doc: Mention vec=vec.head(n) in aliasing page.

Eigen/src/Core/Transpose.h

@@ -388,7 +388,7 @@ struct checkTransposeAliasing_impl
         eigen_assert((!check_transpose_aliasing_run_time_selector
                       <typename Derived::Scalar,blas_traits<Derived>::IsTransposed,OtherDerived>
                       ::run(extract_data(dst), other))
-          && "aliasing detected during tranposition, use transposeInPlace() "
+          && "aliasing detected during transposition, use transposeInPlace() "
              "or evaluate the rhs into a temporary using .eval()");
 
     }

doc/TopicAliasing.dox

@@ -2,7 +2,7 @@ namespace Eigen {
 
 /** \eigenManualPage TopicAliasing Aliasing
 
-In Eigen, aliasing refers to assignment statement in which the same matrix (or array or vector) appears on the
+In %Eigen, aliasing refers to assignment statement in which the same matrix (or array or vector) appears on the
 left and on the right of the assignment operators. Statements like <tt>mat = 2 * mat;</tt> or <tt>mat =
 mat.transpose();</tt> exhibit aliasing. The aliasing in the first example is harmless, but the aliasing in the
 second example leads to unexpected results. This page explains what aliasing is, when it is harmful, and what
@@ -32,7 +32,7 @@ This assignment exhibits aliasing: the coefficient \c mat(1,1) appears both in t
 <tt>mat.bottomRightCorner(2,2)</tt> on the left-hand side of the assignment and the block
 <tt>mat.topLeftCorner(2,2)</tt> on the right-hand side. After the assignment, the (2,2) entry in the bottom
 right corner should have the value of \c mat(1,1) before the assignment, which is 5. However, the output shows
-that \c mat(2,2) is actually 1. The problem is that Eigen uses lazy evaluation (see 
+that \c mat(2,2) is actually 1. The problem is that %Eigen uses lazy evaluation (see 
 \ref TopicEigenExpressionTemplates) for <tt>mat.topLeftCorner(2,2)</tt>. The result is similar to
 \code
 mat(1,1) = mat(0,0);
@@ -43,10 +43,13 @@ mat(2,2) = mat(1,1);
 Thus, \c mat(2,2) is assigned the \e new value of \c mat(1,1) instead of the old value. The next section
 explains how to solve this problem by calling \link DenseBase::eval() eval()\endlink.
 
-Note that if \c mat were a bigger, then the blocks would not overlap, and there would be no aliasing
-problem. This means that in general aliasing cannot be detected at compile time. However, Eigen does detect
-some instances of aliasing, albeit at run time.  The following example exhibiting aliasing was mentioned in
-\ref TutorialMatrixArithmetic :
+Aliasing occurs more naturally when trying to shrink a matrix. For example, the expressions <tt>vec =
+vec.head(n)</tt> and <tt>mat = mat.block(i,j,r,c)</tt> exhibit aliasing.
+
+In general, aliasing cannot be detected at compile time: if \c mat in the first example were a bit bigger,
+then the blocks would not overlap, and there would be no aliasing problem. However, %Eigen does detect some
+instances of aliasing, albeit at run time.  The following example exhibiting aliasing was mentioned in \ref
+TutorialMatrixArithmetic :
 
 <table class="example">
 <tr><th>Example</th><th>Output</th></tr>
@@ -57,24 +60,24 @@ some instances of aliasing, albeit at run time.  The following example exhibitin
 \verbinclude tut_arithmetic_transpose_aliasing.out
 </td></tr></table>
 
-Again, the output shows the aliasing issue. However, by default Eigen uses a run-time assertion to detect this
+Again, the output shows the aliasing issue. However, by default %Eigen uses a run-time assertion to detect this
 and exits with a message like
 
 \verbatim
 void Eigen::DenseBase<Derived>::checkTransposeAliasing(const OtherDerived&) const 
 [with OtherDerived = Eigen::Transpose<Eigen::Matrix<int, 2, 2, 0, 2, 2> >, Derived = Eigen::Matrix<int, 2, 2, 0, 2, 2>]: 
 Assertion `(!internal::check_transpose_aliasing_selector<Scalar,internal::blas_traits<Derived>::IsTransposed,OtherDerived>::run(internal::extract_data(derived()), other)) 
-&& "aliasing detected during tranposition, use transposeInPlace() or evaluate the rhs into a temporary using .eval()"' failed.
+&& "aliasing detected during transposition, use transposeInPlace() or evaluate the rhs into a temporary using .eval()"' failed.
 \endverbatim
 
-The user can turn Eigen's run-time assertions like the one to detect this aliasing problem off by defining the
+The user can turn %Eigen's run-time assertions like the one to detect this aliasing problem off by defining the
 EIGEN_NO_DEBUG macro, and the above program was compiled with this macro turned off in order to illustrate the
-aliasing problem. See \ref TopicAssertions for more information about Eigen's run-time assertions.
+aliasing problem. See \ref TopicAssertions for more information about %Eigen's run-time assertions.
 
 
 \section TopicAliasingSolution Resolving aliasing issues
 
-If you understand the cause of the aliasing issue, then it is obvious what must happen to solve it: Eigen has
+If you understand the cause of the aliasing issue, then it is obvious what must happen to solve it: %Eigen has
 to evaluate the right-hand side fully into a temporary matrix/array and then assign it to the left-hand
 side. The function \link DenseBase::eval() eval() \endlink does precisely that.
 
@@ -93,7 +96,7 @@ Now, \c mat(2,2) equals 5 after the assignment, as it should be.
 
 The same solution also works for the second example, with the transpose: simply replace the line 
 <tt>a = a.transpose();</tt> with <tt>a = a.transpose().eval();</tt>. However, in this common case there is a
-better solution. Eigen provides the special-purpose function 
+better solution. %Eigen provides the special-purpose function 
 \link DenseBase::transposeInPlace() transposeInPlace() \endlink which replaces a matrix by its transpose. 
 This is shown below:
 
@@ -107,7 +110,7 @@ This is shown below:
 </td></tr></table>
 
 If an xxxInPlace() function is available, then it is best to use it, because it indicates more clearly what you
-are doing. This may also allow Eigen to optimize more aggressively. These are some of the xxxInPlace()
+are doing. This may also allow %Eigen to optimize more aggressively. These are some of the xxxInPlace()
 functions provided: 
 
 <table class="manual">
@@ -120,6 +123,9 @@ functions provided:
 <tr class="alt"> <td> DenseBase::transpose() </td> <td> DenseBase::transposeInPlace() </td> </tr>
 </table>
 
+In the special case where a matrix or vector is shrunk using an expression like <tt>vec = vec.head(n)</tt>,
+you can use \link PlainObjectBase::conservativeResize() conservativeResize() \endlink.
+
 
 \section TopicAliasingCwise Aliasing and component-wise operations
 
@@ -128,8 +134,8 @@ right-hand side of an assignment operator, and it is then often necessary to eva
 explicitly. However, applying component-wise operations (such as matrix addition, scalar multiplication and
 array multiplication) is safe. 
 
-The following example has only component-wise operations. Thus, there is no need for .eval() even though
-the same matrix appears on both sides of the assignments.
+The following example has only component-wise operations. Thus, there is no need for \link DenseBase::eval()
+eval() \endlink even though the same matrix appears on both sides of the assignments.
 
 <table class="example">
 <tr><th>Example</th><th>Output</th></tr>
@@ -147,8 +153,8 @@ not necessary to evaluate the right-hand side explicitly.
 
 \section TopicAliasingMatrixMult Aliasing and matrix multiplication
 
-Matrix multiplication is the only operation in Eigen that assumes aliasing by default. Thus, if \c matA is a
-matrix, then the statement <tt>matA = matA * matA;</tt> is safe. All other operations in Eigen assume that
+Matrix multiplication is the only operation in %Eigen that assumes aliasing by default. Thus, if \c matA is a
+matrix, then the statement <tt>matA = matA * matA;</tt> is safe. All other operations in %Eigen assume that
 there are no aliasing problems, either because the result is assigned to a different matrix or because it is a
 component-wise operation.
 
@@ -161,14 +167,14 @@ component-wise operation.
 \verbinclude TopicAliasing_mult1.out
 </td></tr></table>
 
-However, this comes at a price. When executing the expression <tt>matA = matA * matA</tt>, Eigen evaluates the
-product in a temporary matrix which is assigned to \c matA after the computation. This is fine. But Eigen does
+However, this comes at a price. When executing the expression <tt>matA = matA * matA</tt>, %Eigen evaluates the
+product in a temporary matrix which is assigned to \c matA after the computation. This is fine. But %Eigen does
 the same when the product is assigned to a different matrix (e.g., <tt>matB = matA * matA</tt>). In that case,
 it is more efficient to evaluate the product directly into \c matB instead of evaluating it first into a
 temporary matrix and copying that matrix to \c matB.
 
 The user can indicate with the \link MatrixBase::noalias() noalias()\endlink function that there is no
-aliasing, as follows: <tt>matB.noalias() = matA * matA</tt>. This allows Eigen to evaluate the matrix product
+aliasing, as follows: <tt>matB.noalias() = matA * matA</tt>. This allows %Eigen to evaluate the matrix product
 <tt>matA * matA</tt> directly into \c matB.
 
 <table class="example">
@@ -199,9 +205,9 @@ Aliasing occurs when the same matrix or array coefficients appear both on the le
 an assignment operator.
  - Aliasing is harmless with coefficient-wise computations; this includes scalar multiplication and matrix or
    array addition.
- - When you multiply two matrices, Eigen assumes that aliasing occurs. If you know that there is no aliasing,
+ - When you multiply two matrices, %Eigen assumes that aliasing occurs. If you know that there is no aliasing,
    then you can use \link MatrixBase::noalias() noalias()\endlink.
- - In all other situations, Eigen assumes that there is no aliasing issue and thus gives the wrong result if
+ - In all other situations, %Eigen assumes that there is no aliasing issue and thus gives the wrong result if
    aliasing does in fact occur. To prevent this, you have to use \link DenseBase::eval() eval() \endlink or
    one of the xxxInPlace() functions.