Finding a 'Content-Range:' in the response changed the handling.
Add test case 1475 to verify -C - with 416 and Content-Range: header,
which is almost exactly like test 194 which instead uses a fixed -C
offset. Adjusted test 194 to also be considered fine.
Fixes#10521
Reported-by: Smackd0wn
Fixes#12174
Reported-by: Anubhav Rai
Closes#12176
This test would show an error message if the output was missing during
the log post-processing step, but the message was not captured by the
test harness and wasn't useful since the normal golden log file
comparison would the problem more clearly.
- make result print collected write data, unless
change in meta flags is detected
- will show same result even when data arrives via
several writecb invocations
Closes#12068
The test otherwise could do just about anything (except leak memory in
debug mode) and its bad behaviour wouldn't be detected. Now, check the
resulting cookie file to ensure the cookies are still there.
Closes#12041
msys2 builds actually hit the connect timeout in normal operation, so
lower the timeout from 5 minutes to 5 seconds to reduce test time.
Ref: #11328Closes#12036
Use the test macros to automatically propagate some errors, and check
and log others while running the tests. This can help in debugging
exactly why a test has failed.
Seen with llvm 17 on Windows x64.
```
.../curl/tests/server/rtspd.c:136:13: warning: no previous extern declaration for non-static variable 'logdir' [-Wmissing-variable-declarations]
136 | const char *logdir = "log";
| ^
.../curl/tests/server/rtspd.c:136:7: note: declare 'static' if the variable is not intended to be used outside of this translation unit
136 | const char *logdir = "log";
| ^
.../curl/tests/server/rtspd.c:137:6: warning: no previous extern declaration for non-static variable 'loglockfile' [-Wmissing-variable-declarations]
137 | char loglockfile[256];
| ^
.../curl/tests/server/rtspd.c:137:1: note: declare 'static' if the variable is not intended to be used outside of this translation unit
137 | char loglockfile[256];
| ^
.../curl/tests/server/fake_ntlm.c:43:13: warning: no previous extern declaration for non-static variable 'logdir' [-Wmissing-variable-declarations]
43 | const char *logdir = "log";
| ^
.../curl/tests/server/fake_ntlm.c:43:7: note: declare 'static' if the variable is not intended to be used outside of this translation unit
43 | const char *logdir = "log";
| ^
.../curl/src/tool_doswin.c:350:8: warning: possible misuse of comma operator here [-Wcomma]
350 | ++d, ++s;
| ^
.../curl/src/tool_doswin.c:350:5: note: cast expression to void to silence warning
350 | ++d, ++s;
| ^~~
| (void)( )
```
```
.../curl/tests/libtest/lib540.c:146:27: warning: result of comparison 'long' > 2147483647 is always false [-Wtautological-type-limit-compare]
146 | int itimeout = (L > (long)INT_MAX) ? INT_MAX : (int)L;
| ~ ^ ~~~~~~~~~~~~~
1 warning generated.
.../curl/tests/libtest/libntlmconnect.c:195:31: warning: result of comparison 'long' > 2147483647 is always false [-Wtautological-type-limit-compare]
195 | int itimeout = (timeout > (long)INT_MAX) ? INT_MAX : (int)timeout;
| ~~~~~~~ ^ ~~~~~~~~~~~~~
1 warning generated.
.../curl/tests/libtest/lib591.c:117:31: warning: result of comparison 'long' > 2147483647 is always false [-Wtautological-type-limit-compare]
117 | int itimeout = (timeout > (long)INT_MAX) ? INT_MAX : (int)timeout;
| ~~~~~~~ ^ ~~~~~~~~~~~~~
1 warning generated.
.../curl/tests/libtest/lib597.c:99:31: warning: result of comparison 'long' > 2147483647 is always false [-Wtautological-type-limit-compare]
99 | int itimeout = (timeout > (long)INT_MAX) ? INT_MAX : (int)timeout;
| ~~~~~~~ ^ ~~~~~~~~~~~~~
1 warning generated.
```
Seen on macOS Intel:
```
.../curl/tests/server/sws.c:440:64: warning: field precision should have type 'int', but argument has type 'size_t' (aka 'unsigned long') [-Wformat]
msnprintf(logbuf, sizeof(logbuf), "Got request: %s %.*s HTTP/%d.%d",
~~^~
1 warning generated.
```
Closes#11925
These tests had a 5 second timeout compared to 60 seconds for all other
tests. Make these consistent with the others for more reliability on
heavily-loaded machines.
Ref: #11328
- Handle user headers in format 'name:' and 'name;' with no value.
The former is used when the user wants to remove an internal libcurl
header and the latter is used when the user actually wants to send a
no-value header in the format 'name:' (note the semi-colon is converted
by libcurl to a colon).
Prior to this change the AWS header import code did not special case
either of those and the generated AWS SignedHeaders would be incorrect.
Reported-by: apparentorder@users.noreply.github.com
Ref: https://curl.se/docs/manpage.html#-H
Fixes https://github.com/curl/curl/issues/11664
Closes https://github.com/curl/curl/pull/11668
- Use CERT_CONTEXT's pbCertEncoded to determine chain order.
CERT_CONTEXT from SECPKG_ATTR_REMOTE_CERT_CONTEXT contains
end-entity/server certificate in pbCertEncoded. We can use this pointer
to determine the order of certificates when enumerating hCertStore using
CertEnumCertificatesInStore.
This change is to help ensure that the ordering of the certificate chain
requested by the user via CURLINFO_CERTINFO has the same ordering on all
versions of Windows.
Prior to this change Schannel certificate order was reversed in 8986df80
but that was later reverted in f540a39b when it was discovered that
Windows 11 22H2 does the reversal on its own.
Ref: https://github.com/curl/curl/issues/9706
Closes https://github.com/curl/curl/pull/11632
- delete completed TODO from `./CMakeLists.txt`.
- convert a C++ comment to C89 in `./CMake/CurlTests.c`.
- delete duplicate EOLs from EOF.
- add missing EOL at EOF.
- delete whitespace at EOL (except from expected test results).
- convert tabs to spaces.
- convert CRLF EOLs to LF in GHA yaml.
- text casing fixes in `./CMakeLists.txt`.
- fix a codespell typo in `packages/OS400/initscript.sh`.
Closes#11772
OS400 uses BSD 4.3 setsockopt() prototype by default: this does not
define parameter as const, resulting in an error if actual parameter is
const. Remove the const keyword from the actual parameter cast: this
works in all conditions, even if the formal parameter uses it.
Closes#11547
In several test programs. These mistakes are not detected or a problem
as long as memdebug.h is included, as that provides the debug wrappers
for all memory functions in the same style libcurl internals do it,
which makes curl_free and free effectively the same call.
Reported-by: Nicholas Nethercote
Closes#11746
This allows testing Y2038 with system time set to after that, so that
actual Y2038 issues can be exposed, and not masked by expiry errors.
Fixes#11576Closes#11610
When the legacy CURLOPT_HTTPPOST option is used, it gets converted into
the modem mimpost struct at first use. This data is (now) kept for the
entire transfer and not only per single HTTP request. This re-enables
rewind in the beginning of the second request instead of in end of the
first, as brought by 1b39731.
The request struct is per-request data only.
Extend test 650 to verify.
Fixes#11680
Reported-by: yushicheng7788 on github
Closes#11682
This is a bad header fold but since the popular browsers accept this
violation, so does curl now. Unless built with hyper.
Add test 1473 to verify and adjust test 2306.
Reported-by: junsik on github
Fixes#11605Closes#11607
This patch adds the ability to build a static and shared libcurl library
in a single build session. It also adds an option to select which one to
use when building the curl executable.
New build options:
- `BUILD_STATIC_LIBS`. Default: `OFF`.
Enabled automatically if `BUILD_SHARED_LIBS` is `OFF`.
- `BUILD_STATIC_CURL`. Default: `OFF`.
Requires `BUILD_STATIC_LIBS` enabled.
Enabled automatically if building static libcurl only.
- `STATIC_LIB_SUFFIX`. Default: empty.
- `IMPORT_LIB_SUFFIX`. Default: `_imp` if implib filename would collide
with static lib name (typically with MSVC) in Windows builds.
Otherwise empty.
Also:
- Stop setting the `CURL_STATICLIB` macro via `curl_config.h`, and pass
it directly to the compiler. This also allows to delete a condition
from `tests/server/CMakeLists.txt`.
- Complete a TODO by following the logic used in autotools (also for
`LIBCURL_NO_SHARED`), and set `-DCURL_STATICLIB` in `Cflags:` of
`libcurl.pc` for _static-only_ curl builds.
- Convert an existing CI test to build both shared and static libcurl.
Closes#11505
Previously the code would just do that for the path when extracting the
full URL, which made a subsequent curl_url_get() of the path to
(unexpectedly) still return it without the leading path.
Amend lib1560 to verify this. Clarify the curl_url_set() docs about it.
Bug: https://curl.se/mail/lib-2023-06/0015.htmlCloses#11272
Reported-by: Pedro Henrique
Aka "jumbo" or "amalgamation" builds. It means to compile all sources
per target as a single C source. This is experimental.
You can enable it by passing `-DCMAKE_UNITY_BUILD=ON` to cmake.
It requires CMake 3.16 or newer.
It makes builds (much) faster, allows for better optimizations and tends
to promote less ambiguous code.
Also add a new AppVeyor CI job and convert an existing one to use
"unity" mode (one MSVC, one MinGW), and enable it for one macOS CI job.
Fix related issues:
- add missing include guard to `easy_lock.h`.
- rename static variables and functions (and a macro) with names reused
across sources, or shadowed by local variables.
- add an `#undef` after use.
- add a missing `#undef` before use.
- move internal definitions from `ftp.h` to `ftp.c`.
- `curl_memory.h` fixes to make it work when included repeatedly.
- stop building/linking curlx bits twice for a static-mode curl tool.
These caused doubly defined symbols in unity builds.
- silence missing extern declarations compiler warning for ` _CRT_glob`.
- fix extern declarations for `tool_freq` and `tool_isVistaOrGreater`.
- fix colliding static symbols in debug mode: `debugtime()` and
`statename`.
- rename `ssl_backend_data` structure to unique names for each
TLS-backend, along with the `ssl_connect_data` struct member
referencing them. This required adding casts for each access.
- add workaround for missing `[P]UNICODE_STRING` types in certain Windows
builds when compiling `lib/ldap.c`. To support "unity" builds, we had
to enable `SCHANNEL_USE_BLACKLISTS` for Schannel (a Windows
`schannel.h` option) _globally_. This caused an indirect inclusion of
Windows `schannel.h` from `ldap.c` via `winldap.h` to have it enabled
as well. This requires `[P]UNICODE_STRING` types, which is apperantly
not defined automatically (as seen with both MSVS and mingw-w64).
This patch includes `<subauth.h>` to fix it.
Ref: https://github.com/curl/curl/runs/13987772013
Ref: https://dev.azure.com/daniel0244/curl/_build/results?buildId=15827&view=logs&jobId=2c9f582d-e278-56b6-4354-f38a4d851906&j=2c9f582d-e278-56b6-4354-f38a4d851906&t=90509b00-34fa-5a81-35d7-5ed9569d331c
- tweak unity builds to compile `lib/memdebug.c` separately in memory
trace builds to avoid PP confusion.
- force-disable unity for test programs.
- do not compile and link libcurl sources to libtests _twice_ when libcurl
is built in static mode.
KNOWN ISSUES:
- running tests with unity builds may fail in cases.
- some build configurations/env may not compile in unity mode. E.g.:
https://ci.appveyor.com/project/curlorg/curl/builds/47230972/job/51wfesgnfuauwl8q#L250
Ref: https://github.com/libssh2/libssh2/issues/1034
Ref: https://cmake.org/cmake/help/latest/prop_tgt/UNITY_BUILD.html
Ref: https://en.wikipedia.org/wiki/Unity_buildCloses#11095
This reverts commit df6c2f7b54.
(It only keep the test case that checks redirection to an absolute URL
without hostname and CURLU_NO_AUTHORITY).
I originally wanted to make CURLU_ALLOW_SPACE accept spaces in the
hostname only because I thought
curl_url_set(CURLUPART_URL, CURLU_ALLOW_SPACE) was already accepting
them, and they were only not being accepted in the hostname when
curl_url_set(CURLUPART_URL) was used for a redirection.
That is not actually the case, urlapi never accepted hostnames with
spaces, and a hostname with a space in it never makes sense.
I probably misread the output of my original test when I they were
normally accepted when using CURLU_ALLOW_SPACE, and not redirecting.
Some other URL parsers seems to allow space in the host part of the URL,
e.g. both python3's urllib.parse module, and Chromium's javascript URL
object allow spaces (chromium percent escapes the spaces with %20),
(they also both ignore TABs, and other whitespace characters), but those
URLs with spaces in the hostname are useless, neither python3's requests
module nor Chromium's window.location can actually use them.
There is no reason to add support for URLs with spaces in the host,
since it was not a inconsistency bug; let's revert that patch before it
makes it into release. Sorry about that.
I also reverted the extra check for CURLU_NO_AUTHORITY since that does
not seem to be necessary, CURLU_NO_AUTHORITY already worked for
redirects.
Closes#11169
It can only be an IPv4 address if all parts are all digits and no more than
four parts, otherwise it is a host name. Even slightly wrong IPv4 will now be
passed through as a host name.
Regression from 17a15d8846 shipped in 8.1.0
Extended test 1560 accordingly.
Reported-by: Pavel Kalyugin
Fixes#11129Closes#11131
