Since each socket hash entry may themselves have a hash table in them,
the destroying of the socket hash needs to make sure all the subhashes
are also correctly destroyed to avoid leaking memory.
Fixes#8129Closes#8131
The callbacks were partially documented to support this. Now the
behavior is documented and returning error from either of these
callbacks will effectively kill all currently ongoing transfers.
Added test 530 to verify
Reported-by: Marcelo Juchem
Fixes#8083Closes#8089
Triggered before a request is made but after a connection is set up
Changes:
- callback: Update docs and callback for pre-request callback
- Add documentation for CURLOPT_PREREQDATA and CURLOPT_PREREQFUNCTION,
- Add redirect test and callback failure test
- Note that the function may be called multiple times on a redirection
- Disable new 2086 test due to Windows weirdness
Closes#7477
The VALID_SOCK() macro was made to only check for FD_SETSIZE if curl was
built to use select(), even though the curl_multi_fdset() function
always and unconditionally uses FD_SET and needs the check.
Reported-by: 0xee on github
Fixes#7718Closes#7719
- the data needs to be "line-based" anyway since it's also passed to the
debug callback/application
- it makes infof() work like failf() and consistency is good
- there's an assert that triggers on newlines in the format string
- Also removes a few instances of "..."
- Removes the code that would append "..." to the end of the data *iff*
it was truncated in infof()
Closes#7357
- Check whether a connection has succeded before checking whether it's
timed out.
This means if we've connected quickly, but subsequently been
descheduled, we allow the connection to succeed. Note, if we timeout,
but between checking the timeout, and connecting to the server the
connection succeeds, we will allow it to go ahead. This is viewed as
an acceptable trade off.
- Add additional failf logging around failed connection attempts to
propogate the cause up to the caller.
Co-Authored-by: Martin Howarth
Closes#7178
scan-build-6 otherwise warns, saying: warning: The left operand of '>='
is a garbage value otherwise, which is false.
Later scan-builds don't claim this on the same code.
Closes#7248
The libssh2 backend has SSH session associated with the connection but
the callback context is the easy handle, so when a connection gets
attached to a transfer, the protocol handler now allows for a custom
function to get used to set things up correctly.
Reported-by: Michael O'Farrell
Fixes#6898Closes#7078
Also added 'CURL_SMALLSENDS' to make Curl_write() send short packets,
which helped verifying this even more.
Add test 363 to verify.
Reported-by: ustcqidi on github
Fixes#6950Closes#7024
Reset FD_WRITE by sending zero bytes which is permissible
and will be treated by implementations as successful send.
Without this we won't be notified in case a socket is still
writable if we already received such a notification and did
not send any data afterwards on the socket. This would lead
to waiting forever on a writable socket being writable again.
Assisted-by: Tommy Odom
Reviewed-by: Jay Satiro
Reviewed-by: Marcel Raad
Tested-by: tmkk on github
Bug: #6146Closes#6245
1. Consolidate pre-checks into a single Curl_poll call:
This is an attempt to restructure the code in Curl_multi_wait
in such a way that less syscalls are made by removing individual
calls to Curl_socket_check via SOCKET_READABLE/SOCKET_WRITABLE.
2. Avoid resetting the WinSock event multiple times:
We finally call WSAResetEvent anyway, so specifying it as
an optional parameter to WSAEnumNetworkEvents is redundant.
3. Wakeup directly in case no sockets are being monitoring:
Fix the WinSock based implementation to skip extra waiting by
not sleeping in case no sockets are to be waited on and just
the WinSock event is being monitored for wakeup functionality.
Assisted-by: Tommy Odom
Reviewed-by: Jay Satiro
Reviewed-by: Marcel Raad
Bug: #6146Closes#6245
This reverts commit 2260e0ebe6,
also restoring previous follow up changes which were reverted.
Authored-by: rcombs on github
Authored-by: Marc Hörsken
Reviewed-by: Jay Satiro
Reviewed-by: Marcel Raad
Restores #5634
Reverts #6281
Part of #6245
The ConnectionExists() function will note that the new transfer wants
less then h2 and that it can't multiplex it and therefor opt to open a
new connection instead.
Storing a stream error in the per-connection struct was an error that lead to
race conditions as subsequent stream handling could overwrite the error code
before it was used for the stream with the actual problem.
Closes#6910
Both were used for the same purposes and there was no logical separation
between them. Combined, this also saves 16 bytes in less holes in my
test build.
Closes#6798
Otherwise libcurl is likely to reuse the connection again in the next
attempt since the connection reuse logic doesn't take downgrades into
account.
Reported-by: Anthony Ramine
Fixes#6788Closes#6793
... since the state machine might go to RATELIMITING and then back to
PERFORMING doing once-per-transfer inits in that function is wrong and
it caused problems with receiving chunked HTTP and it set the
PRETRANSFER time much too often...
Regression from b68dc34af3 (shipped in 7.75.0)
Reported-by: Amaury Denoyelle
Fixes#6640Closes#6641
While working on documenting the states it dawned on me that step one is
to use more descriptive names on the states. This also changes prefix on
the states to make them shorter in the source.
State names NOT ending with *ing are transitional ones.
Closes#6612
The Curl_easy pointer struct entry in connectdata is now gone. Just
before commit 215db086e0 landed on January 8, 2021 there were 919
references to conn->data.
Closes#6608
Rename it to 'httpwant' and make a cloned field in the state struct as
well for run-time updates.
Also: refuse non-supported HTTP versions. Verified with test 129.
Closes#6585
- Reorder some internal struct members so that less padding is used.
This is an attempt at saving a bit of space by packing some structs
(using pahole to find the holes) where it might make sense to do
so without losing readability.
I.e., I tried to avoid separating fields that seem grouped
together (like the cwd... fields in struct ftp_conn for instance).
Also abstained from touching fields behind conditional macros as
that quickly can get complicated.
Closes https://github.com/curl/curl/pull/6483
By making the `magic` identifier the same size and at the same place
within the structs (easy, multi, share), libcurl will be able to more
reliably detect and safely error out if an application passes in the
wrong handle to APIs. Easier to detect and less likely to cause crashes
if done.
Such mixups can't be detected at compile-time due to them being
typedefed void pointers - unless `CURL_STRICTER` is defined.
Closes#6484
... in most cases instead of 'struct connectdata *' but in some cases in
addition to.
- We mostly operate on transfers and not connections.
- We need the transfer handle to log, store data and more. Everything in
libcurl is driven by a transfer (the CURL * in the public API).
- This work clarifies and separates the transfers from the connections
better.
- We should avoid "conn->data". Since individual connections can be used
by many transfers when multiplexing, making sure that conn->data
points to the current and correct transfer at all times is difficult
and has been notoriously error-prone over the years. The goal is to
ultimately remove the conn->data pointer for this reason.
Closes#6425
... instead of at end of the DO state. This makes the timer more
accurate for the protocols that use the DOING state (such as FTP), and
simplifies how the function (now called init_perform) is called.
The timer will then include the entire procedure up to PERFORM -
including all instructions for getting the transfer started.
Closes#6454
When doing HTTP authentication and a port number set with CURLOPT_PORT,
the code would previously have the URL's port number override as if it
had been a redirect to an absolute URL.
Added test 1568 to verify.
Reported-by: UrsusArctos on github
Fixes#6397Closes#6400
When failing in TOOFAST, the multi_done() wasn't called so the same
cleanup and handling wasn't done like when it fails in PERFORM, which in
the case of FTP could mean that the control connection wouldn't be
marked as "dead" for the CURLE_ABORTED_BY_CALLBACK case. Which caused
ftp_disconnect() to use it to send "QUIT", which could end up waiting
for a response a long time before giving up!
Reported-by: Tomas Berger
Fixes#6333Closes#6337
This reverts commit d2a7d7c185.
This commit also reverts the subsequent follow-ups to that commit, which
were all done within windows #ifdefs that are removed in this
change. Marc helped me verify this.
Fixes#6146Closes#6281
Also skip pre-checking sockets to set timeout_ms to 0
after the first socket has been detected to be ready.
Reviewed-by: rcombs on github
Reviewed-by: Daniel Stenberg
Follow up to #5886
Since the struct is quite large (1 long and 10 ints) we
declare it once at the beginning of the function instead
of multiple times inside loops to avoid stack movements.
Reviewed-by: Viktor Szakats
Reviewed-by: Daniel Stenberg
Closes#5886
Learn from the way Cygwin handles and maps the WinSock events
to simulate correct and complete poll and select behaviour
according to Richard W. Stevens Network Programming book.
Reviewed-by: Jay Satiro
Reviewed-by: Marcel Raad
Follow up to #5634Closes#5867
Setting a timeout to INT_MAX could cause an immediate error to get
returned as timeout because of an overflow when different values of
'now' were used.
This is primarily fixed by having Curl_pgrsTime() return the "now" when
TIMER_STARTSINGLE is set so that the parent function will continue using
that time.
Reported-by: Ionuț-Francisc Oancea
Fixes#5583Closes#5847
Check readiness of all sockets before waiting on them
to avoid locking in case the one-time event FD_WRITE
was already consumed by a previous wait operation.
More information about WinSock network events:
https://docs.microsoft.com/en-us/windows/win32/api/
winsock2/nf-winsock2-wsaeventselect#return-value
Closes#5634
This avoids using a pair of TCP ports to provide wakeup functionality
for every multi instance on Windows, where socketpair() is emulated
using a TCP socket on loopback which could in turn lead to socket
resource exhaustion.
A previous version of this patch failed to account for how in WinSock,
FD_WRITE is set only once when writing becomes possible and not again
until after a send has failed due to the buffer filling. This contrasts
to how FD_READ and FD_OOB continue to be set until the conditions they
refer to no longer apply. This meant that if a user wrote some data to
a socket, but not enough data to completely fill its send buffer, then
waited on that socket to become writable, we'd erroneously stall until
their configured timeout rather than returning immediately.
This version of the patch addresses that issue by checking each socket
we're waiting on to become writable with select() before the wait, and
zeroing the timeout if it's already writable.
Assisted-by: Marc Hörsken
Reviewed-by: Marcel Raad
Reviewed-by: Daniel Stenberg
Tested-by: Gergely Nagy
Tested-by: Rasmus Melchior Jacobsen
Tested-by: Tomas Berger
Replaces #5397
Reverts #5632Closes#5634
Previously any connect-only connections in a multi handle would be kept
alive until the multi handle was closed. Since these connections cannot
be re-used, they can be marked for closure when the associated easy
handle is removed from the multi handle.
Closes#5749
Follow-up to c4e6968127
When a new transfer is created, as a resuly of an acknowledged push,
that transfer needs a download buffer allocated.
Closes#5590
This avoids using a pair of TCP ports to provide wakeup functionality
for every multi instance on Windows, where socketpair() is emulated
using a TCP socket on loopback which could in turn lead to socket
resource exhaustion.
Reviewed-by: Gergely Nagy
Reviewed-by: Marc Hörsken
Closes#5397
Now that all functions in select.[ch] take timediff_t instead
of the limited int or long, we can remove type conversions
and related preprocessor checks to silence compiler warnings.
Avoiding conversions from time_t was already done in 842f73de.
Based upon #5262
Supersedes #5214, #5220 and #5221
Follow up to #5343 and #5479Closes#5490
... and free it as soon as the transfer is done. It removes the extra
alloc when a new size is set with setopt() and reduces memory for unused
easy handles.
In addition: the closure_handle now doesn't use an allocated buffer at
all but the smallest supported size as a stack based one.
Closes#5472
A common set of functions instead of many separate implementations for
creating buffers that can grow when appending data to them. Existing
functionality has been ported over.
In my early basic testing, the total number of allocations seem at
roughly the same amount as before, possibly a few less.
See docs/DYNBUF.md for a description of the API.
Closes#5300
More connection cache accesses are protected by locks.
CONNCACHE_* is a beter prefix for the connection cache lock macros.
Curl_attach_connnection: now called as soon as there's a connection
struct available and before the connection is added to the connection
cache.
Curl_disconnect: now assumes that the connection is already removed from
the connection cache.
Ref: #4915Closes#5009
- If an easy handle is owned by a multi different from the one specified
then return CURLM_BAD_EASY_HANDLE.
Prior to this change I assume user error could cause corruption.
Closes https://github.com/curl/curl/pull/5116
- Don't check errno on wakeup socket if sread returned 0 since sread
doesn't set errno in that case.
This is a follow-up to cf7760a from several days ago which fixed
Curl_multi_wait to stop busy looping sread on the non-blocking wakeup
socket if it was closed (ie sread returns 0). Due to a logic error it
was still possible to busy loop in that case if errno == EINTR.
Closes https://github.com/curl/curl/pull/5047
- Do not say that conn->data is "cleared" by multi_done().
If the connection is in use then multi_done assigns another easy handle
still using the connection to conn->data, therefore in that case it is
not cleared.
Closes https://github.com/curl/curl/pull/4901
... since the current transfer is being killed. Setting to NULL is
wrong, leaving it pointing to 'data' is wrong since that handle might be
about to get freed.
Fixes#4845Closes#4858
Reported-by: dmitrmax on github
Previously it was stored in a global state which contributed to
curl_global_init's thread unsafety. This boolean is now instead figured
out in curl_multi_init() and stored in the multi handle. Less effective,
but thread safe.
Closes#4851
A regression made the code use 'multiplexed' as a boolean instead of the
counter it is intended to be. This made curl try to "over-populate"
connections with new streams.
This regression came with 41fcdf71a1, shipped in curl 7.65.0.
Also, respect the CURLMOPT_MAX_CONCURRENT_STREAMS value in the same
check.
Reported-by: Kunal Ekawde
Fixes#4779Closes#4784
It could accidentally let the connection get used by more than one
thread, leading to double-free and more.
Reported-by: Christopher Reid
Fixes#4544Closes#4557
This commit adds curl_multi_wakeup() which was previously in the TODO
list under the curl_multi_unblock name.
On some platforms and with some configurations this feature might not be
available or can fail, in these cases a new error code
(CURLM_WAKEUP_FAILURE) is returned from curl_multi_wakeup().
Fixes#4418Closes#4608
Prior to this change:
The check if an extra wait is necessary was based not on the
number of extra fds but on the pointer.
If a non-null pointer was given in extra_fds, but extra_nfds
was zero, then the wait was skipped even though poll was not
called.
Closes https://github.com/curl/curl/pull/4610
Since 59041f0, a new timer might be set in multi_done() so the clearing
of the timers need to happen afterwards!
Reported-by: Max Kellermann
Fixes#4575Closes#4583
Repeatedly we see problems where using curl_multi_wait() is difficult or
just awkward because if it has no file descriptor to wait for
internally, it returns immediately and leaves it to the caller to wait
for a small amount of time in order to avoid occasional busy-looping.
This is often missed or misunderstood, leading to underperforming
applications.
This change introduces curl_multi_poll() as a replacement drop-in
function that accepts the exact same set of arguments. This function
works identically to curl_multi_wait() - EXCEPT - for the case when
there's nothing to wait for internally, as then this function will by
itself wait for a "suitable" short time before it returns. This
effectiely avoids all risks of busy-looping and should also make it less
likely that apps "over-wait".
This also changes the curl tool to use this funtion internally when
doing parallel transfers and changes curl_easy_perform() to use it
internally.
Closes#4163
It was used (intended) to pass in the size of the 'socks' array that is
also passed to these functions, but was rarely actually checked/used and
the array is defined to a fixed size of MAX_SOCKSPEREASYHANDLE entries
that should be used instead.
Closes#4169
Curl_disconnect bails out if conn->easyq is not empty, detach_connection
needs to be called first to remove the current easy from the queue.
Fixes#4144Closes#4151
- The transfer hashes weren't using the correct keys so removing entries
failed.
- Simplified the iteration logic over transfers sharing the same socket and
they now simply are set to expire and thus get handled in the "regular"
timer loop instead.
Reported-by: Tom van der Woerdt
Fixes#4012Closes#4014
Since more than one socket can be used by each transfer at a given time,
each sockhash entry how has its own hash table with transfers using that
socket.
In addition, the sockhash entry can now be marked 'blocked = TRUE'"
which then makes the delete function just set 'removed = TRUE' instead
of removing it "for real", as a way to not rip out the carpet under the
feet of a parent function that iterates over the transfers of that same
sockhash entry.
Reported-by: Tom van der Woerdt
Fixes#3961Fixes#3986Fixes#3995Fixes#4004Closes#3997
... so that timeouts or other state machine actions get going again
after a changing pause state. For example, if the last delivery was
paused there's no pending socket activity.
Reported-by: sstruchtrup on github
Fixes#3994Closes#4001
An inner loop within the singlesocket() function wrongly re-used the
variable for the outer loop which then could cause an infinite
loop. Change to using a separate variable!
Reported-by: Eric Wu
Fixes#3970Closes#3973
They need to be removed from the socket hash linked list with more care.
When sh_delentry() is called to remove a sockethash entry, remove all
individual transfers from the list first. To enable this, each Curl_easy struct
now stores a pointer to the sockethash entry to know how to remove itself.
Reported-by: Tom van der Woerdt and Kunal Ekawde
Fixes#3952Fixes#3904Closes#3953
They serve very little purpose and mostly just add noise. Most of them
have been around for a very long time. I read them all before removing
or rephrasing them.
Ref: #3876Closes#3883
Codacy/CppCheck warns about this. Consistently use parentheses as we
already do in some places to silence the warning.
Closes https://github.com/curl/curl/pull/3866
This reverts commit b0972bc.
- No longer show verbose output for the conncache closure handle.
The offending commit was added so that the conncache closure handle
would inherit verbose mode from the user's easy handle. (Note there is
no way for the user to set options for the closure handle which is why
that was necessary.) Other debug settings such as the debug function
were not also inherited since we determined that could lead to crashes
if the user's per-handle private data was used on an unexpected handle.
The reporter here says he has a debug function to capture the verbose
output, and does not expect or want any output to stderr; however
because the conncache closure handle does not inherit the debug function
the verbose output for that handle does go to stderr.
There are other plausible scenarios as well such as the user redirects
stderr on their handle, which is also not inherited since it could lead
to crashes when used on an unexpected handle.
Short of allowing the user to set options for the conncache closure
handle I don't think there's much we can safely do except no longer
inherit the verbose setting.
Bug: https://curl.haxx.se/mail/lib-2019-05/0021.html
Reported-by: Kristoffer Gleditsch
Ref: https://github.com/curl/curl/pull/3598
Ref: https://github.com/curl/curl/pull/3618
Closes https://github.com/curl/curl/pull/3856
As soon as a TLS backend gets ALPN conformation about the specific HTTP
version it can now set the multiplex situation for the "bundle" and
trigger moving potentially queued up transfers to the CONNECT state.
With transfers being queued up, we only move one at a a time back to the
CONNECT state but now we mark moved transfers so that when a moved
transfer is confirmed "successful" (it connected) it will trigger the
move of another pending transfer. Previously, it would otherwise wait
until the transfer was done before doing this. This makes queued up
pending transfers get processed (much) faster.
Remove the code too. The functionality has been disabled in code since
7.62.0. Setting this option will from now on simply be ignored and have
no function.
Closes#3654
Fixes#3745Closes#3746
The following snippet
```
int main()
{
CURL* hCurlHandle = curl_easy_init();
curl_easy_setopt(hCurlHandle, CURLOPT_URL, "http://example.com");
curl_easy_setopt(hCurlHandle, CURLOPT_PROXY, "1");
curl_easy_perform(hCurlHandle);
curl_easy_cleanup(hCurlHandle);
return 0;
}
```
triggers the following Valgrind warning
```
==4125== Invalid read of size 8
==4125== at 0x4E7D1EE: Curl_llist_remove (llist.c:97)
==4125== by 0x4E7EF5C: detach_connnection (multi.c:798)
==4125== by 0x4E80545: multi_runsingle (multi.c:1451)
==4125== by 0x4E8197C: curl_multi_perform (multi.c:2072)
==4125== by 0x4E766A0: easy_transfer (easy.c:625)
==4125== by 0x4E76915: easy_perform (easy.c:719)
==4125== by 0x4E7697C: curl_easy_perform (easy.c:738)
==4125== by 0x4008BE: main (in /home/even/curl/test)
==4125== Address 0x9b3d1d0 is 1,120 bytes inside a block of size 1,600 free'd
==4125== at 0x4C2ECF0: free (vg_replace_malloc.c:530)
==4125== by 0x4E62C36: conn_free (url.c:756)
==4125== by 0x4E62D34: Curl_disconnect (url.c:818)
==4125== by 0x4E48DF9: Curl_once_resolved (hostip.c:1097)
==4125== by 0x4E8052D: multi_runsingle (multi.c:1446)
==4125== by 0x4E8197C: curl_multi_perform (multi.c:2072)
==4125== by 0x4E766A0: easy_transfer (easy.c:625)
==4125== by 0x4E76915: easy_perform (easy.c:719)
==4125== by 0x4E7697C: curl_easy_perform (easy.c:738)
==4125== by 0x4008BE: main (in /home/even/curl/test)
==4125== Block was alloc'd at
==4125== at 0x4C2F988: calloc (vg_replace_malloc.c:711)
==4125== by 0x4E6438E: allocate_conn (url.c:1654)
==4125== by 0x4E685B4: create_conn (url.c:3496)
==4125== by 0x4E6968F: Curl_connect (url.c:4023)
==4125== by 0x4E802E7: multi_runsingle (multi.c:1368)
==4125== by 0x4E8197C: curl_multi_perform (multi.c:2072)
==4125== by 0x4E766A0: easy_transfer (easy.c:625)
==4125== by 0x4E76915: easy_perform (easy.c:719)
==4125== by 0x4E7697C: curl_easy_perform (easy.c:738)
==4125== by 0x4008BE: main (in /home/even/curl/test)
```
This has been bisected to commit 2f44e94
Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=14109
Credit to OSS Fuzz
* Adjusted unit tests 2056, 2057
* do not generally close connections with CURLAUTH_NEGOTIATE after every request
* moved negotiatedata from UrlState to connectdata
* Added stream rewind logic for CURLAUTH_NEGOTIATE
* introduced negotiatedata::GSS_AUTHDONE and negotiatedata::GSS_AUTHSUCC
* Consider authproblem state for CURLAUTH_NEGOTIATE
* Consider reuse_forbid for CURLAUTH_NEGOTIATE
* moved and adjusted negotiate authentication state handling from
output_auth_headers into Curl_output_negotiate
* Curl_output_negotiate: ensure auth done is always set
* Curl_output_negotiate: Set auth done also if result code is
GSS_S_CONTINUE_NEEDED/SEC_I_CONTINUE_NEEDED as this result code may
also indicate the last challenge request (only works with disabled
Expect: 100-continue and CURLOPT_KEEP_SENDING_ON_ERROR -> 1)
* Consider "Persistent-Auth" header, detect if not present;
Reset/Cleanup negotiate after authentication if no persistent
authentication
* apply changes introduced with #2546 for negotiate rewind logic
Fixes#1261Closes#1975
This code was once used for the non multi-interface using code path, but
ever since easy_perform was turned into a wrapper around the multi
interface, this code path never runs.
Closes#3666
- Change closure handle to receive verbose setting from the easy handle
most recently added via curl_multi_add_handle.
The closure handle is a special easy handle used for closing cached
connections. It receives limited settings from the easy handle most
recently added to the multi handle. Prior to this change that did not
include verbose which was a problem because on connection shutdown
verbose mode was not acknowledged.
Ref: https://github.com/curl/curl/pull/3598
Co-authored-by: Daniel Stenberg
Closes https://github.com/curl/curl/pull/3618
Failing to do so would make the CURLINFO_TOTAL_TIME timeout to not get
updated correctly and could end up getting reported to the application
completely wrong (way too small).
Reported-by: accountantM on github
Fixes#3602Closes#3605
The variable wasn't properly reset within the loop and thus could remain
set for sockets that hadn't been set before and miss notifying the app.
This is a follow-up to 4c35574 (shipped in curl 7.64.0)
Reported-by: buzo-ffm on github
Detected-by: Jan Alexander Steffens
Fixes#3585Closes#3589
urlapi: turn three local-only functions into statics
conncache: make conncache_find_first_connection static
multi: make detach_connnection static
connect: make getaddressinfo static
curl_ntlm_core: make hmac_md5 static
http2: make two functions static
http: make http_setup_conn static
connect: make tcpnodelay static
tests: make UNITTEST a thing to mark functions with, so they can be static for
normal builds and non-static for unit test builds
... and mark Curl_shuffle_addr accordingly.
url: make up_free static
setopt: make vsetopt static
curl_endian: make write32_le static
rtsp: make rtsp_connisdead static
warnless: remove unused functions
memdebug: remove one unused function, made another static
We use "conn" everywhere to be a pointer to the connection.
Introduces two functions that "attaches" and "detaches" the connection
to and from the transfer.
Going forward, we should favour using "data->conn" (since a transfer
always only has a single connection or none at all) to "conn->data"
(since a connection can have none, one or many transfers associated with
it and updating conn->data to be correct is error prone and a frequent
reason for internal issues).
Closes#3442
Fixes#3436Closes#3448
Problem 1
After LOTS of scratching my head, I eventually realized that even when doing
10 uploads in parallel, sometimes the socket callback to the application that
tells it what to wait for on the socket, looked like it would reflect the
status of just the single transfer that just changed state.
Digging into the code revealed that this was indeed the truth. When multiple
transfers are using the same connection, the application did not correctly get
the *combined* flags for all transfers which then could make it switch to READ
(only) when in fact most transfers wanted to get told when the socket was
WRITEABLE.
Problem 1b
A separate but related regression had also been introduced by me when I
cleared connection/transfer association better a while ago, as now the logic
couldn't find the connection and see if that was marked as used by more
transfers and then it would also prematurely remove the socket from the socket
hash table even in times other transfers were still using it!
Fix 1
Make sure that each socket stored in the socket hash has a "combined" action
field of what to ask the application to wait for, that is potentially the ORed
action of multiple parallel transfers. And remove that socket hash entry only
if there are no transfers left using it.
Problem 2
The socket hash entry stored an association to a single transfer using that
socket - and when curl_multi_socket_action() was called to tell libcurl about
activities on that specific socket only that transfer was "handled".
This was WRONG, as a single socket/connection can be used by numerous parallel
transfers and not necessarily a single one.
Fix 2
We now store a list of handles in the socket hashtable entry and when libcurl
is told there's traffic for a particular socket, it now iterates over all
known transfers using that single socket.
Added Curl_resolver_kill() for all three resolver modes, which only
blocks when necessary, along with test 1592 to confirm
curl_multi_remove_handle() doesn't block unless it must.
Closes#3428Fixes#3371
Do not assume/store assocation between a given easy handle and the
connection if it can be avoided.
Long-term, the 'conn->data' pointer should probably be removed as it is a
little too error-prone. Still used very widely though.
Reported-by: masbug on github
Fixes#3391Closes#3400
The time_t type is unsigned on some systems and these variables are used
to hold return values from functions that return timediff_t
already. timediff_t is always a signed type.
Closes#3363
This is a companion patch to cbea2fd2c (NTLM: force the connection to
HTTP/1.1, 2018-12-06): with NTLM, we can switch to HTTP/1.1
preemptively. However, with other (Negotiate) authentication it is not
clear to this developer whether there is a way to make it work with
HTTP/2, so let's try HTTP/2 first and fall back in case we encounter the
error HTTP_1_1_REQUIRED.
Note: we will still keep the NTLM workaround, as it avoids an extra
round trip.
Daniel Stenberg helped a lot with this patch, in particular by
suggesting to introduce the Curl_h2_http_1_1_error() function.
Closes#3349
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
curl_multi_wait() was erroneously used from within
curl_easy_perform(). It could lead to it believing there was no socket
to wait for and then instead sleep for a while instead of monitoring the
socket and then miss acting on that activity as swiftly as it should
(causing an up to 1000 ms delay).
Reported-by: Antoni Villalonga
Fixes#3305Closes#3306Closes#3308
The function does not return the same value as snprintf() normally does,
so readers may be mislead into thinking the code works differently than
it actually does. A different function name makes this easier to detect.
Reported-by: Tomas Hoger
Assisted-by: Daniel Gustafsson
Fixes#3296Closes#3297
When using c-ares for asyn dns, the dns socket fd was silently closed
by c-ares without curl being aware. curl would then 'realize' the fd
has been removed at next call of Curl_resolver_getsock, and only then
notify the CURLMOPT_SOCKETFUNCTION to remove fd from its poll set with
CURL_POLL_REMOVE. At this point the fd is already closed.
By using ares socket state callback (ARES_OPT_SOCK_STATE_CB), this
patch allows curl to be notified that the fd is not longer needed
for neither for write nor read. At this point by calling
Curl_multi_closed we are able to notify multi with CURL_POLL_REMOVE
before the fd is actually closed by ares.
In asyn-ares.c Curl_resolver_duphandle we can't use ares_dup anymore
since it does not allow passing a different sock_state_cb_data
Closes#3238
Curl_follow() no longer frees the string. Make sure it happens in the
caller function, like we normally handle allocations.
This bug was introduced with the use of the URL API internally, it has
never been in a release version
Reported-by: Dario Weißer
Closes#3149
