* reload.h (compute_use_by_pseudos): Declare.
* reload1.c (spilled_pseudos, insns_need_reload): New variables.
(something_needs_reloads): Delete variable.
(finish_spills): New function.
(compute_use_by_pseudos): New function.
(delete_caller_save_insns): Lose argument FIRST. All callers changed.
Use the reload_insn_chain instead of walking the rtl directly.
(reload): Allocate and free spilled_pseudos.
Ensure that all calls of spill_hard_reg are followed by a call to
finish_spills.
Use the insns_need_reload list instead of something_needs_reloads
to find out if reload_as_needed must be called.
Clear unused_insn_chains at the end.
(calculate_needs_all_insns): Lose FIRST parameter. All callers
changed.
Delete code to keep track of current basic block.
Walk reload_insn_chain instead of the rtl structure. Build the
insns_need_reload chain.
Remember which insns need reloading/elimination by setting the
appropriate fields in struct insn_chain, not by putting modes on the
insn.
(calculate_needs): Lose THIS_BLOCK arg. Accept arg CHAIN instead of
arg INSN. All callers changed.
Delete declaration of struct needs.
Don't set something_needs_reloads.
Record insn needs in the CHAIN argument.
(spill_hard_reg): Record the affected pseudos in spilled_pseudos.
(reload_as_needed): Lose FIRST arg. All callers changed.
Walk the reload_insn_chain instead of the rtx structure.
Delete code to keep track of current basic block.
Rename one of the NEXT variables to OLD_NEXT.
(allocate_reload_reg): Accept arg CHAIN instead of arg INSN. All
callers changed.
(choose_reload_regs): Likewise.
(emit_reload_insns): Replace INSN and BB args with arg CHAIN. All
callers changed.
* caller-save.c (MOVE_MAX_WORDS): New macro. Use it throughout
instead of (MOVE_MAX / UNITS_PER_WORD) computation.
(hard_regs_live, hard_regs_need_restore): Delete variables.
(n_regs_saved): Now static.
(referenced_regs, this_insn_sets): New variables.
(setup_save_areas): Restructure the code a bit.
(restore_referenced_regs): Delete function.
(mark_referenced_regs): New function, similar to the old
restore_referenced_regs, but mark registers in referenced_regs.
(clear_reg_live): Delete function.
(mark_set_regs): Renamed from set_reg_live. All callers changed.
Only mark registers in this_insn_sets.
(save_call_clobbered_regs): Rework this function to walk the
reload_insn_chain instead of using the list of instructions directly.
Delete code to keep track of register lives, compute live regs on the
fly from information in the chain.
Instead of calling restore_referenced_regs, use mark_referenced_regs,
then walk the set it computes and call insert_restore as appropriate.
(insert_restore): Lose INSN and BLOCK args. Add CHAIN arg. All
callers changed.
Restructure the code a bit. Test hard_regs_saved instead of
hard_regs_need_restore.
(insert_save): Lose INSN and BLOCK args. Add CHAIN and TO_SAVE
args. All callers changed.
Restructure the code a bit. Use TO_SAVE to determine which regs to
save instead of more complicated test.
(insert_one_arg): Lose INSN and BLOCK args. Add CHAIN arg. All
callers changed.
Create a new insn_chain structure for the new insn and place it
into the chain.
* rtl.texi: Update documentation to reflect that reload no longer
puts modes on the insns.
From-SVN: r23074
* function.c (purge_addressof_1): Fix typo in inequality: do
bitfield optimization for equal mode sizes.
* expmed.c (store_bit_field): Don't take subregs of subregs in
the movstrict case. Tidy a potential problem in the multi-word case.
(extract_bit_field): Likewise.
From-SVN: r23066
Tue Oct 13 22:12:11 1998 Bernd Schmidt <crux@pool.informatik.rwth-aachen.de>
* flow.c (find_basic_blocks): Emit NOPs after normal calls in this
function.
Compute max_uid_for_flow by calling get_max_uid after the scan.
(find_basic_blocks_1): Don't emit NOPs here.
From-SVN: r23061
I can't believe I havn't done work on my home machine in
nearly a month...
* alias.c (base_alias_check): Accept new args for the modes of the
two references. Use them to determine if an AND can overlap. Update
all callers.
(memrefs_conflict_p): Assume sizes are aligned, and uses them
to determine if an AND can overlap.
From-SVN: r23060
* tinfo2.cc (fast_compare): Remove.
(before): Just use strcmp.
* tinfo.cc (operator==): Just use strcmp.
* decl.c (grokfndecl): Don't check for linkage in `extern "C"'
declarations.
From-SVN: r23057
* config/m68k/m68k.h (HARD_REGNO_MODE_OK): For FP regs, add REGNO >= 16
check. Add comment to document problems with TARGET_SUN_FPA version
of this macro.
* config/m68k/m68k.md (movxf+1): Support 'r'/'r' moves.
From-SVN: r23056
* Makefile.in (gencheck.o): Depend on gansidecl.h.
* c-common.c (print_char_table): Add missing initializers.
(scan_char_table): Likewise.
(time_char_table): Likewise.
* c-decl.c (c_decode_option): Mark parameter `argc' with
ATTRIBUTE_UNUSED.
(declare_parm_level): Mark parameter `definition_flag' with
ATTRIBUTE_UNUSED.
* c-lex.c (readescape): Use `(unsigned)1' in shift.
(yylex): Likewise. Cast `sizeof' to an (int) when comparing
against one.
* calls.c (store_one_arg): Remove unused parameter `fndecl'. All
callers changed.
(emit_call_1): Mark parameters `fndecl' and `funtype' with
ATTRIBUTE_UNUSED.
(expand_call): Cast result of MIN() to (unsigned int) when
comparing against an unsigned value.
* cccp.c (pcfinclude): Remove unused parameter `limit'. All
callers changed.
(make_definition): Remove unused parameter `op'. All callers
changed.
(create_definition): Cast REST_EXTENSION_LENGTH to (long) when
comparing against the result of pointer arithmetic.
* config/mips/mips.h (FUNCTION_ARG_BOUNDARY): Cast to (unsigned)
when comparing against one.
* dwarf2out.c (dwarf2out_frame_debug): Cast REGNO() and
HARD_FRAME_POINTER_REGNUM to (unsigned) when comparing against
one.
(output_die): Move variable `i' into the scope in which it is
used. Change its type to `unsigned'.
(output_die): Cast the result of `strlen' to (int) when passing it
to ASM_OUTPUT_ASCII().
(output_pubnames): Likewise.
(output_line_info): Likewise.
* emit-rtl.c (global_rtl): Add missing initializers.
* explow.c (promote_mode): Mark parameter `for_call' with
ATTRIBUTE_UNUSED.
* expmed.c (expand_shift): Cast the result of GET_MODE_BITSIZE to
`unsigned HOST_WIDE_INT' when comparing against one.
(synth_mult): Change type of variable `cost' to int.
(emit_store_flag): Use `(unsigned HOST_WIDE_INT) 1' in shift.
* expr.c (copy_blkmode_from_reg): Cast BITS_PER_WORD to (unsigned)
when comparing against one.
(get_inner_reference): Change variable `alignment' to unsigned.
(expand_expr): Cast the result of GET_MODE_ALIGNMENT to (unsigned
int) when comparing against one.
(expand_builtin_setjmp): Change type of variable `i' to size_t.
* fold-const.c (div_and_round_double): Cast BASE to
(HOST_WIDE_INT) when comparing against one.
* gencheck.c: Include gansidecl.h.
(main): Mark parameter `argv' with ATTRIBUTE_UNUSED.
* optabs.c (gen_cond_trap): Mark parameters `code', `op2' and
`tcode' with ATTRIBUTE_UNUSED.
* real.c (edivm): Cast constant value to (unsigned long) in
expression compared against an unsigned value.
* stmt.c (expand_return): Cast BITS_PER_WORD to (unsigned) when
comparing against one.
(expand_end_case): Cast CASE_VALUES_THRESHOLD to (unsigned int)
when comparing against one.
* stor-layout.c (mode_for_size): Cast MAX_FIXED_MODE_SIZE to
(unsigned int) when comparing against one. Likewise for
GET_MODE_BITSIZE.
(smallest_mode_for_size): Likewise.
(save_storage_status): Mark parameter `p' with ATTRIBUTE_UNUSED.
(restore_storage_status): Likewise.
* toplev.c (debug_args): Add missing initializer.
(f_options): Spelling correction. Add missing initializers.
(documented_lang_options): Likewise.
(debug_end_source_file): Mark parameter `lineno' with
ATTRIBUTE_UNUSED.
* tree.c (valid_machine_attribute): Mark parameters `attr_args',
`decl' and `type' with ATTRIBUTE_UNUSED.
* varasm.c (decode_reg_name): Cast `sizeof' expression to (int)
when comparing against one.
(assemble_variable): Mark parameter `top_level' with
ATTRIBUTE_UNUSED.
(assemble_external_libcall): Mark parameter `fun' with
ATTRIBUTE_UNUSED.
(output_constant_pool): Mark parameters `fnname' and `fndecl' with
ATTRIBUTE_UNUSED.
From-SVN: r23054
* cp-tree.h (specializations_of_same_template_p): Remove.
* search.c (get_template_base): Don't use it.
(get_template_base_recursive): Likewise.
* pt.c (specializations_of_same_template_p): Remove.
(unify): Don't use it.
(lookup_template_class): Find the correct parent when setting
CLASSTYPE_TI_TEMPLATE.
From-SVN: r23053
* jcf-dump.c (process_class): Use FATAL_EXIT_CODE, not -1.
(main): Likewise. Exit with SUCCESS_EXIT_CODE at end of
function.
Include <config.h> and "system.h".
(disassemble_method): Undefine RET to avoid clash with
config/i386/i386.h.
From-SVN: r23050
* expr.c (push_block): Handle targets where the stack grows
to higher addresses, but args grow to lower addresses and
ACCUMULATE_OUTGOING_ARGS is not defined.
From-SVN: r23046
1998-10-12 Dave Love <fx@gnu.org>
* Makefile.in (.SUFFIXES): Don't use any.
(all-unilib): New target, like old all.
(all): Use it.
(.PHONY): Add all-unilib.
From-SVN: r23045
* config/c4x/c4x.c: Convert to gen_rtx_FOO.
Added ATTRIBUTE_UNUSED to unused function arguments.
(rc_reg_operand): New predicate.
(c4x_rptb_insert): New function.
(c4x_rptb_nop_p): Recognize modified rptb_top pattern.
(c4x_optimization_options): New function.
* config/c4x/c4x.md: Convert to gen_rtx_FOO.
(decrement_and_branch_on_count): New pattern.
(rptb_top): Modified pattern to work with BCT optimization.
* config/c4x/c4x.h (RC_REG): New register class.
(rc_reg_operand): Define prototype.
(IS_RC_REG): New macro.
(IS_RC_OR_PSEUDO_REG): New macro.
(IS_RC_OR_PSEUDO_REGNO): New macro.
(OPTIMIZATION_OPTIONS): Define.
From-SVN: r23037
