Use a lookup list to set the cipher suites, allowing the
ciphers to be set by either openssl or IANA names.
To keep the binary size of the lookup list down we compress
each entry in the cipher list down to 2 + 6 bytes using the
C preprocessor.
Closes#13442
- Call OPENSSL_thread_stop on thread termination (DLL_THREAD_DETACH)
to prevent a memory leak in case OpenSSL is linked statically.
- Warn in libcurl-thread.3 that if OpenSSL is linked statically then it
may require thread cleanup.
OpenSSL may need per-thread cleanup to stop a memory leak. For Windows
and Cygwin if libcurl was built as a DLL then we can do that for the
user by calling OPENSSL_thread_stop on thread termination. However, if
libcurl was built statically then we do not have notification of thread
termination and cannot do that for the user.
Also, there are several other unusual cases where it may be necessary
for the user to call OPENSSL_thread_stop, so in the libcurl-thread
warning I added a link to the OpenSSL documentation.
Co-authored-by: Viktor Szakats
Reported-by: southernedge@users.noreply.github.com
Reported-by: zmcx16@users.noreply.github.com
Ref: https://www.openssl.org/docs/man3.0/man3/OPENSSL_thread_stop.html#NOTES
Fixes https://github.com/curl/curl/issues/12327
Closes https://github.com/curl/curl/pull/12408
Curl_read/Curl_write clarifications
- replace `Curl_read()`, `Curl_write()` and `Curl_nwrite()` to 1clarify
when and at what level they operate
- send/recv of transfer related data is now done via
`Curl_xfer_send()/Curl_xfer_recv()` which no longer has
socket/socketindex as parameter. It decides on the transfer setup of
`conn->sockfd` and `conn->writesockfd` on which connection filter
chain to operate.
- send/recv on a specific connection filter chain is done via
`Curl_conn_send()/Curl_conn_recv()` which get the socket index as
parameter.
- rename `Curl_setup_transfer()` to `Curl_xfer_setup()` for naming
consistency
- clarify that the special CURLE_AGAIN handling to return `CURLE_OK`
with length 0 only applies to `Curl_xfer_send()` and CURLE_AGAIN is
returned by all other send() variants.
SingleRequest reshuffling
- move functions into request.[ch]
- differentiate between reset and free
- add Curl_req_done() to perform last actions
- add a send `bufq` to SingleRequest for future use in keeping upload data
Closes#12963
Refactoring of the client writer that passes the data to the
client/application's callback functions.
- split out into own source cw-out.[ch] from sendf.c
- move tempwrite and tempcount from data->state into the context of the
client writer
- redesign the 3 tempwrite dynbufs as a linked list of dynbufs. On
paused transfers, this allows to "record" interleaved HEADER/BODY
chunks to be "played back" in the same order on unpausing.
- keep the overall size limit of all buffered data to DYN_PAUSE_BUFFER.
On exceeding that, return CURLE_TOO_LARGE instead of
CURLE_OUT_OF_MEMORY as before.
- add method to be called when a transfer is DONE to allow writing of
any data still buffered
- when paused, record HEADER writes exactly as they come for later
playback. HEADERs are documented to be written one-by-one.
Closes#12898
- HTTP/3 for curl using OpenSSL's own QUIC stack together
with nghttp3
- configure with `--with-openssl-quic` to enable curl to
build this. This requires the nghttp3 library
- implementation with the following restrictions:
* macOS has to use an unconnected UDP socket due to an
issue in OpenSSL's datagram implementation
See https://github.com/openssl/openssl/issues/23251
This makes connections to non-reponsive servers hang.
* GET requests will send the indicator that they have
no body in a separate QUIC packet. This may result
in processing delays or Transfer-Encodings on proxied
requests
* uploads that encounter blocks will use 100% cpu as
detection of these flow control issue is not working
(we have not figured out to pry that from OpenSSL).
Closes#12734
We remove support for building curl with gskit.
- This is a niche TLS library, only running on some IBM systems
- no regular curl contributors use this backend
- no CI builds use or verify this backend
- gskit, or the curl adaption for it, lacks many modern TLS features
making it an inferior solution
- build breakages in this code take weeks or more to get detected
- fixing gskit code is mostly done "flying blind"
This removal has been advertized in DEPRECATED in Jan 2, 2023 and it has
been mentioned on the curl-library mailing list.
It could be brought back, this is not a ban. Given proper effort and
will, gskit support is welcome back into the curl TLS backend family.
Closes#11460
https://github.com/curl/curl/pull/7121 introduced a macOS system call
to `SCDynamicStoreCopyProxies`, which is invoked every time an IP
address needs to be resolved.
However, this system call is not thread-safe, and macOS will kill the
process if the system call is run first in a fork. To make it possible
for the parent process to call this once and prevent the crash, only
invoke this system call in the global initialization routine.
In addition, this change is beneficial because it:
1. Avoids extra macOS system calls for every IP lookup.
2. Consolidates macOS-specific initialization in a separate file.
Fixes#11252Closes#11254
Aka "jumbo" or "amalgamation" builds. It means to compile all sources
per target as a single C source. This is experimental.
You can enable it by passing `-DCMAKE_UNITY_BUILD=ON` to cmake.
It requires CMake 3.16 or newer.
It makes builds (much) faster, allows for better optimizations and tends
to promote less ambiguous code.
Also add a new AppVeyor CI job and convert an existing one to use
"unity" mode (one MSVC, one MinGW), and enable it for one macOS CI job.
Fix related issues:
- add missing include guard to `easy_lock.h`.
- rename static variables and functions (and a macro) with names reused
across sources, or shadowed by local variables.
- add an `#undef` after use.
- add a missing `#undef` before use.
- move internal definitions from `ftp.h` to `ftp.c`.
- `curl_memory.h` fixes to make it work when included repeatedly.
- stop building/linking curlx bits twice for a static-mode curl tool.
These caused doubly defined symbols in unity builds.
- silence missing extern declarations compiler warning for ` _CRT_glob`.
- fix extern declarations for `tool_freq` and `tool_isVistaOrGreater`.
- fix colliding static symbols in debug mode: `debugtime()` and
`statename`.
- rename `ssl_backend_data` structure to unique names for each
TLS-backend, along with the `ssl_connect_data` struct member
referencing them. This required adding casts for each access.
- add workaround for missing `[P]UNICODE_STRING` types in certain Windows
builds when compiling `lib/ldap.c`. To support "unity" builds, we had
to enable `SCHANNEL_USE_BLACKLISTS` for Schannel (a Windows
`schannel.h` option) _globally_. This caused an indirect inclusion of
Windows `schannel.h` from `ldap.c` via `winldap.h` to have it enabled
as well. This requires `[P]UNICODE_STRING` types, which is apperantly
not defined automatically (as seen with both MSVS and mingw-w64).
This patch includes `<subauth.h>` to fix it.
Ref: https://github.com/curl/curl/runs/13987772013
Ref: https://dev.azure.com/daniel0244/curl/_build/results?buildId=15827&view=logs&jobId=2c9f582d-e278-56b6-4354-f38a4d851906&j=2c9f582d-e278-56b6-4354-f38a4d851906&t=90509b00-34fa-5a81-35d7-5ed9569d331c
- tweak unity builds to compile `lib/memdebug.c` separately in memory
trace builds to avoid PP confusion.
- force-disable unity for test programs.
- do not compile and link libcurl sources to libtests _twice_ when libcurl
is built in static mode.
KNOWN ISSUES:
- running tests with unity builds may fail in cases.
- some build configurations/env may not compile in unity mode. E.g.:
https://ci.appveyor.com/project/curlorg/curl/builds/47230972/job/51wfesgnfuauwl8q#L250
Ref: https://github.com/libssh2/libssh2/issues/1034
Ref: https://cmake.org/cmake/help/latest/prop_tgt/UNITY_BUILD.html
Ref: https://en.wikipedia.org/wiki/Unity_buildCloses#11095
- with `--proxy-http2` allow h2 ALPN negotiation to
forward proxies
- applies to http: requests against a https: proxy only,
as https: requests will auto-tunnel
- adding a HTTP/1 request parser in http1.c
- removed h2h3.c
- using new request parser in nghttp2 and all h3 backends
- adding test 2603 for request parser
- adding h2 proxy test cases to test_10_*
scorecard.py: request scoring accidentally always run curl
with '-v'. Removed that, expect double numbers.
labeller: added http1.* and h2-proxy sources to detection
Closes#10967
- currently only on debug build and when env variable
CURL_PROXY_TUNNEL_H2 is present.
- will ALPN negotiate with the proxy server and switch
tunnel filter based on the protocol negotiated.
- http/1.1 tunnel code moved into cf-h1-proxy.[ch]
- http/2 tunnel code implemented in cf-h2-proxy.[ch]
- tunnel start and ALPN set remains in http_proxy.c
- moving all haproxy related code into cf-haproxy.[ch]
VTLS changes
- SSL filters rely solely on the "alpn" specification they
are created with and no longer check conn->bits.tls_enable_alpn.
- checks on which ALPN specification to use (or none at all) are
done in vtls.c when creating the filter.
Testing
- added a nghttpx forward proxy to the pytest setup that
speaks HTTP/2 and forwards all requests to the Apache httpd
forward proxy server.
- extending test coverage in test_10 cases
- adding proxy tests for direct/tunnel h1/h2 use of basic auth.
- adding test for http/1.1 and h2 proxy tunneling to pytest
Closes#10780
Adding `bufq`:
- at init() time configured to hold up to `n` chunks of `m` bytes each.
- various methods for reading from and writing to it.
- `peek` support to get access to buffered data without copy
- `pass` support to allow buffer flushing on write if it becomes full
- use case: IO buffers for dynamic reads and writes that do not blow up
- distinct from `dynbuf` in that:
- it maintains a read position
- writes on a full bufq return CURLE_AGAIN instead of nuking itself
- Init options:
- SOFT_LIMIT: allow writes into a full bufq
- NO_SPARES: free empty chunks right away
- a `bufc_pool` that can keep a number of spare chunks to
be shared between different `bufq` instances
Adding `dynhds`:
- a straightforward list of name+value pairs as used for HTTP headers
- headers can be appended dynamically
- headers can be removed again
- headers can be replaced
- headers can be looked up
- http/1.1 formatting into a `dynbuf`
- configured at init() with limits on header counts and total string
sizes
- use case: pass a HTTP request or response around without being version
specific
- express a HTTP request without a curl easy handle (used in h2 proxy
tunnels)
- future extension possibilities:
- conversions of `dynhds` to nghttp2/nghttp3 name+value arrays
Closes#10720
New cfilter HTTP-CONNECT for h3/h2/http1.1 eyeballing.
- filter is installed when `--http3` in the tool is used (or
the equivalent CURLOPT_ done in the library)
- starts a QUIC/HTTP/3 connect right away. Should that not
succeed after 100ms (subject to change), a parallel attempt
is started for HTTP/2 and HTTP/1.1 via TCP
- both attempts are subject to IPv6/IPv4 eyeballing, same
as happens for other connections
- tie timeout to the ip-version HAPPY_EYEBALLS_TIMEOUT
- use a `soft` timeout at half the value. When the soft timeout
expires, the HTTPS-CONNECT filter checks if the QUIC filter
has received any data from the server. If not, it will start
the HTTP/2 attempt.
HTTP/3(ngtcp2) improvements.
- setting call_data in all cfilter calls similar to http/2 and vtls filters
for use in callback where no stream data is available.
- returning CURLE_PARTIAL_FILE for prematurely terminated transfers
- enabling pytest test_05 for h3
- shifting functionality to "connect" UDP sockets from ngtcp2
implementation into the udp socket cfilter. Because unconnected
UDP sockets are weird. For example they error when adding to a
pollset.
HTTP/3(quiche) improvements.
- fixed upload bug in quiche implementation, now passes 251 and pytest
- error codes on stream RESET
- improved debug logs
- handling of DRAIN during connect
- limiting pending event queue
HTTP/2 cfilter improvements.
- use LOG_CF macros for dynamic logging in debug build
- fix CURLcode on RST streams to be CURLE_PARTIAL_FILE
- enable pytest test_05 for h2
- fix upload pytests and improve parallel transfer performance.
GOAWAY handling for ngtcp2/quiche
- during connect, when the remote server refuses to accept new connections
and closes immediately (so the local conn goes into DRAIN phase), the
connection is torn down and a another attempt is made after a short grace
period.
This is the behaviour observed with nghttpx when we tell it to shut
down gracefully. Tested in pytest test_03_02.
TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).
- new tests/tests-httpd/scorecard.py for testing h3/h2 protocol implementation.
Invoke:
python3 tests/tests-httpd/scorecard.py --help
for usage.
Improvements on gathering connect statistics and socket access.
- new CF_CTRL_CONN_REPORT_STATS cfilter control for having cfilters
report connection statistics. This is triggered when the connection
has completely connected.
- new void Curl_pgrsTimeWas(..) method to report a timer update with
a timestamp of when it happend. This allows for updating timers
"later", e.g. a connect statistic after full connectivity has been
reached.
- in case of HTTP eyeballing, the previous changes will update
statistics only from the filter chain that "won" the eyeballing.
- new cfilter query CF_QUERY_SOCKET for retrieving the socket used
by a filter chain.
Added methods Curl_conn_cf_get_socket() and Curl_conn_get_socket()
for convenient use of this query.
- Change VTLS backend to query their sub-filters for the socket when
checks during the handshake are made.
HTTP/3 documentation on how https eyeballing works.
TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).
Scorecard with Caddy.
- configure can be run with `--with-test-caddy=path` to specify which caddy to use for testing
- tests/tests-httpd/scorecard.py now measures download speeds with caddy
pytest improvements
- adding Makfile to clean gen dir
- adding nghttpx rundir creation on start
- checking httpd version 2.4.55 for test_05 cases where it is needed. Skipping with message if too old.
- catch exception when checking for caddy existance on system.
Closes#10349
- new functions and macros for cfilter debugging
- set CURL_DEBUG with names of cfilters where debug logging should be
enabled
- use GNUC __attribute__ to enable printf format checks during compile
Closes#10271
- quiche in debug mode did not build, fixed.
- moved all vquic implementation files to prefix curl_* to avoid
the potential mixups between provided .h files and our own.
- quich passes test 2500 and 2502. 2501, the POST, fail with
the body being rejected. Quich bug?
Closes#10242
- they are mostly pointless in all major jurisdictions
- many big corporations and projects already don't use them
- saves us from pointless churn
- git keeps history for us
- the year range is kept in COPYING
checksrc is updated to allow non-year using copyright statements
Closes#10205
Refactoring of connection setup and happy eyeballing. Move
nghttp2. ngtcp2, quiche and msh3 into connection filters.
- eyeballing cfilter that uses sub-filters for performing parallel connects
- socket cfilter for all transport types, including QUIC
- QUIC implementations in cfilter, can now participate in eyeballing
- connection setup is more dynamic in order to adapt to what filter did
really connect. Relevant to see if a SSL filter needs to be added or
if SSL has already been provided
- HTTP/3 test cases similar to HTTP/2
- multiuse of parallel transfers for HTTP/3, tested for ngtcp2 and quiche
- Fix for data attach/detach in VTLS filters that could lead to crashes
during parallel transfers.
- Eliminating setup() methods in cfilters, no longer needed.
- Improving Curl_conn_is_alive() to replace Curl_connalive() and
integrated ssl alive checks into cfilter.
- Adding CF_CNTRL_CONN_INFO_UPDATE to tell filters to update
connection into and persist it at the easy handle.
- Several more cfilter related cleanups and moves:
- stream_weigth and dependency info is now wrapped in struct
Curl_data_priority
- Curl_data_priority members depend is available in HTTP2|HTTP3
- Curl_data_priority members depend on NGHTTP2 support
- handling init/reset/cleanup of priority part of url.c
- data->state.priority same struct, but shallow copy for compares only
- PROTOPT_STREAM has been removed
- Curl_conn_is_mulitplex() now available to check on capability
- Adding query method to connection filters.
- ngtcp2+quiche: implementing query for max concurrent transfers.
- Adding is_alive and keep_alive cfilter methods. Adding DATA_SETUP event.
- setting keepalive timestamp on connect
- DATA_SETUP is called after the connection has been completely
setup (but may not connected yet) to allow filters to initialize
data members they use.
- there is no socket to be had with msh3, it is unclear how select
shall work
- manual test via "curl --http3 https://curl.se" fail with "empty
reply from server".
- Various socket/conn related cleanups:
- Curl_socket is now Curl_socket_open and in cf-socket.c
- Curl_closesocket is now Curl_socket_close and in cf-socket.c
- Curl_ssl_use has been replaced with Cur_conn_is_ssl
- Curl_conn_tcp_accepted_set has been split into
Curl_conn_tcp_listen_set and Curl_conn_tcp_accepted_set
with a clearer purpose
Closes#10141
- general construct/destroy in connectdata
- default implementations of callback functions
- connect: cfilters for connect and accept
- socks: cfilter for socks proxying
- http_proxy: cfilter for http proxy tunneling
- vtls: cfilters for primary and proxy ssl
- change in general handling of data/conn
- Curl_cfilter_setup() sets up filter chain based on data settings,
if none are installed by the protocol handler setup
- Curl_cfilter_connect() boot straps filters into `connected` status,
used by handlers and multi to reach further stages
- Curl_cfilter_is_connected() to check if a conn is connected,
e.g. all filters have done their work
- Curl_cfilter_get_select_socks() gets the sockets and READ/WRITE
indicators for multi select to work
- Curl_cfilter_data_pending() asks filters if the have incoming
data pending for recv
- Curl_cfilter_recv()/Curl_cfilter_send are the general callbacks
installed in conn->recv/conn->send for io handling
- Curl_cfilter_attach_data()/Curl_cfilter_detach_data() inform filters
and addition/removal of a `data` from their connection
- adding vtl functions to prevent use of Curl_ssl globals directly
in other parts of the code.
Reviewed-by: Daniel Stenberg
Closes#9855
For both IPv4 and IPv6 addresses. Now also checks IPv6 addresses "correctly"
and not with string comparisons.
Split out the noproxy checks and functionality into noproxy.c
Added unit test 1614 to verify checking functions.
Reported-by: Mathieu Carbonneaux
Fixes#9773Fixes#5745Closes#9775
This header is for providing the argument types for recv() and send()
when built to not use a dedicated config-[platfor].h file.
Remove the slow brute-force checks from configure and cmake.
This change also removes the use of the types for select, as they were
not used in code.
Closes#9592
Slightly faster with more robust code. Uses fewer and smaller mallocs.
- remove two fields from the URL handle struct
- reduce copies and allocs
- use dynbuf buffers more instead of custom malloc + copies
- uses dynbuf to build the host name in reduces serial alloc+free within
the same function.
- move dedotdotify into urlapi.c and make it static, not strdup the input
and optimize it by checking for . and / before using strncmp
- remove a few strlen() calls
- add Curl_dyn_setlen() that can "trim" an existing dynbuf
Closes#9408
This no longer provide functions, only macros. Runs faster and produces
smaller output.
The biggest precaution this change brings:
DO NOT use post/pre-increments when passing arguments to the macros.
Closes#9429
Add licensing and copyright information for all files in this repository. This
either happens in the file itself as a comment header or in the file
`.reuse/dep5`.
This commit also adds a Github workflow to check pull requests and adapts
copyright.pl to the changes.
Closes#8869
Also move timediff_t definitions from timeval.h to timediff.h and
then make timeval.h include the new standalone-capable timediff.h.
Reviewed-by: Jay Satiro
Reviewed-by: Daniel Stenberg
Supersedes #5888Closes#8595
Mesalink has ceased development. We can no longer encourage use of it.
It seems to be continued under the name TabbySSL, but no attempts have
(yet) been to make curl support it.
Fixes#8188Closes#8191
A struct bufref holds a buffer pointer, a data size and a destructor.
When freed or its contents are changed, the previous buffer is implicitly
released by the associated destructor. The data size, although not used
internally, allows binary data support.
A unit test checks its handling methods: test 1661
Closes#6654
It is a security process for HTTP.
It doesn't seems to be standard, but it is used by some cloud providers.
Aws:
https://docs.aws.amazon.com/general/latest/gr/signature-version-4.html
Outscale:
https://wiki.outscale.net/display/EN/Creating+a+Canonical+Request
GCP (I didn't test that this code work with GCP though):
https://cloud.google.com/storage/docs/access-control/signing-urls-manually
most of the code is in lib/http_v4_signature.c
Information require by the algorithm:
- The URL
- Current time
- some prefix that are append to some of the signature parameters.
The data extracted from the URL are: the URI, the region,
the host and the API type
example:
https://api.eu-west-2.outscale.com/api/latest/ReadNets
~~~ ~~~~~~~~ ~~~~~~~~~~~~~~~~~~~
^ ^ ^
/ \ URI
API type region
Small description of the algorithm:
- make canonical header using content type, the host, and the date
- hash the post data
- make canonical_request using custom request, the URI,
the get data, the canonical header, the signed header
and post data hash
- hash canonical_request
- make str_to_sign using one of the prefix pass in parameter,
the date, the credential scope and the canonical_request hash
- compute hmac from date, using secret key as key.
- compute hmac from region, using above hmac as key
- compute hmac from api_type, using above hmac as key
- compute hmac from request_type, using above hmac as key
- compute hmac from str_to_sign using above hmac as key
- create Authorization header using above hmac, prefix pass in parameter,
the date, and above hash
Signed-off-by: Matthias Gatto <matthias.gatto@outscale.com>
Closes#5703
- enable in the build (configure)
- header parsing
- host name lookup
- unit tests for the above
- CI build
- CURL_VERSION_HSTS bit
- curl_version_info support
- curl -V output
- curl-config --features
- CURLOPT_HSTS_CTRL
- man page for CURLOPT_HSTS_CTRL
- curl --hsts (sets CURLOPT_HSTS_CTRL and works with --libcurl)
- man page for --hsts
- save cache to disk
- load cache from disk
- CURLOPT_HSTS
- man page for CURLOPT_HSTS
- added docs/HSTS.md
- fixed --version docs
- adjusted curl_easy_duphandle
Closes#5896
