mirror/curl
2
0
Fork 0
mirror of https://github.com/curl/curl.git synced 2024-11-27 05:50:21 +08:00
Code Issues Packages Projects Releases Wiki Activity
5591550167
curl/lib/url.c
Dan Fandrich 5591550167 Fixed a couple more locale-dependent toupper conversions, mainly for 
clarity.  This does fix one problem that causes ;type=i FTP URLs
to fail in the Turkish locale when CURLOPT_PROXY_TRANSFER_MODE is
used (test case 561)

Added tests 561 and 1092 through 1094 to test various combinations
of ;type= and ;mode= URLs that could potentially fail in the Turkish
locale.
2009-01-21 04:42:47 +00:00

4864 lines
147 KiB
C
Raw Blame History

/***************************************************************************
* _ _ ____ _
* Project ___| | | | _ \| |
* / __| | | | |_) | |
* | (__| |_| | _ <| |___
* \___|\___/|_| \_\_____|
*
* Copyright (C) 1998 - 2008, Daniel Stenberg, <daniel@haxx.se>, et al.
*
* This software is licensed as described in the file COPYING, which
* you should have received as part of this distribution. The terms
* are also available at http://curl.haxx.se/docs/copyright.html.
*
* You may opt to use, copy, modify, merge, publish, distribute and/or sell
* copies of the Software, and permit persons to whom the Software is
* furnished to do so, under the terms of the COPYING file.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
* $Id$
***************************************************************************/
/* -- WIN32 approved -- */
#include "setup.h"
#include <stdio.h>
#include <string.h>
#include <stdarg.h>
#include <stdlib.h>
#include <ctype.h>
#include <errno.h>
#ifdef WIN32
#include <time.h>
#include <io.h>
#else
#ifdef HAVE_SYS_SOCKET_H
#include <sys/socket.h>
#endif
#ifdef HAVE_NETINET_IN_H
#include <netinet/in.h>
#endif
#ifdef HAVE_SYS_TIME_H
#include <sys/time.h>
#endif
#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif
#ifdef HAVE_NETDB_H
#include <netdb.h>
#endif
#ifdef HAVE_ARPA_INET_H
#include <arpa/inet.h>
#endif
#ifdef HAVE_NET_IF_H
#include <net/if.h>
#endif
#ifdef HAVE_SYS_IOCTL_H
#include <sys/ioctl.h>
#endif
#ifdef HAVE_SYS_PARAM_H
#include <sys/param.h>
#endif
#ifdef VMS
#include <in.h>
#include <inet.h>
#endif
#ifndef HAVE_SOCKET
#error "We can't compile without socket() support!"
#endif
#endif /* WIN32 */
#ifdef USE_LIBIDN
#include <idna.h>
#include <tld.h>
#include <stringprep.h>
#ifdef HAVE_IDN_FREE_H
#include <idn-free.h>
#else
void idn_free (void *ptr); /* prototype from idn-free.h, not provided by
libidn 0.4.5's make install! */
#endif
#ifndef HAVE_IDN_FREE
/* if idn_free() was not found in this version of libidn, use plain free()
instead */
#define idn_free(x) (free)(x)
#endif
#endif /* USE_LIBIDN */
#include "urldata.h"
#include "netrc.h"
#include "formdata.h"
#include "sslgen.h"
#include "hostip.h"
#include "transfer.h"
#include "sendf.h"
#include "progress.h"
#include "cookie.h"
#include "strequal.h"
#include "strerror.h"
#include "escape.h"
#include "strtok.h"
#include "share.h"
#include "content_encoding.h"
#include "http_digest.h"
#include "http_negotiate.h"
#include "select.h"
#include "multiif.h"
#include "easyif.h"
#include "speedcheck.h"
#include "rawstr.h"
/* And now for the protocols */
#include "ftp.h"
#include "dict.h"
#include "telnet.h"
#include "tftp.h"
#include "http.h"
#include "file.h"
#include "curl_ldap.h"
#include "ssh.h"
#include "url.h"
#include "connect.h"
#include "inet_ntop.h"
#include "http_ntlm.h"
#include "socks.h"
#define _MPRINTF_REPLACE /* use our functions only */
#include <curl/mprintf.h>
#include "memory.h"
/* The last #include file should be: */
#include "memdebug.h"
/* Local static prototypes */
static long ConnectionKillOne(struct SessionHandle *data);
static void conn_free(struct connectdata *conn);
static void signalPipeClose(struct curl_llist *pipeline);
#ifdef CURL_DISABLE_VERBOSE_STRINGS
#define verboseconnect(x) do { } while (0)
#endif
/*
* Protocol table.
*/
static const struct Curl_handler * const protocols[] = {
#ifndef CURL_DISABLE_HTTP
&Curl_handler_http,
#endif
#if defined(USE_SSL) && !defined(CURL_DISABLE_HTTP)
&Curl_handler_https,
#endif
#ifndef CURL_DISABLE_FTP
&Curl_handler_ftp,
#endif
#if defined(USE_SSL) && !defined(CURL_DISABLE_FTP)
&Curl_handler_ftps,
#endif
#ifndef CURL_DISABLE_TELNET
&Curl_handler_telnet,
#endif
#ifndef CURL_DISABLE_DICT
&Curl_handler_dict,
#endif
#ifndef CURL_DISABLE_LDAP
&Curl_handler_ldap,
#endif
#if !defined(CURL_DISABLE_LDAP) && defined(HAVE_LDAP_SSL)
&Curl_handler_ldaps,
#endif
#ifndef CURL_DISABLE_FILE
&Curl_handler_file,
#endif
#ifndef CURL_DISABLE_TFTP
&Curl_handler_tftp,
#endif
#ifdef USE_LIBSSH2
&Curl_handler_scp,
&Curl_handler_sftp,
#endif
(struct Curl_handler *) NULL
};
/*
* Dummy handler for undefined protocol schemes.
*/
static const struct Curl_handler Curl_handler_dummy = {
"<no protocol>", /* scheme */
ZERO_NULL, /* setup_connection */
ZERO_NULL, /* do_it */
ZERO_NULL, /* done */
ZERO_NULL, /* do_more */
ZERO_NULL, /* connect_it */
ZERO_NULL, /* connecting */
ZERO_NULL, /* doing */
ZERO_NULL, /* proto_getsock */
ZERO_NULL, /* doing_getsock */
ZERO_NULL, /* perform_getsock */
ZERO_NULL, /* disconnect */
0, /* defport */
0 /* protocol */
};
void Curl_safefree(void *ptr)
{
if(ptr)
free(ptr);
}
/* Copy an upper case version of the string from src to dest. The
* strings may overlap. No more than n characters of the string are copied
* (including any NUL) and the destination string will NOT be
* NUL-terminated if that limit is reached.
*/
void Curl_strntoupper(char *dest, const char *src, size_t n)
{
if (n < 1)
return;
do {
*dest++ = Curl_raw_toupper(*src);
} while (*src++ && --n);
}
static void close_connections(struct SessionHandle *data)
{
/* Loop through all open connections and kill them one by one */
long i;
do {
i = ConnectionKillOne(data);
} while(i != -1L);
}
void Curl_freeset(struct SessionHandle * data)
{
/* Free all dynamic strings stored in the data->set substructure. */
enum dupstring i;
for(i=(enum dupstring)0; i < STRING_LAST; i++)
Curl_safefree(data->set.str[i]);
}
static CURLcode setstropt(char **charp, char * s)
{
/* Release the previous storage at `charp' and replace by a dynamic storage
copy of `s'. Return CURLE_OK or CURLE_OUT_OF_MEMORY. */
if(*charp) {
free(*charp);
*charp = (char *) NULL;
}
if(s) {
s = strdup(s);
if(!s)
return CURLE_OUT_OF_MEMORY;
*charp = s;
}
return CURLE_OK;
}
static CURLcode setstropt_userpwd(char *option, char **user_storage,
char **pwd_storage)
{
char* separator;
CURLcode result = CURLE_OK;
if(!option)
return result;
separator = strchr(option, ':');
if (separator != NULL) {
/* store username part of option */
char * p;
size_t username_len = (size_t)(separator-option);
p = malloc(username_len+1);
if(!p)
result = CURLE_OUT_OF_MEMORY;
else {
memcpy(p, option, username_len);
p[username_len] = '\0';
Curl_safefree(*user_storage);
*user_storage = p;
}
/* store password part of option */
if (result == CURLE_OK) {
result = setstropt(pwd_storage, separator+1);
}
}
else {
result = setstropt(user_storage, option);
}
return result;
}
CURLcode Curl_dupset(struct SessionHandle * dst, struct SessionHandle * src)
{
CURLcode r = CURLE_OK;
enum dupstring i;
/* Copy src->set into dst->set first, then deal with the strings
afterwards */
dst->set = src->set;
/* clear all string pointers first */
memset(dst->set.str, 0, STRING_LAST * sizeof(char *));
/* duplicate all strings */
for(i=(enum dupstring)0; i< STRING_LAST; i++) {
r = setstropt(&dst->set.str[i], src->set.str[i]);
if(r != CURLE_OK)
break;
}
/* If a failure occurred, freeing has to be performed externally. */
return r;
}
#if !defined(CURL_DISABLE_HTTP) && !defined(CURL_DISABLE_COOKIES)
static void flush_cookies(struct SessionHandle *data, int cleanup)
{
if(data->set.str[STRING_COOKIEJAR]) {
if(data->change.cookielist) {
/* If there is a list of cookie files to read, do it first so that
we have all the told files read before we write the new jar.
Curl_cookie_loadfiles() LOCKS and UNLOCKS the share itself! */
Curl_cookie_loadfiles(data);
}
Curl_share_lock(data, CURL_LOCK_DATA_COOKIE, CURL_LOCK_ACCESS_SINGLE);
/* if we have a destination file for all the cookies to get dumped to */
if(Curl_cookie_output(data->cookies, data->set.str[STRING_COOKIEJAR]))
infof(data, "WARNING: failed to save cookies in %s\n",
data->set.str[STRING_COOKIEJAR]);
}
else {
if(cleanup && data->change.cookielist)
/* since nothing is written, we can just free the list of cookie file
names */
curl_slist_free_all(data->change.cookielist); /* clean up list */
Curl_share_lock(data, CURL_LOCK_DATA_COOKIE, CURL_LOCK_ACCESS_SINGLE);
}
if(cleanup && (!data->share || (data->cookies != data->share->cookies))) {
Curl_cookie_cleanup(data->cookies);
}
Curl_share_unlock(data, CURL_LOCK_DATA_COOKIE);
}
#endif
/*
* This is the internal function curl_easy_cleanup() calls. This should
* cleanup and free all resources associated with this sessionhandle.
*
* NOTE: if we ever add something that attempts to write to a socket or
* similar here, we must ignore SIGPIPE first. It is currently only done
* when curl_easy_perform() is invoked.
*/
CURLcode Curl_close(struct SessionHandle *data)
{
struct Curl_multi *m = data->multi;
#ifdef CURLDEBUG
/* only for debugging, scan through all connections and see if there's a
pipe reference still identifying this handle */
if(data->state.connc && data->state.connc->type == CONNCACHE_MULTI) {
struct conncache *c = data->state.connc;
long i;
struct curl_llist *pipeline;
struct curl_llist_element *curr;
struct connectdata *connptr;
for(i=0; i< c->num; i++) {
connptr = c->connects[i];
if(!connptr)
continue;
pipeline = connptr->send_pipe;
if(pipeline) {
for (curr = pipeline->head; curr; curr=curr->next) {
if(data == (struct SessionHandle *) curr->ptr) {
fprintf(stderr,
"MAJOR problem we %p are still in send pipe for %p done %d\n",
data, connptr, (int)connptr->bits.done);
}
}
}
pipeline = connptr->recv_pipe;
if(pipeline) {
for (curr = pipeline->head; curr; curr=curr->next) {
if(data == (struct SessionHandle *) curr->ptr) {
fprintf(stderr,
"MAJOR problem we %p are still in recv pipe for %p done %d\n",
data, connptr, (int)connptr->bits.done);
}
}
}
pipeline = connptr->pend_pipe;
if(pipeline) {
for (curr = pipeline->head; curr; curr=curr->next) {
if(data == (struct SessionHandle *) curr->ptr) {
fprintf(stderr,
"MAJOR problem we %p are still in pend pipe for %p done %d\n",
data, connptr, (int)connptr->bits.done);
}
}
}
}
}
#endif
if(m)
/* This handle is still part of a multi handle, take care of this first
and detach this handle from there. */
Curl_multi_rmeasy(data->multi, data);
data->magic = 0; /* force a clear AFTER the possibly enforced removal from
the multi handle, since that function uses the magic
field! */
if(data->state.connc) {
if(data->state.connc->type == CONNCACHE_PRIVATE) {
/* close all connections still alive that are in the private connection
cache, as we no longer have the pointer left to the shared one. */
close_connections(data);
/* free the connection cache if allocated privately */
Curl_rm_connc(data->state.connc);
}
}
if(data->state.shared_conn) {
/* marked to be used by a pending connection so we can't kill this handle
just yet */
data->state.closed = TRUE;
return CURLE_OK;
}
if(data->dns.hostcachetype == HCACHE_PRIVATE) {
Curl_hash_destroy(data->dns.hostcache);
data->dns.hostcachetype = HCACHE_NONE;
data->dns.hostcache = NULL;
}
if(data->state.rangestringalloc)
free(data->state.range);
/* Free the pathbuffer */
Curl_safefree(data->state.pathbuffer);
Curl_safefree(data->state.proto.generic);
/* Close down all open SSL info and sessions */
Curl_ssl_close_all(data);
Curl_safefree(data->state.first_host);
Curl_safefree(data->state.scratch);
Curl_ssl_free_certinfo(data);
if(data->change.referer_alloc)
free(data->change.referer);
if(data->change.url_alloc)
free(data->change.url);
Curl_safefree(data->state.headerbuff);
#if !defined(CURL_DISABLE_HTTP) && !defined(CURL_DISABLE_COOKIES)
flush_cookies(data, 1);
#endif
Curl_digest_cleanup(data);
Curl_safefree(data->info.contenttype);
Curl_safefree(data->info.wouldredirect);
/* this destroys the channel and we cannot use it anymore after this */
ares_destroy(data->state.areschannel);
#if defined(CURL_DOES_CONVERSIONS) && defined(HAVE_ICONV)
/* close iconv conversion descriptors */
if(data->inbound_cd != (iconv_t)-1) {
iconv_close(data->inbound_cd);
}
if(data->outbound_cd != (iconv_t)-1) {
iconv_close(data->outbound_cd);
}
if(data->utf8_cd != (iconv_t)-1) {
iconv_close(data->utf8_cd);
}
#endif /* CURL_DOES_CONVERSIONS && HAVE_ICONV */
/* No longer a dirty share, if it exists */
if(data->share) {
Curl_share_lock(data, CURL_LOCK_DATA_SHARE, CURL_LOCK_ACCESS_SINGLE);
data->share->dirty--;
Curl_share_unlock(data, CURL_LOCK_DATA_SHARE);
}
Curl_freeset(data);
free(data);
return CURLE_OK;
}
/* create a connection cache of a private or multi type */
struct conncache *Curl_mk_connc(int type,
long amount) /* set -1 to use default */
{
/* It is subject for debate how many default connections to have for a multi
connection cache... */
struct conncache *c;
long default_amount;
if(type == CONNCACHE_PRIVATE) {
default_amount = (amount < 0) ? 5 : amount;
}
else {
default_amount = (amount < 0) ? 10 : amount;
}
c= calloc(sizeof(struct conncache), 1);
if(!c)
return NULL;
if((size_t)(default_amount) > ((size_t)-1) / sizeof(struct connectdata *))
default_amount = ((size_t)-1) / sizeof(struct connectdata *);
c->connects = calloc(sizeof(struct connectdata *), (size_t)default_amount);
if(!c->connects) {
free(c);
return NULL;
}
c->num = default_amount;
return c;
}
/* Change number of entries of a connection cache */
CURLcode Curl_ch_connc(struct SessionHandle *data,
struct conncache *c,
long newamount)
{
long i;
struct connectdata **newptr;
if(newamount < 1)
newamount = 1; /* we better have at least one entry */
if(!c) {
/* we get a NULL pointer passed in as connection cache, which means that
there is no cache created for this SessionHandle just yet, we create a
brand new with the requested size.
*/
data->state.connc = Curl_mk_connc(CONNCACHE_PRIVATE, newamount);
if(!data->state.connc)
return CURLE_OUT_OF_MEMORY;
return CURLE_OK;
}
if(newamount < c->num) {
/* Since this number is *decreased* from the existing number, we must
close the possibly open connections that live on the indexes that
are being removed!
NOTE: for conncache_multi cases we must make sure that we only
close handles not in use.
*/
for(i=newamount; i< c->num; i++)
Curl_disconnect(c->connects[i]);
/* If the most recent connection is no longer valid, mark it
invalid. */
if(data->state.lastconnect <= newamount)
data->state.lastconnect = -1;
}
if(newamount > 0) {
newptr = realloc(c->connects, sizeof(struct connectdata *) * newamount);
if(!newptr)
/* we closed a few connections in vain, but so what? */
return CURLE_OUT_OF_MEMORY;
/* nullify the newly added pointers */
for(i=c->num; i<newamount; i++)
newptr[i] = NULL;
c->connects = newptr;
c->num = newamount;
}
/* we no longer support less than 1 as size for the connection cache, and
I'm not sure it ever worked to set it to zero */
return CURLE_OK;
}
/* Free a connection cache. This is called from Curl_close() and
curl_multi_cleanup(). */
void Curl_rm_connc(struct conncache *c)
{
if(c->connects) {
long i;
for(i = 0; i < c->num; ++i)
conn_free(c->connects[i]);
free(c->connects);
}
free(c);
}
/*
* Initialize the UserDefined fields within a SessionHandle.
* This may be safely called on a new or existing SessionHandle.
*/
CURLcode Curl_init_userdefined(struct UserDefined *set)
{
CURLcode res = CURLE_OK;
set->out = stdout; /* default output to stdout */
set->in = stdin; /* default input from stdin */
set->err = stderr; /* default stderr to stderr */
/* use fwrite as default function to store output */
set->fwrite_func = (curl_write_callback)fwrite;
/* use fread as default function to read input */
set->fread_func = (curl_read_callback)fread;
set->seek_func = ZERO_NULL;
set->seek_client = ZERO_NULL;
/* conversion callbacks for non-ASCII hosts */
set->convfromnetwork = ZERO_NULL;
set->convtonetwork = ZERO_NULL;
set->convfromutf8 = ZERO_NULL;
set->infilesize = -1; /* we don't know any size */
set->postfieldsize = -1; /* unknown size */
set->maxredirs = -1; /* allow any amount by default */
set->httpreq = HTTPREQ_GET; /* Default HTTP request */
set->ftp_use_epsv = TRUE; /* FTP defaults to EPSV operations */
set->ftp_use_eprt = TRUE; /* FTP defaults to EPRT operations */
set->ftp_filemethod = FTPFILE_MULTICWD;
set->dns_cache_timeout = 60; /* Timeout every 60 seconds by default */
/* Set the default size of the SSL session ID cache */
set->ssl.numsessions = 5;
set->proxyport = CURL_DEFAULT_PROXY_PORT; /* from url.h */
set->proxytype = CURLPROXY_HTTP; /* defaults to HTTP proxy */
set->httpauth = CURLAUTH_BASIC; /* defaults to basic */
set->proxyauth = CURLAUTH_BASIC; /* defaults to basic */
/* make libcurl quiet by default: */
set->hide_progress = TRUE; /* CURLOPT_NOPROGRESS changes these */
/*
* libcurl 7.10 introduced SSL verification *by default*! This needs to be
* switched off unless wanted.
*/
set->ssl.verifypeer = TRUE;
set->ssl.verifyhost = 2;
set->ssh_auth_types = CURLSSH_AUTH_DEFAULT; /* defaults to any auth
type */
set->ssl.sessionid = TRUE; /* session ID caching enabled by default */
set->new_file_perms = 0644; /* Default permissions */
set->new_directory_perms = 0755; /* Default permissions */
/* This is our preferred CA cert bundle/path since install time */
#if defined(CURL_CA_BUNDLE)
res = setstropt(&set->str[STRING_SSL_CAFILE], (char *) CURL_CA_BUNDLE);
#elif defined(CURL_CA_PATH)
res = setstropt(&set->str[STRING_SSL_CAPATH], (char *) CURL_CA_PATH);
#endif
return res;
}
/**
* Curl_open()
*
* @param curl is a pointer to a sessionhandle pointer that gets set by this
* function.
* @return CURLcode
*/
CURLcode Curl_open(struct SessionHandle **curl)
{
CURLcode res = CURLE_OK;
struct SessionHandle *data;
#ifdef USE_ARES
int status;
#endif
/* Very simple start-up: alloc the struct, init it with zeroes and return */
data = calloc(1, sizeof(struct SessionHandle));
if(!data) {
/* this is a very serious error */
DEBUGF(fprintf(stderr, "Error: calloc of SessionHandle failed\n"));
return CURLE_OUT_OF_MEMORY;
}
data->magic = CURLEASY_MAGIC_NUMBER;
#ifdef USE_ARES
if((status = ares_init(&data->state.areschannel)) != ARES_SUCCESS) {
DEBUGF(fprintf(stderr, "Error: ares_init failed\n"));
free(data);
if(status == ARES_ENOMEM)
return CURLE_OUT_OF_MEMORY;
else
return CURLE_FAILED_INIT;
}
/* make sure that all other returns from this function should destroy the
ares channel before returning error! */
#endif
/* We do some initial setup here, all those fields that can't be just 0 */
data->state.headerbuff = malloc(HEADERSIZE);
if(!data->state.headerbuff) {
DEBUGF(fprintf(stderr, "Error: malloc of headerbuff failed\n"));
res = CURLE_OUT_OF_MEMORY;
}
else {
Curl_easy_initHandleData(data);
res = Curl_init_userdefined(&data->set);
data->state.headersize=HEADERSIZE;
#if defined(CURL_DOES_CONVERSIONS) && defined(HAVE_ICONV)
/* conversion descriptors for iconv calls */
data->outbound_cd = (iconv_t)-1;
data->inbound_cd = (iconv_t)-1;
data->utf8_cd = (iconv_t)-1;
#endif /* CURL_DOES_CONVERSIONS && HAVE_ICONV */
/* most recent connection is not yet defined */
data->state.lastconnect = -1;
data->progress.flags |= PGRS_HIDE;
data->state.current_speed = -1; /* init to negative == impossible */
/* This no longer creates a connection cache here. It is instead made on
the first call to curl_easy_perform() or when the handle is added to a
multi stack. */
}
if(res) {
ares_destroy(data->state.areschannel);
if(data->state.headerbuff)
free(data->state.headerbuff);
Curl_freeset(data);
free(data);
data = NULL;
}
else
*curl = data;
return res;
}
CURLcode Curl_setopt(struct SessionHandle *data, CURLoption option,
va_list param)
{
char *argptr;
CURLcode result = CURLE_OK;
#ifndef CURL_DISABLE_HTTP
curl_off_t bigsize;
#endif
switch(option) {
case CURLOPT_DNS_CACHE_TIMEOUT:
data->set.dns_cache_timeout = va_arg(param, long);
break;
case CURLOPT_DNS_USE_GLOBAL_CACHE:
{
/* remember we want this enabled */
long use_cache = va_arg(param, long);
data->set.global_dns_cache = (bool)(0 != use_cache);
}
break;
case CURLOPT_SSL_CIPHER_LIST:
/* set a list of cipher we want to use in the SSL connection */
result = setstropt(&data->set.str[STRING_SSL_CIPHER_LIST],
va_arg(param, char *));
break;
case CURLOPT_RANDOM_FILE:
/*
* This is the path name to a file that contains random data to seed
* the random SSL stuff with. The file is only used for reading.
*/
result = setstropt(&data->set.str[STRING_SSL_RANDOM_FILE],
va_arg(param, char *));
break;
case CURLOPT_EGDSOCKET:
/*
* The Entropy Gathering Daemon socket pathname
*/
result = setstropt(&data->set.str[STRING_SSL_EGDSOCKET],
va_arg(param, char *));
break;
case CURLOPT_MAXCONNECTS:
/*
* Set the absolute number of maximum simultaneous alive connection that
* libcurl is allowed to have.
*/
result = Curl_ch_connc(data, data->state.connc, va_arg(param, long));
break;
case CURLOPT_FORBID_REUSE:
/*
* When this transfer is done, it must not be left to be reused by a
* subsequent transfer but shall be closed immediately.
*/
data->set.reuse_forbid = (bool)(0 != va_arg(param, long));
break;
case CURLOPT_FRESH_CONNECT:
/*
* This transfer shall not use a previously cached connection but
* should be made with a fresh new connect!
*/
data->set.reuse_fresh = (bool)(0 != va_arg(param, long));
break;
case CURLOPT_VERBOSE:
/*
* Verbose means infof() calls that give a lot of information about
* the connection and transfer procedures as well as internal choices.
*/
data->set.verbose = (bool)(0 != va_arg(param, long));
break;
case CURLOPT_HEADER:
/*
* Set to include the header in the general data output stream.
*/
data->set.include_header = (bool)(0 != va_arg(param, long));
break;
case CURLOPT_NOPROGRESS:
/*
* Shut off the internal supported progress meter
*/
data->set.hide_progress = (bool)(0 != va_arg(param, long));
if(data->set.hide_progress)
data->progress.flags |= PGRS_HIDE;
else
data->progress.flags &= ~PGRS_HIDE;
break;
case CURLOPT_NOBODY:
/*
* Do not include the body part in the output data stream.
*/
data->set.opt_no_body = (bool)(0 != va_arg(param, long));
/* in HTTP lingo, no body means using the HEAD request and if unset there
really is no perfect method that is the "opposite" of HEAD but in
reality most people probably think GET then. The important thing is
that we can't let it remain HEAD if the opt_no_body is set FALSE since
then we'll behave wrong when getting HTTP. */
data->set.httpreq = data->set.opt_no_body?HTTPREQ_HEAD:HTTPREQ_GET;
break;
case CURLOPT_FAILONERROR:
/*
* Don't output the >=300 error code HTML-page, but instead only
* return error.
*/
data->set.http_fail_on_error = (bool)(0 != va_arg(param, long));
break;
case CURLOPT_UPLOAD:
case CURLOPT_PUT:
/*
* We want to sent data to the remote host. If this is HTTP, that equals
* using the PUT request.
*/
data->set.upload = (bool)(0 != va_arg(param, long));
if(data->set.upload)
/* If this is HTTP, PUT is what's needed to "upload" */
data->set.httpreq = HTTPREQ_PUT;
else
/* In HTTP, the opposite of upload is either GET or a HEAD */
data->set.httpreq = data->set.opt_no_body?HTTPREQ_HEAD:HTTPREQ_GET;
break;
case CURLOPT_FILETIME:
/*
* Try to get the file time of the remote document. The time will
* later (possibly) become available using curl_easy_getinfo().
*/
data->set.get_filetime = (bool)(0 != va_arg(param, long));
break;
case CURLOPT_FTP_CREATE_MISSING_DIRS:
/*
* An FTP option that modifies an upload to create missing directories on
* the server.
*/
data->set.ftp_create_missing_dirs = (bool)(0 != va_arg(param, long));
break;
case CURLOPT_FTP_RESPONSE_TIMEOUT:
/*
* An FTP option that specifies how quickly an FTP response must be
* obtained before it is considered failure.
*/
data->set.ftp_response_timeout = va_arg( param , long ) * 1000;
break;
case CURLOPT_DIRLISTONLY:
/*
* An option that changes the command to one that asks for a list
* only, no file info details.
*/
data->set.ftp_list_only = (bool)(0 != va_arg(param, long));
break;
case CURLOPT_APPEND:
/*
* We want to upload and append to an existing file.
*/
data->set.ftp_append = (bool)(0 != va_arg(param, long));
break;
case CURLOPT_FTP_FILEMETHOD:
/*
* How do access files over FTP.
*/
data->set.ftp_filemethod = (curl_ftpfile)va_arg(param, long);
break;
case CURLOPT_NETRC:
/*
* Parse the $HOME/.netrc file
*/
data->set.use_netrc = (enum CURL_NETRC_OPTION)va_arg(param, long);
break;
case CURLOPT_NETRC_FILE:
/*
* Use this file instead of the $HOME/.netrc file
*/
result = setstropt(&data->set.str[STRING_NETRC_FILE],
va_arg(param, char *));
break;
case CURLOPT_TRANSFERTEXT:
/*
* This option was previously named 'FTPASCII'. Renamed to work with
* more protocols than merely FTP.
*
* Transfer using ASCII (instead of BINARY).
*/
data->set.prefer_ascii = (bool)(0 != va_arg(param, long));
break;
case CURLOPT_TIMECONDITION:
/*
* Set HTTP time condition. This must be one of the defines in the
* curl/curl.h header file.
*/
data->set.timecondition = (curl_TimeCond)va_arg(param, long);
break;
case CURLOPT_TIMEVALUE:
/*
* This is the value to compare with the remote document with the
* method set with CURLOPT_TIMECONDITION
*/
data->set.timevalue = (time_t)va_arg(param, long);
break;
case CURLOPT_SSLVERSION:
/*
* Set explicit SSL version to try to connect with, as some SSL
* implementations are lame.
*/
data->set.ssl.version = va_arg(param, long);
break;
#ifndef CURL_DISABLE_HTTP
case CURLOPT_AUTOREFERER:
/*
* Switch on automatic referer that gets set if curl follows locations.
*/
data->set.http_auto_referer = (bool)(0 != va_arg(param, long));
break;
case CURLOPT_ENCODING:
/*
* String to use at the value of Accept-Encoding header.
*
* If the encoding is set to "" we use an Accept-Encoding header that
* encompasses all the encodings we support.
* If the encoding is set to NULL we don't send an Accept-Encoding header
* and ignore an received Content-Encoding header.
*
*/
argptr = va_arg(param, char *);
result = setstropt(&data->set.str[STRING_ENCODING],
(argptr && !*argptr)?
(char *) ALL_CONTENT_ENCODINGS: argptr);
break;
case CURLOPT_FOLLOWLOCATION:
/*
* Follow Location: header hints on a HTTP-server.
*/
data->set.http_follow_location = (bool)(0 != va_arg(param, long));
break;
case CURLOPT_UNRESTRICTED_AUTH:
/*
* Send authentication (user+password) when following locations, even when
* hostname changed.
*/
data->set.http_disable_hostname_check_before_authentication =
(bool)(0 != va_arg(param, long));
break;
case CURLOPT_MAXREDIRS:
/*
* The maximum amount of hops you allow curl to follow Location:
* headers. This should mostly be used to detect never-ending loops.
*/
data->set.maxredirs = va_arg(param, long);
break;
case CURLOPT_POSTREDIR:
{
/*
* Set the behaviour of POST when redirecting
* CURL_REDIR_GET_ALL - POST is changed to GET after 301 and 302
* CURL_REDIR_POST_301 - POST is kept as POST after 301
* CURL_REDIR_POST_302 - POST is kept as POST after 302
* CURL_REDIR_POST_ALL - POST is kept as POST after 301 and 302
* other - POST is kept as POST after 301 and 302
*/
long postRedir = va_arg(param, long);
data->set.post301 = (bool)((postRedir & CURL_REDIR_POST_301)?TRUE:FALSE);
data->set.post302 = (bool)((postRedir & CURL_REDIR_POST_302)?TRUE:FALSE);
}
break;
case CURLOPT_POST:
/* Does this option serve a purpose anymore? Yes it does, when
CURLOPT_POSTFIELDS isn't used and the POST data is read off the
callback! */
if(va_arg(param, long)) {
data->set.httpreq = HTTPREQ_POST;
data->set.opt_no_body = FALSE; /* this is implied */
}
else
data->set.httpreq = HTTPREQ_GET;
break;
case CURLOPT_COPYPOSTFIELDS:
/*
* A string with POST data. Makes curl HTTP POST. Even if it is NULL.
* If needed, CURLOPT_POSTFIELDSIZE must have been set prior to
* CURLOPT_COPYPOSTFIELDS and not altered later.
*/
argptr = va_arg(param, char *);
if(!argptr || data->set.postfieldsize == -1)
result = setstropt(&data->set.str[STRING_COPYPOSTFIELDS], argptr);
else {
/*
* Check that requested length does not overflow the size_t type.
*/
if((data->set.postfieldsize < 0) ||
((sizeof(curl_off_t) != sizeof(size_t)) &&
(data->set.postfieldsize > (curl_off_t)((size_t)-1))))
result = CURLE_OUT_OF_MEMORY;
else {
char * p;
(void) setstropt(&data->set.str[STRING_COPYPOSTFIELDS], NULL);
/* Allocate even when size == 0. This satisfies the need of possible
later address compare to detect the COPYPOSTFIELDS mode, and
to mark that postfields is used rather than read function or
form data.
*/
p = malloc((size_t)(data->set.postfieldsize?data->set.postfieldsize:1));
if(!p)
result = CURLE_OUT_OF_MEMORY;
else {
if(data->set.postfieldsize)
memcpy(p, argptr, (size_t)data->set.postfieldsize);
data->set.str[STRING_COPYPOSTFIELDS] = p;
}
}
}
data->set.postfields = data->set.str[STRING_COPYPOSTFIELDS];
data->set.httpreq = HTTPREQ_POST;
break;
case CURLOPT_POSTFIELDS:
/*
* Like above, but use static data instead of copying it.
*/
data->set.postfields = va_arg(param, void *);
/* Release old copied data. */
(void) setstropt(&data->set.str[STRING_COPYPOSTFIELDS], NULL);
data->set.httpreq = HTTPREQ_POST;
break;
case CURLOPT_POSTFIELDSIZE:
/*
* The size of the POSTFIELD data to prevent libcurl to do strlen() to
* figure it out. Enables binary posts.
*/
bigsize = va_arg(param, long);
if(data->set.postfieldsize < bigsize &&
data->set.postfields == data->set.str[STRING_COPYPOSTFIELDS]) {
/* Previous CURLOPT_COPYPOSTFIELDS is no longer valid. */
(void) setstropt(&data->set.str[STRING_COPYPOSTFIELDS], NULL);
data->set.postfields = NULL;
}
data->set.postfieldsize = bigsize;
break;
case CURLOPT_POSTFIELDSIZE_LARGE:
/*
* The size of the POSTFIELD data to prevent libcurl to do strlen() to
* figure it out. Enables binary posts.
*/
bigsize = va_arg(param, curl_off_t);
if(data->set.postfieldsize < bigsize &&
data->set.postfields == data->set.str[STRING_COPYPOSTFIELDS]) {
/* Previous CURLOPT_COPYPOSTFIELDS is no longer valid. */
(void) setstropt(&data->set.str[STRING_COPYPOSTFIELDS], NULL);
data->set.postfields = NULL;
}
data->set.postfieldsize = bigsize;
break;
case CURLOPT_HTTPPOST:
/*
* Set to make us do HTTP POST
*/
data->set.httppost = va_arg(param, struct curl_httppost *);
data->set.httpreq = HTTPREQ_POST_FORM;
data->set.opt_no_body = FALSE; /* this is implied */
break;
case CURLOPT_REFERER:
/*
* String to set in the HTTP Referer: field.
*/
if(data->change.referer_alloc) {
free(data->change.referer);
data->change.referer_alloc = FALSE;
}
result = setstropt(&data->set.str[STRING_SET_REFERER],
va_arg(param, char *));
data->change.referer = data->set.str[STRING_SET_REFERER];
break;
case CURLOPT_USERAGENT:
/*
* String to use in the HTTP User-Agent field
*/
result = setstropt(&data->set.str[STRING_USERAGENT],
va_arg(param, char *));
break;
case CURLOPT_HTTPHEADER:
/*
* Set a list with HTTP headers to use (or replace internals with)
*/
data->set.headers = va_arg(param, struct curl_slist *);
break;
case CURLOPT_HTTP200ALIASES:
/*
* Set a list of aliases for HTTP 200 in response header
*/
data->set.http200aliases = va_arg(param, struct curl_slist *);
break;
#if !defined(CURL_DISABLE_COOKIES)
case CURLOPT_COOKIE:
/*
* Cookie string to send to the remote server in the request.
*/
result = setstropt(&data->set.str[STRING_COOKIE],
va_arg(param, char *));
break;
case CURLOPT_COOKIEFILE:
/*
* Set cookie file to read and parse. Can be used multiple times.
*/
argptr = (char *)va_arg(param, void *);
if(argptr) {
struct curl_slist *cl;
/* append the cookie file name to the list of file names, and deal with
them later */
cl = curl_slist_append(data->change.cookielist, argptr);
if(!cl)
return CURLE_OUT_OF_MEMORY;
data->change.cookielist = cl; /* store the list for later use */
}
break;
case CURLOPT_COOKIEJAR:
/*
* Set cookie file name to dump all cookies to when we're done.
*/
result = setstropt(&data->set.str[STRING_COOKIEJAR],
va_arg(param, char *));
/*
* Activate the cookie parser. This may or may not already
* have been made.
*/
data->cookies = Curl_cookie_init(data, NULL, data->cookies,
data->set.cookiesession);
break;
case CURLOPT_COOKIESESSION:
/*
* Set this option to TRUE to start a new "cookie session". It will
* prevent the forthcoming read-cookies-from-file actions to accept
* cookies that are marked as being session cookies, as they belong to a
* previous session.
*
* In the original Netscape cookie spec, "session cookies" are cookies
* with no expire date set. RFC2109 describes the same action if no
* 'Max-Age' is set and RFC2965 includes the RFC2109 description and adds
* a 'Discard' action that can enforce the discard even for cookies that
* have a Max-Age.
*
* We run mostly with the original cookie spec, as hardly anyone implements
* anything else.
*/
data->set.cookiesession = (bool)(0 != va_arg(param, long));
break;
case CURLOPT_COOKIELIST:
argptr = va_arg(param, char *);
if(argptr == NULL)
break;
if(Curl_raw_equal(argptr, "ALL")) {
/* clear all cookies */
Curl_cookie_clearall(data->cookies);
break;
}
else if(Curl_raw_equal(argptr, "SESS")) {
/* clear session cookies */
Curl_cookie_clearsess(data->cookies);
break;
}
else if(Curl_raw_equal(argptr, "FLUSH")) {
/* flush cookies to file */
flush_cookies(data, 0);
break;
}
if(!data->cookies)
/* if cookie engine was not running, activate it */
data->cookies = Curl_cookie_init(data, NULL, NULL, TRUE);
argptr = strdup(argptr);
if(!argptr) {
result = CURLE_OUT_OF_MEMORY;
break;
}
if(checkprefix("Set-Cookie:", argptr))
/* HTTP Header format line */
Curl_cookie_add(data, data->cookies, TRUE, argptr + 11, NULL, NULL);
else
/* Netscape format line */
Curl_cookie_add(data, data->cookies, FALSE, argptr, NULL, NULL);
free(argptr);
break;
#endif /* CURL_DISABLE_COOKIES */
case CURLOPT_HTTPGET:
/*
* Set to force us do HTTP GET
*/
if(va_arg(param, long)) {
data->set.httpreq = HTTPREQ_GET;
data->set.upload = FALSE; /* switch off upload */
data->set.opt_no_body = FALSE; /* this is implied */
}
break;
case CURLOPT_HTTP_VERSION:
/*
* This sets a requested HTTP version to be used. The value is one of
* the listed enums in curl/curl.h.
*/
data->set.httpversion = va_arg(param, long);
break;
case CURLOPT_CUSTOMREQUEST:
/*
* Set a custom string to use as request
*/
result = setstropt(&data->set.str[STRING_CUSTOMREQUEST],
va_arg(param, char *));
/* we don't set
data->set.httpreq = HTTPREQ_CUSTOM;
here, we continue as if we were using the already set type
and this just changes the actual request keyword */
break;
case CURLOPT_HTTPAUTH:
/*
* Set HTTP Authentication type BITMASK.
*/
{
long auth = va_arg(param, long);
/* the DIGEST_IE bit is only used to set a special marker, for all the
rest we need to handle it as normal DIGEST */
data->state.authhost.iestyle = (auth & CURLAUTH_DIGEST_IE)?TRUE:FALSE;
if(auth & CURLAUTH_DIGEST_IE) {
auth |= CURLAUTH_DIGEST; /* set standard digest bit */
auth &= ~CURLAUTH_DIGEST_IE; /* unset ie digest bit */
}
/* switch off bits we can't support */
#ifndef USE_NTLM
auth &= ~CURLAUTH_NTLM; /* no NTLM without SSL */
#endif
#ifndef HAVE_GSSAPI
auth &= ~CURLAUTH_GSSNEGOTIATE; /* no GSS-Negotiate without GSSAPI */
#endif
if(!auth)
return CURLE_FAILED_INIT; /* no supported types left! */
data->set.httpauth = auth;
}
break;
#ifndef CURL_DISABLE_PROXY
case CURLOPT_HTTPPROXYTUNNEL:
/*
* Tunnel operations through the proxy instead of normal proxy use
*/
data->set.tunnel_thru_httpproxy = (bool)(0 != va_arg(param, long));
break;
case CURLOPT_PROXYPORT:
/*
* Explicitly set HTTP proxy port number.
*/
data->set.proxyport = va_arg(param, long);
break;
case CURLOPT_PROXYAUTH:
/*
* Set HTTP Authentication type BITMASK.
*/
{
long auth = va_arg(param, long);
/* the DIGEST_IE bit is only used to set a special marker, for all the
rest we need to handle it as normal DIGEST */
data->state.authproxy.iestyle = (auth & CURLAUTH_DIGEST_IE)?TRUE:FALSE;
if(auth & CURLAUTH_DIGEST_IE) {
auth |= CURLAUTH_DIGEST; /* set standard digest bit */
auth &= ~CURLAUTH_DIGEST_IE; /* unset ie digest bit */
}
/* switch off bits we can't support */
#ifndef USE_NTLM
auth &= ~CURLAUTH_NTLM; /* no NTLM without SSL */
#endif
#ifndef HAVE_GSSAPI
auth &= ~CURLAUTH_GSSNEGOTIATE; /* no GSS-Negotiate without GSSAPI */
#endif
if(!auth)
return CURLE_FAILED_INIT; /* no supported types left! */
data->set.proxyauth = auth;
}
break;
#endif /* CURL_DISABLE_HTTP */
case CURLOPT_PROXY:
/*
* Set proxy server:port to use as HTTP proxy.
*
* If the proxy is set to "" we explicitly say that we don't want to use a
* proxy (even though there might be environment variables saying so).
*
* Setting it to NULL, means no proxy but allows the environment variables
* to decide for us.
*/
result = setstropt(&data->set.str[STRING_PROXY],
va_arg(param, char *));
break;
case CURLOPT_PROXYTYPE:
/*
* Set proxy type. HTTP/SOCKS4/SOCKS4a/SOCKS5/SOCKS5_HOSTNAME
*/
data->set.proxytype = (curl_proxytype)va_arg(param, long);
break;
case CURLOPT_PROXY_TRANSFER_MODE:
/*
* set transfer mode (;type=<a|i>) when doing FTP via an HTTP proxy
*/
switch (va_arg(param, long)) {
case 0:
data->set.proxy_transfer_mode = FALSE;
break;
case 1:
data->set.proxy_transfer_mode = TRUE;
break;
default:
/* reserve other values for future use */
result = CURLE_FAILED_INIT;
break;
}
break;
#endif
case CURLOPT_WRITEHEADER:
/*
* Custom pointer to pass the header write callback function
*/
data->set.writeheader = (void *)va_arg(param, void *);
break;
case CURLOPT_ERRORBUFFER:
/*
* Error buffer provided by the caller to get the human readable
* error string in.
*/
data->set.errorbuffer = va_arg(param, char *);
break;
case CURLOPT_FILE:
/*
* FILE pointer to write to or include in the data write callback
*/
data->set.out = va_arg(param, FILE *);
break;
case CURLOPT_FTPPORT:
/*
* Use FTP PORT, this also specifies which IP address to use
*/
result = setstropt(&data->set.str[STRING_FTPPORT],
va_arg(param, char *));
data->set.ftp_use_port = (bool)(NULL != data->set.str[STRING_FTPPORT]);
break;
case CURLOPT_FTP_USE_EPRT:
data->set.ftp_use_eprt = (bool)(0 != va_arg(param, long));
break;
case CURLOPT_FTP_USE_EPSV:
data->set.ftp_use_epsv = (bool)(0 != va_arg(param, long));
break;
case CURLOPT_FTP_SSL_CCC:
data->set.ftp_ccc = (curl_ftpccc)va_arg(param, long);
break;
case CURLOPT_FTP_SKIP_PASV_IP:
/*
* Enable or disable FTP_SKIP_PASV_IP, which will disable/enable the
* bypass of the IP address in PASV responses.
*/
data->set.ftp_skip_ip = (bool)(0 != va_arg(param, long));
break;
case CURLOPT_INFILE:
/*
* FILE pointer to read the file to be uploaded from. Or possibly
* used as argument to the read callback.
*/
data->set.in = va_arg(param, FILE *);
break;
case CURLOPT_INFILESIZE:
/*
* If known, this should inform curl about the file size of the
* to-be-uploaded file.
*/
data->set.infilesize = va_arg(param, long);
break;
case CURLOPT_INFILESIZE_LARGE:
/*
* If known, this should inform curl about the file size of the
* to-be-uploaded file.
*/
data->set.infilesize = va_arg(param, curl_off_t);
break;
case CURLOPT_LOW_SPEED_LIMIT:
/*
* The low speed limit that if transfers are below this for
* CURLOPT_LOW_SPEED_TIME, the transfer is aborted.
*/
data->set.low_speed_limit=va_arg(param, long);
break;
case CURLOPT_MAX_SEND_SPEED_LARGE:
/*
* When transfer uploads are faster then CURLOPT_MAX_SEND_SPEED_LARGE
* bytes per second the transfer is throttled..
*/
data->set.max_send_speed=va_arg(param, curl_off_t);
break;
case CURLOPT_MAX_RECV_SPEED_LARGE:
/*
* When receiving data faster than CURLOPT_MAX_RECV_SPEED_LARGE bytes per
* second the transfer is throttled..
*/
data->set.max_recv_speed=va_arg(param, curl_off_t);
break;
case CURLOPT_LOW_SPEED_TIME:
/*
* The low speed time that if transfers are below the set
* CURLOPT_LOW_SPEED_LIMIT during this time, the transfer is aborted.
*/
data->set.low_speed_time=va_arg(param, long);
break;
case CURLOPT_URL:
/*
* The URL to fetch.
*/
if(data->change.url_alloc) {
/* the already set URL is allocated, free it first! */
free(data->change.url);
data->change.url_alloc=FALSE;
}
result = setstropt(&data->set.str[STRING_SET_URL],
va_arg(param, char *));
data->change.url = data->set.str[STRING_SET_URL];
break;
case CURLOPT_PORT:
/*
* The port number to use when getting the URL
*/
data->set.use_port = va_arg(param, long);
break;
case CURLOPT_TIMEOUT:
/*
* The maximum time you allow curl to use for a single transfer
* operation.
*/
data->set.timeout = va_arg(param, long) * 1000L;
break;
case CURLOPT_TIMEOUT_MS:
data->set.timeout = va_arg(param, long);
break;
case CURLOPT_CONNECTTIMEOUT:
/*
* The maximum time you allow curl to use to connect.
*/
data->set.connecttimeout = va_arg(param, long) * 1000L;
break;
case CURLOPT_CONNECTTIMEOUT_MS:
data->set.connecttimeout = va_arg(param, long);
break;
case CURLOPT_USERPWD:
/*
* user:password to use in the operation
*/
result = setstropt_userpwd(va_arg(param, char *),
&data->set.str[STRING_USERNAME],
&data->set.str[STRING_PASSWORD]);
break;
case CURLOPT_USERNAME:
/*
* authentication user name to use in the operation
*/
result = setstropt(&data->set.str[STRING_USERNAME],
va_arg(param, char *));
break;
case CURLOPT_PASSWORD:
/*
* authentication password to use in the operation
*/
result = setstropt(&data->set.str[STRING_PASSWORD],
va_arg(param, char *));
break;
case CURLOPT_POSTQUOTE:
/*
* List of RAW FTP commands to use after a transfer
*/
data->set.postquote = va_arg(param, struct curl_slist *);
break;
case CURLOPT_PREQUOTE:
/*
* List of RAW FTP commands to use prior to RETR (Wesley Laxton)
*/
data->set.prequote = va_arg(param, struct curl_slist *);
break;
case CURLOPT_QUOTE:
/*
* List of RAW FTP commands to use before a transfer
*/
data->set.quote = va_arg(param, struct curl_slist *);
break;
case CURLOPT_PROGRESSFUNCTION:
/*
* Progress callback function
*/
data->set.fprogress = va_arg(param, curl_progress_callback);
if(data->set.fprogress)
data->progress.callback = TRUE; /* no longer internal */
else
data->progress.callback = FALSE; /* NULL enforces internal */
break;
case CURLOPT_PROGRESSDATA:
/*
* Custom client data to pass to the progress callback
*/
data->set.progress_client = va_arg(param, void *);
break;
#ifndef CURL_DISABLE_PROXY
case CURLOPT_PROXYUSERPWD:
/*
* user:password needed to use the proxy
*/
result = setstropt_userpwd(va_arg(param, char *),
&data->set.str[STRING_PROXYUSERNAME],
&data->set.str[STRING_PROXYPASSWORD]);
break;
case CURLOPT_PROXYUSERNAME:
/*
* authentication user name to use in the operation
*/
result = setstropt(&data->set.str[STRING_PROXYUSERNAME],
va_arg(param, char *));
break;
case CURLOPT_PROXYPASSWORD:
/*
* authentication password to use in the operation
*/
result = setstropt(&data->set.str[STRING_PROXYPASSWORD],
va_arg(param, char *));
break;
#endif
case CURLOPT_RANGE:
/*
* What range of the file you want to transfer
*/
result = setstropt(&data->set.str[STRING_SET_RANGE],
va_arg(param, char *));
break;
case CURLOPT_RESUME_FROM:
/*
* Resume transfer at the give file position
*/
data->set.set_resume_from = va_arg(param, long);
break;
case CURLOPT_RESUME_FROM_LARGE:
/*
* Resume transfer at the give file position
*/
data->set.set_resume_from = va_arg(param, curl_off_t);
break;
case CURLOPT_DEBUGFUNCTION:
/*
* stderr write callback.
*/
data->set.fdebug = va_arg(param, curl_debug_callback);
/*
* if the callback provided is NULL, it'll use the default callback
*/
break;
case CURLOPT_DEBUGDATA:
/*
* Set to a void * that should receive all error writes. This
* defaults to CURLOPT_STDERR for normal operations.
*/
data->set.debugdata = va_arg(param, void *);
break;
case CURLOPT_STDERR:
/*
* Set to a FILE * that should receive all error writes. This
* defaults to stderr for normal operations.
*/
data->set.err = va_arg(param, FILE *);
if(!data->set.err)
data->set.err = stderr;
break;
case CURLOPT_HEADERFUNCTION:
/*
* Set header write callback
*/
data->set.fwrite_header = va_arg(param, curl_write_callback);
break;
case CURLOPT_WRITEFUNCTION:
/*
* Set data write callback
*/
data->set.fwrite_func = va_arg(param, curl_write_callback);
if(!data->set.fwrite_func)
/* When set to NULL, reset to our internal default function */
data->set.fwrite_func = (curl_write_callback)fwrite;
break;
case CURLOPT_READFUNCTION:
/*
* Read data callback
*/
data->set.fread_func = va_arg(param, curl_read_callback);
if(!data->set.fread_func)
/* When set to NULL, reset to our internal default function */
data->set.fread_func = (curl_read_callback)fread;
break;
case CURLOPT_SEEKFUNCTION:
/*
* Seek callback. Might be NULL.
*/
data->set.seek_func = va_arg(param, curl_seek_callback);
break;
case CURLOPT_SEEKDATA:
/*
* Seek control callback. Might be NULL.
*/
data->set.seek_client = va_arg(param, void *);
break;
case CURLOPT_CONV_FROM_NETWORK_FUNCTION:
/*
* "Convert from network encoding" callback
*/
data->set.convfromnetwork = va_arg(param, curl_conv_callback);
break;
case CURLOPT_CONV_TO_NETWORK_FUNCTION:
/*
* "Convert to network encoding" callback
*/
data->set.convtonetwork = va_arg(param, curl_conv_callback);
break;
case CURLOPT_CONV_FROM_UTF8_FUNCTION:
/*
* "Convert from UTF-8 encoding" callback
*/
data->set.convfromutf8 = va_arg(param, curl_conv_callback);
break;
case CURLOPT_IOCTLFUNCTION:
/*
* I/O control callback. Might be NULL.
*/
data->set.ioctl_func = va_arg(param, curl_ioctl_callback);
break;
case CURLOPT_IOCTLDATA:
/*
* I/O control data pointer. Might be NULL.
*/
data->set.ioctl_client = va_arg(param, void *);
break;
case CURLOPT_SSLCERT:
/*
* String that holds file name of the SSL certificate to use
*/
result = setstropt(&data->set.str[STRING_CERT],
va_arg(param, char *));
break;
case CURLOPT_SSLCERTTYPE:
/*
* String that holds file type of the SSL certificate to use
*/
result = setstropt(&data->set.str[STRING_CERT_TYPE],
va_arg(param, char *));
break;
case CURLOPT_SSLKEY:
/*
* String that holds file name of the SSL certificate to use
*/
result = setstropt(&data->set.str[STRING_KEY],
va_arg(param, char *));
break;
case CURLOPT_SSLKEYTYPE:
/*
* String that holds file type of the SSL certificate to use
*/
result = setstropt(&data->set.str[STRING_KEY_TYPE],
va_arg(param, char *));
break;
case CURLOPT_KEYPASSWD:
/*
* String that holds the SSL or SSH private key password.
*/
result = setstropt(&data->set.str[STRING_KEY_PASSWD],
va_arg(param, char *));
break;
case CURLOPT_SSLENGINE:
/*
* String that holds the SSL crypto engine.
*/
argptr = va_arg(param, char *);
if(argptr && argptr[0])
result = Curl_ssl_set_engine(data, argptr);
break;
case CURLOPT_SSLENGINE_DEFAULT:
/*
* flag to set engine as default.
*/
result = Curl_ssl_set_engine_default(data);
break;
case CURLOPT_CRLF:
/*
* Kludgy option to enable CRLF conversions. Subject for removal.
*/
data->set.crlf = (bool)(0 != va_arg(param, long));
break;
case CURLOPT_INTERFACE:
/*
* Set what interface or address/hostname to bind the socket to when
* performing an operation and thus what from-IP your connection will use.
*/
result = setstropt(&data->set.str[STRING_DEVICE],
va_arg(param, char *));
break;
case CURLOPT_LOCALPORT:
/*
* Set what local port to bind the socket to when performing an operation.
*/
data->set.localport = (unsigned short) va_arg(param, long);
break;
case CURLOPT_LOCALPORTRANGE:
/*
* Set number of local ports to try, starting with CURLOPT_LOCALPORT.
*/
data->set.localportrange = (int) va_arg(param, long);
break;
case CURLOPT_KRBLEVEL:
/*
* A string that defines the kerberos security level.
*/
result = setstropt(&data->set.str[STRING_KRB_LEVEL],
va_arg(param, char *));
data->set.krb = (bool)(NULL != data->set.str[STRING_KRB_LEVEL]);
break;
case CURLOPT_SSL_VERIFYPEER:
/*
* Enable peer SSL verifying.
*/
data->set.ssl.verifypeer = va_arg(param, long);
break;
case CURLOPT_SSL_VERIFYHOST:
/*
* Enable verification of the CN contained in the peer certificate
*/
data->set.ssl.verifyhost = va_arg(param, long);
break;
#ifdef USE_SSLEAY
/* since these two options are only possible to use on an OpenSSL-
powered libcurl we #ifdef them on this condition so that libcurls
built against other SSL libs will return a proper error when trying
to set this option! */
case CURLOPT_SSL_CTX_FUNCTION:
/*
* Set a SSL_CTX callback
*/
data->set.ssl.fsslctx = va_arg(param, curl_ssl_ctx_callback);
break;
case CURLOPT_SSL_CTX_DATA:
/*
* Set a SSL_CTX callback parameter pointer
*/
data->set.ssl.fsslctxp = va_arg(param, void *);
break;
case CURLOPT_CERTINFO:
data->set.ssl.certinfo = (bool)(0 != va_arg(param, long));
break;
#endif
case CURLOPT_CAINFO:
/*
* Set CA info for SSL connection. Specify file name of the CA certificate
*/
result = setstropt(&data->set.str[STRING_SSL_CAFILE],
va_arg(param, char *));
break;
case CURLOPT_CAPATH:
/*
* Set CA path info for SSL connection. Specify directory name of the CA
* certificates which have been prepared using openssl c_rehash utility.
*/
/* This does not work on windows. */
result = setstropt(&data->set.str[STRING_SSL_CAPATH],
va_arg(param, char *));
break;
case CURLOPT_CRLFILE:
/*
* Set CRL file info for SSL connection. Specify file name of the CRL
* to check certificates revocation
*/
result = setstropt(&data->set.str[STRING_SSL_CRLFILE],
va_arg(param, char *));
break;
case CURLOPT_ISSUERCERT:
/*
* Set Issuer certificate file
* to check certificates issuer
*/
result = setstropt(&data->set.str[STRING_SSL_ISSUERCERT],
va_arg(param, char *));
break;
case CURLOPT_TELNETOPTIONS:
/*
* Set a linked list of telnet options
*/
data->set.telnet_options = va_arg(param, struct curl_slist *);
break;
case CURLOPT_BUFFERSIZE:
/*
* The application kindly asks for a differently sized receive buffer.
* If it seems reasonable, we'll use it.
*/
data->set.buffer_size = va_arg(param, long);
if((data->set.buffer_size> (BUFSIZE -1 )) ||
(data->set.buffer_size < 1))
data->set.buffer_size = 0; /* huge internal default */
break;
case CURLOPT_NOSIGNAL:
/*
* The application asks not to set any signal() or alarm() handlers,
* even when using a timeout.
*/
data->set.no_signal = (bool)(0 != va_arg(param, long));
break;
case CURLOPT_SHARE:
{
struct Curl_share *set;
set = va_arg(param, struct Curl_share *);
/* disconnect from old share, if any */
if(data->share) {
Curl_share_lock(data, CURL_LOCK_DATA_SHARE, CURL_LOCK_ACCESS_SINGLE);
if(data->dns.hostcachetype == HCACHE_SHARED) {
data->dns.hostcache = NULL;
data->dns.hostcachetype = HCACHE_NONE;
}
if(data->share->cookies == data->cookies)
data->cookies = NULL;
data->share->dirty--;
Curl_share_unlock(data, CURL_LOCK_DATA_SHARE);
data->share = NULL;
}
/* use new share if it set */
data->share = set;
if(data->share) {
Curl_share_lock(data, CURL_LOCK_DATA_SHARE, CURL_LOCK_ACCESS_SINGLE);
data->share->dirty++;
if(data->share->hostcache) {
/* use shared host cache, first free the private one if any */
if(data->dns.hostcachetype == HCACHE_PRIVATE)
Curl_hash_destroy(data->dns.hostcache);
data->dns.hostcache = data->share->hostcache;
data->dns.hostcachetype = HCACHE_SHARED;
}
#if !defined(CURL_DISABLE_HTTP) && !defined(CURL_DISABLE_COOKIES)
if(data->share->cookies) {
/* use shared cookie list, first free own one if any */
if(data->cookies)
Curl_cookie_cleanup(data->cookies);
/* enable cookies since we now use a share that uses cookies! */
data->cookies = data->share->cookies;
}
#endif /* CURL_DISABLE_HTTP */
Curl_share_unlock(data, CURL_LOCK_DATA_SHARE);
}
/* check for host cache not needed,
* it will be done by curl_easy_perform */
}
break;
case CURLOPT_PRIVATE:
/*
* Set private data pointer.
*/
data->set.private_data = va_arg(param, void *);
break;
case CURLOPT_MAXFILESIZE:
/*
* Set the maximum size of a file to download.
*/
data->set.max_filesize = va_arg(param, long);
break;
case CURLOPT_USE_SSL:
/*
* Make transfers attempt to use SSL/TLS.
*/
data->set.ftp_ssl = (curl_usessl)va_arg(param, long);
break;
case CURLOPT_FTPSSLAUTH:
/*
* Set a specific auth for FTP-SSL transfers.
*/
data->set.ftpsslauth = (curl_ftpauth)va_arg(param, long);
break;
case CURLOPT_IPRESOLVE:
data->set.ip_version = va_arg(param, long);
break;
case CURLOPT_MAXFILESIZE_LARGE:
/*
* Set the maximum size of a file to download.
*/
data->set.max_filesize = va_arg(param, curl_off_t);
break;
case CURLOPT_TCP_NODELAY:
/*
* Enable or disable TCP_NODELAY, which will disable/enable the Nagle
* algorithm
*/
data->set.tcp_nodelay = (bool)(0 != va_arg(param, long));
break;
case CURLOPT_FTP_ACCOUNT:
result = setstropt(&data->set.str[STRING_FTP_ACCOUNT],
va_arg(param, char *));
break;
case CURLOPT_IGNORE_CONTENT_LENGTH:
data->set.ignorecl = (bool)(0 != va_arg(param, long));
break;
case CURLOPT_CONNECT_ONLY:
/*
* No data transfer, set up connection and let application use the socket
*/
data->set.connect_only = (bool)(0 != va_arg(param, long));
break;
case CURLOPT_FTP_ALTERNATIVE_TO_USER:
result = setstropt(&data->set.str[STRING_FTP_ALTERNATIVE_TO_USER],
va_arg(param, char *));
break;
case CURLOPT_SOCKOPTFUNCTION:
/*
* socket callback function: called after socket() but before connect()
*/
data->set.fsockopt = va_arg(param, curl_sockopt_callback);
break;
case CURLOPT_SOCKOPTDATA:
/*
* socket callback data pointer. Might be NULL.
*/
data->set.sockopt_client = va_arg(param, void *);
break;
case CURLOPT_OPENSOCKETFUNCTION:
/*
* open/create socket callback function: called instead of socket(),
* before connect()
*/
data->set.fopensocket = va_arg(param, curl_opensocket_callback);
break;
case CURLOPT_OPENSOCKETDATA:
/*
* socket callback data pointer. Might be NULL.
*/
data->set.opensocket_client = va_arg(param, void *);
break;
case CURLOPT_SSL_SESSIONID_CACHE:
data->set.ssl.sessionid = (bool)(0 != va_arg(param, long));
break;
case CURLOPT_SSH_AUTH_TYPES:
data->set.ssh_auth_types = va_arg(param, long);
break;
case CURLOPT_SSH_PUBLIC_KEYFILE:
/*
* Use this file instead of the $HOME/.ssh/id_dsa.pub file
*/
result = setstropt(&data->set.str[STRING_SSH_PUBLIC_KEY],
va_arg(param, char *));
break;
case CURLOPT_SSH_PRIVATE_KEYFILE:
/*
* Use this file instead of the $HOME/.ssh/id_dsa file
*/
result = setstropt(&data->set.str[STRING_SSH_PRIVATE_KEY],
va_arg(param, char *));
break;
case CURLOPT_SSH_HOST_PUBLIC_KEY_MD5:
/*
* Option to allow for the MD5 of the host public key to be checked
* for validation purposes.
*/
result = setstropt(&data->set.str[STRING_SSH_HOST_PUBLIC_KEY_MD5],
va_arg(param, char *));
break;
case CURLOPT_HTTP_TRANSFER_DECODING:
/*
* disable libcurl transfer encoding is used
*/
data->set.http_te_skip = (bool)(0 == va_arg(param, long));
break;
case CURLOPT_HTTP_CONTENT_DECODING:
/*
* raw data passed to the application when content encoding is used
*/
data->set.http_ce_skip = (bool)(0 == va_arg(param, long));
break;
case CURLOPT_NEW_FILE_PERMS:
/*
* Uses these permissions instead of 0644
*/
data->set.new_file_perms = va_arg(param, long);
break;
case CURLOPT_NEW_DIRECTORY_PERMS:
/*
* Uses these permissions instead of 0755
*/
data->set.new_directory_perms = va_arg(param, long);
break;
case CURLOPT_ADDRESS_SCOPE:
/*
* We always get longs when passed plain numericals, but for this value we
* know that an unsigned int will always hold the value so we blindly
* typecast to this type
*/
data->set.scope = (unsigned int) va_arg(param, long);
break;
default:
/* unknown tag and its companion, just ignore: */
result = CURLE_FAILED_INIT; /* correct this */
break;
}
return result;
}
static void conn_free(struct connectdata *conn)
{
if(!conn)
return;
/* close possibly still open sockets */
if(CURL_SOCKET_BAD != conn->sock[SECONDARYSOCKET])
sclose(conn->sock[SECONDARYSOCKET]);
if(CURL_SOCKET_BAD != conn->sock[FIRSTSOCKET])
sclose(conn->sock[FIRSTSOCKET]);
Curl_safefree(conn->user);
Curl_safefree(conn->passwd);
Curl_safefree(conn->proxyuser);
Curl_safefree(conn->proxypasswd);
Curl_safefree(conn->allocptr.proxyuserpwd);
Curl_safefree(conn->allocptr.uagent);
Curl_safefree(conn->allocptr.userpwd);
Curl_safefree(conn->allocptr.accept_encoding);
Curl_safefree(conn->allocptr.rangeline);
Curl_safefree(conn->allocptr.ref);
Curl_safefree(conn->allocptr.host);
Curl_safefree(conn->allocptr.cookiehost);
Curl_safefree(conn->trailer);
Curl_safefree(conn->host.rawalloc); /* host name buffer */
Curl_safefree(conn->proxy.rawalloc); /* proxy name buffer */
Curl_safefree(conn->master_buffer);
Curl_llist_destroy(conn->send_pipe, NULL);
Curl_llist_destroy(conn->recv_pipe, NULL);
Curl_llist_destroy(conn->pend_pipe, NULL);
/* possible left-overs from the async name resolvers */
#if defined(USE_ARES)
Curl_safefree(conn->async.hostname);
Curl_safefree(conn->async.os_specific);
#elif defined(CURLRES_THREADED)
Curl_destroy_thread_data(&conn->async);
#endif
Curl_ssl_close(conn, FIRSTSOCKET);
Curl_ssl_close(conn, SECONDARYSOCKET);
Curl_free_ssl_config(&conn->ssl_config);
free(conn); /* free all the connection oriented data */
}
CURLcode Curl_disconnect(struct connectdata *conn)
{
struct SessionHandle *data;
if(!conn)
return CURLE_OK; /* this is closed and fine already */
data = conn->data;
if(!data) {
DEBUGF(infof(data, "DISCONNECT without easy handle, ignoring\n"));
return CURLE_OK;
}
#if defined(CURLDEBUG) && defined(AGGRESIVE_TEST)
/* scan for DNS cache entries still marked as in use */
Curl_hash_apply(data->hostcache,
NULL, Curl_scan_cache_used);
#endif
Curl_expire(data, 0); /* shut off timers */
Curl_hostcache_prune(data); /* kill old DNS cache entries */
{
int has_host_ntlm = (conn->ntlm.state != NTLMSTATE_NONE);
int has_proxy_ntlm = (conn->proxyntlm.state != NTLMSTATE_NONE);
/* Authentication data is a mix of connection-related and sessionhandle-
related stuff. NTLM is connection-related so when we close the shop
we shall forget. */
if (has_host_ntlm) {
data->state.authhost.done = FALSE;
data->state.authhost.picked =
data->state.authhost.want;
}
if (has_proxy_ntlm) {
data->state.authproxy.done = FALSE;
data->state.authproxy.picked =
data->state.authproxy.want;
}
if (has_host_ntlm || has_proxy_ntlm) {
data->state.authproblem = FALSE;
Curl_ntlm_cleanup(conn);
}
}
/* Cleanup possible redirect junk */
if(data->req.newurl) {
free(data->req.newurl);
data->req.newurl = NULL;
}
if(conn->handler->disconnect)
/* This is set if protocol-specific cleanups should be made */
conn->handler->disconnect(conn);
if(-1 != conn->connectindex) {
/* unlink ourselves! */
infof(data, "Closing connection #%ld\n", conn->connectindex);
if(data->state.connc)
/* only clear the table entry if we still know in which cache we
used to be in */
data->state.connc->connects[conn->connectindex] = NULL;
}
#ifdef USE_LIBIDN
if(conn->host.encalloc)
idn_free(conn->host.encalloc); /* encoded host name buffer, must be freed
with idn_free() since this was allocated
by libidn */
if(conn->proxy.encalloc)
idn_free(conn->proxy.encalloc); /* encoded proxy name buffer, must be
freed with idn_free() since this was
allocated by libidn */
#endif
Curl_ssl_close(conn, FIRSTSOCKET);
/* Indicate to all handles on the pipe that we're dead */
if(Curl_isPipeliningEnabled(data)) {
signalPipeClose(conn->send_pipe);
signalPipeClose(conn->recv_pipe);
signalPipeClose(conn->pend_pipe);
}
conn_free(conn);
data->state.current_conn = NULL;
return CURLE_OK;
}
/*
* This function should return TRUE if the socket is to be assumed to
* be dead. Most commonly this happens when the server has closed the
* connection due to inactivity.
*/
static bool SocketIsDead(curl_socket_t sock)
{
int sval;
bool ret_val = TRUE;
sval = Curl_socket_ready(sock, CURL_SOCKET_BAD, 0);
if(sval == 0)
/* timeout */
ret_val = FALSE;
return ret_val;
}
static bool IsPipeliningPossible(const struct SessionHandle *handle)
{
if(handle->multi && Curl_multi_canPipeline(handle->multi) &&
(handle->set.httpreq == HTTPREQ_GET ||
handle->set.httpreq == HTTPREQ_HEAD) &&
handle->set.httpversion != CURL_HTTP_VERSION_1_0)
return TRUE;
return FALSE;
}
bool Curl_isPipeliningEnabled(const struct SessionHandle *handle)
{
if(handle->multi && Curl_multi_canPipeline(handle->multi))
return TRUE;
return FALSE;
}
CURLcode Curl_addHandleToPipeline(struct SessionHandle *data,
struct curl_llist *pipeline)
{
#ifdef CURLDEBUG
if(!IsPipeliningPossible(data)) {
/* when not pipelined, there MUST be no handle in the list already */
if(pipeline->head)
infof(data, "PIPE when no PIPE supposed!\n");
}
#endif
if(!Curl_llist_insert_next(pipeline, pipeline->tail, data))
return CURLE_OUT_OF_MEMORY;
return CURLE_OK;
}
int Curl_removeHandleFromPipeline(struct SessionHandle *handle,
struct curl_llist *pipeline)
{
struct curl_llist_element *curr;
curr = pipeline->head;
while(curr) {
if(curr->ptr == handle) {
Curl_llist_remove(pipeline, curr, NULL);
return 1; /* we removed a handle */
}
curr = curr->next;
}
return 0;
}
#if 0 /* this code is saved here as it is useful for debugging purposes */
static void Curl_printPipeline(struct curl_llist *pipeline)
{
struct curl_llist_element *curr;
curr = pipeline->head;
while(curr) {
struct SessionHandle *data = (struct SessionHandle *) curr->ptr;
infof(data, "Handle in pipeline: %s\n", data->state.path);
curr = curr->next;
}
}
#endif
static struct SessionHandle* gethandleathead(struct curl_llist *pipeline)
{
struct curl_llist_element *curr = pipeline->head;
if(curr) {
return (struct SessionHandle *) curr->ptr;
}
return NULL;
}
/* remove the specified connection from all (possible) pipelines and related
queues */
void Curl_getoff_all_pipelines(struct SessionHandle *data,
struct connectdata *conn)
{
bool recv_head = conn->readchannel_inuse &&
(gethandleathead(conn->recv_pipe) == data);
bool send_head = conn->writechannel_inuse &&
(gethandleathead(conn->send_pipe) == data);
if(Curl_removeHandleFromPipeline(data, conn->recv_pipe) && recv_head)
conn->readchannel_inuse = FALSE;
if(Curl_removeHandleFromPipeline(data, conn->send_pipe) && send_head)
conn->writechannel_inuse = FALSE;
Curl_removeHandleFromPipeline(data, conn->pend_pipe);
}
static void signalPipeClose(struct curl_llist *pipeline)
{
struct curl_llist_element *curr;
if(!pipeline)
return;
curr = pipeline->head;
while(curr) {
struct curl_llist_element *next = curr->next;
struct SessionHandle *data = (struct SessionHandle *) curr->ptr;
#ifdef CURLDEBUG /* debug-only code */
if(data->magic != CURLEASY_MAGIC_NUMBER) {
/* MAJOR BADNESS */
infof(data, "signalPipeClose() found BAAD easy handle\n");
}
#endif
data->state.pipe_broke = TRUE;
Curl_multi_handlePipeBreak(data);
Curl_llist_remove(pipeline, curr, NULL);
curr = next;
}
}
/*
* Given one filled in connection struct (named needle), this function should
* detect if there already is one that has all the significant details
* exactly the same and thus should be used instead.
*
* If there is a match, this function returns TRUE - and has marked the
* connection as 'in-use'. It must later be called with ConnectionDone() to
* return back to 'idle' (unused) state.
*/
static bool
ConnectionExists(struct SessionHandle *data,
struct connectdata *needle,
struct connectdata **usethis)
{
long i;
struct connectdata *check;
bool canPipeline = IsPipeliningPossible(data);
for(i=0; i< data->state.connc->num; i++) {
bool match = FALSE;
size_t pipeLen = 0;
/*
* Note that if we use a HTTP proxy, we check connections to that
* proxy and not to the actual remote server.
*/
check = data->state.connc->connects[i];
if(!check)
/* NULL pointer means not filled-in entry */
continue;
pipeLen = check->send_pipe->size + check->recv_pipe->size;
if(check->connectindex == -1) {
check->connectindex = i; /* Set this appropriately since it might have
been set to -1 when the easy was removed
from the multi */
}
if(canPipeline) {
/* Make sure the pipe has only GET requests */
struct SessionHandle* sh = gethandleathead(check->send_pipe);
struct SessionHandle* rh = gethandleathead(check->recv_pipe);
if(sh) {
if(!IsPipeliningPossible(sh))
continue;
}
else if(rh) {
if(!IsPipeliningPossible(rh))
continue;
}
#ifdef CURLDEBUG
if(pipeLen > MAX_PIPELINE_LENGTH) {
infof(data, "BAD! Connection #%ld has too big pipeline!\n",
check->connectindex);
}
#endif
}
else {
if(pipeLen > 0) {
/* can only happen within multi handles, and means that another easy
handle is using this connection */
continue;
}
#ifdef CURLRES_ASYNCH
/* ip_addr_str[0] is NUL only if the resolving of the name hasn't
completed yet and until then we don't re-use this connection */
if(!check->ip_addr_str[0]) {
infof(data,
"Connection #%ld hasn't finished name resolve, can't reuse\n",
check->connectindex);
continue;
}
#endif
if((check->sock[FIRSTSOCKET] == CURL_SOCKET_BAD) || check->bits.close) {
/* Don't pick a connection that hasn't connected yet or that is going to
get closed. */
infof(data, "Connection #%ld isn't open enough, can't reuse\n",
check->connectindex);
#ifdef CURLDEBUG
if(check->recv_pipe->size > 0) {
infof(data, "BAD! Unconnected #%ld has a non-empty recv pipeline!\n",
check->connectindex);
}
#endif
continue;
}
}
if((needle->protocol&PROT_SSL) != (check->protocol&PROT_SSL))
/* don't do mixed SSL and non-SSL connections */
continue;
if(needle->bits.proxy != check->bits.proxy)
/* don't do mixed proxy and non-proxy connections */
continue;
if(!canPipeline && check->inuse)
/* this request can't be pipelined but the checked connection is already
in use so we skip it */
continue;
if(!needle->bits.httpproxy || needle->protocol&PROT_SSL ||
(needle->bits.httpproxy && check->bits.httpproxy &&
needle->bits.tunnel_proxy && check->bits.tunnel_proxy &&
Curl_raw_equal(needle->proxy.name, check->proxy.name) &&
(needle->port == check->port))) {
/* The requested connection does not use a HTTP proxy or it uses SSL or
it is a non-SSL protocol tunneled over the same http proxy name and
port number */
if(Curl_raw_equal(needle->protostr, check->protostr) &&
Curl_raw_equal(needle->host.name, check->host.name) &&
(needle->remote_port == check->remote_port) ) {
if(needle->protocol & PROT_SSL) {
/* This is SSL, verify that we're using the same
ssl options as well */
if(!Curl_ssl_config_matches(&needle->ssl_config,
&check->ssl_config)) {
DEBUGF(infof(data,
"Connection #%ld has different SSL parameters, "
"can't reuse\n",
check->connectindex));
continue;
}
else if(check->ssl[FIRSTSOCKET].state != ssl_connection_complete) {
DEBUGF(infof(data,
"Connection #%ld has not started ssl connect, "
"can't reuse\n",
check->connectindex));
continue;
}
}
if((needle->protocol & PROT_FTP) ||
((needle->protocol & PROT_HTTP) &&
(data->state.authhost.want==CURLAUTH_NTLM))) {
/* This is FTP or HTTP+NTLM, verify that we're using the same name
and password as well */
if(!strequal(needle->user, check->user) ||
!strequal(needle->passwd, check->passwd)) {
/* one of them was different */
continue;
}
}
match = TRUE;
}
}
else { /* The requested needle connection is using a proxy,
is the checked one using the same host, port and type? */
if(check->bits.proxy &&
(needle->proxytype == check->proxytype) &&
Curl_raw_equal(needle->proxy.name, check->proxy.name) &&
needle->port == check->port) {
/* This is the same proxy connection, use it! */
match = TRUE;
}
}
if(match) {
if(!pipeLen && !check->inuse) {
/* The check for a dead socket makes sense only if there are no
handles in pipeline and the connection isn't already marked in
use */
bool dead = SocketIsDead(check->sock[FIRSTSOCKET]);
if(dead) {
check->data = data;
infof(data, "Connection #%d seems to be dead!\n", i);
Curl_disconnect(check); /* disconnect resources */
data->state.connc->connects[i]=NULL; /* nothing here */
return FALSE;
}
}
check->inuse = TRUE; /* mark this as being in use so that no other
handle in a multi stack may nick it */
*usethis = check;
return TRUE; /* yes, we found one to use! */
}
}
return FALSE; /* no matching connecting exists */
}
/*
* This function frees/closes a connection in the connection cache. This
* should take the previously set policy into account when deciding which
* of the connections to kill.
*/
static long
ConnectionKillOne(struct SessionHandle *data)
{
long i;
struct connectdata *conn;
long highscore=-1;
long connindex=-1;
long score;
struct timeval now;
now = Curl_tvnow();
for(i=0; data->state.connc && (i< data->state.connc->num); i++) {
conn = data->state.connc->connects[i];
if(!conn || conn->inuse)
continue;
/* Set higher score for the age passed since the connection was used */
score = Curl_tvdiff(now, conn->now);
if(score > highscore) {
highscore = score;
connindex = i;
}
}
if(connindex >= 0) {
/* Set the connection's owner correctly */
conn = data->state.connc->connects[connindex];
conn->data = data;
/* the winner gets the honour of being disconnected */
(void)Curl_disconnect(conn);
/* clean the array entry */
data->state.connc->connects[connindex] = NULL;
}
return connindex; /* return the available index or -1 */
}
/* this connection can now be marked 'idle' */
static void
ConnectionDone(struct connectdata *conn)
{
conn->inuse = FALSE;
}
/*
* The given input connection struct pointer is to be stored. If the "cache"
* is already full, we must clean out the most suitable using the previously
* set policy.
*
* The given connection should be unique. That must've been checked prior to
* this call.
*/
static long
ConnectionStore(struct SessionHandle *data,
struct connectdata *conn)
{
long i;
for(i=0; i< data->state.connc->num; i++) {
if(!data->state.connc->connects[i])
break;
}
if(i == data->state.connc->num) {
/* there was no room available, kill one */
i = ConnectionKillOne(data);
if(-1 != i)
infof(data, "Connection (#%d) was killed to make room (holds %d)\n",
i, data->state.connc->num);
else
infof(data, "This connection did not fit in the connection cache\n");
}
conn->connectindex = i; /* Make the child know where the pointer to this
particular data is stored. But note that this -1
if this is not within the cache and this is
probably not checked for everywhere (yet). */
conn->inuse = TRUE;
if(-1 != i) {
/* Only do this if a true index was returned, if -1 was returned there
is no room in the cache for an unknown reason and we cannot store
this there.
TODO: make sure we really can work with more handles than positions in
the cache, or possibly we should (allow to automatically) resize the
connection cache when we add more easy handles to a multi handle!
*/
data->state.connc->connects[i] = conn; /* fill in this */
conn->data = data;
}
return i;
}
static CURLcode ConnectPlease(struct SessionHandle *data,
struct connectdata *conn,
struct Curl_dns_entry *hostaddr,
bool *connected)
{
CURLcode result;
Curl_addrinfo *addr;
#ifndef CURL_DISABLE_VERBOSE_STRINGS
char *hostname = conn->bits.proxy?conn->proxy.name:conn->host.name;
infof(data, "About to connect() to %s%s port %d (#%d)\n",
conn->bits.proxy?"proxy ":"",
hostname, conn->port, conn->connectindex);
#endif
/*************************************************************
* Connect to server/proxy
*************************************************************/
result= Curl_connecthost(conn,
hostaddr,
&conn->sock[FIRSTSOCKET],
&addr,
connected);
if(CURLE_OK == result) {
/* All is cool, then we store the current information */
conn->dns_entry = hostaddr;
conn->ip_addr = addr;
switch(data->set.proxytype) {
#ifndef CURL_DISABLE_PROXY
case CURLPROXY_SOCKS5:
case CURLPROXY_SOCKS5_HOSTNAME:
result = Curl_SOCKS5(conn->proxyuser, conn->proxypasswd,
conn->host.name, conn->remote_port,
FIRSTSOCKET, conn);
break;
case CURLPROXY_SOCKS4:
result = Curl_SOCKS4(conn->proxyuser, conn->host.name,
conn->remote_port, FIRSTSOCKET, conn, FALSE);
break;
case CURLPROXY_SOCKS4A:
result = Curl_SOCKS4(conn->proxyuser, conn->host.name,
conn->remote_port, FIRSTSOCKET, conn, TRUE);
break;
#endif /* CURL_DISABLE_PROXY */
case CURLPROXY_HTTP:
/* do nothing here. handled later. */
break;
default:
failf(data, "unknown proxytype option given");
result = CURLE_COULDNT_CONNECT;
break;
} /* switch proxytype */
} /* if result is ok */
if(result)
*connected = FALSE; /* mark it as not connected */
return result;
}
/*
* verboseconnect() displays verbose information after a connect
*/
#ifndef CURL_DISABLE_VERBOSE_STRINGS
static void verboseconnect(struct connectdata *conn)
{
infof(conn->data, "Connected to %s (%s) port %d (#%d)\n",
conn->bits.proxy ? conn->proxy.dispname : conn->host.dispname,
conn->ip_addr_str, conn->port, conn->connectindex);
}
#endif
int Curl_protocol_getsock(struct connectdata *conn,
curl_socket_t *socks,
int numsocks)
{
if(conn->handler->proto_getsock)
return conn->handler->proto_getsock(conn, socks, numsocks);
return GETSOCK_BLANK;
}
int Curl_doing_getsock(struct connectdata *conn,
curl_socket_t *socks,
int numsocks)
{
if(conn && conn->handler->doing_getsock)
return conn->handler->doing_getsock(conn, socks, numsocks);
return GETSOCK_BLANK;
}
/*
* We are doing protocol-specific connecting and this is being called over and
* over from the multi interface until the connection phase is done on
* protocol layer.
*/
CURLcode Curl_protocol_connecting(struct connectdata *conn,
bool *done)
{
CURLcode result=CURLE_OK;
if(conn && conn->handler->connecting) {
*done = FALSE;
result = conn->handler->connecting(conn, done);
}
else
*done = TRUE;
return result;
}
/*
* We are DOING this is being called over and over from the multi interface
* until the DOING phase is done on protocol layer.
*/
CURLcode Curl_protocol_doing(struct connectdata *conn, bool *done)
{
CURLcode result=CURLE_OK;
if(conn && conn->handler->doing) {
*done = FALSE;
result = conn->handler->doing(conn, done);
}
else
*done = TRUE;
return result;
}
/*
* We have discovered that the TCP connection has been successful, we can now
* proceed with some action.
*
*/
CURLcode Curl_protocol_connect(struct connectdata *conn,
bool *protocol_done)
{
CURLcode result=CURLE_OK;
struct SessionHandle *data = conn->data;
*protocol_done = FALSE;
if(conn->bits.tcpconnect && conn->bits.protoconnstart) {
/* We already are connected, get back. This may happen when the connect
worked fine in the first call, like when we connect to a local server
or proxy. Note that we don't know if the protocol is actually done.
Unless this protocol doesn't have any protocol-connect callback, as
then we know we're done. */
if(!conn->handler->connecting)
*protocol_done = TRUE;
return CURLE_OK;
}
if(!conn->bits.tcpconnect) {
Curl_pgrsTime(data, TIMER_CONNECT); /* connect done */
if(data->set.verbose)
verboseconnect(conn);
}
if(!conn->bits.protoconnstart) {
if(conn->handler->connect_it) {
/* is there a protocol-specific connect() procedure? */
/* Set start time here for timeout purposes in the connect procedure, it
is later set again for the progress meter purpose */
conn->now = Curl_tvnow();
/* Call the protocol-specific connect function */
result = conn->handler->connect_it(conn, protocol_done);
}
else
*protocol_done = TRUE;
/* it has started, possibly even completed but that knowledge isn't stored
in this bit! */
if(!result)
conn->bits.protoconnstart = TRUE;
}
return result; /* pass back status */
}
/*
* Helpers for IDNA convertions.
*/
#ifdef USE_LIBIDN
static bool is_ASCII_name(const char *hostname)
{
const unsigned char *ch = (const unsigned char*)hostname;
while(*ch) {
if(*ch++ & 0x80)
return FALSE;
}
return TRUE;
}
/*
* Check if characters in hostname is allowed in Top Level Domain.
*/
static bool tld_check_name(struct SessionHandle *data,
const char *ace_hostname)
{
size_t err_pos;
char *uc_name = NULL;
int rc;
#ifndef CURL_DISABLE_VERBOSE_STRINGS
const char *tld_errmsg = "<no msg>";
#else
(void)data;
#endif
/* Convert (and downcase) ACE-name back into locale's character set */
rc = idna_to_unicode_lzlz(ace_hostname, &uc_name, 0);
if(rc != IDNA_SUCCESS)
return (FALSE);
rc = tld_check_lz(uc_name, &err_pos, NULL);
#ifndef CURL_DISABLE_VERBOSE_STRINGS
#ifdef HAVE_TLD_STRERROR
if(rc != TLD_SUCCESS)
tld_errmsg = tld_strerror((Tld_rc)rc);
#endif
if(rc == TLD_INVALID)
infof(data, "WARNING: %s; pos %u = `%c'/0x%02X\n",
tld_errmsg, err_pos, uc_name[err_pos],
uc_name[err_pos] & 255);
else if(rc != TLD_SUCCESS)
infof(data, "WARNING: TLD check for %s failed; %s\n",
uc_name, tld_errmsg);
#endif /* CURL_DISABLE_VERBOSE_STRINGS */
if(uc_name)
idn_free(uc_name);
return (bool)(rc == TLD_SUCCESS);
}
#endif
/*
* Perform any necessary IDN conversion of hostname
*/
static void fix_hostname(struct SessionHandle *data,
struct connectdata *conn, struct hostname *host)
{
#ifndef USE_LIBIDN
(void)data;
(void)conn;
#elif defined(CURL_DISABLE_VERBOSE_STRINGS)
(void)conn;
#endif
/* set the name we use to display the host name */
host->dispname = host->name;
#ifdef USE_LIBIDN
/*************************************************************
* Check name for non-ASCII and convert hostname to ACE form.
*************************************************************/
if(!is_ASCII_name(host->name) &&
stringprep_check_version(LIBIDN_REQUIRED_VERSION)) {
char *ace_hostname = NULL;
int rc = idna_to_ascii_lz(host->name, &ace_hostname, 0);
infof (data, "Input domain encoded as `%s'\n",
stringprep_locale_charset ());
if(rc != IDNA_SUCCESS)
infof(data, "Failed to convert %s to ACE; %s\n",
host->name, Curl_idn_strerror(conn,rc));
else {
/* tld_check_name() displays a warning if the host name contains
"illegal" characters for this TLD */
(void)tld_check_name(data, ace_hostname);
host->encalloc = ace_hostname;
/* change the name pointer to point to the encoded hostname */
host->name = host->encalloc;
}
}
#endif
}
/*
* Allocate and initialize a new connectdata object.
*/
static struct connectdata *allocate_conn(void)
{
struct connectdata *conn;
conn = calloc(1, sizeof(struct connectdata));
if(!conn)
return NULL;
conn->handler = &Curl_handler_dummy; /* Be sure we have a handler defined
already from start to avoid NULL
situations and checks */
/* and we setup a few fields in case we end up actually using this struct */
conn->sock[FIRSTSOCKET] = CURL_SOCKET_BAD; /* no file descriptor */
conn->sock[SECONDARYSOCKET] = CURL_SOCKET_BAD; /* no file descriptor */
conn->connectindex = -1; /* no index */
/* Default protocol-independent behavior doesn't support persistent
connections, so we set this to force-close. Protocols that support
this need to set this to FALSE in their "curl_do" functions. */
conn->bits.close = TRUE;
/* Store creation time to help future close decision making */
conn->created = Curl_tvnow();
return conn;
}
/*
* Parse URL and fill in the relevant members of the connection struct.
*/
static CURLcode ParseURLAndFillConnection(struct SessionHandle *data,
struct connectdata *conn)
{
char *at;
char *tmp;
char *path = data->state.path;
int rc;
/*************************************************************
* Parse the URL.
*
* We need to parse the url even when using the proxy, because we will need
* the hostname and port in case we are trying to SSL connect through the
* proxy -- and we don't know if we will need to use SSL until we parse the
* url ...
************************************************************/
if((2 == sscanf(data->change.url, "%15[^:]:%[^\n]",
conn->protostr,
path)) && Curl_raw_equal(conn->protostr, "file")) {
if(path[0] == '/' && path[1] == '/') {
/* Allow omitted hostname (e.g. file:/<path>). This is not strictly
* speaking a valid file: URL by RFC 1738, but treating file:/<path> as
* file://localhost/<path> is similar to how other schemes treat missing
* hostnames. See RFC 1808. */
/* This cannot be done with strcpy() in a portable manner, since the
memory areas overlap! */
memmove(path, path + 2, strlen(path + 2)+1);
}
/*
* we deal with file://<host>/<path> differently since it supports no
* hostname other than "localhost" and "127.0.0.1", which is unique among
* the URL protocols specified in RFC 1738
*/
if(path[0] != '/') {
/* the URL included a host name, we ignore host names in file:// URLs
as the standards don't define what to do with them */
char *ptr=strchr(path, '/');
if(ptr) {
/* there was a slash present
RFC1738 (section 3.1, page 5) says:
The rest of the locator consists of data specific to the scheme,
and is known as the "url-path". It supplies the details of how the
specified resource can be accessed. Note that the "/" between the
host (or port) and the url-path is NOT part of the url-path.
As most agents use file://localhost/foo to get '/foo' although the
slash preceding foo is a separator and not a slash for the path,
a URL as file://localhost//foo must be valid as well, to refer to
the same file with an absolute path.
*/
if(ptr[1] && ('/' == ptr[1]))
/* if there was two slashes, we skip the first one as that is then
used truly as a separator */
ptr++;
/* This cannot be made with strcpy, as the memory chunks overlap! */
memmove(path, ptr, strlen(ptr)+1);
}
}
strcpy(conn->protostr, "file"); /* store protocol string lowercase */
}
else {
/* clear path */
path[0]=0;
if(2 > sscanf(data->change.url,
"%15[^\n:]://%[^\n/]%[^\n]",
conn->protostr,
conn->host.name, path)) {
/*
* The URL was badly formatted, let's try the browser-style _without_
* protocol specified like 'http://'.
*/
if(1 > (rc = sscanf(data->change.url, "%[^\n/]%[^\n]",
conn->host.name, path)) ) {
/*
* We couldn't even get this format.
* djgpp 2.04 has a sscanf() bug where 'conn->host.name' is
* assigned, but the return value is EOF!
*/
#if defined(__DJGPP__) && (DJGPP_MINOR == 4)
if (!(rc == -1 && *conn->host.name))
#endif
{
failf(data, "<url> malformed");
return CURLE_URL_MALFORMAT;
}
}
/*
* Since there was no protocol part specified, we guess what protocol it
* is based on the first letters of the server name.
*/
/* Note: if you add a new protocol, please update the list in
* lib/version.c too! */
if(checkprefix("FTP.", conn->host.name))
strcpy(conn->protostr, "ftp");
else if(checkprefix("DICT.", conn->host.name))
strcpy(conn->protostr, "DICT");
else if(checkprefix("LDAP.", conn->host.name))
strcpy(conn->protostr, "LDAP");
else {
strcpy(conn->protostr, "http");
}
conn->protocol |= PROT_MISSING; /* not given in URL */
}
}
/* We search for '?' in the host name (but only on the right side of a
* @-letter to allow ?-letters in username and password) to handle things
* like http://example.com?param= (notice the missing '/').
*/
at = strchr(conn->host.name, '@');
if(at)
tmp = strchr(at+1, '?');
else
tmp = strchr(conn->host.name, '?');
if(tmp) {
/* We must insert a slash before the '?'-letter in the URL. If the URL had
a slash after the '?', that is where the path currently begins and the
'?string' is still part of the host name.
We must move the trailing part from the host name and put it first in
the path. And have it all prefixed with a slash.
*/
size_t hostlen = strlen(tmp);
size_t pathlen = strlen(path);
/* move the existing path plus the zero byte forward, to make room for
the host-name part */
memmove(path+hostlen+1, path, pathlen+1);
/* now copy the trailing host part in front of the existing path */
memcpy(path+1, tmp, hostlen);
path[0]='/'; /* prepend the missing slash */
*tmp=0; /* now cut off the hostname at the ? */
}
else if(!path[0]) {
/* if there's no path set, use a single slash */
strcpy(path, "/");
}
/* If the URL is malformatted (missing a '/' after hostname before path) we
* insert a slash here. The only letter except '/' we accept to start a path
* is '?'.
*/
if(path[0] == '?') {
/* We need this function to deal with overlapping memory areas. We know
that the memory area 'path' points to is 'urllen' bytes big and that
is bigger than the path. Use +1 to move the zero byte too. */
memmove(&path[1], path, strlen(path)+1);
path[0] = '/';
}
if (conn->host.name[0] == '[') {
/* This looks like an IPv6 address literal. See if there is an address
scope. */
char *percent = strstr (conn->host.name, "%25");
if (percent) {
char *endp;
unsigned long scope = strtoul (percent + 3, &endp, 10);
if (*endp == ']') {
/* The address scope was well formed. Knock it out of the hostname. */
memmove(percent, endp, strlen(endp)+1);
if (!data->state.this_is_a_follow)
/* Don't honour a scope given in a Location: header */
conn->scope = (unsigned int)scope;
} else
infof(data, "Invalid IPv6 address format\n");
}
}
if (data->set.scope)
/* Override any scope that was set above. */
conn->scope = data->set.scope;
/*
* So if the URL was A://B/C,
* conn->protostr is A
* conn->host.name is B
* data->state.path is /C
*/
(void)rc;
return CURLE_OK;
}
static void llist_dtor(void *user, void *element)
{
(void)user;
(void)element;
/* Do nothing */
}
/*
* If we're doing a resumed transfer, we need to setup our stuff
* properly.
*/
static CURLcode setup_range(struct SessionHandle *data)
{
struct UrlState *s = &data->state;
s->resume_from = data->set.set_resume_from;
if(s->resume_from || data->set.str[STRING_SET_RANGE]) {
if(s->rangestringalloc)
free(s->range);
if(s->resume_from)
s->range = aprintf("%" FORMAT_OFF_TU "-", s->resume_from);
else
s->range = strdup(data->set.str[STRING_SET_RANGE]);
s->rangestringalloc = (bool)(s->range?TRUE:FALSE);
if(!s->range)
return CURLE_OUT_OF_MEMORY;
/* tell ourselves to fetch this range */
s->use_range = TRUE; /* enable range download */
}
else
s->use_range = FALSE; /* disable range download */
return CURLE_OK;
}
/***************************************************************
* Setup connection internals specific to the requested protocol
***************************************************************/
static CURLcode setup_connection_internals(struct SessionHandle *data,
struct connectdata *conn)
{
const struct Curl_handler * const * pp;
const struct Curl_handler * p;
CURLcode result;
conn->socktype = SOCK_STREAM; /* most of them are TCP streams */
/* Scan protocol handler table. */
for (pp = protocols; (p = *pp) != NULL; pp++)
if(Curl_raw_equal(p->scheme, conn->protostr)) {
/* Protocol found in table. Perform setup complement if some. */
conn->handler = p;
if(p->setup_connection) {
result = (*p->setup_connection)(conn);
if(result != CURLE_OK)
return result;
p = conn->handler; /* May have changed. */
}
conn->port = p->defport;
conn->remote_port = (unsigned short)p->defport;
conn->protocol |= p->protocol;
return CURLE_OK;
}
/* The protocol was not found in the table, but we don't have to assign it
to anything since it is already assigned to a dummy-struct in the
create_conn() function when the connectdata struct is allocated. */
failf(data, "Protocol %s not supported or disabled in " LIBCURL_NAME,
conn->protostr);
return CURLE_UNSUPPORTED_PROTOCOL;
}
#ifndef CURL_DISABLE_PROXY
/****************************************************************
* Detect what (if any) proxy to use. Remember that this selects a host
* name and is not limited to HTTP proxies only.
* The returned pointer must be freed by the caller (unless NULL)
****************************************************************/
static char *detect_proxy(struct connectdata *conn)
{
char *proxy = NULL;
#ifndef CURL_DISABLE_HTTP
/* If proxy was not specified, we check for default proxy environment
* variables, to enable i.e Lynx compliance:
*
* http_proxy=http://some.server.dom:port/
* https_proxy=http://some.server.dom:port/
* ftp_proxy=http://some.server.dom:port/
* no_proxy=domain1.dom,host.domain2.dom
* (a comma-separated list of hosts which should
* not be proxied, or an asterisk to override
* all proxy variables)
* all_proxy=http://some.server.dom:port/
* (seems to exist for the CERN www lib. Probably
* the first to check for.)
*
* For compatibility, the all-uppercase versions of these variables are
* checked if the lowercase versions don't exist.
*/
char *no_proxy=NULL;
char *no_proxy_tok_buf;
char proxy_env[128];
no_proxy=curl_getenv("no_proxy");
if(!no_proxy)
no_proxy=curl_getenv("NO_PROXY");
if(!no_proxy || !Curl_raw_equal("*", no_proxy)) {
/* NO_PROXY wasn't specified or it wasn't just an asterisk */
char *nope;
nope=no_proxy?strtok_r(no_proxy, ", ", &no_proxy_tok_buf):NULL;
while(nope) {
size_t namelen;
char *endptr = strchr(conn->host.name, ':');
if(endptr)
namelen=endptr-conn->host.name;
else
namelen=strlen(conn->host.name);
if(strlen(nope) <= namelen) {
char *checkn=
conn->host.name + namelen - strlen(nope);
if(checkprefix(nope, checkn)) {
/* no proxy for this host! */
break;
}
}
nope=strtok_r(NULL, ", ", &no_proxy_tok_buf);
}
if(!nope) {
/* It was not listed as without proxy */
char *protop = conn->protostr;
char *envp = proxy_env;
char *prox;
/* Now, build <protocol>_proxy and check for such a one to use */
while(*protop)
*envp++ = (char)tolower((int)*protop++);
/* append _proxy */
strcpy(envp, "_proxy");
/* read the protocol proxy: */
prox=curl_getenv(proxy_env);
/*
* We don't try the uppercase version of HTTP_PROXY because of
* security reasons:
*
* When curl is used in a webserver application
* environment (cgi or php), this environment variable can
* be controlled by the web server user by setting the
* http header 'Proxy:' to some value.
*
* This can cause 'internal' http/ftp requests to be
* arbitrarily redirected by any external attacker.
*/
if(!prox && !Curl_raw_equal("http_proxy", proxy_env)) {
/* There was no lowercase variable, try the uppercase version: */
Curl_strntoupper(proxy_env, proxy_env, sizeof(proxy_env));
prox=curl_getenv(proxy_env);
}
if(prox && *prox) { /* don't count "" strings */
proxy = prox; /* use this */
}
else {
proxy = curl_getenv("all_proxy"); /* default proxy to use */
if(!proxy)
proxy=curl_getenv("ALL_PROXY");
}
if(proxy && *proxy) {
long bits = conn->protocol & (PROT_HTTPS|PROT_SSL|PROT_MISSING);
if(conn->proxytype == CURLPROXY_HTTP) {
/* force this connection's protocol to become HTTP */
conn->protocol = PROT_HTTP | bits;
conn->bits.proxy = conn->bits.httpproxy = TRUE;
}
}
} /* if(!nope) - it wasn't specified non-proxy */
} /* NO_PROXY wasn't specified or '*' */
if(no_proxy)
free(no_proxy);
#else /* !CURL_DISABLE_HTTP */
(void)conn;
#endif /* CURL_DISABLE_HTTP */
return proxy;
}
/*
* If this is supposed to use a proxy, we need to figure out the proxy
* host name, so that we can re-use an existing connection
* that may exist registered to the same proxy host.
* proxy will be freed before this function returns.
*/
static CURLcode parse_proxy(struct SessionHandle *data,
struct connectdata *conn, char *proxy)
{
char *prox_portno;
char *endofprot;
/* We use 'proxyptr' to point to the proxy name from now on... */
char *proxyptr=proxy;
char *portptr;
char *atsign;
/* We do the proxy host string parsing here. We want the host name and the
* port name. Accept a protocol:// prefix, even though it should just be
* ignored.
*/
/* Skip the protocol part if present */
endofprot=strstr(proxyptr, "://");
if(endofprot)
proxyptr = endofprot+3;
/* Is there a username and password given in this proxy url? */
atsign = strchr(proxyptr, '@');
if(atsign) {
char proxyuser[MAX_CURL_USER_LENGTH];
char proxypasswd[MAX_CURL_PASSWORD_LENGTH];
proxypasswd[0] = 0;
if(1 <= sscanf(proxyptr,
"%" MAX_CURL_USER_LENGTH_TXT"[^:@]:"
"%" MAX_CURL_PASSWORD_LENGTH_TXT "[^@]",
proxyuser, proxypasswd)) {
CURLcode res = CURLE_OK;
/* found user and password, rip them out. note that we are
unescaping them, as there is otherwise no way to have a
username or password with reserved characters like ':' in
them. */
Curl_safefree(conn->proxyuser);
conn->proxyuser = curl_easy_unescape(data, proxyuser, 0, NULL);
if(!conn->proxyuser)
res = CURLE_OUT_OF_MEMORY;
else {
Curl_safefree(conn->proxypasswd);
conn->proxypasswd = curl_easy_unescape(data, proxypasswd, 0, NULL);
if(!conn->proxypasswd)
res = CURLE_OUT_OF_MEMORY;
}
if(CURLE_OK == res) {
conn->bits.proxy_user_passwd = TRUE; /* enable it */
atsign = strdup(atsign+1); /* the right side of the @-letter */
if(atsign) {
free(proxy); /* free the former proxy string */
proxy = proxyptr = atsign; /* now use this instead */
}
else
res = CURLE_OUT_OF_MEMORY;
}
if(res) {
free(proxy); /* free the allocated proxy string */
return res;
}
}
}
/* start scanning for port number at this point */
portptr = proxyptr;
/* detect and extract RFC2732-style IPv6-addresses */
if(*proxyptr == '[') {
char *ptr = ++proxyptr; /* advance beyond the initial bracket */
while(*ptr && (ISXDIGIT(*ptr) || (*ptr == ':') || (*ptr == '%') || (*ptr == '.')))
ptr++;
if(*ptr == ']') {
/* yeps, it ended nicely with a bracket as well */
*ptr++ = 0;
} else
infof(data, "Invalid IPv6 address format\n");
portptr = ptr;
/* Note that if this didn't end with a bracket, we still advanced the
* proxyptr first, but I can't see anything wrong with that as no host
* name nor a numeric can legally start with a bracket.
*/
}
/* Get port number off proxy.server.com:1080 */
prox_portno = strchr(portptr, ':');
if(prox_portno) {
*prox_portno = 0x0; /* cut off number from host name */
prox_portno ++;
/* now set the local port number */
conn->port = atoi(prox_portno);
}
else {
/* without a port number after the host name, some people seem to use
a slash so we strip everything from the first slash */
atsign = strchr(proxyptr, '/');
if(atsign)
*atsign = 0x0; /* cut off path part from host name */
if(data->set.proxyport)
/* None given in the proxy string, then get the default one if it is
given */
conn->port = data->set.proxyport;
}
/* now, clone the cleaned proxy host name */
conn->proxy.rawalloc = strdup(proxyptr);
conn->proxy.name = conn->proxy.rawalloc;
free(proxy);
if(!conn->proxy.rawalloc)
return CURLE_OUT_OF_MEMORY;
return CURLE_OK;
}
/*
* Extract the user and password from the authentication string
*/
static CURLcode parse_proxy_auth(struct SessionHandle *data,
struct connectdata *conn)
{
char proxyuser[MAX_CURL_USER_LENGTH]="";
char proxypasswd[MAX_CURL_PASSWORD_LENGTH]="";
if(data->set.str[STRING_PROXYUSERNAME] != NULL) {
strncpy(proxyuser, data->set.str[STRING_PROXYUSERNAME], MAX_CURL_USER_LENGTH);
proxyuser[MAX_CURL_USER_LENGTH-1] = '\0'; /*To be on safe side*/
}
if(data->set.str[STRING_PROXYPASSWORD] != NULL) {
strncpy(proxypasswd, data->set.str[STRING_PROXYPASSWORD],
MAX_CURL_PASSWORD_LENGTH);
proxypasswd[MAX_CURL_PASSWORD_LENGTH-1] = '\0'; /*To be on safe side*/
}
conn->proxyuser = curl_easy_unescape(data, proxyuser, 0, NULL);
if(!conn->proxyuser)
return CURLE_OUT_OF_MEMORY;
conn->proxypasswd = curl_easy_unescape(data, proxypasswd, 0, NULL);
if(!conn->proxypasswd)
return CURLE_OUT_OF_MEMORY;
return CURLE_OK;
}
#endif /* CURL_DISABLE_PROXY */
/*
*
* Parse a user name and password in the URL and strip it out of the host name
*
* Inputs: data->set.use_netrc (CURLOPT_NETRC)
* conn->host.name
*
* Outputs: (almost :- all currently undefined)
* conn->bits.user_passwd - non-zero if non-default passwords exist
* user - non-zero length if defined
* passwd - ditto
* conn->host.name - remove user name and password
*/
static CURLcode parse_url_userpass(struct SessionHandle *data,
struct connectdata *conn,
char *user, char *passwd)
{
/* At this point, we're hoping all the other special cases have
* been taken care of, so conn->host.name is at most
* [user[:password]]@]hostname
*
* We need somewhere to put the embedded details, so do that first.
*/
user[0] =0; /* to make everything well-defined */
passwd[0]=0;
if(conn->protocol & (PROT_FTP|PROT_HTTP|PROT_SCP|PROT_SFTP)) {
/* This is a FTP, HTTP, SCP or SFTP URL, we will now try to extract the
* possible user+password pair in a string like:
* ftp://user:password@ftp.my.site:8021/README */
char *ptr=strchr(conn->host.name, '@');
char *userpass = conn->host.name;
if(ptr != NULL) {
/* there's a user+password given here, to the left of the @ */
conn->host.name = ++ptr;
/* So the hostname is sane. Only bother interpreting the
* results if we could care. It could still be wasted
* work because it might be overtaken by the programmatically
* set user/passwd, but doing that first adds more cases here :-(
*/
if(data->set.use_netrc != CURL_NETRC_REQUIRED) {
/* We could use the one in the URL */
conn->bits.user_passwd = 1; /* enable user+password */
if(*userpass != ':') {
/* the name is given, get user+password */
sscanf(userpass, "%" MAX_CURL_USER_LENGTH_TXT "[^:@]:"
"%" MAX_CURL_PASSWORD_LENGTH_TXT "[^@]",
user, passwd);
}
else
/* no name given, get the password only */
sscanf(userpass, ":%" MAX_CURL_PASSWORD_LENGTH_TXT "[^@]", passwd);
if(user[0]) {
char *newname=curl_easy_unescape(data, user, 0, NULL);
if(!newname)
return CURLE_OUT_OF_MEMORY;
if(strlen(newname) < MAX_CURL_USER_LENGTH)
strcpy(user, newname);
/* if the new name is longer than accepted, then just use
the unconverted name, it'll be wrong but what the heck */
free(newname);
}
if(passwd[0]) {
/* we have a password found in the URL, decode it! */
char *newpasswd=curl_easy_unescape(data, passwd, 0, NULL);
if(!newpasswd)
return CURLE_OUT_OF_MEMORY;
if(strlen(newpasswd) < MAX_CURL_PASSWORD_LENGTH)
strcpy(passwd, newpasswd);
free(newpasswd);
}
}
}
}
return CURLE_OK;
}
/*************************************************************
* Figure out the remote port number and fix it in the URL
*
* No matter if we use a proxy or not, we have to figure out the remote
* port number of various reasons.
*
* To be able to detect port number flawlessly, we must not confuse them
* IPv6-specified addresses in the [0::1] style. (RFC2732)
*
* The conn->host.name is currently [user:passwd@]host[:port] where host
* could be a hostname, IPv4 address or IPv6 address.
*
* The port number embedded in the URL is replaced, if necessary.
*************************************************************/
static CURLcode parse_remote_port(struct SessionHandle *data,
struct connectdata *conn)
{
char *portptr;
char endbracket;
/* Note that at this point, the IPv6 address cannot contain any scope
suffix as that has already been removed in the ParseURLAndFillConnection()
function */
if((1 == sscanf(conn->host.name, "[%*45[0123456789abcdefABCDEF:.]%c",
&endbracket)) &&
(']' == endbracket)) {
/* this is a RFC2732-style specified IP-address */
conn->bits.ipv6_ip = TRUE;
conn->host.name++; /* skip over the starting bracket */
portptr = strchr(conn->host.name, ']');
*portptr++ = 0; /* zero terminate, killing the bracket */
if(':' != *portptr)
portptr = NULL; /* no port number available */
}
else
portptr = strrchr(conn->host.name, ':');
if(data->set.use_port && data->state.allow_port) {
/* if set, we use this and ignore the port possibly given in the URL */
conn->remote_port = (unsigned short)data->set.use_port;
if(portptr)
*portptr = '\0'; /* cut off the name there anyway - if there was a port
number - since the port number is to be ignored! */
if(conn->bits.httpproxy) {
/* we need to create new URL with the new port number */
char *url;
bool isftp = (bool)(Curl_raw_equal("ftp", conn->protostr) ||
Curl_raw_equal("ftps", conn->protostr));
/*
* This synthesized URL isn't always right--suffixes like ;type=A
* are stripped off. It would be better to work directly from the
* original URL and simply replace the port part of it.
*/
url = aprintf("%s://%s%s%s:%d%s%s", conn->protostr,
conn->bits.ipv6_ip?"[":"", conn->host.name,
conn->bits.ipv6_ip?"]":"", conn->remote_port,
isftp?"/":"", data->state.path);
if(!url)
return CURLE_OUT_OF_MEMORY;
if(data->change.url_alloc)
free(data->change.url);
data->change.url = url;
data->change.url_alloc = TRUE;
}
}
else if(portptr) {
/* no CURLOPT_PORT given, extract the one from the URL */
char *rest;
unsigned long port;
port=strtoul(portptr+1, &rest, 10); /* Port number must be decimal */
if(rest != (portptr+1) && *rest == '\0') {
/* The colon really did have only digits after it,
* so it is either a port number or a mistake */
if(port > 0xffff) { /* Single unix standard says port numbers are
* 16 bits long */
failf(data, "Port number too large: %lu", port);
return CURLE_URL_MALFORMAT;
}
*portptr = '\0'; /* cut off the name there */
conn->remote_port = (unsigned short)port;
}
}
return CURLE_OK;
}
/*
* Override a user name and password from the URL with that in the
* CURLOPT_USERPWD option or a .netrc file, if applicable.
*/
static void override_userpass(struct SessionHandle *data,
struct connectdata *conn,
char *user, char *passwd)
{
if(data->set.str[STRING_USERNAME] != NULL) {
strncpy(user, data->set.str[STRING_USERNAME], MAX_CURL_USER_LENGTH);
user[MAX_CURL_USER_LENGTH-1] = '\0'; /*To be on safe side*/
}
if(data->set.str[STRING_PASSWORD] != NULL) {
strncpy(passwd, data->set.str[STRING_PASSWORD], MAX_CURL_PASSWORD_LENGTH);
passwd[MAX_CURL_PASSWORD_LENGTH-1] = '\0'; /*To be on safe side*/
}
conn->bits.netrc = FALSE;
if(data->set.use_netrc != CURL_NETRC_IGNORED) {
if(Curl_parsenetrc(conn->host.name,
user, passwd,
data->set.str[STRING_NETRC_FILE])) {
infof(data, "Couldn't find host %s in the "
DOT_CHAR "netrc file; using defaults\n",
conn->host.name);
}
else {
/* set bits.netrc TRUE to remember that we got the name from a .netrc
file, so that it is safe to use even if we followed a Location: to a
different host or similar. */
conn->bits.netrc = TRUE;
conn->bits.user_passwd = 1; /* enable user+password */
}
}
}
/*
* Set password so it's available in the connection.
*/
static CURLcode set_userpass(struct connectdata *conn,
const char *user, const char *passwd)
{
/* If our protocol needs a password and we have none, use the defaults */
if( (conn->protocol & PROT_FTP) &&
!conn->bits.user_passwd) {
conn->user = strdup(CURL_DEFAULT_USER);
conn->passwd = strdup(CURL_DEFAULT_PASSWORD);
/* This is the default password, so DON'T set conn->bits.user_passwd */
}
else {
/* store user + password, zero-length if not set */
conn->user = strdup(user);
conn->passwd = strdup(passwd);
}
if(!conn->user || !conn->passwd)
return CURLE_OUT_OF_MEMORY;
return CURLE_OK;
}
/*************************************************************
* Resolve the address of the server or proxy
*************************************************************/
static CURLcode resolve_server(struct SessionHandle *data,
struct connectdata *conn,
struct Curl_dns_entry **addr,
bool *async)
{
CURLcode result=CURLE_OK;
long shortest = 0; /* default to no timeout */
/*************************************************************
* Set timeout if that is being used
*************************************************************/
if(data->set.timeout || data->set.connecttimeout) {
/* We set the timeout on the name resolving phase first, separately from
* the download/upload part to allow a maximum time on everything. This is
* a signal-based timeout, why it won't work and shouldn't be used in
* multi-threaded environments. */
shortest = data->set.timeout; /* default to this timeout value */
if(shortest && data->set.connecttimeout &&
(data->set.connecttimeout < shortest))
/* if both are set, pick the shortest */
shortest = data->set.connecttimeout;
else if(!shortest)
/* if timeout is not set, use the connect timeout */
shortest = data->set.connecttimeout;
/* We can expect the conn->created time to be "now", as that was just
recently set in the beginning of this function and nothing slow
has been done since then until now. */
}
/*************************************************************
* Resolve the name of the server or proxy
*************************************************************/
if(conn->bits.reuse) {
/* re-used connection, no resolving is necessary */
*addr = NULL;
/* we'll need to clear conn->dns_entry later in Curl_disconnect() */
if(conn->bits.proxy)
fix_hostname(data, conn, &conn->host);
}
else {
/* this is a fresh connect */
int rc;
struct Curl_dns_entry *hostaddr;
/* set a pointer to the hostname we display */
fix_hostname(data, conn, &conn->host);
if(!conn->proxy.name || !*conn->proxy.name) {
/* If not connecting via a proxy, extract the port from the URL, if it is
* there, thus overriding any defaults that might have been set above. */
conn->port = conn->remote_port; /* it is the same port */
/* Resolve target host right on */
rc = Curl_resolv_timeout(conn, conn->host.name, (int)conn->port,
&hostaddr, shortest);
if(rc == CURLRESOLV_PENDING)
*async = TRUE;
else if (rc == CURLRESOLV_TIMEDOUT)
result = CURLE_OPERATION_TIMEDOUT;
else if(!hostaddr) {
failf(data, "Couldn't resolve host '%s'", conn->host.dispname);
result = CURLE_COULDNT_RESOLVE_HOST;
/* don't return yet, we need to clean up the timeout first */
}
}
else {
/* This is a proxy that hasn't been resolved yet. */
/* IDN-fix the proxy name */
fix_hostname(data, conn, &conn->proxy);
/* resolve proxy */
rc = Curl_resolv_timeout(conn, conn->proxy.name, (int)conn->port,
&hostaddr, shortest);
if(rc == CURLRESOLV_PENDING)
*async = TRUE;
else if (rc == CURLRESOLV_TIMEDOUT)
result = CURLE_OPERATION_TIMEDOUT;
else if(!hostaddr) {
failf(data, "Couldn't resolve proxy '%s'", conn->proxy.dispname);
result = CURLE_COULDNT_RESOLVE_PROXY;
/* don't return yet, we need to clean up the timeout first */
}
}
*addr = hostaddr;
}
return result;
}
/*
* Cleanup the connection just allocated before we can move along and use the
* previously existing one. All relevant data is copied over and old_conn is
* ready for freeing once this function returns.
*/
static void reuse_conn(struct connectdata *old_conn,
struct connectdata *conn)
{
if(old_conn->proxy.rawalloc)
free(old_conn->proxy.rawalloc);
/* free the SSL config struct from this connection struct as this was
allocated in vain and is targeted for destruction */
Curl_free_ssl_config(&old_conn->ssl_config);
conn->data = old_conn->data;
/* get the user+password information from the old_conn struct since it may
* be new for this request even when we re-use an existing connection */
conn->bits.user_passwd = old_conn->bits.user_passwd;
if(conn->bits.user_passwd) {
/* use the new user name and password though */
Curl_safefree(conn->user);
Curl_safefree(conn->passwd);
conn->user = old_conn->user;
conn->passwd = old_conn->passwd;
old_conn->user = NULL;
old_conn->passwd = NULL;
}
conn->bits.proxy_user_passwd = old_conn->bits.proxy_user_passwd;
if(conn->bits.proxy_user_passwd) {
/* use the new proxy user name and proxy password though */
Curl_safefree(conn->proxyuser);
Curl_safefree(conn->proxypasswd);
conn->proxyuser = old_conn->proxyuser;
conn->proxypasswd = old_conn->proxypasswd;
old_conn->proxyuser = NULL;
old_conn->proxypasswd = NULL;
}
/* host can change, when doing keepalive with a proxy ! */
if(conn->bits.proxy) {
free(conn->host.rawalloc);
conn->host=old_conn->host;
}
else
free(old_conn->host.rawalloc); /* free the newly allocated name buffer */
/* re-use init */
conn->bits.reuse = TRUE; /* yes, we're re-using here */
Curl_safefree(old_conn->user);
Curl_safefree(old_conn->passwd);
Curl_safefree(old_conn->proxyuser);
Curl_safefree(old_conn->proxypasswd);
Curl_llist_destroy(old_conn->send_pipe, NULL);
Curl_llist_destroy(old_conn->recv_pipe, NULL);
Curl_llist_destroy(old_conn->pend_pipe, NULL);
Curl_safefree(old_conn->master_buffer);
}
/**
* create_conn() sets up a new connectdata struct, or re-uses an already
* existing one, and resolves host name.
*
* if this function returns CURLE_OK and *async is set to TRUE, the resolve
* response will be coming asynchronously. If *async is FALSE, the name is
* already resolved.
*
* @param data The sessionhandle pointer
* @param in_connect is set to the next connection data pointer
* @param addr is set to the new dns entry for this connection. If this
* connection is re-used it will be NULL.
* @param async is set TRUE/FALSE depending on the nature of this lookup
* @return CURLcode
* @see setup_conn()
*
* *NOTE* this function assigns the conn->data pointer!
*/
static CURLcode create_conn(struct SessionHandle *data,
struct connectdata **in_connect,
struct Curl_dns_entry **addr,
bool *async)
{
CURLcode result=CURLE_OK;
struct connectdata *conn;
struct connectdata *conn_temp = NULL;
size_t urllen;
char user[MAX_CURL_USER_LENGTH];
char passwd[MAX_CURL_PASSWORD_LENGTH];
bool reuse;
char *proxy = NULL;
*addr = NULL; /* nothing yet */
*async = FALSE;
/*************************************************************
* Check input data
*************************************************************/
if(!data->change.url)
return CURLE_URL_MALFORMAT;
/* First, split up the current URL in parts so that we can use the
parts for checking against the already present connections. In order
to not have to modify everything at once, we allocate a temporary
connection data struct and fill in for comparison purposes. */
conn = allocate_conn();
/* We must set the return variable as soon as possible, so that our
parent can cleanup any possible allocs we may have done before
any failure */
*in_connect = conn;
if(!conn)
return CURLE_OUT_OF_MEMORY;
conn->data = data; /* Setup the association between this connection
and the SessionHandle */
conn->proxytype = data->set.proxytype; /* type */
conn->bits.proxy = (bool)(data->set.str[STRING_PROXY] &&
*data->set.str[STRING_PROXY]);
conn->bits.httpproxy = (bool)(conn->bits.proxy
&& (conn->proxytype == CURLPROXY_HTTP));
conn->bits.user_passwd = (bool)(NULL != data->set.str[STRING_USERNAME]);
conn->bits.proxy_user_passwd = (bool)(NULL != data->set.str[STRING_PROXYUSERNAME]);
conn->bits.tunnel_proxy = data->set.tunnel_thru_httpproxy;
conn->bits.ftp_use_epsv = data->set.ftp_use_epsv;
conn->bits.ftp_use_eprt = data->set.ftp_use_eprt;
if(data->multi && Curl_multi_canPipeline(data->multi) &&
!conn->master_buffer) {
/* Allocate master_buffer to be used for pipelining */
conn->master_buffer = calloc(BUFSIZE, sizeof (char));
if(!conn->master_buffer)
return CURLE_OUT_OF_MEMORY;
}
/* Initialize the pipeline lists */
conn->send_pipe = Curl_llist_alloc((curl_llist_dtor) llist_dtor);
conn->recv_pipe = Curl_llist_alloc((curl_llist_dtor) llist_dtor);
conn->pend_pipe = Curl_llist_alloc((curl_llist_dtor) llist_dtor);
if(!conn->send_pipe || !conn->recv_pipe || !conn->pend_pipe)
return CURLE_OUT_OF_MEMORY;
/* This initing continues below, see the comment "Continue connectdata
* initialization here" */
/***********************************************************
* We need to allocate memory to store the path in. We get the size of the
* full URL to be sure, and we need to make it at least 256 bytes since
* other parts of the code will rely on this fact
***********************************************************/
#define LEAST_PATH_ALLOC 256
urllen=strlen(data->change.url);
if(urllen < LEAST_PATH_ALLOC)
urllen=LEAST_PATH_ALLOC;
/*
* We malloc() the buffers below urllen+2 to make room for to possibilities:
* 1 - an extra terminating zero
* 2 - an extra slash (in case a syntax like "www.host.com?moo" is used)
*/
Curl_safefree(data->state.pathbuffer);
data->state.pathbuffer = malloc(urllen+2);
if(NULL == data->state.pathbuffer)
return CURLE_OUT_OF_MEMORY; /* really bad error */
data->state.path = data->state.pathbuffer;
conn->host.rawalloc = malloc(urllen+2);
if(NULL == conn->host.rawalloc)
return CURLE_OUT_OF_MEMORY;
conn->host.name = conn->host.rawalloc;
conn->host.name[0] = 0;
result = ParseURLAndFillConnection(data, conn);
if(result != CURLE_OK) {
return result;
}
#ifndef CURL_DISABLE_PROXY
/*************************************************************
* Extract the user and password from the authentication string
*************************************************************/
if(conn->bits.proxy_user_passwd) {
result = parse_proxy_auth(data, conn);
if(result != CURLE_OK)
return result;
}
/*************************************************************
* Detect what (if any) proxy to use
*************************************************************/
if(data->set.str[STRING_PROXY]) {
proxy = strdup(data->set.str[STRING_PROXY]);
/* if global proxy is set, this is it */
if(NULL == proxy) {
failf(data, "memory shortage");
return CURLE_OUT_OF_MEMORY;
}
}
if(!proxy)
proxy = detect_proxy(conn);
if(proxy && !*proxy) {
free(proxy); /* Don't bother with an empty proxy string */
proxy = NULL;
}
/* proxy must be freed later unless NULL */
#endif /* CURL_DISABLE_PROXY */
/*************************************************************
* No protocol part in URL was used, add it!
*************************************************************/
if(conn->protocol&PROT_MISSING) {
/* We're guessing prefixes here and if we're told to use a proxy or if
we're gonna follow a Location: later or... then we need the protocol
part added so that we have a valid URL. */
char *reurl;
reurl = aprintf("%s://%s", conn->protostr, data->change.url);
if(!reurl) {
Curl_safefree(proxy);
return CURLE_OUT_OF_MEMORY;
}
data->change.url = reurl;
data->change.url_alloc = TRUE; /* free this later */
conn->protocol &= ~PROT_MISSING; /* switch that one off again */
}
/*************************************************************
* Setup internals depending on protocol
*************************************************************/
result = setup_connection_internals(data, conn);
if(result != CURLE_OK) {
Curl_safefree(proxy);
return result;
}
#ifndef CURL_DISABLE_PROXY
/***********************************************************************
* If this is supposed to use a proxy, we need to figure out the proxy
* host name, so that we can re-use an existing connection
* that may exist registered to the same proxy host.
***********************************************************************/
if(proxy) {
result = parse_proxy(data, conn, proxy);
/* parse_proxy has freed the proxy string, so don't try to use it again */
proxy = NULL;
if(result != CURLE_OK)
return result;
}
#endif /* CURL_DISABLE_PROXY */
/***********************************************************************
* file: is a special case in that it doesn't need a network connection
***********************************************************************/
#ifndef CURL_DISABLE_FILE
if(conn->protocol & PROT_FILE) {
bool done;
/* this is supposed to be the connect function so we better at least check
that the file is present here! */
DEBUGASSERT(conn->handler->connect_it);
result = conn->handler->connect_it(conn, &done);
/* Setup a "faked" transfer that'll do nothing */
if(CURLE_OK == result) {
conn->data = data;
conn->bits.tcpconnect = TRUE; /* we are "connected */
ConnectionStore(data, conn);
/*
* Setup whatever necessary for a resumed transfer
*/
result = setup_range(data);
if(result) {
DEBUGASSERT(conn->handler->done);
/* we ignore the return code for the protocol-specific DONE */
(void)conn->handler->done(conn, result, FALSE);
return result;
}
result = Curl_setup_transfer(conn, -1, -1, FALSE,
NULL, /* no download */
-1, NULL); /* no upload */
}
return result;
}
#endif
/*************************************************************
* If the protocol is using SSL and HTTP proxy is used, we set
* the tunnel_proxy bit.
*************************************************************/
if((conn->protocol&PROT_SSL) && conn->bits.httpproxy)
conn->bits.tunnel_proxy = TRUE;
/*************************************************************
* Parse a user name and password in the URL and strip it out
* of the host name
*************************************************************/
result = parse_url_userpass(data, conn, user, passwd);
if(result != CURLE_OK)
return result;
/*************************************************************
* Figure out the remote port number and fix it in the URL
*************************************************************/
result = parse_remote_port(data, conn);
if(result != CURLE_OK)
return result;
/*************************************************************
* Check for an overridden user name and password, then set it
* for use
*************************************************************/
override_userpass(data, conn, user, passwd);
result = set_userpass(conn, user, passwd);
if(result != CURLE_OK)
return result;
/*************************************************************
* Check the current list of connections to see if we can
* re-use an already existing one or if we have to create a
* new one.
*************************************************************/
/* Get a cloned copy of the SSL config situation stored in the
connection struct. But to get this going nicely, we must first make
sure that the strings in the master copy are pointing to the correct
strings in the session handle strings array!
Keep in mind that the pointers in the master copy are pointing to strings
that will be freed as part of the SessionHandle struct, but all cloned
copies will be separately allocated.
*/
data->set.ssl.CApath = data->set.str[STRING_SSL_CAPATH];
data->set.ssl.CAfile = data->set.str[STRING_SSL_CAFILE];
data->set.ssl.CRLfile = data->set.str[STRING_SSL_CRLFILE];
data->set.ssl.issuercert = data->set.str[STRING_SSL_ISSUERCERT];
data->set.ssl.random_file = data->set.str[STRING_SSL_RANDOM_FILE];
data->set.ssl.egdsocket = data->set.str[STRING_SSL_EGDSOCKET];
data->set.ssl.cipher_list = data->set.str[STRING_SSL_CIPHER_LIST];
if(!Curl_clone_ssl_config(&data->set.ssl, &conn->ssl_config))
return CURLE_OUT_OF_MEMORY;
/* reuse_fresh is TRUE if we are told to use a new connection by force, but
we only acknowledge this option if this is not a re-used connection
already (which happens due to follow-location or during a HTTP
authentication phase). */
if(data->set.reuse_fresh && !data->state.this_is_a_follow)
reuse = FALSE;
else
reuse = ConnectionExists(data, conn, &conn_temp);
if(reuse) {
/*
* We already have a connection for this, we got the former connection
* in the conn_temp variable and thus we need to cleanup the one we
* just allocated before we can move along and use the previously
* existing one.
*/
reuse_conn(conn, conn_temp);
free(conn); /* we don't need this anymore */
conn = conn_temp;
*in_connect = conn;
infof(data, "Re-using existing connection! (#%ld) with host %s\n",
conn->connectindex,
conn->proxy.name?conn->proxy.dispname:conn->host.dispname);
/* copy this IP address to the common buffer for the easy handle so that
the address can actually survice the removal of this connection. strcpy
is safe since the target buffer is big enough to hold the largest
possible IP address */
strcpy(data->info.ip, conn->ip_addr_str);
}
else {
/*
* This is a brand new connection, so let's store it in the connection
* cache of ours!
*/
ConnectionStore(data, conn);
}
/*
* Setup whatever necessary for a resumed transfer
*/
result = setup_range(data);
if(result)
return result;
/* Continue connectdata initialization here. */
/*
* Inherit the proper values from the urldata struct AFTER we have arranged
* the persistent connection stuff
*/
conn->fread_func = data->set.fread_func;
conn->fread_in = data->set.in;
conn->seek_func = data->set.seek_func;
conn->seek_client = data->set.seek_client;
/*************************************************************
* Resolve the address of the server or proxy
*************************************************************/
result = resolve_server(data, conn, addr, async);
return result;
}
/* setup_conn() is called after the name resolve initiated in
* create_conn() is all done.
*
* NOTE: the argument 'hostaddr' is NULL when this function is called for a
* re-used connection.
*
* conn->data MUST already have been setup fine (in create_conn)
*/
static CURLcode setup_conn(struct connectdata *conn,
struct Curl_dns_entry *hostaddr,
bool *protocol_done)
{
CURLcode result=CURLE_OK;
struct SessionHandle *data = conn->data;
Curl_pgrsTime(data, TIMER_NAMELOOKUP);
if(conn->protocol & PROT_FILE) {
/* There's nothing in this function to setup if we're only doing
a file:// transfer */
*protocol_done = TRUE;
return result;
}
*protocol_done = FALSE; /* default to not done */
/* set proxy_connect_closed to false unconditionally already here since it
is used strictly to provide extra information to a parent function in the
case of proxy CONNECT failures and we must make sure we don't have it
lingering set from a previous invoke */
conn->bits.proxy_connect_closed = FALSE;
/*
* Set user-agent. Used for HTTP, but since we can attempt to tunnel
* basically anything through a http proxy we can't limit this based on
* protocol.
*/
if(data->set.str[STRING_USERAGENT]) {
Curl_safefree(conn->allocptr.uagent);
conn->allocptr.uagent =
aprintf("User-Agent: %s\r\n", data->set.str[STRING_USERAGENT]);
if(!conn->allocptr.uagent)
return CURLE_OUT_OF_MEMORY;
}
data->req.headerbytecount = 0;
#ifdef CURL_DO_LINEEND_CONV
data->state.crlf_conversions = 0; /* reset CRLF conversion counter */
#endif /* CURL_DO_LINEEND_CONV */
for(;;) {
/* loop for CURL_SERVER_CLOSED_CONNECTION */
if(CURL_SOCKET_BAD == conn->sock[FIRSTSOCKET]) {
bool connected = FALSE;
/* Connect only if not already connected!
*
* NOTE: hostaddr can be NULL when passed to this function, but that is
* only for the case where we re-use an existing connection and thus
* this code section will not be reached with hostaddr == NULL.
*/
result = ConnectPlease(data, conn, hostaddr, &connected);
if(connected) {
result = Curl_protocol_connect(conn, protocol_done);
if(CURLE_OK == result)
conn->bits.tcpconnect = TRUE;
}
else
conn->bits.tcpconnect = FALSE;
/* if the connection was closed by the server while exchanging
authentication informations, retry with the new set
authentication information */
if(conn->bits.proxy_connect_closed) {
/* reset the error buffer */
if(data->set.errorbuffer)
data->set.errorbuffer[0] = '\0';
data->state.errorbuf = FALSE;
continue;
}
if(CURLE_OK != result)
return result;
}
else {
Curl_pgrsTime(data, TIMER_CONNECT); /* we're connected already */
Curl_pgrsTime(data, TIMER_APPCONNECT); /* we're connected already */
conn->bits.tcpconnect = TRUE;
*protocol_done = TRUE;
if(data->set.verbose)
verboseconnect(conn);
}
/* Stop the loop now */
break;
}
conn->now = Curl_tvnow(); /* time this *after* the connect is done, we
set this here perhaps a second time */
#ifdef __EMX__
/*
* This check is quite a hack. We're calling _fsetmode to fix the problem
* with fwrite converting newline characters (you get mangled text files,
* and corrupted binary files when you download to stdout and redirect it to
* a file).
*/
if((data->set.out)->_handle == NULL) {
_fsetmode(stdout, "b");
}
#endif
return result;
}
CURLcode Curl_connect(struct SessionHandle *data,
struct connectdata **in_connect,
bool *asyncp,
bool *protocol_done)
{
CURLcode code;
struct Curl_dns_entry *dns;
*asyncp = FALSE; /* assume synchronous resolves by default */
/* call the stuff that needs to be called */
code = create_conn(data, in_connect, &dns, asyncp);
if(CURLE_OK == code) {
/* no error */
if((*in_connect)->send_pipe->size || (*in_connect)->recv_pipe->size)
/* pipelining */
*protocol_done = TRUE;
else {
if(dns || !*asyncp)
/* If an address is available it means that we already have the name
resolved, OR it isn't async. if this is a re-used connection 'dns'
will be NULL here. Continue connecting from here */
code = setup_conn(*in_connect, dns, protocol_done);
if(dns && code) {
/* We have the dns entry info already but failed to connect to the
* host and thus we must make sure to unlock the dns entry again
* before returning failure from here.
*/
Curl_resolv_unlock(data, dns);
}
}
}
if(code && *in_connect) {
/* We're not allowed to return failure with memory left allocated
in the connectdata struct, free those here */
Curl_disconnect(*in_connect); /* close the connection */
*in_connect = NULL; /* return a NULL */
}
return code;
}
/* Call this function after Curl_connect() has returned async=TRUE and
then a successful name resolve has been received.
Note: this function disconnects and frees the conn data in case of
resolve failure */
CURLcode Curl_async_resolved(struct connectdata *conn,
bool *protocol_done)
{
#if defined(USE_ARES) || defined(USE_THREADING_GETHOSTBYNAME) || \
defined(USE_THREADING_GETADDRINFO)
CURLcode code = setup_conn(conn, conn->async.dns, protocol_done);
if(code)
/* We're not allowed to return failure with memory left allocated
in the connectdata struct, free those here */
Curl_disconnect(conn); /* close the connection */
return code;
#else
(void)conn;
(void)protocol_done;
return CURLE_OK;
#endif
}
CURLcode Curl_done(struct connectdata **connp,
CURLcode status, /* an error if this is called after an
error was detected */
bool premature)
{
CURLcode result;
struct connectdata *conn;
struct SessionHandle *data;
DEBUGASSERT(*connp);
conn = *connp;
data = conn->data;
Curl_expire(data, 0); /* stop timer */
Curl_getoff_all_pipelines(data, conn);
if(conn->bits.done ||
(conn->send_pipe->size + conn->recv_pipe->size != 0 &&
!data->set.reuse_forbid &&
!conn->bits.close))
/* Stop if Curl_done() has already been called or pipeline
is not empty and we do not have to close connection. */
return CURLE_OK;
conn->bits.done = TRUE; /* called just now! */
/* Cleanup possible redirect junk */
if(data->req.newurl) {
free(data->req.newurl);
data->req.newurl = NULL;
}
if(data->req.location) {
free(data->req.location);
data->req.location = NULL;
}
if(conn->dns_entry) {
Curl_resolv_unlock(data, conn->dns_entry); /* done with this */
conn->dns_entry = NULL;
}
/* this calls the protocol-specific function pointer previously set */
if(conn->handler->done)
result = conn->handler->done(conn, status, premature);
else
result = CURLE_OK;
Curl_pgrsDone(conn); /* done with the operation */
/* if the transfer was completed in a paused state there can be buffered
data left to write and then kill */
if(data->state.tempwrite) {
free(data->state.tempwrite);
data->state.tempwrite = NULL;
}
/* for ares-using, make sure all possible outstanding requests are properly
cancelled before we proceed */
ares_cancel(data->state.areschannel);
/* if data->set.reuse_forbid is TRUE, it means the libcurl client has
forced us to close this no matter what we think.
if conn->bits.close is TRUE, it means that the connection should be
closed in spite of all our efforts to be nice, due to protocol
restrictions in our or the server's end
if premature is TRUE, it means this connection was said to be DONE before
the entire request operation is complete and thus we can't know in what
state it is for re-using, so we're forced to close it. In a perfect world
we can add code that keep track of if we really must close it here or not,
but currently we have no such detail knowledge.
*/
if(data->set.reuse_forbid || conn->bits.close || premature) {
CURLcode res2 = Curl_disconnect(conn); /* close the connection */
/* If we had an error already, make sure we return that one. But
if we got a new error, return that. */
if(!result && res2)
result = res2;
}
else {
ConnectionDone(conn); /* the connection is no longer in use */
/* remember the most recently used connection */
data->state.lastconnect = conn->connectindex;
infof(data, "Connection #%ld to host %s left intact\n",
conn->connectindex,
conn->bits.httpproxy?conn->proxy.dispname:conn->host.dispname);
}
*connp = NULL; /* to make the caller of this function better detect that
this was either closed or handed over to the connection
cache here, and therefore cannot be used from this point on
*/
return result;
}
/*
* do_init() inits the readwrite session. This is inited each time (in the DO
* function before the protocol-specific DO functions are invoked) for a
* transfer, sometimes multiple times on the same SessionHandle. Make sure
* nothing in here depends on stuff that are setup dynamically for the
* transfer.
*/
static CURLcode do_init(struct connectdata *conn)
{
struct SessionHandle *data = conn->data;
struct SingleRequest *k = &data->req;
conn->bits.done = FALSE; /* Curl_done() is not called yet */
conn->bits.do_more = FALSE; /* by default there's no curl_do_more() to use */
data->state.expect100header = FALSE;
/* NB: the content encoding software depends on this initialization */
Curl_easy_initHandleData(data);
k->start = Curl_tvnow(); /* start time */
k->now = k->start; /* current time is now */
k->header = TRUE; /* assume header */
k->bytecount = 0;
k->buf = data->state.buffer;
k->uploadbuf = data->state.uploadbuffer;
k->hbufp = data->state.headerbuff;
k->ignorebody=FALSE;
Curl_pgrsTime(data, TIMER_PRETRANSFER);
Curl_speedinit(data);
Curl_pgrsSetUploadCounter(data, 0);
Curl_pgrsSetDownloadCounter(data, 0);
return CURLE_OK;
}
/*
* do_complete is called when the DO actions are complete.
*
* We init chunking and trailer bits to their default values here immediately
* before receiving any header data for the current request in the pipeline.
*/
static void do_complete(struct connectdata *conn)
{
conn->data->req.chunk=FALSE;
conn->data->req.trailerhdrpresent=FALSE;
conn->data->req.maxfd = (conn->sockfd>conn->writesockfd?
conn->sockfd:conn->writesockfd)+1;
}
CURLcode Curl_do(struct connectdata **connp, bool *done)
{
CURLcode result=CURLE_OK;
struct connectdata *conn = *connp;
struct SessionHandle *data = conn->data;
/* setup and init stuff before DO starts, in preparing for the transfer */
do_init(conn);
if(conn->handler->do_it) {
/* generic protocol-specific function pointer set in curl_connect() */
result = conn->handler->do_it(conn, done);
/* This was formerly done in transfer.c, but we better do it here */
if((CURLE_SEND_ERROR == result) && conn->bits.reuse) {
/* This was a re-use of a connection and we got a write error in the
* DO-phase. Then we DISCONNECT this connection and have another attempt
* to CONNECT and then DO again! The retry cannot possibly find another
* connection to re-use, since we only keep one possible connection for
* each. */
infof(data, "Re-used connection seems dead, get a new one\n");
conn->bits.close = TRUE; /* enforce close of this connection */
result = Curl_done(&conn, result, FALSE); /* we are so done with this */
/* conn may no longer be a good pointer */
/*
* According to bug report #1330310. We need to check for
* CURLE_SEND_ERROR here as well. I figure this could happen when the
* request failed on a FTP connection and thus Curl_done() itself tried
* to use the connection (again). Slight Lack of feedback in the report,
* but I don't think this extra check can do much harm.
*/
if((CURLE_OK == result) || (CURLE_SEND_ERROR == result)) {
bool async;
bool protocol_done = TRUE;
/* Now, redo the connect and get a new connection */
result = Curl_connect(data, connp, &async, &protocol_done);
if(CURLE_OK == result) {
/* We have connected or sent away a name resolve query fine */
conn = *connp; /* setup conn to again point to something nice */
if(async) {
/* Now, if async is TRUE here, we need to wait for the name
to resolve */
result = Curl_wait_for_resolv(conn, NULL);
if(result)
return result;
/* Resolved, continue with the connection */
result = Curl_async_resolved(conn, &protocol_done);
if(result)
return result;
}
/* ... finally back to actually retry the DO phase */
result = conn->handler->do_it(conn, done);
}
}
}
if((result == CURLE_OK) && *done)
/* do_complete must be called after the protocol-specific DO function */
do_complete(conn);
}
return result;
}
CURLcode Curl_do_more(struct connectdata *conn)
{
CURLcode result=CURLE_OK;
if(conn->handler->do_more)
result = conn->handler->do_more(conn);
if(result == CURLE_OK)
/* do_complete must be called after the protocol-specific DO function */
do_complete(conn);
return result;
}
/* Called on connect, and if there's already a protocol-specific struct
allocated for a different connection, this frees it that it can be setup
properly later on. */
void Curl_reset_reqproto(struct connectdata *conn)
{
struct SessionHandle *data = conn->data;
if(data->state.proto.generic && data->state.current_conn != conn) {
free(data->state.proto.generic);
data->state.proto.generic = NULL;
}
data->state.current_conn = conn;
}
Reference in New Issue View Git Blame Copy Permalink