Use these words and casing more consistently across text, comments and
one curl tool output:
AIX, ALPN, ANSI, BSD, Cygwin, Darwin, FreeBSD, GitHub, HP-UX, Linux,
macOS, MS-DOS, MSYS, MinGW, NTLM, POSIX, Solaris, UNIX, Unix, Unicode,
WINE, WebDAV, Win32, winbind, WinIDN, Windows, Windows CE, Winsock.
Mostly OS names and a few more.
Also a couple of other minor text fixups.
Closes#14360
Adds a `bool eos` flag to send methods to indicate that the data
is the last chunk the invovled transfer wants to send to the server.
This will help protocol filters like HTTP/2 and 3 to forward the
stream's EOF flag and also allow to EAGAIN such calls when buffers
are not yet fully flushed.
Closes#14220
Adds a `bool eos` flag to send methods to indicate that the data is the
last chunk the invovled transfer wants to send to the server.
This will help protocol filters like HTTP/2 and 3 to forward the
stream's EOF flag and also allow to EAGAIN such calls when buffers are
not yet fully flushed.
Closes#14220
Based on the standards and guidelines we use for our documentation.
- expand contractions (they're => they are etc)
- host name = > hostname
- file name => filename
- user name = username
- man page => manpage
- run-time => runtime
- set-up => setup
- back-end => backend
- a HTTP => an HTTP
- Two spaces after a period => one space after period
Closes#14073
- Move all the "upload_done" handling to request.c
- add possibility to abort sending of a request
- add `Curl_req_done_sending()` for checks
- transfer.c: readwrite_upload() now clean
- removing data->state.ulbuf and data->req.upload_fromhere
- as well as data->req.upload_present
- set data->req.upload_done on having read all from
the client and completely flushed the send buffer
- tftp, remove setting of data->req.upload_fromhere
- serves no purpose as `upload_present` is not set
and the data itself is directly `sendto()` anyway
- smtp, make upload EOB conversion a client reader
- xfer_ulbuf addition
- add xfer_ulbuf for borrowing, similar to xfer_buf
- use in file upload
- use in c-hyper body sending
- h1-proxy, remove init of data->state.uilbuf that is never used
- smb, add own send_buf instead of using data->state.ulbuf
Closes#13010
- replace `Curl_read()`, `Curl_write()` and `Curl_nwrite()` to
clarify when and at what level they operate
- send/recv of transfer related data is now done via
`Curl_xfer_send()/Curl_xfer_recv()` which no longer has
socket/socketindex as parameter. It decides on the transfer
setup of `conn->sockfd` and `conn->writesockfd` on which
connection filter chain to operate.
- send/recv on a specific connection filter chain is done via
`Curl_conn_send()/Curl_conn_recv()` which get the socket index
as parameter.
- rename `Curl_setup_transfer()` to `Curl_xfer_setup()` for
naming consistency
- clarify that the special CURLE_AGAIN hangling to return
`CURLE_OK` with length 0 only applies to `Curl_xfer_send()`
and CURLE_AGAIN is returned by all other send() variants.
- fix a bug in websocket `curl_ws_recv()` that mixed up data
when it arrived in more than a single chunk (to be made
into a sperate PR, also)
Added as documented [in
CLIENT-READER.md](5b1f31dfba/docs/CLIENT-READERS.md).
- old `Curl_buffer_send()` completely replaced by new `Curl_req_send()`
- old `Curl_fillreadbuffer()` replaced with `Curl_client_read()`
- HTTP chunked uploads are now formatted in a client reader added when
needed.
- FTP line-end conversions are done in a client reader added when
needed.
- when sending requests headers, remaining buffer space is filled with
body data for sending in "one go". This is independent of the request
body size. Resolves#12938 as now small and large requests have the
same code path.
Changes done to test cases:
- test513: now fails before sending request headers as this initial
"client read" triggers the setup fault. Behaves now the same as in
hyper build
- test547, test555, test1620: fix the length check in the lib code to
only fail for reads *smaller* than expected. This was a bug in the
test code that never triggered in the old implementation.
Closes#12969
- replace `Curl_read()`, `Curl_write()` and `Curl_nwrite()` to
clarify when and at what level they operate
- send/recv of transfer related data is now done via
`Curl_xfer_send()/Curl_xfer_recv()` which no longer has
socket/socketindex as parameter. It decides on the transfer
setup of `conn->sockfd` and `conn->writesockfd` on which
connection filter chain to operate.
- send/recv on a specific connection filter chain is done via
`Curl_conn_send()/Curl_conn_recv()` which get the socket index
as parameter.
- rename `Curl_setup_transfer()` to `Curl_xfer_setup()` for
naming consistency
- clarify that the special CURLE_AGAIN hangling to return
`CURLE_OK` with length 0 only applies to `Curl_xfer_send()`
and CURLE_AGAIN is returned by all other send() variants.
- fix a bug in websocket `curl_ws_recv()` that mixed up data
when it arrived in more than a single chunk
The method for sending not just raw bytes, but bytes that are either
"headers" or "body". The send abstraction stack, to to bottom, now is:
* `Curl_req_send()`: has parameter to indicate amount of header bytes,
buffers all data.
* `Curl_xfer_send()`: knows on which socket index to send, returns
amount of bytes sent.
* `Curl_conn_send()`: called with socket index, returns amount of bytes
sent.
In addition there is `Curl_req_flush()` for writing out all buffered
bytes.
`Curl_req_send()` is active for requests without body,
`Curl_buffer_send()` still being used for others. This is because the
special quirks need to be addressed in future parts:
* `expect-100` handling
* `Curl_fillreadbuffer()` needs to add directly to the new
`data->req.sendbuf`
* special body handlings, like `chunked` encodings and line end
conversions will be moved into something like a Client Reader.
In functions of the pattern `CURLcode xxx_send(..., ssize_t *written)`,
replace the `ssize_t` with a `size_t`. It makes no sense to allow for negative
values as the returned `CURLcode` already specifies error conditions. This
allows easier handling of lengths without casting.
Closes#12964
Curl_read/Curl_write clarifications
- replace `Curl_read()`, `Curl_write()` and `Curl_nwrite()` to 1clarify
when and at what level they operate
- send/recv of transfer related data is now done via
`Curl_xfer_send()/Curl_xfer_recv()` which no longer has
socket/socketindex as parameter. It decides on the transfer setup of
`conn->sockfd` and `conn->writesockfd` on which connection filter
chain to operate.
- send/recv on a specific connection filter chain is done via
`Curl_conn_send()/Curl_conn_recv()` which get the socket index as
parameter.
- rename `Curl_setup_transfer()` to `Curl_xfer_setup()` for naming
consistency
- clarify that the special CURLE_AGAIN handling to return `CURLE_OK`
with length 0 only applies to `Curl_xfer_send()` and CURLE_AGAIN is
returned by all other send() variants.
SingleRequest reshuffling
- move functions into request.[ch]
- differentiate between reset and free
- add Curl_req_done() to perform last actions
- add a send `bufq` to SingleRequest for future use in keeping upload data
Closes#12963
This clarifies the handling of server responses by folding the code for
the complicated protocols into their protocol handlers. This concerns
mainly HTTP and its bastard sibling RTSP.
The terms "read" and "write" are often used without clear context if
they refer to the connect or the client/application side of a
transfer. This PR uses "read/write" for operations on the client side
and "send/receive" for the connection, e.g. server side. If this is
considered useful, we can revisit renaming of further methods in another
PR.
Curl's protocol handler `readwrite()` method been changed:
```diff
- CURLcode (*readwrite)(struct Curl_easy *data, struct connectdata *conn,
- const char *buf, size_t blen,
- size_t *pconsumed, bool *readmore);
+ CURLcode (*write_resp)(struct Curl_easy *data, const char *buf, size_t blen,
+ bool is_eos, bool *done);
```
The name was changed to clarify that this writes reponse data to the
client side. The parameter changes are:
* `conn` removed as it always operates on `data->conn`
* `pconsumed` removed as the method needs to handle all data on success
* `readmore` removed as no longer necessary
* `is_eos` as indicator that this is the last call for the transfer
response (end-of-stream).
* `done` TRUE on return iff the transfer response is to be treated as
finished
This change affects many files only because of updated comments in
handlers that provide no implementation. The real change is that the
HTTP protocol handlers now provide an implementation.
The HTTP protocol handlers `write_resp()` implementation will get passed
**all** raw data of a server response for the transfer. The HTTP/1.x
formatted status and headers, as well as the undecoded response
body. `Curl_http_write_resp_hds()` is used internally to parse the
response headers and pass them on. This method is public as the RTSP
protocol handler also uses it.
HTTP/1.1 "chunked" transport encoding is now part of the general
*content encoding* writer stack, just like other encodings. A new flag
`CLIENTWRITE_EOS` was added for the last client write. This allows
writers to verify that they are in a valid end state. The chunked
decoder will check if it indeed has seen the last chunk.
The general response handling in `transfer.c:466` happens in function
`readwrite_data()`. This mainly operates now like:
```
static CURLcode readwrite_data(data, ...)
{
do {
Curl_xfer_recv_resp(data, buf)
...
Curl_xfer_write_resp(data, buf)
...
} while(interested);
...
}
```
All the response data handling is implemented in
`Curl_xfer_write_resp()`. It calls the protocol handler's `write_resp()`
implementation if available, or does the default behaviour.
All raw response data needs to pass through this function. Which also
means that anyone in possession of such data may call
`Curl_xfer_write_resp()`.
Closes#12480
Windows compilers define `_WIN32` automatically. Windows SDK headers
or build env defines `WIN32`, or we have to take care of it. The
agreement seems to be that `_WIN32` is the preferred practice here.
Make the source code rely on that to detect we're building for Windows.
Public `curl.h` was using `WIN32`, `__WIN32__` and `CURL_WIN32` for
Windows detection, next to the official `_WIN32`. After this patch it
only uses `_WIN32` for this. Also, make it stop defining `CURL_WIN32`.
There is a slight chance these break compatibility with Windows
compilers that fail to define `_WIN32`. I'm not aware of any obsolete
or modern compiler affected, but in case there is one, one possible
solution is to define this macro manually.
grepping for `WIN32` remains useful to discover Windows-specific code.
Also:
- extend `checksrc` to ensure we're not using `WIN32` anymore.
- apply minor formatting here and there.
- delete unnecessary checks for `!MSDOS` when `_WIN32` is present.
Co-authored-by: Jay Satiro
Reviewed-by: Daniel Stenberg
Closes#12376
This PR has these changes:
Renaming of unencode_* to cwriter, e.g. client writers
- documentation of sendf.h functions
- move max decode stack checks back to content_encoding.c
- define writer phase which was used as order before
- introduce phases for monitoring inbetween decode phases
- offering default implementations for init/write/close
Add type paramter to client writer's do_write()
- always pass all writes through the writer stack
- writers who only care about BODY data will pass other writes unchanged
add RAW and PROTOCOL client writers
- RAW used for Curl_debug() logging of CURLINFO_DATA_IN
- PROTOCOL used for updates to data->req.bytecount, max_filesize checks and
Curl_pgrsSetDownloadCounter()
- remove all updates of data->req.bytecount and calls to
Curl_pgrsSetDownloadCounter() and Curl_debug() from other code
- adjust test457 expected output to no longer see the excess write
Closes#12184
Previously it would only stop them from getting started if the size is
known to be too big then.
Update the libcurl and curl docs accordingly.
Fixes#11810
Reported-by: Elliot Killick
Assisted-by: Jay Satiro
Closes#11820
- refs #11342 where errors with git https interactions
were observed
- problem was caused by 1st sends of size larger than 64KB
which resulted in later retries of 64KB only
- limit sending of 1st block to 64KB
- adjust h2/h3 filters to cope with parsing the HTTP/1.1
formatted request in chunks
- introducing Curl_nwrite() as companion to Curl_write()
for the many cases where the sockindex is already known
Fixes#11342 (again)
Closes#11803
Aka "jumbo" or "amalgamation" builds. It means to compile all sources
per target as a single C source. This is experimental.
You can enable it by passing `-DCMAKE_UNITY_BUILD=ON` to cmake.
It requires CMake 3.16 or newer.
It makes builds (much) faster, allows for better optimizations and tends
to promote less ambiguous code.
Also add a new AppVeyor CI job and convert an existing one to use
"unity" mode (one MSVC, one MinGW), and enable it for one macOS CI job.
Fix related issues:
- add missing include guard to `easy_lock.h`.
- rename static variables and functions (and a macro) with names reused
across sources, or shadowed by local variables.
- add an `#undef` after use.
- add a missing `#undef` before use.
- move internal definitions from `ftp.h` to `ftp.c`.
- `curl_memory.h` fixes to make it work when included repeatedly.
- stop building/linking curlx bits twice for a static-mode curl tool.
These caused doubly defined symbols in unity builds.
- silence missing extern declarations compiler warning for ` _CRT_glob`.
- fix extern declarations for `tool_freq` and `tool_isVistaOrGreater`.
- fix colliding static symbols in debug mode: `debugtime()` and
`statename`.
- rename `ssl_backend_data` structure to unique names for each
TLS-backend, along with the `ssl_connect_data` struct member
referencing them. This required adding casts for each access.
- add workaround for missing `[P]UNICODE_STRING` types in certain Windows
builds when compiling `lib/ldap.c`. To support "unity" builds, we had
to enable `SCHANNEL_USE_BLACKLISTS` for Schannel (a Windows
`schannel.h` option) _globally_. This caused an indirect inclusion of
Windows `schannel.h` from `ldap.c` via `winldap.h` to have it enabled
as well. This requires `[P]UNICODE_STRING` types, which is apperantly
not defined automatically (as seen with both MSVS and mingw-w64).
This patch includes `<subauth.h>` to fix it.
Ref: https://github.com/curl/curl/runs/13987772013
Ref: https://dev.azure.com/daniel0244/curl/_build/results?buildId=15827&view=logs&jobId=2c9f582d-e278-56b6-4354-f38a4d851906&j=2c9f582d-e278-56b6-4354-f38a4d851906&t=90509b00-34fa-5a81-35d7-5ed9569d331c
- tweak unity builds to compile `lib/memdebug.c` separately in memory
trace builds to avoid PP confusion.
- force-disable unity for test programs.
- do not compile and link libcurl sources to libtests _twice_ when libcurl
is built in static mode.
KNOWN ISSUES:
- running tests with unity builds may fail in cases.
- some build configurations/env may not compile in unity mode. E.g.:
https://ci.appveyor.com/project/curlorg/curl/builds/47230972/job/51wfesgnfuauwl8q#L250
Ref: https://github.com/libssh2/libssh2/issues/1034
Ref: https://cmake.org/cmake/help/latest/prop_tgt/UNITY_BUILD.html
Ref: https://en.wikipedia.org/wiki/Unity_buildCloses#11095
By making sure we set state.upload based on the set.method value and not
independently as set.upload, we reduce confusion and mixup risks, both
internally and externally.
Closes#11017
The protocol needs to know the size ahead of time, this is now a known
restriction and not a bug.
Also output a clearer error if the URL path does not contain proper
share.
Ref: #7896Closes#10484
- they are mostly pointless in all major jurisdictions
- many big corporations and projects already don't use them
- saves us from pointless churn
- git keeps history for us
- the year range is kept in COPYING
checksrc is updated to allow non-year using copyright statements
Closes#10205
- almost all backend calls pass the Curl_cfilter intance instead of
connectdata+sockindex
- ssl_connect_data is remove from struct connectdata and made internal
to vtls
- ssl_connect_data is allocated in the added filter, kept at cf->ctx
- added function to let a ssl filter access its ssl_primary_config and
ssl_config_data this selects the propert subfields in conn and data,
for filters added as plain or proxy
- adjusted all backends to use the changed api
- adjusted all backends to access config data via the exposed
functions, no longer using conn or data directly
cfilter renames for clear purpose:
- methods `Curl_conn_*(data, conn, sockindex)` work on the complete
filter chain at `sockindex` and connection `conn`.
- methods `Curl_cf_*(cf, ...)` work on a specific Curl_cfilter
instance.
- methods `Curl_conn_cf()` work on/with filter instances at a
connection.
- rebased and resolved some naming conflicts
- hostname validation (und session lookup) on SECONDARY use the same
name as on FIRST (again).
new debug macros and removing connectdata from function signatures where not
needed.
adapting schannel for new Curl_read_plain paramter.
Closes#9919
- general construct/destroy in connectdata
- default implementations of callback functions
- connect: cfilters for connect and accept
- socks: cfilter for socks proxying
- http_proxy: cfilter for http proxy tunneling
- vtls: cfilters for primary and proxy ssl
- change in general handling of data/conn
- Curl_cfilter_setup() sets up filter chain based on data settings,
if none are installed by the protocol handler setup
- Curl_cfilter_connect() boot straps filters into `connected` status,
used by handlers and multi to reach further stages
- Curl_cfilter_is_connected() to check if a conn is connected,
e.g. all filters have done their work
- Curl_cfilter_get_select_socks() gets the sockets and READ/WRITE
indicators for multi select to work
- Curl_cfilter_data_pending() asks filters if the have incoming
data pending for recv
- Curl_cfilter_recv()/Curl_cfilter_send are the general callbacks
installed in conn->recv/conn->send for io handling
- Curl_cfilter_attach_data()/Curl_cfilter_detach_data() inform filters
and addition/removal of a `data` from their connection
- adding vtl functions to prevent use of Curl_ssl globals directly
in other parts of the code.
Reviewed-by: Daniel Stenberg
Closes#9855
This patch aims to cleanup the use of `process.h` header and the macro
`HAVE_PROCESS_H` associated with it.
- `process.h` is always available on Windows. In curl, it is required
only for `_beginthreadex()` in `lib/curl_threads.c`.
- `process.h` is also available in MS-DOS. In curl, its only use was in
`lib/smb.c` for `getpid()`. But `getpid()` is in fact declared by
`unistd.h`, which is always enabled via `lib/config-dos.h`. So the
header is not necessary.
- `HAVE_PROCESS_H` was detected by CMake, forced to 1 on Windows and
left to real detection for other platforms.
It was also set to always-on in `lib/config-win32.h` and
`lib/config-dos.h`.
In autotools builds, there was no detection and the macro was never
set.
Based on these observations, in this patch we:
- Rework Windows `getpid` logic in `lib/smb.c` to always use the
equivalent direct Win32 API function `GetCurrentProcessId()`, as we
already did for Windows UWP apps. This makes `process.h` unnecessary
here on Windows.
- Stop #including `process.h` into files where it was not necessary.
This is everywhere, except `lib/curl_threads.c`.
> Strangely enough, `lib/curl_threads.c` compiled fine with autotools
> because `process.h` is also indirecty included via `unistd.h`. This
> might have been broken in autotools MSVC builds, where the latter
> header is missing.
- Delete all remaining `HAVE_PROCESS_H` feature guards, for they were
unnecessary.
- Delete `HAVE_PROCESS_H` detection from CMake and predefined values
from `lib/config-*.h` headers.
Reviewed-by: Jay Satiro
Closes#9703
PR #9255 aimed to fix a Cygwin/MSYS issue (#8220). It used the
`CURL_WIN32` macro, but that one is not defined here, while compiling
curl itself. This patch changes this to `WIN32`, assuming this was the
original intent.
Regression from 1c52e8a379
Reviewed-by: Marcel Raad
Closes#9701
Add licensing and copyright information for all files in this repository. This
either happens in the file itself as a comment header or in the file
`.reuse/dep5`.
This commit also adds a Github workflow to check pull requests and adapts
copyright.pl to the changes.
Closes#8869
- the data needs to be "line-based" anyway since it's also passed to the
debug callback/application
- it makes infof() work like failf() and consistency is good
- there's an assert that triggers on newlines in the format string
- Also removes a few instances of "..."
- Removes the code that would append "..." to the end of the data *iff*
it was truncated in infof()
Closes#7357
Introducing a 'isproxy' argument to the connect function so that it
knows wether to store the time stamp or not.
Reported-by: Yongkang Huang
Fixes#7274Closes#7274
The libssh2 backend has SSH session associated with the connection but
the callback context is the easy handle, so when a connection gets
attached to a transfer, the protocol handler now allows for a custom
function to get used to set things up correctly.
Reported-by: Michael O'Farrell
Fixes#6898Closes#7078
Previously this logic would cap the send to CURL_MAX_WRITE_SIZE bytes,
but for the situations where a larger upload buffer has been set, this
function can benefit from sending more bytes. With default size used,
this does the same as before.
Also changed the storage of the size to an 'unsigned int' as it is not
allowed to be set larger than 2M.
Also added cautions to the man pages about changing buffer sizes in
run-time.
Closes#7022
... in most cases instead of 'struct connectdata *' but in some cases in
addition to.
- We mostly operate on transfers and not connections.
- We need the transfer handle to log, store data and more. Everything in
libcurl is driven by a transfer (the CURL * in the public API).
- This work clarifies and separates the transfers from the connections
better.
- We should avoid "conn->data". Since individual connections can be used
by many transfers when multiplexing, making sure that conn->data
points to the current and correct transfer at all times is difficult
and has been notoriously error-prone over the years. The goal is to
ultimately remove the conn->data pointer for this reason.
Closes#6425
`USE_WINDOWS_SSPI` without `USE_WIN32_CRYPTO` but with any other DES
backend is fine, but was excluded before.
This also fixes test 1013 as the condition for SMB support in
configure.ac didn't match the condition in the source code. Now it
does.
Fixes https://github.com/curl/curl/issues/1262
Closes https://github.com/curl/curl/pull/5771
