New cfilter HTTP-CONNECT for h3/h2/http1.1 eyeballing.
- filter is installed when `--http3` in the tool is used (or
the equivalent CURLOPT_ done in the library)
- starts a QUIC/HTTP/3 connect right away. Should that not
succeed after 100ms (subject to change), a parallel attempt
is started for HTTP/2 and HTTP/1.1 via TCP
- both attempts are subject to IPv6/IPv4 eyeballing, same
as happens for other connections
- tie timeout to the ip-version HAPPY_EYEBALLS_TIMEOUT
- use a `soft` timeout at half the value. When the soft timeout
expires, the HTTPS-CONNECT filter checks if the QUIC filter
has received any data from the server. If not, it will start
the HTTP/2 attempt.
HTTP/3(ngtcp2) improvements.
- setting call_data in all cfilter calls similar to http/2 and vtls filters
for use in callback where no stream data is available.
- returning CURLE_PARTIAL_FILE for prematurely terminated transfers
- enabling pytest test_05 for h3
- shifting functionality to "connect" UDP sockets from ngtcp2
implementation into the udp socket cfilter. Because unconnected
UDP sockets are weird. For example they error when adding to a
pollset.
HTTP/3(quiche) improvements.
- fixed upload bug in quiche implementation, now passes 251 and pytest
- error codes on stream RESET
- improved debug logs
- handling of DRAIN during connect
- limiting pending event queue
HTTP/2 cfilter improvements.
- use LOG_CF macros for dynamic logging in debug build
- fix CURLcode on RST streams to be CURLE_PARTIAL_FILE
- enable pytest test_05 for h2
- fix upload pytests and improve parallel transfer performance.
GOAWAY handling for ngtcp2/quiche
- during connect, when the remote server refuses to accept new connections
and closes immediately (so the local conn goes into DRAIN phase), the
connection is torn down and a another attempt is made after a short grace
period.
This is the behaviour observed with nghttpx when we tell it to shut
down gracefully. Tested in pytest test_03_02.
TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).
- new tests/tests-httpd/scorecard.py for testing h3/h2 protocol implementation.
Invoke:
python3 tests/tests-httpd/scorecard.py --help
for usage.
Improvements on gathering connect statistics and socket access.
- new CF_CTRL_CONN_REPORT_STATS cfilter control for having cfilters
report connection statistics. This is triggered when the connection
has completely connected.
- new void Curl_pgrsTimeWas(..) method to report a timer update with
a timestamp of when it happend. This allows for updating timers
"later", e.g. a connect statistic after full connectivity has been
reached.
- in case of HTTP eyeballing, the previous changes will update
statistics only from the filter chain that "won" the eyeballing.
- new cfilter query CF_QUERY_SOCKET for retrieving the socket used
by a filter chain.
Added methods Curl_conn_cf_get_socket() and Curl_conn_get_socket()
for convenient use of this query.
- Change VTLS backend to query their sub-filters for the socket when
checks during the handshake are made.
HTTP/3 documentation on how https eyeballing works.
TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).
Scorecard with Caddy.
- configure can be run with `--with-test-caddy=path` to specify which caddy to use for testing
- tests/tests-httpd/scorecard.py now measures download speeds with caddy
pytest improvements
- adding Makfile to clean gen dir
- adding nghttpx rundir creation on start
- checking httpd version 2.4.55 for test_05 cases where it is needed. Skipping with message if too old.
- catch exception when checking for caddy existance on system.
Closes#10349
- they are mostly pointless in all major jurisdictions
- many big corporations and projects already don't use them
- saves us from pointless churn
- git keeps history for us
- the year range is kept in COPYING
checksrc is updated to allow non-year using copyright statements
Closes#10205
As in all other lib tests. This avoids a macro redefinition warning for
`_FILE_OFFSET_BITS` visible in the autobuilds.
Closes https://github.com/curl/curl/pull/10182
Refactoring of connection setup and happy eyeballing. Move
nghttp2. ngtcp2, quiche and msh3 into connection filters.
- eyeballing cfilter that uses sub-filters for performing parallel connects
- socket cfilter for all transport types, including QUIC
- QUIC implementations in cfilter, can now participate in eyeballing
- connection setup is more dynamic in order to adapt to what filter did
really connect. Relevant to see if a SSL filter needs to be added or
if SSL has already been provided
- HTTP/3 test cases similar to HTTP/2
- multiuse of parallel transfers for HTTP/3, tested for ngtcp2 and quiche
- Fix for data attach/detach in VTLS filters that could lead to crashes
during parallel transfers.
- Eliminating setup() methods in cfilters, no longer needed.
- Improving Curl_conn_is_alive() to replace Curl_connalive() and
integrated ssl alive checks into cfilter.
- Adding CF_CNTRL_CONN_INFO_UPDATE to tell filters to update
connection into and persist it at the easy handle.
- Several more cfilter related cleanups and moves:
- stream_weigth and dependency info is now wrapped in struct
Curl_data_priority
- Curl_data_priority members depend is available in HTTP2|HTTP3
- Curl_data_priority members depend on NGHTTP2 support
- handling init/reset/cleanup of priority part of url.c
- data->state.priority same struct, but shallow copy for compares only
- PROTOPT_STREAM has been removed
- Curl_conn_is_mulitplex() now available to check on capability
- Adding query method to connection filters.
- ngtcp2+quiche: implementing query for max concurrent transfers.
- Adding is_alive and keep_alive cfilter methods. Adding DATA_SETUP event.
- setting keepalive timestamp on connect
- DATA_SETUP is called after the connection has been completely
setup (but may not connected yet) to allow filters to initialize
data members they use.
- there is no socket to be had with msh3, it is unclear how select
shall work
- manual test via "curl --http3 https://curl.se" fail with "empty
reply from server".
- Various socket/conn related cleanups:
- Curl_socket is now Curl_socket_open and in cf-socket.c
- Curl_closesocket is now Curl_socket_close and in cf-socket.c
- Curl_ssl_use has been replaced with Cur_conn_is_ssl
- Curl_conn_tcp_accepted_set has been split into
Curl_conn_tcp_listen_set and Curl_conn_tcp_accepted_set
with a clearer purpose
Closes#10141
1956 adds the sha256 value corresponding to an empty buffer
1957 adds an arbitrary value and confirms that the signature differs from 1956
1958 adds whitespace to 1957 and confirms that the signature matches 1957
1959 adds a value longer than 'char sha_hex[65]' in Curl_output_aws_sigv4()
Signed-off-by: Casey Bodley <cbodley@redhat.com>
Closes#9804
Reproduces #9735 and verifies the subsequent fix. The original issue
uses a pipe that cannot be rewound, but this test case instead sets a
callback without rewind ability to get roughly the same properties but
being a much more portable test.
- Load Windows system libraries secur32 and iphlpapi beforehand, so
that libcurl's repeated global init/cleanup only increases/decreases
the library's refcount rather than causing it to load/unload.
Assisted-by: Marc Hoersken
Closes https://github.com/curl/curl/pull/9412
Add a deprecated attribute to functions and enum values that should not
be used anymore.
This uses a gcc 4.3 dialect, thus is only available for this version of
gcc and newer. Note that the _Pragma() keyword is introduced by C99, but
is available as part of the gcc dialect even when compiling in C89 mode.
It is still possible to disable deprecation at a calling module compile
time by defining CURL_DISABLE_DEPRECATION.
Gcc type checking macros are made aware of possible deprecations.
Some testing support Perl programs are adapted to the extended
declaration syntax.
Several test and unit test C programs intentionally use deprecated
functions/options and are annotated to not generate a warning.
New test 1222 checks the deprecation status in doc and header files.
Closes#9667
- Replace `Github` with `GitHub`.
- Replace `windows` with `Windows`
- Replace `advice` with `advise` where a verb is used.
- A few fixes on removing repeated words.
- Replace `a HTTP` with `an HTTP`
Closes#9802
When CURLU_URLENCODE is set, the parser would mistreat the path
component if the URL was specified without a slash like in
http://local.test:80?-123
Extended test 1560 to reproduce and verify the fix.
Reported-by: Trail of Bits
Closes#9763
Handle canonical headers and signed headers creation as explained here:
https://docs.aws.amazon.com/general/latest/gr/sigv4-create-canonical-request.html
The algo tells that signed and canonical must contain at last host and
x-amz-date.
So we check whatever thoses are present in the curl http headers list.
If they are, we use the one enter by curl user, otherwise we generate
them. then we to lower, and remove space from each http headers plus
host and x-amz-date, then sort them all by alphabetical order.
This patch also fix a bug with host header, which was ignoring the port.
Closes#7966
curl_ws_recv() now receives data to fill up the provided buffer, but can
return a partial fragment. The function now also get a pointer to a
curl_ws_frame struct with metadata that also mentions the offset and
total size of the fragment (of which you might be receiving a smaller
piece). This way, large incoming fragments will be "streamed" to the
application. When the curl_ws_frame struct field 'bytesleft' is 0, the
final fragment piece has been delivered.
curl_ws_recv() was also adjusted to work with a buffer size smaller than
the fragment size. (Possibly needless to say as the fragment size can
now be 63 bit large).
curl_ws_send() now supports sending a piece of a fragment, in a
streaming manner, in addition to sending the entire fragment in a single
call if it is small enough. To send a huge fragment, curl_ws_send() can
be used to send it in many small calls by first telling libcurl about
the total expected fragment size, and then send the payload in N number
of separate invokes and libcurl will stream those over the wire.
The struct curl_ws_meta() returns is now called 'curl_ws_frame' and it
has been extended with two new fields: *offset* and *bytesleft*. To help
describe the passed on data chunk when a fragment is delivered in many
smaller pieces.
The documentation has been updated accordingly.
Closes#9636
In C89, positive integer literals that overflow an int but not an
unsigned int may be understood as a negative int.
lib517.c:129:3: warning: this decimal constant is unsigned only in ISO C90
{"Sun, 06 Nov 2044 08:49:37 GMT", 2362034977 },
^
Closes#9572
This also returns error CURLE_UNSUPPORTED_PROTOCOL rather than
CURLE_BAD_FUNCTION_ARGUMENT when a listed protocol name is not found.
A new schemelen parameter is added to Curl_builtin_scheme() to support
this extended use.
Note that disabled protocols are not recognized anymore.
Tests adapted accordingly.
Closes#9472
- add websockets support to sws
- 2300: first very basic websockets test
- 2301: first libcurl test for ws (not working yet)
- 2302: use the ws callback
- 2303: test refused upgrade
If not, reusing an easy handle to do a subsequent transfer would
continue the counter from the previous invoke, which then would make use
of the header API difficult/impossible as the request counter
mismatched.
Add libtest 1947 to verify.
Reported-by: Andrew Lambert
Fixes#9424Closes#9447
The 550 is overused as a return code for multiple error case, e.g.
file not found and/or insufficient permissions to access the file.
So we cannot fail hard in this case.
Adjust test 511 since we now fail later.
Add new test 3027 which check that when MDTM failed, but the file could
actually be retrieved, that in this case no filetime is provided.
Reported-by: Michael Heimpold
Fixes#9357Closes#9387
This no longer provide functions, only macros. Runs faster and produces
smaller output.
The biggest precaution this change brings:
DO NOT use post/pre-increments when passing arguments to the macros.
Closes#9429
This function no longer returns a negative value if the formatting
string is bad since the return value would sometimes be propagated as a
return code from the mprintf* functions and they are documented to
return the length of the output. Which cannot be negative.
Fixes#9149Closes#9151
Reported-by: yiyuaner on github
... as replacements for deprecated CURLOPT_PROTOCOLS and
CURLOPT_REDIR_PROTOCOLS as these new ones do not risk running into the
32 bit limit the old ones are facing.
CURLINFO_PROTCOOL is now deprecated.
The curl tool is updated to use the new options.
Added test 1597 to verify the libcurl protocol parser.
Closes#8992
As per the documentation :
> Setting a part to a NULL pointer will effectively remove that
> part's contents from the CURLU handle.
But currently clearing CURLUPART_URL does nothing and returns
CURLUE_OK. This change will clear all parts of the URL at once.
Closes#9028
Referring to Daniel's article [1], making the init function thread-safe
was the last bit to make libcurl thread-safe as a whole. So the name of
the feature may as well be the more concise 'threadsafe', also telling
the story that libcurl is now fully thread-safe, not just its init
function. Chances are high that libcurl wants to remain so in the
future, so there is little likelihood of ever needing any other distinct
`threadsafe-<name>` feature flags.
For consistency we also shorten `CURL_VERSION_THREADSAFE_INIT` to
`CURL_VERSION_THREADSAFE`, update its description and reference libcurl's
thread safety documentation.
[1]: https://daniel.haxx.se/blog/2022/06/08/making-libcurl-init-more-thread-safe/
Reviewed-by: Daniel Stenberg
Reviewed-by: Jay Satiro
Closes#8989
Add licensing and copyright information for all files in this repository. This
either happens in the file itself as a comment header or in the file
`.reuse/dep5`.
This commit also adds a Github workflow to check pull requests and adapts
copyright.pl to the changes.
Closes#8869
