A transfer with a completed download that is still uploading needs to
check the connection state when it is PAUSEd, since connection
close/errors would otherwise go unnoticed.
Reported-by: Sergey Bronnikov
Fixes#13260Closes#13271
Move all handling of HTTP's `Expect: 100-continue` feature into a client
reader. Add sending flag `KEEP_SEND_TIMED` that triggers transfer
sending on general events like a timer.
HTTP installs a `CURL_CR_PROTOCOL` reader when announcing `Expect:
100-continue`. That reader works as follows:
- on first invocation, records time, starts the `EXPIRE_100_TIMEOUT`
timer, disables `KEEP_SEND`, enables `KEEP_SEND_TIMER` and returns 0,
eos=FALSE like a paused upload.
- on subsequent invocation it checks if the timer has expired. If so, it
enables `KEEP_SEND` and switches to passing through reads to the
underlying readers.
Transfer handling's `readwrite()` will be invoked when a timer expires
(like `EXPIRE_100_TIMEOUT`) or when data from the server arrives. Seeing
`KEEP_SEND_TIMER`, it will try to upload more data, which triggers
reading from the client readers again. Which then may lead to a new
pausing or cause the upload to start.
Flags and timestamps connected to this have been moved from
`SingleRequest` into the reader's context.
Closes#13110
- add test cases for rate limiting uploads for all
http versions
- fix transfer loop handling of limits. Signal a re-receive
attempt only on exhausting maxloops without an EAGAIN
- fix `data->state.selectbits` forcing re-receive to also
set re-sending when transfer is doing this.
Reported-by: Karthikdasari0423 on github
Fixes#12559Closes#12586
- there seems to be a code path that cleans up easy handles without
triggering DONE or DETACH events to the connection filters. This
would explain wh nghttp2 still holds stream user data
- add GOOD check to easy handle used in on_close_callback to
prevent crashes, ASSERTs in debug builds.
- NULL the stream user data early before submitting RST
- add checks in on_stream_close() to identify UNGOOD easy handles
Reported-by: Hans-Christian Egtvedt
Fixes#10936Closes#12562
- refs #11342 where errors with git https interactions
were observed
- problem was caused by 1st sends of size larger than 64KB
which resulted in later retries of 64KB only
- limit sending of 1st block to 64KB
- adjust h2/h3 filters to cope with parsing the HTTP/1.1
formatted request in chunks
- introducing Curl_nwrite() as companion to Curl_write()
for the many cases where the sockindex is already known
Fixes#11342 (again)
Closes#11803
- added test cases for various code paths
- fixed handling of blocked write when stream had
been closed inbetween attempts
- re-enabled DEBUGASSERT on send with smaller data size
- in debug builds, environment variables can be set to simulate a slow
network when sending data. cf-socket.c and vquic.c support
* CURL_DBG_SOCK_WBLOCK: percentage of send() calls that should be
answered with a EAGAIN. TCP/UNIX sockets.
This is chosen randomly.
* CURL_DBG_SOCK_WPARTIAL: percentage of data that shall be written
to the network. TCP/UNIX sockets.
Example: 80 means a send with 1000 bytes would only send 800
This is applied to every send.
* CURL_DBG_QUIC_WBLOCK: percentage of send() calls that should be
answered with EAGAIN. QUIC only.
This is chosen randomly.
Closes#11756
- delete completed TODO from `./CMakeLists.txt`.
- convert a C++ comment to C89 in `./CMake/CurlTests.c`.
- delete duplicate EOLs from EOF.
- add missing EOL at EOF.
- delete whitespace at EOL (except from expected test results).
- convert tabs to spaces.
- convert CRLF EOLs to LF in GHA yaml.
- text casing fixes in `./CMakeLists.txt`.
- fix a codespell typo in `packages/OS400/initscript.sh`.
Closes#11772
- check in h2 filter recv that stream actually exists
and return error if not
- add test for parallel, extreme h2 upgrades that fail if
connections get reused before fully switched
- add h2 upgrade upload test just for completeness
Closes#11563
- doing a POST with `--digest` does an override on the initial request
with `Content-Length: 0`, but the http2 filter was unaware of that
and expected the originally request body. It did therefore not
send a final DATA frame with EOF flag to the server.
- The fix overrides any initial notion of post size when the `done_send`
event is triggered by the transfer loop, leading to the EOF that
is necessary.
- refs #11194. The fault did not happen in testing, as Apache httpd
never tries to read the request body of the initial request,
sends the 401 reply and closes the stream. The server used in the
reported issue however tried to read the EOF and timed out on the
request.
Reported-by: Aleksander Mazur
Fixes#11194
Cloes #11200
- refs #11157 and #11175 where uploads get stuck or lead to RST streams
- fixes our h2 send behaviour to continue sending in the nghttp2 session
as long as it wants to. This will empty our send buffer as long as
the remote stream/connection window allows.
- in case the window is exhausted, the data remaining in the send buffer
will wait for a WINDOW_UPDATE from the server. Which is a socket event
that engages our transfer loop again
- the problem in the issue was that we did not exhaust the window, but
left data in the sendbuffer and no further socket events did happen.
The server was just waiting for us to send more.
- relatedly, there was an issue fixed that closing a stream with KEEP_HOLD
set kept the transfer from shutting down - as it should have - leading
to a timeout.
Closes#11176
Make send buffer smaller to have progress and "upload done" reporting
closer to reality. Fix handling of send "drain" condition to no longer
trigger once the transfer loop reports it is done sending. Also do not
trigger the send "drain" on RST streams.
Background:
- a upload stall was reported in #11157 that timed out
- test_07_33a reproduces a problem with such a stall if the
server 404s the request and RSTs the stream.
- test_07_33b verifies a successful PUT, using the parameters
from #11157 and checks success
Ref: #11157Closes#11165
- currently only on debug build and when env variable
CURL_PROXY_TUNNEL_H2 is present.
- will ALPN negotiate with the proxy server and switch
tunnel filter based on the protocol negotiated.
- http/1.1 tunnel code moved into cf-h1-proxy.[ch]
- http/2 tunnel code implemented in cf-h2-proxy.[ch]
- tunnel start and ALPN set remains in http_proxy.c
- moving all haproxy related code into cf-haproxy.[ch]
VTLS changes
- SSL filters rely solely on the "alpn" specification they
are created with and no longer check conn->bits.tls_enable_alpn.
- checks on which ALPN specification to use (or none at all) are
done in vtls.c when creating the filter.
Testing
- added a nghttpx forward proxy to the pytest setup that
speaks HTTP/2 and forwards all requests to the Apache httpd
forward proxy server.
- extending test coverage in test_10 cases
- adding proxy tests for direct/tunnel h1/h2 use of basic auth.
- adding test for http/1.1 and h2 proxy tunneling to pytest
Closes#10780
- ngtcp2: using bufq for recv stream data
- internal stream_ctx instead of `struct HTTP` members
for quiche, ngtcp2 and msh3
- no more QUIC related members in `struct HTTP`
- experimental use of recvmmsg(), disabled by default
- testing on my old debian box shows no throughput improvements.
- leaving it in, but disabled, for future revisit
- vquic: common UDP receive code for ngtcp2 and quiche
- vquic: common UDP send code for ngtcp2 and quiche
- added pytest skips for known msh3 failures
- fix unit2601 to survive torture testing
- quiche: using latest `master` from quiche and enabling large download
tests, now that key change is supported
- fixing test_07_21 where retry handling of starting a stream
was faulty
- msh3: use bufq for recv buffering headers and data
- msh3: replace fprintf debug logging with LOG_CF where possible
- msh3: force QUIC expire timers on recv/send to have more than
1 request per second served
Closes#10772
- use bufq for send/receive of network data
- usd bufq for send/receive of stream data
- use HTTP/2 flow control with no-auto updates to control the
amount of data we are buffering for a stream
HTTP/2 stream window set to 128K after local tests, defined
code constant for now
- elminiating PAUSEing nghttp2 processing when receiving data
since a stream can now take in all DATA nghttp2 forwards
Improved scorecard and adjuste http2 stream window sizes
- scorecard improved output formatting and options default
- scorecard now also benchmarks small requests / second
Closes#10771
- will check built curl for http and https support and
skip all tests if not there
- will dump stdout/stderr/trace output on errored responses
Closes#10829
- added to: ngtcp2-quictls, ngtcp2-gnutls and the linux varians
quiche, bearssl, libressl, mbedtls, openssl3, rustls
- added disabled in ngtcp2-wolfssl due to weird SSL_connect() errors
not reproducable locally
Improvements on pytest:
- handling of systems with nghttpx in $PATH
- configure will seach $PATH got nghttpx used in pytest
- pytest fixes for managing nghttpx without h3 support
- ngtcp2-wolfssl: use a fully enabled wolfssl build
- lower parallel count for http/1.1 tests, since we do not
want to test excessive connections.
- check built curl for HTTPS-proxy support in proxy tests
- bearssl does not like one of our critical cert extensions, making
it non-critical now
- bearssl is too slow for test_12, skipping
- making sure we do h3 tests only when curl and server support is there
Closes#10699
- httpd is only one server we test with
- the suite coveres the HTTP protocol in general where
the default test cases need a more beefy environment
Closes#10654
