The URL extracted with CURLINFO_EFFECTIVE_URL was returned as given as
input in most cases, which made it not get a scheme prefixed like before
if the URL was given without one, and it didn't remove dotdot sequences
etc.
Added test case 1907 to verify that this now works as intended and as
before 7.62.0.
Regression introduced in 7.62.0
Reported-by: Christophe Dervieux
Fixes#4491Closes#4493
To make sure that the HTTP/2 state is initialized correctly for
duplicated handles. It would otherwise easily generate "spurious"
PRIORITY frames to get sent over HTTP/2 connections when duplicated easy
handles were used.
Reported-by: Daniel Silverstone
Fixes#4303Closes#4442
Prior to this change non-ssl/non-ssh connections that were reused set
TIMER_APPCONNECT [1]. Arguably that was incorrect since no SSL/SSH
handshake took place.
[1]: TIMER_APPCONNECT is publicly known as CURLINFO_APPCONNECT_TIME in
libcurl and %{time_appconnect} in the curl tool. It is documented as
"the time until the SSL/SSH handshake is completed".
Reported-by: Marcel Hernandez
Ref: https://github.com/curl/curl/issues/3760
Closes https://github.com/curl/curl/pull/3773
If you set the same URL for target as for DoH (and it isn't a DoH
server), like "https://example.com" in both, the easy handles used for
the DoH requests could be left "dangling" and end up not getting freed.
Reported-by: Paul Dreik
Closes#4366
So that users can mask in/out specific HTTP versions when Alt-Svc is
used.
- Removed "h2c" and updated test case accordingly
- Changed how the altsvc struct is laid out
- Added ifdefs to make the unittest run even in a quiche-tree
Closes#4201
RFC 7838 section 5:
When using an alternative service, clients SHOULD include an Alt-Used
header field in all requests.
Removed CURLALTSVC_ALTUSED again (feature is still EXPERIMENTAL thus
this is deemed ok).
You can disable sending this header just like you disable any other HTTP
header in libcurl.
Closes#4199
Added the ability for the calling program to specify the authorisation
identity (authzid), the identity to act as, in addition to the
authentication identity (authcid) and password when using SASL PLAIN
authentication.
Fixes#3653Closes#3790
NOTE: This commit was cherry-picked and is part of a series of commits
that added the authzid feature for upcoming 7.66.0. The series was
temporarily reverted in db8ec1f so that it would not ship in a 7.65.x
patch release.
Closes https://github.com/curl/curl/pull/4186
As the plan has been laid out in DEPRECATED. Update docs accordingly and
verify in test 1174. Now requires the option to be set to allow HTTP/0.9
responses.
Closes#4191
It was used (intended) to pass in the size of the 'socks' array that is
also passed to these functions, but was rarely actually checked/used and
the array is defined to a fixed size of MAX_SOCKSPEREASYHANDLE entries
that should be used instead.
Closes#4169
USe configure --with-ngtcp2 or --with-quiche
Using either option will enable a HTTP3 build.
Co-authored-by: Alessandro Ghedini <alessandro@ghedini.me>
Closes#3500
All protocols except for CURLPROTO_FILE/CURLPROTO_SMB and their TLS
counterpart were allowed for redirect. This vastly broadens the
exploitation surface in case of a vulnerability such as SSRF [1], where
libcurl-based clients are forced to make requests to arbitrary hosts.
For instance, CURLPROTO_GOPHER can be used to smuggle any TCP-based
protocol by URL-encoding a payload in the URI. Gopher will open a TCP
connection and send the payload.
Only HTTP/HTTPS and FTP are allowed. All other protocols have to be
explicitly enabled for redirects through CURLOPT_REDIR_PROTOCOLS.
[1]: https://www.acunetix.com/blog/articles/server-side-request-forgery-vulnerability/
Signed-off-by: Linos Giannopoulos <lgian@skroutz.gr>
Closes#4094
Old connections are meant to expire from the connection cache after
CURLOPT_MAXAGE_CONN seconds. However, they actually expire after 1000x
that value. This occurs because a time value measured in milliseconds is
accidentally divided by 1M instead of by 1,000.
Closes https://github.com/curl/curl/pull/4013
Since more than one socket can be used by each transfer at a given time,
each sockhash entry how has its own hash table with transfers using that
socket.
In addition, the sockhash entry can now be marked 'blocked = TRUE'"
which then makes the delete function just set 'removed = TRUE' instead
of removing it "for real", as a way to not rip out the carpet under the
feet of a parent function that iterates over the transfers of that same
sockhash entry.
Reported-by: Tom van der Woerdt
Fixes#3961Fixes#3986Fixes#3995Fixes#4004Closes#3997
This fixes the static dependency on iphlpapi.lib and allows curl to
build for targets prior to Windows Vista.
This partially reverts 170bd047.
Fixes#3960Closes#3958
... so that it has a sensible value when ConnectionExists() is called which
needs it set to differentiate host "bundles" correctly on port number!
Also, make conncache:hashkey() use correct port for bundles that are proxy vs
host connections.
Probably a regression from 7.62.0
Reported-by: Tom van der Woerdt
Fixes#3956Closes#3957
Only HTTP proxy use where multiple host names can be used over the same
connection should use the proxy host name for bundles.
Reported-by: Tom van der Woerdt
Fixes#3951Closes#3955
- Revert all commits related to the SASL authzid feature since the next
release will be a patch release, 7.65.1.
Prior to this change CURLOPT_SASL_AUTHZID / --sasl-authzid was destined
for the next release, assuming it would be a feature release 7.66.0.
However instead the next release will be a patch release, 7.65.1 and
will not contain any new features.
After the patch release after the reverted commits can be restored by
using cherry-pick:
git cherry-pick a14d72ca9499ff8c1cc36c2a8d520edf690
Details for all reverted commits:
Revert "os400: take care of CURLOPT_SASL_AUTHZID in curl_easy_setopt_ccsid()."
This reverts commit 0edf6907ae.
Revert "tests: Fix the line endings for the SASL alt-auth tests"
This reverts commit c2a8d52a13.
Revert "examples: Added SASL PLAIN authorisation identity (authzid) examples"
This reverts commit 8c1cc369d0.
Revert "curl: --sasl-authzid added to support CURLOPT_SASL_AUTHZID from the tool"
This reverts commit a9499ff136.
Revert "sasl: Implement SASL authorisation identity via CURLOPT_SASL_AUTHZID"
This reverts commit a14d72ca2f.
Added the ability for the calling program to specify the authorisation
identity (authzid), the identity to act as, in addition to the
authentication identity (authcid) and password when using SASL PLAIN
authentication.
Fixed#3653Closes#3790
If the proxy string is given as an IPv6 numerical address with a zone
id, make sure to use that for the connect to the proxy.
Reported-by: Edmond Yu
Fixes#3482Closes#3918
Given that Curl_disconnect() calls Curl_http_auth_cleanup_ntlm() prior
to calling conn_shutdown() and it in turn performs this, there is no
need to perform the same action in conn_shutdown().
Closes#3881
- make sure an already "owned" connection isn't returned unless
multiplexed.
- clear ->data when returning the connection to the cache again
Regression since 7.62.0 (probably in commit 1b76c38904)
Bug: https://curl.haxx.se/mail/lib-2019-03/0064.htmlCloses#3686
* Adjusted unit tests 2056, 2057
* do not generally close connections with CURLAUTH_NEGOTIATE after every request
* moved negotiatedata from UrlState to connectdata
* Added stream rewind logic for CURLAUTH_NEGOTIATE
* introduced negotiatedata::GSS_AUTHDONE and negotiatedata::GSS_AUTHSUCC
* Consider authproblem state for CURLAUTH_NEGOTIATE
* Consider reuse_forbid for CURLAUTH_NEGOTIATE
* moved and adjusted negotiate authentication state handling from
output_auth_headers into Curl_output_negotiate
* Curl_output_negotiate: ensure auth done is always set
* Curl_output_negotiate: Set auth done also if result code is
GSS_S_CONTINUE_NEEDED/SEC_I_CONTINUE_NEEDED as this result code may
also indicate the last challenge request (only works with disabled
Expect: 100-continue and CURLOPT_KEEP_SENDING_ON_ERROR -> 1)
* Consider "Persistent-Auth" header, detect if not present;
Reset/Cleanup negotiate after authentication if no persistent
authentication
* apply changes introduced with #2546 for negotiate rewind logic
Fixes#1261Closes#1975
- no need to have them protocol specific
- no need to set pointers to them with the Curl_setup_transfer() call
- make Curl_setup_transfer() operate on a transfer pointer, not
connection
- switch some counters from long to the more proper curl_off_t type
Closes#3627
- Split off connection shutdown procedure from Curl_disconnect into new
function conn_shutdown.
- Change the shutdown procedure to close the sockets before
disassociating the transfer.
Prior to this change the sockets were closed after disassociating the
transfer so SOCKETFUNCTION wasn't called since the transfer was already
disassociated. That likely came about from recent work started in
Jan 2019 (#3442) to separate transfers from connections.
Bug: https://curl.haxx.se/mail/lib-2019-02/0101.html
Reported-by: Pavel Löbl
Closes https://github.com/curl/curl/issues/3597
Closes https://github.com/curl/curl/pull/3598
- Save the original conn->data before it's changed to the specified
data transfer for the connection check and then restore it afterwards.
This is a follow-up to 38d8e1b 2019-02-11.
History:
It was discovered a month ago that before checking whether to extract a
dead connection that that connection should be associated with a "live"
transfer for the check (ie original conn->data ignored and set to the
passed in data). A fix was landed in 54b201b which did that and also
cleared conn->data after the check. The original conn->data was not
restored, so presumably it was thought that a valid conn->data was no
longer needed.
Several days later it was discovered that a valid conn->data was needed
after the check and follow-up fix was landed in bbae24c which partially
reverted the original fix and attempted to limit the scope of when
conn->data was changed to only when pruning dead connections. In that
case conn->data was not cleared and the original conn->data not
restored.
A month later it was discovered that the original fix was somewhat
correct; a "live" transfer is needed for the check in all cases
because original conn->data could be null which could cause a bad deref
at arbitrary points in the check. A fix was landed in 38d8e1b which
expanded the scope to all cases. conn->data was not cleared and the
original conn->data not restored.
A day later it was discovered that not restoring the original conn->data
may lead to busy loops in applications that use the event interface, and
given this observation it's a pretty safe assumption that there is some
code path that still needs the original conn->data. This commit is the
follow-up fix for that, it restores the original conn->data after the
connection check.
Assisted-by: tholin@users.noreply.github.com
Reported-by: tholin@users.noreply.github.com
Fixes https://github.com/curl/curl/issues/3542Closes#3559
The http2 code for connection checking needs a transfer to use. Make
sure a working one is set before handler->connection_check() is called.
Reported-by: jnbr on github
Fixes#3541Closes#3547
urlapi: turn three local-only functions into statics
conncache: make conncache_find_first_connection static
multi: make detach_connnection static
connect: make getaddressinfo static
curl_ntlm_core: make hmac_md5 static
http2: make two functions static
http: make http_setup_conn static
connect: make tcpnodelay static
tests: make UNITTEST a thing to mark functions with, so they can be static for
normal builds and non-static for unit test builds
... and mark Curl_shuffle_addr accordingly.
url: make up_free static
setopt: make vsetopt static
curl_endian: make write32_le static
rtsp: make rtsp_connisdead static
warnless: remove unused functions
memdebug: remove one unused function, made another static
Stick to "Schannel" everywhere. The configure option --with-winssl is
kept to allow existing builds to work but --with-schannel is added as an
alias.
Closes#3504
extract_if_dead() dead is called from two functions, and only one of
them should get conn->data updated and now neither call path clears it.
scan-build found a case where conn->data would be NULL dereferenced in
ConnectionExists() otherwise.
Closes#3473
Make sure that this function sets a proper "live" transfer for the
connection before calling the protocol-specific connection check
function, and then clear it again afterward as a non-used connection has
no current transfer.
Reported-by: Jeroen Ooms
Reviewed-by: Marcel Raad
Reviewed-by: Daniel Gustafsson
Fixes#3463Closes#3464
We use "conn" everywhere to be a pointer to the connection.
Introduces two functions that "attaches" and "detaches" the connection
to and from the transfer.
Going forward, we should favour using "data->conn" (since a transfer
always only has a single connection or none at all) to "conn->data"
(since a connection can have none, one or many transfers associated with
it and updating conn->data to be correct is error prone and a frequent
reason for internal issues).
Closes#3442
Do not assume/store assocation between a given easy handle and the
connection if it can be avoided.
Long-term, the 'conn->data' pointer should probably be removed as it is a
little too error-prone. Still used very widely though.
Reported-by: masbug on github
Fixes#3391Closes#3400
Added CURLOPT_HTTP09_ALLOWED and --http0.9 for this purpose.
For now, both the tool and library allow HTTP/0.9 by default.
docs/DEPRECATE.md lays out the plan for when to reverse that default: 6
months after the 7.64.0 release. The options are added already now so
that applications/scripts can start using them already now.
Fixes#2873Closes#3383
The function does not return the same value as snprintf() normally does,
so readers may be mislead into thinking the code works differently than
it actually does. A different function name makes this easier to detect.
Reported-by: Tomas Hoger
Assisted-by: Daniel Gustafsson
Fixes#3296Closes#3297
When using c-ares for asyn dns, the dns socket fd was silently closed
by c-ares without curl being aware. curl would then 'realize' the fd
has been removed at next call of Curl_resolver_getsock, and only then
notify the CURLMOPT_SOCKETFUNCTION to remove fd from its poll set with
CURL_POLL_REMOVE. At this point the fd is already closed.
By using ares socket state callback (ARES_OPT_SOCK_STATE_CB), this
patch allows curl to be notified that the fd is not longer needed
for neither for write nor read. At this point by calling
Curl_multi_closed we are able to notify multi with CURL_POLL_REMOVE
before the fd is actually closed by ares.
In asyn-ares.c Curl_resolver_duphandle we can't use ares_dup anymore
since it does not allow passing a different sock_state_cb_data
Closes#3238
The function identifying a leading "scheme" part of the URL considered a
few letters ending with a colon to be a scheme, making something like
"short:80" to become an unknown scheme instead of a short host name and
a port number.
Extended test 1560 to verify.
Also fixed test203 to use file_pwd to make it get the correct path on
windows. Removed test 2070 since it was a duplicate of 203.
Assisted-by: Marcel Raad
Reported-by: Hagai Auro
Fixes#3220Fixes#3233Closes#3223Closes#3235
- for "--netrc", don't ignore the login/password specified with "--user",
only ignore the login/password in the URL.
This restores the netrc behaviour of curl 7.61.1 and earlier.
- fix the documentation of CURL_NETRC_REQUIRED
- improve the detection of login/password changes when reading .netrc
- don't read .netrc if both login and password are already set
Fixes#3213Closes#3224
Now FILE transfers send headers to the header callback like HTTP and
other protocols. Also made curl_easy_getinfo(...CURLINFO_PROTOCOL...)
work for FILE in the callbacks.
Makes "curl -i file://.." and "curl -I file://.." work like before
again. Applied the bold header logic to them too.
Regression from c1c2762 (7.61.0)
Reported-by: Shaun Jackman
Fixes#3083Closes#3101
Add functionality so that protocols can do custom keepalive on their
connections, when an external API function is called.
Add docs for the new options in 7.62.0
Closes#1641
