We use `stdint.h` unconditionally in all places except one. These uses
are imposed by external dependencies / features. nghttp2, quic, wolfSSL
and `HAVE_MACH_ABSOLUTE_TIME` do require this C99 header. It means that
any of these features make curl require a C99 compiler. (In case of
MSVC, this means Visual Studio 2010 or newer.)
This patch changes the single use of `stdint.h` guarded by
`HAVE_STDINT_H` to use `stdint.h` unconditionally. Also stop using
`inttypes.h` as an alternative there. `HAVE_INTTYPES_H` wasn't used
anywhere else, allowing to delete this feature check as well.
Closes#12275
After this patch we assume availability of `getaddrinfo` and
`freeaddrinfo`, first introduced in Windows XP. Meaning curl
now requires building for Windows XP as a minimum.
TODO: assume these also in autotools.
Ref: https://github.com/curl/curl/pull/12221#issuecomment-1783761806Closes#12225
The goal of this patch is to avoid unnecessary feature detection work
when doing Windows builds with CMake. Do this by pre-filling well-known
detection results for Windows and specifically for mingw-w64 and MSVC
compilers. Also limit feature checks to platforms where the results are
actually used. Drop a few redundant ones. And some tidying up.
- pre-fill remaining detection values in Windows CMake builds.
Based on actual detection results observed in CI runs, preceding
similar work over libssh2 and matching up values with
`lib/config-win32.h`.
This brings down CMake configuration time from 58 to 14 seconds on the
same local machine.
On AppVeyor CI this translates to:
- 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job):
https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186
- 62 seconds -> 16 seconds VS2017 MINGW (per CMake job):
https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194
The formula is about 1-3 seconds delay for each detection. Almost all
of these trigger a full compile-link cycle behind the scenes, slow
even today, both cross and native, mingw-w64 and apparently MSVC too.
Enabling .map files or other custom build features slows it down
further. (Similar is expected for autotools configure.)
- stop detecting `idn2.h` if idn2 was deselected.
autotools does this.
- stop detecting `idn2.h` if idn2 was not found.
This deviates from autotools. Source code requires both header and
lib, so this is still correct, but faster.
- limit `ADDRESS_FAMILY` detection to Windows.
- normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format.
- pre-fill `HAVE_WIN32_WINNT`-dependent detection results.
Saving 4 (slow) feature-detections in most builds: `getaddrinfo`,
`freeaddrinfo`, `inet_ntop`, `inet_pton`
- fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`,
`HAVE_GETTIMEOFDAY` for mingw-w64.
Luckily this do not change build results, as `WIN32` took
priority over `HAVE_GETTIMEOFDAY` with the current source
code.
- limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and
`HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows.
We're not using these in the source code for Windows.
- reduce compiler warning noise in CMake internal logs:
- fix to include `winsock2.h` before `windows.h`.
Apply it to autotools test snippets too.
- delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above.
- cleanup `CMake/CurlTests.c` to emit less warnings.
- delete redundant `HAVE_MACRO_SIGSETJMP` feature check.
It was the same check as `HAVE_SIGSETJMP`.
- delete 'experimental' marking from `CURL_USE_OPENSSL`.
- show CMake version via `CMakeLists.txt`.
Credit to the `zlib-ng` project for the idea:
61e181c8ae/CMakeLists.txt (L7)
- make `CMake/CurlTests.c` pass `checksrc`.
- `CMake/WindowsCache.cmake` tidy-ups.
- replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`.
Closes#12044
`basename` is present in mingw-w64, missing from MSVC. Pre-cache
accordingly to make configure faster.
Notice that `basename` has a bug so we later disable it even with
mingw-w64:
781242ffa4/lib/curl_setup.h (L820-L825)Closes#11974
- check for arc4random. To make rand.c use it accordingly.
- check for fcntl
- fix fseek detection
- add SIZEOF_CURL_SOCKET_T
- fix USE_UNIX_SOCKETS
- define HAVE_SNPRINTF to 1
- check for fnmatch
- check for sched_yield
- remove HAVE_GETPPID duplicate from curl_config.h
- add HAVE_SENDMSG
Ref: #11964
Co-authored-by: Viktor Szakats
Closes#11973
- `HAVE_MEMRCHR` for `memrchr`.
- `HAVE_GETIFADDRS` for `getifaddrs`.
This was present in `lib/curl_config.h.cmake` but missed the detection
logic.
To match existing autotools feature checks.
Closes#11954
Delete checks and guards for standard C89 headers and assume these are
available: `stdio.h`, `string.h`, `time.h`, `setjmp.h`, `stdlib.h`,
`stddef.h`, `signal.h`.
Some of these we already used unconditionally, some others we only used
for feature checks.
Follow-up to 9c7165e96a#11918 (for `stdio.h` in CMake)
Closes#11940
Using the system's provided arpa/tftp.h and optimizing, GCC 12 detects
and reports a stringop-overread warning:
tftpd.c: In function ‘write_behind.isra’:
tftpd.c:485:12: warning: ‘write’ reading between 1 and 2147483647 bytes from a region of size 0 [-Wstringop-overread]
485 | return write(test->ofile, writebuf, count);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from tftpd.c:71:
/usr/include/arpa/tftp.h:58:30: note: source object ‘tu_data’ of size 0
58 | char tu_data[0]; /* data or error string */
| ^~~~~~~
This occurs because writebuf points to this field and the latter
cannot be considered as being of dynamic length because it is not
the last field in the structure. Thus it is bound to its declared
size.
This commit always uses curl's own version of tftp.h where the
target field is last in its structure, effectively avoiding the
warning.
As HAVE_ARPA_TFTP_H is not used anymore, cmake/configure checks for
arpa/tftp.h are removed.
Closes#11897
- with CMake, use the variable `WINDOWS_STORE` to detect an UWP build
and disable our non-UWP-compatible use the Windows crypto API. This
allows to drop two dynamic feature checks.
`WINDOWS_STORE` is true when invoking CMake with
`CMAKE_SYSTEM_NAME` == `WindowsStore`. Introduced in CMake v3.1.
Ref: https://cmake.org/cmake/help/latest/variable/WINDOWS_STORE.html
- with autotools, drop the separate feature check for `wincrypt.h`. On
one hand this header has been present for long (even Borland C 5.5 had
it from year 2000), on the other we used the check result solely to
enable another check for certain crypto functions. This fails anyway
with the header not present. We save one dynamic feature check at the
configure stage.
Reviewed-by: Marcel Raad
Closes#11657
- cache more Windows config results for faster initialization.
- delete unused config macros `HAVE_SYS_UTSNAME_H`, `HAVE_SSL_H`.
- delete dead references to `sys/utsname.h`.
Closes#11551
EGD is Entropy Gathering Daemon, a socket-based entropy source supported
by pre-OpenSSL v1.1 versions and now deprecated. curl also deprecated it
a while ago.
Its detection in CMake was broken all along because OpenSSL libs were
not linked at the point of feature check.
Delete detection from both cmake and autotools, along with the related
source snippet, and the `--with-egd-socket=` `./configure` option.
Closes#11556
Fix `stdint.h` and `inttypes.h` detection with non-autotools builds on
Windows. (autotools already auto-detected them accurately.)
`lib/config-win32.h` builds (e.g. `Makefile.mk`):
- set `HAVE_STDINT_H` where supported.
- set `HAVE_INTTYPES_H` for MinGW.
CMake:
- auto-detect them on Windows. (They were both force-disabled.)
- delete unused `CURL_PULL_STDINT_H`.
- delete unused `CURL_PULL_INTTYPES_H`.
- stop detecting `HAVE_STDINT_H` twice.
Present since the initial CMake commit: 4c5307b456
curl doesn't use these C99 headers, we need them now to workaround
broken wolfSSL builds. Ref: #10739
Once that clears up, we can delete these detections and macros (unless
we want to keep them for future us.)
Reviewed-by: Daniel Stenberg
Closes#10745
- they are mostly pointless in all major jurisdictions
- many big corporations and projects already don't use them
- saves us from pointless churn
- git keeps history for us
- the year range is kept in COPYING
checksrc is updated to allow non-year using copyright statements
Closes#10205
`Curl_getaddrinfo_ex()` gets _defined_ with `HAVE_GETADDRINFO` set. But,
`hostip4.c` _used_ it with `HAVE_GETADDRINFO_THREADSAFE` set alone. It
meant a build with the latter, but without the former flag could result
in calling this function but not defining it, and failing to link.
Patch this by adding an extra check for `HAVE_GETATTRINFO` around the
call.
Before this patch, build systems prevented this condition. Now they
don't need to.
While here, simplify the related CMake logic on Windows by setting
`HAVE_GETADDRINFO_THREADSAFE` to the detection result of
`HAVE_GETADDRINFO`. This expresses the following intent clearer than
the previous patch and keeps the logic in a single block of code:
When we have `getaddrinfo()` on Windows, it's always threadsafe.
Follow-up to 67d88626d4
Reviewed-by: Jay Satiro
Closes#9734
This patch aims to cleanup the use of `process.h` header and the macro
`HAVE_PROCESS_H` associated with it.
- `process.h` is always available on Windows. In curl, it is required
only for `_beginthreadex()` in `lib/curl_threads.c`.
- `process.h` is also available in MS-DOS. In curl, its only use was in
`lib/smb.c` for `getpid()`. But `getpid()` is in fact declared by
`unistd.h`, which is always enabled via `lib/config-dos.h`. So the
header is not necessary.
- `HAVE_PROCESS_H` was detected by CMake, forced to 1 on Windows and
left to real detection for other platforms.
It was also set to always-on in `lib/config-win32.h` and
`lib/config-dos.h`.
In autotools builds, there was no detection and the macro was never
set.
Based on these observations, in this patch we:
- Rework Windows `getpid` logic in `lib/smb.c` to always use the
equivalent direct Win32 API function `GetCurrentProcessId()`, as we
already did for Windows UWP apps. This makes `process.h` unnecessary
here on Windows.
- Stop #including `process.h` into files where it was not necessary.
This is everywhere, except `lib/curl_threads.c`.
> Strangely enough, `lib/curl_threads.c` compiled fine with autotools
> because `process.h` is also indirecty included via `unistd.h`. This
> might have been broken in autotools MSVC builds, where the latter
> header is missing.
- Delete all remaining `HAVE_PROCESS_H` feature guards, for they were
unnecessary.
- Delete `HAVE_PROCESS_H` detection from CMake and predefined values
from `lib/config-*.h` headers.
Reviewed-by: Jay Satiro
Closes#9703
`lib/config-win32.h` enables this configuration option unconditionally.
Make it apply to CMake builds as well.
While here, delete a broken check for
`HAVE_SOCKADDR_IN6_SIN6_SCOPE_ID` from `CMakeLists.txt`. This came with
the initial commit [1], but did not include the actual verification code
inside `CMake/CurlTests.c`, so it always failed. A later commit [2]
added a second test, for non-Windows platforms.
Enabling this flag causes test 1056 to fail with CMake builds, as they
do with autotools builds. Let's apply the same solution and ignore the
results here as well.
[1] 4c5307b456
[2] aec7c5a87c
Reviewed-by: Daniel Stenberg
Assisted-by: Marcel Raad
Closes#9726
autotools enables this configuration option unconditionally for Windows
[^1]. Do the same in CMake.
The above will make this work for all reasonably recent environments.
The logic present in `lib/config-win32.h` [^2] has the following
exceptions which we did not cover in this CMake update:
- Builds targeting Windows 2000 and earlier
- MS Visual C++ 5.0 (1997) and earlier
Also make sure to disable this feature when `HAVE_GETADDRINFO` isn't
set, to avoid a broken build. We might want to handle that in the C
sources in a future commit.
[^1]: 68fa9bf3f5/m4/curl-functions.m4 (L2067-L2070)
[^2]: 68fa9bf3f5/lib/config-win32.h (L511-L528)Closes#9727
`HAVE_SIGNAL` means the availability of the `signal()` function in
autotools, while in CMake it meant the availability of that function
_and_ the symbol `SIGALRM`.
The latter is not available on Windows, but the function is, which means
on Windows, autotools did define `HAVE_SIGNAL`, but CMake did not,
introducing a slight difference into the binaries.
This patch syncs CMake behaviour with autotools to look for the function
only.
The logic came with the initial commit adding CMake support to curl, so
the commit history doesn't reveal the reason behind it. In any case,
it's best to check the existence of `SIGALRM` directly in the source
before use. For now, curl builds fine with `HAVE_SIGNAL` enabled and
`SIGALRM` missing.
Follow-up to 68fa9bf3f5Closes#9725
Enable `HAVE_UNISTD_H`, `HAVE_STRTOK_R` and `HAVE_STRCASECMP` detection
on Windows, instead of having predefined values.
With these features detected correctly, CMake Windows builds get closer
to the autotools and `config-win32.h` ones.
This also fixes detecting `HAVE_FTRUNCATE` correctly, which required
`unistd.h`.
Fixing `ftruncate()` in turn causes a build warning/error with legacy
MinGW/MSYS1 due to an offset type size mismatch. This env misses to
detect `HAVE_FILE_OFFSET_BITS`, which may be a reason. This patch
force-disables `HAVE_FTRUNCATE` for this platform.
Reviewed-by: Daniel Stenberg
Closes#9687
Detecting headers and lib separately makes sense when headers come in
variations or with extra ones, but this wasn't the case here. These were
duplicate/parallel macros that we had to keep in sync with each other
for a working build. This patch leaves a single macro for each of these
dependencies:
- Rely on `HAVE_LIBZ`, delete parallel `HAVE_ZLIB_H`.
Also delete CMake logic making sure these two were in sync, along with
a toggle to turn off that logic, called `CURL_SPECIAL_LIBZ`.
Also delete stray `HAVE_ZLIB` defines.
There is also a `USE_ZLIB` variant in `lib/config-dos.h`. This patch
retains it for compatibility and deprecates it.
- Rely on `USE_LIBSSH2`, delete parallel `HAVE_LIBSSH2_H`.
Also delete `LIBSSH2_WIN32`, `LIBSSH2_LIBRARY` from
`winbuild/MakefileBuild.vc`, these have a role when building libssh2
itself. And `CURL_USE_LIBSSH`, which had no use at all.
Also delete stray `HAVE_LIBSSH2` defines.
- Rely on `USE_LIBSSH`, delete parallel `HAVE_LIBSSH_LIBSSH_H`.
Also delete `LIBSSH_WIN32`, `LIBSSH_LIBRARY` and `HAVE_LIBSSH` from
`winbuild/MakefileBuild.vc`, these were the result of copy-pasting the
libssh2 line, and were not having any use.
- Delete unused `HAVE_LIBPSL_H` and `HAVE_LIBPSL`.
Reviewed-by: Daniel Stenberg
Closes#9652
1. Re-enable `HAVE_GETADDRINFO` detection on Windows
Commit d08ee3c83d (in 2013) added logic
that automatically assumed `getaddrinfo()` to be present for builds
with IPv6 enabled. As it turns out, certain toolchains (e.g. original
MinGW) by default target older Windows versions, and thus do not
support `getaddrinfo()` out of the box. The issue was masked for
a while by CMake builds forcing a newer Windows version, but that
logic got deleted in commit 8ba22ffb20.
Since then, some CI builds started failing due to IPv6 enabled,
`HAVE_GETADDRINFO` set, but `getaddrinfo()` in fact missing.
It also turns out that IPv6 works without `getaddrinfo()` since commit
67a08dca27 (from 2019, via #4662). So,
to resolve all this, we can now revert the initial commit, thus
restoring `getaddrinfo()` detection and support IPv6 regardless of its
outcome.
Reported-by: Daniel Stenberg
2. Omit `bcrypt` with original MinGW
Original (aka legacy/old) MinGW versions do not support `bcrypt`
(introduced with Vista). We already have logic to handle that in
`lib/rand.c` and autotools builds, where we do not call the
unsupported API and do not link `bcrypt`, respectively, when using
original MinGW.
This patch ports that logic to CMake, fixing the link error:
`c:/mingw/bin/../lib/gcc/mingw32/9.2.0/../../../../mingw32/bin/ld.exe: cannot find -lbcrypt`
Ref: https://ci.appveyor.com/project/curlorg/curl/builds/44624888/job/40vle84cn4vle7s0#L508
Regression since 76172511e7Fixes#9214Fixes#9393Fixes#9395Closes#9396
Add licensing and copyright information for all files in this repository. This
either happens in the file itself as a comment header or in the file
`.reuse/dep5`.
This commit also adds a Github workflow to check pull requests and adapts
copyright.pl to the changes.
Closes#8869
This was previously defined by the obsolete AC_TYPE_SIGNAL macro,
which was removed in 2682e5f5. The deprecation text says
> Your code may safely assume C89 semantics that RETSIGTYPE is void.
So, remove it and just use void instead.
Closes#6861
Reported by the new script 'scripts/copyright.pl'. The script has a
regex whitelist for the files that don't need copyright headers.
Removed three (mostly usesless) README files from docs/
Closes#5141
Otherwise Curl_gethostname always fails. Windows has gethostname
since Vista according to
http://msdn.microsoft.com/en-us/library/ms738527%28VS.85%29.aspx, but
accordings to byte_bucket's VC 2005 documentation, it is available even
in Windows 95. (possibly after installing a Platform SDK, the
Windows Server 2003 SP1 Platform SDK should be sufficient).
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
autotools does not use features.h nor _BSD_SOURCE. As this macro
triggers warnings since glibc 2.20, remove it. It should not have
functional differences.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
