gcc/libf2c/Makefile.in
Alexandre Oliva 90f86cb5d1 Makefile.in (AR, RANLIB): Add, for substitutions.
* Makefile.in (AR, RANLIB): Add, for substitutions.
(all-unilib, $(LIBG2C)): Depend on object lists, not
convenience libraries.
(s-libe77): Renamed from libE77.la; build object list.
(install): Do not move libraries to libdir.
(mostlyclean, clean): Adjust.
* libF77/Makefile.in (RANLIB): Add.
(LINK): Remove.
(../s-libf77): Renamed from ../libF77.la; build object list.
(../libfrtbegin.a): Remove target first.  Don't use $<.
(all, clean, distclean): Adjust.
* libF77/configure.in: Substitute RANLIB.
* libF77/configure: Rebuilt.
* libI77/Makefile.in (LINK): Delete.
(../s-libi77): Renamed from ../libI77.la; build object list.
(all, clean, distclean): Adjust.
* libU77/Makefile.in: Likewise.

From-SVN: r47605
2001-12-04 09:53:18 +00:00

273 lines
8.8 KiB
Makefile

# Makefile for GNU F77 compiler runtime.
# Copyright (C) 1995-1998, 2001 Free Software Foundation, Inc.
# Contributed by Dave Love (d.love@dl.ac.uk).
#
#This file is part of GNU Fortran.
#
#GNU Fortran is free software; you can redistribute it and/or modify
#it under the terms of the GNU General Public License as published by
#the Free Software Foundation; either version 2, or (at your option)
#any later version.
#
#GNU Fortran is distributed in the hope that it will be useful,
#but WITHOUT ANY WARRANTY; without even the implied warranty of
#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
#GNU General Public License for more details.
#
#You should have received a copy of the GNU General Public License
#along with GNU Fortran; see the file COPYING. If not, write to
#the Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA
#02111-1307, USA.
SHELL = /bin/sh
MAKEOVERRIDES=
#### Start of system configuration section. ####
srcdir = @srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@
target_alias = @target_alias@
gcc_version = @gcc_version@
gcc_version_trigger = @gcc_version_trigger@
top_builddir = .
libdir = $(exec_prefix)/lib
libsubdir = $(libdir)/gcc-lib/$(target_alias)/$(gcc_version)
#
# Versions should start at 0:0:0 - See libtool manual.
VERSION_MAJOR=0
VERSION_MINOR=0
VERSION_SUB=0
# Multilib support variables.
MULTISRCTOP =
MULTIBUILDTOP =
MULTIDIRS =
MULTISUBDIR =
MULTIDO = true
MULTICLEAN = true
# Not configured per top-level version, since that doesn't get passed
# Versions should start at 0:0:0 - See libtool manual.
# down at configure time, but overrridden by the top-level install
# target.
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
LIBTOOL = @LIBTOOL@
CC = @CC@
CFLAGS = @CFLAGS@
AR = @AR@
RANLIB = @RANLIB@
# List of variables to pass to sub-makes.
# Quote this way so that it can be used to set shell variables too.
FLAGS_TO_PASS= \
CC='$(CC)' \
LIBTOOL='$(LIBTOOL)' \
CFLAGS='$(CFLAGS)' \
CPPFLAGS='$(CPPFLAGS)' \
AR='$(AR)' \
RANLIB='$(RANLIB)' \
prefix='$(prefix)' \
exec_prefix='$(exec_prefix)' \
libdir='$(libdir)' \
libsubdir='$(libsubdir)' \
tooldir='$(tooldir)'
LIBG2C_BASE = libg2c
LIBG2C = $(LIBG2C_BASE).la
SUBDIRS = libI77 libF77 libU77
F2CEXT = abort derf derfc ef1asc ef1cmc erf erfc exit getarg getenv iargc \
signal system flush ftell fseek access besj0 besj1 besjn besy0 besy1 \
besyn chdir chmod ctime dbesj0 dbesj1 dbesjn dbesy0 dbesy1 dbesyn \
dtime etime fdate fgetc fget flush1 fnum fputc fput fstat gerror \
getcwd getgid getlog getpid getuid gmtime hostnm idate ierrno irand \
isatty itime kill link lnblnk lstat ltime mclock perror rand rename \
secnds second sleep srand stat symlnk time ttynam umask unlink \
vxttim alarm \
date_y2kbuggy date_y2kbug vxtidt_y2kbuggy vxtidt_y2kbug
.SUFFIXES:
# The logic here is partly dictated by the desire to keep the lib?77
# subdirs for compatibility with the Netlib version and because libU77
# has a different copyright; then the libe77 bit (EXTERNALly-callable
# versions) is funny. Given that, as well as keeping things as simple
# as possible we want (at least) the following:
# * Allow make to be run at the top level (all-target-libf2c), at this
# level, or the subdirs of this level. In the latter case we only
# compile, rather than updating libg2c.a;
# * A robust set of dependencies, so that we rebuild (as little as
# possible) if a configuration file, g2c.h or any lib?77/*.c file
# changes;
# * Avoid unnecessary running of ar and ranlib;
# * Expose parallelism where reasonable, but not as a priority.
# The intended top-level target here does a non-multilib build (via
# the dependency) and then (perhaps) builds multilibs.
all: all-unilib
$(MULTIDO) $(FLAGS_TO_PASS) multi-do DO="all-unilib"
# `all-unilib' is the overall target in the absence of multilibs,
# meant to be invoked via multi-do for multilibs.
# Its dependencies can be satisfied in parallel. The [fiu]77 targets
# update stamp files (object file lists, actually, see the subdir
# makefiles) on which the $(LIBG2C) depends. The stamp files
# s-lib[fiu]77 are intentionally not targets, since we're only meant
# to come in at the level of this target. The [fiu]77 targets always
# invoke sub makes to check dependencies in the subdirs, else we'd
# have to maintain them at this level; we live with the overhead of
# some recursive makes which may do nothing.
all-unilib: i77 f77 u77 s-libe77
$(MAKE) $(FLAGS_TO_PASS) $(LIBG2C)
i77 f77 u77: g2c.h
# This target should normally only get invoked via `all-unilib' --
# after all's well in the subdirs -- actually to assemble the library.
# The stamp files contain the object lists of each component of the
# library. The point of breaking them up is to avoid command-line
# length limitations.
$(LIBG2C): s-libi77 s-libf77 s-libu77 s-libe77
$(LIBTOOL) --mode=link $(CC) -o $@ \
-version-info $(VERSION_MAJOR):$(VERSION_MINOR):$(VERSION_SUB) \
-rpath $(prefix)/lib \
-objectlist s-libe77 \
-objectlist s-libf77 \
-objectlist s-libi77 \
-objectlist s-libu77 \
-lc -lm
i77:
cd libI77; $(MAKE) $(FLAGS_TO_PASS) all
f77:
cd libF77; $(MAKE) $(FLAGS_TO_PASS) all
u77:
cd libU77; $(MAKE) $(FLAGS_TO_PASS) all
s-libe77: f2cext.c
if [ -d libE77 ]; then rm -f libE77/*.o libE77/*.lo; else mkdir libE77; fi
-rm -f $@.T $@
for name in $(F2CEXT); \
do \
echo $${name}; \
$(LIBTOOL) --mode=compile $(CC) -c -I. -I$(srcdir) -I../../include \
$(CPPFLAGS) $(CFLAGS) -DL$${name} $(srcdir)/f2cext.c \
-o libE77/L$${name}.lo ; \
if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
echo libE77/L$${name}.lo >> $@.T; \
done
mv $@.T $@
f2cext.c: g2c.h
${srcdir}/configure: configure.in
rm -f config.cache
cd $(srcdir) && autoconf
# Dependence on Makefile serializes for parallel make.
g2c.h: g2c.hin config.status Makefile
# Might try to avoid rebuilding everything if Makefile or configure
# changes and g2c.h doesn't; see also the Makefile rule. Should
# depend on another stamp file rather than using the commented-out
# lines below, since g2c.h isn't necessarily brought up to date.
# mv g2c.h g2c.x
$(SHELL) config.status
# $(SHELL) $(srcdir)/../move-if-change g2c.h g2c.x && mv g2c.x g2c.h
Makefile: Makefile.in config.status
# Autoconf doc uses `./config.status'. Is there a good reason to use $(SHELL)?
$(SHELL) config.status
config.status: configure $(gcc_version_trigger)
# Make sure we don't pick up a site config file and that configure
# gets run with correct values of variables such as CC.
CONFIG_SITE=no-such-file $(FLAGS_TO_PASS) \
$(SHELL) config.status --recheck
info install-info clean-info dvi TAGS dist installcheck installdirs:
check:
cd libU77; $(MAKE) G77DIR=../../../gcc/ check
install: all
$(LIBTOOL) --mode=install $(INSTALL_DATA) $(LIBG2C) $(libsubdir)/$(MULTISUBDIR)
$(INSTALL_DATA) libfrtbegin.a $(libsubdir)/$(MULTISUBDIR)
$(RANLIB) $(libsubdir)/$(MULTISUBDIR)/libfrtbegin.a
$(INSTALL_DATA) g2c.h $(libsubdir)/include/g2c.h
@if [ -f f2c-install-ok -o -f $(srcdir)/f2c-install-ok ]; then \
echo ''; \
echo 'Warning: g77 no longer installs libf2c.a or f2c.h.'; \
echo ' You must do so yourself. For more information,'; \
echo ' read "Distributing Binaries" in the g77 docs.'; \
echo ' (To turn off this warning, delete the file'; \
echo ' f2c-install-ok in the source or build directory.)'; \
echo ''; \
else true; fi
$(MULTIDO) $(FLAGS_TO_PASS) multi-do DO="$@"
@-$(LIBTOOL) --mode=finish $(prefix)/lib
install-strip:
$(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' install
uninstall:
rm -f $(libsubdir)/$(MULTISUBDIR)/include/g2c.h $(libsubdir)/$(MULTISUBDIR)/$(LIBG2C_BASE).*
rm -f $(prefix)/lib/$(LIBG2C_BASE).so*
$(MULTIDO) $(FLAGS_TO_PASS) multi-do DO="$@"
mostlyclean:
rm -f $(LIBG2C) objlist
$(MAKE) DO=$@ DODIRS="$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do; \
$(MULTICLEAN) multi-clean DO=$@
rm -fr libE77 s-libe77
clean: mostlyclean
rm -f config.log
$(MAKE) DO=$@ DODIRS="$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do; \
$(MULTICLEAN) multi-clean DO=$@
rm -rf .libs
distclean: clean
rm -f g2c.h s-libe77
$(MAKE) DO=$@ DODIRS="$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do; \
$(MULTICLEAN) multi-clean DO=distclean
rm -f config.cache config.status Makefile
maintainer-clean:
rebuilt: configure
.PHONY: rebuilt mostlyclean clean distclean maintainer-clean all \
i77 f77 u77 check uninstall install-strip dist \
installcheck installdirs all-unilib
subdir_do:
@rootpre=`pwd`/; export rootpre; \
srcrootpre=`cd $(srcdir); pwd`/; export srcrootpre; \
for i in .. $(DODIRS); do \
if [ x$$i != x.. ]; then \
if [ -f ./$$i/Makefile ]; then \
if (cd ./$$i; $(MAKE) $(FLAGS_TO_PASS) $(DO)); then \
true; \
else \
exit 1; \
fi; \
else true; fi; \
else true; fi; \
done
# multidoings may be added here by configure.