- adding tests using very large passwords in auth
- fixes general http sending to treat h3 like h2, and
not like http1.1
- eliminate H2_HEADER max definitions and use the commmon
DYN_HTTP_REQUEST everywhere, different limits do not help
- fix http2 handling of requests denied by nghttp2 on send
to immediately report the refused stream
Closes#11509
- refs #11426 where spurious stalls on large POST requests
are reported
- the issue seems to involve the following
* first stream on connection adds up to 64KB of POST
data, which is the max default HTTP/2 stream window size
transfer is set to HOLD
* initial SETTINGS from server arrive, enlarging the stream
window. But no WINDOW_UPDATE is received.
* curl stalls
- the fix un-HOLDs a stream on receiving SETTINGS, not
relying on a WINDOW_UPDATE from lazy servers
Closes#11450
- fix HTTP/2 check to not declare a connection dead when
the read attempt results in EAGAIN
- add H2-PROXY alive check as for HTTP/2 that was missing
and is needed
- add attach/detach around Curl_conn_is_alive() and remove
these in filter methods
- add checks for number of connections used in some test_10
proxy tunneling tests
Closes#11368
- refs #11357, where it was reported that HTTP/1.1 downgrades
no longer works
- fixed with suggested change
- added test_05_03 and a new handler in the curltest module
to reproduce that downgrades work
Fixes#11357Closes#11362
Reported-by: Jay Satiro
- fixes#11242 where 100% CPU on uploads was reported
- fixes possible stalls on last part of a request body when
that information could not be fully send on the connection
due to an EAGAIN
- applies the same EGAIN handling to HTTP/2 proxying
Reported-by: Sergey Alirzaev
Fixed#11242Closes#11342
- Use CURL_FORMAT_CURL_OFF_T where %zd was erroneously used for some
curl_off_t variables.
- Use %zu where %zd was erroneously used for some size_t variables.
Prior to this change some of the Windows CI tests were failing because
in Windows 32-bit targets have a 32-bit size_t and a 64-bit curl_off_t.
When %zd was used for some curl_off_t variables then only the lower
32-bits was read and the upper 32-bits would be read for part or all of
the next specifier.
Fixes https://github.com/curl/curl/issues/11327
Closes https://github.com/curl/curl/pull/11321
`max_recv_speed` is `curl_off_t`, so using `size_t` might result in
-Wconversion GCC warnings for 32-bit `size_t`. Visible in the NetBSD
ARM autobuilds.
Closes https://github.com/curl/curl/pull/11312
- add an `id` long to Curl_easy, -1 on init
- once added to a multi (or its own multi), it gets
a non-negative number assigned by the connection cache
- `id` is unique among all transfers using the same
cache until reaching LONG_MAX where it will wrap
around. So, not unique eternally.
- CURLINFO_CONN_ID returns the connection id attached to
data or, if none present, data->state.lastconnect_id
- variables and type declared in tool for write out
Closes#11185
Aka "jumbo" or "amalgamation" builds. It means to compile all sources
per target as a single C source. This is experimental.
You can enable it by passing `-DCMAKE_UNITY_BUILD=ON` to cmake.
It requires CMake 3.16 or newer.
It makes builds (much) faster, allows for better optimizations and tends
to promote less ambiguous code.
Also add a new AppVeyor CI job and convert an existing one to use
"unity" mode (one MSVC, one MinGW), and enable it for one macOS CI job.
Fix related issues:
- add missing include guard to `easy_lock.h`.
- rename static variables and functions (and a macro) with names reused
across sources, or shadowed by local variables.
- add an `#undef` after use.
- add a missing `#undef` before use.
- move internal definitions from `ftp.h` to `ftp.c`.
- `curl_memory.h` fixes to make it work when included repeatedly.
- stop building/linking curlx bits twice for a static-mode curl tool.
These caused doubly defined symbols in unity builds.
- silence missing extern declarations compiler warning for ` _CRT_glob`.
- fix extern declarations for `tool_freq` and `tool_isVistaOrGreater`.
- fix colliding static symbols in debug mode: `debugtime()` and
`statename`.
- rename `ssl_backend_data` structure to unique names for each
TLS-backend, along with the `ssl_connect_data` struct member
referencing them. This required adding casts for each access.
- add workaround for missing `[P]UNICODE_STRING` types in certain Windows
builds when compiling `lib/ldap.c`. To support "unity" builds, we had
to enable `SCHANNEL_USE_BLACKLISTS` for Schannel (a Windows
`schannel.h` option) _globally_. This caused an indirect inclusion of
Windows `schannel.h` from `ldap.c` via `winldap.h` to have it enabled
as well. This requires `[P]UNICODE_STRING` types, which is apperantly
not defined automatically (as seen with both MSVS and mingw-w64).
This patch includes `<subauth.h>` to fix it.
Ref: https://github.com/curl/curl/runs/13987772013
Ref: https://dev.azure.com/daniel0244/curl/_build/results?buildId=15827&view=logs&jobId=2c9f582d-e278-56b6-4354-f38a4d851906&j=2c9f582d-e278-56b6-4354-f38a4d851906&t=90509b00-34fa-5a81-35d7-5ed9569d331c
- tweak unity builds to compile `lib/memdebug.c` separately in memory
trace builds to avoid PP confusion.
- force-disable unity for test programs.
- do not compile and link libcurl sources to libtests _twice_ when libcurl
is built in static mode.
KNOWN ISSUES:
- running tests with unity builds may fail in cases.
- some build configurations/env may not compile in unity mode. E.g.:
https://ci.appveyor.com/project/curlorg/curl/builds/47230972/job/51wfesgnfuauwl8q#L250
Ref: https://github.com/libssh2/libssh2/issues/1034
Ref: https://cmake.org/cmake/help/latest/prop_tgt/UNITY_BUILD.html
Ref: https://en.wikipedia.org/wiki/Unity_buildCloses#11095
- leave transfer loop when --limit-rate is in effect and has
been received
- adjust stream window size to --limit-rate plus some slack
to make the server observe the pacing we want
- add test case to confirm behaviour
Closes#11115
- doing a POST with `--digest` does an override on the initial request
with `Content-Length: 0`, but the http2 filter was unaware of that
and expected the originally request body. It did therefore not
send a final DATA frame with EOF flag to the server.
- The fix overrides any initial notion of post size when the `done_send`
event is triggered by the transfer loop, leading to the EOF that
is necessary.
- refs #11194. The fault did not happen in testing, as Apache httpd
never tries to read the request body of the initial request,
sends the 401 reply and closes the stream. The server used in the
reported issue however tried to read the EOF and timed out on the
request.
Reported-by: Aleksander Mazur
Fixes#11194
Cloes #11200
- refs #11157 and #11175 where uploads get stuck or lead to RST streams
- fixes our h2 send behaviour to continue sending in the nghttp2 session
as long as it wants to. This will empty our send buffer as long as
the remote stream/connection window allows.
- in case the window is exhausted, the data remaining in the send buffer
will wait for a WINDOW_UPDATE from the server. Which is a socket event
that engages our transfer loop again
- the problem in the issue was that we did not exhaust the window, but
left data in the sendbuffer and no further socket events did happen.
The server was just waiting for us to send more.
- relatedly, there was an issue fixed that closing a stream with KEEP_HOLD
set kept the transfer from shutting down - as it should have - leading
to a timeout.
Closes#11176
Make send buffer smaller to have progress and "upload done" reporting
closer to reality. Fix handling of send "drain" condition to no longer
trigger once the transfer loop reports it is done sending. Also do not
trigger the send "drain" on RST streams.
Background:
- a upload stall was reported in #11157 that timed out
- test_07_33a reproduces a problem with such a stall if the
server 404s the request and RSTs the stream.
- test_07_33b verifies a successful PUT, using the parameters
from #11157 and checks success
Ref: #11157Closes#11165
This works around #11138, by doubling the limit, and should be a
relatively safe fix.
Ideally the buffer would grow as needed and there would be no need for a
limit? But that might be follow-up material.
Fixes#11138Closes#11139
Out of 415 labels throughout the code base, 86 of those labels were
not at the start of the line. Which means labels always at the start of
the line is the favoured style overall with 329 instances.
Out of the 86 labels not at the start of the line:
* 75 were indented with the same indentation level of the following line
* 8 were indented with exactly one space
* 2 were indented with one fewer indentation level then the following
line
* 1 was indented with the indentation level of the following line minus
three space (probably unintentional)
Co-Authored-By: Viktor Szakats
Closes#11134
- nghttp2 does not free connection level window flow for
aborted streams
- when closing transfers, make sure that any buffered
response data is "given back" to the flow control window
- add tests test_02_22 and test_02_23 to reproduce
Closes#11052
- fixes stalled connections
- Make the connection window large enough, so that there is
some room left should 99/100 streams be PAUSED by the application
Reported-by: Paweł Wegner
Fixes#10988Closes#11043
- Makefile support for building test specific clients in tests/http/clients
- auto-make of clients when invoking pytest
- added test_09_02 for server PUSH_PROMISEs using clients/h2-serverpush
- added test_02_21 for lib based downloads and pausing/unpausing transfers
curl url parser:
- added internal method `curl_url_set_authority()` for setting the
authority part of a url (used for PUSH_PROMISE)
http2:
- made logging of PUSH_PROMISE handling nicer
Placing python test requirements in requirements.txt files
- separate files to base test suite and http tests since use
and module lists differ
- using the files in the gh workflows
websocket test cases, fixes for we and bufq
- bufq: account for spare chunks in space calculation
- bufq: reset chunks that are skipped empty
- ws: correctly encode frames with 126 bytes payload
- ws: update frame meta information on first call of collect
callback that fills user buffer
- test client ws-data: some test/reporting improvements
Closes#11006
- just increasing the http/2 flow window does not necessarily
make a server send new data. It may already have exhausted
the window before
Closes#11005
- `drain` was used by http/2 and http/3 implementations to indicate
that the transfer requires send/recv independant from its socket
poll state. Intended as a counter, it was used as bool flag only.
- a similar mechanism exists on `connectdata->cselect_bits` where
specific protocols can indicate something similar, only for the
whole connection.
- `cselect_bits` are cleard in transfer.c on use and, importantly,
also set when the transfer loop expended its `maxloops` tries.
`drain` was not cleared by transfer and the http2/3 implementations
had to take care of that.
- `dselect_bits` is cleared *and* set by the transfer loop. http2/3
does no longer clear it, only set when new events happen.
This change unifies the handling of socket poll overrides, extending
`cselect_bits` by a easy handle specific value and a common treatment in
transfers.
Closes#11005
- with `--proxy-http2` allow h2 ALPN negotiation to
forward proxies
- applies to http: requests against a https: proxy only,
as https: requests will auto-tunnel
- adding a HTTP/1 request parser in http1.c
- removed h2h3.c
- using new request parser in nghttp2 and all h3 backends
- adding test 2603 for request parser
- adding h2 proxy test cases to test_10_*
scorecard.py: request scoring accidentally always run curl
with '-v'. Removed that, expect double numbers.
labeller: added http1.* and h2-proxy sources to detection
Closes#10967
- move all code handling HTTP/2 frames for a particular
stream into a separate function to keep from confusing
the call `data` with the stream `data`.
Closes#10924
- remove NGHTTP2 members of `struct HTTP`
- add `void *h2_ctx` to `struct HTTP`
- add `void *h3_ctx` to `struct HTTP`
- separate h2/h3 pointers are needed for eyeballing
- manage local stream_ctx in http implementations
Closes#10877
- eliminate receive loop in vtls to fill buffer. This may
lead to partial reads of data which is counter productive
- let http2 instead loop smarter to process pending network
data without transfer switches
scorecard improvements
- do not start caddy when only httpd is requested
- allow curl -v to stderr file on --curl-verbose
Closes#10891
- use bufq for send/receive of network data
- usd bufq for send/receive of stream data
- use HTTP/2 flow control with no-auto updates to control the
amount of data we are buffering for a stream
HTTP/2 stream window set to 128K after local tests, defined
code constant for now
- elminiating PAUSEing nghttp2 processing when receiving data
since a stream can now take in all DATA nghttp2 forwards
Improved scorecard and adjuste http2 stream window sizes
- scorecard improved output formatting and options default
- scorecard now also benchmarks small requests / second
Closes#10771
- use the defined, but so far not used, KEEP_SEND_HOLD bit for flow
control based suspend of sending in transfers.
Prior to this change KEEP_SEND_PAUSE bit was used instead, but that can
interfere with pausing streams from the user side via curl_easy_pause.
Fixes https://github.com/curl/curl/issues/10751
Closes https://github.com/curl/curl/pull/10753
RST and connection close were not handled correctly during parallel
transfers, leading to aborted response bodies being reported complete.
Closes#10715
- add parameter to `conn_is_alive()` cfilter method that returns
if there is input data waiting on the connection
- refrain from re-using connnection from the cache that have
input pending
- adapt http/2 and http/3 alive checks to digest pending input
to check the connection state
- remove check_cxn method from openssl as that was just doing
what the socket filter now does.
- add tests for connection reuse with special server configs
Closes#10690
- a reset transfer (HTTP/2 RST) did not always lead to the proper
error message on receiving its response, leading to wrong reports
of a successful transfer
- test_05_02 was able to trigger this condition with increased transfer
count. The simulated response errors did not carry a 'Content-Length'
so only proper RST handling could detect the abort
- When doing such transfers in parallel, a connection could enter the
state where
a) it had been closed (GOAWAY received)
b) the RST had not been "seen" for the transfer yet
or c) the GOAWAY announced an error and the last successful
stream id was not checked against ongoing transfers
Closes#10693
- refs #10634 where errors in the HTTP/2 framing layer are observed.
- the bug was that on connection reuse, the code attempted to switch
in yet another layer of HTTP/2 handling instead of detecting that
this was already in place.
- added pytest testcase reproducing the issue.
Reported-by: rwmjones on github
Fixes#10634Closes#10643
* do not process pending input data when copying pausedata to the
caller
* return CURLE_AGAIN if the output buffer could not be completely
written out.
Ref: #10525Closes#10529
- as reported in #10433, HTTP/2 uploads may stall when a response is
received before the upload is done. This happens when the
data->state.drain is set for such a transfer, as the special handling
in transfer.c from then on only cared about downloads.
- add continuation of uploads, if applicable, in this case.
- add pytest case test_07_12_upload_seq_large to reproduce this scenario
(although, current nghttp2 implementation is using drain less often)
Reported-by: Lucas Pardue
Fixes#10433Closes#10443
add a small buffer to nghttp2 session sending in order to aggregate
small SETTINGS/PRIO/WIN_UPDATE frames that nghttp2 "writes" to the
callback individually.
Ref: #10389Closes#10432
