glibc/sysdeps/x86/fpu/test-fenv-sse-2.c

177 lines
5.0 KiB
C
Raw Normal View History

Handle more state in i386/x86_64 fesetenv (bug 16068). fenv_t should include architecture-specific floating-point modes and status flags. i386 and x86_64 fesetenv limit which bits they use from the x87 status and control words, when using saved state, and limit which parts of the state they set to fixed values, when using FE_DFL_ENV / FE_NOMASK_ENV. The following should be included but are excluded in at least some cases: status and masking for the "denormal operand" exception (which isn't part of FE_ALL_EXCEPT); precision control (explicitly mentioned in Annex F as something that counts as part of the floating-point environment); MXCSR FZ and DAZ bits (for FE_DFL_ENV and FE_NOMASK_ENV). This patch arranges for this extra state to be handled by fesetenv (and thereby by feupdateenv, which calls fesetenv). (Note that glibc functions using floating point are not generally expected to work correctly with non-default values of this state, especially precision control, but it is still logically part of the floating-point environment and should be handled as such by fesetenv. Changes to the state relating to subnormals ought generally to work with libm functions when the arguments aren't subnormal and neither are the expected results; that's a consequence of functions avoiding spurious internal underflows.) A question arising from this is whether FE_NOMASK_ENV should or should not mask the "denormal operand" exception. I decided it should mask that exception. This is the status quo - previously that exception could only be unmasked by direct manipulation of control registers (possibly via <fpu_control.h>). In addition, it means that use of FE_NOMASK_ENV leaves a floating-point environment the same as could be obtained by fesetenv (FE_DFL_ENV); feenableexcept (FE_ALL_EXCEPT);, rather than an environment in which an exception is unmasked that could only be masked again by using fesetenv with FE_DFL_ENV (or a previously saved environment) - this exception not being usable with other <fenv.h> functions because it's outside FE_ALL_EXCEPT. Tested for x86_64 and x86. [BZ #16068] * sysdeps/i386/fpu/fesetenv.c: Include <fpu_control.h>. (FE_ALL_EXCEPT_X86): New macro. (__fesetenv): Use FE_ALL_EXCEPT_X86 in most places instead of FE_ALL_EXCEPT. Ensure precision control is included in floating-point state. Ensure that FE_DFL_ENV and FE_NOMASK_ENV handle "denormal operand exception" and clear FZ and DAZ bits. * sysdeps/x86_64/fpu/fesetenv.c: Include <fpu_control.h>. (FE_ALL_EXCEPT_X86): New macro. (__fesetenv): Use FE_ALL_EXCEPT_X86 in most places instead of FE_ALL_EXCEPT. Ensure precision control is included in floating-point state. Ensure that FE_DFL_ENV and FE_NOMASK_ENV handle "denormal operand exception" and clear FZ and DAZ bits. * sysdeps/x86/fpu/test-fenv-sse-2.c: New file. * sysdeps/x86/fpu/test-fenv-x87.c: Likewise. * sysdeps/x86/fpu/Makefile [$(subdir) = math] (tests): Add test-fenv-x87 and test-fenv-sse-2. [$(subdir) = math] (CFLAGS-test-fenv-sse-2.c): New variable.
2015-10-29 06:58:29 +08:00
/* Test x86-specific floating-point environment (bug 16068): SSE part.
Copyright (C) 2015-2020 Free Software Foundation, Inc.
Handle more state in i386/x86_64 fesetenv (bug 16068). fenv_t should include architecture-specific floating-point modes and status flags. i386 and x86_64 fesetenv limit which bits they use from the x87 status and control words, when using saved state, and limit which parts of the state they set to fixed values, when using FE_DFL_ENV / FE_NOMASK_ENV. The following should be included but are excluded in at least some cases: status and masking for the "denormal operand" exception (which isn't part of FE_ALL_EXCEPT); precision control (explicitly mentioned in Annex F as something that counts as part of the floating-point environment); MXCSR FZ and DAZ bits (for FE_DFL_ENV and FE_NOMASK_ENV). This patch arranges for this extra state to be handled by fesetenv (and thereby by feupdateenv, which calls fesetenv). (Note that glibc functions using floating point are not generally expected to work correctly with non-default values of this state, especially precision control, but it is still logically part of the floating-point environment and should be handled as such by fesetenv. Changes to the state relating to subnormals ought generally to work with libm functions when the arguments aren't subnormal and neither are the expected results; that's a consequence of functions avoiding spurious internal underflows.) A question arising from this is whether FE_NOMASK_ENV should or should not mask the "denormal operand" exception. I decided it should mask that exception. This is the status quo - previously that exception could only be unmasked by direct manipulation of control registers (possibly via <fpu_control.h>). In addition, it means that use of FE_NOMASK_ENV leaves a floating-point environment the same as could be obtained by fesetenv (FE_DFL_ENV); feenableexcept (FE_ALL_EXCEPT);, rather than an environment in which an exception is unmasked that could only be masked again by using fesetenv with FE_DFL_ENV (or a previously saved environment) - this exception not being usable with other <fenv.h> functions because it's outside FE_ALL_EXCEPT. Tested for x86_64 and x86. [BZ #16068] * sysdeps/i386/fpu/fesetenv.c: Include <fpu_control.h>. (FE_ALL_EXCEPT_X86): New macro. (__fesetenv): Use FE_ALL_EXCEPT_X86 in most places instead of FE_ALL_EXCEPT. Ensure precision control is included in floating-point state. Ensure that FE_DFL_ENV and FE_NOMASK_ENV handle "denormal operand exception" and clear FZ and DAZ bits. * sysdeps/x86_64/fpu/fesetenv.c: Include <fpu_control.h>. (FE_ALL_EXCEPT_X86): New macro. (__fesetenv): Use FE_ALL_EXCEPT_X86 in most places instead of FE_ALL_EXCEPT. Ensure precision control is included in floating-point state. Ensure that FE_DFL_ENV and FE_NOMASK_ENV handle "denormal operand exception" and clear FZ and DAZ bits. * sysdeps/x86/fpu/test-fenv-sse-2.c: New file. * sysdeps/x86/fpu/test-fenv-x87.c: Likewise. * sysdeps/x86/fpu/Makefile [$(subdir) = math] (tests): Add test-fenv-x87 and test-fenv-sse-2. [$(subdir) = math] (CFLAGS-test-fenv-sse-2.c): New variable.
2015-10-29 06:58:29 +08:00
This file is part of the GNU C Library.
The GNU C Library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
The GNU C Library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with the GNU C Library; if not, see
Prefer https to http for gnu.org and fsf.org URLs Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '*.po' \ ! -name 'ChangeLog*' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-09-07 13:40:42 +08:00
<https://www.gnu.org/licenses/>. */
Handle more state in i386/x86_64 fesetenv (bug 16068). fenv_t should include architecture-specific floating-point modes and status flags. i386 and x86_64 fesetenv limit which bits they use from the x87 status and control words, when using saved state, and limit which parts of the state they set to fixed values, when using FE_DFL_ENV / FE_NOMASK_ENV. The following should be included but are excluded in at least some cases: status and masking for the "denormal operand" exception (which isn't part of FE_ALL_EXCEPT); precision control (explicitly mentioned in Annex F as something that counts as part of the floating-point environment); MXCSR FZ and DAZ bits (for FE_DFL_ENV and FE_NOMASK_ENV). This patch arranges for this extra state to be handled by fesetenv (and thereby by feupdateenv, which calls fesetenv). (Note that glibc functions using floating point are not generally expected to work correctly with non-default values of this state, especially precision control, but it is still logically part of the floating-point environment and should be handled as such by fesetenv. Changes to the state relating to subnormals ought generally to work with libm functions when the arguments aren't subnormal and neither are the expected results; that's a consequence of functions avoiding spurious internal underflows.) A question arising from this is whether FE_NOMASK_ENV should or should not mask the "denormal operand" exception. I decided it should mask that exception. This is the status quo - previously that exception could only be unmasked by direct manipulation of control registers (possibly via <fpu_control.h>). In addition, it means that use of FE_NOMASK_ENV leaves a floating-point environment the same as could be obtained by fesetenv (FE_DFL_ENV); feenableexcept (FE_ALL_EXCEPT);, rather than an environment in which an exception is unmasked that could only be masked again by using fesetenv with FE_DFL_ENV (or a previously saved environment) - this exception not being usable with other <fenv.h> functions because it's outside FE_ALL_EXCEPT. Tested for x86_64 and x86. [BZ #16068] * sysdeps/i386/fpu/fesetenv.c: Include <fpu_control.h>. (FE_ALL_EXCEPT_X86): New macro. (__fesetenv): Use FE_ALL_EXCEPT_X86 in most places instead of FE_ALL_EXCEPT. Ensure precision control is included in floating-point state. Ensure that FE_DFL_ENV and FE_NOMASK_ENV handle "denormal operand exception" and clear FZ and DAZ bits. * sysdeps/x86_64/fpu/fesetenv.c: Include <fpu_control.h>. (FE_ALL_EXCEPT_X86): New macro. (__fesetenv): Use FE_ALL_EXCEPT_X86 in most places instead of FE_ALL_EXCEPT. Ensure precision control is included in floating-point state. Ensure that FE_DFL_ENV and FE_NOMASK_ENV handle "denormal operand exception" and clear FZ and DAZ bits. * sysdeps/x86/fpu/test-fenv-sse-2.c: New file. * sysdeps/x86/fpu/test-fenv-x87.c: Likewise. * sysdeps/x86/fpu/Makefile [$(subdir) = math] (tests): Add test-fenv-x87 and test-fenv-sse-2. [$(subdir) = math] (CFLAGS-test-fenv-sse-2.c): New variable.
2015-10-29 06:58:29 +08:00
#include <cpuid.h>
#include <fenv.h>
#include <float.h>
#include <stdbool.h>
#include <stdint.h>
#include <stdio.h>
static bool
have_sse2 (void)
{
unsigned int eax, ebx, ecx, edx;
if (!__get_cpuid (1, &eax, &ebx, &ecx, &edx))
return false;
return (edx & bit_SSE2) != 0;
}
static uint32_t
get_sse_mxcsr (void)
{
uint32_t temp;
__asm__ __volatile__ ("stmxcsr %0" : "=m" (temp));
return temp;
}
static void
set_sse_mxcsr (uint32_t val)
{
__asm__ __volatile__ ("ldmxcsr %0" : : "m" (val));
}
static void
set_sse_mxcsr_bits (uint32_t mask, uint32_t bits)
{
uint32_t mxcsr = get_sse_mxcsr ();
mxcsr = (mxcsr & ~mask) | bits;
set_sse_mxcsr (mxcsr);
}
static int
test_sse_mxcsr_bits (const char *test, uint32_t mask, uint32_t bits)
{
uint32_t mxcsr = get_sse_mxcsr ();
printf ("Testing %s: mxcsr = %x\n", test, mxcsr);
if ((mxcsr & mask) == bits)
{
printf ("PASS: %s\n", test);
return 0;
}
else
{
printf ("FAIL: %s\n", test);
return 1;
}
}
#define MXCSR_FZ 0x8000
#define MXCSR_DAZ 0x40
#define MXCSR_DE 0x2
#define MXCSR_DM 0x100
static __attribute__ ((noinline)) int
sse_tests (void)
{
int result = 0;
fenv_t env1, env2;
/* Test FZ bit. */
fegetenv (&env1);
set_sse_mxcsr_bits (MXCSR_FZ, MXCSR_FZ);
fegetenv (&env2);
fesetenv (&env1);
result |= test_sse_mxcsr_bits ("fesetenv FZ restoration",
MXCSR_FZ, 0);
set_sse_mxcsr_bits (MXCSR_FZ, 0);
fesetenv (&env2);
result |= test_sse_mxcsr_bits ("fesetenv FZ restoration 2",
MXCSR_FZ, MXCSR_FZ);
set_sse_mxcsr_bits (MXCSR_FZ, MXCSR_FZ);
fesetenv (FE_NOMASK_ENV);
result |= test_sse_mxcsr_bits ("fesetenv (FE_NOMASK_ENV) FZ restoration",
MXCSR_FZ, 0);
set_sse_mxcsr_bits (MXCSR_FZ, MXCSR_FZ);
fesetenv (FE_DFL_ENV);
result |= test_sse_mxcsr_bits ("fesetenv (FE_DFL_ENV) FZ restoration",
MXCSR_FZ, 0);
/* Test DAZ bit. */
set_sse_mxcsr_bits (MXCSR_DAZ, MXCSR_DAZ);
fegetenv (&env2);
fesetenv (&env1);
result |= test_sse_mxcsr_bits ("fesetenv DAZ restoration",
MXCSR_DAZ, 0);
set_sse_mxcsr_bits (MXCSR_DAZ, 0);
fesetenv (&env2);
result |= test_sse_mxcsr_bits ("fesetenv DAZ restoration 2",
MXCSR_DAZ, MXCSR_DAZ);
set_sse_mxcsr_bits (MXCSR_DAZ, MXCSR_DAZ);
fesetenv (FE_NOMASK_ENV);
result |= test_sse_mxcsr_bits ("fesetenv (FE_NOMASK_ENV) DAZ restoration",
MXCSR_DAZ, 0);
set_sse_mxcsr_bits (MXCSR_DAZ, MXCSR_DAZ);
fesetenv (FE_DFL_ENV);
result |= test_sse_mxcsr_bits ("fesetenv (FE_DFL_ENV) DAZ restoration",
MXCSR_DAZ, 0);
/* Test DM bit. */
set_sse_mxcsr_bits (MXCSR_DM, 0);
fegetenv (&env2);
fesetenv (&env1);
result |= test_sse_mxcsr_bits ("fesetenv DM restoration",
MXCSR_DM, MXCSR_DM);
set_sse_mxcsr_bits (MXCSR_DM, MXCSR_DM);
fesetenv (&env2);
result |= test_sse_mxcsr_bits ("fesetenv DM restoration 2",
MXCSR_DM, 0);
set_sse_mxcsr_bits (MXCSR_DM, 0);
/* Presume FE_NOMASK_ENV should leave the "denormal operand"
exception masked, as not a standard exception. */
fesetenv (FE_NOMASK_ENV);
result |= test_sse_mxcsr_bits ("fesetenv (FE_NOMASK_ENV) DM restoration",
MXCSR_DM, MXCSR_DM);
set_sse_mxcsr_bits (MXCSR_DM, 0);
fesetenv (FE_DFL_ENV);
result |= test_sse_mxcsr_bits ("fesetenv (FE_DFL_ENV) DM restoration",
MXCSR_DM, MXCSR_DM);
/* Test DE bit. */
set_sse_mxcsr_bits (MXCSR_DE, MXCSR_DE);
fegetenv (&env2);
fesetenv (&env1);
result |= test_sse_mxcsr_bits ("fesetenv DE restoration",
MXCSR_DE, 0);
set_sse_mxcsr_bits (MXCSR_DE, 0);
fesetenv (&env2);
result |= test_sse_mxcsr_bits ("fesetenv DE restoration 2",
MXCSR_DE, MXCSR_DE);
set_sse_mxcsr_bits (MXCSR_DE, MXCSR_DE);
fesetenv (FE_NOMASK_ENV);
result |= test_sse_mxcsr_bits ("fesetenv (FE_NOMASK_ENV) DE restoration",
MXCSR_DE, 0);
set_sse_mxcsr_bits (MXCSR_DE, MXCSR_DE);
fesetenv (FE_DFL_ENV);
result |= test_sse_mxcsr_bits ("fesetenv (FE_DFL_ENV) DE restoration",
MXCSR_DE, 0);
return result;
}
static int
do_test (void)
{
if (!have_sse2 ())
{
puts ("CPU does not support SSE2, cannot test");
return 0;
}
return sse_tests ();
}
#define TEST_FUNCTION do_test ()
#include <test-skeleton.c>