- refs #10634 where errors in the HTTP/2 framing layer are observed.
- the bug was that on connection reuse, the code attempted to switch
in yet another layer of HTTP/2 handling instead of detecting that
this was already in place.
- added pytest testcase reproducing the issue.
Reported-by: rwmjones on github
Fixes#10634Closes#10643
- when h2/h3 eyeballing was involved, unix domain socket
configurations were not honoured
- configuring --unix-socket will disable HTTP/3 as candidate for eyeballing
- combinatino of --unix-socket and --http3-only will fail during initialisation
- adding pytest test_11 to reproduce
Reported-by: Jelle van der Waa
Fixes#10633Closes#10641
As tested in test_02_07, when firing off 200 urls with --parallel, 199
wait for the first connection to be established. if that is multiuse,
urls are added up to its capacity.
The first url over capacity opens another connection. But subsequent
urls found the same situation and open a connection too. They should
have waited for the second connection to actually connect and make its
capacity known.
This change fixes that by
- setting `connkeep()` early in the HTTP setup handler. as otherwise
a new connection is marked as closeit by default and not considered
for multiuse at all
- checking the "connected" status for a candidate always and continuing
to PIPEWAIT if no alternative is found.
pytest:
- removed "skip" from test_02_07
- added test_02_07b to check that http/1.1 continues to work as before
Closes#10456
- httpserver.pl -> http-server.pl for consistency
- add http3-server.pl to EXTRA_DIST; alphabetise for maintainability
- nghttpx proxy invocation scripts should not use getcwd
Closes#10568
- sscanf() is rather complex and slow, strchr() much simpler
- the port number function does not need to fully verify the IPv6 address
anyway as it is done later in the hostname_check() function and doing
it twice is unnecessary.
Closes#10541
- adding test_02_20 for reproducing the situation
- using recently released mod_h2 Apache module
- skipping test if an older version is installed
- adding installation of current mod_h2 to github pytest workflow
This reproduces the error reliable (for me) on the lib/http2.c version
of curl 7.88.0. And passes with the recent curl master.
Closes#10534
- connect timeout was used at half the configured value, if the
destination had 1 ip version 4 and other version 6 addresses
(or the other way around)
- extended test2600 to reproduce these cases
Reported-by: Michael Kaufmann
Fixes#10514Closes#10517
- adding pytest test_10 cases for proxy httpd setup tests
- fixing openssl bug in https: proxy hostname verification that
used the hostname of the request and not the proxy name.
Closes#10498
vquic stabilization
- udp send code shared between ngtcp2 and quiche
- quiche handling of data and events improved
ngtcp2 and pytest improvements
- fixes handling of "drain" situations, discovered in scorecard
tests with the Caddy server.
- improvements in handling transfers that have already data or
are already closed to make an early return on recv
pytest
- adding caddy tests when available
scorecard improvemnts.
- using correct caddy port
- allowing tests for only httpd or caddy
Closes#10451
- as reported in #10433, HTTP/2 uploads may stall when a response is
received before the upload is done. This happens when the
data->state.drain is set for such a transfer, as the special handling
in transfer.c from then on only cared about downloads.
- add continuation of uploads, if applicable, in this case.
- add pytest case test_07_12_upload_seq_large to reproduce this scenario
(although, current nghttp2 implementation is using drain less often)
Reported-by: Lucas Pardue
Fixes#10433Closes#10443
Prior to this change a workaround for Windows to recv before every send
was enabled by default. The way it works is a recv is called before
every send and saves the received data, in case send fails because in
Windows apparently that can wipe out the socket's internal received
data buffer.
This feature has led to several bugs because the way libcurl operates
it waits on a socket to read or to write, and may not at all times
check for buffered receive data.
Two recent significant bugs this workaround caused:
- Broken Schannel TLS 1.3 connections (#9431)
- HTTP/2 arbitrary hangs (#10253)
The actual code remains though it is disabled by default. Though future
changes to connection filter buffering could improve the situation IMO
it's just not tenable to manage this workaround.
Ref: https://github.com/curl/curl/issues/657
Ref: https://github.com/curl/curl/pull/668
Ref: https://github.com/curl/curl/pull/720
Ref: https://github.com/curl/curl/issues/9431
Ref: https://github.com/curl/curl/issues/10253
Closes https://github.com/curl/curl/pull/10409
curl would erroneously report CURLE_OUT_OF_MEMORY in some cases instead
of CURLE_URL_MALFORMAT. In other cases, it would erroneously return
CURLE_URL_MALFORMAT instead of CURLE_OUT_OF_MEMORY. Add a test case to
test the former condition.
Fixes#10130Closes#10414
New cfilter HTTP-CONNECT for h3/h2/http1.1 eyeballing.
- filter is installed when `--http3` in the tool is used (or
the equivalent CURLOPT_ done in the library)
- starts a QUIC/HTTP/3 connect right away. Should that not
succeed after 100ms (subject to change), a parallel attempt
is started for HTTP/2 and HTTP/1.1 via TCP
- both attempts are subject to IPv6/IPv4 eyeballing, same
as happens for other connections
- tie timeout to the ip-version HAPPY_EYEBALLS_TIMEOUT
- use a `soft` timeout at half the value. When the soft timeout
expires, the HTTPS-CONNECT filter checks if the QUIC filter
has received any data from the server. If not, it will start
the HTTP/2 attempt.
HTTP/3(ngtcp2) improvements.
- setting call_data in all cfilter calls similar to http/2 and vtls filters
for use in callback where no stream data is available.
- returning CURLE_PARTIAL_FILE for prematurely terminated transfers
- enabling pytest test_05 for h3
- shifting functionality to "connect" UDP sockets from ngtcp2
implementation into the udp socket cfilter. Because unconnected
UDP sockets are weird. For example they error when adding to a
pollset.
HTTP/3(quiche) improvements.
- fixed upload bug in quiche implementation, now passes 251 and pytest
- error codes on stream RESET
- improved debug logs
- handling of DRAIN during connect
- limiting pending event queue
HTTP/2 cfilter improvements.
- use LOG_CF macros for dynamic logging in debug build
- fix CURLcode on RST streams to be CURLE_PARTIAL_FILE
- enable pytest test_05 for h2
- fix upload pytests and improve parallel transfer performance.
GOAWAY handling for ngtcp2/quiche
- during connect, when the remote server refuses to accept new connections
and closes immediately (so the local conn goes into DRAIN phase), the
connection is torn down and a another attempt is made after a short grace
period.
This is the behaviour observed with nghttpx when we tell it to shut
down gracefully. Tested in pytest test_03_02.
TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).
- new tests/tests-httpd/scorecard.py for testing h3/h2 protocol implementation.
Invoke:
python3 tests/tests-httpd/scorecard.py --help
for usage.
Improvements on gathering connect statistics and socket access.
- new CF_CTRL_CONN_REPORT_STATS cfilter control for having cfilters
report connection statistics. This is triggered when the connection
has completely connected.
- new void Curl_pgrsTimeWas(..) method to report a timer update with
a timestamp of when it happend. This allows for updating timers
"later", e.g. a connect statistic after full connectivity has been
reached.
- in case of HTTP eyeballing, the previous changes will update
statistics only from the filter chain that "won" the eyeballing.
- new cfilter query CF_QUERY_SOCKET for retrieving the socket used
by a filter chain.
Added methods Curl_conn_cf_get_socket() and Curl_conn_get_socket()
for convenient use of this query.
- Change VTLS backend to query their sub-filters for the socket when
checks during the handshake are made.
HTTP/3 documentation on how https eyeballing works.
TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).
Scorecard with Caddy.
- configure can be run with `--with-test-caddy=path` to specify which caddy to use for testing
- tests/tests-httpd/scorecard.py now measures download speeds with caddy
pytest improvements
- adding Makfile to clean gen dir
- adding nghttpx rundir creation on start
- checking httpd version 2.4.55 for test_05 cases where it is needed. Skipping with message if too old.
- catch exception when checking for caddy existance on system.
Closes#10349
- add test2600 as a unit test that triggers various connect conditions
and monitors behaviour, available in a debug build only.
- this exposed edge cases in connect.c that have been fixed
Closes#10312
- adding '--with-test-httpd=<path>' to configure non-standard apache2
install
- python env and base classes for running httpd
- basic tests for connectivity with h1/h2/h3
- adding test cases for truncated responses in http versions.
- adding goaway test for HTTP/3.
- adding "stuttering" tests with parallel downloads in chunks with
varying delays between chunks.
- adding a curltest module to the httpd server, adding GOAWAY test.
- mod_curltest now installs 2 handlers
- 'echo': writing as response body what came as request body
- 'tweak': with query parameters to tweak response behaviour
- marked known fails as skip for now
Closes#10175
