- disable HTTPS-proxy as well, since it can't work without HTTP
- curl_setup: when HTTP is disabled, also disable all features that are
HTTP-only
- version: HTTPS-proxy only exists if HTTP support exists
Closes#12223
The goal of this patch is to avoid unnecessary feature detection work
when doing Windows builds with CMake. Do this by pre-filling well-known
detection results for Windows and specifically for mingw-w64 and MSVC
compilers. Also limit feature checks to platforms where the results are
actually used. Drop a few redundant ones. And some tidying up.
- pre-fill remaining detection values in Windows CMake builds.
Based on actual detection results observed in CI runs, preceding
similar work over libssh2 and matching up values with
`lib/config-win32.h`.
This brings down CMake configuration time from 58 to 14 seconds on the
same local machine.
On AppVeyor CI this translates to:
- 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job):
https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186
- 62 seconds -> 16 seconds VS2017 MINGW (per CMake job):
https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194
The formula is about 1-3 seconds delay for each detection. Almost all
of these trigger a full compile-link cycle behind the scenes, slow
even today, both cross and native, mingw-w64 and apparently MSVC too.
Enabling .map files or other custom build features slows it down
further. (Similar is expected for autotools configure.)
- stop detecting `idn2.h` if idn2 was deselected.
autotools does this.
- stop detecting `idn2.h` if idn2 was not found.
This deviates from autotools. Source code requires both header and
lib, so this is still correct, but faster.
- limit `ADDRESS_FAMILY` detection to Windows.
- normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format.
- pre-fill `HAVE_WIN32_WINNT`-dependent detection results.
Saving 4 (slow) feature-detections in most builds: `getaddrinfo`,
`freeaddrinfo`, `inet_ntop`, `inet_pton`
- fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`,
`HAVE_GETTIMEOFDAY` for mingw-w64.
Luckily this do not change build results, as `WIN32` took
priority over `HAVE_GETTIMEOFDAY` with the current source
code.
- limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and
`HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows.
We're not using these in the source code for Windows.
- reduce compiler warning noise in CMake internal logs:
- fix to include `winsock2.h` before `windows.h`.
Apply it to autotools test snippets too.
- delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above.
- cleanup `CMake/CurlTests.c` to emit less warnings.
- delete redundant `HAVE_MACRO_SIGSETJMP` feature check.
It was the same check as `HAVE_SIGSETJMP`.
- delete 'experimental' marking from `CURL_USE_OPENSSL`.
- show CMake version via `CMakeLists.txt`.
Credit to the `zlib-ng` project for the idea:
61e181c8ae/CMakeLists.txt (L7)
- make `CMake/CurlTests.c` pass `checksrc`.
- `CMake/WindowsCache.cmake` tidy-ups.
- replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`.
Closes#12044
... and make the code require both symbol and declaration.
This is because for Android, the symbol is always present in the lib at
build-time even when not actually available in run-time.
Assisted-by: Viktor Szakats
Reported-by: 12932 on github
Fixes#12086Closes#12158
- Add 'threadsafe' to the feature list shown during build if POSIX
threads are being used.
This is a follow-up to 5adb6000 which added support for building a
thread-safe libcurl with older versions of gcc where atomic is not
available but pthread is.
Reported-by: Dan Fandrich
Co-authored-by: Dan Fandrich
Fixes https://github.com/curl/curl/issues/12125
Closes https://github.com/curl/curl/pull/12127
This restores `CURL_CHECK_FUNC_IOCTL` detection. I deleted it in
4d73854462 and
c3456652a0 (2022-08), because the
`HAVE_IOCTL` result it generated was unused in the source. But,
I did miss the fact that this had two dependent checks:
`CURL_CHECK_FUNC_IOCTL_FIONBIO`,
`CURL_CHECK_FUNC_IOCTL_SIOCGIFADDR` that we do actually need:
`HAVE_IOCTL_FIONBIO`, `HAVE_IOCTL_SIOCGIFADDR`.
Regression from 4d73854462
Ref: #11964 (effort to sync cmake detections with autotools)
Closes#12008
fseek uses long offset which does not match with curl_off_t. This leads
to undefined behavior when calling the callback and caused failure on
arm 32 bit.
Use a wrapper to solve this and use fseeko which uses off_t instead of
long.
Thanks to the nice people at Libera IRC #musl for helping finding this
out.
Fixes#11882Fixes#11900Closes#11918
Using the system's provided arpa/tftp.h and optimizing, GCC 12 detects
and reports a stringop-overread warning:
tftpd.c: In function ‘write_behind.isra’:
tftpd.c:485:12: warning: ‘write’ reading between 1 and 2147483647 bytes from a region of size 0 [-Wstringop-overread]
485 | return write(test->ofile, writebuf, count);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from tftpd.c:71:
/usr/include/arpa/tftp.h:58:30: note: source object ‘tu_data’ of size 0
58 | char tu_data[0]; /* data or error string */
| ^~~~~~~
This occurs because writebuf points to this field and the latter
cannot be considered as being of dynamic length because it is not
the last field in the structure. Thus it is bound to its declared
size.
This commit always uses curl's own version of tftp.h where the
target field is last in its structure, effectively avoiding the
warning.
As HAVE_ARPA_TFTP_H is not used anymore, cmake/configure checks for
arpa/tftp.h are removed.
Closes#11897
The syntax was incorrect (need a proper main body), and the test
condition was wrong (resulting in a signed `time_t` detected as
unsigned).
Closes#11825
The library flags retrieved from pkg-config were later thrown out and
harded-coded, which negates the whole reason to use pkg-config.
Also, previously, the assumption was made that --libs-only-l and
--libs-only-L are the full decomposition of --libs, which is untrue and
would not allow linking against a static zlib. The new approach is
better in that it uses --libs, although only if --libs-only-l returns
nothing.
Bug: https://curl.se/mail/lib-2023-08/0081.html
Reported-by: Randall
Closes#11778
- with CMake, use the variable `WINDOWS_STORE` to detect an UWP build
and disable our non-UWP-compatible use the Windows crypto API. This
allows to drop two dynamic feature checks.
`WINDOWS_STORE` is true when invoking CMake with
`CMAKE_SYSTEM_NAME` == `WindowsStore`. Introduced in CMake v3.1.
Ref: https://cmake.org/cmake/help/latest/variable/WINDOWS_STORE.html
- with autotools, drop the separate feature check for `wincrypt.h`. On
one hand this header has been present for long (even Borland C 5.5 had
it from year 2000), on the other we used the check result solely to
enable another check for certain crypto functions. This fails anyway
with the header not present. We save one dynamic feature check at the
configure stage.
Reviewed-by: Marcel Raad
Closes#11657
Introduce a --enable-form-api configure option to control its inclusion
in builds. The condition name defined for it is CURL_DISABLE_FORM_API.
Form api code is dependent of MIME: configure and CMake handle this
dependency automatically: CMake by making it a dependent option
explicitly, configure by inheriting the MIME value by default and
rejecting explicit incompatible values.
"form-api" is now a new hidden test feature.
Update libcurl modules to respect this option and adjust tests
accordingly.
Closes#9621
... as otherwise the configure script will say it is OpenLDAP in the
summary, but not set the USE_OPENLDAP define, therefor not using the
intended OpenLDAP code paths.
Regression since 4d7385446 (7.85.0)
Fixes#11372Closes#11374
Reported-by: vlkl-sap on github
If you try to assign and export on the same line on some older /bin/sh
implementations, it complains:
```
$ export "NAME=value"
NAME=value: is not an identifier
```
This commit rewrites run-compiler's assignments and exports to work with
old /bin/sh, splitting assignment and export into two separate
statements, and only quote the value. So now we have:
```
NAME="value"
export NAME
```
While we're here, make the same change to the two supporting
assign+export lines preceeding the script to be consistent with how
exports work throughout the rest of configure.ac.
Closes#11228
Since ./configure and processes that inherit its environment variables
are the only callers of the run-compiler script, we can just save the
current value of the LD_LIBRARY_PATH and CC variables to another pair of
environment variables, and make run-compiler a static script that
simply restores CC and LD_LIBRARY_PATH to the saved value, and before
running the compiler.
This avoids having to inject the values of the variables in the script,
possibly causing problems if they contains spaces, quotes, and other
special characters.
Also add exports in the script just in case LD_LIBRARY_PATH and CC are
not already in the environment.
follow-up from 471dab2Closes#11182
Building for multilib failed, as the compiler command contains an
extra argument. That needs quoting.
Regression from b78ca50cb3Fixes#11179Closes#11180
AC_ARG_ENABLE seems to only trim off whitespace from the start and end
of its help-string argument, while prepending two spaces of indentation
to all lines.
This means that the two spaces of indentation between the --enable-rtsp
and the --disable-rtsp line were not removed causing ./configure --help
to print:
Optional Features:
[...]
--enable-rtsp Enable RTSP support
--disable-rtsp Disable RTSP support
I removed the indentation to fix the issue, now it prints:
Optional Features:
[...]
--enable-rtsp Enable RTSP support
--disable-rtsp Disable RTSP support
The --enable-hsts and --disable-hsts lines had the same problems, and
have been fixed too.
Closes#11142
in the CURL_RUN_IFELSE macro, with LD_LIBRARY_PATH set to the value of
the configure invoke, and not the value that might be used later,
intended for the execution of the output the compiler ouputs.
For example when the compiler uses the same library (like libz) that
configure checks for.
Reported-by: Jonas Bülow
Fixes#11114Closes#11120
- Makefile support for building test specific clients in tests/http/clients
- auto-make of clients when invoking pytest
- added test_09_02 for server PUSH_PROMISEs using clients/h2-serverpush
- added test_02_21 for lib based downloads and pausing/unpausing transfers
curl url parser:
- added internal method `curl_url_set_authority()` for setting the
authority part of a url (used for PUSH_PROMISE)
http2:
- made logging of PUSH_PROMISE handling nicer
Placing python test requirements in requirements.txt files
- separate files to base test suite and http tests since use
and module lists differ
- using the files in the gh workflows
websocket test cases, fixes for we and bufq
- bufq: account for spare chunks in space calculation
- bufq: reset chunks that are skipped empty
- ws: correctly encode frames with 126 bytes payload
- ws: update frame meta information on first call of collect
callback that fills user buffer
- test client ws-data: some test/reporting improvements
Closes#11006
curl now requires quiche version >= 1.17.1 to be used and this function
was added in this version and makes a convenient check.
This requirement is because this is the lowest quiche version that
supports peer-initiated key updates correctly.
Closes#10886
- make configure show on HTTP3 feature that both ngtcp2 and nghttp3
are in play
- define ENABLE_QUIC only when USE_NGTCP2 and USE_NGHTTP3 are defined
- add USE_NGHTTP3 in the ngtcp2 implementation
Fixes#10793Closes#10821
- added to: ngtcp2-quictls, ngtcp2-gnutls and the linux varians
quiche, bearssl, libressl, mbedtls, openssl3, rustls
- added disabled in ngtcp2-wolfssl due to weird SSL_connect() errors
not reproducable locally
Improvements on pytest:
- handling of systems with nghttpx in $PATH
- configure will seach $PATH got nghttpx used in pytest
- pytest fixes for managing nghttpx without h3 support
- ngtcp2-wolfssl: use a fully enabled wolfssl build
- lower parallel count for http/1.1 tests, since we do not
want to test excessive connections.
- check built curl for HTTPS-proxy support in proxy tests
- bearssl does not like one of our critical cert extensions, making
it non-critical now
- bearssl is too slow for test_12, skipping
- making sure we do h3 tests only when curl and server support is there
Closes#10699
Normally curl uses cryptographically strong random provided by the
selected SSL backend. If compiled without SSL support, a naive built-in
function was used instead.
Generally this was okay, but it will result in some downsides for non-
SSL builds, such as predictable temporary file names.
This change ensures that arc4random will be used instead, if available.
Closes#10672
Because automake used to delete depdirs at once (.deps) and there was an issue
with portability, curl's XC_AMEND_DISTCLEAN greps the Makefiles in an attempt
to build a list of all depfiles and delete them individually instead.
Since commit 08849db866b44510f6b8fd49e313c91a43a3dfd3, automake switched from
deleting directories to individual files. curl's custom logic now finds a lot
more results with the grep (the filtering of these results isn't great), which
causes a massive bloating of the Makefile in the order of O(n^2).
Also remove now-unused XC_AMEND_DISTCLEAN macro group
References: https://github.com/curl/curl/issues/9843
References: https://debbugs.gnu.org/cgi/bugreport.cgi?bug=59288
Reported-by: Ilmari Lauhakangas
Fixes#9843Closes#10661
- httpd is only one server we test with
- the suite coveres the HTTP protocol in general where
the default test cases need a more beefy environment
Closes#10654
New cfilter HTTP-CONNECT for h3/h2/http1.1 eyeballing.
- filter is installed when `--http3` in the tool is used (or
the equivalent CURLOPT_ done in the library)
- starts a QUIC/HTTP/3 connect right away. Should that not
succeed after 100ms (subject to change), a parallel attempt
is started for HTTP/2 and HTTP/1.1 via TCP
- both attempts are subject to IPv6/IPv4 eyeballing, same
as happens for other connections
- tie timeout to the ip-version HAPPY_EYEBALLS_TIMEOUT
- use a `soft` timeout at half the value. When the soft timeout
expires, the HTTPS-CONNECT filter checks if the QUIC filter
has received any data from the server. If not, it will start
the HTTP/2 attempt.
HTTP/3(ngtcp2) improvements.
- setting call_data in all cfilter calls similar to http/2 and vtls filters
for use in callback where no stream data is available.
- returning CURLE_PARTIAL_FILE for prematurely terminated transfers
- enabling pytest test_05 for h3
- shifting functionality to "connect" UDP sockets from ngtcp2
implementation into the udp socket cfilter. Because unconnected
UDP sockets are weird. For example they error when adding to a
pollset.
HTTP/3(quiche) improvements.
- fixed upload bug in quiche implementation, now passes 251 and pytest
- error codes on stream RESET
- improved debug logs
- handling of DRAIN during connect
- limiting pending event queue
HTTP/2 cfilter improvements.
- use LOG_CF macros for dynamic logging in debug build
- fix CURLcode on RST streams to be CURLE_PARTIAL_FILE
- enable pytest test_05 for h2
- fix upload pytests and improve parallel transfer performance.
GOAWAY handling for ngtcp2/quiche
- during connect, when the remote server refuses to accept new connections
and closes immediately (so the local conn goes into DRAIN phase), the
connection is torn down and a another attempt is made after a short grace
period.
This is the behaviour observed with nghttpx when we tell it to shut
down gracefully. Tested in pytest test_03_02.
TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).
- new tests/tests-httpd/scorecard.py for testing h3/h2 protocol implementation.
Invoke:
python3 tests/tests-httpd/scorecard.py --help
for usage.
Improvements on gathering connect statistics and socket access.
- new CF_CTRL_CONN_REPORT_STATS cfilter control for having cfilters
report connection statistics. This is triggered when the connection
has completely connected.
- new void Curl_pgrsTimeWas(..) method to report a timer update with
a timestamp of when it happend. This allows for updating timers
"later", e.g. a connect statistic after full connectivity has been
reached.
- in case of HTTP eyeballing, the previous changes will update
statistics only from the filter chain that "won" the eyeballing.
- new cfilter query CF_QUERY_SOCKET for retrieving the socket used
by a filter chain.
Added methods Curl_conn_cf_get_socket() and Curl_conn_get_socket()
for convenient use of this query.
- Change VTLS backend to query their sub-filters for the socket when
checks during the handshake are made.
HTTP/3 documentation on how https eyeballing works.
TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).
Scorecard with Caddy.
- configure can be run with `--with-test-caddy=path` to specify which caddy to use for testing
- tests/tests-httpd/scorecard.py now measures download speeds with caddy
pytest improvements
- adding Makfile to clean gen dir
- adding nghttpx rundir creation on start
- checking httpd version 2.4.55 for test_05 cases where it is needed. Skipping with message if too old.
- catch exception when checking for caddy existance on system.
Closes#10349
- adding '--with-test-httpd=<path>' to configure non-standard apache2
install
- python env and base classes for running httpd
- basic tests for connectivity with h1/h2/h3
- adding test cases for truncated responses in http versions.
- adding goaway test for HTTP/3.
- adding "stuttering" tests with parallel downloads in chunks with
varying delays between chunks.
- adding a curltest module to the httpd server, adding GOAWAY test.
- mod_curltest now installs 2 handlers
- 'echo': writing as response body what came as request body
- 'tweak': with query parameters to tweak response behaviour
- marked known fails as skip for now
Closes#10175
- they are mostly pointless in all major jurisdictions
- many big corporations and projects already don't use them
- saves us from pointless churn
- git keeps history for us
- the year range is kept in COPYING
checksrc is updated to allow non-year using copyright statements
Closes#10205
- keeping the "current" easy handle registered at SSL* is no longer
necessary, since the "calling" data object is already stored in the
cfilter's context (and used by other SSL backends from there).
- The "detach" of an easy handle that goes out of scope is then avoided.
- using SSL_set0_wbio for clear reference counting where available.
Closes#10151
