Next Protocol Negotiation is a TLS extension that was created and used
for agreeing to use the SPDY protocol (the precursor to HTTP/2) for
HTTPS. In the early days of HTTP/2, before the spec was finalized and
shipped, the protocol could be enabled using this extension with some
servers.
curl supports the NPN extension with some TLS backends since then, with
a command line option `--npn` and in libcurl with
`CURLOPT_SSL_ENABLE_NPN`.
HTTP/2 proper is made to use the ALPN (Application-Layer Protocol
Negotiation) extension and the NPN extension has no purposes
anymore. The HTTP/2 spec was published in May 2015.
Today, use of NPN in the wild should be extremely rare and most likely
totally extinct. Chrome removed NPN support in Chrome 51, shipped in
June 2016. Removed in Firefox 53, April 2017.
Closes#9307
Lintian (on Debian) has been complaining about this for a while but
I didn't bother initially as the groff parser that we use is not
affected by this.
But I have now noticed that the online manpage is affected by it:
https://curl.se/libcurl/c/CURLOPT_WILDCARDMATCH.html
(I'm using double quotes for quoting-only down below)
The section that should be parsed as "'\'" ends up being parsed as
"'´".
This is due to roffit not parsing "'\\'" correctly, which is fine
as the "correct" way of writing "'\'" is "'\e'" instead.
Note that this fix is not enough to fix the online manpage at
curl's website, as roffit seems to parse it wrongly either way.
My intent is to at least fix the manpage so that roffit can
be changed to parse "'\e'" correctly (although I suggest making
roffit parse both ways correctly, since that's what groff does).
More details at:
https://bugs.debian.org/966803930b18e4b2/tags/a/acute-accent-in-manual-page.tagCloses#9418
- Support TLS 1.3 as the default max TLS version for Windows Server 2022
and Windows 11.
- Support specifying TLS 1.3 ciphers via existing option
CURLOPT_TLS13_CIPHERS (tool: --tls13-ciphers).
Closes https://github.com/curl/curl/pull/8419
Starting now, CURLOPT_FTP_RESPONSE_TIMEOUT is the alias instead of the
other way around.
Since 7.20.0, CURLOPT_SERVER_RESPONSE_TIMEOUT has existed as an alias
but since the option is for more protocols than FTP the more "correct"
version of the option is the "server" one so now we switch.
Closes#9104
... as replacements for deprecated CURLOPT_PROTOCOLS and
CURLOPT_REDIR_PROTOCOLS as these new ones do not risk running into the
32 bit limit the old ones are facing.
CURLINFO_PROTCOOL is now deprecated.
The curl tool is updated to use the new options.
Added test 1597 to verify the libcurl protocol parser.
Closes#8992
During the packaging of the latest curl release for Debian, Lintian
warned me about a typo which causes the section name "Secrets in memory"
to not be rendered in the manpage due to "SH_" not being recognized as a
header.
Closes#9057
.. and update some docs to explain curl_global_* is now thread-safe.
Follow-up to 23af112 which made curl_global_init/cleanup thread-safe.
Closes https://github.com/curl/curl/pull/9016
- Remove misleading text that says progress function "gets called at
least once per second, even if the connection is paused."
The progress function behavior is more nuanced and the user is better
served reading the progress function doc rather than attempt to explain
it in the curl_easy_pause doc.
The progress function can only be called at least once per second if an
appropriate multi transfer function is called (eg curl_multi_perform) in
that time. For a paused transfer there may not be such a call. Rather
than explain this in detail in the curl_easy_pause doc, rely on the user
reading the CURLOPT_PROGRESSFUNCTION doc.
Ref: https://github.com/curl/curl/issues/8983
Closes https://github.com/curl/curl/pull/9015
Referring to Daniel's article [1], making the init function thread-safe
was the last bit to make libcurl thread-safe as a whole. So the name of
the feature may as well be the more concise 'threadsafe', also telling
the story that libcurl is now fully thread-safe, not just its init
function. Chances are high that libcurl wants to remain so in the
future, so there is little likelihood of ever needing any other distinct
`threadsafe-<name>` feature flags.
For consistency we also shorten `CURL_VERSION_THREADSAFE_INIT` to
`CURL_VERSION_THREADSAFE`, update its description and reference libcurl's
thread safety documentation.
[1]: https://daniel.haxx.se/blog/2022/06/08/making-libcurl-init-more-thread-safe/
Reviewed-by: Daniel Stenberg
Reviewed-by: Jay Satiro
Closes#8989
Add licensing and copyright information for all files in this repository. This
either happens in the file itself as a comment header or in the file
`.reuse/dep5`.
This commit also adds a Github workflow to check pull requests and adapts
copyright.pl to the changes.
Closes#8869
Adds two new error codes: CURLE_UNRECOVERABLE_POLL and
CURLM_UNRECOVERABLE_POLL one each for the easy and the multi interfaces.
Reported-by: Harry Sintonen
Fixes#8921Closes#8961
The e-mail link in the advice contains instructions that are prone to
error. We need an example that works and can demonstrate how to properly
perform a ranged upload, and then we can refer to that example instead.
Bug: https://github.com/curl/curl/issues/8969
Reported-by: Simon Berger
Closes https://github.com/curl/curl/pull/8970
This flag can be used to make sure that curl_global_init() is
thread-safe.
This can be useful for libraries that can't control what other
dependencies are doing with Curl.
Closes#8680
The callback set by CURLOPT_SSH_HOSTKEYFUNCTION is called to check
wether or not the connection should continue.
The host key is passed in argument with a custom handle for the
application.
It overrides CURLOPT_SSH_KNOWNHOSTS
Closes#7959
Folded header lines will now get passed through like before. The headers
API is adapted and will provide the content unfolded.
Added test 1274 and extended test 1940 to verify.
Reported-by: Petr Pisar
Fixes#8844Closes#8899
Usage:
curl -x "socks5h://localhost/run/tor/socks" "https://example.com"
Updated runtests.pl to run a socksd server listening on unix socket
Added tests test1467 test1468
Added documentation for proxy command line option and socks proxy
options
Closes#8668
These two options were only ever used for the OpenSSL backend for
versions before 1.1.0. They were never used for other backends and they
are not used with recent OpenSSL versions. They were never used much by
applications.
The defines RANDOM_FILE and EGD_SOCKET can still be set at build-time
for ancient EOL OpenSSL versions.
Closes#8670
The API documentation for the MIME functions specify that the parts
can be set twice, with the last call winning. While true, the user
can set the parts n times for n > 2, reword to specify multiple API
calls instead.
Closes: #8860
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Multiple share examples were missing a semicolon on the line defining
the CURLSHcode variable.
Closes: #8697
Reported-by: Michael Kaufmann <mail@michael-kaufmann.ch>
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Mostly based on recent language decisions from "everything curl":
- remove contractions (isn't => is not)
- *an* HTTP (consistency)
- runtime (no hyphen)
- backend (no hyphen)
- URL is uppercase
Closes#8646
Several years ago a change was made to block user callbacks from calling
back into the API when not supported (recursive calls). One of the calls
blocked was curl_multi_assign. Recently the blocking was extended to the
multi interface API, however curl_multi_assign may need to be called
from within those user callbacks (eg CURLMOPT_SOCKETFUNCTION).
I can't think of any callback where it would be unsafe to call
curl_multi_assign so I removed the restriction entirely.
Reported-by: Michael Wallner
Ref: https://github.com/curl/curl/commit/b46cfbc
Ref: https://github.com/curl/curl/commit/340bb19
Fixes https://github.com/curl/curl/issues/8480
Closes https://github.com/curl/curl/pull/8483
1. The callback is better described in the option for setting it. Having
it in a single place reduces the risk that one of them is wrong.
2. The "typical usage" is wrong since the functions described in this
man page are both deprecated so they cannot be used in any "typical" way
anymore.
Closes#8262
As credentials can be quite different depending on the mechanism used,
there are no default mechanisms for LDAP and simple bind with a DN is
then used.
The caller has to provide mechanism(s) using CURLOPT_LOGIN_OPTIONS to
enable SASL authentication and disable simple bind.
Closes#8152
83cc966 changed documentation from using http to https. However,
CURLOPT_RESOLVE being set to port 80 in the documentation means that it
isn't valid for the new URL. Update to 443.
Closes https://github.com/curl/curl/pull/8258
Mesalink has ceased development. We can no longer encourage use of it.
It seems to be continued under the name TabbySSL, but no attempts have
(yet) been to make curl support it.
Fixes#8188Closes#8191
For consistency, use the same return code for URL malformats,
independently of what scheme that is used. Previously this would return
CURLE_LDAP_INVALID_URL, but starting now that error cannot be returned.
Closes#8170
Add support for `CURLOPT_CAINFO_BLOB` `CURLOPT_PROXY_CAINFO_BLOB` to the
rustls TLS backend. Multiple certificates in a single PEM string are
supported just like OpenSSL does with this option.
This is compatible at least with rustls-ffi 0.8+ which is our new
minimum version anyway.
I was able to build and run this on Windows, pulling trusted certs from
the system and then add them to rustls by setting
`CURLOPT_CAINFO_BLOB`. Handy!
Closes#8255
