glibc/libio/tst-wmemstream3.c

45 lines
1.4 KiB
C
Raw Normal View History

libio: Multiple fixes for open_{w}memstram (BZ#18241 and BZ#20181) This patches fixes multiples issues on open_{w}memstream reported on both BZ#18241 and BZ#20181: - failed fseek does not set errno. - negative offset in fseek fails even when resulting position is a valid one. - a flush after write if the current write position is not at the end of the stream currupt data. The main fix is on seek operation for memstream (_IO_{w}str_seekoff), where both _IO_read_ptr and _IO_read_end pointer are updated if a write operation has occured (similar to default file operations). Also, to calculate the offset on both read and write pointers, a temporary value is instead of updating the argument supplied value. Negative offset are valid if resulting internal pointer is within the range of _IO_{read,write}_base and _IO_{read,write}_end. Also POSIX states that a null or wide null shall be appended to the current buffer iff a write moves the position to a value larger than the current lenght. Current implementation appends a null or wide null regardless of this condition. This patch fixes it by removing the 'else' condition on _IO_{w}mem_sync. Checked on x86_64. [BZ #18241] [BZ #20181] * libio/Makefile (test): Add tst-memstream3 and tst-wmemstream3. * libio/memstream.c (_IO_mem_sync): Only append a null byte if write position is at the end the buffer. * libio/wmemstream.c (_IO_wmem_sync): Likewise. * libio/strops.c (_IO_str_switch_to_get_mode): New function. (_IO_str_seekoff): Set correct offset from negative displacement and set EINVAL for invalid ones. * libio/wstrops.c (enlarge_userbuf): Use correct function to calculate buffer length. (_IO_wstr_switch_to_get_mode): New function. (_IO_wstr_seekoff): Set correct offset from negative displacement and set EINVAL for invalid ones. * libio/tst-memstream3.c: New file. * libio/tst-wmemstream3.c: Likewise. * manual/examples/memstrm.c: Remove warning when priting size_t.
2016-07-26 01:54:29 +08:00
/* Test for open_memstream implementation.
Copyright (C) 2016-2022 Free Software Foundation, Inc.
libio: Multiple fixes for open_{w}memstram (BZ#18241 and BZ#20181) This patches fixes multiples issues on open_{w}memstream reported on both BZ#18241 and BZ#20181: - failed fseek does not set errno. - negative offset in fseek fails even when resulting position is a valid one. - a flush after write if the current write position is not at the end of the stream currupt data. The main fix is on seek operation for memstream (_IO_{w}str_seekoff), where both _IO_read_ptr and _IO_read_end pointer are updated if a write operation has occured (similar to default file operations). Also, to calculate the offset on both read and write pointers, a temporary value is instead of updating the argument supplied value. Negative offset are valid if resulting internal pointer is within the range of _IO_{read,write}_base and _IO_{read,write}_end. Also POSIX states that a null or wide null shall be appended to the current buffer iff a write moves the position to a value larger than the current lenght. Current implementation appends a null or wide null regardless of this condition. This patch fixes it by removing the 'else' condition on _IO_{w}mem_sync. Checked on x86_64. [BZ #18241] [BZ #20181] * libio/Makefile (test): Add tst-memstream3 and tst-wmemstream3. * libio/memstream.c (_IO_mem_sync): Only append a null byte if write position is at the end the buffer. * libio/wmemstream.c (_IO_wmem_sync): Likewise. * libio/strops.c (_IO_str_switch_to_get_mode): New function. (_IO_str_seekoff): Set correct offset from negative displacement and set EINVAL for invalid ones. * libio/wstrops.c (enlarge_userbuf): Use correct function to calculate buffer length. (_IO_wstr_switch_to_get_mode): New function. (_IO_wstr_seekoff): Set correct offset from negative displacement and set EINVAL for invalid ones. * libio/tst-memstream3.c: New file. * libio/tst-wmemstream3.c: Likewise. * manual/examples/memstrm.c: Remove warning when priting size_t.
2016-07-26 01:54:29 +08:00
This file is part of the GNU C Library.
The GNU C Library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
The GNU C Library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with the GNU C Library; if not, see
Prefer https to http for gnu.org and fsf.org URLs Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '*.po' \ ! -name 'ChangeLog*' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-09-07 13:40:42 +08:00
<https://www.gnu.org/licenses/>. */
libio: Multiple fixes for open_{w}memstram (BZ#18241 and BZ#20181) This patches fixes multiples issues on open_{w}memstream reported on both BZ#18241 and BZ#20181: - failed fseek does not set errno. - negative offset in fseek fails even when resulting position is a valid one. - a flush after write if the current write position is not at the end of the stream currupt data. The main fix is on seek operation for memstream (_IO_{w}str_seekoff), where both _IO_read_ptr and _IO_read_end pointer are updated if a write operation has occured (similar to default file operations). Also, to calculate the offset on both read and write pointers, a temporary value is instead of updating the argument supplied value. Negative offset are valid if resulting internal pointer is within the range of _IO_{read,write}_base and _IO_{read,write}_end. Also POSIX states that a null or wide null shall be appended to the current buffer iff a write moves the position to a value larger than the current lenght. Current implementation appends a null or wide null regardless of this condition. This patch fixes it by removing the 'else' condition on _IO_{w}mem_sync. Checked on x86_64. [BZ #18241] [BZ #20181] * libio/Makefile (test): Add tst-memstream3 and tst-wmemstream3. * libio/memstream.c (_IO_mem_sync): Only append a null byte if write position is at the end the buffer. * libio/wmemstream.c (_IO_wmem_sync): Likewise. * libio/strops.c (_IO_str_switch_to_get_mode): New function. (_IO_str_seekoff): Set correct offset from negative displacement and set EINVAL for invalid ones. * libio/wstrops.c (enlarge_userbuf): Use correct function to calculate buffer length. (_IO_wstr_switch_to_get_mode): New function. (_IO_wstr_seekoff): Set correct offset from negative displacement and set EINVAL for invalid ones. * libio/tst-memstream3.c: New file. * libio/tst-wmemstream3.c: Likewise. * manual/examples/memstrm.c: Remove warning when priting size_t.
2016-07-26 01:54:29 +08:00
#include <wchar.h>
/* Straighforward implementation so tst-memstream3 could use check
fwrite on open_memstream. */
static size_t
fwwrite (const void *ptr, size_t size, size_t nmemb, FILE *arq)
{
const wchar_t *wcs = (const wchar_t*) (ptr);
for (size_t s = 0; s < size; s++)
{
for (size_t n = 0; n < nmemb; n++)
if (fputwc (wcs[n], arq) == WEOF)
return n;
}
return size * nmemb;
}
#define CHAR_T wchar_t
#define W(o) L##o
#define OPEN_MEMSTREAM open_wmemstream
#define PRINTF wprintf
#define FWRITE_FUNC fwwrite
libio: Multiple fixes for open_{w}memstram (BZ#18241 and BZ#20181) This patches fixes multiples issues on open_{w}memstream reported on both BZ#18241 and BZ#20181: - failed fseek does not set errno. - negative offset in fseek fails even when resulting position is a valid one. - a flush after write if the current write position is not at the end of the stream currupt data. The main fix is on seek operation for memstream (_IO_{w}str_seekoff), where both _IO_read_ptr and _IO_read_end pointer are updated if a write operation has occured (similar to default file operations). Also, to calculate the offset on both read and write pointers, a temporary value is instead of updating the argument supplied value. Negative offset are valid if resulting internal pointer is within the range of _IO_{read,write}_base and _IO_{read,write}_end. Also POSIX states that a null or wide null shall be appended to the current buffer iff a write moves the position to a value larger than the current lenght. Current implementation appends a null or wide null regardless of this condition. This patch fixes it by removing the 'else' condition on _IO_{w}mem_sync. Checked on x86_64. [BZ #18241] [BZ #20181] * libio/Makefile (test): Add tst-memstream3 and tst-wmemstream3. * libio/memstream.c (_IO_mem_sync): Only append a null byte if write position is at the end the buffer. * libio/wmemstream.c (_IO_wmem_sync): Likewise. * libio/strops.c (_IO_str_switch_to_get_mode): New function. (_IO_str_seekoff): Set correct offset from negative displacement and set EINVAL for invalid ones. * libio/wstrops.c (enlarge_userbuf): Use correct function to calculate buffer length. (_IO_wstr_switch_to_get_mode): New function. (_IO_wstr_seekoff): Set correct offset from negative displacement and set EINVAL for invalid ones. * libio/tst-memstream3.c: New file. * libio/tst-wmemstream3.c: Likewise. * manual/examples/memstrm.c: Remove warning when priting size_t.
2016-07-26 01:54:29 +08:00
#define FPUTC fputwc
#define STRCMP wcscmp
#include "tst-memstream3.c"