The check may take many milliseconds, so now it is performed once the
value is first needed. Also, this change makes sure that the value is
not used if the resolve is set to be IPv4-only.
Closes#9553
This protects IPv4-only transfers from undesired bad IPv6-related side
effects and make IPv4 transfers in dual-stack libcurl behave the same
way as in IPv4 single-stack libcurl.
Closes#9540
Have curl_multi_init() use a much larger DNS hash table than used for
the easy interface to scale and perform better when used with _many_
host names.
curl_share_init() sets an in-between size.
Inspired-by: Ivan Tsybulin
See #9340Closes#9376
Following the footsteps of other clients like Firefox/Chrome. RFC 6761
says clients SHOULD do this.
Add test 389 to verify.
Reported-by: TheKnarf on github
Fixes#9192Closes#9296
Add licensing and copyright information for all files in this repository. This
either happens in the file itself as a comment header or in the file
`.reuse/dep5`.
This commit also adds a Github workflow to check pull requests and adapts
copyright.pl to the changes.
Closes#8869
When built without DNS-over-HTTP and without asynchronous resolvers,
neither the dns nor the data parameters are used.
That is Curl_resolv_check appears to call
Curl_resolver_is_resolved(data, dns). But,
with CURL_DISABLE_DOH without CURLRES_ASYNCH, the call is actually
elided via a macro definition.
This fix resolves the resultant: "unused parameter 'data'" error.
Closes#8505
By just glancing at the code, it looks like there is a memleak if the
call to Curl_inet_pton() fails. Looking closer, it is clear that the
call to Curl_inet_pton() can not fail, so the code will never leak
memory. However, we can make this obvious by moving the allocation
after the if-statement.
Closes https://github.com/curl/curl/pull/7796
- Do not assume IPv6 is not working when getaddrinfo is not present.
The check to see if IPv6 actually works is now independent of whether
there is any resolver that can potentially resolve a hostname to IPv6.
Prior to this change if getaddrinfo() was not found at compile time then
Curl_ipv6works() would be defined as a macro that returns FALSE.
When getaddrinfo is not found then libcurl is built with CURLRES_IPV4
defined instead of CURLRES_IPV6, meaning that it cannot do IPv6 lookups
in the traditional way. With this commit if libcurl is built with IPv6
support (ENABLE_IPV6) but without getaddrinfo (CURLRES_IPV6), and the
IPv6 stack is actually working, then it is possible for libcurl to
resolve IPv6 addresses by using DoH.
Ref: https://github.com/curl/curl/issues/7483#issuecomment-890765378
Closes https://github.com/curl/curl/pull/7529
- the data needs to be "line-based" anyway since it's also passed to the
debug callback/application
- it makes infof() work like failf() and consistency is good
- there's an assert that triggers on newlines in the format string
- Also removes a few instances of "..."
- Removes the code that would append "..." to the end of the data *iff*
it was truncated in infof()
Closes#7357
From Apples documentation on SCDynamicStoreCopyProxies, "Return Value: A
dictionary of key-value pairs that represent the current internet proxy
settings, or NULL if no proxy settings have been defined or if an error
occurred. You must release the returned value."
Failure to release the returned value of SCDynamicStoreCopyProxies can
result in a memory leak.
Source: https://developer.apple.com/documentation/systemconfiguration/1517088-scdynamicstorecopyproxiesCloses#7265
Follow-up to 1a0ebf6632
- Check the return code to Curl_inet_pton() in two instances, even
though we know the input is valid so the functions won't fail.
- Clear the 'struct sockaddr_in' struct before use so that the
'sin_zero' field isn't left uninitialized.
Detected by Coverity.
Assisted-by: Harry Sintonen
Closes#7163
Resolving the case insensitive host name 'localhost' now returns the
addresses 127.0.0.1 and (if IPv6 is enabled) ::1 without using any
resolver.
This removes the risk that users accidentally resolves 'localhost' to
something else. By making sure 'localhost' is always local, we can
assume a "secure context" for such transfers (for cookies etc).
Closes#7039
Also, use a single function library-wide for detecting if a given hostname is
a numerical IP address.
Reported-by: Harry Sintonen
Fixes#7146Closes#7149
The Curl_resolv() had special code (when built in debug mode) for when
resolving the host name "LocalHost" (using that exact casing). It would
then get the host name from the --interface option instead.
This development-only feature was not used by anything (anymore) and we
have the --resolve feature if we want to play similar tricks properly
going forward.
Closes#7044
This was previously defined by the obsolete AC_TYPE_SIGNAL macro,
which was removed in 2682e5f5. The deprecation text says
> Your code may safely assume C89 semantics that RETSIGTYPE is void.
So, remove it and just use void instead.
Closes#6861
- Define Curl_resolver_error function only when USE_CURL_ASYNC.
Prior to this change building curl without an asynchronous resolver
backend (c-ares or threaded) and without DoH (DNS-over-HTTPS, which is
also asynchronous but independent of resolver backend) would cause a
build error since Curl_resolver_error is called by and evaluates
variables only available in asynchronous builds.
Reported-by: Benbuck Nason
Fixes https://github.com/curl/curl/issues/6831
Closes https://github.com/curl/curl/pull/6832
Both were used for the same purposes and there was no logical separation
between them. Combined, this also saves 16 bytes in less holes in my
test build.
Closes#6798
... with the help of Curl_resolver_error() which now is moved from
asyn-thead.c and is provided globally for this purpose.
Follow-up to 35ca04ce1b
Makes test 1188 work for c-ares builds
Closes#6626
- Guard some Curl_async accesses with USE_CURL_ASYNC instead of
!CURLRES_SYNCH.
This is another follow-up to 8335c64 which moved the async struct from
the connectdata struct into the Curl_easy struct. A previous follow-up
6cd167a fixed building for sync resolver by guarding some async struct
accesses with !CURLRES_SYNCH. The problem is since DOH (DNS-over-HTTPS)
is available as an asynchronous secondary resolver the async struct may
be used even when libcurl is built for the sync resolver. That means
that CURLRES_SYNCH and USE_CURL_ASYNC may be defined at the same time.
Closes https://github.com/curl/curl/pull/6603
... in most cases instead of 'struct connectdata *' but in some cases in
addition to.
- We mostly operate on transfers and not connections.
- We need the transfer handle to log, store data and more. Everything in
libcurl is driven by a transfer (the CURL * in the public API).
- This work clarifies and separates the transfers from the connections
better.
- We should avoid "conn->data". Since individual connections can be used
by many transfers when multiplexing, making sure that conn->data
points to the current and correct transfer at all times is difficult
and has been notoriously error-prone over the years. The goal is to
ultimately remove the conn->data pointer for this reason.
Closes#6425
We currently use both spellings the british "behaviour" and the american
"behavior". However "behavior" is more used in the project so I think
it's worth dropping the british name.
Closes#6395
Extend the syntax of CURLOPT_RESOLVE strings: allow using a '+' prefix
(similar to the existing '-' prefix for removing entries) to add
DNS cache entries that will time out just like entries that are added
by libcurl itself.
Append " (non-permanent)" to info log message in case a non-permanent
entry is added.
Adjust relevant comments to reflect the new behavior.
Adjust documentation.
Extend unit1607 to test the new functionality.
Closes#6294
When USE_RESOLVE_ON_IPS is set (defined on macOS), it means that
numerical IP addresses still need to get "resolved" - but not with DoH.
Reported-by: Viktor Szakats
Fixes#5454Closes#5459
- Stick to a single unified way to use structs
- Make checksrc complain on 'typedef struct {'
- Allow them in tests, public headers and examples
- Let MD4_CTX, MD5_CTX, and SHA256_CTX typedefs remain as they actually
typedef different types/structs depending on build conditions.
Closes#5338
More connection cache accesses are protected by locks.
CONNCACHE_* is a beter prefix for the connection cache lock macros.
Curl_attach_connnection: now called as soon as there's a connection
struct available and before the connection is added to the connection
cache.
Curl_disconnect: now assumes that the connection is already removed from
the connection cache.
Ref: #4915Closes#5009
The code was duplicated in the various resolver backends.
Also, it was called after the call to `Curl_ipvalid`, which matters in
case of `CURLRES_IPV4` when called from `connect.c:bindlocal`. This
caused test 1048 to fail on classic MinGW.
The code ignores `conn->ip_version` as done previously in the
individual resolver backends.
Move the call to the `resolver_start` callback up to appease test 655,
which wants it to be called also for literal addresses.
Closes https://github.com/curl/curl/pull/4798
