- state is fully kept at connection, since curl_ws_send() and
curl_ws_rec() have lifetime beyond usual transfers
- no more limit on frame sizes
Reported-by: simplerobot on github
Fixes#10962Closes#10999
Prior to this change STRING_AWS_SIGV4 (CURLOPT_AWS_SIGV4) was wrongly
marked as binary data that could not be duplicated.
Without this fix, this option's value is not copied upon calling
curl_easy_duphandle().
Closes https://github.com/curl/curl/pull/11021
- `drain` was used by http/2 and http/3 implementations to indicate
that the transfer requires send/recv independant from its socket
poll state. Intended as a counter, it was used as bool flag only.
- a similar mechanism exists on `connectdata->cselect_bits` where
specific protocols can indicate something similar, only for the
whole connection.
- `cselect_bits` are cleard in transfer.c on use and, importantly,
also set when the transfer loop expended its `maxloops` tries.
`drain` was not cleared by transfer and the http2/3 implementations
had to take care of that.
- `dselect_bits` is cleared *and* set by the transfer loop. http2/3
does no longer clear it, only set when new events happen.
This change unifies the handling of socket poll overrides, extending
`cselect_bits` by a easy handle specific value and a common treatment in
transfers.
Closes#11005
By making sure we set state.upload based on the set.method value and not
independently as set.upload, we reduce confusion and mixup risks, both
internally and externally.
Closes#11017
- currently only on debug build and when env variable
CURL_PROXY_TUNNEL_H2 is present.
- will ALPN negotiate with the proxy server and switch
tunnel filter based on the protocol negotiated.
- http/1.1 tunnel code moved into cf-h1-proxy.[ch]
- http/2 tunnel code implemented in cf-h2-proxy.[ch]
- tunnel start and ALPN set remains in http_proxy.c
- moving all haproxy related code into cf-haproxy.[ch]
VTLS changes
- SSL filters rely solely on the "alpn" specification they
are created with and no longer check conn->bits.tls_enable_alpn.
- checks on which ALPN specification to use (or none at all) are
done in vtls.c when creating the filter.
Testing
- added a nghttpx forward proxy to the pytest setup that
speaks HTTP/2 and forwards all requests to the Apache httpd
forward proxy server.
- extending test coverage in test_10 cases
- adding proxy tests for direct/tunnel h1/h2 use of basic auth.
- adding test for http/1.1 and h2 proxy tunneling to pytest
Closes#10780
Some IP cameras send malformed RTSP interleaved frames sometimes, which
can cause curl_easy_perform return 1 (CURLE_UNSUPPORTED_PROTOCOL). This
change attempts to skip clearly incorrect RTSP interleaving frame data.
Closes#10808
As they are not driving transfers or any socket activity, the main loop
does not need to iterate over these handles. A performance improvement.
They are instead only held in their own separate lists.
'data->multi' is kept a pointer to the multi handle as long as the easy
handle is actually part of it even when the handle is moved to the
pending/msgsent lists. It needs to know which multi handle it belongs
to, if for example curl_easy_cleanup() is called before the handle is
removed from the multi handle.
Alll 'data->multi' pointers of handles still part of the multi handle
gets cleared by curl_multi_cleanup() which "orphans" all previously
attached easy handles.
This is take 2. The first version was reverted for the 8.0.1 release.
Assisted-by: Stefan Eissing
Closes#10801
For GOOD_EASY_HANDLE and GOOD_MULTI_HANDLE checks
- allow NULL pointers to "just" return an error as before
- fail hard on nun-NULL pointers that no longer show the MAGICs
Closes#10812
As they are not driving transfers or any socket activity, the main loop
does not need to iterate over these handles. A performance improvement.
They are instead only held in their own separate lists.
Assisted-by: Stefan Eissing
Ref: #10743Closes#10762
By letting curl_easy_header() and curl_easy_nextheader() store the
header data in their own struct storage when they return a pointer to
it, it makes it possible for applications to use them both in a loop.
Like the curl tool does.
Reported-by: Boris Okunskiy
Fixes#10704Closes#10707
The feature is rarely used so this frees up data for the vast majority
of easy handles that don't use it.
Rename "protdata" to "ftpwc" since it is always an FTP wildcard struct
pointer. Made the state struct field an unsigned char to save space.
Closes#10639
- Change readwrite_upload() to call win_update_buffer_size() no more
than once a second to update SO_SNDBUF (send buffer limit).
Prior to this change during an upload readwrite_upload() could call
win_update_buffer_size() anywhere from hundreds of times per second to
an extreme test case of 100k per second (which is likely due to a bug,
see #10618). In the latter case WPA profiler showed
win_update_buffer_size was the highest capture count in
readwrite_upload. In any case the calls were excessive and unnecessary.
Ref: https://github.com/curl/curl/pull/2762
Closes https://github.com/curl/curl/pull/10611
New cfilter HTTP-CONNECT for h3/h2/http1.1 eyeballing.
- filter is installed when `--http3` in the tool is used (or
the equivalent CURLOPT_ done in the library)
- starts a QUIC/HTTP/3 connect right away. Should that not
succeed after 100ms (subject to change), a parallel attempt
is started for HTTP/2 and HTTP/1.1 via TCP
- both attempts are subject to IPv6/IPv4 eyeballing, same
as happens for other connections
- tie timeout to the ip-version HAPPY_EYEBALLS_TIMEOUT
- use a `soft` timeout at half the value. When the soft timeout
expires, the HTTPS-CONNECT filter checks if the QUIC filter
has received any data from the server. If not, it will start
the HTTP/2 attempt.
HTTP/3(ngtcp2) improvements.
- setting call_data in all cfilter calls similar to http/2 and vtls filters
for use in callback where no stream data is available.
- returning CURLE_PARTIAL_FILE for prematurely terminated transfers
- enabling pytest test_05 for h3
- shifting functionality to "connect" UDP sockets from ngtcp2
implementation into the udp socket cfilter. Because unconnected
UDP sockets are weird. For example they error when adding to a
pollset.
HTTP/3(quiche) improvements.
- fixed upload bug in quiche implementation, now passes 251 and pytest
- error codes on stream RESET
- improved debug logs
- handling of DRAIN during connect
- limiting pending event queue
HTTP/2 cfilter improvements.
- use LOG_CF macros for dynamic logging in debug build
- fix CURLcode on RST streams to be CURLE_PARTIAL_FILE
- enable pytest test_05 for h2
- fix upload pytests and improve parallel transfer performance.
GOAWAY handling for ngtcp2/quiche
- during connect, when the remote server refuses to accept new connections
and closes immediately (so the local conn goes into DRAIN phase), the
connection is torn down and a another attempt is made after a short grace
period.
This is the behaviour observed with nghttpx when we tell it to shut
down gracefully. Tested in pytest test_03_02.
TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).
- new tests/tests-httpd/scorecard.py for testing h3/h2 protocol implementation.
Invoke:
python3 tests/tests-httpd/scorecard.py --help
for usage.
Improvements on gathering connect statistics and socket access.
- new CF_CTRL_CONN_REPORT_STATS cfilter control for having cfilters
report connection statistics. This is triggered when the connection
has completely connected.
- new void Curl_pgrsTimeWas(..) method to report a timer update with
a timestamp of when it happend. This allows for updating timers
"later", e.g. a connect statistic after full connectivity has been
reached.
- in case of HTTP eyeballing, the previous changes will update
statistics only from the filter chain that "won" the eyeballing.
- new cfilter query CF_QUERY_SOCKET for retrieving the socket used
by a filter chain.
Added methods Curl_conn_cf_get_socket() and Curl_conn_get_socket()
for convenient use of this query.
- Change VTLS backend to query their sub-filters for the socket when
checks during the handshake are made.
HTTP/3 documentation on how https eyeballing works.
TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).
Scorecard with Caddy.
- configure can be run with `--with-test-caddy=path` to specify which caddy to use for testing
- tests/tests-httpd/scorecard.py now measures download speeds with caddy
pytest improvements
- adding Makfile to clean gen dir
- adding nghttpx rundir creation on start
- checking httpd version 2.4.55 for test_05 cases where it is needed. Skipping with message if too old.
- catch exception when checking for caddy existance on system.
Closes#10349
- add test2600 as a unit test that triggers various connect conditions
and monitors behaviour, available in a debug build only.
- this exposed edge cases in connect.c that have been fixed
Closes#10312
- Curl_write_plain/Curl_read_plain have been eliminated. Last code use
now uses Curl_conn_send/recv so that requests use conn->send/revc
callbacks which defaults to cfilters use.
- Curl_recv_plain/Curl_send_plain have been internalized in cf-socket.c.
- USE_RECV_BEFORE_SEND_WORKAROUND (active on Windows) has been moved
into cf-socket.c. The pre_recv buffer is held at the socket filter
context. `postponed_data` structures have been removed from
`connectdata`.
- the hanger in HTTP/2 request handling was a result of read buffering
on all sends and the multi handling is not prepared for this. The
following happens:
- multi preforms on a HTTP/2 easy handle
- h2 reads and processes data
- this leads to a send of h2 data
- which receives and buffers before the send
- h2 returns
- multi selects on the socket, but no data arrives (its in the buffer already)
the workaround now receives data in a loop as long as there is something in
the buffer. The real fix would be for multi to change, so that `data_pending`
is evaluated before deciding to wait on the socket.
io_buffer, optional, in cf-socket.c, http/2 sets state.drain if lower
filter have pending data.
This io_buffer is only available/used when the
-DUSE_RECV_BEFORE_SEND_WORKAROUND is active, e.g. on Windows
configurations. It also maintains the original checks on protocol
handler being HTTP and conn->send/recv not being replaced.
The HTTP/2 (nghttp2) cfilter now sets data->state.drain when it finds
out that the "lower" filter chain has still pending data at the end of
its IO operation. This prevents the processing from becoming stalled.
Closes#10280
- new functions and macros for cfilter debugging
- set CURL_DEBUG with names of cfilters where debug logging should be
enabled
- use GNUC __attribute__ to enable printf format checks during compile
Closes#10271
- by using BIT() instead of bool
- imap: shrink struct
- ftp: make state 'unsigned char'
- ftp: sort ftp_conn struct entries on size
- urldata: use smaller fields for SSL version info storage
- pop3: reduce the pop3_conn struct size
- smtp: reduce the size of the smtp structs
Closes#10186
- copy `struct Curl_addrinfo` on filter setup into context
- remove `struct Curl_addrinfoi *` with `struct Curl_sockaddr_ex *` in
connectdata that is set and NULLed by the socket filter
- this means we have no reference to the resolver info in connectdata or
its filters
- trigger the CF_CTRL_CONN_INFO_UPDATE event when the complete filter
chain reaches connected status
- update easy handle connection information on CF_CTRL_DATA_SETUP event.
Closes#10213
- they are mostly pointless in all major jurisdictions
- many big corporations and projects already don't use them
- saves us from pointless churn
- git keeps history for us
- the year range is kept in COPYING
checksrc is updated to allow non-year using copyright statements
Closes#10205
The only TLS auth type libcurl ever supported is SRP and that is the
default type. Since nobody ever sets any other type, there is no point
in wasting space to store the set type and code to check the type.
If TLS auth is used, SRP is now implied.
Closes#10181
Refactoring of connection setup and happy eyeballing. Move
nghttp2. ngtcp2, quiche and msh3 into connection filters.
- eyeballing cfilter that uses sub-filters for performing parallel connects
- socket cfilter for all transport types, including QUIC
- QUIC implementations in cfilter, can now participate in eyeballing
- connection setup is more dynamic in order to adapt to what filter did
really connect. Relevant to see if a SSL filter needs to be added or
if SSL has already been provided
- HTTP/3 test cases similar to HTTP/2
- multiuse of parallel transfers for HTTP/3, tested for ngtcp2 and quiche
- Fix for data attach/detach in VTLS filters that could lead to crashes
during parallel transfers.
- Eliminating setup() methods in cfilters, no longer needed.
- Improving Curl_conn_is_alive() to replace Curl_connalive() and
integrated ssl alive checks into cfilter.
- Adding CF_CNTRL_CONN_INFO_UPDATE to tell filters to update
connection into and persist it at the easy handle.
- Several more cfilter related cleanups and moves:
- stream_weigth and dependency info is now wrapped in struct
Curl_data_priority
- Curl_data_priority members depend is available in HTTP2|HTTP3
- Curl_data_priority members depend on NGHTTP2 support
- handling init/reset/cleanup of priority part of url.c
- data->state.priority same struct, but shallow copy for compares only
- PROTOPT_STREAM has been removed
- Curl_conn_is_mulitplex() now available to check on capability
- Adding query method to connection filters.
- ngtcp2+quiche: implementing query for max concurrent transfers.
- Adding is_alive and keep_alive cfilter methods. Adding DATA_SETUP event.
- setting keepalive timestamp on connect
- DATA_SETUP is called after the connection has been completely
setup (but may not connected yet) to allow filters to initialize
data members they use.
- there is no socket to be had with msh3, it is unclear how select
shall work
- manual test via "curl --http3 https://curl.se" fail with "empty
reply from server".
- Various socket/conn related cleanups:
- Curl_socket is now Curl_socket_open and in cf-socket.c
- Curl_closesocket is now Curl_socket_close and in cf-socket.c
- Curl_ssl_use has been replaced with Cur_conn_is_ssl
- Curl_conn_tcp_accepted_set has been split into
Curl_conn_tcp_listen_set and Curl_conn_tcp_accepted_set
with a clearer purpose
Closes#10141
- source_quote, source_prequote and source_postquote have not been used since
5e0d9aea3; September 2006
- make several fields conditional on proxy support
- make three quote struct fields conditional on FTP || SSH
- make 'mime_options' depend on MIME
- make trailer_* fields depend on HTTP
- change 'gssapi_delegation' from long to unsigned char
- make 'localportrange' unsigned short instead of int
- conn->trailer now depends on HTTP
Closes#10147
The cookiefile entries are set into the handle and should remain set for
the lifetime of the handle so that duplicating it also duplicates the
list. Therefore, the struct field is moved from 'state' to 'set'.
Fixes#10133Closes#10134
This makes a big difference for cases when the rewind is not actually
necessary to perofm (for example HTTP response code 301 converts to GET)
and therefore the rewind can be avoided. In particular for situations
when that rewind fails, for example when reading from a pipe or similar.
Reported-by: Ali Utku Selen
Fixes#9735Closes#9958
- almost all backend calls pass the Curl_cfilter intance instead of
connectdata+sockindex
- ssl_connect_data is remove from struct connectdata and made internal
to vtls
- ssl_connect_data is allocated in the added filter, kept at cf->ctx
- added function to let a ssl filter access its ssl_primary_config and
ssl_config_data this selects the propert subfields in conn and data,
for filters added as plain or proxy
- adjusted all backends to use the changed api
- adjusted all backends to access config data via the exposed
functions, no longer using conn or data directly
cfilter renames for clear purpose:
- methods `Curl_conn_*(data, conn, sockindex)` work on the complete
filter chain at `sockindex` and connection `conn`.
- methods `Curl_cf_*(cf, ...)` work on a specific Curl_cfilter
instance.
- methods `Curl_conn_cf()` work on/with filter instances at a
connection.
- rebased and resolved some naming conflicts
- hostname validation (und session lookup) on SECONDARY use the same
name as on FIRST (again).
new debug macros and removing connectdata from function signatures where not
needed.
adapting schannel for new Curl_read_plain paramter.
Closes#9919
This struct field MUST remain what the application set it to, so that
handle reuse and handle duplication work.
Instead, the request state bit 'no_body' is introduced for code flows
that need to change this in run-time.
Closes#9888
- general construct/destroy in connectdata
- default implementations of callback functions
- connect: cfilters for connect and accept
- socks: cfilter for socks proxying
- http_proxy: cfilter for http proxy tunneling
- vtls: cfilters for primary and proxy ssl
- change in general handling of data/conn
- Curl_cfilter_setup() sets up filter chain based on data settings,
if none are installed by the protocol handler setup
- Curl_cfilter_connect() boot straps filters into `connected` status,
used by handlers and multi to reach further stages
- Curl_cfilter_is_connected() to check if a conn is connected,
e.g. all filters have done their work
- Curl_cfilter_get_select_socks() gets the sockets and READ/WRITE
indicators for multi select to work
- Curl_cfilter_data_pending() asks filters if the have incoming
data pending for recv
- Curl_cfilter_recv()/Curl_cfilter_send are the general callbacks
installed in conn->recv/conn->send for io handling
- Curl_cfilter_attach_data()/Curl_cfilter_detach_data() inform filters
and addition/removal of a `data` from their connection
- adding vtl functions to prevent use of Curl_ssl globals directly
in other parts of the code.
Reviewed-by: Daniel Stenberg
Closes#9855
Unlike `CONNECT`, currently we don't keep track whether `PROXY` is
already sent or not. This causes `PROXY` header to be sent twice during
`MSTATE_TUNNELING` and `MSTATE_PROTOCONNECT`.
Closes#9878Fixes#9442
Adds a new option to control the maximum time that a cached
certificate store may be retained for.
Currently only the OpenSSL backend implements support for
caching certificate stores.
Closes#9620
