Connection filter had a `get_select_socks()` method, inspired by the
various `getsocks` functions involved during the lifetime of a
transfer. These, depending on transfer state (CONNECT/DO/DONE/ etc.),
return sockets to monitor and flag if this shall be done for POLLIN
and/or POLLOUT.
Due to this design, sockets and flags could only be added, not
removed. This led to problems in filters like HTTP/2 where flow control
prohibits the sending of data until the peer increases the flow
window. The general transfer loop wants to write, adds POLLOUT, the
socket is writeable but no data can be written.
This leads to cpu busy loops. To prevent that, HTTP/2 did set the
`SEND_HOLD` flag of such a blocked transfer, so the transfer loop cedes
further attempts. This works if only one such filter is involved. If a
HTTP/2 transfer goes through a HTTP/2 proxy, two filters are
setting/clearing this flag and may step on each other's toes.
Connection filters `get_select_socks()` is replaced by
`adjust_pollset()`. They get passed a `struct easy_pollset` that keeps
up to `MAX_SOCKSPEREASYHANDLE` sockets and their `POLLIN|POLLOUT`
flags. This struct is initialized in `multi_getsock()` by calling the
various `getsocks()` implementations based on transfer state, as before.
After protocol handlers/transfer loop have set the sockets and flags
they want, the `easy_pollset` is *always* passed to the filters. Filters
"higher" in the chain are called first, starting at the first
not-yet-connection one. Each filter may add sockets and/or change
flags. When all flags are removed, the socket itself is removed from the
pollset.
Example:
* transfer wants to send, adds POLLOUT
* http/2 filter has a flow control block, removes POLLOUT and adds
POLLIN (it is waiting on a WINDOW_UPDATE from the server)
* TLS filter is connected and changes nothing
* h2-proxy filter also has a flow control block on its tunnel stream,
removes POLLOUT and adds POLLIN also.
* socket filter is connected and changes nothing
* The resulting pollset is then mixed together with all other transfers
and their pollsets, just as before.
Use of `SEND_HOLD` is no longer necessary in the filters.
All filters are adapted for the changed method. The handling in
`multi.c` has been adjusted, but its state handling the the protocol
handlers' `getsocks` method are untouched.
The most affected filters are http/2, ngtcp2, quiche and h2-proxy. TLS
filters needed to be adjusted for the connecting handshake read/write
handling.
No noticeable difference in performance was detected in local scorecard
runs.
Closes#11833
- use shared code for setting up the CONNECT request
when tunneling, used in HTTP/1.x and HTTP/2 proxying
- eliminate use of Curl_buffer_send() and other manipulations
of `data->req` or `data->state.ulbuf`
Closes#11808
- use CLIENTWRITE_BODY *only* when data is actually body data
- add CLIENTWRITE_INFO for meta data that is *not* a HEADER
- debug assertions that BODY/INFO/HEADER is not used mixed
- move `data->set.include_header` check into Curl_client_write
so protocol handlers no longer have to care
- add special in FTP for `data->set.include_header` for historic,
backward compatible reasons
- move unpausing of client writes from easy.c to sendf.c, so that
code is in one place and can forward flags correctly
Closes#11885
Some of these changes come from comparing `Curl_http` and
`start_CONNECT`, which are similar, and adding things to them that are
present in one and missing in another.
The most important changes:
- In `start_CONNECT`, add a missing `hyper_clientconn_free` call on the
happy path.
- In `start_CONNECT`, add a missing `hyper_request_free` on the error
path.
- In `bodysend`, add a missing `hyper_body_free` on an early-exit path.
- In `bodysend`, remove an unnecessary `hyper_body_free` on a different
error path that would cause a double-free.
https://docs.rs/hyper/latest/hyper/ffi/fn.hyper_request_set_body.html
says of `hyper_request_set_body`: "This takes ownership of the
hyper_body *, you must not use it or free it after setting it on the
request." This is true even if `hyper_request_set_body` returns an
error; I confirmed this by looking at the hyper source code.
Other changes are minor but make things slightly nicer.
Closes#11745
To avoid abuse. The limit is set to 300 KB for the accumulated size of
all received HTTP headers for a single response. Incomplete research
suggests that Chrome uses a 256-300 KB limit, while Firefox allows up to
1MB.
Closes#11582
Rename `close` and `connect` in `struct Curl_cftype` for
consistency and to avoid clashes with macros of the same name
(the standard AmigaOS networking connect() function is implemented
via a macro).
Closes#11491
Aka "jumbo" or "amalgamation" builds. It means to compile all sources
per target as a single C source. This is experimental.
You can enable it by passing `-DCMAKE_UNITY_BUILD=ON` to cmake.
It requires CMake 3.16 or newer.
It makes builds (much) faster, allows for better optimizations and tends
to promote less ambiguous code.
Also add a new AppVeyor CI job and convert an existing one to use
"unity" mode (one MSVC, one MinGW), and enable it for one macOS CI job.
Fix related issues:
- add missing include guard to `easy_lock.h`.
- rename static variables and functions (and a macro) with names reused
across sources, or shadowed by local variables.
- add an `#undef` after use.
- add a missing `#undef` before use.
- move internal definitions from `ftp.h` to `ftp.c`.
- `curl_memory.h` fixes to make it work when included repeatedly.
- stop building/linking curlx bits twice for a static-mode curl tool.
These caused doubly defined symbols in unity builds.
- silence missing extern declarations compiler warning for ` _CRT_glob`.
- fix extern declarations for `tool_freq` and `tool_isVistaOrGreater`.
- fix colliding static symbols in debug mode: `debugtime()` and
`statename`.
- rename `ssl_backend_data` structure to unique names for each
TLS-backend, along with the `ssl_connect_data` struct member
referencing them. This required adding casts for each access.
- add workaround for missing `[P]UNICODE_STRING` types in certain Windows
builds when compiling `lib/ldap.c`. To support "unity" builds, we had
to enable `SCHANNEL_USE_BLACKLISTS` for Schannel (a Windows
`schannel.h` option) _globally_. This caused an indirect inclusion of
Windows `schannel.h` from `ldap.c` via `winldap.h` to have it enabled
as well. This requires `[P]UNICODE_STRING` types, which is apperantly
not defined automatically (as seen with both MSVS and mingw-w64).
This patch includes `<subauth.h>` to fix it.
Ref: https://github.com/curl/curl/runs/13987772013
Ref: https://dev.azure.com/daniel0244/curl/_build/results?buildId=15827&view=logs&jobId=2c9f582d-e278-56b6-4354-f38a4d851906&j=2c9f582d-e278-56b6-4354-f38a4d851906&t=90509b00-34fa-5a81-35d7-5ed9569d331c
- tweak unity builds to compile `lib/memdebug.c` separately in memory
trace builds to avoid PP confusion.
- force-disable unity for test programs.
- do not compile and link libcurl sources to libtests _twice_ when libcurl
is built in static mode.
KNOWN ISSUES:
- running tests with unity builds may fail in cases.
- some build configurations/env may not compile in unity mode. E.g.:
https://ci.appveyor.com/project/curlorg/curl/builds/47230972/job/51wfesgnfuauwl8q#L250
Ref: https://github.com/libssh2/libssh2/issues/1034
Ref: https://cmake.org/cmake/help/latest/prop_tgt/UNITY_BUILD.html
Ref: https://en.wikipedia.org/wiki/Unity_buildCloses#11095
The open paren check wants to warn for spaces before open parenthesis
for if/while/for but also for any function call. In order to avoid
catching function pointer declarations, the logic allows a space if the
first character after the open parenthesis is an asterisk.
I also spotted what we did not include "switch" in the check but we should.
This check is a little lame, but we reduce this problem by not allowing
that space for if/while/for/switch.
Reported-by: Emanuele Torre
Closes#11044
- currently only on debug build and when env variable
CURL_PROXY_TUNNEL_H2 is present.
- will ALPN negotiate with the proxy server and switch
tunnel filter based on the protocol negotiated.
- http/1.1 tunnel code moved into cf-h1-proxy.[ch]
- http/2 tunnel code implemented in cf-h2-proxy.[ch]
- tunnel start and ALPN set remains in http_proxy.c
- moving all haproxy related code into cf-haproxy.[ch]
VTLS changes
- SSL filters rely solely on the "alpn" specification they
are created with and no longer check conn->bits.tls_enable_alpn.
- checks on which ALPN specification to use (or none at all) are
done in vtls.c when creating the filter.
Testing
- added a nghttpx forward proxy to the pytest setup that
speaks HTTP/2 and forwards all requests to the Apache httpd
forward proxy server.
- extending test coverage in test_10 cases
- adding proxy tests for direct/tunnel h1/h2 use of basic auth.
- adding test for http/1.1 and h2 proxy tunneling to pytest
Closes#10780
