mirror of
git://gcc.gnu.org/git/gcc.git
synced 2024-12-19 12:29:44 +08:00
225e4f43cc
* config/sh/lib1funcs.asm (___movstr_i4_even, ___movstr_i4_odd): Define.
(___movstrSI12_i4, ___sdivsi3_i4, ___udivsi3_i4): Define.
* sh.c (reg_class_from_letter, regno_reg_class): Add DF_REGS.
(fp_reg_names, assembler_dialect): New variables.
(print_operand_address): Handle SUBREGs.
(print_operand): Added 'o' case.
Don't use adj_offsettable_operand on PRE_DEC / POST_INC.
Name of FP registers depends on mode.
(expand_block_move): Emit different code for SH4 hardware.
(prepare_scc_operands): Use emit_sf_insn / emit_df_insn as appropriate.
(from_compare): Likewise.
(add_constant): New argument last_value. Changed all callers.
(find_barrier): Don't try HImode load for FPUL_REG.
(machine_dependent_reorg): Likewise.
(sfunc_uses_reg): A CLOBBER cannot be the address register use.
(gen_far_branch): Emit a barrier after the new jump.
(barrier_align): Don't trust instruction lengths before
fixing up pcloads.
(machine_dependent_reorg): Add support for FIRST_XD_REG .. LAST_XD_REG.
Use auto-inc addressing for fp registers if doubles need to
be loaded in two steps.
Set sh_flag_remove_dead_before_cse.
(push): Support for TARGET_FMOVD. Use gen_push_fpul for fpul.
(pop): Support for TARGET_FMOVD. Use gen_pop_fpul for fpul.
(calc_live_regs): Support for TARGET_FMOVD. Don't save FPSCR.
Support for FIRST_XD_REG .. LAST_XD_REG.
(sh_expand_prologue): Support for FIRST_XD_REG .. LAST_XD_REG.
(sh_expand_epilogue): Likewise.
(sh_builtin_saveregs): Use DFmode moves for fp regs on SH4.
(initial_elimination_offset): Take TARGET_ALIGN_DOUBLE into account.
(arith_reg_operand): FPUL_REG is OK for SH4.
(fp_arith_reg_operand, fp_extended_operand) New functions.
(tertiary_reload_operand, fpscr_operand): Likewise.
(commutative_float_operator, noncommutative_float_operator): Likewise.
(binary_float_operator, get_fpscr_rtx, emit_sf_insn): Likewise.
(emit_df_insn, expand_sf_unop, expand_sf_binop): Likewise.
(expand_df_unop, expand_df_binop, expand_fp_branch): Likewise.
(emit_fpscr_use, mark_use, remove_dead_before_cse): Likewise.
* sh.h (CPP_SPEC): Add support for -m4, m4-single, m4-single-only.
(CONDITIONAL_REGISTER_USAGE): Likewise.
(HARD_SH4_BIT, FPU_SINGLE_BIT, SH4_BIT, FMOVD_BIT): Define.
(TARGET_CACHE32, TARGET_SUPERSCALAR, TARGET_HARWARD): Define.
(TARGET_HARD_SH4, TARGET_FPU_SINGLE, TARGET_SH4, TARGET_FMOVD): Define.
(target_flag): Add -m4, m4-single, m4-single-only, -mfmovd.
(OPTIMIZATION_OPTIONS): If optimizing, set flag_omit_frame_pointer
to -1 and sh_flag_remove_dead_before_cse to 1.
(ASSEMBLER_DIALECT): Define to assembler_dialect.
(assembler_dialect, fp_reg_names): Declare.
(OVERRIDE_OPTIONS): Add code for TARGET_SH4.
Hide names of registers that are not accessible.
(CACHE_LOG): Take TARGET_CACHE32 into account.
(LOOP_ALIGN): Take TARGET_HARWARD into account.
(FIRST_XD_REG, LAST_XD_REG, FPSCR_REG): Define.
(FIRST_PSEUDO_REGISTER: Now 49.
(FIXED_REGISTERS, CALL_USED_REGISTERS): Include values for registers.
(HARD_REGNO_NREGS): Special treatment of FIRST_XD_REG .. LAST_XD_REG.
(HARD_REGNO_MODE_OK): Update.
(enum reg_class): Add DF_REGS and FPSCR_REGS.
(REG_CLASS_NAMES, REG_CLASS_CONTENTS, REG_ALLOC_ORDER): Likewise.
(SECONDARY_OUTPUT_RELOAD_CLASS, SECONDARY_INPUT_RELOAD_CLASS): Update.
(CLASS_CANNOT_CHANGE_SIZE, DEBUG_REGISTER_NAMES): Define.
(NPARM_REGS): Eight floating point parameter registers on SH4.
(BASE_RETURN_VALUE_REG): SH4 also passes double values
in floating point registers.
(GET_SH_ARG_CLASS) Likewise.
Complex float types are also returned in float registers.
(BASE_ARG_REG): Complex float types are also passes in float registers.
(FUNCTION_VALUE): Change mode like PROMOTE_MODE does.
(LIBCALL_VALUE): Remove trailing semicolon.
(ROUND_REG): Round when double precision value is passed in floating
point register(s).
(FUNCTION_ARG_ADVANCE): No change wanted for SH4 when things are
passed on the stack.
(FUNCTION_ARG): Little endian adjustment for SH4 SFmode.
(FUNCTION_ARG_PARTIAL_NREGS): Zero for SH4.
(TRAMPOLINE_ALIGNMENT): Take TARGET_HARWARD into account.
(INITIALIZE_TRAMPOLINE): Emit ic_invalidate_line for TARGET_HARWARD.
(MODE_DISP_OK_8): Not for SH4 DFmode.
(GO_IF_LEGITIMATE_ADDRESS): No base reg + index reg for SH4 DFmode.
Allow indexed addressing for PSImode after reload.
(LEGITIMIZE_ADDRESS): Not for SH4 DFmode.
(LEGITIMIZE_RELOAD_ADDRESS): Handle SH3E SFmode.
Don't change SH4 DFmode nor PSImode RELOAD_FOR_INPUT_ADDRESS.
(DOUBLE_TYPE_SIZE): 64 for SH4.
(RTX_COSTS): Add PLUS case.
Increae cost of ASHIFT, ASHIFTRT, LSHIFTRT case.
(REGISTER_MOVE_COST): Add handling of R0_REGS, FPUL_REGS, T_REGS,
MAC_REGS, PR_REGS, DF_REGS.
(REGISTER_NAMES): Use fp_reg_names.
(enum processor_type): Add PROCESSOR_SH4.
(sh_flag_remove_dead_before_cse): Declare.
(rtx_equal_function_value_matters, fpscr_rtx, get_fpscr_rtx): Declare.
(PREDICATE_CODES): Add binary_float_operator,
commutative_float_operator, fp_arith_reg_operand, fp_extended_operand,
fpscr_operand, noncommutative_float_operator.
(ADJUST_COST): Use different scale for TARGET_SUPERSCALAR.
(SH_DYNAMIC_SHIFT_COST): Cheaper for SH4.
* sh.md (attribute cpu): Add value sh4.
(attrbutes fmovd, issues): Define.
(attribute type): Add values dfp_arith, dfp_cmp, dfp_conv, dfdiv.
(function units memory, int, mpy, fp): Make dependent on issue rate.
(function units issue, single_issue, load_si, load): Define.
(function units load_store, fdiv, gp_fpul): Define.
(attribute hit_stack): Provide proper default.
(use_sfunc_addr+1, udivsi3): Predicated on ! TARGET_SH4.
(udivsi3_i4, udivsi3_i4_single, divsi3_i4, divsi3_i4_single): New insns.
(udivsi3, divsi3): Emit special patterns for SH4 hardware,
(mulsi3_call): Now uses match_operand for function address.
(mulsi3): Also emit code for SH1 case. Wrap result in REG_LIBCALL /
REG_RETVAL notes.
(push, pop, push_e, pop_e): Now define_expands.
(push_fpul, push_4, pop_fpul, pop_4, ic_invalidate_line): New expanders.
(movsi_ie): Added y/i alternative.
(ic_invalidate_line_i, movdf_i4): New insns.
(movdf_i4+[123], reload_outdf+[12345], movsi_y+[12]): New splitters.
(reload_indf, reload_outdf, reload_outsf, reload_insi): New expanders.
(movdf): Add special code for SH4.
(movsf_ie, movsf_ie+1, reload_insf, calli): Make use of fpscr visible.
(call_valuei, calli, call_value): Likewise.
(movsf): Emit no-op move.
(mov_nop, movsi_y): New insns.
(blt, sge): generalize to handle DFmode.
(return predicate): Call emit_fpscr_use and remove_dead_before_cse.
(block_move_real, block_lump_real): Predicate on ! TARGET_HARD_SH4.
(block_move_real_i4, block_lump_real_i4, fpu_switch): New insns.
(fpu_switch0, fpu_switch1, movpsi): New expanders.
(fpu_switch+[12], fix_truncsfsi2_i4_2+1): New splitters.
(toggle_sz): New insn.
(addsf3, subsf3, mulsf3, divsf3): Now define_expands.
(addsf3_i, subsf3_i, mulsf3_i4, mulsf3_ie, divsf3_i): New insns.
(macsf3): Make use of fpscr visible. Disable for SH4.
(floatsisf2): Make use of fpscr visible.
(floatsisf2_i4): New insn.
(floatsisf2_ie, fixsfsi, cmpgtsf_t, cmpeqsf_t): Disable for SH4.
(ieee_ccmpeqsf_t): Likewise.
(fix_truncsfsi2): Emit different code for SH4.
(fix_truncsfsi2_i4, fix_truncsfsi2_i4_2, cmpgtsf_t_i4): New insns.
(cmpeqsf_t_i4, ieee_ccmpeqsf_t_4): New insns.
(negsf2, sqrtsf2, abssf2): Now expanders.
(adddf3, subdf3i, muldf2, divdf3, floatsidf2): New expanders.
(negsf2_i, sqrtsf2_i, abssf2_i, adddf3_i, subdf3_i): New insns.
(muldf3_i, divdf3_i, floatsidf2_i, fix_truncdfsi2_i): New insns.
(fix_truncdfsi2, cmpdf, negdf2, sqrtdf2, absdf2): New expanders.
(fix_truncdfsi2_i4, cmpgtdf_t, cmpeqdf_t, ieee_ccmpeqdf_t): New insns.
(fix_truncdfsi2_i4_2+1): New splitters.
(negdf2_i, sqrtdf2_i, absdf2_i, extendsfdf2_i4): New insns.
(extendsfdf2, truncdfsf2): New expanders.
(truncdfsf2_i4): New insn.
* t-sh (LIB1ASMFUNCS): Add _movstr_i4, _sdivsi3_i4, _udivsi3_i4.
(MULTILIB_OPTIONS): Add m4-single-only/m4-single/m4.
* float-sh.h: When testing for __SH3E__, also test for
__SH4_SINGLE_ONLY__ .
* va-sh.h (__va_freg): Define to float.
(__va_greg, __fa_freg, __gnuc_va_list, va_start):
Define for __SH4_SINGLE_ONLY__ like for __SH3E__ .
(__PASS_AS_FLOAT, __TARGET_SH4_P): Likewise.
(__PASS_AS_FLOAT): Use different definition for __SH4__ and
__SH4_SINGLE__.
(TARGET_SH4_P): Define.
(va_arg): Use it.
* sh.md (movdf_k, movsf_i): Tweak the condition so that
init_expr_once is satisfied about the existence of load / store insns.
* sh.md (movsi_i, movsi_ie, movsi_i_lowpart, movsf_i, movsf_ie):
change m constraint in source operand to mr / mf .
* va-sh.h (__va_arg_sh1): Use __asm instead of asm.
* (__VA_REEF): Define.
(__va_arg_sh1): Use it.
* va-sh.h (va_start, va_arg, va_copy): Add parenteses.
From-SVN: r23777
|
||
|---|---|---|
| config | ||
| contrib | ||
| etc | ||
| gcc | ||
| include | ||
| INSTALL | ||
| libchill | ||
| libf2c | ||
| libiberty | ||
| libio | ||
| libobjc | ||
| libstdc++ | ||
| texinfo | ||
| .cvsignore | ||
| ChangeLog | ||
| config-ml.in | ||
| config.guess | ||
| config.if | ||
| config.sub | ||
| configure | ||
| configure.in | ||
| COPYING | ||
| COPYING.LIB | ||
| install-sh | ||
| ltconfig | ||
| ltmain.sh | ||
| MAINTAINERS | ||
| Makefile.in | ||
| missing | ||
| mkinstalldirs | ||
| move-if-change | ||
| README | ||
| symlink-tree | ||
| ylwrap | ||
README for GNU development tools This directory contains various GNU compilers, assemblers, linkers, debuggers, etc., plus their support routines, definitions, and documentation. Check the INSTALL directory for detailed configuration and installation instructions. Much of the code and documentation enclosed is copyright by the Free Software Foundation, Inc. See the file COPYING or COPYING.LIB in the various directories, for a description of the GNU General Public License terms under which you can copy the files. REPORTING BUGS: Again, see gdb/README, binutils/README, etc., for info on where and how to report problems.