mirror of
git://gcc.gnu.org/git/gcc.git
synced 2025-04-23 02:10:26 +08:00
7d126e2bbb
Enabling cobol explicitly (at least unconditionally) in gcc_release has the disadvantage that the script no longer works for GCC <= 14, I think it would be better to keep it working for all still supported release branches. And as mentioned in the PR, we still don't generate the --enable-generated-files-in-srcdir extras/infos/man pages for languages not actually enabled. Using --enable-languages=all would mean gcc_release takes far longer and more importantly, various FEs have extra dependencies, Ada requires a working Ada compiler (furthermore not newer than the gcc release, so if I run this on a system with say GCC 15 installed, even when I have Ada installed, I won't be able to gcc_release GCC 14 or 13 etc.), D working D compiler, Go takes a long time to build libgo. So, the following patch instead takes similar approach to what make regenerate-opt-urls takes, it generates stuff even for non-enabled languages. For most languages it works just fine and is a matter of say for cobol make cobol.srcextra cobol.srcinfo cobol.srcman The only problem is Modula 2, which has some messed up dependencies and when the FE is not enabled, this will try to build the whole FE as well and fail. I think it would be useful to fix that but at least before that is fixed on the trunk and all release branches, the following patch just conditionally (so that it works even for GCC 12 which doesn't have Modula 2) enables also m2. And lastly, libffi seems to be only enabled for Go (and maybe D), I'd prefer not to enable those languages for the reasons stated above, so if we really need libffi.info in release tarballs (despite libffi being used only as implementation detail and not installed), the patch just generates it by hand. 2025-03-29 Jakub Jelinek <jakub@redhat.com> PR other/119510 * gcc_release: Use --enable-languages=c,c++,lto and if m2 is available, with,m2 appended to that. Check for all possible languages and run make $lang.srcextra $lang.srcinfo $lang.srcman for those. Add libffi/doc/libffi.info.
808 lines
24 KiB
Bash
Executable File
808 lines
24 KiB
Bash
Executable File
#! /bin/sh
|
|
|
|
########################################################################
|
|
#
|
|
# File: gcc_release
|
|
# Author: Jeffrey Law, Bernd Schmidt, Mark Mitchell
|
|
# Date: 2001-05-25
|
|
#
|
|
# Contents:
|
|
# Script to create a GCC release.
|
|
#
|
|
# Copyright (c) 2001-2020 Free Software Foundation.
|
|
#
|
|
# This file is part of GCC.
|
|
#
|
|
# GCC is free software; you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License as published by
|
|
# the Free Software Foundation; either version 3, or (at your option)
|
|
# any later version.
|
|
#
|
|
# GCC is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
# GNU General Public License for more details.
|
|
#
|
|
# You should have received a copy of the GNU General Public License
|
|
# along with GCC; see the file COPYING3. If not see
|
|
# <https://www.gnu.org/licenses/>.
|
|
#
|
|
########################################################################
|
|
|
|
########################################################################
|
|
# Notes
|
|
########################################################################
|
|
|
|
# Here is an example usage of this script, to create a GCC 3.0.2
|
|
# prerelease:
|
|
#
|
|
# gcc_release -r 3.0.2
|
|
#
|
|
# This script will automatically use the head of the release branch
|
|
# to generate the release.
|
|
|
|
########################################################################
|
|
# Functions
|
|
########################################################################
|
|
|
|
# Issue the error message given by $@ and exit with a non-zero
|
|
# exit code.
|
|
|
|
error() {
|
|
echo "gcc_release: error: $@"
|
|
exit 1
|
|
}
|
|
|
|
# Issue the informational message given by $@.
|
|
|
|
inform() {
|
|
echo "gcc_release: $@"
|
|
}
|
|
|
|
# Issue a usage message explaining how to use this script.
|
|
|
|
usage() {
|
|
cat <<EOF
|
|
gcc_release -r release [-f] [further options]
|
|
gcc_release -s name:gitbranch [further options]
|
|
|
|
Options:
|
|
|
|
-r release Version of the form X.Y or X.Y.Z.
|
|
-s name:gitbranch Create a snapshot, not a real release.
|
|
|
|
-d destination Local working directory where we will build the release
|
|
(default=${HOME}).
|
|
-f Create a final release (and update ChangeLogs,...).
|
|
-l Indicate that we are running on gcc.gnu.org.
|
|
-p previous-tarball Location of a previous tarball (to generate diff files).
|
|
-t tag Tag to mark the release in git.
|
|
-u username Username for upload operations.
|
|
-b local-git-repo Local git repository to speed up cloning.
|
|
EOF
|
|
exit 1
|
|
}
|
|
|
|
# Change to the directory given by $1.
|
|
|
|
changedir() {
|
|
cd $1 || \
|
|
error "Could not change directory to $1"
|
|
}
|
|
|
|
# Build the source tree that will be the basis for the release
|
|
# in ${WORKING_DIRECTORY}/gcc-${RELEASE}.
|
|
|
|
build_sources() {
|
|
# If the WORKING_DIRECTORY already exists, do not risk destroying it.
|
|
if [ -r ${WORKING_DIRECTORY} ]; then
|
|
error "\`${WORKING_DIRECTORY}' already exists"
|
|
fi
|
|
# Create the WORKING_DIRECTORY.
|
|
mkdir "${WORKING_DIRECTORY}" \
|
|
|| error "Could not create \`${WORKING_DIRECTORY}'"
|
|
changedir "${WORKING_DIRECTORY}"
|
|
|
|
# Check out the sources.
|
|
if [ -n "${GIT_REFERENCE}" ]; then
|
|
${GIT} clone -q --dissociate --reference "${GIT_REFERENCE}" \
|
|
-b "${GITBRANCH}" "${GITROOT}" "`basename ${SOURCE_DIRECTORY}`" || \
|
|
error "Could not check out release sources"
|
|
else
|
|
${GIT} clone -q -b "${GITBRANCH}" "${GITROOT}" "`basename ${SOURCE_DIRECTORY}`" || \
|
|
error "Could not check out release sources"
|
|
fi
|
|
|
|
# If this is a final release, make sure that the ChangeLogs
|
|
# and version strings are updated.
|
|
if [ ${FINAL} -ne 0 ]; then
|
|
inform "Updating ChangeLogs and version files"
|
|
|
|
grep -q "gcc-${RELEASE_MAJOR}/index.html gcc-${RELEASE_MAJOR}/changes.html" \
|
|
${SOURCE_DIRECTORY}/contrib/gennews ||\
|
|
error "New release not listed in contrib/gennews"
|
|
|
|
${SOURCE_DIRECTORY}/contrib/gennews > NEWS ||\
|
|
error "Could not regenerate NEWS files"
|
|
|
|
grep -q "no releases of GCC ${RELEASE_MAJOR} have yet been made" NEWS &&\
|
|
error "gcc-${RELEASE_MAJOR}/index.html has not been updated yet"
|
|
|
|
grep -q "GCC ${RELEASE_MAJOR} has not been released yet" NEWS &&\
|
|
error "gcc-${RELEASE_MAJOR}/changes.html has not been updated yet"
|
|
|
|
thisindex="http:\/\/gcc.gnu.org\/gcc-${RELEASE_MAJOR}\/index.html"
|
|
thischanges="http:\/\/gcc.gnu.org\/gcc-${RELEASE_MAJOR}\/changes.html"
|
|
previndex="http:\/\/gcc.gnu.org\/gcc-`expr ${RELEASE_MAJOR} - 1`\/index.html"
|
|
sed -n -e "/^${thisindex}/,/^${thischanges}/p" NEWS |\
|
|
sed -n -e "/Release History/,/References and Acknowledgments/p" |\
|
|
grep -q "^[[:blank:]]*GCC ${RELEASE_MAJOR}.${RELEASE_MINOR}" ||\
|
|
error "GCC ${RELEASE_MAJOR}.${RELEASE_MINOR} not mentioned "\
|
|
"in gcc-${RELEASE_MAJOR}/index.html"
|
|
|
|
sed -n -e "/^${thischanges}/,/^${previndex}/p" NEWS |\
|
|
grep -q "^[[:blank:]]*GCC ${RELEASE_MAJOR}.${RELEASE_MINOR}" ||\
|
|
error "GCC ${RELEASE_MAJOR}.${RELEASE_MINOR} not mentioned "\
|
|
"in gcc-${RELEASE_MAJOR}/changes.html"
|
|
|
|
rm -f NEWS
|
|
|
|
commit_files=""
|
|
for x in `changedir ${SOURCE_DIRECTORY} && \
|
|
find . -name ChangeLog`; do
|
|
# Update this ChangeLog file only if it does not yet contain the
|
|
# entry we are going to add. (This is a safety net for repeated
|
|
# runs of this script for the same release.)
|
|
if ! grep "GCC ${RELEASE} released." ${SOURCE_DIRECTORY}/${x} > /dev/null ; then
|
|
cat - ${SOURCE_DIRECTORY}/${x} > ${SOURCE_DIRECTORY}/${x}.new <<EOF
|
|
${LONG_DATE} Release Manager
|
|
|
|
* GCC ${RELEASE} released.
|
|
|
|
EOF
|
|
mv ${SOURCE_DIRECTORY}/${x}.new ${SOURCE_DIRECTORY}/${x} \
|
|
|| error "Could not update ${x}"
|
|
commit_files="${commit_files} ${x}"
|
|
fi
|
|
done
|
|
|
|
# Update gcc/DEV-PHASE.
|
|
|
|
if [ `cat ${SOURCE_DIRECTORY}/gcc/BASE-VER` != ${RELEASE} ]; then
|
|
[ ${RELEASE_MAJOR} -lt 5 ] && \
|
|
error "Release number ${RELEASE} does not match BASE-VER"
|
|
if [ `cat ${SOURCE_DIRECTORY}/gcc/BASE-VER` \
|
|
= ${RELEASE_MAJOR}.`expr ${RELEASE_MINOR} - 1`.1 \
|
|
-a x${RELEASE_REVISION} = x0 ]; then
|
|
(changedir ${SOURCE_DIRECTORY}/gcc && \
|
|
echo ${RELEASE} > BASE-VER) || \
|
|
error "Could not update BASE-VER"
|
|
commit_files="${commit_files} gcc/BASE-VER"
|
|
else
|
|
error "Release number ${RELEASE} does not immediately follow BASE-VER"
|
|
fi
|
|
fi
|
|
(changedir ${SOURCE_DIRECTORY}/gcc && \
|
|
: > DEV-PHASE) || \
|
|
error "Could not update DEV-PHASE"
|
|
commit_files="${commit_files} gcc/DEV-PHASE"
|
|
|
|
(changedir ${SOURCE_DIRECTORY} && \
|
|
${GIT} commit -q -m 'Update ChangeLog and version files for release' ${commit_files} && \
|
|
${GIT} push) || \
|
|
error "Could not commit ChangeLog and version file updates"
|
|
|
|
# Make sure we tag the sources for a final release.
|
|
TAG="releases/gcc-${RELEASE}"
|
|
fi
|
|
|
|
# Tag the sources.
|
|
if [ -n "${TAG}" ]; then
|
|
inform "Tagging sources as ${TAG}"
|
|
# We don't want to overwrite an existing tag. So, if the tag
|
|
# already exists, issue an error message; the release manager can
|
|
# manually remove the tag if appropriate.
|
|
if (changedir ${SOURCE_DIRECTORY} && \
|
|
${GIT} rev-parse "refs/tags/${TAG}" > /dev/null 2>&1); then
|
|
error "Tag ${TAG} already exists"
|
|
fi
|
|
(changedir ${SOURCE_DIRECTORY} && \
|
|
${GIT} tag -s -m "GCC ${RELEASE} release" "${TAG}" && \
|
|
${GIT} push origin tag "${TAG}") || \
|
|
error "Could not tag sources"
|
|
GITBRANCH=${TAG}
|
|
fi
|
|
|
|
GITREV=`cd ${SOURCE_DIRECTORY} && ${GIT} rev-parse HEAD`
|
|
inform "Sources are commit ${GITREV}"
|
|
|
|
# Make sure there are no uncommitted changes in the sources.
|
|
status=${WORKING_DIRECTORY}/gitstatus.$$
|
|
(changedir ${SOURCE_DIRECTORY} && \
|
|
${GIT} status --porcelain --ignored > "$status") || \
|
|
error "Could not get source directory status"
|
|
if [ -s "$status" ]; then
|
|
cat "$status"
|
|
error "Source directory has unexpected changes"
|
|
fi
|
|
rm "$status"
|
|
|
|
# Remove .git from the sources.
|
|
rm -rf "${SOURCE_DIRECTORY}/.git" || \
|
|
error "Could not remove .git from sources"
|
|
|
|
# Run gcc_update on them to set up the timestamps nicely, and (re)write
|
|
# the LAST_UPDATED file containing the git tag/revision used.
|
|
changedir "gcc-${RELEASE}"
|
|
contrib/gcc_update --touch
|
|
echo "Obtained from git: ${GITBRANCH} revision ${GITREV}" > LAST_UPDATED
|
|
|
|
# For a prerelease or real release, we need to generate additional
|
|
# files not present in git.
|
|
changedir "${SOURCE_DIRECTORY}"
|
|
if [ $SNAPSHOT -ne 1 ]; then
|
|
# Generate the documentation.
|
|
inform "Building install docs"
|
|
SOURCEDIR=${SOURCE_DIRECTORY}/gcc/doc
|
|
DESTDIR=${SOURCE_DIRECTORY}/INSTALL
|
|
export SOURCEDIR
|
|
export DESTDIR
|
|
${SOURCE_DIRECTORY}/gcc/doc/install.texi2html
|
|
|
|
# Regenerate the NEWS file.
|
|
contrib/gennews > NEWS || \
|
|
error "Could not regenerate NEWS files"
|
|
|
|
# Now, we must build the compiler in order to create any generated
|
|
# files that are supposed to go in the source directory. This is
|
|
# also a good sanity check to make sure that the release builds
|
|
# on at least one platform.
|
|
inform "Building compiler"
|
|
OBJECT_DIRECTORY=../objdir
|
|
num_cpus=1
|
|
if type -p getconf 2>/dev/null; then
|
|
num_cpus=`getconf _NPROCESSORS_ONLN 2>/dev/null`
|
|
case "$num_cpus" in
|
|
'' | 0* | *[!0-9]*) num_cpus=1;;
|
|
esac
|
|
fi
|
|
enable_langs=c,c++,lto
|
|
if [ -f ${SOURCE_DIRECTORY}/gcc/m2/Make-lang.in ]; then
|
|
enable_langs=$enable_langs,m2
|
|
fi
|
|
contrib/gcc_build -d ${SOURCE_DIRECTORY} -o ${OBJECT_DIRECTORY} \
|
|
-c "--enable-languages=$enable_langs --enable-generated-files-in-srcdir --disable-multilib" \
|
|
-m "-j$num_cpus" build || \
|
|
error "Could not rebuild GCC"
|
|
cd ${OBJECT_DIRECTORY}/gcc
|
|
all_languages=`sed -n -e '/"all_languages"/s/^.*=//p' config.status \
|
|
| sed -e 's/"//g'`
|
|
for lang in $all_languages; do
|
|
make $lang.srcextra $lang.srcinfo $lang.srcman || \
|
|
error "Could not build GCC $lang source extras"
|
|
done
|
|
if [ -d ${SOURCE_DIRECTORY}/libffi/doc ]; then
|
|
makeinfo --split-size=5000000 -I ${SOURCE_DIRECTORY}/gcc/doc/include \
|
|
-I ${SOURCE_DIRECTORY}/libffi/doc/ -o ${SOURCE_DIRECTORY}/libffi/doc/libffi.info \
|
|
${SOURCE_DIRECTORY}/libffi/doc/libffi.texi || \
|
|
error "Could not build libffi.info"
|
|
fi
|
|
cd ${SOURCE_DIRECTORY}
|
|
fi
|
|
|
|
# Move message catalogs to source directory.
|
|
mv ../objdir/gcc/po/*.gmo gcc/po/
|
|
[ -f libcpp/po/cpplib.pot ] && mv ../objdir/libcpp/po/*.gmo libcpp/po/
|
|
|
|
# Create a "MD5SUMS" file to use for checking the validity of the release.
|
|
echo \
|
|
"# This file contains the MD5 checksums of the files in the
|
|
# gcc-"${RELEASE}".tar.xz tarball.
|
|
#
|
|
# Besides verifying that all files in the tarball were correctly expanded,
|
|
# it also can be used to determine if any files have changed since the
|
|
# tarball was expanded or to verify that a patchfile was correctly applied.
|
|
#
|
|
# Suggested usage:
|
|
# md5sum -c MD5SUMS | grep -v \"OK$\"
|
|
#" > MD5SUMS
|
|
|
|
find . -type f |
|
|
sed -e 's:^\./::' -e '/MD5SUMS/d' |
|
|
sort |
|
|
xargs md5sum >>MD5SUMS
|
|
}
|
|
|
|
# Build a single tarfile. The first argument is the name of the tarfile
|
|
# to build, without any suffixes. They will be added automatically. The
|
|
# rest of the arguments are files or directories to include, and possibly
|
|
# other arguments to tar.
|
|
|
|
build_tarfile() {
|
|
# Get the name of the destination tar file.
|
|
TARFILE="$1.tar.xz"
|
|
shift
|
|
|
|
# Build the tar file itself.
|
|
(${TAR} cf - "$@" | ${XZ} > ${TARFILE}) || \
|
|
error "Could not build tarfile"
|
|
FILE_LIST="${FILE_LIST} ${TARFILE}"
|
|
}
|
|
|
|
# Build the various tar files for the release.
|
|
|
|
build_tarfiles() {
|
|
inform "Building tarfiles"
|
|
|
|
changedir "${WORKING_DIRECTORY}"
|
|
|
|
# The GNU Coding Standards specify that all files should
|
|
# world readable.
|
|
chmod -R a+r ${SOURCE_DIRECTORY}
|
|
# And that all directories have mode 755.
|
|
find ${SOURCE_DIRECTORY} -type d -exec chmod 755 {} \;
|
|
|
|
# Build one huge tarfile for the entire distribution.
|
|
build_tarfile gcc-${RELEASE} `basename ${SOURCE_DIRECTORY}`
|
|
}
|
|
|
|
# Build .gz files.
|
|
build_gzip() {
|
|
for f in ${FILE_LIST}; do
|
|
target=${f%.xz}.gz
|
|
(${XZ} -d -c $f | ${GZIP} > ${target}) || error "Could not create ${target}"
|
|
done
|
|
}
|
|
|
|
# Build diffs against an old release.
|
|
build_diffs() {
|
|
old_dir=${1%/*}
|
|
old_file=${1##*/}
|
|
case "$old_file" in
|
|
*.tar.xz) old_vers=${old_file%.tar.xz};;
|
|
*) old_vers=${old_file%.tar.bz2};;
|
|
esac
|
|
old_vers=${old_vers#gcc-}
|
|
inform "Building diffs against version $old_vers"
|
|
for f in gcc; do
|
|
if [ -e ${old_dir}/${f}-${old_vers}.tar.xz ]; then
|
|
old_tar=${old_dir}/${f}-${old_vers}.tar.xz
|
|
else
|
|
old_tar=${old_dir}/${f}-${old_vers}.tar.bz2
|
|
fi
|
|
new_tar=${WORKING_DIRECTORY}/${f}-${RELEASE}.tar.xz
|
|
if [ ! -e $old_tar ]; then
|
|
inform "$old_tar not found; not generating diff file"
|
|
elif [ ! -e $new_tar ]; then
|
|
inform "$new_tar not found; not generating diff file"
|
|
else
|
|
build_diff $old_tar gcc-${old_vers} $new_tar gcc-${RELEASE} \
|
|
${f}-${old_vers}-${RELEASE}.diff.xz
|
|
fi
|
|
done
|
|
}
|
|
|
|
# Build an individual diff.
|
|
build_diff() {
|
|
changedir "${WORKING_DIRECTORY}"
|
|
tmpdir=gccdiff.$$
|
|
mkdir $tmpdir || error "Could not create directory $tmpdir"
|
|
changedir $tmpdir
|
|
case "$1" in
|
|
*.tar.bz2)
|
|
(${BZIP2} -d -c $1 | ${TAR} xf - ) || error "Could not unpack $1 for diffs"
|
|
;;
|
|
*.tar.xz)
|
|
(${XZ} -d -c $1 | ${TAR} xf - ) || error "Could not unpack $1 for diffs"
|
|
;;
|
|
esac
|
|
(${XZ} -d -c $3 | ${TAR} xf - ) || error "Could not unpack $3 for diffs"
|
|
${DIFF} $2 $4 > ../${5%.xz}
|
|
if [ $? -eq 2 ]; then
|
|
error "Trouble making diffs from $1 to $3"
|
|
fi
|
|
${XZ} ../${5%.xz} || error "Could not generate ../$5"
|
|
changedir ..
|
|
rm -rf $tmpdir
|
|
FILE_LIST="${FILE_LIST} $5"
|
|
}
|
|
|
|
# Upload the files to the FTP server.
|
|
upload_files() {
|
|
inform "Uploading files"
|
|
|
|
changedir "${WORKING_DIRECTORY}"
|
|
|
|
# Make sure the directory exists on the server.
|
|
if [ $LOCAL -eq 0 ]; then
|
|
${SSH} -l ${GCC_USERNAME} ${GCC_HOSTNAME} \
|
|
mkdir -m 755 -p "${FTP_PATH}/diffs"
|
|
UPLOAD_PATH="${GCC_USERNAME}@${GCC_HOSTNAME}:${FTP_PATH}"
|
|
else
|
|
mkdir -p "${FTP_PATH}/diffs" \
|
|
|| error "Could not create \`${FTP_PATH}'"
|
|
UPLOAD_PATH=${FTP_PATH}
|
|
fi
|
|
|
|
# Then copy files to their respective (sub)directories.
|
|
for x in gcc*.gz gcc*.xz; do
|
|
if [ -e ${x} ]; then
|
|
# Make sure the file will be readable on the server.
|
|
chmod a+r ${x}
|
|
# Copy it.
|
|
case ${x} in
|
|
*.diff.*)
|
|
SUBDIR="diffs/";
|
|
;;
|
|
*)
|
|
SUBDIR="";
|
|
esac
|
|
${SCP} ${x} ${UPLOAD_PATH}/${SUBDIR} \
|
|
|| error "Could not upload ${x}"
|
|
fi
|
|
done
|
|
}
|
|
|
|
# Print description if snapshot exists.
|
|
snapshot_print() {
|
|
if [ -e ${RELEASE}/$1 ]; then
|
|
hash=`openssl sha256 ${RELEASE}/$1 | sed -e 's#(.*)##' -e 's# *= *#=#'`
|
|
hash2=`openssl sha1 ${RELEASE}/$1 | sed -e 's#(.*)##' -e 's# *= *#=#'`
|
|
|
|
printf " %-37s%s\n\n %s\n %s\n\n" "$1" "$2" "$hash" "$hash2" \
|
|
>> ${SNAPSHOT_README}
|
|
|
|
echo " <tr><td><a href=\"$1\">$1</a></td>" >> ${SNAPSHOT_INDEX}
|
|
echo " <td>$2</td></tr>" >> ${SNAPSHOT_INDEX}
|
|
fi
|
|
}
|
|
|
|
# Announce a snapshot, both on the web and via mail.
|
|
announce_snapshot() {
|
|
inform "Updating links and READMEs on the FTP server"
|
|
|
|
TEXT_DATE=`date --date=$DATE +%B\ %d,\ %Y`
|
|
SNAPSHOT_README=${RELEASE}/README
|
|
SNAPSHOT_INDEX=${RELEASE}/index.html
|
|
|
|
changedir "${SNAPSHOTS_DIR}"
|
|
echo \
|
|
"Snapshot gcc-"${RELEASE}" is now available on
|
|
https://gcc.gnu.org/pub/gcc/snapshots/"${RELEASE}"/
|
|
and on various mirrors, see https://gcc.gnu.org/mirrors.html for details.
|
|
|
|
This snapshot has been generated from the GCC "${BRANCH}" git branch
|
|
with the following options: "git://gcc.gnu.org/git/gcc.git branch ${GITBRANCH} revision ${GITREV}"
|
|
|
|
You'll find:
|
|
" > ${SNAPSHOT_README}
|
|
|
|
echo \
|
|
"<html>
|
|
|
|
<head>
|
|
<title>GCC "${RELEASE}" Snapshot</title>
|
|
</head>
|
|
|
|
<body>
|
|
<h1>GCC "${RELEASE}" Snapshot</h1>
|
|
|
|
<p>The <a href =\"https://gcc.gnu.org/\">GCC Project</a> makes
|
|
periodic snapshots of the GCC source tree available to the public
|
|
for testing purposes.</p>
|
|
|
|
<p>If you are planning to download and use one of our snapshots, then
|
|
we highly recommend you join the GCC developers list. Details for
|
|
how to sign up can be found on the GCC project home page.</p>
|
|
|
|
<p>This snapshot has been generated from the GCC "${BRANCH}" git branch
|
|
with the following options: <code>"git://gcc.gnu.org/git/gcc.git branch ${GITBRANCH} revision ${GITREV}"</code></p>
|
|
|
|
<table>" > ${SNAPSHOT_INDEX}
|
|
|
|
snapshot_print gcc-${RELEASE}.tar.xz "Complete GCC"
|
|
|
|
echo \
|
|
"Diffs from "${BRANCH}"-"${LAST_DATE}" are available in the diffs/ subdirectory.
|
|
|
|
When a particular snapshot is ready for public consumption the LATEST-"${BRANCH}"
|
|
link is updated and a message is sent to the gcc list. Please do not use
|
|
a snapshot before it has been announced that way." >> ${SNAPSHOT_README}
|
|
|
|
echo \
|
|
"</table>
|
|
<p>Diffs from "${BRANCH}"-"${LAST_DATE}" are available in the
|
|
<a href=\"diffs/\">diffs/ subdirectory</a>.</p>
|
|
|
|
<p>When a particular snapshot is ready for public consumption the LATEST-"${BRANCH}"
|
|
link is updated and a message is sent to the gcc list. Please do not use
|
|
a snapshot before it has been announced that way.</p>
|
|
|
|
<hr />
|
|
|
|
<address>
|
|
<a href=\"mailto:gcc@gcc.gnu.org\">gcc@gcc.gnu.org</a>
|
|
<br />
|
|
Last modified "${TEXT_DATE}"
|
|
</address>
|
|
</body>
|
|
|
|
</html>" >> ${SNAPSHOT_INDEX}
|
|
|
|
rm -f LATEST-${BRANCH}
|
|
ln -s ${RELEASE} LATEST-${BRANCH}
|
|
|
|
inform "Sending mail"
|
|
|
|
export QMAILHOST=gcc.gnu.org
|
|
mail -s "gcc-${RELEASE} is now available" gcc@gcc.gnu.org < ${SNAPSHOT_README}
|
|
}
|
|
|
|
########################################################################
|
|
# Initialization
|
|
########################################################################
|
|
|
|
LC_ALL=C
|
|
export LC_ALL
|
|
|
|
# Today's date.
|
|
DATE=`date "+%Y%m%d"`
|
|
LONG_DATE=`date "+%Y-%m-%d"`
|
|
|
|
GIT=${GIT:-git}
|
|
# The server containing the GCC repository.
|
|
GIT_SERVER="gcc.gnu.org"
|
|
# The path to the repository on that server.
|
|
GIT_REPOSITORY="/git/gcc.git"
|
|
# The username to use when connecting to the server.
|
|
GIT_USERNAME="${USER}"
|
|
|
|
# The machine to which files will be uploaded.
|
|
GCC_HOSTNAME="gcc.gnu.org"
|
|
# The name of the account on the machine to which files are uploaded.
|
|
GCC_USERNAME="gccadmin"
|
|
# The directory in which the files will be placed (do not use ~user syntax).
|
|
FTP_PATH=/var/ftp/pub/gcc
|
|
# The directory in which snapshots will be placed.
|
|
SNAPSHOTS_DIR=${FTP_PATH}/snapshots
|
|
|
|
# The major number for the release. For release `3.0.2' this would be
|
|
# `3'
|
|
RELEASE_MAJOR=""
|
|
# The minor number for the release. For release `3.0.2' this would be
|
|
# `0'.
|
|
RELEASE_MINOR=""
|
|
# The revision number for the release. For release `3.0.2' this would
|
|
# be `2'.
|
|
RELEASE_REVISION=""
|
|
# The complete name of the release.
|
|
RELEASE=""
|
|
|
|
# The name of the branch from which the release should be made, in a
|
|
# user-friendly form.
|
|
BRANCH=""
|
|
|
|
# The name of the branch from which the release should be made, as used
|
|
# for our version control system.
|
|
GITBRANCH=""
|
|
|
|
# The tag to apply to the sources used for the release.
|
|
TAG=""
|
|
|
|
# The old tarballs from which to generate diffs.
|
|
OLD_TARS=""
|
|
|
|
# Local gcc git checkout to speed up git cloning.
|
|
GIT_REFERENCE=""
|
|
|
|
# The directory that will be used to construct the release. The
|
|
# release itself will be placed in a subdirectory of this directory.
|
|
DESTINATION=${HOME}
|
|
# The subdirectory.
|
|
WORKING_DIRECTORY=""
|
|
# The directory that will contain the GCC sources.
|
|
SOURCE_DIRECTORY=""
|
|
|
|
# Non-zero if this is the final release, rather than a prerelease.
|
|
FINAL=0
|
|
|
|
# Non-zero if we are building a snapshot, and don't build gcc or
|
|
# include generated files.
|
|
SNAPSHOT=0
|
|
|
|
# Non-zero if we are running locally on gcc.gnu.org, and use local CVS
|
|
# and copy directly to the FTP directory.
|
|
LOCAL=0
|
|
|
|
# Major operation modes.
|
|
MODE_GZIP=0
|
|
MODE_DIFFS=0
|
|
MODE_SOURCES=0
|
|
MODE_TARFILES=0
|
|
MODE_UPLOAD=0
|
|
|
|
# List of archive files generated; used to create .gz files from .xz.
|
|
FILE_LIST=""
|
|
|
|
# Programs we use.
|
|
|
|
BZIP2="${BZIP2:-bzip2}"
|
|
XZ="${XZ:-xz -T0 --best}"
|
|
CVS="${CVS:-cvs -f -Q -z9}"
|
|
DIFF="${DIFF:-diff -Nrcpad}"
|
|
ENV="${ENV:-env}"
|
|
GZIP="${GZIP:-gzip --best}"
|
|
SCP="${SCP:-scp -p}"
|
|
SSH="${SSH:-ssh}"
|
|
TAR="${TAR:-tar}"
|
|
|
|
########################################################################
|
|
# Command Line Processing
|
|
########################################################################
|
|
|
|
# Parse the options.
|
|
while getopts "d:fr:u:t:p:s:lb:" ARG; do
|
|
case $ARG in
|
|
d) DESTINATION="${OPTARG}";;
|
|
r) RELEASE="${OPTARG}";;
|
|
t) TAG="${OPTARG}";;
|
|
u) GIT_USERNAME="${OPTARG}";;
|
|
f) FINAL=1;;
|
|
s) SNAPSHOT=1
|
|
BRANCH=${OPTARG%:*}
|
|
GITBRANCH=${OPTARG#*:}
|
|
;;
|
|
l) LOCAL=1
|
|
SCP=cp
|
|
PATH=~:/usr/local/bin:$PATH;;
|
|
p) OLD_TARS="${OLD_TARS} ${OPTARG}"
|
|
if [ ! -f ${OPTARG} ]; then
|
|
error "-p argument must name a tarball"
|
|
fi;;
|
|
b) GIT_REFERENCE="${OPTARG}";;
|
|
\?) usage;;
|
|
esac
|
|
done
|
|
shift `expr ${OPTIND} - 1`
|
|
|
|
# Handle the major modes.
|
|
while [ $# -ne 0 ]; do
|
|
case $1 in
|
|
diffs) MODE_DIFFS=1;;
|
|
gzip) MODE_GZIP=1;;
|
|
sources) MODE_SOURCES=1;;
|
|
tarfiles) MODE_TARFILES=1;;
|
|
upload) MODE_UPLOAD=1;;
|
|
all) MODE_SOURCES=1; MODE_TARFILES=1; MODE_DIFFS=1; MODE_UPLOAD=1;
|
|
if [ $SNAPSHOT -ne 1 ]; then
|
|
# Only for releases and pre-releases.
|
|
MODE_GZIP=1;
|
|
fi
|
|
;;
|
|
*) error "Unknown mode $1";;
|
|
esac
|
|
shift
|
|
done
|
|
|
|
# Perform consistency checking.
|
|
if [ ${LOCAL} -eq 0 ] && [ -z ${GIT_USERNAME} ]; then
|
|
error "No username specified"
|
|
fi
|
|
|
|
if [ ! -d ${DESTINATION} ]; then
|
|
error "\`${DESTINATION}' is not a directory"
|
|
fi
|
|
|
|
if [ $SNAPSHOT -eq 0 ]; then
|
|
if [ -z ${RELEASE} ]; then
|
|
error "No release number specified"
|
|
fi
|
|
|
|
# Compute the major and minor release numbers.
|
|
RELEASE_MAJOR=`echo $RELEASE | awk --assign FS=. '{ print $1; }'`
|
|
RELEASE_MINOR=`echo $RELEASE | awk --assign FS=. '{ print $2; }'`
|
|
RELEASE_REVISION=`echo $RELEASE | awk --assign FS=. '{ print $3; }'`
|
|
|
|
if [ -z "${RELEASE_MAJOR}" ] || [ -z "${RELEASE_MINOR}" ]; then
|
|
error "Release number \`${RELEASE}' is invalid"
|
|
fi
|
|
|
|
# Compute the full name of the release.
|
|
if [ -z "${RELEASE_REVISION}" ]; then
|
|
RELEASE="${RELEASE_MAJOR}.${RELEASE_MINOR}"
|
|
else
|
|
RELEASE="${RELEASE_MAJOR}.${RELEASE_MINOR}.${RELEASE_REVISION}"
|
|
fi
|
|
|
|
# Compute the name of the branch, which is based solely on the major
|
|
# release number.
|
|
GITBRANCH="releases/gcc-${RELEASE_MAJOR}"
|
|
|
|
# If this is not a final release, set various parameters accordingly.
|
|
if [ ${FINAL} -ne 1 ]; then
|
|
RELEASE="${RELEASE}-RC-${DATE}"
|
|
FTP_PATH="${SNAPSHOTS_DIR}/${RELEASE}"
|
|
else
|
|
FTP_PATH="${FTP_PATH}/releases/gcc-${RELEASE}/"
|
|
fi
|
|
else
|
|
RELEASE=${BRANCH}-${DATE}
|
|
FTP_PATH="${FTP_PATH}/snapshots/${RELEASE}"
|
|
|
|
# If diffs are requested when building locally on gcc.gnu.org, we (usually)
|
|
# know what the last snapshot date was and take the corresponding tarballs,
|
|
# unless the user specified tarballs explicitly.
|
|
if [ $MODE_DIFFS -ne 0 ] && [ $LOCAL -ne 0 ] && [ -z "${OLD_TARS}" ]; then
|
|
LAST_DATE=`cat ~/.snapshot_date-${BRANCH}`
|
|
OLD_TARS=${SNAPSHOTS_DIR}/${BRANCH}-${LAST_DATE}/gcc-${BRANCH}-${LAST_DATE}.tar.bz2
|
|
if [ ! -e $OLD_TARS ]; then
|
|
OLD_TARS=${SNAPSHOTS_DIR}/${BRANCH}-${LAST_DATE}/gcc-${BRANCH}-${LAST_DATE}.tar.xz
|
|
fi
|
|
fi
|
|
fi
|
|
|
|
# Compute the name of the WORKING_DIRECTORY and the SOURCE_DIRECTORY.
|
|
WORKING_DIRECTORY="${DESTINATION}/gcc-${RELEASE}"
|
|
SOURCE_DIRECTORY="${WORKING_DIRECTORY}/gcc-${RELEASE}"
|
|
|
|
# Set up GITROOT.
|
|
if [ $LOCAL -eq 0 ]; then
|
|
GITROOT="git+ssh://${GIT_USERNAME}@${GIT_SERVER}${GIT_REPOSITORY}"
|
|
else
|
|
GITROOT="/git/gcc.git"
|
|
fi
|
|
export GITROOT
|
|
|
|
########################################################################
|
|
# Main Program
|
|
########################################################################
|
|
|
|
# Set the timezone to UTC
|
|
TZ="UTC0"
|
|
export TZ
|
|
|
|
# Build the source directory.
|
|
|
|
if [ $MODE_SOURCES -ne 0 ]; then
|
|
build_sources
|
|
fi
|
|
|
|
# Build the tar files.
|
|
|
|
if [ $MODE_TARFILES -ne 0 ]; then
|
|
build_tarfiles
|
|
fi
|
|
|
|
# Build diffs
|
|
|
|
if [ $MODE_DIFFS -ne 0 ]; then
|
|
# Possibly build diffs.
|
|
if [ -n "$OLD_TARS" ]; then
|
|
for old_tar in $OLD_TARS; do
|
|
build_diffs $old_tar
|
|
done
|
|
fi
|
|
fi
|
|
|
|
# Build gzip files
|
|
if [ $MODE_GZIP -ne 0 ]; then
|
|
build_gzip
|
|
fi
|
|
|
|
# Upload them to the FTP server.
|
|
if [ $MODE_UPLOAD -ne 0 ]; then
|
|
upload_files
|
|
|
|
# For snapshots, make some further updates.
|
|
if [ $SNAPSHOT -ne 0 ] && [ $LOCAL -ne 0 ]; then
|
|
announce_snapshot
|
|
|
|
# Update snapshot date file.
|
|
changedir ~
|
|
echo $DATE > .snapshot_date-${BRANCH}
|
|
|
|
# Remove working directory
|
|
rm -rf ${WORKING_DIRECTORY}
|
|
fi
|
|
fi
|