- ipfs://<cid>
- ipns://<cid>
This allows you tu use ipfs in curl like:
curl ipfs://<cid>
and
curl ipns://<cid>
For more information consult the readme at:
https://curl.se/docs/ipfs.htmlCloses#8805
If uname -r returns something odd, perl could return an error code and
the test would be erroneously skipped. The qx// syntax avoid this.
Followup to 08f9b2148
These kernels only send a fraction of the requested amount of the first
large block, invalidating the assumptions of the test and causing it to
fail.
Assisted-by: Christian Weisgerber
Ref: https://curl.se/mail/lib-2023-09/0021.htmlCloses#11888
Generate alphanumerical random strings.
Prior this change curl used to create random hex strings. This was
mostly okay, but having alphanumerical random strings is better: The
strings have more entropy in the same space.
The MIME multipart boundary used to be mere 64-bits of randomness due
to being 16 hex chars. With these changes the boundary is 22
alphanumerical chars, or little over 130 bits of randomness.
Closes#11838
This test relies on the IPv6 scope field being ignored when connecting to
ipv6-localhost (i.e. [::1%259999] is treated as [::1]). Maybe this is a bit
dodgy, but it works on all our test platforms except Windows. This
test was disabled manually on all Windows CI builds already, so instead
add an incompatible feature and precheck so it's skipped on Windows
everywhere automatically.
This test is designed to connect to the server, then immediately send a
few bytes and disconnect. In some situations, such as on a loaded
server, this doesn't give the server enough time to write its lock file
before its existence is checked. The test harness then fails to find the
server's input log file (because it hasn't been written yet) and fails
the test. By adding a short delay after the test, the HTTP server has
enough time to write its lock file which gives itself more time to write
its remaining files.
Ref: #11328
These tests reduce the server lock wait timeout which can increase
flakiness on loaded machines. Since this is merely an optimization,
eliminate them in favour of reliability.
Ref: #11328
These tests can fail when the test machine is so slow that the test HTTP
server didn't get a chance to complete before the client's one second
100-continue timeout triggered. Increase that 1 second to 999 seconds so
this situation doesn't happen.
Ref: #11328
These are ones likely to fail on heavily-loaded machines that alter the
normal test timing. Most of these tests already had the flaky keyword
since this condition makes them more likely to fail on CI.
These tests are run in SLOWDOWN mode which adds a 10 msec delay after
each character output, which means it takes at least 1.6 seconds (and
320 kernel calls) just to get through the long welcome banner. On an
overloaded system, this can end up taking much more than 1.6 seconds,
and even more than the 7 or 16 second curl timeout that the tests rely
on, causing them to fail. Reducing the size of the welcome banner drops
the total number of characters sent before the transfer starts by more
than half, which reduces the opportunity for test-breaking slowdowns by
the same amount.
Ref: #11328
- Handle user headers in format 'name:' and 'name;' with no value.
The former is used when the user wants to remove an internal libcurl
header and the latter is used when the user actually wants to send a
no-value header in the format 'name:' (note the semi-colon is converted
by libcurl to a colon).
Prior to this change the AWS header import code did not special case
either of those and the generated AWS SignedHeaders would be incorrect.
Reported-by: apparentorder@users.noreply.github.com
Ref: https://curl.se/docs/manpage.html#-H
Fixes https://github.com/curl/curl/issues/11664
Closes https://github.com/curl/curl/pull/11668
- Use CERT_CONTEXT's pbCertEncoded to determine chain order.
CERT_CONTEXT from SECPKG_ATTR_REMOTE_CERT_CONTEXT contains
end-entity/server certificate in pbCertEncoded. We can use this pointer
to determine the order of certificates when enumerating hCertStore using
CertEnumCertificatesInStore.
This change is to help ensure that the ordering of the certificate chain
requested by the user via CURLINFO_CERTINFO has the same ordering on all
versions of Windows.
Prior to this change Schannel certificate order was reversed in 8986df80
but that was later reverted in f540a39b when it was discovered that
Windows 11 22H2 does the reversal on its own.
Ref: https://github.com/curl/curl/issues/9706
Closes https://github.com/curl/curl/pull/11632
In https://www.rfc-editor.org/rfc/rfc2831#section-2.1.2
digest-uri-value should be serv-type "/" host , where host is:
The DNS host name or IP address for the service requested. The
DNS host name must be the fully-qualified canonical name of the
host. The DNS host name is the preferred form; see notes on server
processing of the digest-uri.
Realm may not be the host, so we must specify the host explicitly.
Note this change only affects the non-SSPI digest code. The digest code
used by SSPI builds already uses the hostname to generate the spn.
Ref: https://github.com/curl/curl/issues/11369
Closes https://github.com/curl/curl/pull/11395
- delete completed TODO from `./CMakeLists.txt`.
- convert a C++ comment to C89 in `./CMake/CurlTests.c`.
- delete duplicate EOLs from EOF.
- add missing EOL at EOF.
- delete whitespace at EOL (except from expected test results).
- convert tabs to spaces.
- convert CRLF EOLs to LF in GHA yaml.
- text casing fixes in `./CMakeLists.txt`.
- fix a codespell typo in `packages/OS400/initscript.sh`.
Closes#11772
- Error on missing input file for --data, --data-binary,
--data-urlencode, --header, --variable, --write-out.
Prior to this change if a user of the curl tool specified an input file
for one of the above options and that file could not be opened then it
would be treated as zero length data instead of an error. For example, a
POST using `--data @filenametypo` would cause a zero length POST which
is probably not what the user intended.
Closes https://github.com/curl/curl/pull/11677
Store numerical IPv6 addresses in the alt-svc file with the brackets
present.
Verify with test 437 and 438
Fixes#11737
Reported-by: oliverpool on github
Closes#11743
This allows testing Y2038 with system time set to after that, so that
actual Y2038 issues can be exposed, and not masked by expiry errors.
Fixes#11576Closes#11610
In this situation, only part of the data has been sent before aborting
so the connection is no longer usable.
Assisted-by: Jay Satiro
Fixes#11678Closes#11679
Expansions whose output starts with NUL were being expanded to the empty
string, and not being recognised as values that contain a NUL byte, and
should error.
Closes#11694
When the legacy CURLOPT_HTTPPOST option is used, it gets converted into
the modem mimpost struct at first use. This data is (now) kept for the
entire transfer and not only per single HTTP request. This re-enables
rewind in the beginning of the second request instead of in end of the
first, as brought by 1b39731.
The request struct is per-request data only.
Extend test 650 to verify.
Fixes#11680
Reported-by: yushicheng7788 on github
Closes#11682
This test runs a perl script that checks all string options are properly
translated by the OS400 character code conversion wrapper. It also
verifies these options are listed in alphanumeric order in the wrapper
switch statement.
Closes#11650
In order to get Negotiate (SPNEGO) authentication to work in HTTP you
used to be required to provide a (fake) user name (this concerned both
curl and the lib) because the code wrongly only considered
authentication if there was a user name provided, as in:
curl -u : --negotiate https://example.com/
This commit leverages the `struct auth` want member to figure out if the
user enabled CURLAUTH_NEGOTIATE, effectively removing the requirement of
setting a user name both in curl and the lib.
Signed-off-by: Marin Hannache <git@mareo.fr>
Reported-by: Enrico Scholz
Fixes https://sourceforge.net/p/curl/bugs/440/Fixes#1161Closes#9047
This is a bad header fold but since the popular browsers accept this
violation, so does curl now. Unless built with hyper.
Add test 1473 to verify and adjust test 2306.
Reported-by: junsik on github
Fixes#11605Closes#11607
Add `test1279` to verify that `libcurl.def` lists all exported API
functions found in libcurl headers.
Also:
- extend test suite XML `stdout` tag with the `loadfile` attribute.
- fix `tests/extern-scan.pl` and `test1135` to include websocket API.
- use all headers (sorted) in `test1135` instead of a manual list.
- add options `--sort`, `--heading=` to `tests/extern-scan.pl`.
- add `libcurl.def` to the auto-labeler GHA task.
Follow-up to 2ebc74c36aCloses#11570
It can be used multiple times. Use %output{>>name} to append.
Add docs. Test 990 and 991 verify.
Idea: #11400
Suggested-by: ed0d2b2ce19451f2
Closes#11416
Add support for command line variables. Set variables with --variable
name=content or --variable name@file (where "file" can be stdin if set
to a single dash (-)).
Variable content is expanded in option parameters using "{{name}}"
(without the quotes) if the option name is prefixed with
"--expand-". This gets the contents of the variable "name" inserted, or
a blank if the name does not exist as a variable. Insert "{{" verbatim
in the string by prefixing it with a backslash, like "\\{{".
Import an environment variable with --variable %name. It makes curl exit
with an error if the environment variable is not set. It can also rather
get a default value if the variable does not exist, using =content or
@file like shown above.
Example: get the USER environment variable into the URL:
--variable %USER
--expand-url = "https://example.com/api/{{USER}}/method"
When expanding variables, curl supports a set of functions that can make
the variable contents more convenient to use. It can trim leading and
trailing white space with "trim", output the contents as a JSON quoted
string with "json", URL encode it with "url" and base 64 encode it with
"b64". To apply functions to a variable expansion, add them colon
separated to the right side of the variable. They are then performed in
a left to right order.
Example: get the contents of a file called $HOME/.secret into a variable
called "fix". Make sure that the content is trimmed and percent-encoded
sent as POST data:
--variable %HOME=/home/default
--expand-variable fix@{{HOME}}/.secret
--expand-data "{{fix:trim:url}}"
https://example.com/
Documented. Many new test cases.
Co-brainstormed-by: Emanuele Torre
Assisted-by: Jat Satiro
Closes#11346
Introduce a --enable-form-api configure option to control its inclusion
in builds. The condition name defined for it is CURL_DISABLE_FORM_API.
Form api code is dependent of MIME: configure and CMake handle this
dependency automatically: CMake by making it a dependent option
explicitly, configure by inheriting the MIME value by default and
rejecting explicit incompatible values.
"form-api" is now a new hidden test feature.
Update libcurl modules to respect this option and adjust tests
accordingly.
Closes#9621
Fix the distcheck CI failure and delete more NSS references.
Follow-up to 7c8bae0d9c
Reviewed-by: Marcel Raad
Reviewed-by: Daniel Stenberg
Closes#11548
Make sure the user and password for the second request is taken from the
redirected-to URL.
Add test case 899 to verify.
Reported-by: James Lucas
Fixes#11410Closes#11412
