common cleanup after an individual test. */
#define COMMON_TEST_CLEANUP \
free (test_name)
/* Cleanup for a test with an extra output. */
#define EXTRA_OUTPUT_TEST_CLEANUP(N) \
free (extra##N##_name)
/* Run an individual test, including any required setup and checking
of results, or loop over all tests in an array. */
Add narrowing square root functions This patch adds the narrowing square root functions from TS 18661-1 / TS 18661-3 / C2X to glibc's libm: fsqrt, fsqrtl, dsqrtl, f32sqrtf64, f32sqrtf32x, f32xsqrtf64 for all configurations; f32sqrtf64x, f32sqrtf128, f64sqrtf64x, f64sqrtf128, f32xsqrtf64x, f32xsqrtf128, f64xsqrtf128 for configurations with _Float64x and _Float128; __f32sqrtieee128 and __f64sqrtieee128 aliases in the powerpc64le case (for calls to fsqrtl and dsqrtl when long double is IEEE binary128). Corresponding tgmath.h macro support is also added. The changes are mostly similar to those for the other narrowing functions previously added, so the description of those generally applies to this patch as well. However, the not-actually-narrowing cases (where the two types involved in the function have the same floating-point format) are aliased to sqrt, sqrtl or sqrtf128 rather than needing a separately built not-actually-narrowing function such as was needed for add / sub / mul / div. Thus, there is no __nldbl_dsqrtl name for ldbl-opt because no such name was needed (whereas the other functions needed such a name since the only other name for that entry point was e.g. f32xaddf64, not reserved by TS 18661-1); the headers are made to arrange for sqrt to be called in that case instead. The DIAG_* calls in sysdeps/ieee754/soft-fp/s_dsqrtl.c are because they were observed to be needed in GCC 7 testing of riscv32-linux-gnu-rv32imac-ilp32. The other sysdeps/ieee754/soft-fp/ files added didn't need such DIAG_* in any configuration I tested with build-many-glibcs.py, but if they do turn out to be needed in more files with some other configuration / GCC version, they can always be added there. I reused the same test inputs in auto-libm-test-in as for non-narrowing sqrt rather than adding extra or separate inputs for narrowing sqrt. The tests in libm-test-narrow-sqrt.inc also follow those for non-narrowing sqrt. Tested as followed: natively with the full glibc testsuite for x86_64 (GCC 11, 7, 6) and x86 (GCC 11); with build-many-glibcs.py with GCC 11, 7 and 6; cross testing of math/ tests for powerpc64le, powerpc32 hard float, mips64 (all three ABIs, both hard and soft float). The different GCC versions are to cover the different cases in tgmath.h and tgmath.h tests properly (GCC 6 has _Float* only as typedefs in glibc headers, GCC 7 has proper _Float* support, GCC 8 adds __builtin_tgmath).
2021-09-11 04:56:22 +08:00
#define RUN_TEST_1_f(ARG_STR, FUNC_NAME, ARG, EXPECTED, \
Move non-function-specific parts of libm-test.inc to separate file. libm-test.inc contains both test infrastructure and tests of individual functions. This patch moves the infrastructure to a separate file libm-test-driver.c. This is in preparation for splitting the tests of individual functions into separate source files, which will be processed individually by gen-libm-test.pl (so e.g. libm-test-acos.inc and auto-libm-test-out-acos will be processed by gen-libm-test.pl to produce libm-test-acos.c, and files such as test-double-acos.c will be generated by the Makefile to include appropriate headers, libm-test-driver.c and libm-test-acos.c so tests of each function get run separately). It is no doubt possible to split things up further, so that functions not depending on the type being tested only get compiled once and most of those depending on the type being tested get compiled once per type (rather than separately for variants such as inline / no-inline, and separately for each function being tested after that split), but this rearrangement as-is seems a useful incremental step towards splitting these tests by function. * math/libm-test-driver.c: New file. Based on math/libm-test.inc. * math/libm-test.inc: Move all contents, other than tests of individual functions, to libm-test-driver.c. [!FE_TONEAREST] (FE_TONEAREST): Move to libm-test-driver.c. [!FE_TOWARDZERO] (FE_TOWARDZERO): Likewise. [!FE_UPWARD] (FE_UPWARD): Likewise. [!FE_DOWNWARD] (FE_DOWNWARD): Likewise. (NO_EXCEPTION): Likewise. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ULP_IDX): Likewise. (QTYPE_STR): Likewise. (TEST_COND_binary32): Likewise. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (lit_pi_3_m_4_d): Likewise. (lit_pi_3_m_4_ln10_m_d): Likewise. (lit_pi_2_ln10_m_d): Likewise. (lit_pi_4_ln10_m_d): Likewise. (lit_pi_ln10_d): Likewise. (lit_pi_2_d): Likewise. (lit_pi_4_d): Likewise. (lit_pi): Likewise. (lit_e): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (plus_zero): Likewise. (minus_zero): Likewise. (plus_infty): Likewise. (minus_infty): Likewise. (qnan_value_pl): Likewise. (qnan_value): Likewise. (snan_value_pl): Likewise. (snan_value): Likewise. (max_value): Likewise. (min_value): Likewise. (min_subnorm_value): Likewise. (snan_value_ld): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (struct test_f_f_data): Likewise. (struct test_ff_f_data): Likewise. (struct test_fj_f_data): Likewise. (struct test_fi_f_data): Likewise. (struct test_fl_f_data): Likewise. (struct test_if_f_data): Likewise. (struct test_fff_f_data): Likewise. (struct test_fiu_M_data): Likewise. (struct test_fiu_U_data): Likewise. (struct test_c_f_data): Likewise. (struct test_f_f1_data): Likewise. (struct test_fF_f1_data): Likewise. (struct test_ffI_f1_data): Likewise. (struct test_c_c_data): Likewise. (struct test_cc_c_data): Likewise. (struct test_f_i_data): Likewise. (struct test_ff_i_data): Likewise. (struct test_f_l_data): Likewise. (struct test_f_L_data): Likewise. (struct test_fFF_11_data): Likewise. (struct test_Ff_b1_data): Likewise. (IF_ROUND_INIT_): Likewise. (IF_ROUND_INIT_FE_DOWNWARD): Likewise. (IF_ROUND_INIT_FE_TONEAREST): Likewise. (IF_ROUND_INIT_FE_TOWARDZERO): Likewise. (IF_ROUND_INIT_FE_UPWARD): Likewise. (ROUND_RESTORE_): Likewise. (ROUND_RESTORE_FE_DOWNWARD): Likewise. (ROUND_RESTORE_FE_TONEAREST): Likewise. (ROUND_RESTORE_FE_TOWARDZERO): Likewise. (ROUND_RESTORE_FE_UPWARD): Likewise. (RM_): Likewise. (RM_FE_DOWNWARD): Likewise. (RM_FE_TONEAREST): Likewise. (RM_FE_TOWARDZERO): Likewise. (RM_FE_UPWARD): Likewise. (COMMON_TEST_SETUP): Likewise. (EXTRA_OUTPUT_TEST_SETUP): Likewise. (COMMON_TEST_CLEANUP): Likewise. (EXTRA_OUTPUT_TEST_CLEANUP): Likewise. (RUN_TEST_f_f): Likewise. (RUN_TEST_LOOP_f_f): Likewise. (RUN_TEST_fp_f): Likewise. (RUN_TEST_LOOP_fp_f): Likewise. (RUN_TEST_2_f): Likewise. (RUN_TEST_LOOP_2_f): Likewise. (RUN_TEST_ff_f): Likewise. (RUN_TEST_LOOP_ff_f): Likewise. (RUN_TEST_LOOP_fj_f): Likewise. (RUN_TEST_fi_f): Likewise. (RUN_TEST_LOOP_fi_f): Likewise. (RUN_TEST_fl_f): Likewise. (RUN_TEST_LOOP_fl_f): Likewise. (RUN_TEST_if_f): Likewise. (RUN_TEST_LOOP_if_f): Likewise. (RUN_TEST_fff_f): Likewise. (RUN_TEST_LOOP_fff_f): Likewise. (RUN_TEST_fiu_M): Likewise. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (RUN_TEST_c_f): Likewise. (RUN_TEST_LOOP_c_f): Likewise. (RUN_TEST_f_f1): Likewise. (RUN_TEST_LOOP_f_f1): Likewise. (RUN_TEST_fF_f1): Likewise. (RUN_TEST_LOOP_fF_f1): Likewise. (RUN_TEST_fI_f1): Likewise. (RUN_TEST_LOOP_fI_f1): Likewise. (RUN_TEST_ffI_f1_mod8): Likewise. (RUN_TEST_LOOP_ffI_f1_mod8): Likewise. (RUN_TEST_Ff_b1): Likewise. (RUN_TEST_LOOP_Ff_b1): Likewise. (RUN_TEST_Ffp_b1): Likewise. (RUN_TEST_LOOP_Ffp_b1): Likewise. (RUN_TEST_c_c): Likewise. (RUN_TEST_LOOP_c_c): Likewise. (RUN_TEST_cc_c): Likewise. (RUN_TEST_LOOP_cc_c): Likewise. (RUN_TEST_f_i): Likewise. (RUN_TEST_LOOP_f_i): Likewise. (RUN_TEST_f_i_tg): Likewise. (RUN_TEST_LOOP_f_i_tg): Likewise. (RUN_TEST_ff_b): Likewise. (RUN_TEST_LOOP_ff_b): Likewise. (RUN_TEST_ff_i_tg): Likewise. (RUN_TEST_LOOP_ff_i_tg): Likewise. (RUN_TEST_f_b): Likewise. (RUN_TEST_LOOP_f_b): Likewise. (RUN_TEST_f_b_tg): Likewise. (RUN_TEST_LOOP_f_b_tg): Likewise. (RUN_TEST_f_l): Likewise. (RUN_TEST_LOOP_f_l): Likewise. (RUN_TEST_f_L): Likewise. (RUN_TEST_LOOP_f_L): Likewise. (RUN_TEST_fFF_11): Likewise. (RUN_TEST_LOOP_fFF_11): Likewise. (VEC_SUFF): Likewise. (STR_CONCAT): Likewise. (STR_CON3): Likewise. (HAVE_VECTOR): Likewise. (START): Likewise. (END): Likewise. (END_COMPLEX): Likewise. (ALL_RM_TEST): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Likewise. (parse_opt): Likewise. (argp): Likewise. (check_ulp): Likewise. (main): Likewise. (do_test): New function. Call tests of individual functions previously called from main.
2017-02-07 02:12:16 +08:00
EXCEPTIONS) \
do \
if (enable_test (EXCEPTIONS)) \
{ \
COMMON_TEST_SETUP (ARG_STR); \
check_float (test_name, FUNC_TEST (FUNC_NAME) (ARG), \
EXPECTED, EXCEPTIONS); \
COMMON_TEST_CLEANUP; \
} \
while (0)
Add narrowing square root functions This patch adds the narrowing square root functions from TS 18661-1 / TS 18661-3 / C2X to glibc's libm: fsqrt, fsqrtl, dsqrtl, f32sqrtf64, f32sqrtf32x, f32xsqrtf64 for all configurations; f32sqrtf64x, f32sqrtf128, f64sqrtf64x, f64sqrtf128, f32xsqrtf64x, f32xsqrtf128, f64xsqrtf128 for configurations with _Float64x and _Float128; __f32sqrtieee128 and __f64sqrtieee128 aliases in the powerpc64le case (for calls to fsqrtl and dsqrtl when long double is IEEE binary128). Corresponding tgmath.h macro support is also added. The changes are mostly similar to those for the other narrowing functions previously added, so the description of those generally applies to this patch as well. However, the not-actually-narrowing cases (where the two types involved in the function have the same floating-point format) are aliased to sqrt, sqrtl or sqrtf128 rather than needing a separately built not-actually-narrowing function such as was needed for add / sub / mul / div. Thus, there is no __nldbl_dsqrtl name for ldbl-opt because no such name was needed (whereas the other functions needed such a name since the only other name for that entry point was e.g. f32xaddf64, not reserved by TS 18661-1); the headers are made to arrange for sqrt to be called in that case instead. The DIAG_* calls in sysdeps/ieee754/soft-fp/s_dsqrtl.c are because they were observed to be needed in GCC 7 testing of riscv32-linux-gnu-rv32imac-ilp32. The other sysdeps/ieee754/soft-fp/ files added didn't need such DIAG_* in any configuration I tested with build-many-glibcs.py, but if they do turn out to be needed in more files with some other configuration / GCC version, they can always be added there. I reused the same test inputs in auto-libm-test-in as for non-narrowing sqrt rather than adding extra or separate inputs for narrowing sqrt. The tests in libm-test-narrow-sqrt.inc also follow those for non-narrowing sqrt. Tested as followed: natively with the full glibc testsuite for x86_64 (GCC 11, 7, 6) and x86 (GCC 11); with build-many-glibcs.py with GCC 11, 7 and 6; cross testing of math/ tests for powerpc64le, powerpc32 hard float, mips64 (all three ABIs, both hard and soft float). The different GCC versions are to cover the different cases in tgmath.h and tgmath.h tests properly (GCC 6 has _Float* only as typedefs in glibc headers, GCC 7 has proper _Float* support, GCC 8 adds __builtin_tgmath).
2021-09-11 04:56:22 +08:00
#define RUN_TEST_LOOP_1_f(FUNC_NAME, ARRAY, ROUNDING_MODE) \
Move non-function-specific parts of libm-test.inc to separate file. libm-test.inc contains both test infrastructure and tests of individual functions. This patch moves the infrastructure to a separate file libm-test-driver.c. This is in preparation for splitting the tests of individual functions into separate source files, which will be processed individually by gen-libm-test.pl (so e.g. libm-test-acos.inc and auto-libm-test-out-acos will be processed by gen-libm-test.pl to produce libm-test-acos.c, and files such as test-double-acos.c will be generated by the Makefile to include appropriate headers, libm-test-driver.c and libm-test-acos.c so tests of each function get run separately). It is no doubt possible to split things up further, so that functions not depending on the type being tested only get compiled once and most of those depending on the type being tested get compiled once per type (rather than separately for variants such as inline / no-inline, and separately for each function being tested after that split), but this rearrangement as-is seems a useful incremental step towards splitting these tests by function. * math/libm-test-driver.c: New file. Based on math/libm-test.inc. * math/libm-test.inc: Move all contents, other than tests of individual functions, to libm-test-driver.c. [!FE_TONEAREST] (FE_TONEAREST): Move to libm-test-driver.c. [!FE_TOWARDZERO] (FE_TOWARDZERO): Likewise. [!FE_UPWARD] (FE_UPWARD): Likewise. [!FE_DOWNWARD] (FE_DOWNWARD): Likewise. (NO_EXCEPTION): Likewise. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ULP_IDX): Likewise. (QTYPE_STR): Likewise. (TEST_COND_binary32): Likewise. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (lit_pi_3_m_4_d): Likewise. (lit_pi_3_m_4_ln10_m_d): Likewise. (lit_pi_2_ln10_m_d): Likewise. (lit_pi_4_ln10_m_d): Likewise. (lit_pi_ln10_d): Likewise. (lit_pi_2_d): Likewise. (lit_pi_4_d): Likewise. (lit_pi): Likewise. (lit_e): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (plus_zero): Likewise. (minus_zero): Likewise. (plus_infty): Likewise. (minus_infty): Likewise. (qnan_value_pl): Likewise. (qnan_value): Likewise. (snan_value_pl): Likewise. (snan_value): Likewise. (max_value): Likewise. (min_value): Likewise. (min_subnorm_value): Likewise. (snan_value_ld): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (struct test_f_f_data): Likewise. (struct test_ff_f_data): Likewise. (struct test_fj_f_data): Likewise. (struct test_fi_f_data): Likewise. (struct test_fl_f_data): Likewise. (struct test_if_f_data): Likewise. (struct test_fff_f_data): Likewise. (struct test_fiu_M_data): Likewise. (struct test_fiu_U_data): Likewise. (struct test_c_f_data): Likewise. (struct test_f_f1_data): Likewise. (struct test_fF_f1_data): Likewise. (struct test_ffI_f1_data): Likewise. (struct test_c_c_data): Likewise. (struct test_cc_c_data): Likewise. (struct test_f_i_data): Likewise. (struct test_ff_i_data): Likewise. (struct test_f_l_data): Likewise. (struct test_f_L_data): Likewise. (struct test_fFF_11_data): Likewise. (struct test_Ff_b1_data): Likewise. (IF_ROUND_INIT_): Likewise. (IF_ROUND_INIT_FE_DOWNWARD): Likewise. (IF_ROUND_INIT_FE_TONEAREST): Likewise. (IF_ROUND_INIT_FE_TOWARDZERO): Likewise. (IF_ROUND_INIT_FE_UPWARD): Likewise. (ROUND_RESTORE_): Likewise. (ROUND_RESTORE_FE_DOWNWARD): Likewise. (ROUND_RESTORE_FE_TONEAREST): Likewise. (ROUND_RESTORE_FE_TOWARDZERO): Likewise. (ROUND_RESTORE_FE_UPWARD): Likewise. (RM_): Likewise. (RM_FE_DOWNWARD): Likewise. (RM_FE_TONEAREST): Likewise. (RM_FE_TOWARDZERO): Likewise. (RM_FE_UPWARD): Likewise. (COMMON_TEST_SETUP): Likewise. (EXTRA_OUTPUT_TEST_SETUP): Likewise. (COMMON_TEST_CLEANUP): Likewise. (EXTRA_OUTPUT_TEST_CLEANUP): Likewise. (RUN_TEST_f_f): Likewise. (RUN_TEST_LOOP_f_f): Likewise. (RUN_TEST_fp_f): Likewise. (RUN_TEST_LOOP_fp_f): Likewise. (RUN_TEST_2_f): Likewise. (RUN_TEST_LOOP_2_f): Likewise. (RUN_TEST_ff_f): Likewise. (RUN_TEST_LOOP_ff_f): Likewise. (RUN_TEST_LOOP_fj_f): Likewise. (RUN_TEST_fi_f): Likewise. (RUN_TEST_LOOP_fi_f): Likewise. (RUN_TEST_fl_f): Likewise. (RUN_TEST_LOOP_fl_f): Likewise. (RUN_TEST_if_f): Likewise. (RUN_TEST_LOOP_if_f): Likewise. (RUN_TEST_fff_f): Likewise. (RUN_TEST_LOOP_fff_f): Likewise. (RUN_TEST_fiu_M): Likewise. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (RUN_TEST_c_f): Likewise. (RUN_TEST_LOOP_c_f): Likewise. (RUN_TEST_f_f1): Likewise. (RUN_TEST_LOOP_f_f1): Likewise. (RUN_TEST_fF_f1): Likewise. (RUN_TEST_LOOP_fF_f1): Likewise. (RUN_TEST_fI_f1): Likewise. (RUN_TEST_LOOP_fI_f1): Likewise. (RUN_TEST_ffI_f1_mod8): Likewise. (RUN_TEST_LOOP_ffI_f1_mod8): Likewise. (RUN_TEST_Ff_b1): Likewise. (RUN_TEST_LOOP_Ff_b1): Likewise. (RUN_TEST_Ffp_b1): Likewise. (RUN_TEST_LOOP_Ffp_b1): Likewise. (RUN_TEST_c_c): Likewise. (RUN_TEST_LOOP_c_c): Likewise. (RUN_TEST_cc_c): Likewise. (RUN_TEST_LOOP_cc_c): Likewise. (RUN_TEST_f_i): Likewise. (RUN_TEST_LOOP_f_i): Likewise. (RUN_TEST_f_i_tg): Likewise. (RUN_TEST_LOOP_f_i_tg): Likewise. (RUN_TEST_ff_b): Likewise. (RUN_TEST_LOOP_ff_b): Likewise. (RUN_TEST_ff_i_tg): Likewise. (RUN_TEST_LOOP_ff_i_tg): Likewise. (RUN_TEST_f_b): Likewise. (RUN_TEST_LOOP_f_b): Likewise. (RUN_TEST_f_b_tg): Likewise. (RUN_TEST_LOOP_f_b_tg): Likewise. (RUN_TEST_f_l): Likewise. (RUN_TEST_LOOP_f_l): Likewise. (RUN_TEST_f_L): Likewise. (RUN_TEST_LOOP_f_L): Likewise. (RUN_TEST_fFF_11): Likewise. (RUN_TEST_LOOP_fFF_11): Likewise. (VEC_SUFF): Likewise. (STR_CONCAT): Likewise. (STR_CON3): Likewise. (HAVE_VECTOR): Likewise. (START): Likewise. (END): Likewise. (END_COMPLEX): Likewise. (ALL_RM_TEST): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Likewise. (parse_opt): Likewise. (argp): Likewise. (check_ulp): Likewise. (main): Likewise. (do_test): New function. Call tests of individual functions previously called from main.
2017-02-07 02:12:16 +08:00
IF_ROUND_INIT_ ## ROUNDING_MODE \
for (size_t i = 0; i < sizeof (ARRAY) / sizeof (ARRAY)[0]; i++) \
Add narrowing square root functions This patch adds the narrowing square root functions from TS 18661-1 / TS 18661-3 / C2X to glibc's libm: fsqrt, fsqrtl, dsqrtl, f32sqrtf64, f32sqrtf32x, f32xsqrtf64 for all configurations; f32sqrtf64x, f32sqrtf128, f64sqrtf64x, f64sqrtf128, f32xsqrtf64x, f32xsqrtf128, f64xsqrtf128 for configurations with _Float64x and _Float128; __f32sqrtieee128 and __f64sqrtieee128 aliases in the powerpc64le case (for calls to fsqrtl and dsqrtl when long double is IEEE binary128). Corresponding tgmath.h macro support is also added. The changes are mostly similar to those for the other narrowing functions previously added, so the description of those generally applies to this patch as well. However, the not-actually-narrowing cases (where the two types involved in the function have the same floating-point format) are aliased to sqrt, sqrtl or sqrtf128 rather than needing a separately built not-actually-narrowing function such as was needed for add / sub / mul / div. Thus, there is no __nldbl_dsqrtl name for ldbl-opt because no such name was needed (whereas the other functions needed such a name since the only other name for that entry point was e.g. f32xaddf64, not reserved by TS 18661-1); the headers are made to arrange for sqrt to be called in that case instead. The DIAG_* calls in sysdeps/ieee754/soft-fp/s_dsqrtl.c are because they were observed to be needed in GCC 7 testing of riscv32-linux-gnu-rv32imac-ilp32. The other sysdeps/ieee754/soft-fp/ files added didn't need such DIAG_* in any configuration I tested with build-many-glibcs.py, but if they do turn out to be needed in more files with some other configuration / GCC version, they can always be added there. I reused the same test inputs in auto-libm-test-in as for non-narrowing sqrt rather than adding extra or separate inputs for narrowing sqrt. The tests in libm-test-narrow-sqrt.inc also follow those for non-narrowing sqrt. Tested as followed: natively with the full glibc testsuite for x86_64 (GCC 11, 7, 6) and x86 (GCC 11); with build-many-glibcs.py with GCC 11, 7 and 6; cross testing of math/ tests for powerpc64le, powerpc32 hard float, mips64 (all three ABIs, both hard and soft float). The different GCC versions are to cover the different cases in tgmath.h and tgmath.h tests properly (GCC 6 has _Float* only as typedefs in glibc headers, GCC 7 has proper _Float* support, GCC 8 adds __builtin_tgmath).
2021-09-11 04:56:22 +08:00
RUN_TEST_1_f ((ARRAY)[i].arg_str, FUNC_NAME, (ARRAY)[i].arg, \
Move non-function-specific parts of libm-test.inc to separate file. libm-test.inc contains both test infrastructure and tests of individual functions. This patch moves the infrastructure to a separate file libm-test-driver.c. This is in preparation for splitting the tests of individual functions into separate source files, which will be processed individually by gen-libm-test.pl (so e.g. libm-test-acos.inc and auto-libm-test-out-acos will be processed by gen-libm-test.pl to produce libm-test-acos.c, and files such as test-double-acos.c will be generated by the Makefile to include appropriate headers, libm-test-driver.c and libm-test-acos.c so tests of each function get run separately). It is no doubt possible to split things up further, so that functions not depending on the type being tested only get compiled once and most of those depending on the type being tested get compiled once per type (rather than separately for variants such as inline / no-inline, and separately for each function being tested after that split), but this rearrangement as-is seems a useful incremental step towards splitting these tests by function. * math/libm-test-driver.c: New file. Based on math/libm-test.inc. * math/libm-test.inc: Move all contents, other than tests of individual functions, to libm-test-driver.c. [!FE_TONEAREST] (FE_TONEAREST): Move to libm-test-driver.c. [!FE_TOWARDZERO] (FE_TOWARDZERO): Likewise. [!FE_UPWARD] (FE_UPWARD): Likewise. [!FE_DOWNWARD] (FE_DOWNWARD): Likewise. (NO_EXCEPTION): Likewise. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ULP_IDX): Likewise. (QTYPE_STR): Likewise. (TEST_COND_binary32): Likewise. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (lit_pi_3_m_4_d): Likewise. (lit_pi_3_m_4_ln10_m_d): Likewise. (lit_pi_2_ln10_m_d): Likewise. (lit_pi_4_ln10_m_d): Likewise. (lit_pi_ln10_d): Likewise. (lit_pi_2_d): Likewise. (lit_pi_4_d): Likewise. (lit_pi): Likewise. (lit_e): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (plus_zero): Likewise. (minus_zero): Likewise. (plus_infty): Likewise. (minus_infty): Likewise. (qnan_value_pl): Likewise. (qnan_value): Likewise. (snan_value_pl): Likewise. (snan_value): Likewise. (max_value): Likewise. (min_value): Likewise. (min_subnorm_value): Likewise. (snan_value_ld): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (struct test_f_f_data): Likewise. (struct test_ff_f_data): Likewise. (struct test_fj_f_data): Likewise. (struct test_fi_f_data): Likewise. (struct test_fl_f_data): Likewise. (struct test_if_f_data): Likewise. (struct test_fff_f_data): Likewise. (struct test_fiu_M_data): Likewise. (struct test_fiu_U_data): Likewise. (struct test_c_f_data): Likewise. (struct test_f_f1_data): Likewise. (struct test_fF_f1_data): Likewise. (struct test_ffI_f1_data): Likewise. (struct test_c_c_data): Likewise. (struct test_cc_c_data): Likewise. (struct test_f_i_data): Likewise. (struct test_ff_i_data): Likewise. (struct test_f_l_data): Likewise. (struct test_f_L_data): Likewise. (struct test_fFF_11_data): Likewise. (struct test_Ff_b1_data): Likewise. (IF_ROUND_INIT_): Likewise. (IF_ROUND_INIT_FE_DOWNWARD): Likewise. (IF_ROUND_INIT_FE_TONEAREST): Likewise. (IF_ROUND_INIT_FE_TOWARDZERO): Likewise. (IF_ROUND_INIT_FE_UPWARD): Likewise. (ROUND_RESTORE_): Likewise. (ROUND_RESTORE_FE_DOWNWARD): Likewise. (ROUND_RESTORE_FE_TONEAREST): Likewise. (ROUND_RESTORE_FE_TOWARDZERO): Likewise. (ROUND_RESTORE_FE_UPWARD): Likewise. (RM_): Likewise. (RM_FE_DOWNWARD): Likewise. (RM_FE_TONEAREST): Likewise. (RM_FE_TOWARDZERO): Likewise. (RM_FE_UPWARD): Likewise. (COMMON_TEST_SETUP): Likewise. (EXTRA_OUTPUT_TEST_SETUP): Likewise. (COMMON_TEST_CLEANUP): Likewise. (EXTRA_OUTPUT_TEST_CLEANUP): Likewise. (RUN_TEST_f_f): Likewise. (RUN_TEST_LOOP_f_f): Likewise. (RUN_TEST_fp_f): Likewise. (RUN_TEST_LOOP_fp_f): Likewise. (RUN_TEST_2_f): Likewise. (RUN_TEST_LOOP_2_f): Likewise. (RUN_TEST_ff_f): Likewise. (RUN_TEST_LOOP_ff_f): Likewise. (RUN_TEST_LOOP_fj_f): Likewise. (RUN_TEST_fi_f): Likewise. (RUN_TEST_LOOP_fi_f): Likewise. (RUN_TEST_fl_f): Likewise. (RUN_TEST_LOOP_fl_f): Likewise. (RUN_TEST_if_f): Likewise. (RUN_TEST_LOOP_if_f): Likewise. (RUN_TEST_fff_f): Likewise. (RUN_TEST_LOOP_fff_f): Likewise. (RUN_TEST_fiu_M): Likewise. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (RUN_TEST_c_f): Likewise. (RUN_TEST_LOOP_c_f): Likewise. (RUN_TEST_f_f1): Likewise. (RUN_TEST_LOOP_f_f1): Likewise. (RUN_TEST_fF_f1): Likewise. (RUN_TEST_LOOP_fF_f1): Likewise. (RUN_TEST_fI_f1): Likewise. (RUN_TEST_LOOP_fI_f1): Likewise. (RUN_TEST_ffI_f1_mod8): Likewise. (RUN_TEST_LOOP_ffI_f1_mod8): Likewise. (RUN_TEST_Ff_b1): Likewise. (RUN_TEST_LOOP_Ff_b1): Likewise. (RUN_TEST_Ffp_b1): Likewise. (RUN_TEST_LOOP_Ffp_b1): Likewise. (RUN_TEST_c_c): Likewise. (RUN_TEST_LOOP_c_c): Likewise. (RUN_TEST_cc_c): Likewise. (RUN_TEST_LOOP_cc_c): Likewise. (RUN_TEST_f_i): Likewise. (RUN_TEST_LOOP_f_i): Likewise. (RUN_TEST_f_i_tg): Likewise. (RUN_TEST_LOOP_f_i_tg): Likewise. (RUN_TEST_ff_b): Likewise. (RUN_TEST_LOOP_ff_b): Likewise. (RUN_TEST_ff_i_tg): Likewise. (RUN_TEST_LOOP_ff_i_tg): Likewise. (RUN_TEST_f_b): Likewise. (RUN_TEST_LOOP_f_b): Likewise. (RUN_TEST_f_b_tg): Likewise. (RUN_TEST_LOOP_f_b_tg): Likewise. (RUN_TEST_f_l): Likewise. (RUN_TEST_LOOP_f_l): Likewise. (RUN_TEST_f_L): Likewise. (RUN_TEST_LOOP_f_L): Likewise. (RUN_TEST_fFF_11): Likewise. (RUN_TEST_LOOP_fFF_11): Likewise. (VEC_SUFF): Likewise. (STR_CONCAT): Likewise. (STR_CON3): Likewise. (HAVE_VECTOR): Likewise. (START): Likewise. (END): Likewise. (END_COMPLEX): Likewise. (ALL_RM_TEST): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Likewise. (parse_opt): Likewise. (argp): Likewise. (check_ulp): Likewise. (main): Likewise. (do_test): New function. Call tests of individual functions previously called from main.
2017-02-07 02:12:16 +08:00
(ARRAY)[i].RM_##ROUNDING_MODE.expected, \
(ARRAY)[i].RM_##ROUNDING_MODE.exceptions); \
ROUND_RESTORE_ ## ROUNDING_MODE
Add narrowing square root functions This patch adds the narrowing square root functions from TS 18661-1 / TS 18661-3 / C2X to glibc's libm: fsqrt, fsqrtl, dsqrtl, f32sqrtf64, f32sqrtf32x, f32xsqrtf64 for all configurations; f32sqrtf64x, f32sqrtf128, f64sqrtf64x, f64sqrtf128, f32xsqrtf64x, f32xsqrtf128, f64xsqrtf128 for configurations with _Float64x and _Float128; __f32sqrtieee128 and __f64sqrtieee128 aliases in the powerpc64le case (for calls to fsqrtl and dsqrtl when long double is IEEE binary128). Corresponding tgmath.h macro support is also added. The changes are mostly similar to those for the other narrowing functions previously added, so the description of those generally applies to this patch as well. However, the not-actually-narrowing cases (where the two types involved in the function have the same floating-point format) are aliased to sqrt, sqrtl or sqrtf128 rather than needing a separately built not-actually-narrowing function such as was needed for add / sub / mul / div. Thus, there is no __nldbl_dsqrtl name for ldbl-opt because no such name was needed (whereas the other functions needed such a name since the only other name for that entry point was e.g. f32xaddf64, not reserved by TS 18661-1); the headers are made to arrange for sqrt to be called in that case instead. The DIAG_* calls in sysdeps/ieee754/soft-fp/s_dsqrtl.c are because they were observed to be needed in GCC 7 testing of riscv32-linux-gnu-rv32imac-ilp32. The other sysdeps/ieee754/soft-fp/ files added didn't need such DIAG_* in any configuration I tested with build-many-glibcs.py, but if they do turn out to be needed in more files with some other configuration / GCC version, they can always be added there. I reused the same test inputs in auto-libm-test-in as for non-narrowing sqrt rather than adding extra or separate inputs for narrowing sqrt. The tests in libm-test-narrow-sqrt.inc also follow those for non-narrowing sqrt. Tested as followed: natively with the full glibc testsuite for x86_64 (GCC 11, 7, 6) and x86 (GCC 11); with build-many-glibcs.py with GCC 11, 7 and 6; cross testing of math/ tests for powerpc64le, powerpc32 hard float, mips64 (all three ABIs, both hard and soft float). The different GCC versions are to cover the different cases in tgmath.h and tgmath.h tests properly (GCC 6 has _Float* only as typedefs in glibc headers, GCC 7 has proper _Float* support, GCC 8 adds __builtin_tgmath).
2021-09-11 04:56:22 +08:00
#define RUN_TEST_LOOP_f_f RUN_TEST_LOOP_1_f
#define RUN_TEST_LOOP_a_f RUN_TEST_LOOP_1_f
Move non-function-specific parts of libm-test.inc to separate file. libm-test.inc contains both test infrastructure and tests of individual functions. This patch moves the infrastructure to a separate file libm-test-driver.c. This is in preparation for splitting the tests of individual functions into separate source files, which will be processed individually by gen-libm-test.pl (so e.g. libm-test-acos.inc and auto-libm-test-out-acos will be processed by gen-libm-test.pl to produce libm-test-acos.c, and files such as test-double-acos.c will be generated by the Makefile to include appropriate headers, libm-test-driver.c and libm-test-acos.c so tests of each function get run separately). It is no doubt possible to split things up further, so that functions not depending on the type being tested only get compiled once and most of those depending on the type being tested get compiled once per type (rather than separately for variants such as inline / no-inline, and separately for each function being tested after that split), but this rearrangement as-is seems a useful incremental step towards splitting these tests by function. * math/libm-test-driver.c: New file. Based on math/libm-test.inc. * math/libm-test.inc: Move all contents, other than tests of individual functions, to libm-test-driver.c. [!FE_TONEAREST] (FE_TONEAREST): Move to libm-test-driver.c. [!FE_TOWARDZERO] (FE_TOWARDZERO): Likewise. [!FE_UPWARD] (FE_UPWARD): Likewise. [!FE_DOWNWARD] (FE_DOWNWARD): Likewise. (NO_EXCEPTION): Likewise. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ULP_IDX): Likewise. (QTYPE_STR): Likewise. (TEST_COND_binary32): Likewise. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (lit_pi_3_m_4_d): Likewise. (lit_pi_3_m_4_ln10_m_d): Likewise. (lit_pi_2_ln10_m_d): Likewise. (lit_pi_4_ln10_m_d): Likewise. (lit_pi_ln10_d): Likewise. (lit_pi_2_d): Likewise. (lit_pi_4_d): Likewise. (lit_pi): Likewise. (lit_e): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (plus_zero): Likewise. (minus_zero): Likewise. (plus_infty): Likewise. (minus_infty): Likewise. (qnan_value_pl): Likewise. (qnan_value): Likewise. (snan_value_pl): Likewise. (snan_value): Likewise. (max_value): Likewise. (min_value): Likewise. (min_subnorm_value): Likewise. (snan_value_ld): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (struct test_f_f_data): Likewise. (struct test_ff_f_data): Likewise. (struct test_fj_f_data): Likewise. (struct test_fi_f_data): Likewise. (struct test_fl_f_data): Likewise. (struct test_if_f_data): Likewise. (struct test_fff_f_data): Likewise. (struct test_fiu_M_data): Likewise. (struct test_fiu_U_data): Likewise. (struct test_c_f_data): Likewise. (struct test_f_f1_data): Likewise. (struct test_fF_f1_data): Likewise. (struct test_ffI_f1_data): Likewise. (struct test_c_c_data): Likewise. (struct test_cc_c_data): Likewise. (struct test_f_i_data): Likewise. (struct test_ff_i_data): Likewise. (struct test_f_l_data): Likewise. (struct test_f_L_data): Likewise. (struct test_fFF_11_data): Likewise. (struct test_Ff_b1_data): Likewise. (IF_ROUND_INIT_): Likewise. (IF_ROUND_INIT_FE_DOWNWARD): Likewise. (IF_ROUND_INIT_FE_TONEAREST): Likewise. (IF_ROUND_INIT_FE_TOWARDZERO): Likewise. (IF_ROUND_INIT_FE_UPWARD): Likewise. (ROUND_RESTORE_): Likewise. (ROUND_RESTORE_FE_DOWNWARD): Likewise. (ROUND_RESTORE_FE_TONEAREST): Likewise. (ROUND_RESTORE_FE_TOWARDZERO): Likewise. (ROUND_RESTORE_FE_UPWARD): Likewise. (RM_): Likewise. (RM_FE_DOWNWARD): Likewise. (RM_FE_TONEAREST): Likewise. (RM_FE_TOWARDZERO): Likewise. (RM_FE_UPWARD): Likewise. (COMMON_TEST_SETUP): Likewise. (EXTRA_OUTPUT_TEST_SETUP): Likewise. (COMMON_TEST_CLEANUP): Likewise. (EXTRA_OUTPUT_TEST_CLEANUP): Likewise. (RUN_TEST_f_f): Likewise. (RUN_TEST_LOOP_f_f): Likewise. (RUN_TEST_fp_f): Likewise. (RUN_TEST_LOOP_fp_f): Likewise. (RUN_TEST_2_f): Likewise. (RUN_TEST_LOOP_2_f): Likewise. (RUN_TEST_ff_f): Likewise. (RUN_TEST_LOOP_ff_f): Likewise. (RUN_TEST_LOOP_fj_f): Likewise. (RUN_TEST_fi_f): Likewise. (RUN_TEST_LOOP_fi_f): Likewise. (RUN_TEST_fl_f): Likewise. (RUN_TEST_LOOP_fl_f): Likewise. (RUN_TEST_if_f): Likewise. (RUN_TEST_LOOP_if_f): Likewise. (RUN_TEST_fff_f): Likewise. (RUN_TEST_LOOP_fff_f): Likewise. (RUN_TEST_fiu_M): Likewise. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (RUN_TEST_c_f): Likewise. (RUN_TEST_LOOP_c_f): Likewise. (RUN_TEST_f_f1): Likewise. (RUN_TEST_LOOP_f_f1): Likewise. (RUN_TEST_fF_f1): Likewise. (RUN_TEST_LOOP_fF_f1): Likewise. (RUN_TEST_fI_f1): Likewise. (RUN_TEST_LOOP_fI_f1): Likewise. (RUN_TEST_ffI_f1_mod8): Likewise. (RUN_TEST_LOOP_ffI_f1_mod8): Likewise. (RUN_TEST_Ff_b1): Likewise. (RUN_TEST_LOOP_Ff_b1): Likewise. (RUN_TEST_Ffp_b1): Likewise. (RUN_TEST_LOOP_Ffp_b1): Likewise. (RUN_TEST_c_c): Likewise. (RUN_TEST_LOOP_c_c): Likewise. (RUN_TEST_cc_c): Likewise. (RUN_TEST_LOOP_cc_c): Likewise. (RUN_TEST_f_i): Likewise. (RUN_TEST_LOOP_f_i): Likewise. (RUN_TEST_f_i_tg): Likewise. (RUN_TEST_LOOP_f_i_tg): Likewise. (RUN_TEST_ff_b): Likewise. (RUN_TEST_LOOP_ff_b): Likewise. (RUN_TEST_ff_i_tg): Likewise. (RUN_TEST_LOOP_ff_i_tg): Likewise. (RUN_TEST_f_b): Likewise. (RUN_TEST_LOOP_f_b): Likewise. (RUN_TEST_f_b_tg): Likewise. (RUN_TEST_LOOP_f_b_tg): Likewise. (RUN_TEST_f_l): Likewise. (RUN_TEST_LOOP_f_l): Likewise. (RUN_TEST_f_L): Likewise. (RUN_TEST_LOOP_f_L): Likewise. (RUN_TEST_fFF_11): Likewise. (RUN_TEST_LOOP_fFF_11): Likewise. (VEC_SUFF): Likewise. (STR_CONCAT): Likewise. (STR_CON3): Likewise. (HAVE_VECTOR): Likewise. (START): Likewise. (END): Likewise. (END_COMPLEX): Likewise. (ALL_RM_TEST): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Likewise. (parse_opt): Likewise. (argp): Likewise. (check_ulp): Likewise. (main): Likewise. (do_test): New function. Call tests of individual functions previously called from main.
2017-02-07 02:12:16 +08:00
#define RUN_TEST_fp_f(ARG_STR, FUNC_NAME, ARG, EXPECTED, \
EXCEPTIONS) \
do \
if (enable_test (EXCEPTIONS)) \
{ \
COMMON_TEST_SETUP (ARG_STR); \
check_float (test_name, FUNC_TEST (FUNC_NAME) (&(ARG)), \
EXPECTED, EXCEPTIONS); \
COMMON_TEST_CLEANUP; \
} \
while (0)
#define RUN_TEST_LOOP_fp_f(FUNC_NAME, ARRAY, ROUNDING_MODE) \
IF_ROUND_INIT_ ## ROUNDING_MODE \
for (size_t i = 0; i < sizeof (ARRAY) / sizeof (ARRAY)[0]; i++) \
RUN_TEST_fp_f ((ARRAY)[i].arg_str, FUNC_NAME, (ARRAY)[i].arg, \
(ARRAY)[i].RM_##ROUNDING_MODE.expected, \
(ARRAY)[i].RM_##ROUNDING_MODE.exceptions); \
ROUND_RESTORE_ ## ROUNDING_MODE
#define RUN_TEST_2_f(ARG_STR, FUNC_NAME, ARG1, ARG2, EXPECTED, \
EXCEPTIONS) \
do \
if (enable_test (EXCEPTIONS)) \
{ \
COMMON_TEST_SETUP (ARG_STR); \
check_float (test_name, FUNC_TEST (FUNC_NAME) (ARG1, ARG2), \
EXPECTED, EXCEPTIONS); \
COMMON_TEST_CLEANUP; \
} \
while (0)
#define RUN_TEST_LOOP_2_f(FUNC_NAME, ARRAY, ROUNDING_MODE) \
IF_ROUND_INIT_ ## ROUNDING_MODE \
for (size_t i = 0; i < sizeof (ARRAY) / sizeof (ARRAY)[0]; i++) \
RUN_TEST_2_f ((ARRAY)[i].arg_str, FUNC_NAME, (ARRAY)[i].arg1, \
(ARRAY)[i].arg2, \
(ARRAY)[i].RM_##ROUNDING_MODE.expected, \
(ARRAY)[i].RM_##ROUNDING_MODE.exceptions); \
ROUND_RESTORE_ ## ROUNDING_MODE
#define RUN_TEST_ff_f RUN_TEST_2_f
#define RUN_TEST_LOOP_ff_f RUN_TEST_LOOP_2_f
#define RUN_TEST_LOOP_fj_f RUN_TEST_LOOP_2_f
Add test infrastructure for narrowing libm functions. This patch continues preparations for adding TS 18661-1 narrowing libm functions by adding the required testsuite infrastructure to test such functions through the libm-test infrastructure. That infrastructure is based around testing for a single type, FLOAT. For the narrowing functions, FLOAT, the "main" type for testing, is the function return type; the argument type is ARG_FLOAT. This is consistent with how the code built once for each type, libm-test-support.c, depends on FLOAT for such things as calculating ulps errors in results but can already handle different argument types (pointers, integers, long double for nexttoward). Makefile machinery is added to handle building tests for all pairs of types for which there are narrowing functions (as with non-narrowing functions, aliases are tested just the same as the functions they alias). gen-auto-libm-tests gains a --narrow option for building outputs for narrowing functions (so narrowing sqrt and fma will share the same inputs as non-narrowing, but gen-auto-libm-tests will be run with and without that option to generate different output files). In the narrowing case, the auto-libm-test-out-narrow-* files include annotations for each test about what properties ARG_FLOAT must have to be able to represent all the inputs for that test; those annotations result in calls to the TEST_COND_arg_fmt macro. gen-libm-test.pl has some minor updates to handle narrowing tests (for example, arguments in such tests must be surrounded by ARG_LIT calls instead of LIT calls). Various new macros are added to the C test support code (for example, sNaN initializers need to be properly typed, so arg_snan_value is added; other such arg_* macros are added as it seems cleanest to do so, though some are not strictly required). Special-casing of the ibm128 format to allow for its limitations is adjusted to handle it as the argument format as well as as the result format; thus, the tests of the new functions allow nonzero ulps only in the case where ibm128 is the argument format, as otherwise the functions correspond to fully-defined IEEE operations. The ulps in question appear as e.g. 'Function: "add_ldouble"' in libm-test-ulps (with 1ulp errors then listed for double and float for that function in powerpc); no support is added to generate corresponding faddl / daddl ulps listings in the ulps table in the manual. For the previous patch, I noted the need to avoid spurious macro expansions of identifiers such as "add". A test test-narrow-macros.c is added to verify such macro expansions are successfully avoided, and there is also a -mlong-double-64 version of that test for ldbl-opt. This test is set up to cover the full set of relevant identifiers from the start rather than adding functions one at a time as each function group is added. Tested for x86_64 (this patch in isolation, as well as testing for various configurations in conjunction with the actual addition of "add" functions). * math/Makefile (test-type-pairs): New variable. (test-type-pairs-f64xf128-yes): Likewise. (tests): Add test-narrow-macros. (libm-test-funcs-narrow): New variable. (libm-test-c-narrow): Likewise. (generated): Add $(libm-test-c-narrow). (libm-tests-base-narrow): New variable. (libm-tests-narrow): Likewise. (libm-tests): Add $(libm-tests-narrow). (libm-tests-for-type): Handle $(libm-tests-narrow). (libm-test-c-narrow-obj): New variable. ($(libm-test-c-narrow-obj)): New rule. ($(foreach t,$(libm-tests-narrow),$(objpfx)$(t).c)): Likewise. ($(foreach f,$(libm-test-funcs-narrow),$(objpfx)$(o)-$(f).o)): Use $(o-iterator) to set dependencies and CFLAGS. * math/gen-auto-libm-tests.c: Document use for narrowing functions. (output_for_one_input_case): Take argument NARROW. (generate_output): Likewise. Update call to output_for_one_input_case. (main): Take --narrow option. Update call to generate_output. * math/gen-libm-test.pl (_apply_lit): Take macro name as argument. (apply_lit): Update call to _apply_lit. (apply_arglit): New function. (parse_args): Handle "a" arguments. (parse_auto_input): Handle format names using ":". * math/README.libm-test: Document "a" parameter type. * math/libm-test-support.h (ARG_TYPE_MIN): New macro. (ARG_TYPE_TRUE_MIN): Likewise. (ARG_TYPE_MAX): Likwise. (ARG_MIN_EXP): Likewise. (ARG_MAX_EXP): Likewise. (ARG_MANT_DIG): Likewise. (TEST_COND_arg_ibm128): Likewise. (TEST_COND_ibm128_libgcc): Define conditional on [ARG_FLOAT]. (TEST_COND_arg_fmt): New macro. (init_max_error): Update prototype. * math/libm-test-support.c (test_ibm128): New variable. (init_max_error): Take argument testing_ibm128 and set test_ibm128 instead of using [TEST_COND_ibm128] conditional. (test_exceptions): Use test_ibm128 instead of TEST_COND_ibm128. * math/libm-test-driver.c (STR_ARG_FLOAT): New macro. [TEST_NARROW] (TEST_MSG): New definition. (arg_plus_zero): New macro. (arg_minus_zero): Likewise. (arg_plus_infty): Likewise. (arg_minus_infty): Likewise. (arg_qnan_value_pl): Likewise. (arg_qnan_value): Likewise. (arg_snan_value_pl): Likewise. (arg_snan_value): Likewise. (arg_max_value): Likewise. (arg_min_value): Likewise. (arg_min_subnorm_value): Likewise. [ARG_FLOAT] (struct test_aa_f_data): New struct type. (RUN_TEST_LOOP_aa_f): New macro. (TEST_SUFF): New macro. (TEST_SUFF_STR): Likewise. [!TEST_MATHVEC] (VEC_SUFF): Don't define. (TEST_COND_any_ibm128): New macro. (START): Use TEST_SUFF and TEST_SUFF_STR in initializer for this_func. Update call to init_max_error. * math/test-double.h (FUNC_NARROW_PREFIX): New macro. * math/test-float.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float128.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-math-scalar.h (TEST_NARROW): Likewise. * math/test-math-vector.h (TEST_NARROW): Likewise. * math/test-arg-double.h: New file. * math/test-arg-float128.h: Likewise. * math/test-arg-float32x.h: Likewise. * math/test-arg-float64.h: Likewise. * math/test-arg-float64x.h: Likewise. * math/test-arg-ldouble.h: Likewise. * math/test-math-narrow.h: Likewise. * math/test-narrow-macros.c: Likewise. * sysdeps/ieee754/ldbl-opt/test-narrow-macros-ldbl-64.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (tests): Add test-narrow-macros-ldbl-64. (CFLAGS-test-narrow-macros-ldbl-64.c): New variable.
2018-02-10 05:55:48 +08:00
#define RUN_TEST_LOOP_aa_f RUN_TEST_LOOP_2_f
Move non-function-specific parts of libm-test.inc to separate file. libm-test.inc contains both test infrastructure and tests of individual functions. This patch moves the infrastructure to a separate file libm-test-driver.c. This is in preparation for splitting the tests of individual functions into separate source files, which will be processed individually by gen-libm-test.pl (so e.g. libm-test-acos.inc and auto-libm-test-out-acos will be processed by gen-libm-test.pl to produce libm-test-acos.c, and files such as test-double-acos.c will be generated by the Makefile to include appropriate headers, libm-test-driver.c and libm-test-acos.c so tests of each function get run separately). It is no doubt possible to split things up further, so that functions not depending on the type being tested only get compiled once and most of those depending on the type being tested get compiled once per type (rather than separately for variants such as inline / no-inline, and separately for each function being tested after that split), but this rearrangement as-is seems a useful incremental step towards splitting these tests by function. * math/libm-test-driver.c: New file. Based on math/libm-test.inc. * math/libm-test.inc: Move all contents, other than tests of individual functions, to libm-test-driver.c. [!FE_TONEAREST] (FE_TONEAREST): Move to libm-test-driver.c. [!FE_TOWARDZERO] (FE_TOWARDZERO): Likewise. [!FE_UPWARD] (FE_UPWARD): Likewise. [!FE_DOWNWARD] (FE_DOWNWARD): Likewise. (NO_EXCEPTION): Likewise. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ULP_IDX): Likewise. (QTYPE_STR): Likewise. (TEST_COND_binary32): Likewise. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (lit_pi_3_m_4_d): Likewise. (lit_pi_3_m_4_ln10_m_d): Likewise. (lit_pi_2_ln10_m_d): Likewise. (lit_pi_4_ln10_m_d): Likewise. (lit_pi_ln10_d): Likewise. (lit_pi_2_d): Likewise. (lit_pi_4_d): Likewise. (lit_pi): Likewise. (lit_e): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (plus_zero): Likewise. (minus_zero): Likewise. (plus_infty): Likewise. (minus_infty): Likewise. (qnan_value_pl): Likewise. (qnan_value): Likewise. (snan_value_pl): Likewise. (snan_value): Likewise. (max_value): Likewise. (min_value): Likewise. (min_subnorm_value): Likewise. (snan_value_ld): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (struct test_f_f_data): Likewise. (struct test_ff_f_data): Likewise. (struct test_fj_f_data): Likewise. (struct test_fi_f_data): Likewise. (struct test_fl_f_data): Likewise. (struct test_if_f_data): Likewise. (struct test_fff_f_data): Likewise. (struct test_fiu_M_data): Likewise. (struct test_fiu_U_data): Likewise. (struct test_c_f_data): Likewise. (struct test_f_f1_data): Likewise. (struct test_fF_f1_data): Likewise. (struct test_ffI_f1_data): Likewise. (struct test_c_c_data): Likewise. (struct test_cc_c_data): Likewise. (struct test_f_i_data): Likewise. (struct test_ff_i_data): Likewise. (struct test_f_l_data): Likewise. (struct test_f_L_data): Likewise. (struct test_fFF_11_data): Likewise. (struct test_Ff_b1_data): Likewise. (IF_ROUND_INIT_): Likewise. (IF_ROUND_INIT_FE_DOWNWARD): Likewise. (IF_ROUND_INIT_FE_TONEAREST): Likewise. (IF_ROUND_INIT_FE_TOWARDZERO): Likewise. (IF_ROUND_INIT_FE_UPWARD): Likewise. (ROUND_RESTORE_): Likewise. (ROUND_RESTORE_FE_DOWNWARD): Likewise. (ROUND_RESTORE_FE_TONEAREST): Likewise. (ROUND_RESTORE_FE_TOWARDZERO): Likewise. (ROUND_RESTORE_FE_UPWARD): Likewise. (RM_): Likewise. (RM_FE_DOWNWARD): Likewise. (RM_FE_TONEAREST): Likewise. (RM_FE_TOWARDZERO): Likewise. (RM_FE_UPWARD): Likewise. (COMMON_TEST_SETUP): Likewise. (EXTRA_OUTPUT_TEST_SETUP): Likewise. (COMMON_TEST_CLEANUP): Likewise. (EXTRA_OUTPUT_TEST_CLEANUP): Likewise. (RUN_TEST_f_f): Likewise. (RUN_TEST_LOOP_f_f): Likewise. (RUN_TEST_fp_f): Likewise. (RUN_TEST_LOOP_fp_f): Likewise. (RUN_TEST_2_f): Likewise. (RUN_TEST_LOOP_2_f): Likewise. (RUN_TEST_ff_f): Likewise. (RUN_TEST_LOOP_ff_f): Likewise. (RUN_TEST_LOOP_fj_f): Likewise. (RUN_TEST_fi_f): Likewise. (RUN_TEST_LOOP_fi_f): Likewise. (RUN_TEST_fl_f): Likewise. (RUN_TEST_LOOP_fl_f): Likewise. (RUN_TEST_if_f): Likewise. (RUN_TEST_LOOP_if_f): Likewise. (RUN_TEST_fff_f): Likewise. (RUN_TEST_LOOP_fff_f): Likewise. (RUN_TEST_fiu_M): Likewise. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (RUN_TEST_c_f): Likewise. (RUN_TEST_LOOP_c_f): Likewise. (RUN_TEST_f_f1): Likewise. (RUN_TEST_LOOP_f_f1): Likewise. (RUN_TEST_fF_f1): Likewise. (RUN_TEST_LOOP_fF_f1): Likewise. (RUN_TEST_fI_f1): Likewise. (RUN_TEST_LOOP_fI_f1): Likewise. (RUN_TEST_ffI_f1_mod8): Likewise. (RUN_TEST_LOOP_ffI_f1_mod8): Likewise. (RUN_TEST_Ff_b1): Likewise. (RUN_TEST_LOOP_Ff_b1): Likewise. (RUN_TEST_Ffp_b1): Likewise. (RUN_TEST_LOOP_Ffp_b1): Likewise. (RUN_TEST_c_c): Likewise. (RUN_TEST_LOOP_c_c): Likewise. (RUN_TEST_cc_c): Likewise. (RUN_TEST_LOOP_cc_c): Likewise. (RUN_TEST_f_i): Likewise. (RUN_TEST_LOOP_f_i): Likewise. (RUN_TEST_f_i_tg): Likewise. (RUN_TEST_LOOP_f_i_tg): Likewise. (RUN_TEST_ff_b): Likewise. (RUN_TEST_LOOP_ff_b): Likewise. (RUN_TEST_ff_i_tg): Likewise. (RUN_TEST_LOOP_ff_i_tg): Likewise. (RUN_TEST_f_b): Likewise. (RUN_TEST_LOOP_f_b): Likewise. (RUN_TEST_f_b_tg): Likewise. (RUN_TEST_LOOP_f_b_tg): Likewise. (RUN_TEST_f_l): Likewise. (RUN_TEST_LOOP_f_l): Likewise. (RUN_TEST_f_L): Likewise. (RUN_TEST_LOOP_f_L): Likewise. (RUN_TEST_fFF_11): Likewise. (RUN_TEST_LOOP_fFF_11): Likewise. (VEC_SUFF): Likewise. (STR_CONCAT): Likewise. (STR_CON3): Likewise. (HAVE_VECTOR): Likewise. (START): Likewise. (END): Likewise. (END_COMPLEX): Likewise. (ALL_RM_TEST): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Likewise. (parse_opt): Likewise. (argp): Likewise. (check_ulp): Likewise. (main): Likewise. (do_test): New function. Call tests of individual functions previously called from main.
2017-02-07 02:12:16 +08:00
#define RUN_TEST_fi_f RUN_TEST_2_f
#define RUN_TEST_LOOP_fi_f RUN_TEST_LOOP_2_f
#define RUN_TEST_fl_f RUN_TEST_2_f
#define RUN_TEST_LOOP_fl_f RUN_TEST_LOOP_2_f
#define RUN_TEST_if_f RUN_TEST_2_f
#define RUN_TEST_LOOP_if_f RUN_TEST_LOOP_2_f
Add narrowing fma functions This patch adds the narrowing fused multiply-add functions from TS 18661-1 / TS 18661-3 / C2X to glibc's libm: ffma, ffmal, dfmal, f32fmaf64, f32fmaf32x, f32xfmaf64 for all configurations; f32fmaf64x, f32fmaf128, f64fmaf64x, f64fmaf128, f32xfmaf64x, f32xfmaf128, f64xfmaf128 for configurations with _Float64x and _Float128; __f32fmaieee128 and __f64fmaieee128 aliases in the powerpc64le case (for calls to ffmal and dfmal when long double is IEEE binary128). Corresponding tgmath.h macro support is also added. The changes are mostly similar to those for the other narrowing functions previously added, especially that for sqrt, so the description of those generally applies to this patch as well. As with sqrt, I reused the same test inputs in auto-libm-test-in as for non-narrowing fma rather than adding extra or separate inputs for narrowing fma. The tests in libm-test-narrow-fma.inc also follow those for non-narrowing fma. The non-narrowing fma has a known bug (bug 6801) that it does not set errno on errors (overflow, underflow, Inf * 0, Inf - Inf). Rather than fixing this or having narrowing fma check for errors when non-narrowing does not (complicating the cases when narrowing fma can otherwise be an alias for a non-narrowing function), this patch does not attempt to check for errors from narrowing fma and set errno; the CHECK_NARROW_FMA macro is still present, but as a placeholder that does nothing, and this missing errno setting is considered to be covered by the existing bug rather than needing a separate open bug. missing-errno annotations are duly added to many of the auto-libm-test-in test inputs for fma. This completes adding all the new functions from TS 18661-1 to glibc, so will be followed by corresponding stdc-predef.h changes to define __STDC_IEC_60559_BFP__ and __STDC_IEC_60559_COMPLEX__, as the support for TS 18661-1 will be at a similar level to that for C standard floating-point facilities up to C11 (pragmas not implemented, but library functions done). (There are still further changes to be done to implement changes to the types of fromfp functions from N2548.) Tested as followed: natively with the full glibc testsuite for x86_64 (GCC 11, 7, 6) and x86 (GCC 11); with build-many-glibcs.py with GCC 11, 7 and 6; cross testing of math/ tests for powerpc64le, powerpc32 hard float, mips64 (all three ABIs, both hard and soft float). The different GCC versions are to cover the different cases in tgmath.h and tgmath.h tests properly (GCC 6 has _Float* only as typedefs in glibc headers, GCC 7 has proper _Float* support, GCC 8 adds __builtin_tgmath).
2021-09-23 05:25:31 +08:00
#define RUN_TEST_3_f(ARG_STR, FUNC_NAME, ARG1, ARG2, ARG3, \
EXPECTED, EXCEPTIONS) \
Move non-function-specific parts of libm-test.inc to separate file. libm-test.inc contains both test infrastructure and tests of individual functions. This patch moves the infrastructure to a separate file libm-test-driver.c. This is in preparation for splitting the tests of individual functions into separate source files, which will be processed individually by gen-libm-test.pl (so e.g. libm-test-acos.inc and auto-libm-test-out-acos will be processed by gen-libm-test.pl to produce libm-test-acos.c, and files such as test-double-acos.c will be generated by the Makefile to include appropriate headers, libm-test-driver.c and libm-test-acos.c so tests of each function get run separately). It is no doubt possible to split things up further, so that functions not depending on the type being tested only get compiled once and most of those depending on the type being tested get compiled once per type (rather than separately for variants such as inline / no-inline, and separately for each function being tested after that split), but this rearrangement as-is seems a useful incremental step towards splitting these tests by function. * math/libm-test-driver.c: New file. Based on math/libm-test.inc. * math/libm-test.inc: Move all contents, other than tests of individual functions, to libm-test-driver.c. [!FE_TONEAREST] (FE_TONEAREST): Move to libm-test-driver.c. [!FE_TOWARDZERO] (FE_TOWARDZERO): Likewise. [!FE_UPWARD] (FE_UPWARD): Likewise. [!FE_DOWNWARD] (FE_DOWNWARD): Likewise. (NO_EXCEPTION): Likewise. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ULP_IDX): Likewise. (QTYPE_STR): Likewise. (TEST_COND_binary32): Likewise. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (lit_pi_3_m_4_d): Likewise. (lit_pi_3_m_4_ln10_m_d): Likewise. (lit_pi_2_ln10_m_d): Likewise. (lit_pi_4_ln10_m_d): Likewise. (lit_pi_ln10_d): Likewise. (lit_pi_2_d): Likewise. (lit_pi_4_d): Likewise. (lit_pi): Likewise. (lit_e): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (plus_zero): Likewise. (minus_zero): Likewise. (plus_infty): Likewise. (minus_infty): Likewise. (qnan_value_pl): Likewise. (qnan_value): Likewise. (snan_value_pl): Likewise. (snan_value): Likewise. (max_value): Likewise. (min_value): Likewise. (min_subnorm_value): Likewise. (snan_value_ld): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (struct test_f_f_data): Likewise. (struct test_ff_f_data): Likewise. (struct test_fj_f_data): Likewise. (struct test_fi_f_data): Likewise. (struct test_fl_f_data): Likewise. (struct test_if_f_data): Likewise. (struct test_fff_f_data): Likewise. (struct test_fiu_M_data): Likewise. (struct test_fiu_U_data): Likewise. (struct test_c_f_data): Likewise. (struct test_f_f1_data): Likewise. (struct test_fF_f1_data): Likewise. (struct test_ffI_f1_data): Likewise. (struct test_c_c_data): Likewise. (struct test_cc_c_data): Likewise. (struct test_f_i_data): Likewise. (struct test_ff_i_data): Likewise. (struct test_f_l_data): Likewise. (struct test_f_L_data): Likewise. (struct test_fFF_11_data): Likewise. (struct test_Ff_b1_data): Likewise. (IF_ROUND_INIT_): Likewise. (IF_ROUND_INIT_FE_DOWNWARD): Likewise. (IF_ROUND_INIT_FE_TONEAREST): Likewise. (IF_ROUND_INIT_FE_TOWARDZERO): Likewise. (IF_ROUND_INIT_FE_UPWARD): Likewise. (ROUND_RESTORE_): Likewise. (ROUND_RESTORE_FE_DOWNWARD): Likewise. (ROUND_RESTORE_FE_TONEAREST): Likewise. (ROUND_RESTORE_FE_TOWARDZERO): Likewise. (ROUND_RESTORE_FE_UPWARD): Likewise. (RM_): Likewise. (RM_FE_DOWNWARD): Likewise. (RM_FE_TONEAREST): Likewise. (RM_FE_TOWARDZERO): Likewise. (RM_FE_UPWARD): Likewise. (COMMON_TEST_SETUP): Likewise. (EXTRA_OUTPUT_TEST_SETUP): Likewise. (COMMON_TEST_CLEANUP): Likewise. (EXTRA_OUTPUT_TEST_CLEANUP): Likewise. (RUN_TEST_f_f): Likewise. (RUN_TEST_LOOP_f_f): Likewise. (RUN_TEST_fp_f): Likewise. (RUN_TEST_LOOP_fp_f): Likewise. (RUN_TEST_2_f): Likewise. (RUN_TEST_LOOP_2_f): Likewise. (RUN_TEST_ff_f): Likewise. (RUN_TEST_LOOP_ff_f): Likewise. (RUN_TEST_LOOP_fj_f): Likewise. (RUN_TEST_fi_f): Likewise. (RUN_TEST_LOOP_fi_f): Likewise. (RUN_TEST_fl_f): Likewise. (RUN_TEST_LOOP_fl_f): Likewise. (RUN_TEST_if_f): Likewise. (RUN_TEST_LOOP_if_f): Likewise. (RUN_TEST_fff_f): Likewise. (RUN_TEST_LOOP_fff_f): Likewise. (RUN_TEST_fiu_M): Likewise. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (RUN_TEST_c_f): Likewise. (RUN_TEST_LOOP_c_f): Likewise. (RUN_TEST_f_f1): Likewise. (RUN_TEST_LOOP_f_f1): Likewise. (RUN_TEST_fF_f1): Likewise. (RUN_TEST_LOOP_fF_f1): Likewise. (RUN_TEST_fI_f1): Likewise. (RUN_TEST_LOOP_fI_f1): Likewise. (RUN_TEST_ffI_f1_mod8): Likewise. (RUN_TEST_LOOP_ffI_f1_mod8): Likewise. (RUN_TEST_Ff_b1): Likewise. (RUN_TEST_LOOP_Ff_b1): Likewise. (RUN_TEST_Ffp_b1): Likewise. (RUN_TEST_LOOP_Ffp_b1): Likewise. (RUN_TEST_c_c): Likewise. (RUN_TEST_LOOP_c_c): Likewise. (RUN_TEST_cc_c): Likewise. (RUN_TEST_LOOP_cc_c): Likewise. (RUN_TEST_f_i): Likewise. (RUN_TEST_LOOP_f_i): Likewise. (RUN_TEST_f_i_tg): Likewise. (RUN_TEST_LOOP_f_i_tg): Likewise. (RUN_TEST_ff_b): Likewise. (RUN_TEST_LOOP_ff_b): Likewise. (RUN_TEST_ff_i_tg): Likewise. (RUN_TEST_LOOP_ff_i_tg): Likewise. (RUN_TEST_f_b): Likewise. (RUN_TEST_LOOP_f_b): Likewise. (RUN_TEST_f_b_tg): Likewise. (RUN_TEST_LOOP_f_b_tg): Likewise. (RUN_TEST_f_l): Likewise. (RUN_TEST_LOOP_f_l): Likewise. (RUN_TEST_f_L): Likewise. (RUN_TEST_LOOP_f_L): Likewise. (RUN_TEST_fFF_11): Likewise. (RUN_TEST_LOOP_fFF_11): Likewise. (VEC_SUFF): Likewise. (STR_CONCAT): Likewise. (STR_CON3): Likewise. (HAVE_VECTOR): Likewise. (START): Likewise. (END): Likewise. (END_COMPLEX): Likewise. (ALL_RM_TEST): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Likewise. (parse_opt): Likewise. (argp): Likewise. (check_ulp): Likewise. (main): Likewise. (do_test): New function. Call tests of individual functions previously called from main.
2017-02-07 02:12:16 +08:00
do \
if (enable_test (EXCEPTIONS)) \
{ \
COMMON_TEST_SETUP (ARG_STR); \
check_float (test_name, FUNC_TEST (FUNC_NAME) (ARG1, ARG2, ARG3), \
EXPECTED, EXCEPTIONS); \
COMMON_TEST_CLEANUP; \
} \
while (0)
Add narrowing fma functions This patch adds the narrowing fused multiply-add functions from TS 18661-1 / TS 18661-3 / C2X to glibc's libm: ffma, ffmal, dfmal, f32fmaf64, f32fmaf32x, f32xfmaf64 for all configurations; f32fmaf64x, f32fmaf128, f64fmaf64x, f64fmaf128, f32xfmaf64x, f32xfmaf128, f64xfmaf128 for configurations with _Float64x and _Float128; __f32fmaieee128 and __f64fmaieee128 aliases in the powerpc64le case (for calls to ffmal and dfmal when long double is IEEE binary128). Corresponding tgmath.h macro support is also added. The changes are mostly similar to those for the other narrowing functions previously added, especially that for sqrt, so the description of those generally applies to this patch as well. As with sqrt, I reused the same test inputs in auto-libm-test-in as for non-narrowing fma rather than adding extra or separate inputs for narrowing fma. The tests in libm-test-narrow-fma.inc also follow those for non-narrowing fma. The non-narrowing fma has a known bug (bug 6801) that it does not set errno on errors (overflow, underflow, Inf * 0, Inf - Inf). Rather than fixing this or having narrowing fma check for errors when non-narrowing does not (complicating the cases when narrowing fma can otherwise be an alias for a non-narrowing function), this patch does not attempt to check for errors from narrowing fma and set errno; the CHECK_NARROW_FMA macro is still present, but as a placeholder that does nothing, and this missing errno setting is considered to be covered by the existing bug rather than needing a separate open bug. missing-errno annotations are duly added to many of the auto-libm-test-in test inputs for fma. This completes adding all the new functions from TS 18661-1 to glibc, so will be followed by corresponding stdc-predef.h changes to define __STDC_IEC_60559_BFP__ and __STDC_IEC_60559_COMPLEX__, as the support for TS 18661-1 will be at a similar level to that for C standard floating-point facilities up to C11 (pragmas not implemented, but library functions done). (There are still further changes to be done to implement changes to the types of fromfp functions from N2548.) Tested as followed: natively with the full glibc testsuite for x86_64 (GCC 11, 7, 6) and x86 (GCC 11); with build-many-glibcs.py with GCC 11, 7 and 6; cross testing of math/ tests for powerpc64le, powerpc32 hard float, mips64 (all three ABIs, both hard and soft float). The different GCC versions are to cover the different cases in tgmath.h and tgmath.h tests properly (GCC 6 has _Float* only as typedefs in glibc headers, GCC 7 has proper _Float* support, GCC 8 adds __builtin_tgmath).
2021-09-23 05:25:31 +08:00
#define RUN_TEST_LOOP_3_f(FUNC_NAME, ARRAY, ROUNDING_MODE) \
Move non-function-specific parts of libm-test.inc to separate file. libm-test.inc contains both test infrastructure and tests of individual functions. This patch moves the infrastructure to a separate file libm-test-driver.c. This is in preparation for splitting the tests of individual functions into separate source files, which will be processed individually by gen-libm-test.pl (so e.g. libm-test-acos.inc and auto-libm-test-out-acos will be processed by gen-libm-test.pl to produce libm-test-acos.c, and files such as test-double-acos.c will be generated by the Makefile to include appropriate headers, libm-test-driver.c and libm-test-acos.c so tests of each function get run separately). It is no doubt possible to split things up further, so that functions not depending on the type being tested only get compiled once and most of those depending on the type being tested get compiled once per type (rather than separately for variants such as inline / no-inline, and separately for each function being tested after that split), but this rearrangement as-is seems a useful incremental step towards splitting these tests by function. * math/libm-test-driver.c: New file. Based on math/libm-test.inc. * math/libm-test.inc: Move all contents, other than tests of individual functions, to libm-test-driver.c. [!FE_TONEAREST] (FE_TONEAREST): Move to libm-test-driver.c. [!FE_TOWARDZERO] (FE_TOWARDZERO): Likewise. [!FE_UPWARD] (FE_UPWARD): Likewise. [!FE_DOWNWARD] (FE_DOWNWARD): Likewise. (NO_EXCEPTION): Likewise. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ULP_IDX): Likewise. (QTYPE_STR): Likewise. (TEST_COND_binary32): Likewise. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (lit_pi_3_m_4_d): Likewise. (lit_pi_3_m_4_ln10_m_d): Likewise. (lit_pi_2_ln10_m_d): Likewise. (lit_pi_4_ln10_m_d): Likewise. (lit_pi_ln10_d): Likewise. (lit_pi_2_d): Likewise. (lit_pi_4_d): Likewise. (lit_pi): Likewise. (lit_e): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (plus_zero): Likewise. (minus_zero): Likewise. (plus_infty): Likewise. (minus_infty): Likewise. (qnan_value_pl): Likewise. (qnan_value): Likewise. (snan_value_pl): Likewise. (snan_value): Likewise. (max_value): Likewise. (min_value): Likewise. (min_subnorm_value): Likewise. (snan_value_ld): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (struct test_f_f_data): Likewise. (struct test_ff_f_data): Likewise. (struct test_fj_f_data): Likewise. (struct test_fi_f_data): Likewise. (struct test_fl_f_data): Likewise. (struct test_if_f_data): Likewise. (struct test_fff_f_data): Likewise. (struct test_fiu_M_data): Likewise. (struct test_fiu_U_data): Likewise. (struct test_c_f_data): Likewise. (struct test_f_f1_data): Likewise. (struct test_fF_f1_data): Likewise. (struct test_ffI_f1_data): Likewise. (struct test_c_c_data): Likewise. (struct test_cc_c_data): Likewise. (struct test_f_i_data): Likewise. (struct test_ff_i_data): Likewise. (struct test_f_l_data): Likewise. (struct test_f_L_data): Likewise. (struct test_fFF_11_data): Likewise. (struct test_Ff_b1_data): Likewise. (IF_ROUND_INIT_): Likewise. (IF_ROUND_INIT_FE_DOWNWARD): Likewise. (IF_ROUND_INIT_FE_TONEAREST): Likewise. (IF_ROUND_INIT_FE_TOWARDZERO): Likewise. (IF_ROUND_INIT_FE_UPWARD): Likewise. (ROUND_RESTORE_): Likewise. (ROUND_RESTORE_FE_DOWNWARD): Likewise. (ROUND_RESTORE_FE_TONEAREST): Likewise. (ROUND_RESTORE_FE_TOWARDZERO): Likewise. (ROUND_RESTORE_FE_UPWARD): Likewise. (RM_): Likewise. (RM_FE_DOWNWARD): Likewise. (RM_FE_TONEAREST): Likewise. (RM_FE_TOWARDZERO): Likewise. (RM_FE_UPWARD): Likewise. (COMMON_TEST_SETUP): Likewise. (EXTRA_OUTPUT_TEST_SETUP): Likewise. (COMMON_TEST_CLEANUP): Likewise. (EXTRA_OUTPUT_TEST_CLEANUP): Likewise. (RUN_TEST_f_f): Likewise. (RUN_TEST_LOOP_f_f): Likewise. (RUN_TEST_fp_f): Likewise. (RUN_TEST_LOOP_fp_f): Likewise. (RUN_TEST_2_f): Likewise. (RUN_TEST_LOOP_2_f): Likewise. (RUN_TEST_ff_f): Likewise. (RUN_TEST_LOOP_ff_f): Likewise. (RUN_TEST_LOOP_fj_f): Likewise. (RUN_TEST_fi_f): Likewise. (RUN_TEST_LOOP_fi_f): Likewise. (RUN_TEST_fl_f): Likewise. (RUN_TEST_LOOP_fl_f): Likewise. (RUN_TEST_if_f): Likewise. (RUN_TEST_LOOP_if_f): Likewise. (RUN_TEST_fff_f): Likewise. (RUN_TEST_LOOP_fff_f): Likewise. (RUN_TEST_fiu_M): Likewise. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (RUN_TEST_c_f): Likewise. (RUN_TEST_LOOP_c_f): Likewise. (RUN_TEST_f_f1): Likewise. (RUN_TEST_LOOP_f_f1): Likewise. (RUN_TEST_fF_f1): Likewise. (RUN_TEST_LOOP_fF_f1): Likewise. (RUN_TEST_fI_f1): Likewise. (RUN_TEST_LOOP_fI_f1): Likewise. (RUN_TEST_ffI_f1_mod8): Likewise. (RUN_TEST_LOOP_ffI_f1_mod8): Likewise. (RUN_TEST_Ff_b1): Likewise. (RUN_TEST_LOOP_Ff_b1): Likewise. (RUN_TEST_Ffp_b1): Likewise. (RUN_TEST_LOOP_Ffp_b1): Likewise. (RUN_TEST_c_c): Likewise. (RUN_TEST_LOOP_c_c): Likewise. (RUN_TEST_cc_c): Likewise. (RUN_TEST_LOOP_cc_c): Likewise. (RUN_TEST_f_i): Likewise. (RUN_TEST_LOOP_f_i): Likewise. (RUN_TEST_f_i_tg): Likewise. (RUN_TEST_LOOP_f_i_tg): Likewise. (RUN_TEST_ff_b): Likewise. (RUN_TEST_LOOP_ff_b): Likewise. (RUN_TEST_ff_i_tg): Likewise. (RUN_TEST_LOOP_ff_i_tg): Likewise. (RUN_TEST_f_b): Likewise. (RUN_TEST_LOOP_f_b): Likewise. (RUN_TEST_f_b_tg): Likewise. (RUN_TEST_LOOP_f_b_tg): Likewise. (RUN_TEST_f_l): Likewise. (RUN_TEST_LOOP_f_l): Likewise. (RUN_TEST_f_L): Likewise. (RUN_TEST_LOOP_f_L): Likewise. (RUN_TEST_fFF_11): Likewise. (RUN_TEST_LOOP_fFF_11): Likewise. (VEC_SUFF): Likewise. (STR_CONCAT): Likewise. (STR_CON3): Likewise. (HAVE_VECTOR): Likewise. (START): Likewise. (END): Likewise. (END_COMPLEX): Likewise. (ALL_RM_TEST): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Likewise. (parse_opt): Likewise. (argp): Likewise. (check_ulp): Likewise. (main): Likewise. (do_test): New function. Call tests of individual functions previously called from main.
2017-02-07 02:12:16 +08:00
IF_ROUND_INIT_ ## ROUNDING_MODE \
for (size_t i = 0; i < sizeof (ARRAY) / sizeof (ARRAY)[0]; i++) \
Add narrowing fma functions This patch adds the narrowing fused multiply-add functions from TS 18661-1 / TS 18661-3 / C2X to glibc's libm: ffma, ffmal, dfmal, f32fmaf64, f32fmaf32x, f32xfmaf64 for all configurations; f32fmaf64x, f32fmaf128, f64fmaf64x, f64fmaf128, f32xfmaf64x, f32xfmaf128, f64xfmaf128 for configurations with _Float64x and _Float128; __f32fmaieee128 and __f64fmaieee128 aliases in the powerpc64le case (for calls to ffmal and dfmal when long double is IEEE binary128). Corresponding tgmath.h macro support is also added. The changes are mostly similar to those for the other narrowing functions previously added, especially that for sqrt, so the description of those generally applies to this patch as well. As with sqrt, I reused the same test inputs in auto-libm-test-in as for non-narrowing fma rather than adding extra or separate inputs for narrowing fma. The tests in libm-test-narrow-fma.inc also follow those for non-narrowing fma. The non-narrowing fma has a known bug (bug 6801) that it does not set errno on errors (overflow, underflow, Inf * 0, Inf - Inf). Rather than fixing this or having narrowing fma check for errors when non-narrowing does not (complicating the cases when narrowing fma can otherwise be an alias for a non-narrowing function), this patch does not attempt to check for errors from narrowing fma and set errno; the CHECK_NARROW_FMA macro is still present, but as a placeholder that does nothing, and this missing errno setting is considered to be covered by the existing bug rather than needing a separate open bug. missing-errno annotations are duly added to many of the auto-libm-test-in test inputs for fma. This completes adding all the new functions from TS 18661-1 to glibc, so will be followed by corresponding stdc-predef.h changes to define __STDC_IEC_60559_BFP__ and __STDC_IEC_60559_COMPLEX__, as the support for TS 18661-1 will be at a similar level to that for C standard floating-point facilities up to C11 (pragmas not implemented, but library functions done). (There are still further changes to be done to implement changes to the types of fromfp functions from N2548.) Tested as followed: natively with the full glibc testsuite for x86_64 (GCC 11, 7, 6) and x86 (GCC 11); with build-many-glibcs.py with GCC 11, 7 and 6; cross testing of math/ tests for powerpc64le, powerpc32 hard float, mips64 (all three ABIs, both hard and soft float). The different GCC versions are to cover the different cases in tgmath.h and tgmath.h tests properly (GCC 6 has _Float* only as typedefs in glibc headers, GCC 7 has proper _Float* support, GCC 8 adds __builtin_tgmath).
2021-09-23 05:25:31 +08:00
RUN_TEST_3_f ((ARRAY)[i].arg_str, FUNC_NAME, (ARRAY)[i].arg1, \
(ARRAY)[i].arg2, (ARRAY)[i].arg3, \
(ARRAY)[i].RM_##ROUNDING_MODE.expected, \
(ARRAY)[i].RM_##ROUNDING_MODE.exceptions); \
Move non-function-specific parts of libm-test.inc to separate file. libm-test.inc contains both test infrastructure and tests of individual functions. This patch moves the infrastructure to a separate file libm-test-driver.c. This is in preparation for splitting the tests of individual functions into separate source files, which will be processed individually by gen-libm-test.pl (so e.g. libm-test-acos.inc and auto-libm-test-out-acos will be processed by gen-libm-test.pl to produce libm-test-acos.c, and files such as test-double-acos.c will be generated by the Makefile to include appropriate headers, libm-test-driver.c and libm-test-acos.c so tests of each function get run separately). It is no doubt possible to split things up further, so that functions not depending on the type being tested only get compiled once and most of those depending on the type being tested get compiled once per type (rather than separately for variants such as inline / no-inline, and separately for each function being tested after that split), but this rearrangement as-is seems a useful incremental step towards splitting these tests by function. * math/libm-test-driver.c: New file. Based on math/libm-test.inc. * math/libm-test.inc: Move all contents, other than tests of individual functions, to libm-test-driver.c. [!FE_TONEAREST] (FE_TONEAREST): Move to libm-test-driver.c. [!FE_TOWARDZERO] (FE_TOWARDZERO): Likewise. [!FE_UPWARD] (FE_UPWARD): Likewise. [!FE_DOWNWARD] (FE_DOWNWARD): Likewise. (NO_EXCEPTION): Likewise. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ULP_IDX): Likewise. (QTYPE_STR): Likewise. (TEST_COND_binary32): Likewise. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (lit_pi_3_m_4_d): Likewise. (lit_pi_3_m_4_ln10_m_d): Likewise. (lit_pi_2_ln10_m_d): Likewise. (lit_pi_4_ln10_m_d): Likewise. (lit_pi_ln10_d): Likewise. (lit_pi_2_d): Likewise. (lit_pi_4_d): Likewise. (lit_pi): Likewise. (lit_e): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (plus_zero): Likewise. (minus_zero): Likewise. (plus_infty): Likewise. (minus_infty): Likewise. (qnan_value_pl): Likewise. (qnan_value): Likewise. (snan_value_pl): Likewise. (snan_value): Likewise. (max_value): Likewise. (min_value): Likewise. (min_subnorm_value): Likewise. (snan_value_ld): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (struct test_f_f_data): Likewise. (struct test_ff_f_data): Likewise. (struct test_fj_f_data): Likewise. (struct test_fi_f_data): Likewise. (struct test_fl_f_data): Likewise. (struct test_if_f_data): Likewise. (struct test_fff_f_data): Likewise. (struct test_fiu_M_data): Likewise. (struct test_fiu_U_data): Likewise. (struct test_c_f_data): Likewise. (struct test_f_f1_data): Likewise. (struct test_fF_f1_data): Likewise. (struct test_ffI_f1_data): Likewise. (struct test_c_c_data): Likewise. (struct test_cc_c_data): Likewise. (struct test_f_i_data): Likewise. (struct test_ff_i_data): Likewise. (struct test_f_l_data): Likewise. (struct test_f_L_data): Likewise. (struct test_fFF_11_data): Likewise. (struct test_Ff_b1_data): Likewise. (IF_ROUND_INIT_): Likewise. (IF_ROUND_INIT_FE_DOWNWARD): Likewise. (IF_ROUND_INIT_FE_TONEAREST): Likewise. (IF_ROUND_INIT_FE_TOWARDZERO): Likewise. (IF_ROUND_INIT_FE_UPWARD): Likewise. (ROUND_RESTORE_): Likewise. (ROUND_RESTORE_FE_DOWNWARD): Likewise. (ROUND_RESTORE_FE_TONEAREST): Likewise. (ROUND_RESTORE_FE_TOWARDZERO): Likewise. (ROUND_RESTORE_FE_UPWARD): Likewise. (RM_): Likewise. (RM_FE_DOWNWARD): Likewise. (RM_FE_TONEAREST): Likewise. (RM_FE_TOWARDZERO): Likewise. (RM_FE_UPWARD): Likewise. (COMMON_TEST_SETUP): Likewise. (EXTRA_OUTPUT_TEST_SETUP): Likewise. (COMMON_TEST_CLEANUP): Likewise. (EXTRA_OUTPUT_TEST_CLEANUP): Likewise. (RUN_TEST_f_f): Likewise. (RUN_TEST_LOOP_f_f): Likewise. (RUN_TEST_fp_f): Likewise. (RUN_TEST_LOOP_fp_f): Likewise. (RUN_TEST_2_f): Likewise. (RUN_TEST_LOOP_2_f): Likewise. (RUN_TEST_ff_f): Likewise. (RUN_TEST_LOOP_ff_f): Likewise. (RUN_TEST_LOOP_fj_f): Likewise. (RUN_TEST_fi_f): Likewise. (RUN_TEST_LOOP_fi_f): Likewise. (RUN_TEST_fl_f): Likewise. (RUN_TEST_LOOP_fl_f): Likewise. (RUN_TEST_if_f): Likewise. (RUN_TEST_LOOP_if_f): Likewise. (RUN_TEST_fff_f): Likewise. (RUN_TEST_LOOP_fff_f): Likewise. (RUN_TEST_fiu_M): Likewise. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (RUN_TEST_c_f): Likewise. (RUN_TEST_LOOP_c_f): Likewise. (RUN_TEST_f_f1): Likewise. (RUN_TEST_LOOP_f_f1): Likewise. (RUN_TEST_fF_f1): Likewise. (RUN_TEST_LOOP_fF_f1): Likewise. (RUN_TEST_fI_f1): Likewise. (RUN_TEST_LOOP_fI_f1): Likewise. (RUN_TEST_ffI_f1_mod8): Likewise. (RUN_TEST_LOOP_ffI_f1_mod8): Likewise. (RUN_TEST_Ff_b1): Likewise. (RUN_TEST_LOOP_Ff_b1): Likewise. (RUN_TEST_Ffp_b1): Likewise. (RUN_TEST_LOOP_Ffp_b1): Likewise. (RUN_TEST_c_c): Likewise. (RUN_TEST_LOOP_c_c): Likewise. (RUN_TEST_cc_c): Likewise. (RUN_TEST_LOOP_cc_c): Likewise. (RUN_TEST_f_i): Likewise. (RUN_TEST_LOOP_f_i): Likewise. (RUN_TEST_f_i_tg): Likewise. (RUN_TEST_LOOP_f_i_tg): Likewise. (RUN_TEST_ff_b): Likewise. (RUN_TEST_LOOP_ff_b): Likewise. (RUN_TEST_ff_i_tg): Likewise. (RUN_TEST_LOOP_ff_i_tg): Likewise. (RUN_TEST_f_b): Likewise. (RUN_TEST_LOOP_f_b): Likewise. (RUN_TEST_f_b_tg): Likewise. (RUN_TEST_LOOP_f_b_tg): Likewise. (RUN_TEST_f_l): Likewise. (RUN_TEST_LOOP_f_l): Likewise. (RUN_TEST_f_L): Likewise. (RUN_TEST_LOOP_f_L): Likewise. (RUN_TEST_fFF_11): Likewise. (RUN_TEST_LOOP_fFF_11): Likewise. (VEC_SUFF): Likewise. (STR_CONCAT): Likewise. (STR_CON3): Likewise. (HAVE_VECTOR): Likewise. (START): Likewise. (END): Likewise. (END_COMPLEX): Likewise. (ALL_RM_TEST): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Likewise. (parse_opt): Likewise. (argp): Likewise. (check_ulp): Likewise. (main): Likewise. (do_test): New function. Call tests of individual functions previously called from main.
2017-02-07 02:12:16 +08:00
ROUND_RESTORE_ ## ROUNDING_MODE
Add narrowing fma functions This patch adds the narrowing fused multiply-add functions from TS 18661-1 / TS 18661-3 / C2X to glibc's libm: ffma, ffmal, dfmal, f32fmaf64, f32fmaf32x, f32xfmaf64 for all configurations; f32fmaf64x, f32fmaf128, f64fmaf64x, f64fmaf128, f32xfmaf64x, f32xfmaf128, f64xfmaf128 for configurations with _Float64x and _Float128; __f32fmaieee128 and __f64fmaieee128 aliases in the powerpc64le case (for calls to ffmal and dfmal when long double is IEEE binary128). Corresponding tgmath.h macro support is also added. The changes are mostly similar to those for the other narrowing functions previously added, especially that for sqrt, so the description of those generally applies to this patch as well. As with sqrt, I reused the same test inputs in auto-libm-test-in as for non-narrowing fma rather than adding extra or separate inputs for narrowing fma. The tests in libm-test-narrow-fma.inc also follow those for non-narrowing fma. The non-narrowing fma has a known bug (bug 6801) that it does not set errno on errors (overflow, underflow, Inf * 0, Inf - Inf). Rather than fixing this or having narrowing fma check for errors when non-narrowing does not (complicating the cases when narrowing fma can otherwise be an alias for a non-narrowing function), this patch does not attempt to check for errors from narrowing fma and set errno; the CHECK_NARROW_FMA macro is still present, but as a placeholder that does nothing, and this missing errno setting is considered to be covered by the existing bug rather than needing a separate open bug. missing-errno annotations are duly added to many of the auto-libm-test-in test inputs for fma. This completes adding all the new functions from TS 18661-1 to glibc, so will be followed by corresponding stdc-predef.h changes to define __STDC_IEC_60559_BFP__ and __STDC_IEC_60559_COMPLEX__, as the support for TS 18661-1 will be at a similar level to that for C standard floating-point facilities up to C11 (pragmas not implemented, but library functions done). (There are still further changes to be done to implement changes to the types of fromfp functions from N2548.) Tested as followed: natively with the full glibc testsuite for x86_64 (GCC 11, 7, 6) and x86 (GCC 11); with build-many-glibcs.py with GCC 11, 7 and 6; cross testing of math/ tests for powerpc64le, powerpc32 hard float, mips64 (all three ABIs, both hard and soft float). The different GCC versions are to cover the different cases in tgmath.h and tgmath.h tests properly (GCC 6 has _Float* only as typedefs in glibc headers, GCC 7 has proper _Float* support, GCC 8 adds __builtin_tgmath).
2021-09-23 05:25:31 +08:00
#define RUN_TEST_LOOP_fff_f RUN_TEST_LOOP_3_f
#define RUN_TEST_LOOP_aaa_f RUN_TEST_LOOP_3_f
Move non-function-specific parts of libm-test.inc to separate file. libm-test.inc contains both test infrastructure and tests of individual functions. This patch moves the infrastructure to a separate file libm-test-driver.c. This is in preparation for splitting the tests of individual functions into separate source files, which will be processed individually by gen-libm-test.pl (so e.g. libm-test-acos.inc and auto-libm-test-out-acos will be processed by gen-libm-test.pl to produce libm-test-acos.c, and files such as test-double-acos.c will be generated by the Makefile to include appropriate headers, libm-test-driver.c and libm-test-acos.c so tests of each function get run separately). It is no doubt possible to split things up further, so that functions not depending on the type being tested only get compiled once and most of those depending on the type being tested get compiled once per type (rather than separately for variants such as inline / no-inline, and separately for each function being tested after that split), but this rearrangement as-is seems a useful incremental step towards splitting these tests by function. * math/libm-test-driver.c: New file. Based on math/libm-test.inc. * math/libm-test.inc: Move all contents, other than tests of individual functions, to libm-test-driver.c. [!FE_TONEAREST] (FE_TONEAREST): Move to libm-test-driver.c. [!FE_TOWARDZERO] (FE_TOWARDZERO): Likewise. [!FE_UPWARD] (FE_UPWARD): Likewise. [!FE_DOWNWARD] (FE_DOWNWARD): Likewise. (NO_EXCEPTION): Likewise. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ULP_IDX): Likewise. (QTYPE_STR): Likewise. (TEST_COND_binary32): Likewise. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (lit_pi_3_m_4_d): Likewise. (lit_pi_3_m_4_ln10_m_d): Likewise. (lit_pi_2_ln10_m_d): Likewise. (lit_pi_4_ln10_m_d): Likewise. (lit_pi_ln10_d): Likewise. (lit_pi_2_d): Likewise. (lit_pi_4_d): Likewise. (lit_pi): Likewise. (lit_e): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (plus_zero): Likewise. (minus_zero): Likewise. (plus_infty): Likewise. (minus_infty): Likewise. (qnan_value_pl): Likewise. (qnan_value): Likewise. (snan_value_pl): Likewise. (snan_value): Likewise. (max_value): Likewise. (min_value): Likewise. (min_subnorm_value): Likewise. (snan_value_ld): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (struct test_f_f_data): Likewise. (struct test_ff_f_data): Likewise. (struct test_fj_f_data): Likewise. (struct test_fi_f_data): Likewise. (struct test_fl_f_data): Likewise. (struct test_if_f_data): Likewise. (struct test_fff_f_data): Likewise. (struct test_fiu_M_data): Likewise. (struct test_fiu_U_data): Likewise. (struct test_c_f_data): Likewise. (struct test_f_f1_data): Likewise. (struct test_fF_f1_data): Likewise. (struct test_ffI_f1_data): Likewise. (struct test_c_c_data): Likewise. (struct test_cc_c_data): Likewise. (struct test_f_i_data): Likewise. (struct test_ff_i_data): Likewise. (struct test_f_l_data): Likewise. (struct test_f_L_data): Likewise. (struct test_fFF_11_data): Likewise. (struct test_Ff_b1_data): Likewise. (IF_ROUND_INIT_): Likewise. (IF_ROUND_INIT_FE_DOWNWARD): Likewise. (IF_ROUND_INIT_FE_TONEAREST): Likewise. (IF_ROUND_INIT_FE_TOWARDZERO): Likewise. (IF_ROUND_INIT_FE_UPWARD): Likewise. (ROUND_RESTORE_): Likewise. (ROUND_RESTORE_FE_DOWNWARD): Likewise. (ROUND_RESTORE_FE_TONEAREST): Likewise. (ROUND_RESTORE_FE_TOWARDZERO): Likewise. (ROUND_RESTORE_FE_UPWARD): Likewise. (RM_): Likewise. (RM_FE_DOWNWARD): Likewise. (RM_FE_TONEAREST): Likewise. (RM_FE_TOWARDZERO): Likewise. (RM_FE_UPWARD): Likewise. (COMMON_TEST_SETUP): Likewise. (EXTRA_OUTPUT_TEST_SETUP): Likewise. (COMMON_TEST_CLEANUP): Likewise. (EXTRA_OUTPUT_TEST_CLEANUP): Likewise. (RUN_TEST_f_f): Likewise. (RUN_TEST_LOOP_f_f): Likewise. (RUN_TEST_fp_f): Likewise. (RUN_TEST_LOOP_fp_f): Likewise. (RUN_TEST_2_f): Likewise. (RUN_TEST_LOOP_2_f): Likewise. (RUN_TEST_ff_f): Likewise. (RUN_TEST_LOOP_ff_f): Likewise. (RUN_TEST_LOOP_fj_f): Likewise. (RUN_TEST_fi_f): Likewise. (RUN_TEST_LOOP_fi_f): Likewise. (RUN_TEST_fl_f): Likewise. (RUN_TEST_LOOP_fl_f): Likewise. (RUN_TEST_if_f): Likewise. (RUN_TEST_LOOP_if_f): Likewise. (RUN_TEST_fff_f): Likewise. (RUN_TEST_LOOP_fff_f): Likewise. (RUN_TEST_fiu_M): Likewise. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (RUN_TEST_c_f): Likewise. (RUN_TEST_LOOP_c_f): Likewise. (RUN_TEST_f_f1): Likewise. (RUN_TEST_LOOP_f_f1): Likewise. (RUN_TEST_fF_f1): Likewise. (RUN_TEST_LOOP_fF_f1): Likewise. (RUN_TEST_fI_f1): Likewise. (RUN_TEST_LOOP_fI_f1): Likewise. (RUN_TEST_ffI_f1_mod8): Likewise. (RUN_TEST_LOOP_ffI_f1_mod8): Likewise. (RUN_TEST_Ff_b1): Likewise. (RUN_TEST_LOOP_Ff_b1): Likewise. (RUN_TEST_Ffp_b1): Likewise. (RUN_TEST_LOOP_Ffp_b1): Likewise. (RUN_TEST_c_c): Likewise. (RUN_TEST_LOOP_c_c): Likewise. (RUN_TEST_cc_c): Likewise. (RUN_TEST_LOOP_cc_c): Likewise. (RUN_TEST_f_i): Likewise. (RUN_TEST_LOOP_f_i): Likewise. (RUN_TEST_f_i_tg): Likewise. (RUN_TEST_LOOP_f_i_tg): Likewise. (RUN_TEST_ff_b): Likewise. (RUN_TEST_LOOP_ff_b): Likewise. (RUN_TEST_ff_i_tg): Likewise. (RUN_TEST_LOOP_ff_i_tg): Likewise. (RUN_TEST_f_b): Likewise. (RUN_TEST_LOOP_f_b): Likewise. (RUN_TEST_f_b_tg): Likewise. (RUN_TEST_LOOP_f_b_tg): Likewise. (RUN_TEST_f_l): Likewise. (RUN_TEST_LOOP_f_l): Likewise. (RUN_TEST_f_L): Likewise. (RUN_TEST_LOOP_f_L): Likewise. (RUN_TEST_fFF_11): Likewise. (RUN_TEST_LOOP_fFF_11): Likewise. (VEC_SUFF): Likewise. (STR_CONCAT): Likewise. (STR_CON3): Likewise. (HAVE_VECTOR): Likewise. (START): Likewise. (END): Likewise. (END_COMPLEX): Likewise. (ALL_RM_TEST): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Likewise. (parse_opt): Likewise. (argp): Likewise. (check_ulp): Likewise. (main): Likewise. (do_test): New function. Call tests of individual functions previously called from main.
2017-02-07 02:12:16 +08:00
#define RUN_TEST_fiu_M(ARG_STR, FUNC_NAME, ARG1, ARG2, ARG3, \
EXPECTED, EXCEPTIONS) \
do \
if (enable_test (EXCEPTIONS)) \
{ \
COMMON_TEST_SETUP (ARG_STR); \
check_intmax_t (test_name, \
FUNC_TEST (FUNC_NAME) (ARG1, ARG2, ARG3), \
EXPECTED, EXCEPTIONS); \
COMMON_TEST_CLEANUP; \
} \
while (0)
#define RUN_TEST_LOOP_fiu_M(FUNC_NAME, ARRAY, ROUNDING_MODE) \
IF_ROUND_INIT_ ## ROUNDING_MODE \
for (size_t i = 0; i < sizeof (ARRAY) / sizeof (ARRAY)[0]; i++) \
RUN_TEST_fiu_M ((ARRAY)[i].arg_str, FUNC_NAME, (ARRAY)[i].arg1, \
(ARRAY)[i].arg2, (ARRAY)[i].arg3, \
(ARRAY)[i].RM_##ROUNDING_MODE.expected, \
(ARRAY)[i].RM_##ROUNDING_MODE.exceptions); \
ROUND_RESTORE_ ## ROUNDING_MODE
#define RUN_TEST_fiu_U(ARG_STR, FUNC_NAME, ARG1, ARG2, ARG3, \
EXPECTED, EXCEPTIONS) \
do \
if (enable_test (EXCEPTIONS)) \
{ \
COMMON_TEST_SETUP (ARG_STR); \
check_uintmax_t (test_name, \
FUNC_TEST (FUNC_NAME) (ARG1, ARG2, ARG3), \
EXPECTED, EXCEPTIONS); \
COMMON_TEST_CLEANUP; \
} \
while (0)
#define RUN_TEST_LOOP_fiu_U(FUNC_NAME, ARRAY, ROUNDING_MODE) \
IF_ROUND_INIT_ ## ROUNDING_MODE \
for (size_t i = 0; i < sizeof (ARRAY) / sizeof (ARRAY)[0]; i++) \
RUN_TEST_fiu_U ((ARRAY)[i].arg_str, FUNC_NAME, (ARRAY)[i].arg1, \
(ARRAY)[i].arg2, (ARRAY)[i].arg3, \
(ARRAY)[i].RM_##ROUNDING_MODE.expected, \
(ARRAY)[i].RM_##ROUNDING_MODE.exceptions); \
ROUND_RESTORE_ ## ROUNDING_MODE
#define RUN_TEST_c_f(ARG_STR, FUNC_NAME, ARG1, ARG2, EXPECTED, \
EXCEPTIONS) \
do \
if (enable_test (EXCEPTIONS)) \
{ \
COMMON_TEST_SETUP (ARG_STR); \
check_float (test_name, \
FUNC_TEST (FUNC_NAME) (BUILD_COMPLEX (ARG1, ARG2)),\
EXPECTED, EXCEPTIONS); \
COMMON_TEST_CLEANUP; \
} \
while (0)
#define RUN_TEST_LOOP_c_f(FUNC_NAME, ARRAY, ROUNDING_MODE) \
IF_ROUND_INIT_ ## ROUNDING_MODE \
for (size_t i = 0; i < sizeof (ARRAY) / sizeof (ARRAY)[0]; i++) \
RUN_TEST_c_f ((ARRAY)[i].arg_str, FUNC_NAME, (ARRAY)[i].argr, \
(ARRAY)[i].argc, \
(ARRAY)[i].RM_##ROUNDING_MODE.expected, \
(ARRAY)[i].RM_##ROUNDING_MODE.exceptions); \
ROUND_RESTORE_ ## ROUNDING_MODE
#define RUN_TEST_f_f1(ARG_STR, FUNC_NAME, ARG, EXPECTED, \
EXCEPTIONS, EXTRA_VAR, EXTRA_TEST, \
EXTRA_EXPECTED) \
do \
if (enable_test (EXCEPTIONS)) \
{ \
COMMON_TEST_SETUP (ARG_STR); \
(EXTRA_VAR) = (EXTRA_EXPECTED) == 0 ? 1 : 0; \
check_float (test_name, FUNC_TEST (FUNC_NAME) (ARG), EXPECTED, \
EXCEPTIONS); \
EXTRA_OUTPUT_TEST_SETUP (ARG_STR, 1); \
if (EXTRA_TEST) \
check_int (extra1_name, EXTRA_VAR, EXTRA_EXPECTED, 0); \
EXTRA_OUTPUT_TEST_CLEANUP (1); \
COMMON_TEST_CLEANUP; \
} \
while (0)
#define RUN_TEST_LOOP_f_f1(FUNC_NAME, ARRAY, ROUNDING_MODE, EXTRA_VAR) \
IF_ROUND_INIT_ ## ROUNDING_MODE \
for (size_t i = 0; i < sizeof (ARRAY) / sizeof (ARRAY)[0]; i++) \
RUN_TEST_f_f1 ((ARRAY)[i].arg_str, FUNC_NAME, (ARRAY)[i].arg, \
(ARRAY)[i].RM_##ROUNDING_MODE.expected, \
(ARRAY)[i].RM_##ROUNDING_MODE.exceptions, \
EXTRA_VAR, \
(ARRAY)[i].RM_##ROUNDING_MODE.extra_test, \
(ARRAY)[i].RM_##ROUNDING_MODE.extra_expected); \
ROUND_RESTORE_ ## ROUNDING_MODE
#define RUN_TEST_fF_f1(ARG_STR, FUNC_NAME, ARG, EXPECTED, \
EXCEPTIONS, EXTRA_VAR, EXTRA_TEST, \
EXTRA_EXPECTED) \
do \
if (enable_test (EXCEPTIONS)) \
{ \
COMMON_TEST_SETUP (ARG_STR); \
(EXTRA_VAR) = (EXTRA_EXPECTED) == 0 ? 1 : 0; \
check_float (test_name, FUNC_TEST (FUNC_NAME) (ARG, &(EXTRA_VAR)), \
EXPECTED, EXCEPTIONS); \
EXTRA_OUTPUT_TEST_SETUP (ARG_STR, 1); \
if (EXTRA_TEST) \
check_float (extra1_name, EXTRA_VAR, EXTRA_EXPECTED, 0); \
EXTRA_OUTPUT_TEST_CLEANUP (1); \
COMMON_TEST_CLEANUP; \
} \
while (0)
#define RUN_TEST_LOOP_fF_f1(FUNC_NAME, ARRAY, ROUNDING_MODE, EXTRA_VAR) \
IF_ROUND_INIT_ ## ROUNDING_MODE \
for (size_t i = 0; i < sizeof (ARRAY) / sizeof (ARRAY)[0]; i++) \
RUN_TEST_fF_f1 ((ARRAY)[i].arg_str, FUNC_NAME, (ARRAY)[i].arg, \
(ARRAY)[i].RM_##ROUNDING_MODE.expected, \
(ARRAY)[i].RM_##ROUNDING_MODE.exceptions, \
EXTRA_VAR, \
(ARRAY)[i].RM_##ROUNDING_MODE.extra_test, \
(ARRAY)[i].RM_##ROUNDING_MODE.extra_expected); \
ROUND_RESTORE_ ## ROUNDING_MODE
#define RUN_TEST_fI_f1(ARG_STR, FUNC_NAME, ARG, EXPECTED, \
EXCEPTIONS, EXTRA_VAR, EXTRA_TEST, \
EXTRA_EXPECTED) \
do \
if (enable_test (EXCEPTIONS)) \
{ \
COMMON_TEST_SETUP (ARG_STR); \
(EXTRA_VAR) = (EXTRA_EXPECTED) == 0 ? 1 : 0; \
check_float (test_name, FUNC_TEST (FUNC_NAME) (ARG, &(EXTRA_VAR)), \
EXPECTED, EXCEPTIONS); \
EXTRA_OUTPUT_TEST_SETUP (ARG_STR, 1); \
if (EXTRA_TEST) \
check_int (extra1_name, EXTRA_VAR, EXTRA_EXPECTED, 0); \
EXTRA_OUTPUT_TEST_CLEANUP (1); \
COMMON_TEST_CLEANUP; \
} \
while (0)
#define RUN_TEST_LOOP_fI_f1(FUNC_NAME, ARRAY, ROUNDING_MODE, EXTRA_VAR) \
IF_ROUND_INIT_ ## ROUNDING_MODE \
for (size_t i = 0; i < sizeof (ARRAY) / sizeof (ARRAY)[0]; i++) \
RUN_TEST_fI_f1 ((ARRAY)[i].arg_str, FUNC_NAME, (ARRAY)[i].arg, \
(ARRAY)[i].RM_##ROUNDING_MODE.expected, \
(ARRAY)[i].RM_##ROUNDING_MODE.exceptions, \
EXTRA_VAR, \
(ARRAY)[i].RM_##ROUNDING_MODE.extra_test, \
(ARRAY)[i].RM_##ROUNDING_MODE.extra_expected); \
ROUND_RESTORE_ ## ROUNDING_MODE
#define RUN_TEST_ffI_f1_mod8(ARG_STR, FUNC_NAME, ARG1, ARG2, EXPECTED, \
EXCEPTIONS, EXTRA_VAR, EXTRA_TEST, \
EXTRA_EXPECTED) \
do \
if (enable_test (EXCEPTIONS)) \
{ \
COMMON_TEST_SETUP (ARG_STR); \
(EXTRA_VAR) = (EXTRA_EXPECTED) == 0 ? 1 : 0; \
check_float (test_name, \
FUNC_TEST (FUNC_NAME) (ARG1, ARG2, &(EXTRA_VAR)), \
EXPECTED, EXCEPTIONS); \
EXTRA_OUTPUT_TEST_SETUP (ARG_STR, 1); \
if (EXTRA_TEST) \
check_int (extra1_name, (EXTRA_VAR) % 8, EXTRA_EXPECTED, 0); \
EXTRA_OUTPUT_TEST_CLEANUP (1); \
COMMON_TEST_CLEANUP; \
} \
while (0)
#define RUN_TEST_LOOP_ffI_f1_mod8(FUNC_NAME, ARRAY, ROUNDING_MODE, \
EXTRA_VAR) \
IF_ROUND_INIT_ ## ROUNDING_MODE \
for (size_t i = 0; i < sizeof (ARRAY) / sizeof (ARRAY)[0]; i++) \
RUN_TEST_ffI_f1_mod8 ((ARRAY)[i].arg_str, FUNC_NAME, \
(ARRAY)[i].arg1, (ARRAY)[i].arg2, \
(ARRAY)[i].RM_##ROUNDING_MODE.expected, \
(ARRAY)[i].RM_##ROUNDING_MODE.exceptions, \
EXTRA_VAR, \
(ARRAY)[i].RM_##ROUNDING_MODE.extra_test, \
(ARRAY)[i].RM_##ROUNDING_MODE.extra_expected); \
ROUND_RESTORE_ ## ROUNDING_MODE
#define RUN_TEST_Ff_b1(ARG_STR, FUNC_NAME, ARG, EXPECTED, \
EXCEPTIONS, EXTRA_VAR, EXTRA_TEST, \
EXTRA_EXPECTED) \
do \
if (enable_test (EXCEPTIONS)) \
{ \
COMMON_TEST_SETUP (ARG_STR); \
(EXTRA_VAR) = (EXTRA_EXPECTED) == 0 ? 1 : 0; \
/* Clear any exceptions from comparison involving sNaN \
EXTRA_EXPECTED. */ \
feclearexcept (FE_ALL_EXCEPT); \
check_bool (test_name, FUNC_TEST (FUNC_NAME) (&(EXTRA_VAR), \
(ARG)), \
EXPECTED, EXCEPTIONS); \
EXTRA_OUTPUT_TEST_SETUP (ARG_STR, 1); \
if (EXTRA_TEST) \
check_float (extra1_name, EXTRA_VAR, EXTRA_EXPECTED, \
(EXCEPTIONS) & TEST_NAN_PAYLOAD); \
EXTRA_OUTPUT_TEST_CLEANUP (1); \
COMMON_TEST_CLEANUP; \
} \
while (0)
#define RUN_TEST_LOOP_Ff_b1(FUNC_NAME, ARRAY, ROUNDING_MODE, \
EXTRA_VAR) \
IF_ROUND_INIT_ ## ROUNDING_MODE \
for (size_t i = 0; i < sizeof (ARRAY) / sizeof (ARRAY)[0]; i++) \
RUN_TEST_Ff_b1 ((ARRAY)[i].arg_str, FUNC_NAME, (ARRAY)[i].arg, \
(ARRAY)[i].RM_##ROUNDING_MODE.expected, \
(ARRAY)[i].RM_##ROUNDING_MODE.exceptions, \
EXTRA_VAR, \
(ARRAY)[i].RM_##ROUNDING_MODE.extra_test, \
(ARRAY)[i].RM_##ROUNDING_MODE.extra_expected); \
ROUND_RESTORE_ ## ROUNDING_MODE
#define RUN_TEST_Ffp_b1(ARG_STR, FUNC_NAME, ARG, EXPECTED, \
EXCEPTIONS, EXTRA_VAR, EXTRA_TEST, \
EXTRA_EXPECTED) \
do \
if (enable_test (EXCEPTIONS)) \
{ \
COMMON_TEST_SETUP (ARG_STR); \
(EXTRA_VAR) = (EXTRA_EXPECTED) == 0 ? 1 : 0; \
check_bool (test_name, FUNC_TEST (FUNC_NAME) (&(EXTRA_VAR), \
&(ARG)), \
EXPECTED, EXCEPTIONS); \
EXTRA_OUTPUT_TEST_SETUP (ARG_STR, 1); \
if (EXTRA_TEST) \
check_float (extra1_name, EXTRA_VAR, EXTRA_EXPECTED, \
(EXCEPTIONS) & TEST_NAN_PAYLOAD); \
EXTRA_OUTPUT_TEST_CLEANUP (1); \
COMMON_TEST_CLEANUP; \
} \
while (0)
#define RUN_TEST_LOOP_Ffp_b1(FUNC_NAME, ARRAY, ROUNDING_MODE, \
EXTRA_VAR) \
IF_ROUND_INIT_ ## ROUNDING_MODE \
for (size_t i = 0; i < sizeof (ARRAY) / sizeof (ARRAY)[0]; i++) \
RUN_TEST_Ffp_b1 ((ARRAY)[i].arg_str, FUNC_NAME, (ARRAY)[i].arg, \
(ARRAY)[i].RM_##ROUNDING_MODE.expected, \
(ARRAY)[i].RM_##ROUNDING_MODE.exceptions, \
EXTRA_VAR, \
(ARRAY)[i].RM_##ROUNDING_MODE.extra_test, \
(ARRAY)[i].RM_##ROUNDING_MODE.extra_expected); \
ROUND_RESTORE_ ## ROUNDING_MODE
#define RUN_TEST_c_c(ARG_STR, FUNC_NAME, ARGR, ARGC, EXPR, EXPC, \
EXCEPTIONS) \
do \
if (enable_test (EXCEPTIONS)) \
{ \
COMMON_TEST_SETUP (ARG_STR); \
check_complex (test_name, \
FUNC_TEST (FUNC_NAME) (BUILD_COMPLEX (ARGR, ARGC)), \
BUILD_COMPLEX (EXPR, EXPC), EXCEPTIONS); \
COMMON_TEST_CLEANUP; \
} \
while (0)
#define RUN_TEST_LOOP_c_c(FUNC_NAME, ARRAY, ROUNDING_MODE) \
IF_ROUND_INIT_ ## ROUNDING_MODE \
for (size_t i = 0; i < sizeof (ARRAY) / sizeof (ARRAY)[0]; i++) \
RUN_TEST_c_c ((ARRAY)[i].arg_str, FUNC_NAME, (ARRAY)[i].argr, \
(ARRAY)[i].argc, \
(ARRAY)[i].RM_##ROUNDING_MODE.expr, \
(ARRAY)[i].RM_##ROUNDING_MODE.expc, \
(ARRAY)[i].RM_##ROUNDING_MODE.exceptions); \
ROUND_RESTORE_ ## ROUNDING_MODE
#define RUN_TEST_cc_c(ARG_STR, FUNC_NAME, ARG1R, ARG1C, ARG2R, ARG2C, \
EXPR, EXPC, EXCEPTIONS) \
do \
if (enable_test (EXCEPTIONS)) \
{ \
COMMON_TEST_SETUP (ARG_STR); \
check_complex (test_name, \
FUNC_TEST (FUNC_NAME) (BUILD_COMPLEX (ARG1R, ARG1C), \
BUILD_COMPLEX (ARG2R, ARG2C)), \
BUILD_COMPLEX (EXPR, EXPC), EXCEPTIONS); \
COMMON_TEST_CLEANUP; \
} \
while (0)
#define RUN_TEST_LOOP_cc_c(FUNC_NAME, ARRAY, ROUNDING_MODE) \
IF_ROUND_INIT_ ## ROUNDING_MODE \
for (size_t i = 0; i < sizeof (ARRAY) / sizeof (ARRAY)[0]; i++) \
RUN_TEST_cc_c ((ARRAY)[i].arg_str, FUNC_NAME, (ARRAY)[i].arg1r, \
(ARRAY)[i].arg1c, (ARRAY)[i].arg2r, \
(ARRAY)[i].arg2c, \
(ARRAY)[i].RM_##ROUNDING_MODE.expr, \
(ARRAY)[i].RM_##ROUNDING_MODE.expc, \
(ARRAY)[i].RM_##ROUNDING_MODE.exceptions); \
ROUND_RESTORE_ ## ROUNDING_MODE
#define RUN_TEST_f_i(ARG_STR, FUNC_NAME, ARG, EXPECTED, EXCEPTIONS) \
do \
if (enable_test (EXCEPTIONS)) \
{ \
COMMON_TEST_SETUP (ARG_STR); \
check_int (test_name, FUNC_TEST (FUNC_NAME) (ARG), EXPECTED, \
EXCEPTIONS); \
COMMON_TEST_CLEANUP; \
} \
while (0)
#define RUN_TEST_LOOP_f_i(FUNC_NAME, ARRAY, ROUNDING_MODE) \
IF_ROUND_INIT_ ## ROUNDING_MODE \
for (size_t i = 0; i < sizeof (ARRAY) / sizeof (ARRAY)[0]; i++) \
RUN_TEST_f_i ((ARRAY)[i].arg_str, FUNC_NAME, (ARRAY)[i].arg, \
(ARRAY)[i].RM_##ROUNDING_MODE.expected, \
(ARRAY)[i].RM_##ROUNDING_MODE.exceptions); \
ROUND_RESTORE_ ## ROUNDING_MODE
#define RUN_TEST_f_i_tg(ARG_STR, FUNC_NAME, ARG, EXPECTED, \
EXCEPTIONS) \
do \
if (enable_test (EXCEPTIONS)) \
{ \
COMMON_TEST_SETUP (ARG_STR); \
check_int (test_name, FUNC_NAME (ARG), EXPECTED, EXCEPTIONS); \
COMMON_TEST_CLEANUP; \
} \
while (0)
#define RUN_TEST_LOOP_f_i_tg(FUNC_NAME, ARRAY, ROUNDING_MODE) \
IF_ROUND_INIT_ ## ROUNDING_MODE \
for (size_t i = 0; i < sizeof (ARRAY) / sizeof (ARRAY)[0]; i++) \
RUN_TEST_f_i_tg ((ARRAY)[i].arg_str, FUNC_NAME, (ARRAY)[i].arg, \
(ARRAY)[i].RM_##ROUNDING_MODE.expected, \
(ARRAY)[i].RM_##ROUNDING_MODE.exceptions); \
ROUND_RESTORE_ ## ROUNDING_MODE
#define RUN_TEST_LOOP_j_b_tg_u(FUNC_NAME, ARRAY, ROUNDING_MODE) \
IF_ROUND_INIT_ ## ROUNDING_MODE \
for (size_t i = 0; i < sizeof (ARRAY) / sizeof (ARRAY)[0]; i++) \
RUN_TEST_f_b_tg ((ARRAY)[i].arg_str, FUNC_NAME, \
(FLOAT)(ARRAY)[i].arg.value, \
(ARRAY)[i].RM_##ROUNDING_MODE.expected, \
(ARRAY)[i].RM_##ROUNDING_MODE.exceptions); \
ROUND_RESTORE_ ## ROUNDING_MODE
#define RUN_TEST_LOOP_j_i_tg_u(FUNC_NAME, ARRAY, ROUNDING_MODE) \
IF_ROUND_INIT_ ## ROUNDING_MODE \
for (size_t i = 0; i < sizeof (ARRAY) / sizeof (ARRAY)[0]; i++) \
RUN_TEST_f_i_tg ((ARRAY)[i].arg_str, FUNC_NAME, \
(FLOAT)(ARRAY)[i].arg.value, \
(ARRAY)[i].RM_##ROUNDING_MODE.expected, \
(ARRAY)[i].RM_##ROUNDING_MODE.exceptions); \
ROUND_RESTORE_ ## ROUNDING_MODE
Move non-function-specific parts of libm-test.inc to separate file. libm-test.inc contains both test infrastructure and tests of individual functions. This patch moves the infrastructure to a separate file libm-test-driver.c. This is in preparation for splitting the tests of individual functions into separate source files, which will be processed individually by gen-libm-test.pl (so e.g. libm-test-acos.inc and auto-libm-test-out-acos will be processed by gen-libm-test.pl to produce libm-test-acos.c, and files such as test-double-acos.c will be generated by the Makefile to include appropriate headers, libm-test-driver.c and libm-test-acos.c so tests of each function get run separately). It is no doubt possible to split things up further, so that functions not depending on the type being tested only get compiled once and most of those depending on the type being tested get compiled once per type (rather than separately for variants such as inline / no-inline, and separately for each function being tested after that split), but this rearrangement as-is seems a useful incremental step towards splitting these tests by function. * math/libm-test-driver.c: New file. Based on math/libm-test.inc. * math/libm-test.inc: Move all contents, other than tests of individual functions, to libm-test-driver.c. [!FE_TONEAREST] (FE_TONEAREST): Move to libm-test-driver.c. [!FE_TOWARDZERO] (FE_TOWARDZERO): Likewise. [!FE_UPWARD] (FE_UPWARD): Likewise. [!FE_DOWNWARD] (FE_DOWNWARD): Likewise. (NO_EXCEPTION): Likewise. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ULP_IDX): Likewise. (QTYPE_STR): Likewise. (TEST_COND_binary32): Likewise. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (lit_pi_3_m_4_d): Likewise. (lit_pi_3_m_4_ln10_m_d): Likewise. (lit_pi_2_ln10_m_d): Likewise. (lit_pi_4_ln10_m_d): Likewise. (lit_pi_ln10_d): Likewise. (lit_pi_2_d): Likewise. (lit_pi_4_d): Likewise. (lit_pi): Likewise. (lit_e): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (plus_zero): Likewise. (minus_zero): Likewise. (plus_infty): Likewise. (minus_infty): Likewise. (qnan_value_pl): Likewise. (qnan_value): Likewise. (snan_value_pl): Likewise. (snan_value): Likewise. (max_value): Likewise. (min_value): Likewise. (min_subnorm_value): Likewise. (snan_value_ld): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (struct test_f_f_data): Likewise. (struct test_ff_f_data): Likewise. (struct test_fj_f_data): Likewise. (struct test_fi_f_data): Likewise. (struct test_fl_f_data): Likewise. (struct test_if_f_data): Likewise. (struct test_fff_f_data): Likewise. (struct test_fiu_M_data): Likewise. (struct test_fiu_U_data): Likewise. (struct test_c_f_data): Likewise. (struct test_f_f1_data): Likewise. (struct test_fF_f1_data): Likewise. (struct test_ffI_f1_data): Likewise. (struct test_c_c_data): Likewise. (struct test_cc_c_data): Likewise. (struct test_f_i_data): Likewise. (struct test_ff_i_data): Likewise. (struct test_f_l_data): Likewise. (struct test_f_L_data): Likewise. (struct test_fFF_11_data): Likewise. (struct test_Ff_b1_data): Likewise. (IF_ROUND_INIT_): Likewise. (IF_ROUND_INIT_FE_DOWNWARD): Likewise. (IF_ROUND_INIT_FE_TONEAREST): Likewise. (IF_ROUND_INIT_FE_TOWARDZERO): Likewise. (IF_ROUND_INIT_FE_UPWARD): Likewise. (ROUND_RESTORE_): Likewise. (ROUND_RESTORE_FE_DOWNWARD): Likewise. (ROUND_RESTORE_FE_TONEAREST): Likewise. (ROUND_RESTORE_FE_TOWARDZERO): Likewise. (ROUND_RESTORE_FE_UPWARD): Likewise. (RM_): Likewise. (RM_FE_DOWNWARD): Likewise. (RM_FE_TONEAREST): Likewise. (RM_FE_TOWARDZERO): Likewise. (RM_FE_UPWARD): Likewise. (COMMON_TEST_SETUP): Likewise. (EXTRA_OUTPUT_TEST_SETUP): Likewise. (COMMON_TEST_CLEANUP): Likewise. (EXTRA_OUTPUT_TEST_CLEANUP): Likewise. (RUN_TEST_f_f): Likewise. (RUN_TEST_LOOP_f_f): Likewise. (RUN_TEST_fp_f): Likewise. (RUN_TEST_LOOP_fp_f): Likewise. (RUN_TEST_2_f): Likewise. (RUN_TEST_LOOP_2_f): Likewise. (RUN_TEST_ff_f): Likewise. (RUN_TEST_LOOP_ff_f): Likewise. (RUN_TEST_LOOP_fj_f): Likewise. (RUN_TEST_fi_f): Likewise. (RUN_TEST_LOOP_fi_f): Likewise. (RUN_TEST_fl_f): Likewise. (RUN_TEST_LOOP_fl_f): Likewise. (RUN_TEST_if_f): Likewise. (RUN_TEST_LOOP_if_f): Likewise. (RUN_TEST_fff_f): Likewise. (RUN_TEST_LOOP_fff_f): Likewise. (RUN_TEST_fiu_M): Likewise. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (RUN_TEST_c_f): Likewise. (RUN_TEST_LOOP_c_f): Likewise. (RUN_TEST_f_f1): Likewise. (RUN_TEST_LOOP_f_f1): Likewise. (RUN_TEST_fF_f1): Likewise. (RUN_TEST_LOOP_fF_f1): Likewise. (RUN_TEST_fI_f1): Likewise. (RUN_TEST_LOOP_fI_f1): Likewise. (RUN_TEST_ffI_f1_mod8): Likewise. (RUN_TEST_LOOP_ffI_f1_mod8): Likewise. (RUN_TEST_Ff_b1): Likewise. (RUN_TEST_LOOP_Ff_b1): Likewise. (RUN_TEST_Ffp_b1): Likewise. (RUN_TEST_LOOP_Ffp_b1): Likewise. (RUN_TEST_c_c): Likewise. (RUN_TEST_LOOP_c_c): Likewise. (RUN_TEST_cc_c): Likewise. (RUN_TEST_LOOP_cc_c): Likewise. (RUN_TEST_f_i): Likewise. (RUN_TEST_LOOP_f_i): Likewise. (RUN_TEST_f_i_tg): Likewise. (RUN_TEST_LOOP_f_i_tg): Likewise. (RUN_TEST_ff_b): Likewise. (RUN_TEST_LOOP_ff_b): Likewise. (RUN_TEST_ff_i_tg): Likewise. (RUN_TEST_LOOP_ff_i_tg): Likewise. (RUN_TEST_f_b): Likewise. (RUN_TEST_LOOP_f_b): Likewise. (RUN_TEST_f_b_tg): Likewise. (RUN_TEST_LOOP_f_b_tg): Likewise. (RUN_TEST_f_l): Likewise. (RUN_TEST_LOOP_f_l): Likewise. (RUN_TEST_f_L): Likewise. (RUN_TEST_LOOP_f_L): Likewise. (RUN_TEST_fFF_11): Likewise. (RUN_TEST_LOOP_fFF_11): Likewise. (VEC_SUFF): Likewise. (STR_CONCAT): Likewise. (STR_CON3): Likewise. (HAVE_VECTOR): Likewise. (START): Likewise. (END): Likewise. (END_COMPLEX): Likewise. (ALL_RM_TEST): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Likewise. (parse_opt): Likewise. (argp): Likewise. (check_ulp): Likewise. (main): Likewise. (do_test): New function. Call tests of individual functions previously called from main.
2017-02-07 02:12:16 +08:00
#define RUN_TEST_ff_b(ARG_STR, FUNC_NAME, ARG1, ARG2, EXPECTED, \
EXCEPTIONS) \
do \
if (enable_test (EXCEPTIONS)) \
{ \
COMMON_TEST_SETUP (ARG_STR); \
check_bool (test_name, FUNC_TEST (FUNC_NAME) (ARG1, ARG2), \
EXPECTED, EXCEPTIONS); \
COMMON_TEST_CLEANUP; \
} \
while (0)
#define RUN_TEST_LOOP_ff_b(FUNC_NAME, ARRAY, ROUNDING_MODE) \
IF_ROUND_INIT_ ## ROUNDING_MODE \
for (size_t i = 0; i < sizeof (ARRAY) / sizeof (ARRAY)[0]; i++) \
RUN_TEST_ff_b ((ARRAY)[i].arg_str, FUNC_NAME, \
(ARRAY)[i].arg1, (ARRAY)[i].arg2, \
(ARRAY)[i].RM_##ROUNDING_MODE.expected, \
(ARRAY)[i].RM_##ROUNDING_MODE.exceptions); \
ROUND_RESTORE_ ## ROUNDING_MODE
Make totalorder and totalordermag functions take pointer arguments. The resolution of C floating-point Clarification Request 25 <http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2397.htm#dr_25> is that the totalorder and totalordermag functions should take pointer arguments, and this has been adopted in C2X (with const added; note that the integration of this change into C2X is present in the C standard git repository but postdates the most recent public PDF draft). This patch updates glibc accordingly. As a defect resolution, the API is changed unconditionally rather than supporting any sort of TS 18661-1 mode for compilation with the old version of the API. There are compat symbols for existing binaries that pass floating-point arguments directly. As a consequence of changing to pointer arguments, there are no longer type-generic macros in tgmath.h for these functions. Because of the fairly complicated logic for creating libm function aliases and determining the set of aliases to create in a given glibc configuration, rather than duplicating all that in individual source files to create the versioned and compat symbols, the source files for the various versions of totalorder functions are set up to redefine weak_alias before using libm_alias_* macros to create the symbols required. In turn, this requires creating a separate alias for each symbol version pointing to the same implementation (see binutils bug <https://sourceware.org/bugzilla/show_bug.cgi?id=23840>), which is done automatically using __COUNTER__. (As I noted in <https://sourceware.org/ml/libc-alpha/2018-10/msg00631.html>, it might well make sense for glibc's symbol versioning macros to do that alias creation with __COUNTER__ themselves, which would somewhat simplify the logic in the totalorder source files.) It is of course desirable to test the compat symbols. I did this with the generic libm-test machinery, but didn't wish to duplicate the actual tables of test inputs and outputs, and thought it risky to attempt to have a single object file refer to both default and compat versions of the same function in order to test them together. Thus, I created libm-test-compat_totalorder.inc and libm-test-compat_totalordermag.inc which include the generated .c files (with the processed version of those tables of inputs) from the non-compat tests, and added appropriate dependencies. I think this provides sufficient test coverage for the compat symbols without also needing to make the special ldbl-96 and ldbl-128ibm tests (of peculiarities relating to the representations of those formats that can't be covered in the generic tests) run for the compat symbols. Tests of compat symbols need to be internal tests, meaning _ISOMAC is not defined. Making some libm-test tests into internal tests showed up two other issues. GCC diagnoses duplicate macro definitions of __STDC_* macros, including __STDC_WANT_IEC_60559_TYPES_EXT__; I added an appropriate conditional and filed <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=91451> for this issue. On ia64, include/setjmp.h ends up getting included indirectly from libm-symbols.h, resulting in conflicting definitions of the STR macro (also defined in libm-test-driver.c); I renamed the macros in include/setjmp.h. (It's arguable that we should have common internal headers used everywhere for stringizing and concatenation macros.) Tested for x86_64 and x86, and with build-many-glibcs.py. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN] (totalorder): Take pointer arguments. [__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN] (totalordermag): Likewise. * manual/arith.texi (totalorder): Likewise. (totalorderf): Likewise. (totalorderl): Likewise. (totalorderfN): Likewise. (totalorderfNx): Likewise. (totalordermag): Likewise. (totalordermagf): Likewise. (totalordermagl): Likewise. (totalordermagfN): Likewise. (totalordermagfNx): Likewise. * math/tgmath.h (__TGMATH_BINARY_REAL_RET_ONLY): Remove macro. [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag): Likewise. * math/Versions (GLIBC_2.31): Add totalorder, totalorderf, totalorderl, totalordermag, totalordermagf, totalordermagl, totalorderf32, totalorderf64, totalorderf32x, totalordermagf32, totalordermagf64, totalordermagf32x, totalorderf64x, totalordermagf64x, totalorderf128 and totalordermagf128. * math/Makefile (libm-test-funcs-noauto): Add compat_totalorder and compat_totalordermag. (libm-test-funcs-compat): New variable. (libm-tests-compat): Likewise. (tests): Do not include compat tests. (tests-internal): Add compat tests. ($(foreach t,$(libm-tests-base), $(objpfx)$(t)-compat_totalorder.o)): Depend on $(objpfx)libm-test-totalorder.c. ($(foreach t,$(libm-tests-base), $(objpfx)$(t)-compat_totalordermag.o): Depend on $(objpfx)libm-test-totalordermag.c. (tgmath3-macros): Remove totalorder and totalordermag. * math/libm-test-compat_totalorder.inc: New file. * math/libm-test-compat_totalordermag.inc: Likewise. * math/libm-test-driver.c (struct test_ff_i_data): Update comment. (RUN_TEST_fpfp_b): New macro. (RUN_TEST_LOOP_fpfp_b): Likewise. * math/libm-test-totalorder.inc (totalorder_test_data): Use TEST_fpfp_b. (totalorder_test): Condition on [!COMPAT_TEST]. (do_test): Likewise. * math/libm-test-totalordermag.inc (totalordermag_test_data): Use TEST_fpfp_b. (totalordermag_test): Condition on [!COMPAT_TEST]. (do_test): Likewise. * math/gen-tgmath-tests.py (Tests.add_all_tests): Remove totalorder and totalordermag. * math/test-tgmath.c (NCALLS): Change to 132. (F(compile_test)): Do not call totalorder or totalordermag. (F(totalorder)): Remove. (F(totalordermag)): Likewise. * include/float.h (__STDC_WANT_IEC_60559_TYPES_EXT__): Do not define if [__STDC_WANT_IEC_60559_TYPES_EXT__]. * include/setjmp.h [!_ISOMAC] (STR_HELPER): Rename to SJSTR_HELPER. [!_ISOMAC] (STR): Rename to SJSTR. Update call to STR_HELPER. [!_ISOMAC] (TEST_SIZE): Update call to STR. [!_ISOMAC] (TEST_ALIGN): Likewise. [!_ISOMAC] (TEST_OFFSET): Likewise. * sysdeps/ieee754/dbl-64/s_totalorder.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorder): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/dbl-64/s_totalordermag.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermag): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorder): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermag): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/float128/float128_private.h (__totalorder_compatl): New macro. (__totalordermag_compatl): Likewise. * sysdeps/ieee754/flt-32/s_totalorderf.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorderf): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/flt-32/s_totalordermagf.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermagf): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128/s_totalorderl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorderl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128/s_totalordermagl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermagl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Include <shlib-compat.h>. (__totalorderl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c: Include <shlib-compat.h>. (__totalordermagl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-96/s_totalorderl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorderl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-96/s_totalordermagl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermagl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c (totalorderl): Take pointer arguments. * sysdeps/ieee754/ldbl-opt/nldbl-totalordermag.c (totalordermagl): Likewise. * sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c (do_test): Update calls to totalorderl and totalordermagl. * sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c (do_test): Update calls to totalorderl and totalordermagl. * sysdeps/mach/hurd/i386/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/csky/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2019-08-15 23:18:34 +08:00
#define RUN_TEST_fpfp_b(ARG_STR, FUNC_NAME, ARG1, ARG2, EXPECTED, \
EXCEPTIONS) \
do \
if (enable_test (EXCEPTIONS)) \
{ \
COMMON_TEST_SETUP (ARG_STR); \
check_bool (test_name, \
FUNC_TEST (FUNC_NAME) (&(ARG1), &(ARG2)), \
EXPECTED, EXCEPTIONS); \
COMMON_TEST_CLEANUP; \
} \
while (0)
#define RUN_TEST_LOOP_fpfp_b(FUNC_NAME, ARRAY, ROUNDING_MODE) \
IF_ROUND_INIT_ ## ROUNDING_MODE \
for (size_t i = 0; i < sizeof (ARRAY) / sizeof (ARRAY)[0]; i++) \
RUN_TEST_fpfp_b ((ARRAY)[i].arg_str, FUNC_NAME, \
(ARRAY)[i].arg1, (ARRAY)[i].arg2, \
(ARRAY)[i].RM_##ROUNDING_MODE.expected, \
(ARRAY)[i].RM_##ROUNDING_MODE.exceptions); \
ROUND_RESTORE_ ## ROUNDING_MODE
Move non-function-specific parts of libm-test.inc to separate file. libm-test.inc contains both test infrastructure and tests of individual functions. This patch moves the infrastructure to a separate file libm-test-driver.c. This is in preparation for splitting the tests of individual functions into separate source files, which will be processed individually by gen-libm-test.pl (so e.g. libm-test-acos.inc and auto-libm-test-out-acos will be processed by gen-libm-test.pl to produce libm-test-acos.c, and files such as test-double-acos.c will be generated by the Makefile to include appropriate headers, libm-test-driver.c and libm-test-acos.c so tests of each function get run separately). It is no doubt possible to split things up further, so that functions not depending on the type being tested only get compiled once and most of those depending on the type being tested get compiled once per type (rather than separately for variants such as inline / no-inline, and separately for each function being tested after that split), but this rearrangement as-is seems a useful incremental step towards splitting these tests by function. * math/libm-test-driver.c: New file. Based on math/libm-test.inc. * math/libm-test.inc: Move all contents, other than tests of individual functions, to libm-test-driver.c. [!FE_TONEAREST] (FE_TONEAREST): Move to libm-test-driver.c. [!FE_TOWARDZERO] (FE_TOWARDZERO): Likewise. [!FE_UPWARD] (FE_UPWARD): Likewise. [!FE_DOWNWARD] (FE_DOWNWARD): Likewise. (NO_EXCEPTION): Likewise. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ULP_IDX): Likewise. (QTYPE_STR): Likewise. (TEST_COND_binary32): Likewise. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (lit_pi_3_m_4_d): Likewise. (lit_pi_3_m_4_ln10_m_d): Likewise. (lit_pi_2_ln10_m_d): Likewise. (lit_pi_4_ln10_m_d): Likewise. (lit_pi_ln10_d): Likewise. (lit_pi_2_d): Likewise. (lit_pi_4_d): Likewise. (lit_pi): Likewise. (lit_e): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (plus_zero): Likewise. (minus_zero): Likewise. (plus_infty): Likewise. (minus_infty): Likewise. (qnan_value_pl): Likewise. (qnan_value): Likewise. (snan_value_pl): Likewise. (snan_value): Likewise. (max_value): Likewise. (min_value): Likewise. (min_subnorm_value): Likewise. (snan_value_ld): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (struct test_f_f_data): Likewise. (struct test_ff_f_data): Likewise. (struct test_fj_f_data): Likewise. (struct test_fi_f_data): Likewise. (struct test_fl_f_data): Likewise. (struct test_if_f_data): Likewise. (struct test_fff_f_data): Likewise. (struct test_fiu_M_data): Likewise. (struct test_fiu_U_data): Likewise. (struct test_c_f_data): Likewise. (struct test_f_f1_data): Likewise. (struct test_fF_f1_data): Likewise. (struct test_ffI_f1_data): Likewise. (struct test_c_c_data): Likewise. (struct test_cc_c_data): Likewise. (struct test_f_i_data): Likewise. (struct test_ff_i_data): Likewise. (struct test_f_l_data): Likewise. (struct test_f_L_data): Likewise. (struct test_fFF_11_data): Likewise. (struct test_Ff_b1_data): Likewise. (IF_ROUND_INIT_): Likewise. (IF_ROUND_INIT_FE_DOWNWARD): Likewise. (IF_ROUND_INIT_FE_TONEAREST): Likewise. (IF_ROUND_INIT_FE_TOWARDZERO): Likewise. (IF_ROUND_INIT_FE_UPWARD): Likewise. (ROUND_RESTORE_): Likewise. (ROUND_RESTORE_FE_DOWNWARD): Likewise. (ROUND_RESTORE_FE_TONEAREST): Likewise. (ROUND_RESTORE_FE_TOWARDZERO): Likewise. (ROUND_RESTORE_FE_UPWARD): Likewise. (RM_): Likewise. (RM_FE_DOWNWARD): Likewise. (RM_FE_TONEAREST): Likewise. (RM_FE_TOWARDZERO): Likewise. (RM_FE_UPWARD): Likewise. (COMMON_TEST_SETUP): Likewise. (EXTRA_OUTPUT_TEST_SETUP): Likewise. (COMMON_TEST_CLEANUP): Likewise. (EXTRA_OUTPUT_TEST_CLEANUP): Likewise. (RUN_TEST_f_f): Likewise. (RUN_TEST_LOOP_f_f): Likewise. (RUN_TEST_fp_f): Likewise. (RUN_TEST_LOOP_fp_f): Likewise. (RUN_TEST_2_f): Likewise. (RUN_TEST_LOOP_2_f): Likewise. (RUN_TEST_ff_f): Likewise. (RUN_TEST_LOOP_ff_f): Likewise. (RUN_TEST_LOOP_fj_f): Likewise. (RUN_TEST_fi_f): Likewise. (RUN_TEST_LOOP_fi_f): Likewise. (RUN_TEST_fl_f): Likewise. (RUN_TEST_LOOP_fl_f): Likewise. (RUN_TEST_if_f): Likewise. (RUN_TEST_LOOP_if_f): Likewise. (RUN_TEST_fff_f): Likewise. (RUN_TEST_LOOP_fff_f): Likewise. (RUN_TEST_fiu_M): Likewise. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (RUN_TEST_c_f): Likewise. (RUN_TEST_LOOP_c_f): Likewise. (RUN_TEST_f_f1): Likewise. (RUN_TEST_LOOP_f_f1): Likewise. (RUN_TEST_fF_f1): Likewise. (RUN_TEST_LOOP_fF_f1): Likewise. (RUN_TEST_fI_f1): Likewise. (RUN_TEST_LOOP_fI_f1): Likewise. (RUN_TEST_ffI_f1_mod8): Likewise. (RUN_TEST_LOOP_ffI_f1_mod8): Likewise. (RUN_TEST_Ff_b1): Likewise. (RUN_TEST_LOOP_Ff_b1): Likewise. (RUN_TEST_Ffp_b1): Likewise. (RUN_TEST_LOOP_Ffp_b1): Likewise. (RUN_TEST_c_c): Likewise. (RUN_TEST_LOOP_c_c): Likewise. (RUN_TEST_cc_c): Likewise. (RUN_TEST_LOOP_cc_c): Likewise. (RUN_TEST_f_i): Likewise. (RUN_TEST_LOOP_f_i): Likewise. (RUN_TEST_f_i_tg): Likewise. (RUN_TEST_LOOP_f_i_tg): Likewise. (RUN_TEST_ff_b): Likewise. (RUN_TEST_LOOP_ff_b): Likewise. (RUN_TEST_ff_i_tg): Likewise. (RUN_TEST_LOOP_ff_i_tg): Likewise. (RUN_TEST_f_b): Likewise. (RUN_TEST_LOOP_f_b): Likewise. (RUN_TEST_f_b_tg): Likewise. (RUN_TEST_LOOP_f_b_tg): Likewise. (RUN_TEST_f_l): Likewise. (RUN_TEST_LOOP_f_l): Likewise. (RUN_TEST_f_L): Likewise. (RUN_TEST_LOOP_f_L): Likewise. (RUN_TEST_fFF_11): Likewise. (RUN_TEST_LOOP_fFF_11): Likewise. (VEC_SUFF): Likewise. (STR_CONCAT): Likewise. (STR_CON3): Likewise. (HAVE_VECTOR): Likewise. (START): Likewise. (END): Likewise. (END_COMPLEX): Likewise. (ALL_RM_TEST): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Likewise. (parse_opt): Likewise. (argp): Likewise. (check_ulp): Likewise. (main): Likewise. (do_test): New function. Call tests of individual functions previously called from main.
2017-02-07 02:12:16 +08:00
#define RUN_TEST_ff_i_tg(ARG_STR, FUNC_NAME, ARG1, ARG2, EXPECTED, \
EXCEPTIONS) \
do \
if (enable_test (EXCEPTIONS)) \
{ \
COMMON_TEST_SETUP (ARG_STR); \
check_int (test_name, FUNC_NAME (ARG1, ARG2), EXPECTED, \
EXCEPTIONS); \
COMMON_TEST_CLEANUP; \
} \
while (0)
#define RUN_TEST_LOOP_ff_i_tg(FUNC_NAME, ARRAY, ROUNDING_MODE) \
IF_ROUND_INIT_ ## ROUNDING_MODE \
for (size_t i = 0; i < sizeof (ARRAY) / sizeof (ARRAY)[0]; i++) \
RUN_TEST_ff_i_tg ((ARRAY)[i].arg_str, FUNC_NAME, \
(ARRAY)[i].arg1, (ARRAY)[i].arg2, \
(ARRAY)[i].RM_##ROUNDING_MODE.expected, \
(ARRAY)[i].RM_##ROUNDING_MODE.exceptions); \
ROUND_RESTORE_ ## ROUNDING_MODE
#define RUN_TEST_f_b(ARG_STR, FUNC_NAME, ARG, EXPECTED, EXCEPTIONS) \
do \
if (enable_test (EXCEPTIONS)) \
{ \
COMMON_TEST_SETUP (ARG_STR); \
check_bool (test_name, FUNC_TEST (FUNC_NAME) (ARG), EXPECTED, \
EXCEPTIONS); \
COMMON_TEST_CLEANUP; \
} \
while (0)
#define RUN_TEST_LOOP_f_b(FUNC_NAME, ARRAY, ROUNDING_MODE) \
IF_ROUND_INIT_ ## ROUNDING_MODE \
for (size_t i = 0; i < sizeof (ARRAY) / sizeof (ARRAY)[0]; i++) \
RUN_TEST_f_b ((ARRAY)[i].arg_str, FUNC_NAME, (ARRAY)[i].arg, \
(ARRAY)[i].RM_##ROUNDING_MODE.expected, \
(ARRAY)[i].RM_##ROUNDING_MODE.exceptions); \
ROUND_RESTORE_ ## ROUNDING_MODE
#define RUN_TEST_f_b_tg(ARG_STR, FUNC_NAME, ARG, EXPECTED, \
EXCEPTIONS) \
do \
if (enable_test (EXCEPTIONS)) \
{ \
COMMON_TEST_SETUP (ARG_STR); \
check_bool (test_name, FUNC_NAME (ARG), EXPECTED, EXCEPTIONS); \
COMMON_TEST_CLEANUP; \
} \
while (0)
#define RUN_TEST_LOOP_f_b_tg(FUNC_NAME, ARRAY, ROUNDING_MODE) \
IF_ROUND_INIT_ ## ROUNDING_MODE \
for (size_t i = 0; i < sizeof (ARRAY) / sizeof (ARRAY)[0]; i++) \
RUN_TEST_f_b_tg ((ARRAY)[i].arg_str, FUNC_NAME, (ARRAY)[i].arg, \
(ARRAY)[i].RM_##ROUNDING_MODE.expected, \
(ARRAY)[i].RM_##ROUNDING_MODE.exceptions); \
ROUND_RESTORE_ ## ROUNDING_MODE
#define RUN_TEST_f_l(ARG_STR, FUNC_NAME, ARG, EXPECTED, EXCEPTIONS) \
do \
if (enable_test (EXCEPTIONS)) \
{ \
COMMON_TEST_SETUP (ARG_STR); \
check_long (test_name, FUNC_TEST (FUNC_NAME) (ARG), EXPECTED, \
EXCEPTIONS); \
COMMON_TEST_CLEANUP; \
} \
while (0)
#define RUN_TEST_LOOP_f_l(FUNC_NAME, ARRAY, ROUNDING_MODE) \
IF_ROUND_INIT_ ## ROUNDING_MODE \
for (size_t i = 0; i < sizeof (ARRAY) / sizeof (ARRAY)[0]; i++) \
RUN_TEST_f_l ((ARRAY)[i].arg_str, FUNC_NAME, (ARRAY)[i].arg, \
(ARRAY)[i].RM_##ROUNDING_MODE.expected, \
(ARRAY)[i].RM_##ROUNDING_MODE.exceptions); \
ROUND_RESTORE_ ## ROUNDING_MODE
#define RUN_TEST_f_L(ARG_STR, FUNC_NAME, ARG, EXPECTED, EXCEPTIONS) \
do \
if (enable_test (EXCEPTIONS)) \
{ \
COMMON_TEST_SETUP (ARG_STR); \
check_longlong (test_name, FUNC_TEST (FUNC_NAME) (ARG), \
EXPECTED, EXCEPTIONS); \
COMMON_TEST_CLEANUP; \
} \
while (0)
#define RUN_TEST_LOOP_f_L(FUNC_NAME, ARRAY, ROUNDING_MODE) \
IF_ROUND_INIT_ ## ROUNDING_MODE \
for (size_t i = 0; i < sizeof (ARRAY) / sizeof (ARRAY)[0]; i++) \
RUN_TEST_f_L ((ARRAY)[i].arg_str, FUNC_NAME, (ARRAY)[i].arg, \
(ARRAY)[i].RM_##ROUNDING_MODE.expected, \
(ARRAY)[i].RM_##ROUNDING_MODE.exceptions); \
ROUND_RESTORE_ ## ROUNDING_MODE
#define RUN_TEST_fFF_11(ARG_STR, FUNC_NAME, ARG, EXCEPTIONS, \
EXTRA1_VAR, EXTRA1_TEST, \
EXTRA1_EXPECTED, EXTRA2_VAR, \
EXTRA2_TEST, EXTRA2_EXPECTED) \
do \
if (enable_test (EXCEPTIONS)) \
{ \
COMMON_TEST_SETUP (ARG_STR); \
FUNC_TEST (FUNC_NAME) (ARG, &(EXTRA1_VAR), &(EXTRA2_VAR)); \
EXTRA_OUTPUT_TEST_SETUP (ARG_STR, 1); \
if (EXTRA1_TEST) \
check_float (extra1_name, EXTRA1_VAR, EXTRA1_EXPECTED, \
EXCEPTIONS); \
EXTRA_OUTPUT_TEST_CLEANUP (1); \
EXTRA_OUTPUT_TEST_SETUP (ARG_STR, 2); \
if (EXTRA2_TEST) \
check_float (extra2_name, EXTRA2_VAR, EXTRA2_EXPECTED, 0); \
EXTRA_OUTPUT_TEST_CLEANUP (2); \
COMMON_TEST_CLEANUP; \
} \
while (0)
#define RUN_TEST_LOOP_fFF_11(FUNC_NAME, ARRAY, ROUNDING_MODE, \
EXTRA1_VAR, EXTRA2_VAR) \
IF_ROUND_INIT_ ## ROUNDING_MODE \
for (size_t i = 0; i < sizeof (ARRAY) / sizeof (ARRAY)[0]; i++) \
RUN_TEST_fFF_11 ((ARRAY)[i].arg_str, FUNC_NAME, (ARRAY)[i].arg, \
(ARRAY)[i].RM_##ROUNDING_MODE.exceptions, \
EXTRA1_VAR, \
(ARRAY)[i].RM_##ROUNDING_MODE.extra1_test, \
(ARRAY)[i].RM_##ROUNDING_MODE.extra1_expected, \
EXTRA2_VAR, \
(ARRAY)[i].RM_##ROUNDING_MODE.extra2_test, \
(ARRAY)[i].RM_##ROUNDING_MODE.extra2_expected); \
ROUND_RESTORE_ ## ROUNDING_MODE
Add test infrastructure for narrowing libm functions. This patch continues preparations for adding TS 18661-1 narrowing libm functions by adding the required testsuite infrastructure to test such functions through the libm-test infrastructure. That infrastructure is based around testing for a single type, FLOAT. For the narrowing functions, FLOAT, the "main" type for testing, is the function return type; the argument type is ARG_FLOAT. This is consistent with how the code built once for each type, libm-test-support.c, depends on FLOAT for such things as calculating ulps errors in results but can already handle different argument types (pointers, integers, long double for nexttoward). Makefile machinery is added to handle building tests for all pairs of types for which there are narrowing functions (as with non-narrowing functions, aliases are tested just the same as the functions they alias). gen-auto-libm-tests gains a --narrow option for building outputs for narrowing functions (so narrowing sqrt and fma will share the same inputs as non-narrowing, but gen-auto-libm-tests will be run with and without that option to generate different output files). In the narrowing case, the auto-libm-test-out-narrow-* files include annotations for each test about what properties ARG_FLOAT must have to be able to represent all the inputs for that test; those annotations result in calls to the TEST_COND_arg_fmt macro. gen-libm-test.pl has some minor updates to handle narrowing tests (for example, arguments in such tests must be surrounded by ARG_LIT calls instead of LIT calls). Various new macros are added to the C test support code (for example, sNaN initializers need to be properly typed, so arg_snan_value is added; other such arg_* macros are added as it seems cleanest to do so, though some are not strictly required). Special-casing of the ibm128 format to allow for its limitations is adjusted to handle it as the argument format as well as as the result format; thus, the tests of the new functions allow nonzero ulps only in the case where ibm128 is the argument format, as otherwise the functions correspond to fully-defined IEEE operations. The ulps in question appear as e.g. 'Function: "add_ldouble"' in libm-test-ulps (with 1ulp errors then listed for double and float for that function in powerpc); no support is added to generate corresponding faddl / daddl ulps listings in the ulps table in the manual. For the previous patch, I noted the need to avoid spurious macro expansions of identifiers such as "add". A test test-narrow-macros.c is added to verify such macro expansions are successfully avoided, and there is also a -mlong-double-64 version of that test for ldbl-opt. This test is set up to cover the full set of relevant identifiers from the start rather than adding functions one at a time as each function group is added. Tested for x86_64 (this patch in isolation, as well as testing for various configurations in conjunction with the actual addition of "add" functions). * math/Makefile (test-type-pairs): New variable. (test-type-pairs-f64xf128-yes): Likewise. (tests): Add test-narrow-macros. (libm-test-funcs-narrow): New variable. (libm-test-c-narrow): Likewise. (generated): Add $(libm-test-c-narrow). (libm-tests-base-narrow): New variable. (libm-tests-narrow): Likewise. (libm-tests): Add $(libm-tests-narrow). (libm-tests-for-type): Handle $(libm-tests-narrow). (libm-test-c-narrow-obj): New variable. ($(libm-test-c-narrow-obj)): New rule. ($(foreach t,$(libm-tests-narrow),$(objpfx)$(t).c)): Likewise. ($(foreach f,$(libm-test-funcs-narrow),$(objpfx)$(o)-$(f).o)): Use $(o-iterator) to set dependencies and CFLAGS. * math/gen-auto-libm-tests.c: Document use for narrowing functions. (output_for_one_input_case): Take argument NARROW. (generate_output): Likewise. Update call to output_for_one_input_case. (main): Take --narrow option. Update call to generate_output. * math/gen-libm-test.pl (_apply_lit): Take macro name as argument. (apply_lit): Update call to _apply_lit. (apply_arglit): New function. (parse_args): Handle "a" arguments. (parse_auto_input): Handle format names using ":". * math/README.libm-test: Document "a" parameter type. * math/libm-test-support.h (ARG_TYPE_MIN): New macro. (ARG_TYPE_TRUE_MIN): Likewise. (ARG_TYPE_MAX): Likwise. (ARG_MIN_EXP): Likewise. (ARG_MAX_EXP): Likewise. (ARG_MANT_DIG): Likewise. (TEST_COND_arg_ibm128): Likewise. (TEST_COND_ibm128_libgcc): Define conditional on [ARG_FLOAT]. (TEST_COND_arg_fmt): New macro. (init_max_error): Update prototype. * math/libm-test-support.c (test_ibm128): New variable. (init_max_error): Take argument testing_ibm128 and set test_ibm128 instead of using [TEST_COND_ibm128] conditional. (test_exceptions): Use test_ibm128 instead of TEST_COND_ibm128. * math/libm-test-driver.c (STR_ARG_FLOAT): New macro. [TEST_NARROW] (TEST_MSG): New definition. (arg_plus_zero): New macro. (arg_minus_zero): Likewise. (arg_plus_infty): Likewise. (arg_minus_infty): Likewise. (arg_qnan_value_pl): Likewise. (arg_qnan_value): Likewise. (arg_snan_value_pl): Likewise. (arg_snan_value): Likewise. (arg_max_value): Likewise. (arg_min_value): Likewise. (arg_min_subnorm_value): Likewise. [ARG_FLOAT] (struct test_aa_f_data): New struct type. (RUN_TEST_LOOP_aa_f): New macro. (TEST_SUFF): New macro. (TEST_SUFF_STR): Likewise. [!TEST_MATHVEC] (VEC_SUFF): Don't define. (TEST_COND_any_ibm128): New macro. (START): Use TEST_SUFF and TEST_SUFF_STR in initializer for this_func. Update call to init_max_error. * math/test-double.h (FUNC_NARROW_PREFIX): New macro. * math/test-float.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float128.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-math-scalar.h (TEST_NARROW): Likewise. * math/test-math-vector.h (TEST_NARROW): Likewise. * math/test-arg-double.h: New file. * math/test-arg-float128.h: Likewise. * math/test-arg-float32x.h: Likewise. * math/test-arg-float64.h: Likewise. * math/test-arg-float64x.h: Likewise. * math/test-arg-ldouble.h: Likewise. * math/test-math-narrow.h: Likewise. * math/test-narrow-macros.c: Likewise. * sysdeps/ieee754/ldbl-opt/test-narrow-macros-ldbl-64.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (tests): Add test-narrow-macros-ldbl-64. (CFLAGS-test-narrow-macros-ldbl-64.c): New variable.
2018-02-10 05:55:48 +08:00
#if TEST_MATHVEC
# define TEST_SUFF VEC_SUFF
# define TEST_SUFF_STR
#elif TEST_NARROW
# define TEST_SUFF
# define TEST_SUFF_STR "_" ARG_TYPE_STR
#else
# define TEST_SUFF
# define TEST_SUFF_STR
Move non-function-specific parts of libm-test.inc to separate file. libm-test.inc contains both test infrastructure and tests of individual functions. This patch moves the infrastructure to a separate file libm-test-driver.c. This is in preparation for splitting the tests of individual functions into separate source files, which will be processed individually by gen-libm-test.pl (so e.g. libm-test-acos.inc and auto-libm-test-out-acos will be processed by gen-libm-test.pl to produce libm-test-acos.c, and files such as test-double-acos.c will be generated by the Makefile to include appropriate headers, libm-test-driver.c and libm-test-acos.c so tests of each function get run separately). It is no doubt possible to split things up further, so that functions not depending on the type being tested only get compiled once and most of those depending on the type being tested get compiled once per type (rather than separately for variants such as inline / no-inline, and separately for each function being tested after that split), but this rearrangement as-is seems a useful incremental step towards splitting these tests by function. * math/libm-test-driver.c: New file. Based on math/libm-test.inc. * math/libm-test.inc: Move all contents, other than tests of individual functions, to libm-test-driver.c. [!FE_TONEAREST] (FE_TONEAREST): Move to libm-test-driver.c. [!FE_TOWARDZERO] (FE_TOWARDZERO): Likewise. [!FE_UPWARD] (FE_UPWARD): Likewise. [!FE_DOWNWARD] (FE_DOWNWARD): Likewise. (NO_EXCEPTION): Likewise. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ULP_IDX): Likewise. (QTYPE_STR): Likewise. (TEST_COND_binary32): Likewise. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (lit_pi_3_m_4_d): Likewise. (lit_pi_3_m_4_ln10_m_d): Likewise. (lit_pi_2_ln10_m_d): Likewise. (lit_pi_4_ln10_m_d): Likewise. (lit_pi_ln10_d): Likewise. (lit_pi_2_d): Likewise. (lit_pi_4_d): Likewise. (lit_pi): Likewise. (lit_e): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (plus_zero): Likewise. (minus_zero): Likewise. (plus_infty): Likewise. (minus_infty): Likewise. (qnan_value_pl): Likewise. (qnan_value): Likewise. (snan_value_pl): Likewise. (snan_value): Likewise. (max_value): Likewise. (min_value): Likewise. (min_subnorm_value): Likewise. (snan_value_ld): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (struct test_f_f_data): Likewise. (struct test_ff_f_data): Likewise. (struct test_fj_f_data): Likewise. (struct test_fi_f_data): Likewise. (struct test_fl_f_data): Likewise. (struct test_if_f_data): Likewise. (struct test_fff_f_data): Likewise. (struct test_fiu_M_data): Likewise. (struct test_fiu_U_data): Likewise. (struct test_c_f_data): Likewise. (struct test_f_f1_data): Likewise. (struct test_fF_f1_data): Likewise. (struct test_ffI_f1_data): Likewise. (struct test_c_c_data): Likewise. (struct test_cc_c_data): Likewise. (struct test_f_i_data): Likewise. (struct test_ff_i_data): Likewise. (struct test_f_l_data): Likewise. (struct test_f_L_data): Likewise. (struct test_fFF_11_data): Likewise. (struct test_Ff_b1_data): Likewise. (IF_ROUND_INIT_): Likewise. (IF_ROUND_INIT_FE_DOWNWARD): Likewise. (IF_ROUND_INIT_FE_TONEAREST): Likewise. (IF_ROUND_INIT_FE_TOWARDZERO): Likewise. (IF_ROUND_INIT_FE_UPWARD): Likewise. (ROUND_RESTORE_): Likewise. (ROUND_RESTORE_FE_DOWNWARD): Likewise. (ROUND_RESTORE_FE_TONEAREST): Likewise. (ROUND_RESTORE_FE_TOWARDZERO): Likewise. (ROUND_RESTORE_FE_UPWARD): Likewise. (RM_): Likewise. (RM_FE_DOWNWARD): Likewise. (RM_FE_TONEAREST): Likewise. (RM_FE_TOWARDZERO): Likewise. (RM_FE_UPWARD): Likewise. (COMMON_TEST_SETUP): Likewise. (EXTRA_OUTPUT_TEST_SETUP): Likewise. (COMMON_TEST_CLEANUP): Likewise. (EXTRA_OUTPUT_TEST_CLEANUP): Likewise. (RUN_TEST_f_f): Likewise. (RUN_TEST_LOOP_f_f): Likewise. (RUN_TEST_fp_f): Likewise. (RUN_TEST_LOOP_fp_f): Likewise. (RUN_TEST_2_f): Likewise. (RUN_TEST_LOOP_2_f): Likewise. (RUN_TEST_ff_f): Likewise. (RUN_TEST_LOOP_ff_f): Likewise. (RUN_TEST_LOOP_fj_f): Likewise. (RUN_TEST_fi_f): Likewise. (RUN_TEST_LOOP_fi_f): Likewise. (RUN_TEST_fl_f): Likewise. (RUN_TEST_LOOP_fl_f): Likewise. (RUN_TEST_if_f): Likewise. (RUN_TEST_LOOP_if_f): Likewise. (RUN_TEST_fff_f): Likewise. (RUN_TEST_LOOP_fff_f): Likewise. (RUN_TEST_fiu_M): Likewise. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (RUN_TEST_c_f): Likewise. (RUN_TEST_LOOP_c_f): Likewise. (RUN_TEST_f_f1): Likewise. (RUN_TEST_LOOP_f_f1): Likewise. (RUN_TEST_fF_f1): Likewise. (RUN_TEST_LOOP_fF_f1): Likewise. (RUN_TEST_fI_f1): Likewise. (RUN_TEST_LOOP_fI_f1): Likewise. (RUN_TEST_ffI_f1_mod8): Likewise. (RUN_TEST_LOOP_ffI_f1_mod8): Likewise. (RUN_TEST_Ff_b1): Likewise. (RUN_TEST_LOOP_Ff_b1): Likewise. (RUN_TEST_Ffp_b1): Likewise. (RUN_TEST_LOOP_Ffp_b1): Likewise. (RUN_TEST_c_c): Likewise. (RUN_TEST_LOOP_c_c): Likewise. (RUN_TEST_cc_c): Likewise. (RUN_TEST_LOOP_cc_c): Likewise. (RUN_TEST_f_i): Likewise. (RUN_TEST_LOOP_f_i): Likewise. (RUN_TEST_f_i_tg): Likewise. (RUN_TEST_LOOP_f_i_tg): Likewise. (RUN_TEST_ff_b): Likewise. (RUN_TEST_LOOP_ff_b): Likewise. (RUN_TEST_ff_i_tg): Likewise. (RUN_TEST_LOOP_ff_i_tg): Likewise. (RUN_TEST_f_b): Likewise. (RUN_TEST_LOOP_f_b): Likewise. (RUN_TEST_f_b_tg): Likewise. (RUN_TEST_LOOP_f_b_tg): Likewise. (RUN_TEST_f_l): Likewise. (RUN_TEST_LOOP_f_l): Likewise. (RUN_TEST_f_L): Likewise. (RUN_TEST_LOOP_f_L): Likewise. (RUN_TEST_fFF_11): Likewise. (RUN_TEST_LOOP_fFF_11): Likewise. (VEC_SUFF): Likewise. (STR_CONCAT): Likewise. (STR_CON3): Likewise. (HAVE_VECTOR): Likewise. (START): Likewise. (END): Likewise. (END_COMPLEX): Likewise. (ALL_RM_TEST): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Likewise. (parse_opt): Likewise. (argp): Likewise. (check_ulp): Likewise. (main): Likewise. (do_test): New function. Call tests of individual functions previously called from main.
2017-02-07 02:12:16 +08:00
#endif
#define STR_CONCAT(a, b, c) __STRING (a##b##c)
#define STR_CON3(a, b, c) STR_CONCAT (a, b, c)
Add test infrastructure for narrowing libm functions. This patch continues preparations for adding TS 18661-1 narrowing libm functions by adding the required testsuite infrastructure to test such functions through the libm-test infrastructure. That infrastructure is based around testing for a single type, FLOAT. For the narrowing functions, FLOAT, the "main" type for testing, is the function return type; the argument type is ARG_FLOAT. This is consistent with how the code built once for each type, libm-test-support.c, depends on FLOAT for such things as calculating ulps errors in results but can already handle different argument types (pointers, integers, long double for nexttoward). Makefile machinery is added to handle building tests for all pairs of types for which there are narrowing functions (as with non-narrowing functions, aliases are tested just the same as the functions they alias). gen-auto-libm-tests gains a --narrow option for building outputs for narrowing functions (so narrowing sqrt and fma will share the same inputs as non-narrowing, but gen-auto-libm-tests will be run with and without that option to generate different output files). In the narrowing case, the auto-libm-test-out-narrow-* files include annotations for each test about what properties ARG_FLOAT must have to be able to represent all the inputs for that test; those annotations result in calls to the TEST_COND_arg_fmt macro. gen-libm-test.pl has some minor updates to handle narrowing tests (for example, arguments in such tests must be surrounded by ARG_LIT calls instead of LIT calls). Various new macros are added to the C test support code (for example, sNaN initializers need to be properly typed, so arg_snan_value is added; other such arg_* macros are added as it seems cleanest to do so, though some are not strictly required). Special-casing of the ibm128 format to allow for its limitations is adjusted to handle it as the argument format as well as as the result format; thus, the tests of the new functions allow nonzero ulps only in the case where ibm128 is the argument format, as otherwise the functions correspond to fully-defined IEEE operations. The ulps in question appear as e.g. 'Function: "add_ldouble"' in libm-test-ulps (with 1ulp errors then listed for double and float for that function in powerpc); no support is added to generate corresponding faddl / daddl ulps listings in the ulps table in the manual. For the previous patch, I noted the need to avoid spurious macro expansions of identifiers such as "add". A test test-narrow-macros.c is added to verify such macro expansions are successfully avoided, and there is also a -mlong-double-64 version of that test for ldbl-opt. This test is set up to cover the full set of relevant identifiers from the start rather than adding functions one at a time as each function group is added. Tested for x86_64 (this patch in isolation, as well as testing for various configurations in conjunction with the actual addition of "add" functions). * math/Makefile (test-type-pairs): New variable. (test-type-pairs-f64xf128-yes): Likewise. (tests): Add test-narrow-macros. (libm-test-funcs-narrow): New variable. (libm-test-c-narrow): Likewise. (generated): Add $(libm-test-c-narrow). (libm-tests-base-narrow): New variable. (libm-tests-narrow): Likewise. (libm-tests): Add $(libm-tests-narrow). (libm-tests-for-type): Handle $(libm-tests-narrow). (libm-test-c-narrow-obj): New variable. ($(libm-test-c-narrow-obj)): New rule. ($(foreach t,$(libm-tests-narrow),$(objpfx)$(t).c)): Likewise. ($(foreach f,$(libm-test-funcs-narrow),$(objpfx)$(o)-$(f).o)): Use $(o-iterator) to set dependencies and CFLAGS. * math/gen-auto-libm-tests.c: Document use for narrowing functions. (output_for_one_input_case): Take argument NARROW. (generate_output): Likewise. Update call to output_for_one_input_case. (main): Take --narrow option. Update call to generate_output. * math/gen-libm-test.pl (_apply_lit): Take macro name as argument. (apply_lit): Update call to _apply_lit. (apply_arglit): New function. (parse_args): Handle "a" arguments. (parse_auto_input): Handle format names using ":". * math/README.libm-test: Document "a" parameter type. * math/libm-test-support.h (ARG_TYPE_MIN): New macro. (ARG_TYPE_TRUE_MIN): Likewise. (ARG_TYPE_MAX): Likwise. (ARG_MIN_EXP): Likewise. (ARG_MAX_EXP): Likewise. (ARG_MANT_DIG): Likewise. (TEST_COND_arg_ibm128): Likewise. (TEST_COND_ibm128_libgcc): Define conditional on [ARG_FLOAT]. (TEST_COND_arg_fmt): New macro. (init_max_error): Update prototype. * math/libm-test-support.c (test_ibm128): New variable. (init_max_error): Take argument testing_ibm128 and set test_ibm128 instead of using [TEST_COND_ibm128] conditional. (test_exceptions): Use test_ibm128 instead of TEST_COND_ibm128. * math/libm-test-driver.c (STR_ARG_FLOAT): New macro. [TEST_NARROW] (TEST_MSG): New definition. (arg_plus_zero): New macro. (arg_minus_zero): Likewise. (arg_plus_infty): Likewise. (arg_minus_infty): Likewise. (arg_qnan_value_pl): Likewise. (arg_qnan_value): Likewise. (arg_snan_value_pl): Likewise. (arg_snan_value): Likewise. (arg_max_value): Likewise. (arg_min_value): Likewise. (arg_min_subnorm_value): Likewise. [ARG_FLOAT] (struct test_aa_f_data): New struct type. (RUN_TEST_LOOP_aa_f): New macro. (TEST_SUFF): New macro. (TEST_SUFF_STR): Likewise. [!TEST_MATHVEC] (VEC_SUFF): Don't define. (TEST_COND_any_ibm128): New macro. (START): Use TEST_SUFF and TEST_SUFF_STR in initializer for this_func. Update call to init_max_error. * math/test-double.h (FUNC_NARROW_PREFIX): New macro. * math/test-float.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float128.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-math-scalar.h (TEST_NARROW): Likewise. * math/test-math-vector.h (TEST_NARROW): Likewise. * math/test-arg-double.h: New file. * math/test-arg-float128.h: Likewise. * math/test-arg-float32x.h: Likewise. * math/test-arg-float64.h: Likewise. * math/test-arg-float64x.h: Likewise. * math/test-arg-ldouble.h: Likewise. * math/test-math-narrow.h: Likewise. * math/test-narrow-macros.c: Likewise. * sysdeps/ieee754/ldbl-opt/test-narrow-macros-ldbl-64.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (tests): Add test-narrow-macros-ldbl-64. (CFLAGS-test-narrow-macros-ldbl-64.c): New variable.
2018-02-10 05:55:48 +08:00
#if TEST_NARROW
# define TEST_COND_any_ibm128 (TEST_COND_ibm128 || TEST_COND_arg_ibm128)
#else
# define TEST_COND_any_ibm128 TEST_COND_ibm128
#endif
Move non-function-specific parts of libm-test.inc to separate file. libm-test.inc contains both test infrastructure and tests of individual functions. This patch moves the infrastructure to a separate file libm-test-driver.c. This is in preparation for splitting the tests of individual functions into separate source files, which will be processed individually by gen-libm-test.pl (so e.g. libm-test-acos.inc and auto-libm-test-out-acos will be processed by gen-libm-test.pl to produce libm-test-acos.c, and files such as test-double-acos.c will be generated by the Makefile to include appropriate headers, libm-test-driver.c and libm-test-acos.c so tests of each function get run separately). It is no doubt possible to split things up further, so that functions not depending on the type being tested only get compiled once and most of those depending on the type being tested get compiled once per type (rather than separately for variants such as inline / no-inline, and separately for each function being tested after that split), but this rearrangement as-is seems a useful incremental step towards splitting these tests by function. * math/libm-test-driver.c: New file. Based on math/libm-test.inc. * math/libm-test.inc: Move all contents, other than tests of individual functions, to libm-test-driver.c. [!FE_TONEAREST] (FE_TONEAREST): Move to libm-test-driver.c. [!FE_TOWARDZERO] (FE_TOWARDZERO): Likewise. [!FE_UPWARD] (FE_UPWARD): Likewise. [!FE_DOWNWARD] (FE_DOWNWARD): Likewise. (NO_EXCEPTION): Likewise. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ULP_IDX): Likewise. (QTYPE_STR): Likewise. (TEST_COND_binary32): Likewise. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (lit_pi_3_m_4_d): Likewise. (lit_pi_3_m_4_ln10_m_d): Likewise. (lit_pi_2_ln10_m_d): Likewise. (lit_pi_4_ln10_m_d): Likewise. (lit_pi_ln10_d): Likewise. (lit_pi_2_d): Likewise. (lit_pi_4_d): Likewise. (lit_pi): Likewise. (lit_e): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (plus_zero): Likewise. (minus_zero): Likewise. (plus_infty): Likewise. (minus_infty): Likewise. (qnan_value_pl): Likewise. (qnan_value): Likewise. (snan_value_pl): Likewise. (snan_value): Likewise. (max_value): Likewise. (min_value): Likewise. (min_subnorm_value): Likewise. (snan_value_ld): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (struct test_f_f_data): Likewise. (struct test_ff_f_data): Likewise. (struct test_fj_f_data): Likewise. (struct test_fi_f_data): Likewise. (struct test_fl_f_data): Likewise. (struct test_if_f_data): Likewise. (struct test_fff_f_data): Likewise. (struct test_fiu_M_data): Likewise. (struct test_fiu_U_data): Likewise. (struct test_c_f_data): Likewise. (struct test_f_f1_data): Likewise. (struct test_fF_f1_data): Likewise. (struct test_ffI_f1_data): Likewise. (struct test_c_c_data): Likewise. (struct test_cc_c_data): Likewise. (struct test_f_i_data): Likewise. (struct test_ff_i_data): Likewise. (struct test_f_l_data): Likewise. (struct test_f_L_data): Likewise. (struct test_fFF_11_data): Likewise. (struct test_Ff_b1_data): Likewise. (IF_ROUND_INIT_): Likewise. (IF_ROUND_INIT_FE_DOWNWARD): Likewise. (IF_ROUND_INIT_FE_TONEAREST): Likewise. (IF_ROUND_INIT_FE_TOWARDZERO): Likewise. (IF_ROUND_INIT_FE_UPWARD): Likewise. (ROUND_RESTORE_): Likewise. (ROUND_RESTORE_FE_DOWNWARD): Likewise. (ROUND_RESTORE_FE_TONEAREST): Likewise. (ROUND_RESTORE_FE_TOWARDZERO): Likewise. (ROUND_RESTORE_FE_UPWARD): Likewise. (RM_): Likewise. (RM_FE_DOWNWARD): Likewise. (RM_FE_TONEAREST): Likewise. (RM_FE_TOWARDZERO): Likewise. (RM_FE_UPWARD): Likewise. (COMMON_TEST_SETUP): Likewise. (EXTRA_OUTPUT_TEST_SETUP): Likewise. (COMMON_TEST_CLEANUP): Likewise. (EXTRA_OUTPUT_TEST_CLEANUP): Likewise. (RUN_TEST_f_f): Likewise. (RUN_TEST_LOOP_f_f): Likewise. (RUN_TEST_fp_f): Likewise. (RUN_TEST_LOOP_fp_f): Likewise. (RUN_TEST_2_f): Likewise. (RUN_TEST_LOOP_2_f): Likewise. (RUN_TEST_ff_f): Likewise. (RUN_TEST_LOOP_ff_f): Likewise. (RUN_TEST_LOOP_fj_f): Likewise. (RUN_TEST_fi_f): Likewise. (RUN_TEST_LOOP_fi_f): Likewise. (RUN_TEST_fl_f): Likewise. (RUN_TEST_LOOP_fl_f): Likewise. (RUN_TEST_if_f): Likewise. (RUN_TEST_LOOP_if_f): Likewise. (RUN_TEST_fff_f): Likewise. (RUN_TEST_LOOP_fff_f): Likewise. (RUN_TEST_fiu_M): Likewise. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (RUN_TEST_c_f): Likewise. (RUN_TEST_LOOP_c_f): Likewise. (RUN_TEST_f_f1): Likewise. (RUN_TEST_LOOP_f_f1): Likewise. (RUN_TEST_fF_f1): Likewise. (RUN_TEST_LOOP_fF_f1): Likewise. (RUN_TEST_fI_f1): Likewise. (RUN_TEST_LOOP_fI_f1): Likewise. (RUN_TEST_ffI_f1_mod8): Likewise. (RUN_TEST_LOOP_ffI_f1_mod8): Likewise. (RUN_TEST_Ff_b1): Likewise. (RUN_TEST_LOOP_Ff_b1): Likewise. (RUN_TEST_Ffp_b1): Likewise. (RUN_TEST_LOOP_Ffp_b1): Likewise. (RUN_TEST_c_c): Likewise. (RUN_TEST_LOOP_c_c): Likewise. (RUN_TEST_cc_c): Likewise. (RUN_TEST_LOOP_cc_c): Likewise. (RUN_TEST_f_i): Likewise. (RUN_TEST_LOOP_f_i): Likewise. (RUN_TEST_f_i_tg): Likewise. (RUN_TEST_LOOP_f_i_tg): Likewise. (RUN_TEST_ff_b): Likewise. (RUN_TEST_LOOP_ff_b): Likewise. (RUN_TEST_ff_i_tg): Likewise. (RUN_TEST_LOOP_ff_i_tg): Likewise. (RUN_TEST_f_b): Likewise. (RUN_TEST_LOOP_f_b): Likewise. (RUN_TEST_f_b_tg): Likewise. (RUN_TEST_LOOP_f_b_tg): Likewise. (RUN_TEST_f_l): Likewise. (RUN_TEST_LOOP_f_l): Likewise. (RUN_TEST_f_L): Likewise. (RUN_TEST_LOOP_f_L): Likewise. (RUN_TEST_fFF_11): Likewise. (RUN_TEST_LOOP_fFF_11): Likewise. (VEC_SUFF): Likewise. (STR_CONCAT): Likewise. (STR_CON3): Likewise. (HAVE_VECTOR): Likewise. (START): Likewise. (END): Likewise. (END_COMPLEX): Likewise. (ALL_RM_TEST): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Likewise. (parse_opt): Likewise. (argp): Likewise. (check_ulp): Likewise. (main): Likewise. (do_test): New function. Call tests of individual functions previously called from main.
2017-02-07 02:12:16 +08:00
/* Start and end the tests for a given function. */
#define START(FUN, SUFF, EXACT) \
CHECK_ARCH_EXT; \
Add test infrastructure for narrowing libm functions. This patch continues preparations for adding TS 18661-1 narrowing libm functions by adding the required testsuite infrastructure to test such functions through the libm-test infrastructure. That infrastructure is based around testing for a single type, FLOAT. For the narrowing functions, FLOAT, the "main" type for testing, is the function return type; the argument type is ARG_FLOAT. This is consistent with how the code built once for each type, libm-test-support.c, depends on FLOAT for such things as calculating ulps errors in results but can already handle different argument types (pointers, integers, long double for nexttoward). Makefile machinery is added to handle building tests for all pairs of types for which there are narrowing functions (as with non-narrowing functions, aliases are tested just the same as the functions they alias). gen-auto-libm-tests gains a --narrow option for building outputs for narrowing functions (so narrowing sqrt and fma will share the same inputs as non-narrowing, but gen-auto-libm-tests will be run with and without that option to generate different output files). In the narrowing case, the auto-libm-test-out-narrow-* files include annotations for each test about what properties ARG_FLOAT must have to be able to represent all the inputs for that test; those annotations result in calls to the TEST_COND_arg_fmt macro. gen-libm-test.pl has some minor updates to handle narrowing tests (for example, arguments in such tests must be surrounded by ARG_LIT calls instead of LIT calls). Various new macros are added to the C test support code (for example, sNaN initializers need to be properly typed, so arg_snan_value is added; other such arg_* macros are added as it seems cleanest to do so, though some are not strictly required). Special-casing of the ibm128 format to allow for its limitations is adjusted to handle it as the argument format as well as as the result format; thus, the tests of the new functions allow nonzero ulps only in the case where ibm128 is the argument format, as otherwise the functions correspond to fully-defined IEEE operations. The ulps in question appear as e.g. 'Function: "add_ldouble"' in libm-test-ulps (with 1ulp errors then listed for double and float for that function in powerpc); no support is added to generate corresponding faddl / daddl ulps listings in the ulps table in the manual. For the previous patch, I noted the need to avoid spurious macro expansions of identifiers such as "add". A test test-narrow-macros.c is added to verify such macro expansions are successfully avoided, and there is also a -mlong-double-64 version of that test for ldbl-opt. This test is set up to cover the full set of relevant identifiers from the start rather than adding functions one at a time as each function group is added. Tested for x86_64 (this patch in isolation, as well as testing for various configurations in conjunction with the actual addition of "add" functions). * math/Makefile (test-type-pairs): New variable. (test-type-pairs-f64xf128-yes): Likewise. (tests): Add test-narrow-macros. (libm-test-funcs-narrow): New variable. (libm-test-c-narrow): Likewise. (generated): Add $(libm-test-c-narrow). (libm-tests-base-narrow): New variable. (libm-tests-narrow): Likewise. (libm-tests): Add $(libm-tests-narrow). (libm-tests-for-type): Handle $(libm-tests-narrow). (libm-test-c-narrow-obj): New variable. ($(libm-test-c-narrow-obj)): New rule. ($(foreach t,$(libm-tests-narrow),$(objpfx)$(t).c)): Likewise. ($(foreach f,$(libm-test-funcs-narrow),$(objpfx)$(o)-$(f).o)): Use $(o-iterator) to set dependencies and CFLAGS. * math/gen-auto-libm-tests.c: Document use for narrowing functions. (output_for_one_input_case): Take argument NARROW. (generate_output): Likewise. Update call to output_for_one_input_case. (main): Take --narrow option. Update call to generate_output. * math/gen-libm-test.pl (_apply_lit): Take macro name as argument. (apply_lit): Update call to _apply_lit. (apply_arglit): New function. (parse_args): Handle "a" arguments. (parse_auto_input): Handle format names using ":". * math/README.libm-test: Document "a" parameter type. * math/libm-test-support.h (ARG_TYPE_MIN): New macro. (ARG_TYPE_TRUE_MIN): Likewise. (ARG_TYPE_MAX): Likwise. (ARG_MIN_EXP): Likewise. (ARG_MAX_EXP): Likewise. (ARG_MANT_DIG): Likewise. (TEST_COND_arg_ibm128): Likewise. (TEST_COND_ibm128_libgcc): Define conditional on [ARG_FLOAT]. (TEST_COND_arg_fmt): New macro. (init_max_error): Update prototype. * math/libm-test-support.c (test_ibm128): New variable. (init_max_error): Take argument testing_ibm128 and set test_ibm128 instead of using [TEST_COND_ibm128] conditional. (test_exceptions): Use test_ibm128 instead of TEST_COND_ibm128. * math/libm-test-driver.c (STR_ARG_FLOAT): New macro. [TEST_NARROW] (TEST_MSG): New definition. (arg_plus_zero): New macro. (arg_minus_zero): Likewise. (arg_plus_infty): Likewise. (arg_minus_infty): Likewise. (arg_qnan_value_pl): Likewise. (arg_qnan_value): Likewise. (arg_snan_value_pl): Likewise. (arg_snan_value): Likewise. (arg_max_value): Likewise. (arg_min_value): Likewise. (arg_min_subnorm_value): Likewise. [ARG_FLOAT] (struct test_aa_f_data): New struct type. (RUN_TEST_LOOP_aa_f): New macro. (TEST_SUFF): New macro. (TEST_SUFF_STR): Likewise. [!TEST_MATHVEC] (VEC_SUFF): Don't define. (TEST_COND_any_ibm128): New macro. (START): Use TEST_SUFF and TEST_SUFF_STR in initializer for this_func. Update call to init_max_error. * math/test-double.h (FUNC_NARROW_PREFIX): New macro. * math/test-float.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float128.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float32x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64.h (FUNC_NARROW_PREFIX): Likewise. * math/test-float64x.h (FUNC_NARROW_PREFIX): Likewise. * math/test-math-scalar.h (TEST_NARROW): Likewise. * math/test-math-vector.h (TEST_NARROW): Likewise. * math/test-arg-double.h: New file. * math/test-arg-float128.h: Likewise. * math/test-arg-float32x.h: Likewise. * math/test-arg-float64.h: Likewise. * math/test-arg-float64x.h: Likewise. * math/test-arg-ldouble.h: Likewise. * math/test-math-narrow.h: Likewise. * math/test-narrow-macros.c: Likewise. * sysdeps/ieee754/ldbl-opt/test-narrow-macros-ldbl-64.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (tests): Add test-narrow-macros-ldbl-64. (CFLAGS-test-narrow-macros-ldbl-64.c): New variable.
2018-02-10 05:55:48 +08:00
const char *this_func \
= STR_CON3 (FUN, SUFF, TEST_SUFF) TEST_SUFF_STR; \
init_max_error (this_func, EXACT, TEST_COND_any_ibm128)
Move non-function-specific parts of libm-test.inc to separate file. libm-test.inc contains both test infrastructure and tests of individual functions. This patch moves the infrastructure to a separate file libm-test-driver.c. This is in preparation for splitting the tests of individual functions into separate source files, which will be processed individually by gen-libm-test.pl (so e.g. libm-test-acos.inc and auto-libm-test-out-acos will be processed by gen-libm-test.pl to produce libm-test-acos.c, and files such as test-double-acos.c will be generated by the Makefile to include appropriate headers, libm-test-driver.c and libm-test-acos.c so tests of each function get run separately). It is no doubt possible to split things up further, so that functions not depending on the type being tested only get compiled once and most of those depending on the type being tested get compiled once per type (rather than separately for variants such as inline / no-inline, and separately for each function being tested after that split), but this rearrangement as-is seems a useful incremental step towards splitting these tests by function. * math/libm-test-driver.c: New file. Based on math/libm-test.inc. * math/libm-test.inc: Move all contents, other than tests of individual functions, to libm-test-driver.c. [!FE_TONEAREST] (FE_TONEAREST): Move to libm-test-driver.c. [!FE_TOWARDZERO] (FE_TOWARDZERO): Likewise. [!FE_UPWARD] (FE_UPWARD): Likewise. [!FE_DOWNWARD] (FE_DOWNWARD): Likewise. (NO_EXCEPTION): Likewise. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ULP_IDX): Likewise. (QTYPE_STR): Likewise. (TEST_COND_binary32): Likewise. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (lit_pi_3_m_4_d): Likewise. (lit_pi_3_m_4_ln10_m_d): Likewise. (lit_pi_2_ln10_m_d): Likewise. (lit_pi_4_ln10_m_d): Likewise. (lit_pi_ln10_d): Likewise. (lit_pi_2_d): Likewise. (lit_pi_4_d): Likewise. (lit_pi): Likewise. (lit_e): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (plus_zero): Likewise. (minus_zero): Likewise. (plus_infty): Likewise. (minus_infty): Likewise. (qnan_value_pl): Likewise. (qnan_value): Likewise. (snan_value_pl): Likewise. (snan_value): Likewise. (max_value): Likewise. (min_value): Likewise. (min_subnorm_value): Likewise. (snan_value_ld): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (struct test_f_f_data): Likewise. (struct test_ff_f_data): Likewise. (struct test_fj_f_data): Likewise. (struct test_fi_f_data): Likewise. (struct test_fl_f_data): Likewise. (struct test_if_f_data): Likewise. (struct test_fff_f_data): Likewise. (struct test_fiu_M_data): Likewise. (struct test_fiu_U_data): Likewise. (struct test_c_f_data): Likewise. (struct test_f_f1_data): Likewise. (struct test_fF_f1_data): Likewise. (struct test_ffI_f1_data): Likewise. (struct test_c_c_data): Likewise. (struct test_cc_c_data): Likewise. (struct test_f_i_data): Likewise. (struct test_ff_i_data): Likewise. (struct test_f_l_data): Likewise. (struct test_f_L_data): Likewise. (struct test_fFF_11_data): Likewise. (struct test_Ff_b1_data): Likewise. (IF_ROUND_INIT_): Likewise. (IF_ROUND_INIT_FE_DOWNWARD): Likewise. (IF_ROUND_INIT_FE_TONEAREST): Likewise. (IF_ROUND_INIT_FE_TOWARDZERO): Likewise. (IF_ROUND_INIT_FE_UPWARD): Likewise. (ROUND_RESTORE_): Likewise. (ROUND_RESTORE_FE_DOWNWARD): Likewise. (ROUND_RESTORE_FE_TONEAREST): Likewise. (ROUND_RESTORE_FE_TOWARDZERO): Likewise. (ROUND_RESTORE_FE_UPWARD): Likewise. (RM_): Likewise. (RM_FE_DOWNWARD): Likewise. (RM_FE_TONEAREST): Likewise. (RM_FE_TOWARDZERO): Likewise. (RM_FE_UPWARD): Likewise. (COMMON_TEST_SETUP): Likewise. (EXTRA_OUTPUT_TEST_SETUP): Likewise. (COMMON_TEST_CLEANUP): Likewise. (EXTRA_OUTPUT_TEST_CLEANUP): Likewise. (RUN_TEST_f_f): Likewise. (RUN_TEST_LOOP_f_f): Likewise. (RUN_TEST_fp_f): Likewise. (RUN_TEST_LOOP_fp_f): Likewise. (RUN_TEST_2_f): Likewise. (RUN_TEST_LOOP_2_f): Likewise. (RUN_TEST_ff_f): Likewise. (RUN_TEST_LOOP_ff_f): Likewise. (RUN_TEST_LOOP_fj_f): Likewise. (RUN_TEST_fi_f): Likewise. (RUN_TEST_LOOP_fi_f): Likewise. (RUN_TEST_fl_f): Likewise. (RUN_TEST_LOOP_fl_f): Likewise. (RUN_TEST_if_f): Likewise. (RUN_TEST_LOOP_if_f): Likewise. (RUN_TEST_fff_f): Likewise. (RUN_TEST_LOOP_fff_f): Likewise. (RUN_TEST_fiu_M): Likewise. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (RUN_TEST_c_f): Likewise. (RUN_TEST_LOOP_c_f): Likewise. (RUN_TEST_f_f1): Likewise. (RUN_TEST_LOOP_f_f1): Likewise. (RUN_TEST_fF_f1): Likewise. (RUN_TEST_LOOP_fF_f1): Likewise. (RUN_TEST_fI_f1): Likewise. (RUN_TEST_LOOP_fI_f1): Likewise. (RUN_TEST_ffI_f1_mod8): Likewise. (RUN_TEST_LOOP_ffI_f1_mod8): Likewise. (RUN_TEST_Ff_b1): Likewise. (RUN_TEST_LOOP_Ff_b1): Likewise. (RUN_TEST_Ffp_b1): Likewise. (RUN_TEST_LOOP_Ffp_b1): Likewise. (RUN_TEST_c_c): Likewise. (RUN_TEST_LOOP_c_c): Likewise. (RUN_TEST_cc_c): Likewise. (RUN_TEST_LOOP_cc_c): Likewise. (RUN_TEST_f_i): Likewise. (RUN_TEST_LOOP_f_i): Likewise. (RUN_TEST_f_i_tg): Likewise. (RUN_TEST_LOOP_f_i_tg): Likewise. (RUN_TEST_ff_b): Likewise. (RUN_TEST_LOOP_ff_b): Likewise. (RUN_TEST_ff_i_tg): Likewise. (RUN_TEST_LOOP_ff_i_tg): Likewise. (RUN_TEST_f_b): Likewise. (RUN_TEST_LOOP_f_b): Likewise. (RUN_TEST_f_b_tg): Likewise. (RUN_TEST_LOOP_f_b_tg): Likewise. (RUN_TEST_f_l): Likewise. (RUN_TEST_LOOP_f_l): Likewise. (RUN_TEST_f_L): Likewise. (RUN_TEST_LOOP_f_L): Likewise. (RUN_TEST_fFF_11): Likewise. (RUN_TEST_LOOP_fFF_11): Likewise. (VEC_SUFF): Likewise. (STR_CONCAT): Likewise. (STR_CON3): Likewise. (HAVE_VECTOR): Likewise. (START): Likewise. (END): Likewise. (END_COMPLEX): Likewise. (ALL_RM_TEST): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Likewise. (parse_opt): Likewise. (argp): Likewise. (check_ulp): Likewise. (main): Likewise. (do_test): New function. Call tests of individual functions previously called from main.
2017-02-07 02:12:16 +08:00
#define END \
check_max_error (this_func)
Move non-function-specific parts of libm-test.inc to separate file. libm-test.inc contains both test infrastructure and tests of individual functions. This patch moves the infrastructure to a separate file libm-test-driver.c. This is in preparation for splitting the tests of individual functions into separate source files, which will be processed individually by gen-libm-test.pl (so e.g. libm-test-acos.inc and auto-libm-test-out-acos will be processed by gen-libm-test.pl to produce libm-test-acos.c, and files such as test-double-acos.c will be generated by the Makefile to include appropriate headers, libm-test-driver.c and libm-test-acos.c so tests of each function get run separately). It is no doubt possible to split things up further, so that functions not depending on the type being tested only get compiled once and most of those depending on the type being tested get compiled once per type (rather than separately for variants such as inline / no-inline, and separately for each function being tested after that split), but this rearrangement as-is seems a useful incremental step towards splitting these tests by function. * math/libm-test-driver.c: New file. Based on math/libm-test.inc. * math/libm-test.inc: Move all contents, other than tests of individual functions, to libm-test-driver.c. [!FE_TONEAREST] (FE_TONEAREST): Move to libm-test-driver.c. [!FE_TOWARDZERO] (FE_TOWARDZERO): Likewise. [!FE_UPWARD] (FE_UPWARD): Likewise. [!FE_DOWNWARD] (FE_DOWNWARD): Likewise. (NO_EXCEPTION): Likewise. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ULP_IDX): Likewise. (QTYPE_STR): Likewise. (TEST_COND_binary32): Likewise. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (lit_pi_3_m_4_d): Likewise. (lit_pi_3_m_4_ln10_m_d): Likewise. (lit_pi_2_ln10_m_d): Likewise. (lit_pi_4_ln10_m_d): Likewise. (lit_pi_ln10_d): Likewise. (lit_pi_2_d): Likewise. (lit_pi_4_d): Likewise. (lit_pi): Likewise. (lit_e): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (plus_zero): Likewise. (minus_zero): Likewise. (plus_infty): Likewise. (minus_infty): Likewise. (qnan_value_pl): Likewise. (qnan_value): Likewise. (snan_value_pl): Likewise. (snan_value): Likewise. (max_value): Likewise. (min_value): Likewise. (min_subnorm_value): Likewise. (snan_value_ld): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (struct test_f_f_data): Likewise. (struct test_ff_f_data): Likewise. (struct test_fj_f_data): Likewise. (struct test_fi_f_data): Likewise. (struct test_fl_f_data): Likewise. (struct test_if_f_data): Likewise. (struct test_fff_f_data): Likewise. (struct test_fiu_M_data): Likewise. (struct test_fiu_U_data): Likewise. (struct test_c_f_data): Likewise. (struct test_f_f1_data): Likewise. (struct test_fF_f1_data): Likewise. (struct test_ffI_f1_data): Likewise. (struct test_c_c_data): Likewise. (struct test_cc_c_data): Likewise. (struct test_f_i_data): Likewise. (struct test_ff_i_data): Likewise. (struct test_f_l_data): Likewise. (struct test_f_L_data): Likewise. (struct test_fFF_11_data): Likewise. (struct test_Ff_b1_data): Likewise. (IF_ROUND_INIT_): Likewise. (IF_ROUND_INIT_FE_DOWNWARD): Likewise. (IF_ROUND_INIT_FE_TONEAREST): Likewise. (IF_ROUND_INIT_FE_TOWARDZERO): Likewise. (IF_ROUND_INIT_FE_UPWARD): Likewise. (ROUND_RESTORE_): Likewise. (ROUND_RESTORE_FE_DOWNWARD): Likewise. (ROUND_RESTORE_FE_TONEAREST): Likewise. (ROUND_RESTORE_FE_TOWARDZERO): Likewise. (ROUND_RESTORE_FE_UPWARD): Likewise. (RM_): Likewise. (RM_FE_DOWNWARD): Likewise. (RM_FE_TONEAREST): Likewise. (RM_FE_TOWARDZERO): Likewise. (RM_FE_UPWARD): Likewise. (COMMON_TEST_SETUP): Likewise. (EXTRA_OUTPUT_TEST_SETUP): Likewise. (COMMON_TEST_CLEANUP): Likewise. (EXTRA_OUTPUT_TEST_CLEANUP): Likewise. (RUN_TEST_f_f): Likewise. (RUN_TEST_LOOP_f_f): Likewise. (RUN_TEST_fp_f): Likewise. (RUN_TEST_LOOP_fp_f): Likewise. (RUN_TEST_2_f): Likewise. (RUN_TEST_LOOP_2_f): Likewise. (RUN_TEST_ff_f): Likewise. (RUN_TEST_LOOP_ff_f): Likewise. (RUN_TEST_LOOP_fj_f): Likewise. (RUN_TEST_fi_f): Likewise. (RUN_TEST_LOOP_fi_f): Likewise. (RUN_TEST_fl_f): Likewise. (RUN_TEST_LOOP_fl_f): Likewise. (RUN_TEST_if_f): Likewise. (RUN_TEST_LOOP_if_f): Likewise. (RUN_TEST_fff_f): Likewise. (RUN_TEST_LOOP_fff_f): Likewise. (RUN_TEST_fiu_M): Likewise. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (RUN_TEST_c_f): Likewise. (RUN_TEST_LOOP_c_f): Likewise. (RUN_TEST_f_f1): Likewise. (RUN_TEST_LOOP_f_f1): Likewise. (RUN_TEST_fF_f1): Likewise. (RUN_TEST_LOOP_fF_f1): Likewise. (RUN_TEST_fI_f1): Likewise. (RUN_TEST_LOOP_fI_f1): Likewise. (RUN_TEST_ffI_f1_mod8): Likewise. (RUN_TEST_LOOP_ffI_f1_mod8): Likewise. (RUN_TEST_Ff_b1): Likewise. (RUN_TEST_LOOP_Ff_b1): Likewise. (RUN_TEST_Ffp_b1): Likewise. (RUN_TEST_LOOP_Ffp_b1): Likewise. (RUN_TEST_c_c): Likewise. (RUN_TEST_LOOP_c_c): Likewise. (RUN_TEST_cc_c): Likewise. (RUN_TEST_LOOP_cc_c): Likewise. (RUN_TEST_f_i): Likewise. (RUN_TEST_LOOP_f_i): Likewise. (RUN_TEST_f_i_tg): Likewise. (RUN_TEST_LOOP_f_i_tg): Likewise. (RUN_TEST_ff_b): Likewise. (RUN_TEST_LOOP_ff_b): Likewise. (RUN_TEST_ff_i_tg): Likewise. (RUN_TEST_LOOP_ff_i_tg): Likewise. (RUN_TEST_f_b): Likewise. (RUN_TEST_LOOP_f_b): Likewise. (RUN_TEST_f_b_tg): Likewise. (RUN_TEST_LOOP_f_b_tg): Likewise. (RUN_TEST_f_l): Likewise. (RUN_TEST_LOOP_f_l): Likewise. (RUN_TEST_f_L): Likewise. (RUN_TEST_LOOP_f_L): Likewise. (RUN_TEST_fFF_11): Likewise. (RUN_TEST_LOOP_fFF_11): Likewise. (VEC_SUFF): Likewise. (STR_CONCAT): Likewise. (STR_CON3): Likewise. (HAVE_VECTOR): Likewise. (START): Likewise. (END): Likewise. (END_COMPLEX): Likewise. (ALL_RM_TEST): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Likewise. (parse_opt): Likewise. (argp): Likewise. (check_ulp): Likewise. (main): Likewise. (do_test): New function. Call tests of individual functions previously called from main.
2017-02-07 02:12:16 +08:00
#define END_COMPLEX \
check_complex_max_error (this_func)
Move non-function-specific parts of libm-test.inc to separate file. libm-test.inc contains both test infrastructure and tests of individual functions. This patch moves the infrastructure to a separate file libm-test-driver.c. This is in preparation for splitting the tests of individual functions into separate source files, which will be processed individually by gen-libm-test.pl (so e.g. libm-test-acos.inc and auto-libm-test-out-acos will be processed by gen-libm-test.pl to produce libm-test-acos.c, and files such as test-double-acos.c will be generated by the Makefile to include appropriate headers, libm-test-driver.c and libm-test-acos.c so tests of each function get run separately). It is no doubt possible to split things up further, so that functions not depending on the type being tested only get compiled once and most of those depending on the type being tested get compiled once per type (rather than separately for variants such as inline / no-inline, and separately for each function being tested after that split), but this rearrangement as-is seems a useful incremental step towards splitting these tests by function. * math/libm-test-driver.c: New file. Based on math/libm-test.inc. * math/libm-test.inc: Move all contents, other than tests of individual functions, to libm-test-driver.c. [!FE_TONEAREST] (FE_TONEAREST): Move to libm-test-driver.c. [!FE_TOWARDZERO] (FE_TOWARDZERO): Likewise. [!FE_UPWARD] (FE_UPWARD): Likewise. [!FE_DOWNWARD] (FE_DOWNWARD): Likewise. (NO_EXCEPTION): Likewise. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ULP_IDX): Likewise. (QTYPE_STR): Likewise. (TEST_COND_binary32): Likewise. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (lit_pi_3_m_4_d): Likewise. (lit_pi_3_m_4_ln10_m_d): Likewise. (lit_pi_2_ln10_m_d): Likewise. (lit_pi_4_ln10_m_d): Likewise. (lit_pi_ln10_d): Likewise. (lit_pi_2_d): Likewise. (lit_pi_4_d): Likewise. (lit_pi): Likewise. (lit_e): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (plus_zero): Likewise. (minus_zero): Likewise. (plus_infty): Likewise. (minus_infty): Likewise. (qnan_value_pl): Likewise. (qnan_value): Likewise. (snan_value_pl): Likewise. (snan_value): Likewise. (max_value): Likewise. (min_value): Likewise. (min_subnorm_value): Likewise. (snan_value_ld): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (struct test_f_f_data): Likewise. (struct test_ff_f_data): Likewise. (struct test_fj_f_data): Likewise. (struct test_fi_f_data): Likewise. (struct test_fl_f_data): Likewise. (struct test_if_f_data): Likewise. (struct test_fff_f_data): Likewise. (struct test_fiu_M_data): Likewise. (struct test_fiu_U_data): Likewise. (struct test_c_f_data): Likewise. (struct test_f_f1_data): Likewise. (struct test_fF_f1_data): Likewise. (struct test_ffI_f1_data): Likewise. (struct test_c_c_data): Likewise. (struct test_cc_c_data): Likewise. (struct test_f_i_data): Likewise. (struct test_ff_i_data): Likewise. (struct test_f_l_data): Likewise. (struct test_f_L_data): Likewise. (struct test_fFF_11_data): Likewise. (struct test_Ff_b1_data): Likewise. (IF_ROUND_INIT_): Likewise. (IF_ROUND_INIT_FE_DOWNWARD): Likewise. (IF_ROUND_INIT_FE_TONEAREST): Likewise. (IF_ROUND_INIT_FE_TOWARDZERO): Likewise. (IF_ROUND_INIT_FE_UPWARD): Likewise. (ROUND_RESTORE_): Likewise. (ROUND_RESTORE_FE_DOWNWARD): Likewise. (ROUND_RESTORE_FE_TONEAREST): Likewise. (ROUND_RESTORE_FE_TOWARDZERO): Likewise. (ROUND_RESTORE_FE_UPWARD): Likewise. (RM_): Likewise. (RM_FE_DOWNWARD): Likewise. (RM_FE_TONEAREST): Likewise. (RM_FE_TOWARDZERO): Likewise. (RM_FE_UPWARD): Likewise. (COMMON_TEST_SETUP): Likewise. (EXTRA_OUTPUT_TEST_SETUP): Likewise. (COMMON_TEST_CLEANUP): Likewise. (EXTRA_OUTPUT_TEST_CLEANUP): Likewise. (RUN_TEST_f_f): Likewise. (RUN_TEST_LOOP_f_f): Likewise. (RUN_TEST_fp_f): Likewise. (RUN_TEST_LOOP_fp_f): Likewise. (RUN_TEST_2_f): Likewise. (RUN_TEST_LOOP_2_f): Likewise. (RUN_TEST_ff_f): Likewise. (RUN_TEST_LOOP_ff_f): Likewise. (RUN_TEST_LOOP_fj_f): Likewise. (RUN_TEST_fi_f): Likewise. (RUN_TEST_LOOP_fi_f): Likewise. (RUN_TEST_fl_f): Likewise. (RUN_TEST_LOOP_fl_f): Likewise. (RUN_TEST_if_f): Likewise. (RUN_TEST_LOOP_if_f): Likewise. (RUN_TEST_fff_f): Likewise. (RUN_TEST_LOOP_fff_f): Likewise. (RUN_TEST_fiu_M): Likewise. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (RUN_TEST_c_f): Likewise. (RUN_TEST_LOOP_c_f): Likewise. (RUN_TEST_f_f1): Likewise. (RUN_TEST_LOOP_f_f1): Likewise. (RUN_TEST_fF_f1): Likewise. (RUN_TEST_LOOP_fF_f1): Likewise. (RUN_TEST_fI_f1): Likewise. (RUN_TEST_LOOP_fI_f1): Likewise. (RUN_TEST_ffI_f1_mod8): Likewise. (RUN_TEST_LOOP_ffI_f1_mod8): Likewise. (RUN_TEST_Ff_b1): Likewise. (RUN_TEST_LOOP_Ff_b1): Likewise. (RUN_TEST_Ffp_b1): Likewise. (RUN_TEST_LOOP_Ffp_b1): Likewise. (RUN_TEST_c_c): Likewise. (RUN_TEST_LOOP_c_c): Likewise. (RUN_TEST_cc_c): Likewise. (RUN_TEST_LOOP_cc_c): Likewise. (RUN_TEST_f_i): Likewise. (RUN_TEST_LOOP_f_i): Likewise. (RUN_TEST_f_i_tg): Likewise. (RUN_TEST_LOOP_f_i_tg): Likewise. (RUN_TEST_ff_b): Likewise. (RUN_TEST_LOOP_ff_b): Likewise. (RUN_TEST_ff_i_tg): Likewise. (RUN_TEST_LOOP_ff_i_tg): Likewise. (RUN_TEST_f_b): Likewise. (RUN_TEST_LOOP_f_b): Likewise. (RUN_TEST_f_b_tg): Likewise. (RUN_TEST_LOOP_f_b_tg): Likewise. (RUN_TEST_f_l): Likewise. (RUN_TEST_LOOP_f_l): Likewise. (RUN_TEST_f_L): Likewise. (RUN_TEST_LOOP_f_L): Likewise. (RUN_TEST_fFF_11): Likewise. (RUN_TEST_LOOP_fFF_11): Likewise. (VEC_SUFF): Likewise. (STR_CONCAT): Likewise. (STR_CON3): Likewise. (HAVE_VECTOR): Likewise. (START): Likewise. (END): Likewise. (END_COMPLEX): Likewise. (ALL_RM_TEST): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Likewise. (parse_opt): Likewise. (argp): Likewise. (check_ulp): Likewise. (main): Likewise. (do_test): New function. Call tests of individual functions previously called from main.
2017-02-07 02:12:16 +08:00
/* Run tests for a given function in all rounding modes. */
#define ALL_RM_TEST(FUNC, EXACT, ARRAY, LOOP_MACRO, END_MACRO, ...) \
do \
{ \
do \
{ \
START (FUNC,, EXACT); \
LOOP_MACRO (FUNC, ARRAY, , ## __VA_ARGS__); \
END_MACRO; \
} \
while (0); \
do \
{ \
START (FUNC, _downward, EXACT); \
LOOP_MACRO (FUNC, ARRAY, FE_DOWNWARD, ## __VA_ARGS__); \
END_MACRO; \
} \
while (0); \
do \
{ \
START (FUNC, _towardzero, EXACT); \
LOOP_MACRO (FUNC, ARRAY, FE_TOWARDZERO, ## __VA_ARGS__); \
END_MACRO; \
} \
while (0); \
do \
{ \
START (FUNC, _upward, EXACT); \
LOOP_MACRO (FUNC, ARRAY, FE_UPWARD, ## __VA_ARGS__); \
END_MACRO; \
} \
while (0); \
} \
while (0);
/* Short description of program. */
Build most libm-test support code once per type. libm-test-driver.c contains various functions used in the course of libm testing, which are built as part of each test using this machinery. Currently, these functions get built for three tests for each type (e.g. test-float, test-ifloat, test-float-finite), plus the vector function tests. All these tests are huge and thus slow to build; the output of gen-libm-test.pl totals around 40 MB across all functions. To make the individual tests built from the Makefile smaller, it makes sense to split these tests up so the tests for each function are built separately (thus, three tests for each (function, type) pair, plus vector tests built only for functions that actually have vector versions). This improves parallelism and means that if tests fail, the summary of failed tests makes it more obvious where the problem might be without needing to look in the .out files to see which functions' tests failed (though architecture maintainers still need to keep libm-test-ulps up to date to avoid spurious failures of little interest). Simply including libm-test-driver.c as-is in such individual-function tests does not work because of unused static check_* functions (those functions only being used for the types of the outputs of the function under test). It also means the common code gets built over 1000 times instead of nine (plus vector tests). To avoid that issue, this patch splits out the bulk of the libm-test-driver.c code into a separate file libm-test-support.c (with a few functions made non-static). That separate file is built only once for each floating-point type (so at present three times, or twice on architectures with long double = double). Definitions needed in both libm-test-support.c and libm-test-driver.c go in libm-test-support.h (it's possible some of those are in fact only needed in one of the two files). libm-test-driver.c keeps definitions of a limited number of variables used to configure how libm-test-support.c behaves, various macros and structures needed by individual-function tests, and the main function. This move is also consistent in spirit with the move away from test-skeleton.c having all the test support code, to a small support/test-driver.c included in individual tests with most of the code built separately. Tested for x86_64 and x86. * math/libm-test-support.c: New file. Content from math/libm-test-driver.c. * math/libm-test-support.h: Likewise. * math/libm-test-support-double.c: New file. * math/libm-test-support-float.c: Likewise. * math/libm-test-support-ldouble.c: Likewise. * math/libm-test-driver.c: Remove main comment and header includes. Include libm-test-support.h. [!_GNU_SOURCE] (_GNU_SOURCE): Do not define. (flag_test_errno): Remove static. (flag_test_exceptions): Likewise. (flag_test_finite): Likewise. (flag_test_inline): Likewise. (flag_test_mathvec): Likewise. (test_msg): Likewise. (NO_EXCEPTION): Remove. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ulp_idx): Likewise. (qtype_str): Remove static. (TEST_COND_binary32): Remove. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Remove static. (argp): Likewise. (parse_opt): Remove. (check_ulp): Likewise. (libm_test_init): Likewise. (libm_test_finish): Likewise. * math/Makefile (libm-test-support): New variable. (test-extras): Add libm-test-support files. (extra-test-objs): Likewise. (CFLAGS-libm-test-support-float.c): New variable. (CFLAGS-libm-test-support-double.c): Likewise. (CFLAGS-libm-test-support-ldouble.c): Likewise. ($(addprefix $(objpfx),$(libm-tests)): Depend on appropriate libm-test-support objects.
2017-02-09 05:11:49 +08:00
const char doc[] = "Math test suite: " TEST_MSG ;
Move non-function-specific parts of libm-test.inc to separate file. libm-test.inc contains both test infrastructure and tests of individual functions. This patch moves the infrastructure to a separate file libm-test-driver.c. This is in preparation for splitting the tests of individual functions into separate source files, which will be processed individually by gen-libm-test.pl (so e.g. libm-test-acos.inc and auto-libm-test-out-acos will be processed by gen-libm-test.pl to produce libm-test-acos.c, and files such as test-double-acos.c will be generated by the Makefile to include appropriate headers, libm-test-driver.c and libm-test-acos.c so tests of each function get run separately). It is no doubt possible to split things up further, so that functions not depending on the type being tested only get compiled once and most of those depending on the type being tested get compiled once per type (rather than separately for variants such as inline / no-inline, and separately for each function being tested after that split), but this rearrangement as-is seems a useful incremental step towards splitting these tests by function. * math/libm-test-driver.c: New file. Based on math/libm-test.inc. * math/libm-test.inc: Move all contents, other than tests of individual functions, to libm-test-driver.c. [!FE_TONEAREST] (FE_TONEAREST): Move to libm-test-driver.c. [!FE_TOWARDZERO] (FE_TOWARDZERO): Likewise. [!FE_UPWARD] (FE_UPWARD): Likewise. [!FE_DOWNWARD] (FE_DOWNWARD): Likewise. (NO_EXCEPTION): Likewise. (INVALID_EXCEPTION): Likewise. (DIVIDE_BY_ZERO_EXCEPTION): Likewise. (OVERFLOW_EXCEPTION): Likewise. (UNDERFLOW_EXCEPTION): Likewise. (INEXACT_EXCEPTION): Likewise. (INVALID_EXCEPTION_OK): Likewise. (DIVIDE_BY_ZERO_EXCEPTION_OK): Likewise. (OVERFLOW_EXCEPTION_OK): Likewise. (UNDERFLOW_EXCEPTION_OK): Likewise. (NO_INEXACT_EXCEPTION): Likewise. (EXCEPTIONS_OK): Likewise. (IGNORE_ZERO_INF_SIGN): Likewise. (TEST_NAN_SIGN): Likewise. (TEST_NAN_PAYLOAD): Likewise. (NO_TEST_INLINE): Likewise. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): Likewise. (__CONCATX): Likewise. (TYPE_MIN): Likewise. (TYPE_TRUE_MIN): Likewise. (TYPE_MAX): Likewise. (MIN_EXP): Likewise. (MAX_EXP): Likewise. (MANT_DIG): Likewise. (FSTR_MAX): Likewise. (ULP_IDX): Likewise. (QTYPE_STR): Likewise. (TEST_COND_binary32): Likewise. (TEST_COND_binary64): Likewise. (TEST_COND_binary128): Likewise. (TEST_COND_ibm128): Likewise. (TEST_COND_intel96): Likewise. (TEST_COND_m68k96): Likewise. (TEST_COND_ibm128_libgcc): Likewise. (XFAIL_IBM128_LIBGCC): Likewise. (PAYLOAD_DIG): Likewise. (UNDERFLOW_EXCEPTION_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_OK_FLOAT): Likewise. (UNDERFLOW_EXCEPTION_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_OK_DOUBLE): Likewise. (UNDERFLOW_EXCEPTION_LDOUBLE_IBM): Likewise. (UNDERFLOW_EXCEPTION_BEFORE_ROUNDING): Likewise. (TEST_COND_long32): Likewise. (TEST_COND_long64): Likewise. (TEST_COND_before_rounding): Likewise. (TEST_COND_after_rounding): Likewise. (lit_pi_3_m_4_d): Likewise. (lit_pi_3_m_4_ln10_m_d): Likewise. (lit_pi_2_ln10_m_d): Likewise. (lit_pi_4_ln10_m_d): Likewise. (lit_pi_ln10_d): Likewise. (lit_pi_2_d): Likewise. (lit_pi_4_d): Likewise. (lit_pi): Likewise. (lit_e): Likewise. (ulps_file_name): Likewise. (ulps_file): Likewise. (output_ulps): Likewise. (output_dir): Likewise. (noErrors): Likewise. (noTests): Likewise. (noExcTests): Likewise. (noErrnoTests): Likewise. (verbose): Likewise. (output_max_error): Likewise. (output_points): Likewise. (ignore_max_ulp): Likewise. (plus_zero): Likewise. (minus_zero): Likewise. (plus_infty): Likewise. (minus_infty): Likewise. (qnan_value_pl): Likewise. (qnan_value): Likewise. (snan_value_pl): Likewise. (snan_value): Likewise. (max_value): Likewise. (min_value): Likewise. (min_subnorm_value): Likewise. (snan_value_ld): Likewise. (max_error): Likewise. (real_max_error): Likewise. (imag_max_error): Likewise. (prev_max_error): Likewise. (prev_real_max_error): Likewise. (prev_imag_max_error): Likewise. (max_valid_error): Likewise. (TYPE_DECIMAL_DIG): Likewise. (TYPE_HEX_DIG): Likewise. (fmt_ftostr): Likewise. (compare_ulp_data): Likewise. (find_ulps): Likewise. (init_max_error): Likewise. (set_max_error): Likewise. (print_float): Likewise. (print_screen): Likewise. (print_screen_max_error): Likewise. (update_stats): Likewise. (print_function_ulps): Likewise. (print_complex_function_ulps): Likewise. (fpstack_test): Likewise. (print_max_error): Likewise. (print_complex_max_error): Likewise. (test_single_exception): Likewise. (test_exceptions): Likewise. (test_single_errno): Likewise. (test_errno): Likewise. (ULPDIFF): Likewise. (ulp): Likewise. (check_float_internal): Likewise. (check_float): Likewise. (check_complex): Likewise. (check_int): Likewise. (check_long): Likewise. (check_bool): Likewise. (check_longlong): Likewise. (check_intmax_t): Likewise. (check_uintmax_t): Likewise. (enable_test): Likewise. (struct test_f_f_data): Likewise. (struct test_ff_f_data): Likewise. (struct test_fj_f_data): Likewise. (struct test_fi_f_data): Likewise. (struct test_fl_f_data): Likewise. (struct test_if_f_data): Likewise. (struct test_fff_f_data): Likewise. (struct test_fiu_M_data): Likewise. (struct test_fiu_U_data): Likewise. (struct test_c_f_data): Likewise. (struct test_f_f1_data): Likewise. (struct test_fF_f1_data): Likewise. (struct test_ffI_f1_data): Likewise. (struct test_c_c_data): Likewise. (struct test_cc_c_data): Likewise. (struct test_f_i_data): Likewise. (struct test_ff_i_data): Likewise. (struct test_f_l_data): Likewise. (struct test_f_L_data): Likewise. (struct test_fFF_11_data): Likewise. (struct test_Ff_b1_data): Likewise. (IF_ROUND_INIT_): Likewise. (IF_ROUND_INIT_FE_DOWNWARD): Likewise. (IF_ROUND_INIT_FE_TONEAREST): Likewise. (IF_ROUND_INIT_FE_TOWARDZERO): Likewise. (IF_ROUND_INIT_FE_UPWARD): Likewise. (ROUND_RESTORE_): Likewise. (ROUND_RESTORE_FE_DOWNWARD): Likewise. (ROUND_RESTORE_FE_TONEAREST): Likewise. (ROUND_RESTORE_FE_TOWARDZERO): Likewise. (ROUND_RESTORE_FE_UPWARD): Likewise. (RM_): Likewise. (RM_FE_DOWNWARD): Likewise. (RM_FE_TONEAREST): Likewise. (RM_FE_TOWARDZERO): Likewise. (RM_FE_UPWARD): Likewise. (COMMON_TEST_SETUP): Likewise. (EXTRA_OUTPUT_TEST_SETUP): Likewise. (COMMON_TEST_CLEANUP): Likewise. (EXTRA_OUTPUT_TEST_CLEANUP): Likewise. (RUN_TEST_f_f): Likewise. (RUN_TEST_LOOP_f_f): Likewise. (RUN_TEST_fp_f): Likewise. (RUN_TEST_LOOP_fp_f): Likewise. (RUN_TEST_2_f): Likewise. (RUN_TEST_LOOP_2_f): Likewise. (RUN_TEST_ff_f): Likewise. (RUN_TEST_LOOP_ff_f): Likewise. (RUN_TEST_LOOP_fj_f): Likewise. (RUN_TEST_fi_f): Likewise. (RUN_TEST_LOOP_fi_f): Likewise. (RUN_TEST_fl_f): Likewise. (RUN_TEST_LOOP_fl_f): Likewise. (RUN_TEST_if_f): Likewise. (RUN_TEST_LOOP_if_f): Likewise. (RUN_TEST_fff_f): Likewise. (RUN_TEST_LOOP_fff_f): Likewise. (RUN_TEST_fiu_M): Likewise. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (RUN_TEST_c_f): Likewise. (RUN_TEST_LOOP_c_f): Likewise. (RUN_TEST_f_f1): Likewise. (RUN_TEST_LOOP_f_f1): Likewise. (RUN_TEST_fF_f1): Likewise. (RUN_TEST_LOOP_fF_f1): Likewise. (RUN_TEST_fI_f1): Likewise. (RUN_TEST_LOOP_fI_f1): Likewise. (RUN_TEST_ffI_f1_mod8): Likewise. (RUN_TEST_LOOP_ffI_f1_mod8): Likewise. (RUN_TEST_Ff_b1): Likewise. (RUN_TEST_LOOP_Ff_b1): Likewise. (RUN_TEST_Ffp_b1): Likewise. (RUN_TEST_LOOP_Ffp_b1): Likewise. (RUN_TEST_c_c): Likewise. (RUN_TEST_LOOP_c_c): Likewise. (RUN_TEST_cc_c): Likewise. (RUN_TEST_LOOP_cc_c): Likewise. (RUN_TEST_f_i): Likewise. (RUN_TEST_LOOP_f_i): Likewise. (RUN_TEST_f_i_tg): Likewise. (RUN_TEST_LOOP_f_i_tg): Likewise. (RUN_TEST_ff_b): Likewise. (RUN_TEST_LOOP_ff_b): Likewise. (RUN_TEST_ff_i_tg): Likewise. (RUN_TEST_LOOP_ff_i_tg): Likewise. (RUN_TEST_f_b): Likewise. (RUN_TEST_LOOP_f_b): Likewise. (RUN_TEST_f_b_tg): Likewise. (RUN_TEST_LOOP_f_b_tg): Likewise. (RUN_TEST_f_l): Likewise. (RUN_TEST_LOOP_f_l): Likewise. (RUN_TEST_f_L): Likewise. (RUN_TEST_LOOP_f_L): Likewise. (RUN_TEST_fFF_11): Likewise. (RUN_TEST_LOOP_fFF_11): Likewise. (VEC_SUFF): Likewise. (STR_CONCAT): Likewise. (STR_CON3): Likewise. (HAVE_VECTOR): Likewise. (START): Likewise. (END): Likewise. (END_COMPLEX): Likewise. (ALL_RM_TEST): Likewise. (matherr): Likewise. (initialize): Likewise. (options): Likewise. (doc): Likewise. (parse_opt): Likewise. (argp): Likewise. (check_ulp): Likewise. (main): Likewise. (do_test): New function. Call tests of individual functions previously called from main.
2017-02-07 02:12:16 +08:00
static void do_test (void);
Refactor some code in libm-test-driver.c. Splitting libm tests by function will mean about a thousand such tests built separately instead of the present nine (plus vector variants). When this is done, it's desirable to avoid needing to build all the test infrastructure so many times. Also, simply including libm-test-driver.c as-is into per-function tests doesn't actually work, because the various check_* functions are not used by all tests and so generate errors for unused static functions. Although some pieces of infrastructure depend on the type being tested while others don't, building once per type seems the simplest approach. This patch makes changes to libm-test-driver.c in preparation for that. Various cases where functions directly use macros such as TEST_ERRNO (that may vary depending on things other than the type under test) are changed to use variables initialized using those macros, while most of the code in main is moved out to functions libm_test_init and libm_test_fini. The idea is that all the functions in libm-test-driver.c will be moved out in a subsequent patch to be built once per type (and be no longer static when they are used from per-function tests), while libm-test-driver.c remains containing definitions of various variables (no longer static, of course, because they'll be used in the per-type code) and the main function. Declarations / macros relevant to both the once-per-type code and the per-function tests will go in a shared header. Tested for x86_64. * math/libm-test-driver.c (flag_test_errno): New variable. (flag_test_exceptions): Likewise. (flag_test_finite): Likewise. (flag_test_inline): Likewise. (flag_test_mathvec): Likewise. (test_msg): Likewise. (ulp_idx): Likewise. (qtype_str): Likewise. (ULP_IDX): Remove macro. (QTYPE_STR): Likewise. (find_ulps): Use ulp_idx not ULP_IDX. (print_function_ulps): Use qtype_str, printed with %s, not QTYPE_STR, printed with concatentation to format string. (print_complex_function_ulps): Likewise. (test_exceptions): Use flag_test_exceptions not TEST_EXCEPTIONS. (test_errno): Use flag_test_errno not TEST_ERRNO. (enable_test): Use flag_test_inline, flag_test_finite and flag_test_mathvec instead of TEST_INLINE, TEST_FINITE and TEST_MATHVEC. (libm_test_init): New function. Factored out of main. (libm_test_finish): Likewise. (main): Call libm_test_init and libm_test_finish and move most code to those functions.
2017-02-07 07:23:54 +08:00
int
main (int argc, char **argv)
{
libm_test_init (argc, argv);
INIT_ARCH_EXT;
Refactor some code in libm-test-driver.c. Splitting libm tests by function will mean about a thousand such tests built separately instead of the present nine (plus vector variants). When this is done, it's desirable to avoid needing to build all the test infrastructure so many times. Also, simply including libm-test-driver.c as-is into per-function tests doesn't actually work, because the various check_* functions are not used by all tests and so generate errors for unused static functions. Although some pieces of infrastructure depend on the type being tested while others don't, building once per type seems the simplest approach. This patch makes changes to libm-test-driver.c in preparation for that. Various cases where functions directly use macros such as TEST_ERRNO (that may vary depending on things other than the type under test) are changed to use variables initialized using those macros, while most of the code in main is moved out to functions libm_test_init and libm_test_fini. The idea is that all the functions in libm-test-driver.c will be moved out in a subsequent patch to be built once per type (and be no longer static when they are used from per-function tests), while libm-test-driver.c remains containing definitions of various variables (no longer static, of course, because they'll be used in the per-type code) and the main function. Declarations / macros relevant to both the once-per-type code and the per-function tests will go in a shared header. Tested for x86_64. * math/libm-test-driver.c (flag_test_errno): New variable. (flag_test_exceptions): Likewise. (flag_test_finite): Likewise. (flag_test_inline): Likewise. (flag_test_mathvec): Likewise. (test_msg): Likewise. (ulp_idx): Likewise. (qtype_str): Likewise. (ULP_IDX): Remove macro. (QTYPE_STR): Likewise. (find_ulps): Use ulp_idx not ULP_IDX. (print_function_ulps): Use qtype_str, printed with %s, not QTYPE_STR, printed with concatentation to format string. (print_complex_function_ulps): Likewise. (test_exceptions): Use flag_test_exceptions not TEST_EXCEPTIONS. (test_errno): Use flag_test_errno not TEST_ERRNO. (enable_test): Use flag_test_inline, flag_test_finite and flag_test_mathvec instead of TEST_INLINE, TEST_FINITE and TEST_MATHVEC. (libm_test_init): New function. Factored out of main. (libm_test_finish): Likewise. (main): Call libm_test_init and libm_test_finish and move most code to those functions.
2017-02-07 07:23:54 +08:00
do_test ();
return libm_test_finish ();
}