gcc/gcc/longlong.h
Alexandre Oliva fa5322fa58 Contribute sh64-elf.
2002-02-09  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.c (TARGET_CANNOT_MODIFY_JUMPS_P): Define to...
(sh_cannot_modify_jumps_p): New function.
2002-02-05  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.c (TARGET_MS_BITFIELD_LAYOUT_P): Define to...
(sh_ms_bitfield_layout_p): New function.
2002-02-04  Alexandre Oliva  <aoliva@redhat.com>
	    Zack Weinberg  <zack@codesourcery.com>
* config/sh/sh.h (TRAMPOLINE_ADJUST_ADDRESS): Use
expand_simple_binop instead of expand_binop.
2002-02-03  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.h (OVERRIDE_OPTIONS) [! TARGET_SH5]: Disable
use of .quad and .uaquad.
* config/sh/sh.c (TARGET_ASM_UNALIGNED_DI_OP,
TARGET_ASM_ALIGNED_DI_OP): Add comment pointing to the above.
2002-01-24  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.md (movdi_const, movdi_const_32bit,
movdi_const_16bit): Make sure all CONSTs have modes.
(sym2PIC): Ditto, but by adjusting all callers.
* config/sh/sh.c (calc_live_regs) [TARGET_SHCOMPACT]: Set pr_live
if the prologue calls the SHmedia argument decoder or register
saver.
2002-01-24  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.c (TARGET_ASM_UNALIGNED_DI_OP): Define.
(TARGET_ASM_ALIGNED_DI_OP): Likewise.
(sh_expand_epilogue): Don't emit USE of return target register.
(prepare_move_operands): Legitimize DImode PIC addresses.
(sh_media_register_for_return): Skip tr0, used to initialize the
PIC register.
(sh_expand_prologue): Remove explicit USE of return register.
(nonpic_symbol_mentioned_p): PC is non-PIC.  Don't recurse in
CONST_DOUBLEs.  UNSPEC_GOTPLT is PIC.
* config/sh/sh.h (ASM_OUTPUT_DOUBLE_INT): Removed, obsolete.
(OVERRIDE_OPTIONS): Don't disable PIC on SH5.
(EXTRA_CONSTRAINT_S): Use MOVI_SHORI_BASE_OPERAND_P instead of
EXTRA_CONSTRAINT_T.
(GOT_ENTRY_P, GOTPLT_ENTRY_P, GOTOFF_P, PIC_ADDR_P): New.
(MOVI_SHORI_BASE_OPERAND_P): New.
(NON_PIC_REFERENCE_P, PIC_REFERENCE_P): New.
(EXTRA_CONSTRAINT_T): Define in terms of them.
(OUTPUT_ADDR_CONST_EXTRA): Handle UNSPEC_GOTPLT.
* config/sh/sh.md (movsi_media, movsi_media_nofpu,
movdi_media, movdi_media_nofpu): Add SIBCALL_REGS class to
alternatives supporting TARGET_REGS.
(UNSPEC_GOTPLT): New constant.
(movdi split): Move incrementing of LABEL_NUSES...
(movdi_const, movdi_const_32bit): Here.  Use
MOVI_SHORI_BASE_OPERAND_P instead of EXTRA_CONSTRAINT_T.
(movdi_const_16bit): New.
(call, call_value) [flag_pic]: Use GOTPLT.
(call_pop, call_value_pop): New expands.
(call_pop_compact, call_pop_rettramp): New insns.
(call_value_pop_compact, call_value_pop_rettramp): New insns.
(sibcall) [flag_pic]: Use GOT.
(builtint_setjmp_receiver): Remove bogus, unused expand.
(GOTaddr2picreg): Implement for SHcompact and SHmedia.
(*pt, *ptb, ptrel): New insns.
(sym2GOT): Handle DImode GOT.
(sym2GOTPLT, symGOTPLT2reg): New expands.
(sym2PIC): New expand.
(shcompact_return_tramp): Use GOTPLT to return trampoline.
(shcompact_return_tramp_i): Use return register explicitly.
* config/sh/sh.h (OVERRIDE_OPTIONS) [TARGET_SHMEDIA]: Don't
disable flag_reorder_blocks.
2002-01-19  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.md (sibcall_compact): Reorder return, uses and
clobbers, for clarity.
(sibcall_epilogue) [TARGET_SHCOMPACT]: Mark saving and
restoring of r0 in macl as MAYBE_DEAD.
2002-01-18  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.h (LONG_DOUBLE_TYPE_SIZE): Define.
* config/sh/sh.md (movv4sf_i, movv16sf_i): Fix uses of
alter_subreg all over.
(jump) [TARGET_SHMEDIA]: FAIL to create new jumps after
reload, instead of emitting instructions that would require
reloading.
(casesi_load_media): Add missing modes.
2001-11-09  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.c (sh_expand_prologue): Mark the PIC register
as used if the argument decoder is called.
2001-08-28  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.md (udivsi3, divsi3): Load libcall symbol name in
Pmode, then extend it to DImode if necessary.
2001-08-28  Stephen Clarke  <Stephen.Clarke@st.com>
* config/sh/sh.h (LEGITIMATE_CONSTANT_P): Don't accept DFmode
constants in FPU-enabled SHmedia, let them be loaded from memory.
2001-08-28  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.md (cmpeqdi_media, cmpgtdi_media, cmpgtudi_media):
Adjust whitespace in assembly output templates.
2001-08-28  Stephen Clarke  <Stephen.Clarke@st.com>
* config/sh/sh.md (movdicc_false, movdicc_true, movdicc): Adjust
mode of if_then_else.
2001-08-04  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh64.h (CPP_DEFAULT_CPU_SPEC): Override definition in
sh.h.
2001-07-26  Andrew Haley  <aph@cambridge.redhat.com>
	    Joern Rennecke <amylaar@redhat.com>
* config/sh/sh64.h (CPP_DEFAULT_CPU_SPEC): New.
(SUBTARGET_CPP_PTR_SPEC): New.
(SUBTARGET_CPP_SPEC): Remove.
2001-07-06  Chandrakala Chavva  <cchavva@redhat.com>
* config/sh/sh.md (movsf_media_nofpu+1, movdf_media_nofpu+1):
Fix typo in previous checkin.
2001-07-11  Chandrakala Chavva  <cchavva@redhat.com>
* config/sh/sh.h (MODES_TIEABLE_P): Fix redact indentations.
2001-07-10  Chandrakala Chavva  <cchavva@cygnus.com>
	    Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.h (MODES_TIEABLE_P): Don't tie modes wider than
what single FP register can hold for SHmedia target.
2001-07-06  Chandrakala Chavva  <cchavva@redhat.com>
	    Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.md (movsf_media_nofpu+1, movdf_media_nofpu+1):
Do not split into SUBREG.
2001-06-14  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/ushmedia.h, config/sh/sshmedia.h: Updated signatures
and added new functions as specified in SH5 ABI r9.
2001-06-04  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/lib1funcs.asm (GCC_nested_trampoline): Align to an
8-byte boundary.
2001-06-03  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.c (dump_table): Add const0_rtx in calls of
gen_consttable_4 and gen_consttable_8.  Emit multiple labels
and consttable_window_ends.
2001-06-03  Graham Stott  <grahams@redhat,com>
* config/sh/sh.md (movdi split): Remove unused variable last_insn.
2001-05-16  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.c (print_operand): Handle floating-point pair,
vector and matrix registers.
* config/sh/sh.h (REGISTER_MOVE_COST): Take floating-pointer
vector modes into account.
* config/sh/sh.md (movv2sf): Split move between registers into
movdf.
(movv4sf, movv16sf): Introduce insns that get split only after
reload.
* config/sh/shmedia.h: Fix Copyright dates.
* config/sh/ushmedia.h: Likewise.  Move loop counter
declarations into conditionals that uses them.
(sh_media_FVADD_S, sh_media_FVSUB_S): Fix off-by-one error in
loop boundary.
* config/sh/sshmedia.h: Fix Copyright dates.
(sh_media_PUTCFG): Fix constraints.
2001-05-12  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.h (TARGET_PTRMEMFUNC_VBIT_LOCATION): Define to
ptrmemfunc_vbit_in_delta for SH5.
2001-05-08  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.h (TARGET_SWITCHES): Document -m5-*.
* invoke.texi: Likewise.
2001-04-14  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/lib1funcs.asm (GCC_push_shmedia_regs,
GCC_push_shmedia_regs_nofpu, GCC_pop_shmedia_regs,
GCC_pop_shmedia_regs_nofpu): New global symbols.
* config/sh/t-sh64 (LIB1ASMFUNCS): Add them.
* config/sh/sh.h (SHMEDIA_REGS_STACK_ADJUST): New macro.
* config/sh/sh.c (calc_live_regs): Account for PR's saving in
compact function with nonlocal labels.
(sh_expand_prologue) [SHcompact]: Push SHmedia regs if needed.
(sh_expand_epilogue) [SHcompact]: Pop them when appropriate.
(initial_elimination_offset): Account for their stack space.
* config/sh/sh.md (shmedia_save_restore_regs_compact): New insn.
* config/sh/sh.md (movsi_media, movsi_media_nofpu, movqi_media,
movhi_media, movdi_media, movdi_media_nofpu, movdf_media,
movdf_media_nofpu, movsf_media, movsf_media_nofpu): Require at
least one of the operands to be a register.
(movv2sf): Likewise.  Renamed to movv2sf_i.
(movdi, movdf, movv2sf, movv4sf, movv16sf, movsf):
prepare_move_operands() before emitting SHmedia insns.
2001-04-03  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/crti.asm (init, fini) [__SH5__ && ! __SHMEDIA__]:
Don't save nor initialize r12.  Don't mis-align the stack.
Pad the code with a nop.
* config/sh/crti.asm: Don't restore r12.  Don't mis-align the
stack.
2001-03-13  Alexandre Oliva  <aoliva@redhat.com>
* gcc/longlong.h (__umulsidi3, count_leading_zeros)
[__SHMEDIA__]: Implement.
2001-03-11  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.md: Set latency of `pt' closer to reality.
(movsi_media, movsi_media_nofpu, movdi_media, movdi_media_nofpu,
movdf_media, movdf_media_nofpu, movsf_media, movsf_media_nofpu):
Set move, load and store type attributes.
* config/sh/sh.c (sh_loop_align) [TARGET_SH5]: Set to 3.
* config/sh/sh.h (OVERRIDE_OPTIONS) [TARGET_SH5]: Disable
profiling.
* config/sh/sh.h (PROMOTE_MODE): Sign-extend SImode to DImode.
* config/sh/sh-protos.h (sh_media_register_for_return): Declare.
* config/sh/sh.c (sh_media_register_for_return): New function.
(sh_expand_prologue) [TARGET_SHMEDIA]: Copy r18 to an available
branch-target register.
(sh_expand_epilogue) [TARGET_SHMEDIA]: Explicitly USE it.
* config/sh/sh.md (return_media_i): Use any call-clobbered
branch-target register.
(return_media): If r18 wasn't copied in the prologue, copy it
here.
* config/sh/sh.h (CONDITIONAL_REGISTER_USAGE) [TARGET_SHMEDIA]:
Clear class FP0_REGS.
* config/sh/sh64.h (LINK_SPEC): Removed incorrect default copied
from elf.h.
2001-03-08  DJ Delorie  <dj@redhat.com>
* config/sh/sh.h (OVERRIDE_OPTIONS): Disable relaxing for SHMEDIA.
2001-02-09  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.md (sibcall_compact): Set fp_mode to single.
2001-02-07  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.h (INT_ASM_OP) [SHMEDIA64]: Use `.quad'.
2001-02-03  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.h (INIT_CUMULATIVE_ARGS): Compute size of BLKmode
return value correctly for call_cookie.
2001-02-01  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/crt1.asm (start): Modified so as to call
___setup_argv_and_call_main.
2001-01-26  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.h (FUNCTION_ARG_ADVANCE): Don't count stack_regs in
SHmedia mode.
2001-01-20  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.h (STRIP_DATALABEL_ENCODING): New macro.
(STRIP_NAME_ENCODING): Use it.
(ASM_OUTPUT_LABELREF): Likewise.  Don't call assemble_name().
2001-01-19  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.md (sgeu) [! SHMEDIA]: Fix invocation of
prepare_scc_operands().
* config/sh/sh.h (SH_DATALABEL_ENCODING): Change to "#"...
(DATALABEL_SYMNAME_P): ... so that we don't need memcmp here.
2001-01-17  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.h (STRIP_NAME_ENCODING): Strip leading `*'.
2001-01-13  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.md (shcompact_incoming_args): Use R0_REG.
* config/sh/sh.md (R7_REG, R8_REG, R9_REG): Define as constants,
used in shcompact_incoming_args.
* config/sh/sh.c (sh_expand_epilogue): Fix thinko in previous
change.
* config/sh/crt1.asm (start) [SH5]: Switch to single-precision
mode.
* config/sh/lib1funcs.asm (sdivsi3_i4, udivsi3_i4, set_fpscr):
Adjust accordingly.
* config/sh/sh.c (sh_expand_prologue, sh_expand_epilogue):
Simplify.  Adjust.  Add sanity check.
* config/sh/sh.h (TARGET_SWITCHES) [5-compact]: Set
FPU_SINGLE_BIT.
* config/sh/sh.md (udivsi3_i4_single, divsi3_i4_single): Match
TARGET_SHCOMPACT.
(udivsi3, divsi3): Use them.
(force_mode_for_call): New insn.
(call, call_value, sibcall_value): Emit it before SHcompact
calls.
2001-01-11  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.md (call, call_value, sibcall): Make sure the
call cookie is non-NULL before taking its value.
2001-01-10  Alexandre Oliva  <aoliva@redhat.com>
* config.gcc (sh64): Set target_requires_64bit_host_wide_int.
2001-01-09  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.md (shcompact_incoming_args): Set argument memory
block.
* config/sh/sh.h (STATIC_CHAIN_REGNUM) [SH5]: Use r1.
* config/sh/sh.c (sh_expand_prologue) [SH5]: Use r0 as
temporary for stack adjusts.  Use MACL and MACH to pass
arguments to shcompact_incoming_args.
* config/sh/sh.md (shcompact_incoming_args): Adjust.  Don't
clobber r1.
* config/sh/lib1funcs.asm (shcompact_incoming_args): Likewise.
(nested_trampoline): Load static chain address into r1.
* config/sh/sh.md (movdi_media splits): Fix sign-extension.
2001-01-07  Alexandre Oliva  <aoliva@redhat.com
* config/sh/sh.c (fpul_operand) [SHMEDIA]: Just call
fp_arith_reg_operand().
2001-01-06  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.md (casesi): Sign-extend the first two operands,
and use signed compares for them.
* config/sh/sh.c (dump_table): Don't emit 8-byte constants after
4-byte ones.  Instead, inter-leave them, maintaining the 8-byte
ones properly aligned.
(find_barrier): Account for extra alignment needed for 8-byte wide
constants.
(machine_dependent_reorg): Require a label for the second 4-byte
constant after an 8-byte one.
* config/sh/lib1funcs.asm (sdivsi3): Fix typo in yesterday's
change.
2001-01-05  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.c (machine_dependent_reorg) [SHCOMPACT]: Reset
last_float when switching float modes.
* config/sh/sh.md (movdf) [SH5]: Don't use stack-pointer
auto-increment for general-purpose registers.
* config/sh/lib1funcs.asm (sdivsi3) [SHMEDIA]: Sign-extend the
result.
* config/sh/sh.c (sh_expand_prologue) [SH5]: Use r1 as temporary
for stack adjust.
* config/sh/sh.c (sh_builtin_saveregs): Support using all
registers for varargs.
2001-01-01  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.h (FUNCTION_ARG_ADVANCE): Simplify.
* config/sh/sh.h (CALL_COOKIE_STACKSEQ,
CALL_COOKIE_STACKSEQ_SHIFT, CALL_COOKIE_STACKSEQ_GET): New macros.
(CALL_COOKIE_INT_REG_SHIFT): Adjust.
(FUNCTION_ARG_ADVANCE): Use SHCOMPACT_FORCE_ON_STACK.  Adjust
call_cookie accordingly.
(FUNCTION_ARG): Test SHCOMPACT_FORCE_ON_STACK.
(SHCOMPACT_BYREF): Likewise.
(SHCOMPACT_FORCE_ON_STACK): New macro.
* config/sh/sh.c (sh_expand_prologue): Use new call_cookie format.
(sh_builtin_saveregs): Likewise.
* config/sh/lib1funcs.asm (shcompact_call_trampoline,
shcompact_incoming_args): Use new shift values.  Support
sequences of consecutive and non-consecutive pushes/pops.
* config/sh/sh.md (return): Don't explicitly use PR_REG.
2001-01-05  Hans-Peter Nilsson  <hpn@cygnus.com>
* config/sh/sh.h (TEXT_SECTION): Define.
* config/sh/elf.h (ASM_FILE_START): Output TEXT_SECTION_ASM_OP.
2001-01-05  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.h (INIT_CUMULATIVE_LIBCALL_ARGS): New macro.
* config/sh/sh.h (BASE_RETURN_VALUE_REG): Use FP regs for
return values on FPU-enabled SHmedia.
(FUNCTION_VALUE_REGNO_P): Mark FIRST_FP_RET_REG as used on
FPU-enabled SHmedia.
(INIT_CUMULATIVE_ARGS): Set up return trampoline only if
value is returned in a non-FP reg and is not returned by
reference.
* config/sh/sh.md (shcompact_return_tramp_i): Change type to
jump_ind.
2000-01-04  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.h (SH_MIN_ALIGN_FOR_CALLEE_COPY): New.
(FUNCTION_ARG_CALLEE_COPIES): Require argument to be
quad-aligned to be passed by callee-copy reference.
2001-01-03  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/elf.h (MAX_WCHAR_TYPE_SIZE): Define.
* config/sh/sh64.h (MAX_WCHAR_TYPE_SIZE): Undefine.
2001-01-02  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/lib1funcs.asm (shcompact_call_trampoline): Fix error in
copying low-numbered FP regs to r7 and r8.
* config/sh/sh.h (FUNCTION_ARG_ADVANCE): Don't request copying of
FP regs to general-purpose regs only if the copy was passed on the
stack.
* config/sh/lib1funcs.asm (shcompact_call_trampoline): Fix typo in
copying FP reg to r9.
* config/sh/sh.h (FUNCTION_ARG_ADVANCE): Use trampoline to
copy FP regs to general-purpose regs only in outgoing calls.
* config/sh/sh.md (movdf_media, movsf_media): Revert incorrect
change from 	2000-10-30.  Adjust for 64-bit (or 32-bit)
HOST_WIDE_INT.
* config/sh/sh.h (struct sh_args): Document all fields.
(FUNCTION_OK_FOR_SIBCALL): Functions that receive arguments
passed partially on the stack should not consider making
sibcalls.
* config/sh/sh.h (FUNCTION_ARG_ADVANCE): Add byref regs to
stack_regs only for incoming calls.  When passing FP args,
make sure there are FP regs available before modifying
call_cookie.
(SHCOMPACT_BYREF): Pass double args in general-purpose
registers by reference.
2000-12-30  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.h (FUNCTION_OK_FOR_SIBCALL) [SHCOMPACT]: Don't
attempt to generate sibcalls if the caller got any arguments
by reference.
* config/sh/lib1funcs.asm (set_fpscr) [SH5]: Default to double.
* config/sh/sh.c (dump_table) [SHCOMPACT]: Align DImode and DFmode
to 8-byte boundaries.
* config/sh/sh.md (shcompact_preserve_incoming_args): New insn.
* config/sh/sh.h (CALL_COOKIE_INT_REG_GET): New macro.
* config/sh/sh.c (sh_expand_prologue): Preserve args that will be
stored in the stack.
* config/sh/lib1funcs.asm (ct_main_table, ia_main_table): Arrange
for the offsets to have the ISA bit set.
(shcompact_call_trampoline): Document.  Swap r0 and r1, to match
invocation.  Use beq instead of bgt to mark end of sequence of
loads.
(shcompact_incoming_args): Fix store of r2.  Use beq instead of
bgt to mark end of sequence of stores.
* config/sh/sh.c (arith_operand): Don't check whether
CONST_OK_FOR_J for now.
* config/sh/sh.md (movdf_media, movsf_media): Use HOST_WIDE_INT
instead of long for conversion.
2000-12-29  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.c (print_operand_address): Convert INTVAL to int
before passing it to fprintf.
2000-12-28  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/crt1.asm (start): Reset SR.FD, to enable the FP unit.
Call set_fpscr before reading/writing SR.
* config/sh/crt1.asm (start): Set SR.SZ and SR.PR, but not SR.FR.
Call set_fpscr.
* config/sh/lib1funcs.asm: Add `.align 2' directives before
SHmedia code.
(FMOVD_WORKS): Define on SH5 with FPU.
(set_fpscr): Define on SH5.  Remove separate _fpscr_values
setting.
* config/sh/t-sh64 (LIB1ASMFUNCS): Add _set_fpscr instead of
_fpscr_values.
2000-12-28  Hans-Peter Nilsson  <hpn@cygnus.com>
* config/sh/lib1funcs.asm (ct_main_table): Align contents to even
address.
(ia_main_table): Ditto.
2000-12-27  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.h (MAX_WCHAR_TYPE_SIZE): Don't define.
* config/sh/sh64.h (WCHAR_TYPE, WCHAR_TYPE_SIZE): Reinstate
the definitions from sh.h.
* config/sh/sh.h (PTRDIFF_TYPE): Define as conditional on
TARGET_SH5.
(SUBTARGET_CPP_SPEC): Arrange for __PTRDIFF_TYPE__ to be defined.
* config/sh/elf.h (PTRDIFF_TYPE): Likewise.
* config/sh/sh64.h (SUBTARGET_CPP_SPEC): Likewise.
2000-12-26  Alexandre Oliva  <aoliva@redhat.com>
* config/sh/sh.md (movdi_media split): Don't add REG_LABEL notes.
Increment LABEL_NUSES.

From-SVN: r49630
2002-02-09 03:08:08 +00:00

1504 lines
49 KiB
C

/* longlong.h -- definitions for mixed size 32/64 bit arithmetic.
Copyright (C) 1991, 1992, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Free Software Foundation, Inc.
This definition file is free software; you can redistribute it
and/or modify it under the terms of the GNU General Public
License as published by the Free Software Foundation; either
version 2, or (at your option) any later version.
This definition file is distributed in the hope that it will be
useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
/* You have to define the following before including this file:
UWtype -- An unsigned type, default type for operations (typically a "word")
UHWtype -- An unsigned type, at least half the size of UWtype.
UDWtype -- An unsigned type, at least twice as large a UWtype
W_TYPE_SIZE -- size in bits of UWtype
UQItype -- Unsigned 8 bit type.
SItype, USItype -- Signed and unsigned 32 bit types.
DItype, UDItype -- Signed and unsigned 64 bit types.
On a 32 bit machine UWtype should typically be USItype;
on a 64 bit machine, UWtype should typically be UDItype.
*/
#define __BITS4 (W_TYPE_SIZE / 4)
#define __ll_B ((UWtype) 1 << (W_TYPE_SIZE / 2))
#define __ll_lowpart(t) ((UWtype) (t) & (__ll_B - 1))
#define __ll_highpart(t) ((UWtype) (t) >> (W_TYPE_SIZE / 2))
#ifndef W_TYPE_SIZE
#define W_TYPE_SIZE 32
#define UWtype USItype
#define UHWtype USItype
#define UDWtype UDItype
#endif
/* Define auxiliary asm macros.
1) umul_ppmm(high_prod, low_prod, multipler, multiplicand) multiplies two
UWtype integers MULTIPLER and MULTIPLICAND, and generates a two UWtype
word product in HIGH_PROD and LOW_PROD.
2) __umulsidi3(a,b) multiplies two UWtype integers A and B, and returns a
UDWtype product. This is just a variant of umul_ppmm.
3) udiv_qrnnd(quotient, remainder, high_numerator, low_numerator,
denominator) divides a UDWtype, composed by the UWtype integers
HIGH_NUMERATOR and LOW_NUMERATOR, by DENOMINATOR and places the quotient
in QUOTIENT and the remainder in REMAINDER. HIGH_NUMERATOR must be less
than DENOMINATOR for correct operation. If, in addition, the most
significant bit of DENOMINATOR must be 1, then the pre-processor symbol
UDIV_NEEDS_NORMALIZATION is defined to 1.
4) sdiv_qrnnd(quotient, remainder, high_numerator, low_numerator,
denominator). Like udiv_qrnnd but the numbers are signed. The quotient
is rounded towards 0.
5) count_leading_zeros(count, x) counts the number of zero-bits from the
msb to the first non-zero bit in the UWtype X. This is the number of
steps X needs to be shifted left to set the msb. Undefined for X == 0,
unless the symbol COUNT_LEADING_ZEROS_0 is defined to some value.
6) count_trailing_zeros(count, x) like count_leading_zeros, but counts
from the least significant end.
7) add_ssaaaa(high_sum, low_sum, high_addend_1, low_addend_1,
high_addend_2, low_addend_2) adds two UWtype integers, composed by
HIGH_ADDEND_1 and LOW_ADDEND_1, and HIGH_ADDEND_2 and LOW_ADDEND_2
respectively. The result is placed in HIGH_SUM and LOW_SUM. Overflow
(i.e. carry out) is not stored anywhere, and is lost.
8) sub_ddmmss(high_difference, low_difference, high_minuend, low_minuend,
high_subtrahend, low_subtrahend) subtracts two two-word UWtype integers,
composed by HIGH_MINUEND_1 and LOW_MINUEND_1, and HIGH_SUBTRAHEND_2 and
LOW_SUBTRAHEND_2 respectively. The result is placed in HIGH_DIFFERENCE
and LOW_DIFFERENCE. Overflow (i.e. carry out) is not stored anywhere,
and is lost.
If any of these macros are left undefined for a particular CPU,
C macros are used. */
/* The CPUs come in alphabetical order below.
Please add support for more CPUs here, or improve the current support
for the CPUs below!
(E.g. WE32100, IBM360.) */
#if defined (__GNUC__) && !defined (NO_ASM)
/* We sometimes need to clobber "cc" with gcc2, but that would not be
understood by gcc1. Use cpp to avoid major code duplication. */
#if __GNUC__ < 2
#define __CLOBBER_CC
#define __AND_CLOBBER_CC
#else /* __GNUC__ >= 2 */
#define __CLOBBER_CC : "cc"
#define __AND_CLOBBER_CC , "cc"
#endif /* __GNUC__ < 2 */
#if (defined (__a29k__) || defined (_AM29K)) && W_TYPE_SIZE == 32
#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
__asm__ ("add %1,%4,%5\n\taddc %0,%2,%3" \
: "=r" ((USItype) (sh)), \
"=&r" ((USItype) (sl)) \
: "%r" ((USItype) (ah)), \
"rI" ((USItype) (bh)), \
"%r" ((USItype) (al)), \
"rI" ((USItype) (bl)))
#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
__asm__ ("sub %1,%4,%5\n\tsubc %0,%2,%3" \
: "=r" ((USItype) (sh)), \
"=&r" ((USItype) (sl)) \
: "r" ((USItype) (ah)), \
"rI" ((USItype) (bh)), \
"r" ((USItype) (al)), \
"rI" ((USItype) (bl)))
#define umul_ppmm(xh, xl, m0, m1) \
do { \
USItype __m0 = (m0), __m1 = (m1); \
__asm__ ("multiplu %0,%1,%2" \
: "=r" ((USItype) (xl)) \
: "r" (__m0), \
"r" (__m1)); \
__asm__ ("multmu %0,%1,%2" \
: "=r" ((USItype) (xh)) \
: "r" (__m0), \
"r" (__m1)); \
} while (0)
#define udiv_qrnnd(q, r, n1, n0, d) \
__asm__ ("dividu %0,%3,%4" \
: "=r" ((USItype) (q)), \
"=q" ((USItype) (r)) \
: "1" ((USItype) (n1)), \
"r" ((USItype) (n0)), \
"r" ((USItype) (d)))
#define count_leading_zeros(count, x) \
__asm__ ("clz %0,%1" \
: "=r" ((USItype) (count)) \
: "r" ((USItype) (x)))
#define COUNT_LEADING_ZEROS_0 32
#endif /* __a29k__ */
#if defined (__alpha) && W_TYPE_SIZE == 64
#define umul_ppmm(ph, pl, m0, m1) \
do { \
UDItype __m0 = (m0), __m1 = (m1); \
__asm__ ("umulh %r1,%2,%0" \
: "=r" ((UDItype) ph) \
: "%rJ" (__m0), \
"rI" (__m1)); \
(pl) = __m0 * __m1; \
} while (0)
#define UMUL_TIME 46
#ifndef LONGLONG_STANDALONE
#define udiv_qrnnd(q, r, n1, n0, d) \
do { UDItype __r; \
(q) = __udiv_qrnnd (&__r, (n1), (n0), (d)); \
(r) = __r; \
} while (0)
extern UDItype __udiv_qrnnd PARAMS ((UDItype *, UDItype, UDItype, UDItype));
#define UDIV_TIME 220
#endif /* LONGLONG_STANDALONE */
#ifdef __alpha_cix__
#define count_leading_zeros(COUNT,X) \
__asm__("ctlz %1,%0" : "=r"(COUNT) : "r"(X))
#define count_trailing_zeros(COUNT,X) \
__asm__("cttz %1,%0" : "=r"(COUNT) : "r"(X))
#define COUNT_LEADING_ZEROS_0 64
#else
extern const UQItype __clz_tab[];
#define count_leading_zeros(COUNT,X) \
do { \
UDItype __xr = (X), __t, __a; \
__asm__("cmpbge $31,%1,%0" : "=r"(__t) : "r"(__xr)); \
__a = __clz_tab[__t ^ 0xff] - 1; \
__asm__("extbl %1,%2,%0" : "=r"(__t) : "r"(__xr), "r"(__a)); \
(COUNT) = 64 - (__clz_tab[__t] + __a*8); \
} while (0)
#define count_trailing_zeros(COUNT,X) \
do { \
UDItype __xr = (X), __t, __a; \
__asm__("cmpbge $31,%1,%0" : "=r"(__t) : "r"(__xr)); \
__t = ~__t & -~__t; \
__a = ((__t & 0xCC) != 0) * 2; \
__a += ((__t & 0xF0) != 0) * 4; \
__a += ((__t & 0xAA) != 0); \
__asm__("extbl %1,%2,%0" : "=r"(__t) : "r"(__xr), "r"(__a)); \
__a <<= 3; \
__t &= -__t; \
__a += ((__t & 0xCC) != 0) * 2; \
__a += ((__t & 0xF0) != 0) * 4; \
__a += ((__t & 0xAA) != 0); \
(COUNT) = __a; \
} while (0)
#endif /* __alpha_cix__ */
#endif /* __alpha */
#if defined (__arc__) && W_TYPE_SIZE == 32
#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
__asm__ ("add.f %1, %4, %5\n\tadc %0, %2, %3" \
: "=r" ((USItype) (sh)), \
"=&r" ((USItype) (sl)) \
: "%r" ((USItype) (ah)), \
"rIJ" ((USItype) (bh)), \
"%r" ((USItype) (al)), \
"rIJ" ((USItype) (bl)))
#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
__asm__ ("sub.f %1, %4, %5\n\tsbc %0, %2, %3" \
: "=r" ((USItype) (sh)), \
"=&r" ((USItype) (sl)) \
: "r" ((USItype) (ah)), \
"rIJ" ((USItype) (bh)), \
"r" ((USItype) (al)), \
"rIJ" ((USItype) (bl)))
/* Call libgcc routine. */
#define umul_ppmm(w1, w0, u, v) \
do { \
DWunion __w; \
__w.ll = __umulsidi3 (u, v); \
w1 = __w.s.high; \
w0 = __w.s.low; \
} while (0)
#define __umulsidi3 __umulsidi3
UDItype __umulsidi3 (USItype, USItype);
#endif
#if defined (__arm__) && W_TYPE_SIZE == 32
#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
__asm__ ("adds %1, %4, %5\n\tadc %0, %2, %3" \
: "=r" ((USItype) (sh)), \
"=&r" ((USItype) (sl)) \
: "%r" ((USItype) (ah)), \
"rI" ((USItype) (bh)), \
"%r" ((USItype) (al)), \
"rI" ((USItype) (bl)))
#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
__asm__ ("subs %1, %4, %5\n\tsbc %0, %2, %3" \
: "=r" ((USItype) (sh)), \
"=&r" ((USItype) (sl)) \
: "r" ((USItype) (ah)), \
"rI" ((USItype) (bh)), \
"r" ((USItype) (al)), \
"rI" ((USItype) (bl)))
#define umul_ppmm(xh, xl, a, b) \
{register USItype __t0, __t1, __t2; \
__asm__ ("%@ Inlined umul_ppmm\n" \
" mov %2, %5, lsr #16\n" \
" mov %0, %6, lsr #16\n" \
" bic %3, %5, %2, lsl #16\n" \
" bic %4, %6, %0, lsl #16\n" \
" mul %1, %3, %4\n" \
" mul %4, %2, %4\n" \
" mul %3, %0, %3\n" \
" mul %0, %2, %0\n" \
" adds %3, %4, %3\n" \
" addcs %0, %0, #65536\n" \
" adds %1, %1, %3, lsl #16\n" \
" adc %0, %0, %3, lsr #16" \
: "=&r" ((USItype) (xh)), \
"=r" ((USItype) (xl)), \
"=&r" (__t0), "=&r" (__t1), "=r" (__t2) \
: "r" ((USItype) (a)), \
"r" ((USItype) (b)));}
#define UMUL_TIME 20
#define UDIV_TIME 100
#endif /* __arm__ */
#if defined (__clipper__) && W_TYPE_SIZE == 32
#define umul_ppmm(w1, w0, u, v) \
({union {UDItype __ll; \
struct {USItype __l, __h;} __i; \
} __xx; \
__asm__ ("mulwux %2,%0" \
: "=r" (__xx.__ll) \
: "%0" ((USItype) (u)), \
"r" ((USItype) (v))); \
(w1) = __xx.__i.__h; (w0) = __xx.__i.__l;})
#define smul_ppmm(w1, w0, u, v) \
({union {DItype __ll; \
struct {SItype __l, __h;} __i; \
} __xx; \
__asm__ ("mulwx %2,%0" \
: "=r" (__xx.__ll) \
: "%0" ((SItype) (u)), \
"r" ((SItype) (v))); \
(w1) = __xx.__i.__h; (w0) = __xx.__i.__l;})
#define __umulsidi3(u, v) \
({UDItype __w; \
__asm__ ("mulwux %2,%0" \
: "=r" (__w) \
: "%0" ((USItype) (u)), \
"r" ((USItype) (v))); \
__w; })
#endif /* __clipper__ */
#if defined (__gmicro__) && W_TYPE_SIZE == 32
#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
__asm__ ("add.w %5,%1\n\taddx %3,%0" \
: "=g" ((USItype) (sh)), \
"=&g" ((USItype) (sl)) \
: "%0" ((USItype) (ah)), \
"g" ((USItype) (bh)), \
"%1" ((USItype) (al)), \
"g" ((USItype) (bl)))
#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
__asm__ ("sub.w %5,%1\n\tsubx %3,%0" \
: "=g" ((USItype) (sh)), \
"=&g" ((USItype) (sl)) \
: "0" ((USItype) (ah)), \
"g" ((USItype) (bh)), \
"1" ((USItype) (al)), \
"g" ((USItype) (bl)))
#define umul_ppmm(ph, pl, m0, m1) \
__asm__ ("mulx %3,%0,%1" \
: "=g" ((USItype) (ph)), \
"=r" ((USItype) (pl)) \
: "%0" ((USItype) (m0)), \
"g" ((USItype) (m1)))
#define udiv_qrnnd(q, r, nh, nl, d) \
__asm__ ("divx %4,%0,%1" \
: "=g" ((USItype) (q)), \
"=r" ((USItype) (r)) \
: "1" ((USItype) (nh)), \
"0" ((USItype) (nl)), \
"g" ((USItype) (d)))
#define count_leading_zeros(count, x) \
__asm__ ("bsch/1 %1,%0" \
: "=g" (count) \
: "g" ((USItype) (x)), \
"0" ((USItype) 0))
#endif
#if defined (__hppa) && W_TYPE_SIZE == 32
#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
__asm__ ("add %4,%5,%1\n\taddc %2,%3,%0" \
: "=r" ((USItype) (sh)), \
"=&r" ((USItype) (sl)) \
: "%rM" ((USItype) (ah)), \
"rM" ((USItype) (bh)), \
"%rM" ((USItype) (al)), \
"rM" ((USItype) (bl)))
#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
__asm__ ("sub %4,%5,%1\n\tsubb %2,%3,%0" \
: "=r" ((USItype) (sh)), \
"=&r" ((USItype) (sl)) \
: "rM" ((USItype) (ah)), \
"rM" ((USItype) (bh)), \
"rM" ((USItype) (al)), \
"rM" ((USItype) (bl)))
#if defined (_PA_RISC1_1)
#define umul_ppmm(w1, w0, u, v) \
do { \
union \
{ \
UDItype __f; \
struct {USItype __w1, __w0;} __w1w0; \
} __t; \
__asm__ ("xmpyu %1,%2,%0" \
: "=x" (__t.__f) \
: "x" ((USItype) (u)), \
"x" ((USItype) (v))); \
(w1) = __t.__w1w0.__w1; \
(w0) = __t.__w1w0.__w0; \
} while (0)
#define UMUL_TIME 8
#else
#define UMUL_TIME 30
#endif
#define UDIV_TIME 40
#define count_leading_zeros(count, x) \
do { \
USItype __tmp; \
__asm__ ( \
"ldi 1,%0\n" \
" extru,= %1,15,16,%%r0 ; Bits 31..16 zero?\n" \
" extru,tr %1,15,16,%1 ; No. Shift down, skip add.\n"\
" ldo 16(%0),%0 ; Yes. Perform add.\n" \
" extru,= %1,23,8,%%r0 ; Bits 15..8 zero?\n" \
" extru,tr %1,23,8,%1 ; No. Shift down, skip add.\n"\
" ldo 8(%0),%0 ; Yes. Perform add.\n" \
" extru,= %1,27,4,%%r0 ; Bits 7..4 zero?\n" \
" extru,tr %1,27,4,%1 ; No. Shift down, skip add.\n"\
" ldo 4(%0),%0 ; Yes. Perform add.\n" \
" extru,= %1,29,2,%%r0 ; Bits 3..2 zero?\n" \
" extru,tr %1,29,2,%1 ; No. Shift down, skip add.\n"\
" ldo 2(%0),%0 ; Yes. Perform add.\n" \
" extru %1,30,1,%1 ; Extract bit 1.\n" \
" sub %0,%1,%0 ; Subtract it.\n" \
: "=r" (count), "=r" (__tmp) : "1" (x)); \
} while (0)
#endif
#if (defined (__i370__) || defined (__mvs__)) && W_TYPE_SIZE == 32
#define umul_ppmm(xh, xl, m0, m1) \
do { \
union {UDItype __ll; \
struct {USItype __h, __l;} __i; \
} __xx; \
USItype __m0 = (m0), __m1 = (m1); \
__asm__ ("mr %0,%3" \
: "=r" (__xx.__i.__h), \
"=r" (__xx.__i.__l) \
: "%1" (__m0), \
"r" (__m1)); \
(xh) = __xx.__i.__h; (xl) = __xx.__i.__l; \
(xh) += ((((SItype) __m0 >> 31) & __m1) \
+ (((SItype) __m1 >> 31) & __m0)); \
} while (0)
#define smul_ppmm(xh, xl, m0, m1) \
do { \
union {DItype __ll; \
struct {USItype __h, __l;} __i; \
} __xx; \
__asm__ ("mr %0,%3" \
: "=r" (__xx.__i.__h), \
"=r" (__xx.__i.__l) \
: "%1" (m0), \
"r" (m1)); \
(xh) = __xx.__i.__h; (xl) = __xx.__i.__l; \
} while (0)
#define sdiv_qrnnd(q, r, n1, n0, d) \
do { \
union {DItype __ll; \
struct {USItype __h, __l;} __i; \
} __xx; \
__xx.__i.__h = n1; __xx.__i.__l = n0; \
__asm__ ("dr %0,%2" \
: "=r" (__xx.__ll) \
: "0" (__xx.__ll), "r" (d)); \
(q) = __xx.__i.__l; (r) = __xx.__i.__h; \
} while (0)
#endif
#if (defined (__i386__) || defined (__i486__)) && W_TYPE_SIZE == 32
#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
__asm__ ("addl %5,%1\n\tadcl %3,%0" \
: "=r" ((USItype) (sh)), \
"=&r" ((USItype) (sl)) \
: "%0" ((USItype) (ah)), \
"g" ((USItype) (bh)), \
"%1" ((USItype) (al)), \
"g" ((USItype) (bl)))
#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
__asm__ ("subl %5,%1\n\tsbbl %3,%0" \
: "=r" ((USItype) (sh)), \
"=&r" ((USItype) (sl)) \
: "0" ((USItype) (ah)), \
"g" ((USItype) (bh)), \
"1" ((USItype) (al)), \
"g" ((USItype) (bl)))
#define umul_ppmm(w1, w0, u, v) \
__asm__ ("mull %3" \
: "=a" ((USItype) (w0)), \
"=d" ((USItype) (w1)) \
: "%0" ((USItype) (u)), \
"rm" ((USItype) (v)))
#define udiv_qrnnd(q, r, n1, n0, dv) \
__asm__ ("divl %4" \
: "=a" ((USItype) (q)), \
"=d" ((USItype) (r)) \
: "0" ((USItype) (n0)), \
"1" ((USItype) (n1)), \
"rm" ((USItype) (dv)))
#define count_leading_zeros(count, x) \
do { \
USItype __cbtmp; \
__asm__ ("bsrl %1,%0" \
: "=r" (__cbtmp) : "rm" ((USItype) (x))); \
(count) = __cbtmp ^ 31; \
} while (0)
#define count_trailing_zeros(count, x) \
__asm__ ("bsfl %1,%0" : "=r" (count) : "rm" ((USItype)(x)))
#define UMUL_TIME 40
#define UDIV_TIME 40
#endif /* 80x86 */
#if defined (__i860__) && W_TYPE_SIZE == 32
#if 0
/* Make sure these patterns really improve the code before
switching them on. */
#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
do { \
union \
{ \
DItype __ll; \
struct {USItype __l, __h;} __i; \
} __a, __b, __s; \
__a.__i.__l = (al); \
__a.__i.__h = (ah); \
__b.__i.__l = (bl); \
__b.__i.__h = (bh); \
__asm__ ("fiadd.dd %1,%2,%0" \
: "=f" (__s.__ll) \
: "%f" (__a.__ll), "f" (__b.__ll)); \
(sh) = __s.__i.__h; \
(sl) = __s.__i.__l; \
} while (0)
#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
do { \
union \
{ \
DItype __ll; \
struct {USItype __l, __h;} __i; \
} __a, __b, __s; \
__a.__i.__l = (al); \
__a.__i.__h = (ah); \
__b.__i.__l = (bl); \
__b.__i.__h = (bh); \
__asm__ ("fisub.dd %1,%2,%0" \
: "=f" (__s.__ll) \
: "%f" (__a.__ll), "f" (__b.__ll)); \
(sh) = __s.__i.__h; \
(sl) = __s.__i.__l; \
} while (0)
#endif
#endif /* __i860__ */
#if defined (__i960__) && W_TYPE_SIZE == 32
#define umul_ppmm(w1, w0, u, v) \
({union {UDItype __ll; \
struct {USItype __l, __h;} __i; \
} __xx; \
__asm__ ("emul %2,%1,%0" \
: "=d" (__xx.__ll) \
: "%dI" ((USItype) (u)), \
"dI" ((USItype) (v))); \
(w1) = __xx.__i.__h; (w0) = __xx.__i.__l;})
#define __umulsidi3(u, v) \
({UDItype __w; \
__asm__ ("emul %2,%1,%0" \
: "=d" (__w) \
: "%dI" ((USItype) (u)), \
"dI" ((USItype) (v))); \
__w; })
#endif /* __i960__ */
#if defined (__M32R__) && W_TYPE_SIZE == 32
#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
/* The cmp clears the condition bit. */ \
__asm__ ("cmp %0,%0\n\taddx %%5,%1\n\taddx %%3,%0" \
: "=r" ((USItype) (sh)), \
"=&r" ((USItype) (sl)) \
: "%0" ((USItype) (ah)), \
"r" ((USItype) (bh)), \
"%1" ((USItype) (al)), \
"r" ((USItype) (bl)) \
: "cbit")
#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
/* The cmp clears the condition bit. */ \
__asm__ ("cmp %0,%0\n\tsubx %5,%1\n\tsubx %3,%0" \
: "=r" ((USItype) (sh)), \
"=&r" ((USItype) (sl)) \
: "0" ((USItype) (ah)), \
"r" ((USItype) (bh)), \
"1" ((USItype) (al)), \
"r" ((USItype) (bl)) \
: "cbit")
#endif /* __M32R__ */
#if defined (__mc68000__) && W_TYPE_SIZE == 32
#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
__asm__ ("add%.l %5,%1\n\taddx%.l %3,%0" \
: "=d" ((USItype) (sh)), \
"=&d" ((USItype) (sl)) \
: "%0" ((USItype) (ah)), \
"d" ((USItype) (bh)), \
"%1" ((USItype) (al)), \
"g" ((USItype) (bl)))
#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
__asm__ ("sub%.l %5,%1\n\tsubx%.l %3,%0" \
: "=d" ((USItype) (sh)), \
"=&d" ((USItype) (sl)) \
: "0" ((USItype) (ah)), \
"d" ((USItype) (bh)), \
"1" ((USItype) (al)), \
"g" ((USItype) (bl)))
/* The '020, '030, '040 and CPU32 have 32x32->64 and 64/32->32q-32r. */
#if defined (__mc68020__) || defined(mc68020) \
|| defined(__mc68030__) || defined(mc68030) \
|| defined(__mc68040__) || defined(mc68040) \
|| defined(__mcpu32__) || defined(mcpu32) \
|| defined(__NeXT__)
#define umul_ppmm(w1, w0, u, v) \
__asm__ ("mulu%.l %3,%1:%0" \
: "=d" ((USItype) (w0)), \
"=d" ((USItype) (w1)) \
: "%0" ((USItype) (u)), \
"dmi" ((USItype) (v)))
#define UMUL_TIME 45
#define udiv_qrnnd(q, r, n1, n0, d) \
__asm__ ("divu%.l %4,%1:%0" \
: "=d" ((USItype) (q)), \
"=d" ((USItype) (r)) \
: "0" ((USItype) (n0)), \
"1" ((USItype) (n1)), \
"dmi" ((USItype) (d)))
#define UDIV_TIME 90
#define sdiv_qrnnd(q, r, n1, n0, d) \
__asm__ ("divs%.l %4,%1:%0" \
: "=d" ((USItype) (q)), \
"=d" ((USItype) (r)) \
: "0" ((USItype) (n0)), \
"1" ((USItype) (n1)), \
"dmi" ((USItype) (d)))
#else /* not mc68020 */
#if !defined(__mcf5200__)
/* %/ inserts REGISTER_PREFIX, %# inserts IMMEDIATE_PREFIX. */
#define umul_ppmm(xh, xl, a, b) \
__asm__ ("| Inlined umul_ppmm\n" \
" move%.l %2,%/d0\n" \
" move%.l %3,%/d1\n" \
" move%.l %/d0,%/d2\n" \
" swap %/d0\n" \
" move%.l %/d1,%/d3\n" \
" swap %/d1\n" \
" move%.w %/d2,%/d4\n" \
" mulu %/d3,%/d4\n" \
" mulu %/d1,%/d2\n" \
" mulu %/d0,%/d3\n" \
" mulu %/d0,%/d1\n" \
" move%.l %/d4,%/d0\n" \
" eor%.w %/d0,%/d0\n" \
" swap %/d0\n" \
" add%.l %/d0,%/d2\n" \
" add%.l %/d3,%/d2\n" \
" jcc 1f\n" \
" add%.l %#65536,%/d1\n" \
"1: swap %/d2\n" \
" moveq %#0,%/d0\n" \
" move%.w %/d2,%/d0\n" \
" move%.w %/d4,%/d2\n" \
" move%.l %/d2,%1\n" \
" add%.l %/d1,%/d0\n" \
" move%.l %/d0,%0" \
: "=g" ((USItype) (xh)), \
"=g" ((USItype) (xl)) \
: "g" ((USItype) (a)), \
"g" ((USItype) (b)) \
: "d0", "d1", "d2", "d3", "d4")
#define UMUL_TIME 100
#define UDIV_TIME 400
#endif /* not mcf5200 */
#endif /* not mc68020 */
/* The '020, '030, '040 and '060 have bitfield insns. */
#if defined (__mc68020__) || defined(mc68020) \
|| defined(__mc68030__) || defined(mc68030) \
|| defined(__mc68040__) || defined(mc68040) \
|| defined(__mc68060__) || defined(mc68060) \
|| defined(__NeXT__)
#define count_leading_zeros(count, x) \
__asm__ ("bfffo %1{%b2:%b2},%0" \
: "=d" ((USItype) (count)) \
: "od" ((USItype) (x)), "n" (0))
#endif
#endif /* mc68000 */
#if defined (__m88000__) && W_TYPE_SIZE == 32
#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
__asm__ ("addu.co %1,%r4,%r5\n\taddu.ci %0,%r2,%r3" \
: "=r" ((USItype) (sh)), \
"=&r" ((USItype) (sl)) \
: "%rJ" ((USItype) (ah)), \
"rJ" ((USItype) (bh)), \
"%rJ" ((USItype) (al)), \
"rJ" ((USItype) (bl)))
#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
__asm__ ("subu.co %1,%r4,%r5\n\tsubu.ci %0,%r2,%r3" \
: "=r" ((USItype) (sh)), \
"=&r" ((USItype) (sl)) \
: "rJ" ((USItype) (ah)), \
"rJ" ((USItype) (bh)), \
"rJ" ((USItype) (al)), \
"rJ" ((USItype) (bl)))
#define count_leading_zeros(count, x) \
do { \
USItype __cbtmp; \
__asm__ ("ff1 %0,%1" \
: "=r" (__cbtmp) \
: "r" ((USItype) (x))); \
(count) = __cbtmp ^ 31; \
} while (0)
#define COUNT_LEADING_ZEROS_0 63 /* sic */
#if defined (__mc88110__)
#define umul_ppmm(wh, wl, u, v) \
do { \
union {UDItype __ll; \
struct {USItype __h, __l;} __i; \
} __xx; \
__asm__ ("mulu.d %0,%1,%2" \
: "=r" (__xx.__ll) \
: "r" ((USItype) (u)), \
"r" ((USItype) (v))); \
(wh) = __xx.__i.__h; \
(wl) = __xx.__i.__l; \
} while (0)
#define udiv_qrnnd(q, r, n1, n0, d) \
({union {UDItype __ll; \
struct {USItype __h, __l;} __i; \
} __xx; \
USItype __q; \
__xx.__i.__h = (n1); __xx.__i.__l = (n0); \
__asm__ ("divu.d %0,%1,%2" \
: "=r" (__q) \
: "r" (__xx.__ll), \
"r" ((USItype) (d))); \
(r) = (n0) - __q * (d); (q) = __q; })
#define UMUL_TIME 5
#define UDIV_TIME 25
#else
#define UMUL_TIME 17
#define UDIV_TIME 150
#endif /* __mc88110__ */
#endif /* __m88000__ */
#if defined (__mips__) && W_TYPE_SIZE == 32
#define umul_ppmm(w1, w0, u, v) \
__asm__ ("multu %2,%3" \
: "=l" ((USItype) (w0)), \
"=h" ((USItype) (w1)) \
: "d" ((USItype) (u)), \
"d" ((USItype) (v)))
#define UMUL_TIME 10
#define UDIV_TIME 100
#endif /* __mips__ */
#if defined (__ns32000__) && W_TYPE_SIZE == 32
#define umul_ppmm(w1, w0, u, v) \
({union {UDItype __ll; \
struct {USItype __l, __h;} __i; \
} __xx; \
__asm__ ("meid %2,%0" \
: "=g" (__xx.__ll) \
: "%0" ((USItype) (u)), \
"g" ((USItype) (v))); \
(w1) = __xx.__i.__h; (w0) = __xx.__i.__l;})
#define __umulsidi3(u, v) \
({UDItype __w; \
__asm__ ("meid %2,%0" \
: "=g" (__w) \
: "%0" ((USItype) (u)), \
"g" ((USItype) (v))); \
__w; })
#define udiv_qrnnd(q, r, n1, n0, d) \
({union {UDItype __ll; \
struct {USItype __l, __h;} __i; \
} __xx; \
__xx.__i.__h = (n1); __xx.__i.__l = (n0); \
__asm__ ("deid %2,%0" \
: "=g" (__xx.__ll) \
: "0" (__xx.__ll), \
"g" ((USItype) (d))); \
(r) = __xx.__i.__l; (q) = __xx.__i.__h; })
#define count_trailing_zeros(count,x) \
do {
__asm__ ("ffsd %2,%0" \
: "=r" ((USItype) (count)) \
: "0" ((USItype) 0), \
"r" ((USItype) (x))); \
} while (0)
#endif /* __ns32000__ */
#if (defined (_ARCH_PPC) || defined (_IBMR2))
#if W_TYPE_SIZE == 32
#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
do { \
if (__builtin_constant_p (bh) && (bh) == 0) \
__asm__ ("{a%I4|add%I4c} %1,%3,%4\n\t{aze|addze} %0,%2" \
: "=r" ((USItype) (sh)), \
"=&r" ((USItype) (sl)) \
: "%r" ((USItype) (ah)), \
"%r" ((USItype) (al)), \
"rI" ((USItype) (bl))); \
else if (__builtin_constant_p (bh) && (bh) ==~(USItype) 0) \
__asm__ ("{a%I4|add%I4c} %1,%3,%4\n\t{ame|addme} %0,%2" \
: "=r" ((USItype) (sh)), \
"=&r" ((USItype) (sl)) \
: "%r" ((USItype) (ah)), \
"%r" ((USItype) (al)), \
"rI" ((USItype) (bl))); \
else \
__asm__ ("{a%I5|add%I5c} %1,%4,%5\n\t{ae|adde} %0,%2,%3" \
: "=r" ((USItype) (sh)), \
"=&r" ((USItype) (sl)) \
: "%r" ((USItype) (ah)), \
"r" ((USItype) (bh)), \
"%r" ((USItype) (al)), \
"rI" ((USItype) (bl))); \
} while (0)
#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
do { \
if (__builtin_constant_p (ah) && (ah) == 0) \
__asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{sfze|subfze} %0,%2" \
: "=r" ((USItype) (sh)), \
"=&r" ((USItype) (sl)) \
: "r" ((USItype) (bh)), \
"rI" ((USItype) (al)), \
"r" ((USItype) (bl))); \
else if (__builtin_constant_p (ah) && (ah) ==~(USItype) 0) \
__asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{sfme|subfme} %0,%2" \
: "=r" ((USItype) (sh)), \
"=&r" ((USItype) (sl)) \
: "r" ((USItype) (bh)), \
"rI" ((USItype) (al)), \
"r" ((USItype) (bl))); \
else if (__builtin_constant_p (bh) && (bh) == 0) \
__asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{ame|addme} %0,%2" \
: "=r" ((USItype) (sh)), \
"=&r" ((USItype) (sl)) \
: "r" ((USItype) (ah)), \
"rI" ((USItype) (al)), \
"r" ((USItype) (bl))); \
else if (__builtin_constant_p (bh) && (bh) ==~(USItype) 0) \
__asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{aze|addze} %0,%2" \
: "=r" ((USItype) (sh)), \
"=&r" ((USItype) (sl)) \
: "r" ((USItype) (ah)), \
"rI" ((USItype) (al)), \
"r" ((USItype) (bl))); \
else \
__asm__ ("{sf%I4|subf%I4c} %1,%5,%4\n\t{sfe|subfe} %0,%3,%2" \
: "=r" ((USItype) (sh)), \
"=&r" ((USItype) (sl)) \
: "r" ((USItype) (ah)), \
"r" ((USItype) (bh)), \
"rI" ((USItype) (al)), \
"r" ((USItype) (bl))); \
} while (0)
#endif /* W_TYPE_SIZE */
#define count_leading_zeros(count, x) \
__asm__ ("{cntlz|cntlzw} %0,%1" \
: "=r" ((USItype) (count)) \
: "r" ((USItype) (x)))
#define COUNT_LEADING_ZEROS_0 32
#if defined (_ARCH_PPC)
#define umul_ppmm(ph, pl, m0, m1) \
do { \
USItype __m0 = (m0), __m1 = (m1); \
__asm__ ("mulhwu %0,%1,%2" \
: "=r" ((USItype) ph) \
: "%r" (__m0), \
"r" (__m1)); \
(pl) = __m0 * __m1; \
} while (0)
#define UMUL_TIME 15
#define smul_ppmm(ph, pl, m0, m1) \
do { \
SItype __m0 = (m0), __m1 = (m1); \
__asm__ ("mulhw %0,%1,%2" \
: "=r" ((SItype) ph) \
: "%r" (__m0), \
"r" (__m1)); \
(pl) = __m0 * __m1; \
} while (0)
#define SMUL_TIME 14
#define UDIV_TIME 120
#elif defined (_ARCH_PWR)
#define umul_ppmm(xh, xl, m0, m1) \
do { \
USItype __m0 = (m0), __m1 = (m1); \
__asm__ ("mul %0,%2,%3" \
: "=r" ((USItype) (xh)), \
"=q" ((USItype) (xl)) \
: "r" (__m0), \
"r" (__m1)); \
(xh) += ((((SItype) __m0 >> 31) & __m1) \
+ (((SItype) __m1 >> 31) & __m0)); \
} while (0)
#define UMUL_TIME 8
#define smul_ppmm(xh, xl, m0, m1) \
__asm__ ("mul %0,%2,%3" \
: "=r" ((SItype) (xh)), \
"=q" ((SItype) (xl)) \
: "r" (m0), \
"r" (m1))
#define SMUL_TIME 4
#define sdiv_qrnnd(q, r, nh, nl, d) \
__asm__ ("div %0,%2,%4" \
: "=r" ((SItype) (q)), "=q" ((SItype) (r)) \
: "r" ((SItype) (nh)), "1" ((SItype) (nl)), "r" ((SItype) (d)))
#define UDIV_TIME 100
#endif
#endif /* Power architecture variants. */
#if defined (__pyr__) && W_TYPE_SIZE == 32
#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
__asm__ ("addw %5,%1\n\taddwc %3,%0" \
: "=r" ((USItype) (sh)), \
"=&r" ((USItype) (sl)) \
: "%0" ((USItype) (ah)), \
"g" ((USItype) (bh)), \
"%1" ((USItype) (al)), \
"g" ((USItype) (bl)))
#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
__asm__ ("subw %5,%1\n\tsubwb %3,%0" \
: "=r" ((USItype) (sh)), \
"=&r" ((USItype) (sl)) \
: "0" ((USItype) (ah)), \
"g" ((USItype) (bh)), \
"1" ((USItype) (al)), \
"g" ((USItype) (bl)))
/* This insn works on Pyramids with AP, XP, or MI CPUs, but not with SP. */
#define umul_ppmm(w1, w0, u, v) \
({union {UDItype __ll; \
struct {USItype __h, __l;} __i; \
} __xx; \
__asm__ ("movw %1,%R0\n\tuemul %2,%0" \
: "=&r" (__xx.__ll) \
: "g" ((USItype) (u)), \
"g" ((USItype) (v))); \
(w1) = __xx.__i.__h; (w0) = __xx.__i.__l;})
#endif /* __pyr__ */
#if defined (__ibm032__) /* RT/ROMP */ && W_TYPE_SIZE == 32
#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
__asm__ ("a %1,%5\n\tae %0,%3" \
: "=r" ((USItype) (sh)), \
"=&r" ((USItype) (sl)) \
: "%0" ((USItype) (ah)), \
"r" ((USItype) (bh)), \
"%1" ((USItype) (al)), \
"r" ((USItype) (bl)))
#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
__asm__ ("s %1,%5\n\tse %0,%3" \
: "=r" ((USItype) (sh)), \
"=&r" ((USItype) (sl)) \
: "0" ((USItype) (ah)), \
"r" ((USItype) (bh)), \
"1" ((USItype) (al)), \
"r" ((USItype) (bl)))
#define umul_ppmm(ph, pl, m0, m1) \
do { \
USItype __m0 = (m0), __m1 = (m1); \
__asm__ ( \
"s r2,r2\n" \
" mts r10,%2\n" \
" m r2,%3\n" \
" m r2,%3\n" \
" m r2,%3\n" \
" m r2,%3\n" \
" m r2,%3\n" \
" m r2,%3\n" \
" m r2,%3\n" \
" m r2,%3\n" \
" m r2,%3\n" \
" m r2,%3\n" \
" m r2,%3\n" \
" m r2,%3\n" \
" m r2,%3\n" \
" m r2,%3\n" \
" m r2,%3\n" \
" m r2,%3\n" \
" cas %0,r2,r0\n" \
" mfs r10,%1" \
: "=r" ((USItype) (ph)), \
"=r" ((USItype) (pl)) \
: "%r" (__m0), \
"r" (__m1) \
: "r2"); \
(ph) += ((((SItype) __m0 >> 31) & __m1) \
+ (((SItype) __m1 >> 31) & __m0)); \
} while (0)
#define UMUL_TIME 20
#define UDIV_TIME 200
#define count_leading_zeros(count, x) \
do { \
if ((x) >= 0x10000) \
__asm__ ("clz %0,%1" \
: "=r" ((USItype) (count)) \
: "r" ((USItype) (x) >> 16)); \
else \
{ \
__asm__ ("clz %0,%1" \
: "=r" ((USItype) (count)) \
: "r" ((USItype) (x))); \
(count) += 16; \
} \
} while (0)
#endif
#if defined (__sh2__) && W_TYPE_SIZE == 32
#define umul_ppmm(w1, w0, u, v) \
__asm__ ( \
"dmulu.l %2,%3\n\tsts macl,%1\n\tsts mach,%0" \
: "=r" ((USItype)(w1)), \
"=r" ((USItype)(w0)) \
: "r" ((USItype)(u)), \
"r" ((USItype)(v)) \
: "macl", "mach")
#define UMUL_TIME 5
#endif
#if defined (__SH5__) && __SHMEDIA__ && W_TYPE_SIZE == 32
#define __umulsidi3(u,v) ((UDItype)(USItype)u*(USItype)v)
#define count_leading_zeros(count, x) \
do \
{ \
UDItype x_ = (USItype)(x); \
SItype c_; \
\
__asm__ ("nsb %1, %0" : "=r" (c_) : "r" (x_)); \
(count) = c_ - 31; \
} \
while (0)
#define COUNT_LEADING_ZEROS_0 32
#endif
#if defined (__sparc__) && !defined (__arch64__) && !defined (__sparcv9) \
&& W_TYPE_SIZE == 32
#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
__asm__ ("addcc %r4,%5,%1\n\taddx %r2,%3,%0" \
: "=r" ((USItype) (sh)), \
"=&r" ((USItype) (sl)) \
: "%rJ" ((USItype) (ah)), \
"rI" ((USItype) (bh)), \
"%rJ" ((USItype) (al)), \
"rI" ((USItype) (bl)) \
__CLOBBER_CC)
#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
__asm__ ("subcc %r4,%5,%1\n\tsubx %r2,%3,%0" \
: "=r" ((USItype) (sh)), \
"=&r" ((USItype) (sl)) \
: "rJ" ((USItype) (ah)), \
"rI" ((USItype) (bh)), \
"rJ" ((USItype) (al)), \
"rI" ((USItype) (bl)) \
__CLOBBER_CC)
#if defined (__sparc_v8__)
#define umul_ppmm(w1, w0, u, v) \
__asm__ ("umul %2,%3,%1;rd %%y,%0" \
: "=r" ((USItype) (w1)), \
"=r" ((USItype) (w0)) \
: "r" ((USItype) (u)), \
"r" ((USItype) (v)))
#define udiv_qrnnd(__q, __r, __n1, __n0, __d) \
__asm__ ("mov %2,%%y;nop;nop;nop;udiv %3,%4,%0;umul %0,%4,%1;sub %3,%1,%1"\
: "=&r" ((USItype) (__q)), \
"=&r" ((USItype) (__r)) \
: "r" ((USItype) (__n1)), \
"r" ((USItype) (__n0)), \
"r" ((USItype) (__d)))
#else
#if defined (__sparclite__)
/* This has hardware multiply but not divide. It also has two additional
instructions scan (ffs from high bit) and divscc. */
#define umul_ppmm(w1, w0, u, v) \
__asm__ ("umul %2,%3,%1;rd %%y,%0" \
: "=r" ((USItype) (w1)), \
"=r" ((USItype) (w0)) \
: "r" ((USItype) (u)), \
"r" ((USItype) (v)))
#define udiv_qrnnd(q, r, n1, n0, d) \
__asm__ ("! Inlined udiv_qrnnd\n" \
" wr %%g0,%2,%%y ! Not a delayed write for sparclite\n" \
" tst %%g0\n" \
" divscc %3,%4,%%g1\n" \
" divscc %%g1,%4,%%g1\n" \
" divscc %%g1,%4,%%g1\n" \
" divscc %%g1,%4,%%g1\n" \
" divscc %%g1,%4,%%g1\n" \
" divscc %%g1,%4,%%g1\n" \
" divscc %%g1,%4,%%g1\n" \
" divscc %%g1,%4,%%g1\n" \
" divscc %%g1,%4,%%g1\n" \
" divscc %%g1,%4,%%g1\n" \
" divscc %%g1,%4,%%g1\n" \
" divscc %%g1,%4,%%g1\n" \
" divscc %%g1,%4,%%g1\n" \
" divscc %%g1,%4,%%g1\n" \
" divscc %%g1,%4,%%g1\n" \
" divscc %%g1,%4,%%g1\n" \
" divscc %%g1,%4,%%g1\n" \
" divscc %%g1,%4,%%g1\n" \
" divscc %%g1,%4,%%g1\n" \
" divscc %%g1,%4,%%g1\n" \
" divscc %%g1,%4,%%g1\n" \
" divscc %%g1,%4,%%g1\n" \
" divscc %%g1,%4,%%g1\n" \
" divscc %%g1,%4,%%g1\n" \
" divscc %%g1,%4,%%g1\n" \
" divscc %%g1,%4,%%g1\n" \
" divscc %%g1,%4,%%g1\n" \
" divscc %%g1,%4,%%g1\n" \
" divscc %%g1,%4,%%g1\n" \
" divscc %%g1,%4,%%g1\n" \
" divscc %%g1,%4,%%g1\n" \
" divscc %%g1,%4,%0\n" \
" rd %%y,%1\n" \
" bl,a 1f\n" \
" add %1,%4,%1\n" \
"1: ! End of inline udiv_qrnnd" \
: "=r" ((USItype) (q)), \
"=r" ((USItype) (r)) \
: "r" ((USItype) (n1)), \
"r" ((USItype) (n0)), \
"rI" ((USItype) (d)) \
: "g1" __AND_CLOBBER_CC)
#define UDIV_TIME 37
#define count_leading_zeros(count, x) \
do { \
__asm__ ("scan %1,1,%0" \
: "=r" ((USItype) (count)) \
: "r" ((USItype) (x))); \
} while (0)
/* Early sparclites return 63 for an argument of 0, but they warn that future
implementations might change this. Therefore, leave COUNT_LEADING_ZEROS_0
undefined. */
#else
/* SPARC without integer multiplication and divide instructions.
(i.e. at least Sun4/20,40,60,65,75,110,260,280,330,360,380,470,490) */
#define umul_ppmm(w1, w0, u, v) \
__asm__ ("! Inlined umul_ppmm\n" \
" wr %%g0,%2,%%y ! SPARC has 0-3 delay insn after a wr\n"\
" sra %3,31,%%o5 ! Don't move this insn\n" \
" and %2,%%o5,%%o5 ! Don't move this insn\n" \
" andcc %%g0,0,%%g1 ! Don't move this insn\n" \
" mulscc %%g1,%3,%%g1\n" \
" mulscc %%g1,%3,%%g1\n" \
" mulscc %%g1,%3,%%g1\n" \
" mulscc %%g1,%3,%%g1\n" \
" mulscc %%g1,%3,%%g1\n" \
" mulscc %%g1,%3,%%g1\n" \
" mulscc %%g1,%3,%%g1\n" \
" mulscc %%g1,%3,%%g1\n" \
" mulscc %%g1,%3,%%g1\n" \
" mulscc %%g1,%3,%%g1\n" \
" mulscc %%g1,%3,%%g1\n" \
" mulscc %%g1,%3,%%g1\n" \
" mulscc %%g1,%3,%%g1\n" \
" mulscc %%g1,%3,%%g1\n" \
" mulscc %%g1,%3,%%g1\n" \
" mulscc %%g1,%3,%%g1\n" \
" mulscc %%g1,%3,%%g1\n" \
" mulscc %%g1,%3,%%g1\n" \
" mulscc %%g1,%3,%%g1\n" \
" mulscc %%g1,%3,%%g1\n" \
" mulscc %%g1,%3,%%g1\n" \
" mulscc %%g1,%3,%%g1\n" \
" mulscc %%g1,%3,%%g1\n" \
" mulscc %%g1,%3,%%g1\n" \
" mulscc %%g1,%3,%%g1\n" \
" mulscc %%g1,%3,%%g1\n" \
" mulscc %%g1,%3,%%g1\n" \
" mulscc %%g1,%3,%%g1\n" \
" mulscc %%g1,%3,%%g1\n" \
" mulscc %%g1,%3,%%g1\n" \
" mulscc %%g1,%3,%%g1\n" \
" mulscc %%g1,%3,%%g1\n" \
" mulscc %%g1,0,%%g1\n" \
" add %%g1,%%o5,%0\n" \
" rd %%y,%1" \
: "=r" ((USItype) (w1)), \
"=r" ((USItype) (w0)) \
: "%rI" ((USItype) (u)), \
"r" ((USItype) (v)) \
: "g1", "o5" __AND_CLOBBER_CC)
#define UMUL_TIME 39 /* 39 instructions */
/* It's quite necessary to add this much assembler for the sparc.
The default udiv_qrnnd (in C) is more than 10 times slower! */
#define udiv_qrnnd(__q, __r, __n1, __n0, __d) \
__asm__ ("! Inlined udiv_qrnnd\n" \
" mov 32,%%g1\n" \
" subcc %1,%2,%%g0\n" \
"1: bcs 5f\n" \
" addxcc %0,%0,%0 ! shift n1n0 and a q-bit in lsb\n" \
" sub %1,%2,%1 ! this kills msb of n\n" \
" addx %1,%1,%1 ! so this can't give carry\n" \
" subcc %%g1,1,%%g1\n" \
"2: bne 1b\n" \
" subcc %1,%2,%%g0\n" \
" bcs 3f\n" \
" addxcc %0,%0,%0 ! shift n1n0 and a q-bit in lsb\n" \
" b 3f\n" \
" sub %1,%2,%1 ! this kills msb of n\n" \
"4: sub %1,%2,%1\n" \
"5: addxcc %1,%1,%1\n" \
" bcc 2b\n" \
" subcc %%g1,1,%%g1\n" \
"! Got carry from n. Subtract next step to cancel this carry.\n" \
" bne 4b\n" \
" addcc %0,%0,%0 ! shift n1n0 and a 0-bit in lsb\n" \
" sub %1,%2,%1\n" \
"3: xnor %0,0,%0\n" \
" ! End of inline udiv_qrnnd" \
: "=&r" ((USItype) (__q)), \
"=&r" ((USItype) (__r)) \
: "r" ((USItype) (__d)), \
"1" ((USItype) (__n1)), \
"0" ((USItype) (__n0)) : "g1" __AND_CLOBBER_CC)
#define UDIV_TIME (3+7*32) /* 7 instructions/iteration. 32 iterations. */
#endif /* __sparclite__ */
#endif /* __sparc_v8__ */
#endif /* sparc32 */
#if ((defined (__sparc__) && defined (__arch64__)) || defined (__sparcv9)) \
&& W_TYPE_SIZE == 64
#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
__asm__ ("addcc %r4,%5,%1\n\t" \
"add %r2,%3,%0\n\t" \
"bcs,a,pn %%xcc, 1f\n\t" \
"add %0, 1, %0\n" \
"1:" \
: "=r" ((UDItype)(sh)), \
"=&r" ((UDItype)(sl)) \
: "%rJ" ((UDItype)(ah)), \
"rI" ((UDItype)(bh)), \
"%rJ" ((UDItype)(al)), \
"rI" ((UDItype)(bl)) \
__CLOBBER_CC)
#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
__asm__ ("subcc %r4,%5,%1\n\t" \
"sub %r2,%3,%0\n\t" \
"bcs,a,pn %%xcc, 1f\n\t" \
"sub %0, 1, %0\n\t" \
"1:" \
: "=r" ((UDItype)(sh)), \
"=&r" ((UDItype)(sl)) \
: "rJ" ((UDItype)(ah)), \
"rI" ((UDItype)(bh)), \
"rJ" ((UDItype)(al)), \
"rI" ((UDItype)(bl)) \
__CLOBBER_CC)
#define umul_ppmm(wh, wl, u, v) \
do { \
UDItype tmp1, tmp2, tmp3, tmp4; \
__asm__ __volatile__ ( \
"srl %7,0,%3\n\t" \
"mulx %3,%6,%1\n\t" \
"srlx %6,32,%2\n\t" \
"mulx %2,%3,%4\n\t" \
"sllx %4,32,%5\n\t" \
"srl %6,0,%3\n\t" \
"sub %1,%5,%5\n\t" \
"srlx %5,32,%5\n\t" \
"addcc %4,%5,%4\n\t" \
"srlx %7,32,%5\n\t" \
"mulx %3,%5,%3\n\t" \
"mulx %2,%5,%5\n\t" \
"sethi %%hi(0x80000000),%2\n\t" \
"addcc %4,%3,%4\n\t" \
"srlx %4,32,%4\n\t" \
"add %2,%2,%2\n\t" \
"movcc %%xcc,%%g0,%2\n\t" \
"addcc %5,%4,%5\n\t" \
"sllx %3,32,%3\n\t" \
"add %1,%3,%1\n\t" \
"add %5,%2,%0" \
: "=r" ((UDItype)(wh)), \
"=&r" ((UDItype)(wl)), \
"=&r" (tmp1), "=&r" (tmp2), "=&r" (tmp3), "=&r" (tmp4) \
: "r" ((UDItype)(u)), \
"r" ((UDItype)(v)) \
__CLOBBER_CC); \
} while (0)
#define UMUL_TIME 96
#define UDIV_TIME 230
#endif /* sparc64 */
#if defined (__vax__) && W_TYPE_SIZE == 32
#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
__asm__ ("addl2 %5,%1\n\tadwc %3,%0" \
: "=g" ((USItype) (sh)), \
"=&g" ((USItype) (sl)) \
: "%0" ((USItype) (ah)), \
"g" ((USItype) (bh)), \
"%1" ((USItype) (al)), \
"g" ((USItype) (bl)))
#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
__asm__ ("subl2 %5,%1\n\tsbwc %3,%0" \
: "=g" ((USItype) (sh)), \
"=&g" ((USItype) (sl)) \
: "0" ((USItype) (ah)), \
"g" ((USItype) (bh)), \
"1" ((USItype) (al)), \
"g" ((USItype) (bl)))
#define umul_ppmm(xh, xl, m0, m1) \
do { \
union { \
UDItype __ll; \
struct {USItype __l, __h;} __i; \
} __xx; \
USItype __m0 = (m0), __m1 = (m1); \
__asm__ ("emul %1,%2,$0,%0" \
: "=r" (__xx.__ll) \
: "g" (__m0), \
"g" (__m1)); \
(xh) = __xx.__i.__h; \
(xl) = __xx.__i.__l; \
(xh) += ((((SItype) __m0 >> 31) & __m1) \
+ (((SItype) __m1 >> 31) & __m0)); \
} while (0)
#define sdiv_qrnnd(q, r, n1, n0, d) \
do { \
union {DItype __ll; \
struct {SItype __l, __h;} __i; \
} __xx; \
__xx.__i.__h = n1; __xx.__i.__l = n0; \
__asm__ ("ediv %3,%2,%0,%1" \
: "=g" (q), "=g" (r) \
: "g" (__xx.__ll), "g" (d)); \
} while (0)
#endif /* __vax__ */
#if defined (__z8000__) && W_TYPE_SIZE == 16
#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
__asm__ ("add %H1,%H5\n\tadc %H0,%H3" \
: "=r" ((unsigned int)(sh)), \
"=&r" ((unsigned int)(sl)) \
: "%0" ((unsigned int)(ah)), \
"r" ((unsigned int)(bh)), \
"%1" ((unsigned int)(al)), \
"rQR" ((unsigned int)(bl)))
#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
__asm__ ("sub %H1,%H5\n\tsbc %H0,%H3" \
: "=r" ((unsigned int)(sh)), \
"=&r" ((unsigned int)(sl)) \
: "0" ((unsigned int)(ah)), \
"r" ((unsigned int)(bh)), \
"1" ((unsigned int)(al)), \
"rQR" ((unsigned int)(bl)))
#define umul_ppmm(xh, xl, m0, m1) \
do { \
union {long int __ll; \
struct {unsigned int __h, __l;} __i; \
} __xx; \
unsigned int __m0 = (m0), __m1 = (m1); \
__asm__ ("mult %S0,%H3" \
: "=r" (__xx.__i.__h), \
"=r" (__xx.__i.__l) \
: "%1" (__m0), \
"rQR" (__m1)); \
(xh) = __xx.__i.__h; (xl) = __xx.__i.__l; \
(xh) += ((((signed int) __m0 >> 15) & __m1) \
+ (((signed int) __m1 >> 15) & __m0)); \
} while (0)
#endif /* __z8000__ */
#endif /* __GNUC__ */
/* If this machine has no inline assembler, use C macros. */
#if !defined (add_ssaaaa)
#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
do { \
UWtype __x; \
__x = (al) + (bl); \
(sh) = (ah) + (bh) + (__x < (al)); \
(sl) = __x; \
} while (0)
#endif
#if !defined (sub_ddmmss)
#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
do { \
UWtype __x; \
__x = (al) - (bl); \
(sh) = (ah) - (bh) - (__x > (al)); \
(sl) = __x; \
} while (0)
#endif
#if !defined (umul_ppmm)
#define umul_ppmm(w1, w0, u, v) \
do { \
UWtype __x0, __x1, __x2, __x3; \
UHWtype __ul, __vl, __uh, __vh; \
\
__ul = __ll_lowpart (u); \
__uh = __ll_highpart (u); \
__vl = __ll_lowpart (v); \
__vh = __ll_highpart (v); \
\
__x0 = (UWtype) __ul * __vl; \
__x1 = (UWtype) __ul * __vh; \
__x2 = (UWtype) __uh * __vl; \
__x3 = (UWtype) __uh * __vh; \
\
__x1 += __ll_highpart (__x0);/* this can't give carry */ \
__x1 += __x2; /* but this indeed can */ \
if (__x1 < __x2) /* did we get it? */ \
__x3 += __ll_B; /* yes, add it in the proper pos. */ \
\
(w1) = __x3 + __ll_highpart (__x1); \
(w0) = __ll_lowpart (__x1) * __ll_B + __ll_lowpart (__x0); \
} while (0)
#endif
#if !defined (__umulsidi3)
#define __umulsidi3(u, v) \
({DWunion __w; \
umul_ppmm (__w.s.high, __w.s.low, u, v); \
__w.ll; })
#endif
/* Define this unconditionally, so it can be used for debugging. */
#define __udiv_qrnnd_c(q, r, n1, n0, d) \
do { \
UWtype __d1, __d0, __q1, __q0; \
UWtype __r1, __r0, __m; \
__d1 = __ll_highpart (d); \
__d0 = __ll_lowpart (d); \
\
__r1 = (n1) % __d1; \
__q1 = (n1) / __d1; \
__m = (UWtype) __q1 * __d0; \
__r1 = __r1 * __ll_B | __ll_highpart (n0); \
if (__r1 < __m) \
{ \
__q1--, __r1 += (d); \
if (__r1 >= (d)) /* i.e. we didn't get carry when adding to __r1 */\
if (__r1 < __m) \
__q1--, __r1 += (d); \
} \
__r1 -= __m; \
\
__r0 = __r1 % __d1; \
__q0 = __r1 / __d1; \
__m = (UWtype) __q0 * __d0; \
__r0 = __r0 * __ll_B | __ll_lowpart (n0); \
if (__r0 < __m) \
{ \
__q0--, __r0 += (d); \
if (__r0 >= (d)) \
if (__r0 < __m) \
__q0--, __r0 += (d); \
} \
__r0 -= __m; \
\
(q) = (UWtype) __q1 * __ll_B | __q0; \
(r) = __r0; \
} while (0)
/* If the processor has no udiv_qrnnd but sdiv_qrnnd, go through
__udiv_w_sdiv (defined in libgcc or elsewhere). */
#if !defined (udiv_qrnnd) && defined (sdiv_qrnnd)
#define udiv_qrnnd(q, r, nh, nl, d) \
do { \
USItype __r; \
(q) = __udiv_w_sdiv (&__r, nh, nl, d); \
(r) = __r; \
} while (0)
#endif
/* If udiv_qrnnd was not defined for this processor, use __udiv_qrnnd_c. */
#if !defined (udiv_qrnnd)
#define UDIV_NEEDS_NORMALIZATION 1
#define udiv_qrnnd __udiv_qrnnd_c
#endif
#if !defined (count_leading_zeros)
extern const UQItype __clz_tab[];
#define count_leading_zeros(count, x) \
do { \
UWtype __xr = (x); \
UWtype __a; \
\
if (W_TYPE_SIZE <= 32) \
{ \
__a = __xr < ((UWtype)1<<2*__BITS4) \
? (__xr < ((UWtype)1<<__BITS4) ? 0 : __BITS4) \
: (__xr < ((UWtype)1<<3*__BITS4) ? 2*__BITS4 : 3*__BITS4); \
} \
else \
{ \
for (__a = W_TYPE_SIZE - 8; __a > 0; __a -= 8) \
if (((__xr >> __a) & 0xff) != 0) \
break; \
} \
\
(count) = W_TYPE_SIZE - (__clz_tab[__xr >> __a] + __a); \
} while (0)
#define COUNT_LEADING_ZEROS_0 W_TYPE_SIZE
#endif
#if !defined (count_trailing_zeros)
/* Define count_trailing_zeros using count_leading_zeros. The latter might be
defined in asm, but if it is not, the C version above is good enough. */
#define count_trailing_zeros(count, x) \
do { \
UWtype __ctz_x = (x); \
UWtype __ctz_c; \
count_leading_zeros (__ctz_c, __ctz_x & -__ctz_x); \
(count) = W_TYPE_SIZE - 1 - __ctz_c; \
} while (0)
#endif
#ifndef UDIV_NEEDS_NORMALIZATION
#define UDIV_NEEDS_NORMALIZATION 0
#endif