When scanning for which LDAP libraries to use, try the -lldap -llber
combination before the reversed order since it has a greater chance of
working when linking with libcurl statically.
Fixes#1619Closes#1634
Reported-by: David E. Narváez
Some versions of test allow == for equality, but others (such as the HP-UX
version) do not. Use a single = for correctness.
Error output:
checking for monotonic clock_gettime... ./configure[20445]: ==: A test command parameter is not valid.
In addition to -miphoneos-version-min, the same version can be set
using -mios-version-min. And for WatchOS and TvOS, there's
-mwatchos-version-min and -mtvos-version-min.
The FreeBSD Port security/ca_root_nss installs the Mozilla NSS CA bundle
to /usr/local/share/certs/ca-root-nss.crt. Use this bundle in the
discovery process.
This change also removes the former FreeBSD path that has been obsolete
for 8 years since this FreeBSD ports commit:
https://svnweb.freebsd.org/ports/head/security/?view=revision&revision=215953Closes#894
These configure vars are modified in a curl-specific way but never
evaluated or loaded from cache, even though they are designated as
_cv_. We could either implement proper AC_CACHE_CHECKs for them, or
remove them completely.
Fixes#603 as ac_cv_func_gethostbyname is no longer clobbered, and
AC_CHECK_FUNC(gethostbyname...) will no longer spuriously succeed after
the first configure run with caching.
`ac_cv_func_strcasecmp` is curious, see #770.
`eval "ac_cv_func_$func=yes"` can still cause problems as it works in
tandem with AC_CHECK_FUNCS and then potentially modifies its result. It
would be best to rewrite this test to use a new CURL_CHECK_FUNCS macro,
which works the same as AC_CHECK_FUNCS but relies on caching the values
of curl_cv_func_* variables, without modifiying ac_cv_func_*.
These configure vars are modified in a curl-specific way and modified by
the configure process, but are never loaded from cache, even though they
are designated as _cv_. We should implement proper AC_CACHE_CHECKs for
them eventually.
This variable must not be cached in its current form, as any cached
information will prevent the next configure run from determining the
correct LIBS needed for the function. Thus, rename prefix `ac_cv_` to
just `curl_`.
Since gcc 5, the processor output can get split up on multiple lines
that made the configure script fail to figure out values from
definitions. The fix is to use cpp -P, and this fix now first checks if
cpp -P is necessary and then if cpp -P works before it uses that to
extract defined values.
Fixes#719
- Warn if --with-ca-bundle file does not exist.
- Warn if --with-ca-path directory does not contain certificates.
- Improve help messages for both.
Example configure output:
ca cert bundle: /some/file (warning: certs not found)
ca cert path: /some/dir (warning: certs not found)
Bug: https://github.com/curl/curl/issues/404
Reported-by: Jeffrey Walton
When trying to verify a peer without having any root CA certificates
set, this makes libcurl use the TLS library's built in default as
fallback.
Closes#569
- Allow the user to use PKG_CONFIG but not PKGCONFIG.
Background:
Last week in 14d5a86 a change was made to allow the user to set the
PKGCONFIG variable. Today in 72d99f2 I supplemented that to allow the
more common PKG_CONFIG as an alternative if PKGCONFIG is not set.
Neither of those changes worked as expected because PKGCONFIG is
occasionally reset in configure and by the CURL_CHECK_PKGCONFIG macro.
Instead in this commit I take the approach that the user may set
PKG_CONFIG only.
- If mingw ssl make sure -lgdi32 comes after ssl libs
- Allow PKG_CONFIG to set pkg-config location and options
Bug: https://github.com/bagder/curl/pull/501
Reported-by: Kang Lin
This option disables any attempts in configure to create dependency on
stuff requiring linking to librt.so and libpthread.so, in this case this
means clock_gettime(CLOCK_MONOTONIC, &mt).
We were in need to build curl which doesn't link libpthread.so to avoid
the following bug:
https://sourceware.org/bugzilla/show_bug.cgi?id=16628.
The missing file has not been autogenerated because a temporary fix was
employed in acinclude.m4 which blocked update. Removed that fix and a recent
version of missing is copied to build root.
SSL_CTX_load_verify_locations by default (and if given non-Null
parameters) searches the CAfile first and falls back to CApath. This
allows for CAfile to be a basis (e.g. installed by the package manager)
and CApath to be a user configured directory.
This wasn't reflected by the previous configure constraint which this
patch fixes.
Bug: https://github.com/bagder/curl/pull/139
The commit 7b074a460b to CURL_CHECK_CA_BUNDLE in 7.31 (don't check
for paths when cross-compiling) causes --without-ca-path to no longer
works when cross-compiling, since ca and capath only ever get set to
"no" when not cross-compiling, I attach a patch that works for me. Also
in the cross-compilation case, no ca-path seems to be a better default
(IMVHO) than empty ca-path.
Bug: http://curl.haxx.se/bug/view.cgi?id=1273
Patch-by: Stefan Neis
1 - We don't use the results from the test and we never did. recvfrom()
is only used by the TFTP code and it has not caused any problems.
2 - the CURL_CHECK_FUNC_RECVFROM function is extremely slow
When cross-compiling, CURL_CHECK_PKGCONFIG was checking for the cross
pkg-config using ${host}-pkg-config.
The gold standard for doing this correctly is pkg-config's own macro,
PKG_PROG_PKG_CONFIG. However, on the assumption that you have a good
reason not to use that directly (reduced dependencies for maintainer
builds?), the behaviour of cURL's version should at least match.
PKG_PROG_PKG_CONFIG uses AC_PATH_TOOL, which ultimately ends up trying
${host_alias}-pkg-config; this is not quite the same as what cURL does,
and may differ because ${host} has been run through config.sub. For
instance, when cross-building to the armhf architecture on Ubuntu,
${host_alias} is arm-linux-gnueabihf while ${host} is
arm-unknown-linux-gnueabihf. This may also have been the cause of the
problem reported at http://curl.haxx.se/mail/lib-2012-04/0224.html.
AC_PATH_TOOL is significantly simpler than cURL's current code, and
dates back to well before the current minimum of Autoconf 2.57, so let's
use it instead.
AIX sys/poll.h header file defines 'events' and 'revents' as C
preprocessor macros. Usage of these literals in libcurl's external
API was introduced in commit de24d7bd4c causing AIX build failures.
Appropriate inclusion of sys/poll.h by libcurl's external interface
fixes AIX build and usage issues while avoiding a SONAME bump.
When using Sun C compiler the preprocessor somehow inserts an extra space
in front of replaced symbol, breaking CURL_CHECK_DEF macro. To workaround
this, macro CURL_CHECK_DEF now ignores all leading whitespace in front of
symbol substitution result.
recvfrom in bionic (the android libc) deviates from POSIX and uses a
const in the 5th argument ("const struct sockaddr *") so the check now
tests for that as well.
When curl calls a function from that library then it needs to
explicitly link to the library instead of piggybacking on
libcurl's own dependency. Without this, GNU ld with the
--no-add-needed flag fails when linking (which Fedora now does
by default).
Reported by: Quanah Gibson-Mount
Bug: http://curl.haxx.se/mail/lib-2010-09/0085.html
being properly detected under certain circumstances. It had been caused by
strange behavior of pkg-config when handling PKG_CONFIG_LIBDIR. pkg-config
distinguishes among empty and non-existent environment variable in that case.
when cross-compiling. The key to success is then you properly setup
PKG_CONFIG_PATH before invoking configure.
I also improved how NSS is detected by trying nss-config if pkg-config isn't
present, and as a last resort just use the lib name and force the user to
setup the LIBS/LDFLAGS/CFLAGS etc properly. The previous last resort would
add a range of various libs that would almost never be quite correct.
by Daniel Black, I've now added magic to the configure script that makes it
use pkg-config to detect gnutls details as well if the existing method
(using libgnutls-config) fails. While doing this, I cleaned up and unified
the pkg-config usage when detecting openssl and nss as well.
option to specify dis(activation) of picky compiler warnings.
If option is specified, it will be honored independant of the
--(dis|en)able-debug option.
If option is not specified, it will follow --(dis|en)able-debug
setting, whose default is disabled if not specified.
supporting configure's --disable-largefile option for WIN32 targets also.
Non-configure systems which do not use config-win32.h configuration file,
and want to use the WIN32 file API, must define USE_WIN32_LARGE_FILES or
USE_WIN32_SMALL_FILES as appropriate in their own configuration files.
the names of the curl_off_t formatting string directives now become
CURL_FORMAT_CURL_OFF_T and CURL_FORMAT_CURL_OFF_TU.
CURL_FMT_OFF_T -> CURL_FORMAT_CURL_OFF_T
CURL_FMT_OFF_TU -> CURL_FORMAT_CURL_OFF_TU
Remove the use of an internal name for the curl_off_t formatting string directives
and use the common one available from the inside and outside of the library.
FORMAT_OFF_T -> CURL_FORMAT_CURL_OFF_T
FORMAT_OFF_TU -> CURL_FORMAT_CURL_OFF_TU
