mirror of
git://gcc.gnu.org/git/gcc.git
synced 2025-04-08 20:52:05 +08:00
[PATCH, GCC/ARM, 6/10] Clear GPRs inline when calling nscall function
Besides changing the set of registers that needs to be cleared inline, this patch also generates the push and pop to save and restore callee-saved registers without trusting the callee inline. To make the code more future-proof, this (currently) Armv8.1-M specific behavior is expressed in terms of clearing of callee-saved registers rather than directly based on the targets. The patch contains 1 subtlety: Debug information is disabled for push and pop because the REG_CFA_RESTORE notes used to describe popping of registers do not stack. Instead, they just reset the debug state for the register to the one at the beginning of the function, which is incorrect for a register that is pushed twice (in prologue and before nonsecure call) and then popped for the first time. In particular, this occasionally trips CFI note creation code when there are two codepaths to the epilogue, one of which does not go through the nonsecure call. Obviously this mean that debugging between the push and pop is not reliable. *** gcc/ChangeLog *** 2020-01-16 Mihail-Calin Ionescu <mihail.ionescu@arm.com> 2020-01-16 Thomas Preud'homme <thomas.preudhomme@arm.com> * config/arm/arm.c (arm_emit_multi_reg_pop): Declare early. (cmse_nonsecure_call_clear_caller_saved): Rename into ... (cmse_nonsecure_call_inline_register_clear): This. Save and clear callee-saved GPRs as well as clear ip register before doing a nonsecure call then restore callee-saved GPRs after it when targeting Armv8.1-M Mainline. (arm_reorg): Adapt to function rename. *** gcc/testsuite/ChangeLog *** 2020-01-16 Mihail-Calin Ionescu <mihail.ionescu@arm.com> 2020-01-16 Thomas Preud'homme <thomas.preudhomme@arm.com> * gcc.target/arm/cmse/cmse-1.c: Add check for PUSH and POP and update CLRM check. * gcc.target/arm/cmse/cmse-14.c: Likewise. * gcc.target/arm/cmse/mainline/8_1m/bitfield-4.c: Likewise. * gcc.target/arm/cmse/mainline/8_1m/bitfield-5.c: Likewise. * gcc.target/arm/cmse/mainline/8_1m/bitfield-6.c: Likewise. * gcc.target/arm/cmse/mainline/8_1m/bitfield-7.c: Likewise. * gcc.target/arm/cmse/mainline/8_1m/bitfield-8.c: Likewise. * gcc.target/arm/cmse/mainline/8_1m/bitfield-9.c: Likewise. * gcc.target/arm/cmse/mainline/8_1m/bitfield-and-union.c: Likewise. * gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-13.c: Likewise. * gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-7.c: Likewise. * gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-8.c: Likewise. * gcc.target/arm/cmse/mainline/8_1m/hard/cmse-13.c: Likewise. * gcc.target/arm/cmse/mainline/8_1m/hard/cmse-7.c: Likewise. * gcc.target/arm/cmse/mainline/8_1m/hard/cmse-8.c: Likewise. * gcc.target/arm/cmse/mainline/8_1m/soft/cmse-13.c: Likewise. * gcc.target/arm/cmse/mainline/8_1m/soft/cmse-7.c: Likewise. * gcc.target/arm/cmse/mainline/8_1m/soft/cmse-8.c: Likewise. * gcc.target/arm/cmse/mainline/8_1m/soft-sp/cmse-7.c: Likewise. * gcc.target/arm/cmse/mainline/8_1m/soft-sp/cmse-8.c: Likewise. * gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-13.c: Likewise. * gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-7.c: Likewise. * gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-8.c: Likewise. * gcc.target/arm/cmse/mainline/8_1m/softfp/union-1.c: Likewise. * gcc.target/arm/cmse/mainline/8_1m/softfp/union-2.c: Likewise.
This commit is contained in:
Mihail Ionescu
parent
0b1c7b27a7
commit
2d924ca620
@ -1,6 +1,17 @@
|
||||
2020-01-16 Mihail-Calin Ionescu <mihail.ionescu@arm.com>
|
||||
2020-01-16 Thomas Preud'homme <thomas.preudhomme@arm.com>
|
||||
|
||||
* config/arm/arm.c (arm_emit_multi_reg_pop): Declare early.
|
||||
(cmse_nonsecure_call_clear_caller_saved): Rename into ...
|
||||
(cmse_nonsecure_call_inline_register_clear): This. Save and clear
|
||||
callee-saved GPRs as well as clear ip register before doing a nonsecure
|
||||
call then restore callee-saved GPRs after it when targeting
|
||||
Armv8.1-M Mainline.
|
||||
(arm_reorg): Adapt to function rename.
|
||||
|
||||
2020-01-16 Mihail-Calin Ionescu <mihail.ionescu@arm.com>
|
||||
2020-01-16 Thomas Preud'homme <thomas.preudhomme@arm.com>
|
||||
|
||||
* config/arm/arm-protos.h (clear_operation_p): Adapt prototype.
|
||||
* config/arm/arm.c (clear_operation_p): Extend to be able to check a
|
||||
clear_vfp_multiple pattern based on a new vfp parameter.
|
||||
|
||||
@ -187,6 +187,7 @@ static int arm_memory_move_cost (machine_mode, reg_class_t, bool);
|
||||
static void emit_constant_insn (rtx cond, rtx pattern);
|
||||
static rtx_insn *emit_set_insn (rtx, rtx);
|
||||
static rtx emit_multi_reg_push (unsigned long, unsigned long);
|
||||
static void arm_emit_multi_reg_pop (unsigned long);
|
||||
static int arm_arg_partial_bytes (cumulative_args_t,
|
||||
const function_arg_info &);
|
||||
static rtx arm_function_arg (cumulative_args_t, const function_arg_info &);
|
||||
@ -18263,13 +18264,13 @@ cmse_clear_registers (sbitmap to_clear_bitmap, uint32_t *padding_bits_to_clear,
|
||||
}
|
||||
}
|
||||
|
||||
/* Clears caller saved registers not used to pass arguments before a
|
||||
cmse_nonsecure_call. Saving, clearing and restoring of callee saved
|
||||
registers is done in __gnu_cmse_nonsecure_call libcall.
|
||||
See libgcc/config/arm/cmse_nonsecure_call.S. */
|
||||
/* Clear core and caller-saved VFP registers not used to pass arguments before
|
||||
a cmse_nonsecure_call. Saving, clearing and restoring of VFP callee-saved
|
||||
registers is done in the __gnu_cmse_nonsecure_call libcall. See
|
||||
libgcc/config/arm/cmse_nonsecure_call.S. */
|
||||
|
||||
static void
|
||||
cmse_nonsecure_call_clear_caller_saved (void)
|
||||
cmse_nonsecure_call_inline_register_clear (void)
|
||||
{
|
||||
basic_block bb;
|
||||
|
||||
@ -18279,8 +18280,15 @@ cmse_nonsecure_call_clear_caller_saved (void)
|
||||
|
||||
FOR_BB_INSNS (bb, insn)
|
||||
{
|
||||
unsigned address_regnum, regno, maxregno =
|
||||
TARGET_HARD_FLOAT_ABI ? D7_VFP_REGNUM : NUM_ARG_REGS - 1;
|
||||
bool clear_callee_saved = TARGET_HAVE_FPCXT_CMSE;
|
||||
unsigned long callee_saved_mask
|
||||
= ((1 << (LAST_HI_REGNUM + 1)) - 1)
|
||||
& ~((1 << (LAST_ARG_REGNUM + 1)) - 1);
|
||||
unsigned address_regnum, regno;
|
||||
unsigned max_int_regno
|
||||
= clear_callee_saved ? IP_REGNUM : LAST_ARG_REGNUM;
|
||||
unsigned maxregno
|
||||
= TARGET_HARD_FLOAT_ABI ? D7_VFP_REGNUM : max_int_regno;
|
||||
auto_sbitmap to_clear_bitmap (maxregno + 1);
|
||||
rtx_insn *seq;
|
||||
rtx pat, call, unspec, clearing_reg, ip_reg, shift;
|
||||
@ -18312,9 +18320,11 @@ cmse_nonsecure_call_clear_caller_saved (void)
|
||||
|| XINT (unspec, 1) != UNSPEC_NONSECURE_MEM)
|
||||
continue;
|
||||
|
||||
/* Determine the caller-saved registers we need to clear. */
|
||||
/* Mark registers that needs to be cleared. Those that holds a
|
||||
parameter are removed from the set further below. */
|
||||
bitmap_clear (to_clear_bitmap);
|
||||
bitmap_set_range (to_clear_bitmap, R0_REGNUM, NUM_ARG_REGS);
|
||||
bitmap_set_range (to_clear_bitmap, R0_REGNUM,
|
||||
max_int_regno - R0_REGNUM + 1);
|
||||
|
||||
/* Only look at the caller-saved floating point registers in case of
|
||||
-mfloat-abi=hard. For -mfloat-abi=softfp we will be using the
|
||||
@ -18336,7 +18346,7 @@ cmse_nonsecure_call_clear_caller_saved (void)
|
||||
gcc_assert (MEM_P (address));
|
||||
gcc_assert (REG_P (XEXP (address, 0)));
|
||||
address_regnum = REGNO (XEXP (address, 0));
|
||||
if (address_regnum < R0_REGNUM + NUM_ARG_REGS)
|
||||
if (address_regnum <= max_int_regno)
|
||||
bitmap_clear_bit (to_clear_bitmap, address_regnum);
|
||||
|
||||
/* Set basic block of call insn so that df rescan is performed on
|
||||
@ -18396,6 +18406,15 @@ cmse_nonsecure_call_clear_caller_saved (void)
|
||||
shift = gen_rtx_ASHIFT (SImode, clearing_reg, const1_rtx);
|
||||
emit_insn (gen_rtx_SET (clearing_reg, shift));
|
||||
|
||||
if (clear_callee_saved)
|
||||
{
|
||||
rtx push_insn =
|
||||
emit_multi_reg_push (callee_saved_mask, callee_saved_mask);
|
||||
/* Disable frame debug info in push because it needs to be
|
||||
disabled for pop (see below). */
|
||||
RTX_FRAME_RELATED_P (push_insn) = 0;
|
||||
}
|
||||
|
||||
/* Clear caller-saved registers that leak before doing a non-secure
|
||||
call. */
|
||||
ip_reg = gen_rtx_REG (SImode, IP_REGNUM);
|
||||
@ -18405,6 +18424,36 @@ cmse_nonsecure_call_clear_caller_saved (void)
|
||||
seq = get_insns ();
|
||||
end_sequence ();
|
||||
emit_insn_before (seq, insn);
|
||||
|
||||
if (TARGET_HAVE_FPCXT_CMSE)
|
||||
{
|
||||
rtx_insn *next, *pop_insn, *after = insn;
|
||||
|
||||
start_sequence ();
|
||||
arm_emit_multi_reg_pop (callee_saved_mask);
|
||||
pop_insn = get_last_insn ();
|
||||
|
||||
/* Disable frame debug info in pop because they reset the state
|
||||
of popped registers to what it was at the beginning of the
|
||||
function, before the prologue. This leads to incorrect state
|
||||
when doing the pop after the nonsecure call for registers that
|
||||
are pushed both in prologue and before the nonsecure call.
|
||||
|
||||
It also occasionally triggers an assert failure in CFI note
|
||||
creation code when there are two codepaths to the epilogue,
|
||||
one of which does not go through the nonsecure call.
|
||||
Obviously this mean that debugging between the push and pop is
|
||||
not reliable. */
|
||||
RTX_FRAME_RELATED_P (pop_insn) = 0;
|
||||
|
||||
end_sequence ();
|
||||
|
||||
emit_insn_after (pop_insn, after);
|
||||
|
||||
/* Skip pop we have just inserted after nonsecure call, we know
|
||||
it does not contain a nonsecure call. */
|
||||
insn = pop_insn;
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
@ -18710,7 +18759,7 @@ arm_reorg (void)
|
||||
Mfix * fix;
|
||||
|
||||
if (use_cmse)
|
||||
cmse_nonsecure_call_clear_caller_saved ();
|
||||
cmse_nonsecure_call_inline_register_clear ();
|
||||
|
||||
/* We cannot run the Thumb passes for thunks because there is no CFG. */
|
||||
if (cfun->is_thunk)
|
||||
|
||||
@ -1,6 +1,36 @@
|
||||
2020-01-16 Mihail-Calin Ionescu <mihail.ionescu@arm.com>
|
||||
2020-01-16 Thomas Preud'homme <thomas.preudhomme@arm.com>
|
||||
|
||||
* gcc.target/arm/cmse/cmse-1.c: Add check for PUSH and POP and update
|
||||
CLRM check.
|
||||
* gcc.target/arm/cmse/cmse-14.c: Likewise.
|
||||
* gcc.target/arm/cmse/mainline/8_1m/bitfield-4.c: Likewise.
|
||||
* gcc.target/arm/cmse/mainline/8_1m/bitfield-5.c: Likewise.
|
||||
* gcc.target/arm/cmse/mainline/8_1m/bitfield-6.c: Likewise.
|
||||
* gcc.target/arm/cmse/mainline/8_1m/bitfield-7.c: Likewise.
|
||||
* gcc.target/arm/cmse/mainline/8_1m/bitfield-8.c: Likewise.
|
||||
* gcc.target/arm/cmse/mainline/8_1m/bitfield-9.c: Likewise.
|
||||
* gcc.target/arm/cmse/mainline/8_1m/bitfield-and-union.c: Likewise.
|
||||
* gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-13.c: Likewise.
|
||||
* gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-7.c: Likewise.
|
||||
* gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-8.c: Likewise.
|
||||
* gcc.target/arm/cmse/mainline/8_1m/hard/cmse-13.c: Likewise.
|
||||
* gcc.target/arm/cmse/mainline/8_1m/hard/cmse-7.c: Likewise.
|
||||
* gcc.target/arm/cmse/mainline/8_1m/hard/cmse-8.c: Likewise.
|
||||
* gcc.target/arm/cmse/mainline/8_1m/soft/cmse-13.c: Likewise.
|
||||
* gcc.target/arm/cmse/mainline/8_1m/soft/cmse-7.c: Likewise.
|
||||
* gcc.target/arm/cmse/mainline/8_1m/soft/cmse-8.c: Likewise.
|
||||
* gcc.target/arm/cmse/mainline/8_1m/soft-sp/cmse-7.c: Likewise.
|
||||
* gcc.target/arm/cmse/mainline/8_1m/soft-sp/cmse-8.c: Likewise.
|
||||
* gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-13.c: Likewise.
|
||||
* gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-7.c: Likewise.
|
||||
* gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-8.c: Likewise.
|
||||
* gcc.target/arm/cmse/mainline/8_1m/softfp/union-1.c: Likewise.
|
||||
* gcc.target/arm/cmse/mainline/8_1m/softfp/union-2.c: Likewise.
|
||||
|
||||
2020-01-16 Mihail-Calin Ionescu <mihail.ionescu@arm.com>
|
||||
2020-01-16 Thomas Preud'homme <thomas.preudhomme@arm.com>
|
||||
|
||||
* gcc.target/arm/cmse/bitfield-1.c: Add check for VSCCLRM.
|
||||
* gcc.target/arm/cmse/bitfield-2.c: Likewise.
|
||||
* gcc.target/arm/cmse/bitfield-3.c: Likewise.
|
||||
|
||||
@ -109,7 +109,9 @@ qux (int_nsfunc_t * callback)
|
||||
/* { dg-final { scan-assembler "clrm\t\{r1, r2, r3, ip, APSR\}" { target arm_cmse_clear_ok } } } */
|
||||
/* { dg-final { scan-assembler "vldr\tFPCXTNS, \\\[sp\\\], #4" { target arm_cmse_clear_ok } } } */
|
||||
/* { dg-final { scan-assembler "msr\tAPSR_nzcvq" { target { ! arm_cmse_clear_ok } } } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r0, r1, r2, r3, APSR\}" { target arm_cmse_clear_ok } } } */
|
||||
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" { target arm_cmse_clear_ok } } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r0, r1, r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" { target arm_cmse_clear_ok } } } */
|
||||
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" { target arm_cmse_clear_ok } } } */
|
||||
|
||||
int call_callback (void)
|
||||
{
|
||||
|
||||
@ -9,6 +9,8 @@ int foo (void)
|
||||
return bar ();
|
||||
}
|
||||
|
||||
/* { dg-final { scan-assembler "clrm\t\{r0, r1, r2, r3, APSR\}" { target arm_cmse_clear_ok } } } */
|
||||
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" { target arm_cmse_clear_ok } } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r0, r1, r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" { target arm_cmse_clear_ok } } } */
|
||||
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" { target arm_cmse_clear_ok } } } */
|
||||
/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
|
||||
/* { dg-final { scan-assembler-not "^(.*\\s)?bl?\[^\\s]*\\s+bar" } } */
|
||||
|
||||
@ -12,5 +12,7 @@
|
||||
/* { dg-final { scan-assembler "and\tr2, r2, ip" } } */
|
||||
/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r3, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
|
||||
|
||||
@ -10,5 +10,7 @@
|
||||
/* { dg-final { scan-assembler "and\tr1, r1, ip" } } */
|
||||
/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r2, r3, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
|
||||
|
||||
@ -13,5 +13,7 @@
|
||||
/* { dg-final { scan-assembler "and\tr2, r2, ip" } } */
|
||||
/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r3, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
|
||||
|
||||
@ -10,5 +10,7 @@
|
||||
/* { dg-final { scan-assembler "and\tr1, r1, ip" } } */
|
||||
/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r2, r3, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
|
||||
|
||||
@ -13,5 +13,7 @@
|
||||
/* { dg-final { scan-assembler "and\tr2, r2, ip" } } */
|
||||
/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r3, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
|
||||
|
||||
@ -7,5 +7,7 @@
|
||||
/* { dg-final { scan-assembler "and\tr0, r0, ip" } } */
|
||||
/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r1, r2, r3, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r1, r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
|
||||
|
||||
@ -17,4 +17,7 @@
|
||||
/* { dg-final { scan-assembler "and\tr3, r3, ip" } } */
|
||||
/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
|
||||
|
||||
@ -8,12 +8,14 @@
|
||||
/* Checks for saving and clearing prior to function call. */
|
||||
/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r0, r1, r2, r3, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r0, r1, r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler-not "vmov\.f32\ts0, #1\.0" } } */
|
||||
/* { dg-final { scan-assembler-not "vmov\.f32\ts2, #1\.0" } } */
|
||||
/* { dg-final { scan-assembler-not "vmov\.f32\ts3, #1\.0" } } */
|
||||
/* { dg-final { scan-assembler "vscclrm\t\{s1, VPR\}" } } */
|
||||
/* { dg-final { scan-assembler "vscclrm\t\{s4-s15, VPR\}" } } */
|
||||
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
|
||||
/* Now we check that we use the correct intrinsic to call. */
|
||||
/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
|
||||
|
||||
@ -8,8 +8,10 @@
|
||||
/* Checks for saving and clearing prior to function call. */
|
||||
/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r0, r1, r2, r3, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r0, r1, r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "vscclrm\t\{s0-s15, VPR\}" } } */
|
||||
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
|
||||
/* Now we check that we use the correct intrinsic to call. */
|
||||
/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
|
||||
|
||||
@ -8,10 +8,12 @@
|
||||
/* Checks for saving and clearing prior to function call. */
|
||||
/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r0, r1, r2, r3, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r0, r1, r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler-not "vmov\.f32\ts0, #1\.0" } } */
|
||||
/* { dg-final { scan-assembler-not "vmov\.f32\ts1, #1\.0" } } */
|
||||
/* { dg-final { scan-assembler "vscclrm\t\{s2-s15, VPR\}" } } */
|
||||
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
|
||||
/* Now we check that we use the correct intrinsic to call. */
|
||||
/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
|
||||
|
||||
@ -8,7 +8,8 @@
|
||||
/* Checks for saving and clearing prior to function call. */
|
||||
/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r0, r1, r2, r3, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r0, r1, r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler-not "vmov\.f32\ts0, #1\.0" } } */
|
||||
/* { dg-final { scan-assembler-not "vmov\.f64\td0, #1\.0" } } */
|
||||
/* { dg-final { scan-assembler-not "vmov\.f64\td1, #1\.0" } } */
|
||||
@ -16,6 +17,7 @@
|
||||
/* { dg-final { scan-assembler-not "vmov\.f32\ts3, #1\.0" } } */
|
||||
/* { dg-final { scan-assembler "vscclrm\t\{s1, VPR\}" } } */
|
||||
/* { dg-final { scan-assembler "vscclrm\t\{s4-s15, VPR\}" } } */
|
||||
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
|
||||
/* Now we check that we use the correct intrinsic to call. */
|
||||
/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
|
||||
|
||||
@ -8,8 +8,10 @@
|
||||
/* Checks for saving and clearing prior to function call. */
|
||||
/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r0, r1, r2, r3, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r0, r1, r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "vscclrm\t\{s0-s15, VPR\}" } } */
|
||||
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
|
||||
/* Now we check that we use the correct intrinsic to call. */
|
||||
/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
|
||||
|
||||
@ -8,9 +8,11 @@
|
||||
/* Checks for saving and clearing prior to function call. */
|
||||
/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r0, r1, r2, r3, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r0, r1, r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler-not "vmov\.f64\td0, #1\.0" } } */
|
||||
/* { dg-final { scan-assembler "vscclrm\t\{s2-s15, VPR\}" } } */
|
||||
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
|
||||
/* Now we check that we use the correct intrinsic to call. */
|
||||
/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
|
||||
|
||||
@ -10,7 +10,9 @@
|
||||
/* { dg-final { scan-assembler-not "mov\tr0, r4" } } */
|
||||
/* { dg-final { scan-assembler-not "mov\tr2, r4" } } */
|
||||
/* { dg-final { scan-assembler-not "mov\tr3, r4" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r1, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r1, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
/* { dg-final { scan-assembler-not "vmov" } } */
|
||||
/* { dg-final { scan-assembler-not "vmsr" } } */
|
||||
|
||||
|
||||
@ -7,7 +7,9 @@
|
||||
/* Checks for saving and clearing prior to function call. */
|
||||
/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r0, r1, r2, r3, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r0, r1, r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
/* { dg-final { scan-assembler-not "vmov" } } */
|
||||
/* { dg-final { scan-assembler-not "vmsr" } } */
|
||||
|
||||
|
||||
@ -9,7 +9,9 @@
|
||||
/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler-not "mov\tr0, r4" } } */
|
||||
/* { dg-final { scan-assembler-not "mov\tr1, r4" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r2, r3, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
/* { dg-final { scan-assembler-not "vmov" } } */
|
||||
/* { dg-final { scan-assembler-not "vmsr" } } */
|
||||
|
||||
|
||||
@ -8,7 +8,9 @@
|
||||
/* Checks for saving and clearing prior to function call. */
|
||||
/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r0, r1, r2, r3, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r0, r1, r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
|
||||
/* Now we check that we use the correct intrinsic to call. */
|
||||
/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
|
||||
|
||||
@ -10,7 +10,9 @@
|
||||
/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler-not "mov\tr0, r4" } } */
|
||||
/* { dg-final { scan-assembler-not "mov\tr1, r4" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r2, r3, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
|
||||
/* Now we check that we use the correct intrinsic to call. */
|
||||
/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
|
||||
|
||||
@ -11,7 +11,9 @@
|
||||
/* { dg-final { scan-assembler-not "mov\tr0, r4" } } */
|
||||
/* { dg-final { scan-assembler-not "mov\tr2, r4" } } */
|
||||
/* { dg-final { scan-assembler-not "mov\tr3, r4" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r1, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r1, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
|
||||
/* Now we check that we use the correct intrinsic to call. */
|
||||
/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
|
||||
|
||||
@ -8,7 +8,9 @@
|
||||
/* Checks for saving and clearing prior to function call. */
|
||||
/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r0, r1, r2, r3, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r0, r1, r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
|
||||
/* Now we check that we use the correct intrinsic to call. */
|
||||
/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
|
||||
|
||||
@ -10,7 +10,9 @@
|
||||
/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler-not "mov\tr0, r4" } } */
|
||||
/* { dg-final { scan-assembler-not "mov\tr1, r4" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r2, r3, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
|
||||
/* Now we check that we use the correct intrinsic to call. */
|
||||
/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
|
||||
|
||||
@ -10,5 +10,7 @@
|
||||
/* { dg-final { scan-assembler "and\tr1, r1, ip" } } */
|
||||
/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r2, r3, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r2, r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
|
||||
|
||||
@ -14,5 +14,7 @@
|
||||
/* { dg-final { scan-assembler "and\tr2, r2, ip" } } */
|
||||
/* { dg-final { scan-assembler "lsrs\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "lsls\tr4, r4, #1" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r3, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "push\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
/* { dg-final { scan-assembler "clrm\t\{r3, r5, r6, r7, r8, r9, r10, fp, ip, APSR\}" } } */
|
||||
/* { dg-final { scan-assembler "pop\t\{r4, r5, r6, r7, r8, r9, r10, fp\}" } } */
|
||||
/* { dg-final { scan-assembler "bl\t__gnu_cmse_nonsecure_call" } } */
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user