The following patch improves handling of largefile support with procfs
on 32-bit Solaris. It has already been approved and installed for
binutils-gdb in the thread starting at
[PATCH] Unify Solaris procfs and largefile handling
https://sourceware.org/pipermail/gdb-patches/2020-June/169977.html
I'm syncing the config/largefile.m4 part to gcc now which is the master
for config. Since ACX_LARGEFILE isn't used anywhere in the gcc tree,
I'm installing it as obvious.
2020-09-09 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
config:
* largefile.m4: Sync from binutils-gdb.
config/ChangeLog:
PR bootstrap/96612
* ax_cxx_compile_stdcxx.m4: Add fourth argument to check also
the CXX_FOR_BUILD compiler.
ChangeLog:
PR bootstrap/96612
* configure.ac: Run AX_CXX_COMPILE_STDCXX also for ${build} compiler,
if not the same as ${host}.
* configure: Regenerate.
With --enable-cet, require CET support only for the final GCC build.
Don't enable CET without CET support for non-bootstrap build, in stage1
nor for build support.
config/
PR bootstrap/96202
* cet.m4 (GCC_CET_HOST_FLAGS): Don't enable CET without CET
support in stage1 nor for build support.
gcc/
PR bootstrap/96202
* configure: Regenerated.
libbacktrace/
PR bootstrap/96202
* configure: Regenerated.
libcc1/
PR bootstrap/96202
* configure: Regenerated.
libcpp/
PR bootstrap/96202
* configure: Regenerated.
libdecnumber/
PR bootstrap/96202
* configure: Regenerated.
libiberty/
PR bootstrap/96202
* configure: Regenerated.
lto-plugin/
PR bootstrap/96202
* configure: Regenerated.
There was general agreement last November that we would move to allowing
C++11 features to be used in GCC 11; this patch implements that direction.
ChangeLog
2020-05-18 Jason Merrill <jason@redhat.com>
* configure.ac: Update bootstrap dialect to -std=c++11.
config/ChangeLog
2020-05-18 Jason Merrill <jason@redhat.com>
* ax_cxx_compile_stdcxx.m4: Import from autoconf archive with
an adjustment to try the default mode.
gcc/ChangeLog
2020-05-18 Jason Merrill <jason@redhat.com>
* aclocal.m4: Add ax_cxx_compile_stdcxx.m4.
* configure.ac: Use AX_CXX_COMPILE_STDCXX(11).
Don't perform CET run-time check for host when cross compiling. Instead,
enable CET in cross compiler if possible so that it will run on both CET
and non-CET hosts.
config/
PR bootstrap/94998
* cet.m4 (GCC_CET_HOST_FLAGS): Enable CET in cross compiler if
possible.
libiberty/
PR bootstrap/94998
* configure: Regenerated.
lto-plugin/
PR bootstrap/94998
* configure: Regenerated.
GCC_CET_HOST_FLAGS uses -Wl,-z,ibt,-z,shstk to check if Linux/x86 host
has Intel CET enabled by introducing an Intel CET violation on purpose.
To avoid false positive, check whether -Wl,-z,ibt,-z,shstk works first.
-fcf-protection=none is added to avoid false negative when -fcf-protection
is enabled by default.
config/
PR bootstrap/94739
* cet.m4 (GCC_CET_HOST_FLAGS): Add -fcf-protection=none to
-Wl,-z,ibt,-z,shstk. Check whether -fcf-protection=none
-Wl,-z,ibt,-z,shstk works first.
libiberty/
PR bootstrap/94739
* configure: Regenerated.
lto-plugin/
PR bootstrap/94739
* configure: Regenerated.
Since ld is Intel CET enabled on Intel CET enabled host, dlopen fails on
liblto_plugin.so if it isn't Intel CET enabled. Add GCC_CET_HOST_FLAGS
to cet.m4, use it in libiberty and lto-plugin to always enable Intel
CET in liblto_plugin.so on Intel CET enabled host.
On Linux/x86 host, enable Intel CET by default if assembler and compiler
support Intel CET so that the generated liblto_plugin.so can be used on
both CET and non-CET machines. It is an error to disable Intel CET in
liblto_plugin.so on Intel CET enabled host.
config/
PR bootstrap/94739
* cet.m4 (GCC_CET_HOST_FLAGS): New.
libiberty/
PR bootstrap/94739
* Makefile.in (COMPILE.c): Add @CET_HOST_FLAGS@.
(configure_deps): Add $(srcdir)/../config/cet.m4 and
$(srcdir)/../config/enable.m4.
* aclocal.m4: Include ../config/cet.m4 and ../config/enable.m4.
* configure.ac: Add GCC_CET_HOST_FLAGS(CET_HOST_FLAGS) and
AC_SUBST(CET_HOST_FLAGS).
* configure: Regenerated.
lto-plugin/
PR bootstrap/94739
* Makefile.am (AM_CFLAGS): Add $(CET_HOST_FLAGS).
* configure.ac: Add GCC_CET_HOST_FLAGS(CET_HOST_FLAGS) and
AC_SUBST(CET_HOST_FLAGS).
* Makefile.in: Regenerated.
* aclocal.m4: Likewise.
* configure: Likewise.
The following patch provides some further math library fallbacks.
fmaf can be implemented using fma if available, fma and fmal can use
x * y + z as fallback, it is not perfect, but e.g. glibc on various arches
has been using that as fallback for many years,
and copysign/copysignl/fabs/fabsl can be implemented using corresponding
__builtin_* if we make sure that gcc expands it inline instead of using
a library call (these days it is expanded inline on most targets).
2020-04-22 Jakub Jelinek <jakub@redhat.com>
PR libfortran/94694
PR libfortran/94586
* configure.ac: Add math func checks for fmaf, fma and fmal. Add
HAVE_INLINE_BUILTIN_COPYSIGN check.
* c99_protos.h (copysign, fmaf, fma, fmal): Provide fallback
prototypes.
(HAVE_COPYSIGN, HAVE_FMAF, HAVE_FMA, HAVE_FMAL): Define if not
defined and fallback version is provided.
* intrinsics/c99_functions.c (copysign, fmaf, fma, fmal): Provide
fallback implementations if possible
* configure: Regenerated.
* config.h.in: Regenerated.
* math.m4 (GCC_CHECK_MATH_INLINE_BUILTIN_FALLBACK1,
GCC_CHECK_MATH_INLINE_BUILTIN_FALLBACK2): New.
On bare-metal targets, I/O support is typically provided by a BSP and
requires a linker script and/or hosting library to be specified on the
linker command line. Linking an empty program with the default linker
script may succeed, however, which confuses libstdc++ configuration
when programs that probe for the presence of various I/O features fail
with link errors.
2020-02-12 Sandra Loosemore <sandra@codesourcery.com>
PR libstdc++/79193
PR libstdc++/88999
config/
* no-executables.m4: Use a non-empty program to test for linker
support.
libgcc/
* configure: Regenerated.
libgfortran/
* configure: Regenerated.
libiberty/
* configure: Regenerated.
libitm/
* configure: Regenerated.
libobjc/
* configure: Regenerated.
libquadmath/
* configure: Regenerated.
libssp/
* configure: Regenerated.
libstdc++v-3/
* configure: Regenerated.
This commit:
commit e7c26e04b2 (tjteru/master)
Date: Wed Jan 22 14:54:26 2020 +0000
gcc: Add new configure options to allow static libraries to be selected
contains a couple of issues. First I failed to correctly regenerate
all of the configure files it should have done. Second, there was a
mistake in lib-link.m4, one of the conditions didn't use pure sh
syntax, I wrote this:
if x$lib_type = xauto || x$lib_type = xshared; then
When I should have written this:
if test "x$lib_type" = "xauto" || test "x$lib_type" = "xshared"; then
These issues were raised on the mailing list in these messages:
https://gcc.gnu.org/ml/gcc-patches/2020-01/msg01827.htmlhttps://gcc.gnu.org/ml/gcc-patches/2020-01/msg01921.html
config/ChangeLog:
* lib-link.m4 (AC_LIB_LINKFLAGS_BODY): Update shell syntax.
gcc/ChangeLog:
* configure: Regenerate.
intl/ChangeLog:
* configure: Regenerate.
libcpp/ChangeLog:
* configure: Regenerate.
libstdc++-v3/ChangeLog:
* configure: Regenerate.
The motivation behind this change is to make it easier for a user to
link against static libraries on a target where dynamic libraries are
the default library type (for example GNU/Linux).
Further, my motivation is really for linking libraries into GDB,
however, the binutils-gdb/config/ directory is a copy of gcc/config/
so changes for GDB need to be approved by the GCC project first.
After making this change in the gcc/config/ directory I've run
autoreconf on all of the configure scripts in the GCC tree and a
couple have been updated, so I'll use one of these to describe what my
change does.
Consider libcpp, this library links against libiconv. Currently if
the user builds on a system with both static and dynamic libiconv
installed then autotools will pick up the dynamic libiconv by
default. This is almost certainly the right thing to do.
However, if the user wants to link against static libiconv then things
are a little harder, they could remove the dynamic libiconv from their
system, but this is probably a bad idea (other things might depend on
that library), or the user can build their own version of libiconv,
install it into a unique prefix, and then configure gcc using the
--with-libiconv-prefix=DIR flag. This works fine, but is somewhat
annoying, the static library available, I just can't get autotools to
use it.
My change then adds a new flag --with-libiconv-type=TYPE, where type
is either auto, static, or shared. The default auto, ensures we keep
the existing behaviour unchanged.
If the user configures with --with-libiconv-type=static then the
configure script will ignore any dynamic libiconv it finds, and will
only look for a static libiconv, if no static libiconv is found then
the configure will continue as though there is no libiconv at all
available.
Similarly a user can specify --with-libiconv-type=shared and force the
use of shared libiconv, any static libiconv will be ignored.
As I've implemented this change within the AC_LIB_LINKFLAGS_BODY macro
then only libraries configured using the AC_LIB_LINKFLAGS or
AC_LIB_HAVE_LINKFLAGS macros will gain the new configure flag.
If this is accepted into GCC then there will be follow on patches for
binutils and GDB to regenerate some configure scripts in those
projects.
For GCC only two configure scripts needed updated after this commit,
libcpp and libstdc++-v3, both of which link against libiconv.
config/ChangeLog:
* lib-link.m4 (AC_LIB_LINKFLAGS_BODY): Add new
--with-libXXX-type=... option. Use this to guide the selection of
either a shared library or a static library.
libcpp/ChangeLog:
* configure: Regenerate.
libstdc++-v3/ChangeLog:
* configure: Regenerate.
The new arm-uclinuxfdpiceabi target behaves pretty much like
arm-linux-gnueabi. In order to enable the same set of features, we
have to update several configure scripts that generally match targets
like *-*-linux*: in most places, we add *-uclinux* where there is
already *-linux*, or uclinux* when there is already linux*.
In gcc/config.gcc and libgcc/config.host we use *-*-uclinuxfdpiceabi
because there is already a different behaviour for *-*uclinux* target.
In libtool.m4, we use uclinuxfdpiceabi in cases where ELF shared
libraries support is required, as uclinux does not guarantee that.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
config/
* futex.m4: Handle *-uclinux*.
* tls.m4 (GCC_CHECK_TLS): Likewise.
gcc/
* config.gcc: Handle *-*-uclinuxfdpiceabi.
libatomic/
* configure.tgt: Handle arm*-*-uclinux*.
* configure: Regenerate.
libgcc/
* config.host: Handle *-*-uclinuxfdpiceabi.
libitm/
* configure.tgt: Handle *-*-uclinux*.
* configure: Regenerate.
* libtool.m4: Handle uclinuxfdpiceabi.
From-SVN: r275564
Although BOOT_CFLAGS can be used to bootstrap with -Og, having a
dedicated build config is sometimes more convenient.
2019-07-08 Richard Sandiford <richard.sandiford@arm.com>
config/
* bootstrap-Og.mk: New file.
gcc/
* doc/install.texi (bootstrap-Og): Document.
From-SVN: r273193
2019-04-09 Martin Liska <mliska@suse.cz>
* Makefile.in: Regenerate.
* Makefile.tpl: Pass GENERATOR_CFLAGS
in all stages.
2019-04-09 Martin Liska <mliska@suse.cz>
* bootstrap-lto-lean.mk: New file.
2019-04-09 Martin Liska <mliska@suse.cz>
* Makefile.in: Use GENERATOR_CFLAGS for all generators.
* doc/install.texi: Document the new config.
From-SVN: r270223
This patch updates GCC to use autoconf 2.69 and automake 1.15.1.
(That's not the latest automake version, but it's the one used by
binutils-gdb, with which consistency is desirable, and in any case
seems a useful incremental update that should make a future update to
1.16.1 easier.)
The changes are generally similar to the binutils-gdb ones, and are
copied from there where shared files and directories are involved
(there are some further changes to such shared directories, however,
which I'd expect to apply to binutils-gdb once this patch is in GCC).
Largely, obsolete AC_PREREQ calls are removed, while many
AC_LANG_SOURCE calls are added to avoid warnings from aclocal and
autoconf. Multilib support is no longer included in core automake,
meaning that multilib.am needs copying from automake's contrib
directory into the GCC source tree. Autoconf 2.69 has Go support, so
local copies of that support are removed. I hope the D support will
soon be submitted to upstream autoconf so the local copy of that can
be removed in a future update. Changes to how automake generates
runtest calls mean quotes are removed from RUNTEST definitions in five
lib*/testsuite/Makefile.am files (libatomic, libgomp, libitm,
libphobos, libvtv; some others have RUNTEST definitions without
quotes, which are still OK); libgo and libphobos also get
-Wno-override added to AM_INIT_AUTOMAKE so those overrides of RUNTEST
do not generate automake warnings.
Note that the regeneration did not include regeneration of
fixincludes/config.h.in (attempting such regeneration resulted in all
the USED_FOR_TARGET conditionals disappearing; and I don't see
anything in the fixincludes/ directory that would result in such
conditionals being generated, unlike in the gcc/ directory). Also
note that libvtv/testsuite/other-tests/Makefile.in was not
regenerated; that directory is not listed as a subdirectory for which
Makefile.in gets regenerated by calling "automake" in libvtv/, so I'm
not sure how it's meant to be regenerated.
While I mostly fixed warnings should running aclocal / automake /
autoconf, there were various such warnings from automake in the
libgfortran, libgo, libgomp, liboffloadmic, libsanitizer, libphobos
directories that I did not fix, preferring to leave those to the
relevant subsystem maintainers. Specifically, most of those warnings
were of the following form (example from libgfortran):
Makefile.am:48: warning: source file 'caf/single.c' is in a subdirectory,
Makefile.am:48: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they
will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
I think it's best for the relevant maintainers to add subdir-objects
and do any other associated Makefile.am changes needed. In some cases
the paths in the warnings involved ../; I don't know if that adds any
extra complications to the use of subdir-objects.
I've tested this with native, cross and Canadian cross builds. The
risk of any OS-specific issues should I hope be rather lower than if a
libtool upgrade were included (we *should* do such an upgrade at some
point, but it's more complicated - it involves identifying all our
local libtool changes to see if any aren't included in the upstream
version we update to, and reverting an upstream libtool patch that's
inappropriate for use in GCC); I think it would be better to get this
update into GCC so that people can test in different configurations
and we can fix any issues found, rather than to try to get more and
more testing done before it goes in.
top level:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* multilib.am: New file. From automake.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
config:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* math.m4, tls.m4: Use AC_LANG_SOURCE.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
fixincludes:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* aclocal.m4, configure: Regenerate.
gcc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use single
line for second argument of AC_DEFINE_UNQUOTED.
* doc/install.texi (Tools/packages necessary for modifying GCC):
Update to autoconf 2.69 and automake 1.15.1.
* aclocal.m4, config.in, configure: Regenerate.
gnattools:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* configure: Regenerate.
gotools:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* config/go.m4: Remove file.
* Makefile.am (ACLOCAL_AMFLAGS): Do not use -I ./config.
* configure.ac: Remove AC_PREREQ. Do not include config/go.m4.
* Makefile.in, aclocal.m4, configure: Regenerate.
intl:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
libada:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* configure: Regenerate.
libatomic:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* acinclude.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libbacktrace:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libcc1:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure: Regenerate.
libcpp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* aclocal.m4, config.in, configure: Regenerate.
libdecnumber:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libffi:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove doc/libffi.info.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, fficonfig.h.in,
include/Makefile.in, man/Makefile.in, testsuite/Makefile.in:
Regenerate.
libgcc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* configure: Regenerate.
libgfortran:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libgo [logically part of this change but omitted from the commit]:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* config/go.m4: Remove file.
* config/libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use
-Wno-override in AM_INIT_AUTOMAKE call.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libgomp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove libgomp.info.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libhsail-rt:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure: Regenerate.
libiberty:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
libitm:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove libitm.info.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libobjc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* aclocal.m4, config.h.in, configure: Regenerate.
liboffloadmic:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* plugin/Makefile.am: Include multilib.am.
* plugin/configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, plugin/Makefile.in,
plugin/aclocal.m4, plugin/configure: Regenerate.
libphobos:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use -Wno-override in
AM_INIT_AUTOMAKE call.
* m4/autoconf.m4: Add extra argument to AC_LANG_DEFINE call.
* m4/druntime/os.m4: Use AC_LANG_SOURCE.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, libdruntime/Makefile.in,
src/Makefile.in, testsuite/Makefile.in: Regenerate.
libquadmath:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Remove 1.8. Add info-in-builddir.
(all-local): Define outside conditional code.
(CLEANFILES): Remove libquadmath.info.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libsanitizer:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, asan/Makefile.in, configure,
interception/Makefile.in, libbacktrace/Makefile.in,
lsan/Makefile.in, sanitizer_common/Makefile.in, tsan/Makefile.in,
ubsan/Makefile.in: Regenerate.
libssp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Remove 1.9.5.
* configure.ac: Remove AC_PREREQ. Quote argument to
AC_RUN_IFELSE.
* Makefile.in, aclocal.m4, configure: Regenerate.
libstdc++-v3:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, doc/Makefile.in,
include/Makefile.in, libsupc++/Makefile.in, po/Makefile.in,
python/Makefile.in, src/Makefile.in, src/c++11/Makefile.in,
src/c++17/Makefile.in, src/c++98/Makefile.in,
src/filesystem/Makefile.in, testsuite/Makefile.in: Regenerate.
libvtv:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
lto-plugin:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
zlib:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
From-SVN: r265695
ChangeLog:
* Makefile.def (target_modules): Add libphobos.
(flags_to_pass): Add GDC, GDCFLAGS, GDC_FOR_TARGET and
GDCFLAGS_FOR_TARGET.
(dependencies): Make libphobos depend on libatomic, libbacktrace
configure, and zlib configure.
(language): Add language d.
* Makefile.in: Rebuild.
* Makefile.tpl (BUILD_EXPORTS): Add GDC and GDCFLAGS.
(HOST_EXPORTS): Add GDC.
(POSTSTAGE1_HOST_EXPORTS): Add GDC and GDC_FOR_BUILD.
(BASE_TARGET_EXPORTS): Add GDC.
(GDC_FOR_BUILD, GDC, GDCFLAGS): New variables.
(GDC_FOR_TARGET, GDC_FLAGS_FOR_TARGET): New variables.
(EXTRA_HOST_FLAGS): Add GDC.
(STAGE1_FLAGS_TO_PASS): Add GDC.
(EXTRA_TARGET_FLAGS): Add GDC and GDCFLAGS.
* config-ml.in: Treat GDC and GDCFLAGS like other compiler/flag
environment variables.
* configure: Rebuild.
* configure.ac: Add target-libphobos to target_libraries. Set and
substitute GDC_FOR_BUILD and GDC_FOR_TARGET.
config/ChangeLog:
* multi.m4: Set GDC.
gcc/ChangeLog:
* Makefile.in (tm_d_file_list, tm_d_include_list): New variables.
(TM_D_H, D_TARGET_DEF, D_TARGET_H, D_TARGET_OBJS): New variables.
(tm_d.h, cs-tm_d.h, default-d.o): New rules.
(d/d-target-hooks-def.h, s-d-target-hooks-def-h): New rules.
(s-tm-texi): Also check timestamp on d-target.def.
(generated_files): Add TM_D_H and d-target-hooks-def.h.
(build/genhooks.o): Also depend on D_TARGET_DEF.
* config.gcc (tm_d_file, d_target_objs, target_has_targetdm): New
variables.
* config/aarch64/aarch64-d.c: New file.
* config/aarch64/aarch64-linux.h (GNU_USER_TARGET_D_CRITSEC_SIZE):
Define.
* config/aarch64/aarch64-protos.h (aarch64_d_target_versions): New
prototype.
* config/aarch64/aarch64.h (TARGET_D_CPU_VERSIONS): Define.
* config/aarch64/t-aarch64 (aarch64-d.o): New rule.
* config/arm/arm-d.c: New file.
* config/arm/arm-protos.h (arm_d_target_versions): New prototype.
* config/arm/arm.h (TARGET_D_CPU_VERSIONS): Define.
* config/arm/linux-eabi.h (EXTRA_TARGET_D_OS_VERSIONS): Define.
* config/arm/t-arm (arm-d.o): New rule.
* config/default-d.c: New file.
* config/glibc-d.c: New file.
* config/gnu.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
* config/i386/i386-d.c: New file.
* config/i386/i386-protos.h (ix86_d_target_versions): New prototype.
* config/i386/i386.h (TARGET_D_CPU_VERSIONS): Define.
* config/i386/linux-common.h (EXTRA_TARGET_D_OS_VERSIONS): Define.
(GNU_USER_TARGET_D_CRITSEC_SIZE): Define.
* config/i386/t-i386 (i386-d.o): New rule.
* config/kfreebsd-gnu.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
* config/kopensolaris-gnu.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
* config/linux-android.h (ANDROID_TARGET_D_OS_VERSIONS): Define.
* config/linux.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
* config/mips/linux-common.h (EXTRA_TARGET_D_OS_VERSIONS): Define.
* config/mips/mips-d.c: New file.
* config/mips/mips-protos.h (mips_d_target_versions): New prototype.
* config/mips/mips.h (TARGET_D_CPU_VERSIONS): Define.
* config/mips/t-mips (mips-d.o): New rule.
* config/powerpcspe/linux.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
* config/powerpcspe/linux64.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
* config/powerpcspe/powerpcspe-d.c: New file.
* config/powerpcspe/powerpcspe-protos.h (rs6000_d_target_versions):
New prototype.
* config/powerpcspe/powerpcspe.c (rs6000_output_function_epilogue):
Support GNU D by using 0 as the language type.
* config/powerpcspe/powerpcspe.h (TARGET_D_CPU_VERSIONS): Define.
* config/powerpcspe/t-powerpcspe (powerpcspe-d.o): New rule.
* config/riscv/riscv-d.c: New file.
* config/riscv/riscv-protos.h (riscv_d_target_versions): New
prototype.
* config/riscv/riscv.h (TARGET_D_CPU_VERSIONS): Define.
* config/riscv/t-riscv (riscv-d.o): New rule.
* config/rs6000/linux.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
* config/rs6000/linux64.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
* config/rs6000/rs6000-d.c: New file.
* config/rs6000/rs6000-protos.h (rs6000_d_target_versions): New
prototype.
* config/rs6000/rs6000.c (rs6000_output_function_epilogue):
Support GNU D by using 0 as the language type.
* config/rs6000/rs6000.h (TARGET_D_CPU_VERSIONS): Define.
* config/rs6000/t-rs6000 (rs6000-d.o): New rule.
* config/s390/s390-d.c: New file.
* config/s390/s390-protos.h (s390_d_target_versions): New prototype.
* config/s390/s390.h (TARGET_D_CPU_VERSIONS): Define.
* config/s390/t-s390 (s390-d.o): New rule.
* config/sparc/sparc-d.c: New file.
* config/sparc/sparc-protos.h (sparc_d_target_versions): New
prototype.
* config/sparc/sparc.h (TARGET_D_CPU_VERSIONS): Define.
* config/sparc/t-sparc (sparc-d.o): New rule.
* config/t-glibc (glibc-d.o): New rule.
* configure: Regenerated.
* configure.ac (tm_d_file): New variable.
(tm_d_file_list, tm_d_include_list, d_target_objs): Add substitutes.
* doc/contrib.texi (Contributors): Add self for the D frontend.
* doc/frontends.texi (G++ and GCC): Mention D as a supported language.
* doc/install.texi (Configuration): Mention libphobos as an option for
--enable-shared. Mention d as an option for --enable-languages.
(Testing): Mention check-d as a target.
* doc/invoke.texi (Overall Options): Mention .d, .dd, and .di as file
name suffixes. Mention d as a -x option.
* doc/sourcebuild.texi (Top Level): Mention libphobos.
* doc/standards.texi (Standards): Add section on D language.
* doc/tm.texi: Regenerated.
* doc/tm.texi.in: Add @node for D language and ABI, and @hook for
TARGET_CPU_VERSIONS, TARGET_D_OS_VERSIONS, and TARGET_D_CRITSEC_SIZE.
* dwarf2out.c (is_dlang): New function.
(gen_compile_unit_die): Use DW_LANG_D for D.
(declare_in_namespace): Return module die for D, instead of adding
extra declarations into the namespace.
(gen_namespace_die): Generate DW_TAG_module for D.
(gen_decl_die): Handle CONST_DECLSs for D.
(dwarf2out_decl): Likewise.
(prune_unused_types_walk_local_classes): Handle DW_tag_interface_type.
(prune_unused_types_walk): Handle DW_tag_interface_type same as other
kinds of aggregates.
* gcc.c (default_compilers): Add entries for .d, .dd and .di.
* genhooks.c: Include d/d-target.def.
gcc/po/ChangeLog:
* EXCLUDES: Add sources from d/dmd.
gcc/testsuite/ChangeLog:
* gcc.misc-tests/help.exp: Add D to option descriptions check.
* gdc.dg/asan/asan.exp: New file.
* gdc.dg/asan/gdc272.d: New test.
* gdc.dg/compilable.d: New test.
* gdc.dg/dg.exp: New file.
* gdc.dg/gdc254.d: New test.
* gdc.dg/gdc260.d: New test.
* gdc.dg/gdc270a.d: New test.
* gdc.dg/gdc270b.d: New test.
* gdc.dg/gdc282.d: New test.
* gdc.dg/gdc283.d: New test.
* gdc.dg/imports/gdc170.d: New test.
* gdc.dg/imports/gdc231.d: New test.
* gdc.dg/imports/gdc239.d: New test.
* gdc.dg/imports/gdc241a.d: New test.
* gdc.dg/imports/gdc241b.d: New test.
* gdc.dg/imports/gdc251a.d: New test.
* gdc.dg/imports/gdc251b.d: New test.
* gdc.dg/imports/gdc253.d: New test.
* gdc.dg/imports/gdc254a.d: New test.
* gdc.dg/imports/gdc256.d: New test.
* gdc.dg/imports/gdc27.d: New test.
* gdc.dg/imports/gdcpkg256/package.d: New test.
* gdc.dg/imports/runnable.d: New test.
* gdc.dg/link.d: New test.
* gdc.dg/lto/lto.exp: New file.
* gdc.dg/lto/ltotests_0.d: New test.
* gdc.dg/lto/ltotests_1.d: New test.
* gdc.dg/runnable.d: New test.
* gdc.dg/simd.d: New test.
* gdc.test/gdc-test.exp: New file.
* lib/gdc-dg.exp: New file.
* lib/gdc.exp: New file.
libphobos/ChangeLog:
* Makefile.am: New file.
* Makefile.in: New file.
* acinclude.m4: New file.
* aclocal.m4: New file.
* config.h.in: New file.
* configure: New file.
* configure.ac: New file.
* d_rules.am: New file.
* libdruntime/Makefile.am: New file.
* libdruntime/Makefile.in: New file.
* libdruntime/__entrypoint.di: New file.
* libdruntime/__main.di: New file.
* libdruntime/gcc/attribute.d: New file.
* libdruntime/gcc/backtrace.d: New file.
* libdruntime/gcc/builtins.d: New file.
* libdruntime/gcc/config.d.in: New file.
* libdruntime/gcc/deh.d: New file.
* libdruntime/gcc/libbacktrace.d.in: New file.
* libdruntime/gcc/unwind/arm.d: New file.
* libdruntime/gcc/unwind/arm_common.d: New file.
* libdruntime/gcc/unwind/c6x.d: New file.
* libdruntime/gcc/unwind/generic.d: New file.
* libdruntime/gcc/unwind/package.d: New file.
* libdruntime/gcc/unwind/pe.d: New file.
* m4/autoconf.m4: New file.
* m4/druntime.m4: New file.
* m4/druntime/cpu.m4: New file.
* m4/druntime/libraries.m4: New file.
* m4/druntime/os.m4: New file.
* m4/gcc_support.m4: New file.
* m4/gdc.m4: New file.
* m4/libtool.m4: New file.
* src/Makefile.am: New file.
* src/Makefile.in: New file.
* src/libgphobos.spec.in: New file.
* testsuite/Makefile.am: New file.
* testsuite/Makefile.in: New file.
* testsuite/config/default.exp: New file.
* testsuite/lib/libphobos-dg.exp: New file.
* testsuite/lib/libphobos.exp: New file.
* testsuite/testsuite_flags.in: New file.
From-SVN: r265573
* config/cet.m4 (GCC_CET_FLAGS): Default to --disable-cet, replace
--enable-cet=default with --enable-cet=auto.
* doc/install.texi: Document --disable-cet being the default and
--enable-cet=auto.
* configure: Regenerated.
From-SVN: r259487
PR jit/85384
* acx.m4 (GCC_BASE_VER): Remove \$\$ from sed expression.
* configure.ac (gcc-driver-name.h): Honor --with-gcc-major-version
by using gcc_base_ver to generate a gcc_driver_version, and use
it when generating GCC_DRIVER_NAME.
* configure: Regenerate.
* configure: Regenerate.
From-SVN: r259462
config/plugins.m4 has
if test "$plugins" = "yes"; then
AC_SEARCH_LIBS([dlopen], [dl])
fi
Plugin uses dlsym, but libasan.so only intercepts dlopen, not dlsym:
[hjl@gnu-tools-1 binutils-text]$ nm -D /lib64/libasan.so.4| grep " dl"
0000000000038580 W dlclose
U dl_iterate_phdr
000000000004dc50 W dlopen
U dlsym
U dlvsym
[hjl@gnu-tools-1 binutils-text]$
Testing dlopen for libdl leads to false negative when -fsanitize=address
is used. It results in link failure:
../bfd/.libs/libbfd.a(plugin.o): undefined reference to symbol 'dlsym@@GLIBC_2.16'
dlsym should be used to check if libdl is needed for plugin.
PR gas/22318
* plugins.m4 (AC_PLUGINS): Use dlsym to check if libdl is needed.
From-SVN: r259140
ENDBR32 and RDSSPD are multi-byte NOPs on x86-64 processors and
newer x86 processors, starting Pentium Pro. They are UD on older
32-bit processors. Detect this at configure time and adjust the
default value for enable_cet. GCC will enable CET in 32-bit run-time
libraries in any case if --enable-cet is used to configure GCC.
PR target/84148
* config/cet.m4: Check if target support multi-byte NOPS (SSE).
* libatomic/configure: Regenerate.
* libbacktrace/configure: Likewise.
* libgcc/configure: Likewise.
* libgfortran/configure: Likewise.
* libgomp/configure: Likewise.
* libitm/configure: Likewise.
* libmpx/configure: Likewise.
* libobjc/configure: Likewise.
* libquadmath/configure: Likewise.
* libsanitizer/configure: Likewise.
* libssp/configure: Likewise.
* libstdc++-v3/configure: Likewise.
* libvtv/configure: Likewise.
From-SVN: r257809
Enable building libgcc with CET options by default on Linux/x86 if
binutils supports CET v2.0. It can be disabled with --disable-cet.
It is an error to configure GCC with --enable-cet if bintuiils
doesn't support CET v2.0.
ENDBR instruction is added to __morestack_large_model since it is
called indirectly.
2017-11-17 Igor Tsimbalist <igor.v.tsimbalist@intel.com>
config/
* cet.m4: New file.
gcc/
* config.gcc (extra_headers): Add cet.h for x86 targets.
* config/i386/cet.h: New file.
* doc/install.texi: Add --enable-cet/--disable-cet.
libgcc/
* Makefile.in (configure_deps): Add $(srcdir)/../config/cet.m4.
(CET_FLAGS): New.
* config/i386/morestack.S: Include <cet.h>.
(__morestack_large_model): Add _CET_ENDBR at function entrance.
* config/i386/resms64.h: Include <cet.h>.
* config/i386/resms64f.h: Likewise.
* config/i386/resms64fx.h: Likewise.
* config/i386/resms64x.h: Likewise.
* config/i386/savms64.h: Likewise.
* config/i386/savms64f.h: Likewise.
* config/i386/t-linux (HOST_LIBGCC2_CFLAGS): Add $(CET_FLAGS).
(CRTSTUFF_T_CFLAGS): Likewise.
* configure.ac: Include ../config/cet.m4.
Set and substitute CET_FLAGS.
* configure: Regenerated.
From-SVN: r254868
Unlike bootstrap-debug, bootstrap-debug-lean used to pass compare using
the traditional compare command, because it compiled both stage2 and
stage3 with options that used to generate identical output
(-fcompare-debug= in stage2 vs -fcompare-debug in stage3).
Since we started adding relevant command-line flags to DW_AT_producer,
this is no longer the case, and stages 2 and 3 object files that differ
in nothing but the DW_AT_producer strings.
-fcompare-debug is short for -fcompare-debug=-gtoggle, so stage3
compiles twice, once with the normal options, once with toggled -g, to
then compare the temporary final dumps. When enabled, both compilations
get from the driver an additional -frandom-seed flag (if none is given
explicitly).
-fcompare-debug= is short for -fno-compare-debug, disabling the second
compilation.
The difference between the DW_AT_producer lines are the different
-fcompare-debug flags, and the presence of the -frandom-seed flag in the
stage3 compilation.
It is easy and sensible enough to filter the -fcompare-debug flags out
of the DW_AT_producer string. This option should never affect the
compilation output, it just determines whether or not to perform an
additional compilation that should produce the same executable output.
However, dropping -frandom-seed is not quite correct, in that it might
have other consequences on the compilation. So, it makes little sense
to make the effort to drop it when it's implicit; for those comparing
compiler output differences, it might even hint at what causes, and
could fix, difficult to explain differences, namely, explicitly
supplying -frandom-seed options.
They don't seem to matter for compiler bootstraps, though, at least
for now, so we can safely refrain from issuing -frandom-seed (or maybe
we already issue it where needed :-), and then, for
bootstrap-debug-lean, use the compare-debug script, that strips out
debug information before comparing the object files.
for config/ChangeLog
* bootstrap-debug-lean.mk (do-compare): Use the
contrib/compare-debug script.
for gcc/ChangeLog
* dwarf2out.c (gen_producer_string): Discard
OPT_fcompare_debug.
From-SVN: r254750
Bootstrap GCC with Intel CET by configuring GCC with
--with-build-config="bootstrap-cet bootstrap-debug"
Tested on Linux/i686 and Linux/x86-64.
config/
* bootstrap-cet.mk: New file.
gcc/
* doc/install.texi: Document bootstrap-cet.
From-SVN: r254043
PR other/79046
* configure: Regenerated.
config/
* acx.m4 (GCC_BASE_VER): New m4 function.
(ACX_TOOL_DIRS): Require GCC_BASE_VER, for
--with-gcc-major-version-only use just major number from BASE-VER.
gcc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
(CFLAGS-gcc.o): Add -DBASEVER=$(BASEVER_s).
(gcc.o): Depend on $(BASEVER).
* common.opt (dumpfullversion): New option.
* gcc.c (driver_handle_option): Handle OPT_dumpfullversion.
* doc/invoke.texi: Document -dumpfullversion.
* doc/install.texi: Document --with-gcc-major-version-only.
* configure: Regenerated.
libatomic/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libgomp/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libgcc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
* configure: Regenerated.
libssp/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
liboffloadmic/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* aclocal.m4: Include ../config/acx.m4.
* configure: Regenerated.
* Makefile.in: Regenerated.
libquadmath/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libmpx/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libada/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get
version from BASE-VER file.
* configure: Regenerated.
lto-plugin/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
libitm/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
fixincludes/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
libcilkrts/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* aclocal.m4: Include ../config/acx.m4.
* configure: Regenerated.
* Makefile.in: Regenerated.
libcc1/
* configure.ac: Add GCC_BASE_VER. For --with-gcc-major-version-only
use just major number from BASE-VER.
* configure: Regenerated.
* Makefile.in: Regenerated.
libobjc/
* configure.ac: Add GCC_BASE_VER.
* Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
libstdc++-v3/
* configure.ac: Add GCC_BASE_VER.
* fragment.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* po/Makefile.in: Regenerated.
* libsupc++/Makefile.in: Regenerated.
* testsuite/Makefile.in: Regenerated.
* src/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
* include/Makefile.in: Regenerated.
* doc/Makefile.in: Regenerated.
* python/Makefile.in: Regenerated.
* src/c++11/Makefile.in: Regenerated.
* src/c++98/Makefile.in: Regenerated.
* src/filesystem/Makefile.in: Regenerated.
libvtv/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* testsuite/Makefile.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
libsanitizer/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* libbacktrace/Makefile.in: Regenerated.
* interception/Makefile.in: Regenerated.
* asan/Makefile.in: Regenerated.
* ubsan/Makefile.in: Regenerated.
* configure: Regenerated.
* sanitizer_common/Makefile.in: Regenerated.
* lsan/Makefile.in: Regenerated.
* Makefile.in: Regenerated.
* tsan/Makefile.in: Regenerated.
libgfortran/
* configure.ac: Add GCC_BASE_VER.
* Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to
get version from BASE-VER file.
* configure: Regenerated.
* Makefile.in: Regenerated.
From-SVN: r244521
Also fix a stray changelog entry. Some of the regen here is due to
previous changes not being regenerated properly, in part due to the
missing configure dependencies.
* configure: Regenerate.
config/
* picflag.m4: Remove stray \xA0 in comment.
gcc/
* Makefile.in (aclocal_deps): Update and order as per aclocal.m4.
* configure: Regenerate.
* config.in: Regenerate.
libada/
* Makefile.in (configure_deps): Update and order as per
configure.ac sinclude.
* configure: Regenerate.
libgcc/
* Makefile.in (configure_deps): Update.
* configure: Regenerate.
libiberty/
* Makefile.in (configure_deps): Update.
* configure: Regenerate.
libitm/
* Makefile.in: Regenerate.
* testsuite/Makefile.in: Regenerate.
From-SVN: r244049
<toplevel>
* configure.ac: Don't use pkg-config to check for bdw-gc.
* configure: Regenerate.
config/
* pkg.m4: Remove.
libobjc/
* configure.ac: Don't use pkg-config to check for bdw-gc.
* configure: Regenerate.
gcc/
* doc/install.texi: Don't use pkg-config to check for bdw-gc.
From-SVN: r243108
The patch disables all fuse-*.c tests when configuring gcc with isl 0.14 or earlier.
ChangeLog:
* Makefile.in: Regenerate.
* Makefile.tpl: Export ISLVER.
* configure: Regenerate.
* config/isl.m4: Detect isl-0.15.
gcc/
* Makefile.in: Set ISLVER in site.exp.
gcc/testsuite/
* gcc.dg/graphite/graphite.exp: Only run the fuse-*.c tests with isl-0.15.
Co-Authored-By: Sebastian Pop <s.pop@samsung.com>
From-SVN: r232811
we check for a the isl compute timeout function added in isl 0.13.
That means GCC could still be configured with isl 0.13, 0.14, and 0.15.
* config/isl.m4 (ISL_CHECK_VERSION): Check for
isl_ctx_get_max_operations.
* configure: Regenerate.
gcc/
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac: Remove checks for functions that exist in isl 0.13 or
later.
* graphite-isl-ast-to-gimple.c: Remove #ifdefs and code for isl 0.12.
* graphite-optimize-isl.c: Same.
* graphite-poly.c: Same.
* graphite-sese-to-poly.c: Same.
* graphite.h: Add comment for isl 0.14.
* toplev.c (print_version): Print isl version.
Co-Authored-By: Sebastian Pop <s.pop@samsung.com>
From-SVN: r231706
gcc/
* asan.c (asan_emit_stack_protection): Don't pass local stack to
asan_stack_malloc_[n] anymore. Check if asan_stack_malloc_[n] returned
NULL and use local stack than.
(asan_finish_file): Insert __asan_version_mismatch_check_v[n] call
in addition to __asan_init.
* sanitizer.def (BUILT_IN_ASAN_INIT): Rename to __asan_init.
(BUILT_IN_ASAN_VERSION_MISMATCH_CHECK): Add new builtin call.
* asan.h (asan_intercepted_p): Handle new string builtins.
* ubsan.c (ubsan_use_new_style_p): New function.
(ubsan_instrument_float_cast): If location is unknown, assign
input_location to loc. Propagate loc to ubsan_create_data if
ubsan_use_new_style_p returned true.
config/
* bootstrap-asan.mk: Replace ASAN_OPTIONS=detect_leaks with
LSAN_OPTIONS=detect_leaks.
gcc/testsuite/
* c-c++-common/ubsan/float-cast-overflow-10.c: Adjust test.
* c-c++-common/ubsan/float-cast-overflow-8.c: Likewise.
* c-c++-common/ubsan/float-cast-overflow-9.c: Likewise.
* g++.dg/asan/default-options-1.C: Likewise.
From-SVN: r229112
(The previous iconv-related commit missed the config/iconv.m4 change.)
Original description:
This is the second in a series of patches to make a build with an
in-tree GNU libiconv work as designed.
Currently GDB is the only toolchain component which actually uses an
in-tree libiconv. This patch modifies the common AM_ICONV to use an
in-tree libiconv when present and not already provided by libc.
(GDB's workaround uses an in-tree libiconv even when libc provides
iconv(3); I'm not sure when or why that would be desirable.)
config/ChangeLog:
2015-08-24 Yaakov Selkowitz <yselkowi@redhat.com>
* iconv.m4 (AM_ICONV_LINK): Use in-tree libiconv when present.
---
config/ChangeLog | 4 +++
config/iconv.m4 | 47 +++++++++++++++++++++------
4 files changed, 112 insertions(+), 36 deletions(-)
diff --git a/config/iconv.m4 b/config/iconv.m4
index c5f3579..5f9304a 100644
--- a/config/iconv.m4
+++ b/config/iconv.m4
@@ -7,6 +7,7 @@ dnl that contains a configuration script generated by Autoconf, under
dnl the same distribution terms as the rest of that program.
dnl From Bruno Haible.
+dnl with modifications to support building with in-tree libiconv
AC_DEFUN([AM_ICONV_LINKFLAGS_BODY],
[
@@ -28,24 +29,51 @@ AC_DEFUN([AM_ICONV_LINK],
dnl accordingly.
AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
- dnl Add $INCICONV to CPPFLAGS before performing the following checks,
- dnl because if the user has installed libiconv and not disabled its use
- dnl via --without-libiconv-prefix, he wants to use it. The first
- dnl AC_TRY_LINK will then fail, the second AC_TRY_LINK will succeed.
- am_save_CPPFLAGS="$CPPFLAGS"
- AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV])
-
AC_CACHE_CHECK(for iconv, am_cv_func_iconv, [
am_cv_func_iconv="no, consider installing GNU libiconv"
am_cv_lib_iconv=no
+ dnl Add $INCICONV to CPPFLAGS before performing the first check,
+ dnl because if the user has installed libiconv and not disabled its use
+ dnl via --without-libiconv-prefix, he wants to use it. This first
+ dnl AC_TRY_LINK will then fail, the second AC_TRY_LINK will succeed.
+ am_save_CPPFLAGS="$CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS $INCICONV"
AC_TRY_LINK([#include <stdlib.h>
#include <iconv.h>],
[iconv_t cd = iconv_open("","");
iconv(cd,NULL,NULL,NULL,NULL);
iconv_close(cd);],
am_cv_func_iconv=yes)
+ CPPFLAGS="$am_save_CPPFLAGS"
+
+ if test "$am_cv_func_iconv" != yes && test -d ../libiconv; then
+ for _libs in .libs _libs; do
+ am_save_CPPFLAGS="$CPPFLAGS"
+ am_save_LIBS="$LIBS"
+ CPPFLAGS="$CPPFLAGS -I../libiconv/include"
+ LIBS="$LIBS ../libiconv/lib/$_libs/libiconv.a"
+ AC_TRY_LINK([#include <stdlib.h>
+#include <iconv.h>],
+ [iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);],
+ INCICONV="-I../libiconv/include"
+ LIBICONV='${top_builddir}'/../libiconv/lib/$_libs/libiconv.a
+ LTLIBICONV='${top_builddir}'/../libiconv/lib/libiconv.la
+ am_cv_lib_iconv=yes
+ am_cv_func_iconv=yes)
+ CPPFLAGS="$am_save_CPPFLAGS"
+ LIBS="$am_save_LIBS"
+ if test "$am_cv_func_iconv" = "yes"; then
+ break
+ fi
+ done
+ fi
+
if test "$am_cv_func_iconv" != yes; then
+ am_save_CPPFLAGS="$CPPFLAGS"
am_save_LIBS="$LIBS"
+ CPPFLAGS="$LIBS $INCICONV"
LIBS="$LIBS $LIBICONV"
AC_TRY_LINK([#include <stdlib.h>
#include <iconv.h>],
@@ -54,6 +82,7 @@ AC_DEFUN([AM_ICONV_LINK],
iconv_close(cd);],
am_cv_lib_iconv=yes
am_cv_func_iconv=yes)
+ CPPFLAGS="$am_save_CPPFLAGS"
LIBS="$am_save_LIBS"
fi
])
@@ -61,12 +90,10 @@ AC_DEFUN([AM_ICONV_LINK],
AC_DEFINE(HAVE_ICONV, 1, [Define if you have the iconv() function.])
fi
if test "$am_cv_lib_iconv" = yes; then
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV])
AC_MSG_CHECKING([how to link with libiconv])
AC_MSG_RESULT([$LIBICONV])
else
- dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV
- dnl either.
- CPPFLAGS="$am_save_CPPFLAGS"
LIBICONV=
LTLIBICONV=
fi
--
1.9.3
From-SVN: r227118
Patch in the bottom adds support of IA MCU psABI to libgcc (enables
soft-fp) and libdecnumber (enables it for IA MCU).
config/
* dfp.m4 (enable_decimal_float): Also set to yes for
i?86*-*-elfiamcu target.
gcc/
* configure: Regenerated.
libdecnumber/
* configure: Regenerated.
libgcc/
* config.host: Support i[34567]86-*-elfiamcu target.
* config/t-softfp-sfdftf: New file.
* config/i386/32/t-iamcu: Likewise.
* configure: Regenerated.
From-SVN: r225198
Using a named bitfield with a width more than 0 means we won't hit
weirdness caused by the bitfield not really needing to exist. Changing
int to long long means we won't have trouble with some arch where size
of int is 1 or 2.
libobjc/ChangeLog:
2015-05-04 Trevor Saunders <tbsaunde+gcc@tbsaunde.org>
* configure: Regenerate.
config/ChangeLog:
2015-05-04 Trevor Saunders <tbsaunde+gcc@tbsaunde.org>
* bitfields.m4: Change int to long long, and use bitfields of
width 1 instead of 0.
From-SVN: r222794
PR target/65351
config/
* mh-darwin: Only apply -mdynamic-no-pic for m32 Darwin when the compiler in
use supports -mno-dynamic-no-pic.
* picflag.m4: Only append -mno-dynamic-no-pic for Darwin when -mdynamic-no-pic
is present in CFLAGS.
libiberty/
* configure: Regenerate.
libada/
* configure: Regenerate.
libgcc/
* configure: Regenerate.
gcc/
* configure: Regenerate.
Co-Authored-By: Iain Sandoe <iain@codesourcery.com>
From-SVN: r221967
config/ChangeLog:
PR bootstrap/65537
* bootstrap-lto-noplugin.mk: New build configuration.
gcc/ChangeLog:
PR bootstrap/65537
* doc/install.texi (Building a native compiler): Document new
bootstrap-lto-noplugin configuration. Mention that bootstrap-lto
configuration assumes that the host supports the linker plugin.
From-SVN: r221667
This pulls in the missing Binutils pieces into the ./config
directory. Contains these missing Binutils changes:
2014-08-14 Alan Modra <amodra@gmail.com>
* plugins.m4: Test for dlfcn.h or windows.h here to set default
for --enable-plugins. Report error if someone tries to enable
plugins on a host we don't support.
2014-08-19 Alan Modra <amodra@gmail.com>
* plugins.m4 (AC_PLUGINS): If plugins are enabled, add -ldl to
LIBS via AC_SEARCH_LIBS.
For this commit:
2014-11-26 Jan-Benedict Glaw <jbglaw@lug-owl.de>
* config/plugins.m4: Merge from Binutils.
From-SVN: r218102
2014-10-27 Phil Muldoon <pmuldoon@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Tom Tromey <tromey@redhat.com>
* aclocal.m4: New file.
* callbacks.cc: New file.
* callbacks.hh: New file.
* cc1plugin-config.h.in: New file.
* configure: New file.
* configure.ac: New file.
* connection.cc: New file.
* connection.hh: New file.
* findcomp.cc: New file.
* findcomp.hh: New file.
* libcc1.cc: New file.
* libcc1plugin.sym: New file.
* libcc1.sym: New file.
* Makefile.am: New file.
* Makefile.in: New file.
* marshall.cc: New file.
* marshall.hh: New file.
* names.cc: New file.
* names.hh: New file.
* plugin.cc: New file.
* rpc.hh: New file.
* status.hh: New file.
2014-10-27 Phil Muldoon <pmuldoon@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Tom Tromey <tromey@redhat.com>
* gcc-c-fe.def: New file.
* gcc-c-interface.h: New file.
* gcc-interface.h: New file.
2014-10-27 Phil Muldoon <pmuldoon@redhat.com>
Tom Tromey <tromey@redhat.com>
* c-tree.h (enum c_oracle_request): New.
(c_binding_oracle_function): New typedef.
(c_binding_oracle, c_pushtag, c_bind): Declare.
* c-decl.c (c_binding_oracle): New global.
(I_SYMBOL_CHECKED): New macro.
(i_symbol_binding): New function.
(I_SYMBOL_BINDING, I_SYMBOL_DECL): Redefine.
(I_TAG_CHECKED): New macro.
(i_tag_binding): New function.
(I_TAG_BINDING, I_TAG_DECL): Redefine.
(I_LABEL_CHECKED): New macro.
(i_label_binding): New function.
(I_LABEL_BINDING, I_LABEL_DECL): Redefine.
(c_print_identifier): Save and restore c_binding_oracle.
(c_pushtag, c_bind): New functions.
2014-10-27 Phil Muldoon <pmuldoon@redhat.com>
Tom Tromey <tromey@redhat.com>
* aclocal.m4, configure: Rebuild.
* Makefile.in (aclocal_deps): Add gcc-plugin.m4.
* configure.ac: Use GCC_ENABLE_PLUGINS.
* stor-layout.c (finish_bitfield_layout): Now public. Change
argument type to 'tree'.
(finish_record_layout): Update.
* stor-layout.h (finish_bitfield_layout): Declare.
2014-10-27 Tom Tromey <tromey@redhat.com>
* gcc-plugin.m4: New file.
2014-10-27 Phil Muldoon <pmuldoon@redhat.com>
Tom Tromey <tromey@redhat.com>
* Makefile.def: Add libcc1 to host_modules.
* configure.ac (host_tools): Add libcc1.
* Makefile.in, configure: Rebuild.
From-SVN: r216748
