mirror/curl
2
0
Fork 0
mirror of https://github.com/curl/curl.git synced 2024-11-27 05:50:21 +08:00
Code Issues Packages Projects Releases Wiki Activity
0b3deceea3
curl/CHANGES

641 lines
28 KiB
Plaintext
Raw Blame History

_ _ ____ _
___| | | | _ \| |
/ __| | | | |_) | |
| (__| |_| | _ <| |___
\___|\___/|_| \_\_____|
Changelog
Daniel (13 May 2005)
- Grigory Entin reported that curl's configure detects a fine poll() for Mac
OS X 10.4 (while 10.3 or later detected a "bad" one), but the executable
doesn't work as good as if built without poll(). I've adjusted the configure
to always skip the fine-poll() test on Mac OS X (darwin).
Daniel (12 May 2005)
- When doing a second request (after a disconnect) using the same easy handle,
over a proxy that uses NTLM authentication, libcurl failed to use NTLM again
properly (the auth method was accidentally reset to the same as had been set
for host auth, which defaults to Basic). Bug report #1200661 identified the
the problem and the fix.
- If -z/--time-cond is used with an invalid date syntax, this is no longer
silently discarded. Instead a proper warning message is diplayed that
informs about it. But it still continues without the condition.
Version 7.14.0-pre2 (11 May 2005)
Daniel (11 May 2005)
- Starting now, libcurl sends a little different set of headers in its default
HTTP requests:
A) Normal non-proxy HTTP:
- no more "Pragma: no-cache" (this only makes sense to proxies)
B) Non-CONNECT HTTP request over proxy:
- "Pragma: no-cache" is used (like before)
- "Proxy-Connection: Keep-alive" (for older style 1.0-proxies)
C) CONNECT HTTP request over proxy:
- "Host: [name]:[port]"
- "Proxy-Connection: Keep-alive"
The A) case is mostly to reduce the default header size and remove a
pointless header.
The B) is to address (rare) problems with HTTP 1.0 proxies
The C) headers are both to address (rare) problems with some proxies. The
code in libcurl that deals with CONNECT requests need a rewrite, but it
feels like a too big a job for me to do now. Details are added in the code
comments for now.
Updated a large amount of test cases to reflect the news.
Daniel (10 May 2005)
- Half-baked attempt to bail out if select() returns _only_ errorfds when the
transfer is in progress. An attempt to fix Allan's problem. See
http://curl.haxx.se/mail/lib-2005-05/0073.html and the rest of that thread
for details.
I'm still not sure this is the right fix, but...
Version 7.14.0-pre1 (9 May 2005)
Daniel (2 May 2005)
- Sort of "fixed" KNOWN_BUGS #4: curl now builds IPv6 enabled on AIX 4.3. At
least it should no longer cause a compiler error. However, it does not have
AI_NUMERICHOST so we cannot getaddrinfo() any numerical addresses with it
(we use that for FTP PORT/EPRT)! So, I modified the configure check that
checks if the getaddrinfo() is working, to use AI_NUMERICHOST since then
it'll fail on AIX 4.3 and it will automatically build with IPv6 support
disabled.
- Added --trace-time that when used adds a time stamp to each trace line that
--trace, --trace-ascii and --verbose output. I also made the '>' display
separate each line on the linefeed so that HTTP requests etc look nicer in
the -v output.
- Made curl recognize the environment variables Lynx (and others?) support for
pointing out the CA cert path/file: SSL_CERT_DIR and SSL_CERT_FILE. If
CURL_CA_BUNDLE is not set, they are checked afterwards.
Like before: on windows if none of these are set, it checks for the ca cert
file like this:
1. application's directory
2. current working directory
3. Windows System directory (e.g. C:\windows\system32)
4. Windows Directory (e.g. C:\windows)
5. all directories along %PATH%
Daniel (1 May 2005)
- The runtests.pl script now starts test servers by doing fork() and exec()
instead of the previous approach. This is less complicated and should
hopefully lead to less "leaked" servers (servers that aren't stopped
properly when the tests are stopped).
- Alexander Zhuravlev found a case when you did "curl -I [URL]" and it
complained on the chunked encoding, even though a HEAD should never return a
body and thus it cannot be a chunked-encoding problem!
Daniel (30 April 2005)
- Alexander Zhuravlev found out that (lib)curl SIGSEGVed when using
--interface on an address that can't be bound.
Daniel (28 April 2005)
- Working on fixing up test cases to mark sections as 'mode=text' for things
that curl writes as text files, since then they can get different line
endings depending on OS. Andr<64>s Garc<72>a helps me work this out.
Did lots of other minor tweaks on the test scripts to work better and more
reliably find test servers and also kill test servers.
- Dan Fandrich pointed out how the runtests.pl script killed the HTTP server
instead of the HTTPS server when closing it down.
Daniel (27 April 2005)
- Paul Moore made curl check for the .curlrc file (_curlrc on windows) on two
more places. First, CURL_HOME is a new environment variable that is used
instead of HOME if it is set, to point out where the default config file
lives. If there's no config file in the dir pointed out by one of the
environment variables, the Windows version will instead check the same
directory the executable curl is located in.
Daniel (26 April 2005)
- Cory Nelson's work on nuking compiler warnings when building on x64 with
VS2005.
Daniel (25 April 2005)
- Fred New reported a bug where we used Basic auth and user name and password
in .netrc, and when following a Location: the subsequent requests didn't
properly use the auth as found in the netrc file. Added test case 257 to
verify my fix.
- Based on feedback from Cory Nelson, I added some preprocessor magic in
*/setup.h and */config-win32.h to build fine with VS2005 on x64.
Daniel (23 April 2005)
- Alex Suykov made the curl tool now assume that uploads using HTTP:// or
HTTPS:// are the only ones that show output and thus motivates a switched
off progress meter if the output is sent to the terminal. This makes FTP
uploads without '>', -o or -O show the progress meter.
Daniel (22 April 2005)
- Dave Dribin's MSVC makefile fix: set CURL_STATICLIB when it builds static
library variants.
- Andres Garcia fixed configure to set the proper define when building static
libcurl on windows.
- --retry-delay didn't work.
Daniel (18 April 2005)
- Olivier reported that even though he used CURLOPT_PORT, libcurl clearly
still used the default port. He was right. I fixed the problem and added the
test cases 521, 522 and 523 to verify the fix.
- Toshiyuki Maezawa reported that when doing a POST with a read callback,
libcurl didn't properly send an Expect: 100-continue header. It does now.
- I committed by mig change in the test suite's FTP server that moves out all
socket/TCP code to a separate C program named sockfilt. And added 4 new
test cases for FTP over IPv6.
Daniel (8 April 2005)
- Cory Nelson reported a problem with a HTTP server that responded with a 304
response containing an "illegal" Content-Length: header, which was not
properly ignored by libcurl. Now it is. Test case 249 verifies.
Daniel (7 April 2005)
- Added ability to build and run with GnuTLS as an alternative to OpenSSL for
the secure layer. configure --with-gnutls enables with. Note that the
previous OpenSSL check still has preference and if it first detects OpenSSL,
it will not check for GnuTLS. You may need to explictly diable OpenSSL with
--without-ssl.
This work has been sponsored by The Written Word.
Daniel (5 April 2005)
- Christophe Legry fixed the post-upload check for FTP to not complain if the
upload was skipped due to a time-condition as set with
CURLOPT_TIMECONDITION. I added test case 247 and 248 to verify.
Version 7.13.2 (5 April 2005)
Daniel (4 April 2005)
- Marcelo Juchem fixed the MSVC makefile for libcurl
- Gisle Vanem fixed a crash in libcurl, that could happen if the easy handle
was killed before the threading resolver (windows only) still hadn't
completed.
- Hardeep Singh reported a problem doing HTTP POST with Digest. (It was
actually also affecting NTLM and Negotiate.) It turned out that if the
server responded with 100 Continue before the initial 401 response, libcurl
didn't take care of the response properly. Test case 245 and 246 added to
verify this.
Daniel (30 March 2005)
- Andres Garcia modified the configure script to check for libgdi32 before
libcrypto, to make the SSL check work fine on msys/mingw.
Daniel (29 March 2005)
- Tom Moers identified a flaw when you sent a POST with Digest authentication,
as in the first request when curl sends a POST with Content-Length: 0, it
still forcibly closed the connection before doing the next step in the auth
negotiation.
- Jesper Jensen found out that FTP-SSL didn't work since my FTP
rewrite. Fixing that was easy, but it also revealed a much worse problem:
the FTP server response reader function didn't properly deal with reading
responses in multiple tiny chunks properly! I modified the FTP server to
allow it to produce such split-up responses to make sure curl deals with
them as it should.
- Based on Augustus Saunders' comments and findings, the HTTP output auth
function was fixed to use the proper proxy authentication when multiple ones
are accepted. test 239 and test 243 were added to repeat the problems and
verify the fixes.
--proxy-anyauth was added to the curl tool
Daniel (16 March 2005)
- Tru64 and some IRIX boxes seem to not like test 237 as it is. Their
inet_addr() functions seems to use &255 on all numericals in a ipv4 dotted
address which makes a different failure... Now I've modified the ipv4
resolve code to use inet_pton() instead in an attempt to make these systems
better detect this as a bad IP address rather than creating a toally bogus
address that is then passed on and used.
Daniel (15 March 2005)
- Dan Fandrich made the code properly use the uClibc's version of
inet_ntoa_r() when built with it.
- Added test 237 and 238: test EPSV and PASV response handling when they get
well- formated data back but using illegal values. In 237 PASV gets an IP
address that is way bad. In 238 EPSV gets a port that is way out of range.
Daniel (14 March 2005)
- Added a few missing features to the curl-config --features list
- Modified testcurl.pl to now offer
1 - command line options for all info it previously only read from
file: --name, --email, --desc and --configure
2 - --nocvsup makes it not attempt to do cvs update
3 - --crosscompile informs it and makes it not attempt things it can't do
- Fixed numerous win32 compiler warnings.
- Removed the lib/security.h file since it shadowed the mingw/win32 header
with the same name which is needed for SSPI builds. The contents of the
former security.h is now i krb4.h
- configure --enable-sspi now enables SSPI in the build. It only works for
windows builds (including cross-compiles for windows).
Daniel (12 March 2005)
- David Houlder added --form-string that adds that string to a multipart
formpost part, without special characters having special meanings etc like
--form features.
Daniel (11 March 2005)
- curl_version_info() returns the feature bit CURL_VERSION_SSPI if it was
built with SSPI support.
- Christopher R. Palmer made it possible to build libcurl with the
USE_WINDOWS_SSPI on Windows, and then libcurl will be built to use the
native way to do NTLM. SSPI also allows libcurl to pass on the current user
and its password in the request.
Daniel (9 March 2005)
- Dan F improved the SSL lib setup in configure.
- Nodak Sodak reported a crash when using a SOCKS4 proxy.
- Jean-Marc Ranger pointed out an embarassing debug printf() leftover in the
multi interface code.
- Adjusted the man page for the curl_getdate() return value for dates after
year 2038. For 32 bit time_t it returns 0x7fffffff but for 64bit time_t it
returns either the correct value or even -1 on some systems that still seem
to not deal with this properly. Tor Arntsen found a 64bit AIX system for us
that did the latter. Gwenole Beauchesne's Mandrake patch put the lights on
this problem in the first place.
Daniel (8 March 2005)
- Dominick Meglio reported that using CURLOPT_FILETIME when transferring a FTP
file got a Last-Modified: header written to the data stream, corrupting the
actual data. This was because some conditions from the previous FTP code was
not properly brought into the new FTP code. I fixed and I added test case
520 to verify. (This bug was introduced in 7.13.1)
- Dan Fandrich fixed the configure --with-zlib option to always consider the
given path before any standard paths.
Daniel (6 March 2005)
- Randy McMurchy was the first to report that valgrind.pm was missing from the
release archive and thus 'make test' fails.
Daniel (5 March 2005)
- Dan Fandrich added HAVE_FTRUNCATE to several config-*.h files.
- Added test case 235 that makes a resumed upload of a file that isn't present
on the remote side. This then converts the operation to an ordinary STOR
upload. This was requested/pointed out by Ignacio Vazquez-Abrams.
It also proved (and I fixed) a bug in the newly rewritten ftp code (and
present in the 7.13.1 release) when trying to resume an upload and the
servers returns an error to the SIZE command. libcurl then loops and sends
SIZE commands infinitely.
- Dan Fandrich fixed a SSL problem introduced on February 9th that made
libcurl attempt to load the whole random file to seed the PRNG. This is
really bad since this turns out to be using /dev/urandom at times...
Version 7.13.1 (4 March 2005)
Daniel (4 March 2005)
- Dave Dribin made it possible to set CURLOPT_COOKIEFILE to "" to activate
the cookie "engine" without having to provide an empty or non-existing file.
- Rene Rebe fixed a -# crash when more data than expected was retrieved.
Daniel (22 February 2005)
- NTLM and ftp-krb4 buffer overflow fixed, as reported here:
http://www.securityfocus.com/archive/1/391042 and the CAN report here:
http://cve.mitre.org/cgi-bin/cvename.cgi?name=CAN-2005-0490
If these security guys were serious, we'd been notified in advance and we
could've saved a few of you a little surprise, but now we weren't.
Daniel (19 February 2005)
- Ralph Mitchell reported a flaw when you used a proxy with auth, and you
requested data from a host and then followed a redirect to another
host. libcurl then didn't use the proxy-auth properly in the second request,
due to the host-only check for original host name wrongly being extended to
the proxy auth as well. Added test case 233 to verify the flaw and that the
fix removed the problem.
Daniel (18 February 2005)
- Mike Dobbs reported a mingw build failure due to the lack of
BUILDING_LIBCURL being defined when libcurl is built. Now this is defined by
configure when mingw is used.
Daniel (17 February 2005)
- David in bug report #1124588 found and fixed a socket leak when libcurl
didn't close the socket properly when returning error due to failing
localbind
Daniel (16 February 2005)
- Christopher R. Palmer reported a problem with HTTP-POSTing using "anyauth"
that picks NTLM. Thanks to David Byron letting me test NTLM against his
servers, I could quickly repeat and fix the problem. It turned out to be:
When libcurl POSTs without knowing/using an authentication and it gets back
a list of types from which it picks NTLM, it needs to either continue
sending its data if it keeps the connection alive, or not send the data but
close the connection. Then do the first step in the NTLM auth. libcurl
didn't send the data nor close the connection but simply read the
response-body and then sent the first negotiation step. Which then failed
miserably of course. The fixed version forces a connection if there is more
than 2000 bytes left to send.
Daniel (14 February 2005)
- The configure script didn't check for ENGINE_load_builtin_engines() so it
was never used.
Daniel (11 February 2005)
- Removed all uses of strftime() since it uses the localised version of the
week day names and month names and servers don't like that.
Daniel (10 February 2005)
- Now the test script disables valgrind-testing when the test suite runs if
libcurl is built shared. Otherwise valgrind only tests the shell that runs
the wrapper-script named 'curl' that is a front-end to curl in this case.
This should also fix the huge amount of reports of false positives when
valgrind has identified leaks in (ba)sh and not in curl and people report
that as curl bugs. Bug report #1116672 is one example.
Also, the valgrind report parser has been adapted to check that at least one
of the sources in a stack strace is one of (lib)curl's source files or
otherwise it will not consider the problem to concern (lib)curl.
- Marty Kuhrt streamlined the VMS build.
Daniel (9 February 2005)
- David Byron fixed his SSL problems, initially mentioned here:
http://curl.haxx.se/mail/lib-2005-01/0240.html. It turned out we didn't use
SSL_pending() as we should.
- Converted lots of FTP code to a statemachine, so that the multi interface
doesn't block while communicating commands-responses with an FTP server.
I've added a comment like BLOCKING in the code on all spots I could find
where we still have blocking operations. When we change curl_easy_perform()
to use the multi interface, we'll also be able to simplify the code since
there will only be one "internal interface".
While doing this, I've now made CURLE_FTP_ACCESS_DENIED separate from the
new CURLE_LOGIN_DENIED. The first one is now access denied to a function,
like changing directory or retrieving a file, while the second means that we
were denied login.
The CVS tag 'before_ftp_statemachine' was set just before this went in, in
case of future need.
- Gisle made the DICT code send CRLF and not just LF as the spec says so.
Daniel (8 February 2005)
- Gisle fixed problems when libcurl runs out of memory, and worked on making
sure the proper error code is returned for those occations.
Daniel (7 February 2005)
- Maruko pointed out a problem with inflate decompressing exactly 64K
contents.
Daniel (5 February 2005)
- Eric Vergnaud found a use of an uninitialised variable in the ftp when doing
PORT on ipv6-enabled hosts.
- David Byron pointed out we could use BUFSIZE to read data (in
lib/transfer.c) instead of using BUFSIZE -1.
Version 7.13.0 (1 February 2005)
Daniel (31 January 2005)
- Added Lars Nilsson's htmltitle.cc example
Daniel (30 January 2005)
- Fixed a memory leak when using the multi interface and the DO operation
failed (as in test case 205).
- Fixed a valgrind warning for file:// operations.
- Fixed a valgrind report in the url globbing code for the curl command line
tool.
- Bugfixed the parser that scans the valgrind report outputs (in runtests.pl).
I noticed that it previously didn't detect and report the "Conditional jump
or move depends on uninitialised value(s)" error. When I fixed this, I
caught a few curl bugs with it. And then I had to spend time to make the
test suite IGNORE these errors when OpenSSL is used since it produce massive
amounts of valgrind warnings (but only of the "Conditional..." kind it
seems). So, if a test that requires SSL is run, it ignores the
"Conditional..." errors, and you'll get a "valgrind PARTIAL" output instead
of "valgrind OK".
Daniel (29 January 2005)
- Using the multi interface, and doing a requsted a re-used connection that
gets closed just after the request has been sent failed and did not re-issue
a request on a fresh reconnect like the easy interface did. Now it does!
- Define CURL_MULTIEASY when building libcurl (lib/easy.c to be exact), to use
my new curl_easy_perform() that uses the multi interface to run the
request. It is a great testbed for the multi interface and I believe we
shall do it this way for real in the future when we have a successor to
curl_multi_fdset(). I've used this approach to detect and fix several of the
recent multi-interfaces issues.
- Adjusted the KNOWN_BUGS #17 fix a bit more since the FTP code also did some
bad assumptions.
- multi interface: when a request is denied due to "Maximum redirects
followed" libcurl leaked the last Location: URL.
- Connect failures with the multi interface was often returned as "connect()
timed out" even though the reason was different.
Daniel (28 January 2005)
- KNOWN_BUGS #17 fixed. A DNS cache entry may not remain locked between two
curl_easy_perform() invokes. It was previously unlocked at disconnect, which
could mean that it remained locked between multiple transfers. The DNS cache
may not live as long as the connection cache does, as they are separate.
To deal with the lack of DNS (host address) data availability in re-used
connections, libcurl now keeps a copy of the IP adress as a string, to be
able to show it even on subsequent requests on the same connection.
The problem could be made to appear with this stunt:
1. create a multi handle
2. add an easy handle
3. fetch a URL that is persistent (leaves the connection alive)
4. remove the easy handle from the multi
5. kill the multi handle
6. create a multi handle
7. add the same easy handle to the new multi handle
8. fetch a URL from the same server as before (re-using the connection)
- Stephen More pointed out that CURLOPT_FTPPORT and the -P option didn't work
when built ipv6-enabled. I've now made a fix for it. Writing test cases for
custom port hosts turned too tricky so unfortunately there's none.
Daniel (25 January 2005)
- Ian Ford asked about support for the FTP command ACCT, and I discovered it
is present in RFC959... so now (lib)curl supports it as well. --ftp-account
and CURLOPT_FTP_ACCOUNT set the account string. (The server may ask for an
account string after PASS have been sent away. The client responds
with "ACCT [account string]".) Added test case 228 and 229 to verify the
functionality. Updated the test FTP server to support ACCT somewhat.
- David Shaw contributed a fairly complete and detailed autoconf test you can
use to detect libcurl and setup variables for the protocols the installed
libcurl supports: docs/libcurl/libcurl.m4
Daniel (21 January 2005)
- Major FTP third party transfer overhaul.
These four options are now obsolete: CURLOPT_SOURCE_HOST,
CURLOPT_SOURCE_PATH, CURLOPT_SOURCE_PORT (this option didn't work before)
and CURLOPT_PASV_HOST.
These two options are added: CURLOPT_SOURCE_URL and CURLOPT_SOURCE_QUOTE.
The target-side didn't use the proper path with RETR, and thus this only
worked correctly in the login path (i.e without doing any CWD). The source-
side still uses a wrong path, but the fix for this will need to wait. Verify
the flaw by using a source URL with included %XX-codes.
Made CURLOPT_FTPPORT control weather the target operation should use PORT
(or not). The other side thus uses passive (PASV) mode.
Updated the ftp3rdparty.c example source to use the updated options.
Added support for a second FTP server in the test suite. Named... ftp2.
Added test cases 230, 231 and 232 as a few first basic tests of very simple
3rd party transfers.
Changed the debug output to include 'target' and 'source' when a 3rd party
is being made, to make it clearer what commands/responses came on what
connection.
Added three new command line options: --3p-url, --3p-user and --3p-quote.
Documented the command line options and the curl_easy_setopt options related
to third party transfers.
(Temporarily) disabled the ability to re-use an existing connection for the
source connection. This is because it needs to force a new in case the
source and target is the same host, and the host name check is trickier now
when the source is identified with a full URL instead of a plain host name
like before.
TODO (short-term) for 3rd party transfers: quote support. The options are
there, we need to add test cases to verify their functionality.
TODO (long-term) for 3rd party transfers: IPv6 support (EPRT and EPSV etc)
and SSL/TSL support.
Daniel (20 January 2005)
- Philippe Hameau found out that -Q "+[command]" didn't work, although some
code was written for it. I fixed and added test case 227 to verify it.
The curl.1 man page didn't mention the '+' so I added it.
Daniel (19 January 2005)
- Stephan Bergmann made libcurl return CURLE_URL_MALFORMAT if an FTP URL
contains %0a or %0d in the user, password or CWD parts. (A future fix would
include doing it for %00 as well - see KNOWN_BUGS for details.) Test case
225 and 226 were added to verify this
- Stephan Bergmann pointed out two flaws in libcurl built with HTTP disabled:
1) the proxy environment variables are still read and used to set HTTP proxy
2) you couldn't disable http proxy with CURLOPT_PROXY (since the option was
disabled). This is important since apps may want to disable HTTP proxy
without actually knowing if libcurl was built to disable HTTP or not.
Based on Stephan's patch, both these issues should now be fixed.
Daniel (18 January 2005)
- Cody Jones' enhanced version of Samuel D<>az Garc<72>a's MSVC makefile patch was
applied.
Daniel (16 January 2005)
- Alex aka WindEagle pointed out that when doing "curl -v dictionary.com", curl
assumed this used the DICT protocol. While guessing protocols will remain
fuzzy, I've now made sure that the host names must start with "[protocol]."
for them to be a valid guessable name. I also removed "https" as a prefix
that indicates HTTPS, since we hardly ever see any host names using that.
Daniel (13 January 2005)
- Inspired by Martijn Koster's patch and example source at
http://www.greenhills.co.uk/mak/gentoo/curl-eintr-bug.c, I now made the
select() and poll() calls properly loop if they return -1 and errno is
EINTR. glibc docs for this is found here:
http://www.gnu.org/software/libc/manual/html_node/Interrupted-Primitives.html
This last link says BSD doesn't have this "effect". Will there be a problem
if we do this unconditionally?
Daniel (11 January 2005)
- Dan Torop cleaned up a few no longer used variables from David Phillips'
select() overhaul fix.
- Cyrill Osterwalder posted a detailed analysis about a bug that occurs when
using a custom Host: header and curl fails to send a request on a re-used
persistent connection and thus creates a new connection and resends it. It
then sent two Host: headers. Cyrill's analysis was posted here:
http://curl.haxx.se/mail/archive-2005-01/0022.html
- Bruce Mitchener identified (bug report #1099640) the never-ending SOCKS5
problem with the version byte and the check for bad versions. Bruce has lots
of clues on this, and based on his suggestion I've now removed the check of
that byte since it seems to be able to contain 1 or 5.
Daniel (10 January 2005)
- Pavel Orehov reported memory problems with the multi interface in bug report
#1098843. In short, a shared DNS cache was setup for a multi handle and when
the shared cache was deleted before the individual easy handles, the latter
cleanups caused read/writes to already freed memory.
- Hzhijun reported a memory leak in the SSL certificate code, that leaked the
remote certificate name when it didn't match the used host name.
Gisle (8 January 2005)
- Added Makefile.Watcom files (src/lib). Updated Makefile.dist.
Daniel (7 January 2005)
- Improved the test script's valgrind log parser to actually work! Also added
the ability to disable the log scanner for specific test cases. Test case
509 results in numerous problems and leaks in OpenSSL and has to get it
disabled.
Daniel (6 January 2005)
- Fixed a single-byte read out of bounds in test case 39 in the curl tool code
(i.e not in the library).
- Bug report #1097019 identified a problem when doing -d "data" with -G and
sending it to two URLs with {}. Added test 199 to verify the fix.
Daniel (4 January 2005)
- Marty Kuhrt adjusted a VMS build script slightly
- Kai Sommerfeld and Gisle Vanem fixed libcurl to build with IPv6 support on
Win2000.
Daniel (2 January 2005)
- Alex Neblett updated the MSVC makefiles slightly.
Reference in New Issue View Git Blame Copy Permalink