By default the API inhibits empty queries and fragments extracted.
Unless this new flag is set.
This also makes the behavior more consistent: without it set, zero
length queries and fragments are considered not present in the URL. With
the flag set, they are returned as a zero length strings if they were in
fact present in the URL.
This applies when extracting the individual query and fragment
components and for the full URL.
Closes#13396
Returns the time, in microseconds, during which this transfer was held
in a waiting queue before it started "for real". A transfer might be put
in a queue if after getting started, it cannot create a new connection
etc due to set conditions and limits imposed by the application.
Ref: #12293Closes#12368
A new error code to be used when an internal field grows too large, like
when a dynbuf reaches its maximum. Previously it would return
CURLE_OUT_OF_MEMORY for this, which is highly misleading.
Ref: #12268Closes#12269
Windows compilers define `_WIN32` automatically. Windows SDK headers
or build env defines `WIN32`, or we have to take care of it. The
agreement seems to be that `_WIN32` is the preferred practice here.
Make the source code rely on that to detect we're building for Windows.
Public `curl.h` was using `WIN32`, `__WIN32__` and `CURL_WIN32` for
Windows detection, next to the official `_WIN32`. After this patch it
only uses `_WIN32` for this. Also, make it stop defining `CURL_WIN32`.
There is a slight chance these break compatibility with Windows
compilers that fail to define `_WIN32`. I'm not aware of any obsolete
or modern compiler affected, but in case there is one, one possible
solution is to define this macro manually.
grepping for `WIN32` remains useful to discover Windows-specific code.
Also:
- extend `checksrc` to ensure we're not using `WIN32` anymore.
- apply minor formatting here and there.
- delete unnecessary checks for `!MSDOS` when `_WIN32` is present.
Co-authored-by: Jay Satiro
Reviewed-by: Daniel Stenberg
Closes#12376
- add an `id` long to Curl_easy, -1 on init
- once added to a multi (or its own multi), it gets
a non-negative number assigned by the connection cache
- `id` is unique among all transfers using the same
cache until reaching LONG_MAX where it will wrap
around. So, not unique eternally.
- CURLINFO_CONN_ID returns the connection id attached to
data or, if none present, data->state.lastconnect_id
- variables and type declared in tool for write out
Closes#11185
* Configure changes to detect AWS-LC
* CMakeLists.txt changes to detect AWS-LC
* Compile-time branches needed to support AWS-LC
* Correctly set OSSL_VERSION and report AWS-LC release number
* GitHub Actions script to build with autoconf and cmake against AWS-LC
AWS-LC is a BoringSSL/OpenSSL derivative
For more information see https://github.com/awslabs/aws-lc/Closes#10320
Add a deprecated attribute to functions and enum values that should not
be used anymore.
This uses a gcc 4.3 dialect, thus is only available for this version of
gcc and newer. Note that the _Pragma() keyword is introduced by C99, but
is available as part of the gcc dialect even when compiling in C89 mode.
It is still possible to disable deprecation at a calling module compile
time by defining CURL_DISABLE_DEPRECATION.
Gcc type checking macros are made aware of possible deprecations.
Some testing support Perl programs are adapted to the extended
declaration syntax.
Several test and unit test C programs intentionally use deprecated
functions/options and are annotated to not generate a warning.
New test 1222 checks the deprecation status in doc and header files.
Closes#9667
Field feature_names contains a null-terminated sorted array of feature
names. Bitmask field features is deprecated.
Documentation is updated. Test 1177 and tests/version-scan.pl updated to
match new documentation format and extended to check feature names too.
Closes#9583
Prior to this change if the user wanted to signal an error from their
write callbacks they would have to use logic to return a value different
from the number of bytes (nmemb) passed to the callback. Also, the
inclination of some users has been to just return 0 to signal error,
which is incorrect as that may be the number of bytes passed to the
callback.
To remedy this the user can now return CURL_WRITEFUNC_ERROR instead.
Ref: https://github.com/curl/curl/issues/9873
Closes https://github.com/curl/curl/pull/9874
Adds a new option to control the maximum time that a cached
certificate store may be retained for.
Currently only the OpenSSL backend implements support for
caching certificate stores.
Closes#9620
curl_ws_recv() now receives data to fill up the provided buffer, but can
return a partial fragment. The function now also get a pointer to a
curl_ws_frame struct with metadata that also mentions the offset and
total size of the fragment (of which you might be receiving a smaller
piece). This way, large incoming fragments will be "streamed" to the
application. When the curl_ws_frame struct field 'bytesleft' is 0, the
final fragment piece has been delivered.
curl_ws_recv() was also adjusted to work with a buffer size smaller than
the fragment size. (Possibly needless to say as the fragment size can
now be 63 bit large).
curl_ws_send() now supports sending a piece of a fragment, in a
streaming manner, in addition to sending the entire fragment in a single
call if it is small enough. To send a huge fragment, curl_ws_send() can
be used to send it in many small calls by first telling libcurl about
the total expected fragment size, and then send the payload in N number
of separate invokes and libcurl will stream those over the wire.
The struct curl_ws_meta() returns is now called 'curl_ws_frame' and it
has been extended with two new fields: *offset* and *bytesleft*. To help
describe the passed on data chunk when a fragment is delivered in many
smaller pieces.
The documentation has been updated accordingly.
Closes#9636
Next Protocol Negotiation is a TLS extension that was created and used
for agreeing to use the SPDY protocol (the precursor to HTTP/2) for
HTTPS. In the early days of HTTP/2, before the spec was finalized and
shipped, the protocol could be enabled using this extension with some
servers.
curl supports the NPN extension with some TLS backends since then, with
a command line option `--npn` and in libcurl with
`CURLOPT_SSL_ENABLE_NPN`.
HTTP/2 proper is made to use the ALPN (Application-Layer Protocol
Negotiation) extension and the NPN extension has no purposes
anymore. The HTTP/2 spec was published in May 2015.
Today, use of NPN in the wild should be extremely rare and most likely
totally extinct. Chrome removed NPN support in Chrome 51, shipped in
June 2016. Removed in Firefox 53, April 2017.
Closes#9307
Starting now, CURLOPT_FTP_RESPONSE_TIMEOUT is the alias instead of the
other way around.
Since 7.20.0, CURLOPT_SERVER_RESPONSE_TIMEOUT has existed as an alias
but since the option is for more protocols than FTP the more "correct"
version of the option is the "server" one so now we switch.
Closes#9104
... as replacements for deprecated CURLOPT_PROTOCOLS and
CURLOPT_REDIR_PROTOCOLS as these new ones do not risk running into the
32 bit limit the old ones are facing.
CURLINFO_PROTCOOL is now deprecated.
The curl tool is updated to use the new options.
Added test 1597 to verify the libcurl protocol parser.
Closes#8992
Referring to Daniel's article [1], making the init function thread-safe
was the last bit to make libcurl thread-safe as a whole. So the name of
the feature may as well be the more concise 'threadsafe', also telling
the story that libcurl is now fully thread-safe, not just its init
function. Chances are high that libcurl wants to remain so in the
future, so there is little likelihood of ever needing any other distinct
`threadsafe-<name>` feature flags.
For consistency we also shorten `CURL_VERSION_THREADSAFE_INIT` to
`CURL_VERSION_THREADSAFE`, update its description and reference libcurl's
thread safety documentation.
[1]: https://daniel.haxx.se/blog/2022/06/08/making-libcurl-init-more-thread-safe/
Reviewed-by: Daniel Stenberg
Reviewed-by: Jay Satiro
Closes#8989
Adds two new error codes: CURLE_UNRECOVERABLE_POLL and
CURLM_UNRECOVERABLE_POLL one each for the easy and the multi interfaces.
Reported-by: Harry Sintonen
Fixes#8921Closes#8961
This flag can be used to make sure that curl_global_init() is
thread-safe.
This can be useful for libraries that can't control what other
dependencies are doing with Curl.
Closes#8680
The callback set by CURLOPT_SSH_HOSTKEYFUNCTION is called to check
wether or not the connection should continue.
The host key is passed in argument with a custom handle for the
application.
It overrides CURLOPT_SSH_KNOWNHOSTS
Closes#7959
For consistency, use the same return code for URL malformats,
independently of what scheme that is used. Previously this would return
CURLE_LDAP_INVALID_URL, but starting now that error cannot be returned.
Closes#8170
The callbacks were partially documented to support this. Now the
behavior is documented and returning error from either of these
callbacks will effectively kill all currently ongoing transfers.
Added test 530 to verify
Reported-by: Marcelo Juchem
Fixes#8083Closes#8089
Previously, the return code CURLUE_MALFORMED_INPUT was used for almost
30 different URL format violations. This made it hard for users to
understand why a particular URL was not acceptable. Since the API cannot
point out a specific position within the URL for the problem, this now
instead introduces a number of additional and more fine-grained error
codes to allow the API to return more exactly in what "part" or section
of the URL a problem was detected.
Also bug-fixes curl_url_get() with CURLUPART_ZONEID, which previously
returned CURLUE_OK even if no zoneid existed.
Test cases in 1560 have been adjusted and extended. Tests 1538 and 1559
have been updated.
Updated libcurl-errors.3 and curl_url_strerror() accordingly.
Closes#8049
Until now, form field and file names where escaped using the
backslash-escaping algorithm defined for multipart mails. This commit
replaces this with the percent-escaping method for URLs.
As this may introduce incompatibilities with server-side applications, a
new libcurl option CURLOPT_MIME_OPTIONS with bitmask
CURLMIMEOPT_FORMESCAPE is introduced to revert to legacy use of
backslash-escaping. This is controlled by new cli tool option
--form-escape.
New tests and documentation are provided for this feature.
Reported by: Ryan Sleevi
Fixes#7789Closes#7805
Triggered before a request is made but after a connection is set up
Changes:
- callback: Update docs and callback for pre-request callback
- Add documentation for CURLOPT_PREREQDATA and CURLOPT_PREREQFUNCTION,
- Add redirect test and callback failure test
- Note that the function may be called multiple times on a redirection
- Disable new 2086 test due to Windows weirdness
Closes#7477
... and also change the 'Removed' column name to 'Last' since that
column is for the last version to contain the symbol.
Closes https://github.com/curl/curl/pull/7609
