- errors returned by Curl_xfer_write_resp() and the header variant are
not errors in the protocol. The result needs to be returned on the
next recv() from the protocol filter.
- make xfer write errors for response data cause the stream to be
cancelled
- added pytest test_02_14 and test_02_15 to verify that also for
parallel processing
Reported-by: Laramie Leavitt
Fixes#13411Closes#13424
A connection that has seen an HTTP major version now refuses any other
major HTTP version in future responses. Previously, a HTTP/1.x
connection would just silently accept HTTP/2 or HTTP/3 in the status
lines as long as it had support for those built-in. It would then just
lead to confusion and badness.
Indirectly Spotted by CodeSonar which identified a duplicate assignment
in this function.
Add test 471 to verify
Closes#13421
A returned error code makes other return value unreliable, and in this
case potentially uninitialized. On error, do not read other return
values like the nread counter.
Spotted by CodeSonar
Closes#13418
In the function AcceptServerConnect() the newly created socket would
leak if Curl_conn_tcp_accepted_set() returns error. Which basically
should never happen.
Spotted by CodeSonar.
Closes#13417
By default the API inhibits empty queries and fragments extracted.
Unless this new flag is set.
This also makes the behavior more consistent: without it set, zero
length queries and fragments are considered not present in the URL. With
the flag set, they are returned as a zero length strings if they were in
fact present in the URL.
This applies when extracting the individual query and fragment
components and for the full URL.
Closes#13396
Using the URL API for a redirect URL when the redirected-to string
starts with a hash, ie is only a fragment, the API would produce the
wrong final URL.
Adjusted test 1560 to test for several new redirect cases.
Closes#13394
Building curl with -Wcomma, I see warnings about "possible misuse of
comma operator here" and moving fields assignment out of the for() fixes
it.
Closes#13392
- add `Curl_hash_offt` as hashmap between a `curl_off_t` and
an object. Use this in h2+h3 connection filters to associate
`data->id` with the internal stream state.
- changed implementations of all affected connection filters
- removed `h2_ctx*` and `h3_ctx*` from `struct HTTP` and thus
the easy handle
- solves the problem of attaching "foreign protocol" easy handles
during connection shutdown
Test 1616 verifies the new hash functions.
Closes#13204
I implemented the IDN functions for macOS and iOS using Unicode
libraries coming with macOS and iOS.
Builds and runs here on macOS 14.2.1. Also verified to load and
run on older macOS version 10.13.
Build requires macOS SDK 13 or equivalent.
Set `-DUSE_APPLE_IDN=ON` CMake option to enable it.
With autotools and other build tools, set these manual options:
```
CPPFLAGS=-DUSE_APPLE_IDN
LIBS=-licucore
```
Completes TODO 1.6.
TODO: add autotools option and feature-detection.
Refs: #5330#5371
Co-authored-by: Viktor Szakats
Closes#13246
- fix flow handling in ngtcp2 to ACK data on streams
we abort ourself.
- extend test_02_23* cases to also run for h3
- skip test_02_23* for OpenSSL QUIC as it gets stalled
on progressing the connection
Closes#13374
- remember error encountered in invoking write callback and always fail
afterwards without further invokes
- check behaviour in test_02_17 with h2-pausing client
Reported-by: Pavel Kropachev
Fixes#13337Closes#13340
Before this patch the internal feature detection macro
`HAS_MBEDTLS_RESULT_CODE_BASED_FUNCTIONS` was defined in three files,
with an incomplete logic in one of them. In Unity mode that spilled
into another source file and broke the build.
Closes#13377
Since we can go to the CONNECT state from PENDING, potentially multiple
times for a single transfer, this change introdues a SETUP state that
happens before CONNECT when doing a new transfer.
Now, doing a redirect on a handle goes back to SETUP (not CONNECT like
before) and we initilize the connect timeout etc in SETUP. Previously,
we would do it in CONNECT but that would make it unreliable in cases
where a transfer goes in and out between CONNECT and PENDING multiple
times.
SETUP is transient, so the handle never actually stays in that state.
Additionally: take care of timeouts of PENDING transfers in
curl_multi_perform()
Ref: #13227Closes#13371
When there is a "change" in a multi handle and pending handles are moved
back to the main list to be retested if they can proceed further (for
example a previous transfer completed or a connection has a confirmed
multiplexed state), the timeout check in multi_runsingle() would not
trigger because it required an established connection.
This could make a pending tranfer go back to pending state even though
it had been "in progress" for a longer time than permitted. By removing
the requirement for an associated connection, the timeout check will be
done proper even for transfers that has not yet been assigned one.
Ref #13227
Reported-by: Rahul Krishna M
Closes#13276
OS/400 ascii fputc wrapper deviates from the posix standard by the
fact that it returns the ebcdic encoding of the original ascii
character. Testing for a matching value for success will then always
fail.
This commit replaces the chariacter comparison by an explicit error
return check.
Follow-up to ef2cf58Closes#13367
Before this patch `lib/curl_setup.h` defined these two macros right
next to each other, then the source code used them interchangeably.
After this patch, `USE_HTTP3` guards all HTTP/3 / QUIC features.
(Like `USE_HTTP2` does for HTTP/2.) `ENABLE_QUIC` is no longer used.
This patch doesn't change the way HTTP/3 is enabled via autotools
or CMake. Builders who enabled HTTP/3 manually by defining both of
these macros via `CPPFLAGS` can now delete `-DENABLE_QUIC`.
Closes#13352
Before this patch, two macros were used to guard IPv6 features in curl
sources: `ENABLE_IPV6` and `USE_IPV6`. This patch makes the source use
the latter for consistency with other similar switches.
`-DENABLE_IPV6` remains accepted for compatibility as a synonym for
`-DUSE_IPV6`, when passed to the compiler.
`ENABLE_IPV6` also remains the name of the CMake and `Makefile.vc`
options to control this feature.
Closes#13349
- delay loading of trust anchors and CRLs after the ClientHello
has been sent off
- add tracing to IO operations
- on IO errors, return the CURLcode of the underlying filter
Closes#13339
Tests were consistently flaky for a while.
Also fix compiler warnings in `CertOpenStore()` calls for old MSVC compilers:
```
C:/projects/curl/lib/vtls/schannel.c(688):
warning C4306: 'type cast' : conversion from 'int' to 'LPCSTR' of greater size
C:/projects/curl/lib/vtls/schannel_verify.c(642):
warning C4306: 'type cast' : conversion from 'int' to 'LPCSTR' of greater size
```
Ref: https://ci.appveyor.com/project/curlorg/curl/builds/49580310/job/ywu2y44kymgc0nif#L106Closes#13330
- When the writing of response data fails, reset the stream
and do not return a callback error to nghttp2. That would
be a fatal error for the connection and harm other requests.
- add test cases for various abort scenarios
Reported-by: Konstantin Kuzov
Fixes#13292Closes#13298
Since mbedTLS v3.6.0, the RNG check added in ssl_conf_check() will fail
if no RNG is provided when calling mbedtls_ssl_setup().
Therefore, mbedtls_ssl_conf_rng() needs to be called before the SSL
context is passed to mbedtls_ssl_setup().
Ref: b422cab052
Signed-off-by: Kailun Qin <kailun.qin@intel.com>
Closes#13314
- add curl_int64_t signed 64-bit type for lib use
- define CURL_PRId64, CURL_PRIu64 format ids
- use curl_int64_t in vquic
curl_int64_t signed complements the existing curl_uint64_t unsigned.
Note that `curl_int64_t` and `int64_t` are assignable from each other
but not identical. Some platforms with 64 long type defint int64_t as
"long long" (staring at macOS) which messes up things like pointers and
format identifiers.
Closes https://github.com/curl/curl/pull/13293
- Use data->multi and not data->multi_easy to refer to the active multi.
The easy handle's active multi is always data->multi.
This is a follow up to 757dfdf which changed curl so that an easy handle
used with the easy interface and then multi interface cannot have two
different multi handles associated with it at the same time
(data->multi_easy from the easy interface and data->multi from the multi
interface).
Closes https://github.com/curl/curl/pull/12665
