- Escape inner quotes with two backslashes.
Two backslashes escapes the backslash for the man page and will show as
a single backslash.
eg: "{\\"name\\": \\"daniel\\"}" shows as "{\"name\": \"daniel\"}".
Closes https://github.com/curl/curl/pull/12588
- add test cases for rate limiting uploads for all
http versions
- fix transfer loop handling of limits. Signal a re-receive
attempt only on exhausting maxloops without an EAGAIN
- fix `data->state.selectbits` forcing re-receive to also
set re-sending when transfer is doing this.
Reported-by: Karthikdasari0423 on github
Fixes#12559Closes#12586
- there seems to be a code path that cleans up easy handles without
triggering DONE or DETACH events to the connection filters. This
would explain wh nghttp2 still holds stream user data
- add GOOD check to easy handle used in on_close_callback to
prevent crashes, ASSERTs in debug builds.
- NULL the stream user data early before submitting RST
- add checks in on_stream_close() to identify UNGOOD easy handles
Reported-by: Hans-Christian Egtvedt
Fixes#10936Closes#12562
In a test case using lots of snprintf() calls using many commonly used
%-codes per call, this version is around 30% faster than previous
version.
It also fixes the #12561 bug which made it not behave correctly when
given unknown %-sequences. Fixing that flaw required a different take on
the problem, which resulted in the new two-arrays model.
lib557: extended - Verify the #12561 fix and test more printf features
unit1398: fix test: It used a <num>$ only for one argument, which is not
supported.
Fixes#12561Closes#12563
PowerShell works (after a steep development curve), but one property of
it stuck and kept causing unresolvable usability issues: With
`$ErrorActionPreference=Stop`, it does abort on failures, but shows only
the first line of the error message. In `Continue` mode, it shows the
full error message, but doesn't stop on all errors. Another issue is
PowerShell considering any stderr output as if the command failed (this
has been improved in 7.2 (2021-Nov), but fixed versions aren't running
in CI and will not be for a long time in all test images.)
Thus, we're going with bash.
Also:
- use `-j2` with autotools tests, making them finish 5-15 minutes per
job faster.
- omit `POSIX_PATH_PREFIX`.
- use `WINDIR`.
- prefer forward slashes.
Follow-up to: 75078a415d#11999
Ref: #12444Fixes#12560Closes#12572
- enable `-Wsign-conversion` warnings, but also setting them to not
raise errors.
- fix `-Warith-conversion` warnings seen in CI.
These are triggered by `-Wsign-converion` and causing errors unless
explicitly silenced. It makes more sense to fix them, there just a few
of them.
- fix some `-Wsign-conversion` warnings.
- hide `-Wsign-conversion` warnings with a `#pragma`.
- add macro `CURL_WARN_SIGN_CONVERSION` to unhide them on a per-build
basis.
- update a CI job to unhide them with the above macro:
https://github.com/curl/curl/actions/workflows/linux.yml -> OpenSSL -O3
Closes#12492
- make more obvious which detection uses which prep steps.
- merge and streamline conditions.
- these should not alter detection results.
Also align log output messages from
`Macros.cmake` / `curl_internal_test` with rest of the build.
Closes#12551
- memdebug: update to not trigger `-Wformat-nonliteral` warnings.
- imap: mark `imap_sendf()` with `CURL_PRINTF()`.
- tool_msgs: mark static function with `CURL_PRINTF()`.
Follow-up to 3829759bd0#12489Closes#12540
`winsock2.h` pulls in `windows.h`. `ws2tcpip.h` pulls in `winsock2.h`.
`winsock2.h` and `ws2tcpip.h` are also pulled by `curl/curl.h`.
Keep only those headers that are not already included, or the code under
it uses something from that specific header.
Closes#12539
Follow-up to 63b5748
Invokes the test case via lldb instead of gdb. Since using gdb is such a
pain on mac, using lldb is sometimes less quirky.
Closes#12547
A new error code to be used when an internal field grows too large, like
when a dynbuf reaches its maximum. Previously it would return
CURLE_OUT_OF_MEMORY for this, which is highly misleading.
Ref: #12268Closes#12269
When running on termux, where $TMPDIR isn't /tmp, running the tests
failed, since the server config tried creating sockets in /tmp, without
checking the temp dir config. Use the TMPDIR variable that makes it find
the correct directory everywhere [0]
[0] https://perldoc.perl.org/File::Temp#tempfileCloses#12545
Avoid using the libssh and libssh2 macro namespaces by prefixing
these local macro names with `CURL_`.
Follow-up to 413a0fedd0#12346
Reviewed-by: Daniel Stenberg
Closes#12544
This PR fixes a problem that happens during CMake configuration when
the `CMAKE_SYSTEM_NAME` set to `iOS` and not `Darwin`. This value is
available (as far as I remember) version 3.14. The final solution
(thanks to @vszakats) is to use `APPLE` which contains all the Apple
platforms https://cmake.org/cmake/help/latest/variable/APPLE.html.
This issue was found when during vcpkg installation. Running command
`vcpkg install curl:arm64-ios` and `vcpkg install curl:x64-ios` failed
with message:
```
CMake Error: try_run() invoked in cross-compiling mode, please set the following cache variables appropriately:
HAVE_H_ERRNO_ASSIGNABLE_EXITCODE (advanced)
```
After this fix, I was able to compile the compile the binary without
any issue.
In addition to that fix, this PR also contains an simplification to
check if the platform is not APPLE.
Co-authored-by: Viktor Szakats
Closes#12515
infof() parameters must be defined event with --disable-verbose since
commit dac293cfb7 ("lib: apache style infof and trace
macros/functions").
Move also 'ptr' definition under !CURL_DISABLE_VERBOSE_STRINGS.
Fixes the following build failure:
In file included from ../lib/sendf.h:29,
from vtls/gtls.c:44:
vtls/gtls.c: In function 'Curl_gtls_verifyserver':
vtls/gtls.c:841:34: error: 'version' undeclared (first use in this function); did you mean 'session'?
841 | gnutls_protocol_get_name(version), ptr);
| ^~~~~~~
Closes#12505
Stop setting `HAVE_GSSHEIMDAL`, `HAVE_GSSMIT` and `HAVE_HEIMDAL`.
There was no place in the build system or source code that used them.
Reviewed-by: Daniel Stenberg
Closes#12506
These macros were not propagated to the source code from CMake.
autotools set only one of them (`CURL_PULL_SYS_POLL_H`), initially to
address an AIX issue [1]. This later broke when introducing `system.h`
[2] without the logic it enabled. A subsequent fix [3] re-added the
logic, and also enabled it for AIX before its use, directly in
`system.h`.
[1] 2012-11-23: 665adcd4b7
[2] 2017-03-29: 9506d01ee5#1373
[3] 2017-08-25: 8a84fcc4b5#1828#1833
Reviewed-by: Daniel Stenberg
Closes#12502
Align mingw with the other Windows compilers and use the `int` type for
`CURL_TYPEOF_CURL_SOCKLEN_T` (and thus for `curl_socklent_t`). This
makes it unnecessary to make a mingw-specific trick and pull all Windows
headers early just for this type definition. This type is specific to
Windows, not to the compiler. mingw-w64's Windows header maps it to
`int` too.
With this we also delete all remaining uses of `CURL_PULL_WS2TCPIP_H`.
[ The official solution is to use `socklen_t` for all Windows compilers.
In this case we may want to update `curl/curl.h` to pull in Windows
headers before `system.h`. ]
Reviewed-by: Daniel Stenberg
Reviewed-by: Jay Satiro
Closes#12501
- autotools, cmake: assume that if we detect Windows, `windows.h`,
`winsock2.h` and `ws2tcpip.h` do exist.
- lib: fix 3 outlier `#if` conditions to use `USE_WINSOCK` instead of
looking for `winsock2.h`.
- autotools: merge 3 Windows check methods into one.
- move Watt-32 and lwIP socket support to `setup-win32.h` from
`config-win32.h`. It opens up using these with all build tools. Also
merge logic with Windows Sockets.
- fix to assume Windows sockets with the mingw32ce toolchain.
Follow-up to: 2748c64d60
- cmake: delete unused variable `signature_call_conv` since
eb33ccd533.
- autotools: simplify `CURL_CHECK_WIN32_LARGEFILE` detection.
- examples/externalsocket: fix header order.
- cmake/OtherTests.cmake: delete Windows-specific `_source_epilogue`
that wasn't used anymore.
- cmake/OtherTests.cmake: set `WIN32_LEAN_AND_MEAN` for test
`SIZEOF_STRUCT_SOCKADDR_STORAGE`.
After this patch curl universally uses `_WIN32` to guard
Windows-specific logic. It guards Windows Sockets-specific logic with
`USE_WINSOCK` (this might need further work).
Reviewed-by: Jay Satiro
Closes#12495
https://best.openssf.org/Compiler-Hardening-Guides/Compiler-Options-Hardening-Guide-for-C-and-C++.html
as of 2023-11-29 [1].
Enable new recommended warnings (except `-Wsign-conversion`):
- enable `-Wformat=2` for clang (in both cmake and autotools).
- add `CURL_PRINTF()` internal attribute and mark functions accepting
printf arguments with it. This is a copy of existing
`CURL_TEMP_PRINTF()` but using `__printf__` to make it compatible
with redefinting the `printf` symbol:
https://gcc.gnu.org/onlinedocs/gcc-3.0.4/gcc_5.html#SEC94
- fix `CURL_PRINTF()` and existing `CURL_TEMP_PRINTF()` for
mingw-w64 and enable it on this platform.
- enable `-Wimplicit-fallthrough`.
- enable `-Wtrampolines`.
- add `-Wsign-conversion` commented with a FIXME.
- cmake: enable `-pedantic-errors` the way we do it with autotools.
Follow-up to d5c0351055#2747
- lib/curl_trc.h: use `CURL_FORMAT()`, this also fixes it to enable format
checks. Previously it was always disabled due to the internal `printf`
macro.
Fix them:
- fix bug where an `set_ipv6_v6only()` call was missed in builds with
`--disable-verbose` / `CURL_DISABLE_VERBOSE_STRINGS=ON`.
- add internal `FALLTHROUGH()` macro.
- replace obsolete fall-through comments with `FALLTHROUGH()`.
- fix fallthrough markups: Delete redundant ones (showing up as
warnings in most cases). Add missing ones. Fix indentation.
- silence `-Wformat-nonliteral` warnings with llvm/clang.
- fix one `-Wformat-nonliteral` warning.
- fix new `-Wformat` and `-Wformat-security` warnings.
- fix `CURL_FORMAT_SOCKET_T` value for mingw-w64. Also move its
definition to `lib/curl_setup.h` allowing use in `tests/server`.
- lib: fix two wrongly passed string arguments in log outputs.
Co-authored-by: Jay Satiro
- fix new `-Wformat` warnings on mingw-w64.
[1] 56c0fde389/docs/Compiler-Hardening-Guides/Compiler-Options-Hardening-Guide-for-C-and-C%2B%2B.mdCloses#12489
Remove use of .TP and some .B. The idea is to reduce nroff syntax as
much as possible and to use it consistently. Ultimately, we should be
able to introduce our own easier-to-use-and-read syntax/formatting and
convert on generation time.
Closes#12535
They are accepted schemes in URLs passed to curl (the tool, not the
library).
Also makes curl-config show the same list.
Co-Authored-by: Jay Satiro
Reported-by: Chara White
Bug: https://curl.se/mail/archive-2023-12/0026.htmlCloses#12508
Previous code was compiler dependant, and dismissed all deprecation warnings
indiscriminately.
libssh provides a way to disable the deprecation warnings for libssh only, and
naturally this is the preferred way.
This commit uses that, to prevent the erroneous hiding of potential, unrelated
deprecation warnings.
Fixes#12519Closes#12520
