- Replace `Github` with `GitHub`.
- Replace `windows` with `Windows`
- Replace `advice` with `advise` where a verb is used.
- A few fixes on removing repeated words.
- Replace `a HTTP` with `an HTTP`
Closes#9802
For both IPv4 and IPv6 addresses. Now also checks IPv6 addresses "correctly"
and not with string comparisons.
Split out the noproxy checks and functionality into noproxy.c
Added unit test 1614 to verify checking functions.
Reported-by: Mathieu Carbonneaux
Fixes#9773Fixes#5745Closes#9775
The keyword specifies how option works when specified multiple times:
- single: the last provided value replaces the earlier ones
- append: it supports being provided multiple times
- boolean: on/off values
- mutex: flag-like option that disable anoter flag
The 'gen.pl' script then outputs the proper and unified language for
each option's multi-use behavior in the generated man page.
The multi: header is requires in each .d file and will cause build error
if missing or set to an unknown value.
Closes#9759
They were previously (erroneously) added manually to tool_listhelp.c
which would make them get removed again when the file is updated next
time, unless added correctly here in header.d
Follow-up to 2437fac01Closes#9690
"You never needed a pass phrase" reads like it's about to be followed by
something like "until version so-and-so", but that is not what is
intended. Change to "You never need a pass phrase". There are two
instances of this text, so make sure to update both.
curl_ws_recv() now receives data to fill up the provided buffer, but can
return a partial fragment. The function now also get a pointer to a
curl_ws_frame struct with metadata that also mentions the offset and
total size of the fragment (of which you might be receiving a smaller
piece). This way, large incoming fragments will be "streamed" to the
application. When the curl_ws_frame struct field 'bytesleft' is 0, the
final fragment piece has been delivered.
curl_ws_recv() was also adjusted to work with a buffer size smaller than
the fragment size. (Possibly needless to say as the fragment size can
now be 63 bit large).
curl_ws_send() now supports sending a piece of a fragment, in a
streaming manner, in addition to sending the entire fragment in a single
call if it is small enough. To send a huge fragment, curl_ws_send() can
be used to send it in many small calls by first telling libcurl about
the total expected fragment size, and then send the payload in N number
of separate invokes and libcurl will stream those over the wire.
The struct curl_ws_meta() returns is now called 'curl_ws_frame' and it
has been extended with two new fields: *offset* and *bytesleft*. To help
describe the passed on data chunk when a fragment is delivered in many
smaller pieces.
The documentation has been updated accordingly.
Closes#9636
Example programs targeting a deprecated feature/option are commented with
a warning about it.
Other examples are adapted to not use deprecated options.
Closes#9661
The former way that also suggested using a non-existing file to just
enable the cookie engine could lead to developers maybe a bit carelessly
guessing a file name that will not exist, and then in a future due to
circumstances, such a file could be made to exist and then accidentally
libcurl would read cookies not actually meant to.
Reported-by: Trail of bits
Closes#9654
After this patch, we reduce the three copies of most `Makefile.m32`
logic to one. This now resides in `lib/Makefile.m32`. It makes future
updates easier, the code shorter, with a small amount of added
complexity.
`Makefile.m32` reduction:
| | bytes | LOC total | blank | comment | code |
|-------------------|-------:|----------:|-------:|---------:|------:|
| 7.85.0 | 34772 | 1337 | 79 | 192 | 1066 |
| before this patch | 17601 | 625 | 62 | 106 | 457 |
| after this patch | 11680 | 392 | 52 | 104 | 236 |
Details:
- Change rules to create objects for the `v*` subdirs in the `lib` dir.
This allows to use a shared compile rule and assumes that filenames
are not (and will not be) colliding across these directories.
`Makefile.m32` now also stores a list of these subdirs. They are
changing rarely though.
- Sync as much as possible between the three `Makefile.m32` scripts'
rules and their source/target sections.
- After this patch `CPPFLAGS` are all applied to the `src` sources once
again. This matches the behaviour of cmake/autotools. Only zlib ones
are actually required there.
- Use `.rc` names from `Makefile.inc` instead of keeping a duplicate.
- Change examples to link `libcurl.dll` by default. This makes building
trivial, even as a cross-build:
`CC=x86_64-w64-mingw32-gcc make -f Makefile.m32`
To run them, you need to move/copy or add-to-path `libcurl.dll`.
You can select static mode via `CFG=-static`.
- List more of the `Makefile.m32` config variables.
- Drop `.rc` support from examples. It made it fragile without much
benefit.
- Include a necessary system lib for the `externalsocket.c` example.
- Exclude unnecessary systems libs when building in `-dyn` mode.
Closes#9642
This patch overhauls `Makefile.m32` scripts, fixing a list of quirks,
making its behaviour and customization envvars align better with other
build systems, aiming for less code, that is easier to read, use and
maintain.
Details:
- Rename customization envvars:
`CURL_CC` -> `CC`
`CURL_RC` -> `RC`
`CURL_AR` -> `AR`
`CURL_LDFLAG_EXTRAS_DLL` -> `CURL_LDFLAGS_LIB`
`CURL_LDFLAG_EXTRAS_EXE` -> `CURL_LDFLAGS_BIN`
- Drop `CURL_STRIP` and `CURL_RANLIB`. These tools are no longer used.
- Accept `CFLAGS`, `CPPFLAGS`, `RCFLAGS`, `LDFLAGS` and `LIBS` envvars.
- Drop `CURL_CFLAG_EXTRAS`, `CURL_LDFLAG_EXTRAS`, `CURL_RCFLAG_EXTRAS` in
favor of the above.
- Do not automatically enable `zlib` with `libssh2`. `zlib` is optional
with `libssh2`.
- Omit unnecessary `CPPFLAGS` options when building `curl.exe` and
examples.
- Drop support for deprecated `-winssl` `CFG` option. Use `-schannel`
instead.
- Avoid late evaluation where not necessary (`=` -> `:=`).
- Drop support for `CURL_DLL_A_SUFFIX` to override the implib suffix.
Instead, use the standard naming scheme by default: `libcurl.dll.a`.
The toolchain recognizes the name, and selects it automatically when
asking for a `-shared` vs. `-static` build.
- Stop applying `strip` to `libcurl.a`. Follow-up from
16a58e9f93. There was no debug info to
strip since then.
- Stop setting `-O3`, `-W`, `-Wall` options. You can add these to
`CFLAGS` as desired.
- Always enable `-DCURL_DISABLE_OPENSSL_AUTO_LOAD_CONFIG` with OpenSSL,
to avoid that vulnerability on Windows.
- Add `-lbrotlicommon` to `LIBS` when using `brotli`.
- Do not enable `-nghttp3` without `-ngtcp2`.
- `-ssh2` and `-rtmp` options no longer try to auto-select a TLS-backend.
You need to set the backend explicitly. This scales better and avoids
issues with certain combinations (e.g. `libssh2` + `wolfssl` with no
`schannel`).
- Default to OpenSSL TLS-backend with `ngtcp2`. Possible to override via
`NGTCP2_LIBS`.
- Old, alternate method of enabling components (e.g. `SSH2=1`) no longer
supported.
- Delete `SPNEGO` references. They were no-ops.
- Drop support for Win9x environments.
- Allow setting `OPENSSL_LIBS` independently from `OPENSSL_LIBPATH`.
- Support autotools/CMake `libssh2` builds by default.
- Respect `CURL_DLL_SUFFIX` in `-dyn` mode when building `curl.exe` and
examples.
- Assume standard directory layout with `LIBCARES_PATH`. (Instead of the
long gone embedded one.)
- Stop static linking with c-ares by default. Add
`CPPFLAGS=-DCARES_STATICLIB` to enable it.
- Reorganize internal layout to avoid redundancy and emit clean diffs
between src/lib and example make files.
- Delete unused variables.
- Code cleanups/rework.
- Comment and indentation fixes.
Closes#9632
- Drop auto-detection of OpenSSL 1.0.2 and earlier. Now always defaulting
to OpenSSL 1.1.0 and later, LibreSSL and BoringSSL.
- Drop `Invalid path to OpenSSL package` detection. OpenSSL has been
using a standard file layout since 1.1.0, so this seems unnecessary
now.
- Drop special logic to enable Novell LDAP SDK support.
- Drop special logic to enable OpenLDAP LDAP SDK support. This seems
to be distinct from native OpenLDAP, with support implemented inside
`lib/ldap.c` (vs. `lib/openldap.c`) back when the latter did not exist
yet in curl.
- Add `-lwldap32` only if there is no other LDAP library (either native
OpenLDAP, or SDKs above) present.
- Update `doc/INSTALL.md` accordingly.
After this patch, it's necessary to make configration changes when using
OpenSSL 1.0.2 or earlier, or the two LDAP SDKs.
OpenSSL 1.0.2 and earlier:
```
export OPENSSL_INCLUDE = <path-to-openssl>/outinc
export OPENSSL_LIBPATH = <path-to-openssl>/out
export OPENSSL_LIBS = -lssl32 -leay32 -lgdi32
```
Novell LDAP SDK, previously enabled via `USE_LDAP_NOVELL=1`:
```
export CURL_CFLAG_EXTRAS = -I<path-to-sdk>/inc -DCURL_HAS_NOVELL_LDAPSDK
export CURL_LDFLAG_EXTRAS = -L<path-to-sdk>/lib/mscvc -lldapsdk -lldapssl -lldapx
```
OpenLDAP LDAP SDK, previously enabled via `USE_LDAP_OPENLDAP=1`:
```
export CURL_CFLAG_EXTRAS = -I<path-to-sdk>/include -DCURL_HAS_OPENLDAP_LDAPSDK
export CURL_LDFLAG_EXTRAS = -L<path-to-sdk>/lib -lldap -llber
```
I haven't tested these scenarios, and in general we recommend using
a recent OpenSSL release. Also, WinLDAP (the Windows default) and
OpenLDAP (via `-DUSE_OPENLDAP`) are the LDAP options actively worked on
in curl.
Closes#9631
SourceForge projects can now choose between two hostnames, with .io and
.net ending. Both support HTTPS by default now. Opening the other variant
will perm-redirected to the one chosen by the project.
The .io -> .net redirection is done insecurely.
Let's update the URLs to point to the current canonical endpoints to
avoid any redirects.
Closes#9630
- Add `-lcrypt32` once, and add it always for simplicity.
- Delete broken link and reference to the pre-Vista WinIDN add-on.
MS no longer distribute it.
- Delete related `WINIDN_PATH` option. IDN is a system lib since Vista.
- Sync `LIBCARES_PATH` default with the rest of dependencies.
- Delete version numbers from dependency path defaults.
- `libgsasl` package is now called `gsasl`.
- Delete `libexpat` and `libxml2` references. No longer used by curl.
- Delete `Edit the path below...` comments. We recommend to predefine
those envvars instead.
- `libcares.a` is not an internal dependency anymore. Stop using it as
such.
- `windres` `--include-dir` -> `-I`, `-F` -> `--target=` for readability.
- Delete `STRIP`, `CURL_STRIP`, `AR` references from `src/Makefile.m32`.
They were never used.
- Stop to `clean` some objects twice in `src/Makefile.m32`.
- Delete cvs-specific leftovers.
- Finish resource support in examples make file.
- Delete `-I<root>/lib` from examples make file.
- Fix copyright start year in examples make file.
- Delete duplicate `ftpuploadresume` input in examples make file.
- Sync OpenSSL lib order, `SYNC` support, `PROOT` use, dependency path
defaults, variables names and other internal bits between the three
make files.
- `lib/Makefile.m32` accepted custom options via `DLL_LIBS` envvar. This
was lib-specific and possibly accidental. Use `CURL_LDFLAG_EXTRAS_DLL`
envvar for the same effect.
- Fix linking `curl.exe` and examples to wrong static libs with
auto-detected OpenSSL 1.0.2 or earlier.
- Add `-lgdi32` for OpenSSL 1.0.2 and earlier only.
- Add link to Novell LDAP SDK and use a relative default path. Latest
version is from 2016, linked to an outdated OpenSSL 1.0.1.
- Whitespace and comment cleanups.
TODO in a next commit:
Delete built-in detection/logic for OpenSSL 1.0.2 and earlier, the Novell
LDAP SDK and the other LDAP SDK (which is _not_ OpenLDAP). Write up the
necessary custom envvars to configure them.
Closes#9616
The introduction of CURL_DISABLE_MIME came with some additional bugs:
- Disabled MIME is compiled-in anyway if SMTP and/or IMAP is enabled.
- CURLOPT_MIMEPOST, CURLOPT_MIME_OPTIONS and CURLOPT_HTTPHEADER are
conditioned on HTTP, although also needed for SMTP and IMAP MIME mail
uploads.
In addition, the CURLOPT_HTTPHEADER and --header documentation does not
mention their use for MIME mail.
This commit fixes the problems above.
Closes#9610
If curl_off_t turns out to be smaller than 8 bytes,
--with-n64-deprecated needs to be used to allow the build to
continue. This is to highlight the fact that support for such builds is
going away next year.
Also mentioned in DEPRECATED.md
Closes#9605
The example program chkspeed uses strncasecmp() which is not portable
across systems. Replace calls to this function by tests on characters.
Closes#9562
httpput-postfields.c:41:3: error: string length ‘522’ is greater than the length ‘509’ ISO C90 compilers are required to support [-Woverlength-strings]
41 | "this chapter.";
| ^~~~~~~~~~~~~~~
Closes#9555
This is how the RFC calls the protocol. Also rename the file in docs/ to
WEBSOCKET.md in uppercase to match how we have done it for many other
protocol docs in similar fashion.
Add the WebSocket docs to the tarball.
Closes#9496
Slightly faster with more robust code. Uses fewer and smaller mallocs.
- remove two fields from the URL handle struct
- reduce copies and allocs
- use dynbuf buffers more instead of custom malloc + copies
- uses dynbuf to build the host name in reduces serial alloc+free within
the same function.
- move dedotdotify into urlapi.c and make it static, not strdup the input
and optimize it by checking for . and / before using strncmp
- remove a few strlen() calls
- add Curl_dyn_setlen() that can "trim" an existing dynbuf
Closes#9408
Next Protocol Negotiation is a TLS extension that was created and used
for agreeing to use the SPDY protocol (the precursor to HTTP/2) for
HTTPS. In the early days of HTTP/2, before the spec was finalized and
shipped, the protocol could be enabled using this extension with some
servers.
curl supports the NPN extension with some TLS backends since then, with
a command line option `--npn` and in libcurl with
`CURLOPT_SSL_ENABLE_NPN`.
HTTP/2 proper is made to use the ALPN (Application-Layer Protocol
Negotiation) extension and the NPN extension has no purposes
anymore. The HTTP/2 spec was published in May 2015.
Today, use of NPN in the wild should be extremely rare and most likely
totally extinct. Chrome removed NPN support in Chrome 51, shipped in
June 2016. Removed in Firefox 53, April 2017.
Closes#9307
Lintian (on Debian) has been complaining about this for a while but
I didn't bother initially as the groff parser that we use is not
affected by this.
But I have now noticed that the online manpage is affected by it:
https://curl.se/libcurl/c/CURLOPT_WILDCARDMATCH.html
(I'm using double quotes for quoting-only down below)
The section that should be parsed as "'\'" ends up being parsed as
"'´".
This is due to roffit not parsing "'\\'" correctly, which is fine
as the "correct" way of writing "'\'" is "'\e'" instead.
Note that this fix is not enough to fix the online manpage at
curl's website, as roffit seems to parse it wrongly either way.
My intent is to at least fix the manpage so that roffit can
be changed to parse "'\e'" correctly (although I suggest making
roffit parse both ways correctly, since that's what groff does).
More details at:
https://bugs.debian.org/966803930b18e4b2/tags/a/acute-accent-in-manual-page.tagCloses#9418
As "(aq" and "(dq" to prevent them from implying a meaning in the nroff
output. This removes the need for using \& escapes in the .d files'
description parts.
Closes#9352
Before this patch `-nghttp3`/`-ngtcp2` had an effect only when `-ssl`
was also enabled. `-ssl` meaning OpenSSL (and its forks). After
8a13be227e nghttp3/ngtcp2 can also be
used together with wolfSSL. This patch adds the ability to enable
`-nghttp3`/`-ngtcp2` independently from `-ssl` (OpenSSL), allowing to
use it with wolfSSL or other, future TLS backends.
Before this patch, it was fine to enable `-nghttp3`/`-ngtcp2`
unconditionally. After this patch, this is no longer the case, and now
it's the user's responsibility to enable `-nghttp3`/`-ngtcp2` only
together with a compatible TLS backend.
When using a TLS backend other than OpenSSL, the TLS-specific ngtcp2
library must be configured manually, e.g.:
`export CURL_LDFLAG_EXTRAS=-lngtcp2_crypto_wolfssl`
(or via `NGTCP2_LIBS`)
Closes#9314
- based on ngtcp2 PR https://github.com/ngtcp2/ngtcp2/pull/505
- configure adapted to build against ngtcp2 wolfssl crypto lib
- quic code added for creation of WOLFSSL* instances
Closes#9290
The example was missing a "--form" argument
I also replaced "--form" with "-F" to shorten the line a bit since it
was already very long.
And I also moved --form-escape from the "post" category to the "upload"
category (this is what I originally wanted to fix, before also noticing
the mistake in the example).
Closes#9298
This commit adds the dns category to the --resolve command line option,
because it can be interpreted as both: a low-level connection option and
an option related to the resolving of a hostname.
It is also not common for dns options to belong to the connection
category and vice versa. --ipv4 and --ipv6 are both good examples.
Closes#9229
- Support TLS 1.3 as the default max TLS version for Windows Server 2022
and Windows 11.
- Support specifying TLS 1.3 ciphers via existing option
CURLOPT_TLS13_CIPHERS (tool: --tls13-ciphers).
Closes https://github.com/curl/curl/pull/8419
On some systems, the gen.pl script takes nearly two minutes for the
generation of the main-page, which is a completely unacceptable time.
The slow performance has two causes:
1. Use of a regex locale operator
2. Useless invokations of loops
The commit addresses the first issue by replacing the "\W" wiht
[^a-zA-Z0-9_], which is, according to regex101.com, functionally
equivalent to the previous operation, except that it is obviously
limited to ASCII only, which is fine, as the curl project is
English-only anyway.
The second issue is being addressed by only running the loop if the line
contains a "--" in it. The loop may be completeley removed in the
future.
Co-authored-by: Emanuele Torre <torreemanuele6@gmail.com>
See #8299Fixes#9230Closes#9232
They allow to override the hardcoded values for the `windres` and `strip`
tools, complementing the existing set of `CURL_{CC,AR,RANLIB}` variables.
`CURL_RC` comes handy when using LLVM tools with `CROSSPREFIX=llvm-` and
`CURL_CC=clang` set on current latest debian:unstable or earlier, where
`llvm-windres` is missing, and a `CURL_RC=<triplet>-windres` fixes it.
Hopefully this will be fixed in the llvm package. FWIW `llvm-windres`
does exist in Homebrew llvm, MSYS2 llvm and llvm-mingw.
Reviewed-by: Daniel Stenberg
Closes#9132
Makefile.m32's ngtcp2 has its two libs hardwired for OpenSSL.
Add `NGTCP2_LIBS` envvar to override them with a custom list,
making it possible to use BoringSSL, or any other backend.
Closes#9109
Starting now, CURLOPT_FTP_RESPONSE_TIMEOUT is the alias instead of the
other way around.
Since 7.20.0, CURLOPT_SERVER_RESPONSE_TIMEOUT has existed as an alias
but since the option is for more protocols than FTP the more "correct"
version of the option is the "server" one so now we switch.
Closes#9104
When building curl for target platform other than x64 and x86, it is now
possible to pass `ARCH=custom`, that will omit all hardcoded logic for
setting up CFLAGS/LDFLAGS/RCFLAGS for these platforms, and let these be
customized via `CURL_CFLAG_EXTRAS`, `CURL_LDFLAG_EXTRAS`, and a newly
added one for the resource compiler: `CURL_RCFLAG_EXTRAS`.
This makes it possible to use `makefile.m32` to build for ARM64 for
example.
Reviewed-by: Daniel Stenberg
Closes#9092
- Use the Windows API to seed the fallback random generator.
This ensures to always have a random seed, even when libcurl is built
with a vtls backend lacking a random generator API, such as rustls
(experimental), GSKit and certain mbedTLS builds, or, when libcurl is
built without a TLS backend. We reuse the Windows-specific random
function from the Schannel backend.
- Implement support for `BCryptGenRandom()` [1] on Windows, as a
replacement for the deprecated `CryptGenRandom()` [2] function.
It is used as the secure random generator for Schannel, and also to
provide entropy for libcurl's fallback random generator. The new
function is supported on Vista and newer via its `bcrypt.dll`. It is
used automatically when building for supported versions. It also works
in UWP apps (the old function did not).
- Clear entropy buffer before calling the Windows random generator.
This avoids using arbitrary application memory as entropy (with
`CryptGenRandom()`) and makes sure to return in a predictable state
when an API call fails.
[1] https://docs.microsoft.com/windows/win32/api/bcrypt/nf-bcrypt-bcryptgenrandom
[2] https://docs.microsoft.com/windows/win32/api/wincrypt/nf-wincrypt-cryptgenrandomCloses#9027
... as replacements for deprecated CURLOPT_PROTOCOLS and
CURLOPT_REDIR_PROTOCOLS as these new ones do not risk running into the
32 bit limit the old ones are facing.
CURLINFO_PROTCOOL is now deprecated.
The curl tool is updated to use the new options.
Added test 1597 to verify the libcurl protocol parser.
Closes#8992
During the packaging of the latest curl release for Debian, Lintian
warned me about a typo which causes the section name "Secrets in memory"
to not be rendered in the manpage due to "SH_" not being recognized as a
header.
Closes#9057
Since this [1] commit in 2011, `_WIN32_WINNT` was set fixed to Windows
XP when the `-ipv6` option is selected. Maybe this was added to support
pre-XP Windows versions (?). These days libcurl builds fine for both XP
and post-XP versions with IPv6 support enabled. The relevance of pre-XP
version is also low by now. Other build methods also do not impose such
limitation for a similar configuration. So, drop this hard-wired
`_WIN32_WINNT` limit from `Makefile.m32`, thus building for the default
Windows version set by the compiler. This is Vista for recent MinGW
versions.
Old behaviour can be restored by setting this envvar:
export CURL_CFLAG_EXTRAS=-D_WIN32_WINNT=0x0501
[1] 98a61d8e2eCloses#9035
.. and update some docs to explain curl_global_* is now thread-safe.
Follow-up to 23af112 which made curl_global_init/cleanup thread-safe.
Closes https://github.com/curl/curl/pull/9016
- Remove misleading text that says progress function "gets called at
least once per second, even if the connection is paused."
The progress function behavior is more nuanced and the user is better
served reading the progress function doc rather than attempt to explain
it in the curl_easy_pause doc.
The progress function can only be called at least once per second if an
appropriate multi transfer function is called (eg curl_multi_perform) in
that time. For a paused transfer there may not be such a call. Rather
than explain this in detail in the curl_easy_pause doc, rely on the user
reading the CURLOPT_PROGRESSFUNCTION doc.
Ref: https://github.com/curl/curl/issues/8983
Closes https://github.com/curl/curl/pull/9015
Referring to Daniel's article [1], making the init function thread-safe
was the last bit to make libcurl thread-safe as a whole. So the name of
the feature may as well be the more concise 'threadsafe', also telling
the story that libcurl is now fully thread-safe, not just its init
function. Chances are high that libcurl wants to remain so in the
future, so there is little likelihood of ever needing any other distinct
`threadsafe-<name>` feature flags.
For consistency we also shorten `CURL_VERSION_THREADSAFE_INIT` to
`CURL_VERSION_THREADSAFE`, update its description and reference libcurl's
thread safety documentation.
[1]: https://daniel.haxx.se/blog/2022/06/08/making-libcurl-init-more-thread-safe/
Reviewed-by: Daniel Stenberg
Reviewed-by: Jay Satiro
Closes#8989
Add licensing and copyright information for all files in this repository. This
either happens in the file itself as a comment header or in the file
`.reuse/dep5`.
This commit also adds a Github workflow to check pull requests and adapts
copyright.pl to the changes.
Closes#8869
Adds two new error codes: CURLE_UNRECOVERABLE_POLL and
CURLM_UNRECOVERABLE_POLL one each for the easy and the multi interfaces.
Reported-by: Harry Sintonen
Fixes#8921Closes#8961
The e-mail link in the advice contains instructions that are prone to
error. We need an example that works and can demonstrate how to properly
perform a ranged upload, and then we can refer to that example instead.
Bug: https://github.com/curl/curl/issues/8969
Reported-by: Simon Berger
Closes https://github.com/curl/curl/pull/8970
This flag can be used to make sure that curl_global_init() is
thread-safe.
This can be useful for libraries that can't control what other
dependencies are doing with Curl.
Closes#8680
To simplify the license situation, as they were the only files in the
source tree using these specific BSD-3 clause licenses.
For an fopen style API, we recommend instead going
https://github.com/curl/fcurl
Ref: #8869Closes#8949
The callback set by CURLOPT_SSH_HOSTKEYFUNCTION is called to check
wether or not the connection should continue.
The host key is passed in argument with a custom handle for the
application.
It overrides CURLOPT_SSH_KNOWNHOSTS
Closes#7959
A pull request sent to the project might get labeled `needs-votes` by a
project maintainer. This label means that in addition to meeting all
other checks and qualifications this pull request must also receive
proven support/thumbs-ups from more community members to be considered
for merging.
Closes#8910
Folded header lines will now get passed through like before. The headers
API is adapted and will provide the content unfolded.
Added test 1274 and extended test 1940 to verify.
Reported-by: Petr Pisar
Fixes#8844Closes#8899
- `-D_AMD64_` has not been necessary for mingw-w64 builds for a long time now.
- `-fno-strict-aliasing` is mentioned for Intel C compiler in autotools, and
I used this with VxWorks in another project, but otherwise this isn't
necessary anymore as a default. If a target still needs it, it can be
added with `CURL_CFLAG_EXTRAS=-fno-strict-aliasing`
- bump up default optimization level to `-O3` (from `-O2`), and also rearrange
option order so the default can now be overridden via
`CURL_CFLAG_EXTRAS`.
- delete `-g` (generate debug info) from `CFLAGS` and `-s` from `LDFLAGS`
(strip debug info). They were working against each other. Now, if someone
needs debug info, it can be enabled via `CURL_CFLAG_EXTRAS=-g`
Closes#8904
Prior to this change the doc said --max-time set the maximum time of the
'whole operation' which is not accurate. The option maps to
CURLOPT_TIMEOUT_MS which sets maximum transfer time.
For example, the maximum time on a transfer is reset if the transfer is
retried (--retry).
Reported-by: Nuru@users.noreply.github.com
Fixes https://github.com/curl/curl/issues/8877Closes#8879
yassl was added in commit 9d904ee41b but is no longer available
and is thus not a library to use for NTLM. This aligns the FEATURES
doc with the FAQ.
Closes: #8886
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
The empty left-behind footnote confused the website rendering into
creating a nested emoty list, making the resulting page look quite
odd. Remove and re-order the remaining ones to avoid a gap in the
sequence.
Closes: #8886
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
curl is a tool that support many different things, and it doesn't
really seem like our job to tell other what to use (as they might
not have much say in the matter even). Also tidy up wording.
Closes: #8886
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Usage:
curl -x "socks5h://localhost/run/tor/socks" "https://example.com"
Updated runtests.pl to run a socksd server listening on unix socket
Added tests test1467 test1468
Added documentation for proxy command line option and socks proxy
options
Closes#8668
Dedicated - paid for - security audits that are performed in
collaboration with curl developers are not eligible for bounties.
(plus I changed the sub-titles to use ## instead of # in the markdown)
Closes#8880
These two options were only ever used for the OpenSSL backend for
versions before 1.1.0. They were never used for other backends and they
are not used with recent OpenSSL versions. They were never used much by
applications.
The defines RANDOM_FILE and EGD_SOCKET can still be set at build-time
for ancient EOL OpenSSL versions.
Closes#8670
The API documentation for the MIME functions specify that the parts
can be set twice, with the last call winning. While true, the user
can set the parts n times for n > 2, reword to specify multiple API
calls instead.
Closes: #8860
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
- Windows command prompt doesn't use literal quoting via single quotes.
- Windows command prompt inner double quotes are escaped with a
backslash.
- Windows powershell does use single quotes but curl is not a powershell
script so the arguments may not be passed on correctly.
- Windows powershell inner double quotes seems can be passed to curl if
the outer quotes are double quotes and an escape of backslash-backtick
is used.
Command prompt example:
~~~
getargs -v -d "\"a\""
argv[0]: getargs
argv[1]: -v
argv[2]: -d
argv[3]: "a"
~~~
Ref: https://github.com/curl/curl/issues/8818
Ref: https://gist.github.com/jay/19aba48653bd591cf4b90eb9249a302c
Reported-by: KotlinIsland@users.noreply.github.com
Closes https://github.com/curl/curl/pull/8823
Commit 980a47b42 added support for ignoring session cookies, but it
was never added to the documentation.
Closes: #8795
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Instead of saying "This option overrides NNN", now say "This option is
mutually exclusive to NNN" in the generated man page ouput, as the
option does not in all cases actually override the others but they are
always mutually exclusive.
Ref: #8704Closes#8716
Multiple share examples were missing a semicolon on the line defining
the CURLSHcode variable.
Closes: #8697
Reported-by: Michael Kaufmann <mail@michael-kaufmann.ch>
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Mostly based on recent language decisions from "everything curl":
- remove contractions (isn't => is not)
- *an* HTTP (consistency)
- runtime (no hyphen)
- backend (no hyphen)
- URL is uppercase
Closes#8646
Move checksrc.pl, firefox-db2pem.sh and mk-ca-bundle.pl since they don't
particularly belong in lib/
Also created an EXTRA_DIST= in scripts/Makefile.am instead of specifying
those files in the root Makefile.am
Closes#8625
Make tests require h2c feature present to run, and only set h2c if
nghttp2 is used in the build. Hyper does not support it.
Remove those tests from DISABLED
Fixes#8605Closes#8613
If a transfer returns an error, using this option makes curl remove the
leftover downloded (partial) local file before exiting.
Added test 376 to verify
Closes#8503
