... so that failures in the global init function don't count as a
working init and it can then be called again.
Reported-by: Paul Groke
Fixes#4636Closes#4653
Repeatedly we see problems where using curl_multi_wait() is difficult or
just awkward because if it has no file descriptor to wait for
internally, it returns immediately and leaves it to the caller to wait
for a small amount of time in order to avoid occasional busy-looping.
This is often missed or misunderstood, leading to underperforming
applications.
This change introduces curl_multi_poll() as a replacement drop-in
function that accepts the exact same set of arguments. This function
works identically to curl_multi_wait() - EXCEPT - for the case when
there's nothing to wait for internally, as then this function will by
itself wait for a "suitable" short time before it returns. This
effectiely avoids all risks of busy-looping and should also make it less
likely that apps "over-wait".
This also changes the curl tool to use this funtion internally when
doing parallel transfers and changes curl_easy_perform() to use it
internally.
Closes#4163
- In curl_easy_reset attempt to resize the receive buffer to its default
size. If realloc fails then continue using the previous size.
Prior to this change curl_easy_reset did not properly handle resetting
the receive buffer (data->state.buffer). It reset the variable holding
its size (data->set.buffer_size) to the default size (READBUFFER_SIZE)
but then did not actually resize the buffer. If a user resized the
buffer by using CURLOPT_BUFFERSIZE to set the size smaller than the
default, later called curl_easy_reset and attempted to reuse the handle
then a heap overflow would very likely occur during that handle's next
transfer.
Reported-by: Felix Hädicke
Fixes https://github.com/curl/curl/issues/4143
Closes https://github.com/curl/curl/pull/4145
... so that timeouts or other state machine actions get going again
after a changing pause state. For example, if the last delivery was
paused there's no pending socket activity.
Reported-by: sstruchtrup on github
Fixes#3994Closes#4001
They serve very little purpose and mostly just add noise. Most of them
have been around for a very long time. I read them all before removing
or rephrasing them.
Ref: #3876Closes#3883
Codacy/CppCheck warns about this. Consistently use parentheses as we
already do in some places to silence the warning.
Closes https://github.com/curl/curl/pull/3866
Remove the code too. The functionality has been disabled in code since
7.62.0. Setting this option will from now on simply be ignored and have
no function.
Closes#3654
- Change the behavior of win32_init so that the required initialization
procedures are not affected by CURL_GLOBAL_WIN32 flag.
libcurl via curl_global_init supports initializing for win32 with an
optional flag CURL_GLOBAL_WIN32, which if omitted was meant to stop
Winsock initialization. It did so internally by skipping win32_init()
when that flag was set. Since then win32_init() has been expanded to
include required initialization routines that are separate from
Winsock and therefore must be called in all cases. This commit fixes
it so that CURL_GLOBAL_WIN32 only controls the optional win32
initialization (which is Winsock initialization, according to our doc).
The only users affected by this change are those that don't pass
CURL_GLOBAL_WIN32 to curl_global_init. For them this commit removes the
risk of a potential crash.
Ref: https://github.com/curl/curl/pull/3573
Fixes https://github.com/curl/curl/issues/3313
Closes https://github.com/curl/curl/pull/3575
... and avoid use of static variables that aren't thread safe.
Fixes regression from e9ababd4f5 (present in the 7.64.0 release)
Reported-by: Paul Groke
Fixes#3572Closes#3573
We use "conn" everywhere to be a pointer to the connection.
Introduces two functions that "attaches" and "detaches" the connection
to and from the transfer.
Going forward, we should favour using "data->conn" (since a transfer
always only has a single connection or none at all) to "conn->data"
(since a connection can have none, one or many transfers associated with
it and updating conn->data to be correct is error prone and a frequent
reason for internal issues).
Closes#3442
curl_multi_wait() was erroneously used from within
curl_easy_perform(). It could lead to it believing there was no socket
to wait for and then instead sleep for a while instead of monitoring the
socket and then miss acting on that activity as swiftly as it should
(causing an up to 1000 ms delay).
Reported-by: Antoni Villalonga
Fixes#3305Closes#3306Closes#3308
When using c-ares for asyn dns, the dns socket fd was silently closed
by c-ares without curl being aware. curl would then 'realize' the fd
has been removed at next call of Curl_resolver_getsock, and only then
notify the CURLMOPT_SOCKETFUNCTION to remove fd from its poll set with
CURL_POLL_REMOVE. At this point the fd is already closed.
By using ares socket state callback (ARES_OPT_SOCK_STATE_CB), this
patch allows curl to be notified that the fd is not longer needed
for neither for write nor read. At this point by calling
Curl_multi_closed we are able to notify multi with CURL_POLL_REMOVE
before the fd is actually closed by ares.
In asyn-ares.c Curl_resolver_duphandle we can't use ares_dup anymore
since it does not allow passing a different sock_state_cb_data
Closes#3238
- replace tabs with spaces where possible
- remove line ending spaces
- remove double/triple newlines at EOF
- fix a non-UTF-8 character
- cleanup a few indentations/line continuations
in manual examples
Closes https://github.com/curl/curl/pull/3037
Add functionality so that protocols can do custom keepalive on their
connections, when an external API function is called.
Add docs for the new options in 7.62.0
Closes#1641
Handles created with curl_easy_duphandle do not use the SSL engine set
up in the original handle. This fixes the issue by storing the engine
name in the internal url state and setting the engine from its name
inside curl_easy_duphandle.
Reported-by: Anton Gerasimov
Signed-of-by: Laurent Bonnans
Fixes#2829Closes#2833
... and trim the threaded Curl_resolver_getsock() to return zero
millisecond wait times during the first three milliseconds so that
localhost or names in the OS resolver cache gets detected and used
faster.
Closes#2685
Especially unpausing a transfer might have to move the socket back to the
"currently used sockets" hash to get monitored. Otherwise it would never get
any more data and get stuck. Easily triggered with pausing using the
multi_socket API.
Reported-by: Philip Prindeville
Bug: https://curl.haxx.se/mail/lib-2018-03/0048.htmlFixes#2393Closes#2391
A mime tree attached to an easy handle using CURLOPT_MIMEPOST is
strongly bound to the handle: there is a pointer to the easy handle in
each item of the mime tree and following the parent pointer list
of mime items ends in a dummy part stored within the handle.
Because of this binding, a mime tree cannot be shared between different
easy handles, thus it needs to be cloned upon easy handle duplication.
There is no way for the caller to get the duplicated mime tree
handle: it is then set to be automatically destroyed upon freeing the
new easy handle.
New test 654 checks proper mime structure duplication/release.
Add a warning note in curl_mime_data_cb() documentation about sharing
user data between duplicated handles.
Closes#2235
Move curl_mime_initpart() and curl_mime_cleanpart() calls to lower-level
functions dealing with UserDefined structure contents.
This avoids memory leakages on curl-generated part mime headers.
New test 2073 checks this using the cli tool --next option: it
triggers a valgrind error if bug is present.
Bug: https://curl.haxx.se/mail/lib-2017-12/0060.html
Reported-by: Martin Galvan
libssh is an alternative library to libssh2.
https://www.libssh.org/
That patch set also introduces support for ECDSA
ed25519 keys, as well as gssapi authentication.
Signed-off-by: Nikos Mavrogiannopoulos <nmav@redhat.com>
This bit is no longer used. It is not clear what it meant for users to
"init the TLS" in a world with different TLS backends and since the
introduction of multissl, libcurl didn't properly work if inited without
this bit set.
Not a single user responded to the call for users of it:
https://curl.haxx.se/mail/lib-2017-11/0072.html
Reported-by: Evgeny Grin
Assisted-by: Jay Satiro
Fixes#2089Fixes#2083Closes#2107
... since the 'tv' stood for timeval and this function does not return a
timeval struct anymore.
Also, cleaned up the Curl_timediff*() functions to avoid typecasts and
clean up the descriptive comments.
Closes#2011
... to cater for systems with unsigned time_t variables.
- Renamed the functions to curlx_timediff and Curl_timediff_us.
- Added overflow protection for both of them in either direction for
both 32 bit and 64 bit time_ts
- Reprefixed the curlx_time functions to use Curl_*
Reported-by: Peter Piekarski
Fixes#2004Closes#2005
First: this function is only used in debug-builds and not in
release/real builds. It is used to drive tests using the event-based
API.
A pointer to the local struct is passed to CURLMOPT_TIMERDATA, but the
CURLMOPT_TIMERFUNCTION calback can in fact be called even after this
funtion returns, namely when curl_multi_remove_handle() is called.
Reported-by: Brian Carpenter
... to make all libcurl internals able to use the same data types for
the struct members. The timeval struct differs subtly on several
platforms so it makes it cumbersome to use everywhere.
Ref: #1652Closes#1693
... since the total amount is low this is faster, easier and reduces
memory overhead.
Also, Curl_expire_done() can now mark an expire timeout as done so that
it never times out.
Closes#1472
