- pytest has changed the signature of the hook pytest_report_header()
for some obscure reason and that change landed in our CI now
- remove the changed param that we never used anyway
Closes#13037
A libpsl install without data and no built-in database is now considered
bad enough to reject all cookies since they cannot be checked. It is
somewhat of a user error, but still.
Reported-by: Dan Fandrich
Closes#13033
- Move all the "upload_done" handling to request.c
- add possibility to abort sending of a request
- add `Curl_req_done_sending()` for checks
- transfer.c: readwrite_upload() now clean
- removing data->state.ulbuf and data->req.upload_fromhere
- as well as data->req.upload_present
- set data->req.upload_done on having read all from
the client and completely flushed the send buffer
- tftp, remove setting of data->req.upload_fromhere
- serves no purpose as `upload_present` is not set
and the data itself is directly `sendto()` anyway
- smtp, make upload EOB conversion a client reader
- xfer_ulbuf addition
- add xfer_ulbuf for borrowing, similar to xfer_buf
- use in file upload
- use in c-hyper body sending
- h1-proxy, remove init of data->state.uilbuf that is never used
- smb, add own send_buf instead of using data->state.ulbuf
Closes#13010
- when unable to obtain a new chunk on a softlimit bufq,
this is an allocation error and needs to be reported as
such.
- writes into a soflimit bufq never must be partial success
Reported-by: Dan Fandrich
Fixes#13020Closes#13023
With the recent changes to completion file building, the files were
built always and only installation was selectively disabled. Now, when
they are disabled they aren't even built, avoiding a build-time error in
environments where it's not possible to run the curl binary that was
just created (e.g. if library paths were not set up correctly).
Follow-up to 0f7aba83c
Reported-by: av223119 on github
Fixes#13027Closes#13030
The code that attempted to skip building the shell completions didn't
work properly and tried to build them even if perl wasn't available.
This step, as well as the install step, is now properly skipped without
perl.
Follow-up to 89733e2ddCloses#13022
This fixes miscellaneous typos and duplicated words in the docs, lib
and test comments and a few user facing errorstrings.
Author: RainRat on Github
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Dan Fandrich <dan@coneharvesters.com>
Closes: #13019
The --with-fish-functions-dir and --with-zsh-functions-dir options
currently have no effect on a normal build because the scripts/ directory
where they're used is not built. Add scripts/ to a normal build and
change the completion options to default to off to preserve the existing
behaviour.
Closes: #12906
- replace `Curl_read()`, `Curl_write()` and `Curl_nwrite()` to
clarify when and at what level they operate
- send/recv of transfer related data is now done via
`Curl_xfer_send()/Curl_xfer_recv()` which no longer has
socket/socketindex as parameter. It decides on the transfer
setup of `conn->sockfd` and `conn->writesockfd` on which
connection filter chain to operate.
- send/recv on a specific connection filter chain is done via
`Curl_conn_send()/Curl_conn_recv()` which get the socket index
as parameter.
- rename `Curl_setup_transfer()` to `Curl_xfer_setup()` for
naming consistency
- clarify that the special CURLE_AGAIN hangling to return
`CURLE_OK` with length 0 only applies to `Curl_xfer_send()`
and CURLE_AGAIN is returned by all other send() variants.
- fix a bug in websocket `curl_ws_recv()` that mixed up data
when it arrived in more than a single chunk (to be made
into a sperate PR, also)
Added as documented [in
CLIENT-READER.md](5b1f31dfba/docs/CLIENT-READERS.md).
- old `Curl_buffer_send()` completely replaced by new `Curl_req_send()`
- old `Curl_fillreadbuffer()` replaced with `Curl_client_read()`
- HTTP chunked uploads are now formatted in a client reader added when
needed.
- FTP line-end conversions are done in a client reader added when
needed.
- when sending requests headers, remaining buffer space is filled with
body data for sending in "one go". This is independent of the request
body size. Resolves#12938 as now small and large requests have the
same code path.
Changes done to test cases:
- test513: now fails before sending request headers as this initial
"client read" triggers the setup fault. Behaves now the same as in
hyper build
- test547, test555, test1620: fix the length check in the lib code to
only fail for reads *smaller* than expected. This was a bug in the
test code that never triggered in the old implementation.
Closes#12969
The curldown conversion accidentally replaced daniel@haxx.se with
just daniel.se. This reverts back to the proper email address in
the curldown docs as well as in a few other stray places where it
was incorrect (while unrelated to curldown).
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Closes: #12997
When disabling all protocols without enabling any, the resulting
set of allowed protocols remained the default set. Clearing the
allowed set before inspecting the passed value from --proto make
the set empty even in the errorpath of no protocols enabled.
Co-authored-by: Dan Fandrich <dan@telarity.com>
Reported-by: Dan Fandrich <dan@telarity.com>
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Closes: #13004
- replace `Curl_read()`, `Curl_write()` and `Curl_nwrite()` to
clarify when and at what level they operate
- send/recv of transfer related data is now done via
`Curl_xfer_send()/Curl_xfer_recv()` which no longer has
socket/socketindex as parameter. It decides on the transfer
setup of `conn->sockfd` and `conn->writesockfd` on which
connection filter chain to operate.
- send/recv on a specific connection filter chain is done via
`Curl_conn_send()/Curl_conn_recv()` which get the socket index
as parameter.
- rename `Curl_setup_transfer()` to `Curl_xfer_setup()` for
naming consistency
- clarify that the special CURLE_AGAIN hangling to return
`CURLE_OK` with length 0 only applies to `Curl_xfer_send()`
and CURLE_AGAIN is returned by all other send() variants.
- fix a bug in websocket `curl_ws_recv()` that mixed up data
when it arrived in more than a single chunk
The method for sending not just raw bytes, but bytes that are either
"headers" or "body". The send abstraction stack, to to bottom, now is:
* `Curl_req_send()`: has parameter to indicate amount of header bytes,
buffers all data.
* `Curl_xfer_send()`: knows on which socket index to send, returns
amount of bytes sent.
* `Curl_conn_send()`: called with socket index, returns amount of bytes
sent.
In addition there is `Curl_req_flush()` for writing out all buffered
bytes.
`Curl_req_send()` is active for requests without body,
`Curl_buffer_send()` still being used for others. This is because the
special quirks need to be addressed in future parts:
* `expect-100` handling
* `Curl_fillreadbuffer()` needs to add directly to the new
`data->req.sendbuf`
* special body handlings, like `chunked` encodings and line end
conversions will be moved into something like a Client Reader.
In functions of the pattern `CURLcode xxx_send(..., ssize_t *written)`,
replace the `ssize_t` with a `size_t`. It makes no sense to allow for negative
values as the returned `CURLcode` already specifies error conditions. This
allows easier handling of lengths without casting.
Closes#12964
If the easy handle that is being added to a multi handle has previously
been used for curl_easy_perform(), there is a private multi handle here
that we can kill off. While it flushes some caches etc for the easy
handle would it be used for an easy interface transfer again after being
used in the multi stack, this cleanup simplifies behavior and uses less
memory.
Closes#12992
Curl_read/Curl_write clarifications
- replace `Curl_read()`, `Curl_write()` and `Curl_nwrite()` to 1clarify
when and at what level they operate
- send/recv of transfer related data is now done via
`Curl_xfer_send()/Curl_xfer_recv()` which no longer has
socket/socketindex as parameter. It decides on the transfer setup of
`conn->sockfd` and `conn->writesockfd` on which connection filter
chain to operate.
- send/recv on a specific connection filter chain is done via
`Curl_conn_send()/Curl_conn_recv()` which get the socket index as
parameter.
- rename `Curl_setup_transfer()` to `Curl_xfer_setup()` for naming
consistency
- clarify that the special CURLE_AGAIN handling to return `CURLE_OK`
with length 0 only applies to `Curl_xfer_send()` and CURLE_AGAIN is
returned by all other send() variants.
SingleRequest reshuffling
- move functions into request.[ch]
- differentiate between reset and free
- add Curl_req_done() to perform last actions
- add a send `bufq` to SingleRequest for future use in keeping upload data
Closes#12963
In order to make MSAN happy:
==2200945==WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0x596f3b3ed246 in curlx_strtoofft [...]/libcurl/src/lib/strtoofft.c:239:11
#1 0x596f3b402156 in Curl_httpchunk_read [...]/libcurl/src/lib/http_chunks.c:149:12
#2 0x596f3b348550 in readwrite_data [...]/libcurl/src/lib/transfer.c:607:11
[...]
==2202041==WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0x5a3fab66a72a in Curl_parse_port [...]/libcurl/src/lib/urlapi.c:547:8
#1 0x5a3fab650645 in parse_authority [...]/libcurl/src/lib/urlapi.c:796:12
#2 0x5a3fab6740f6 in parseurl [...]/libcurl/src/lib/urlapi.c:1176:16
#3 0x5a3fab664fc5 in parseurl_and_replace [...]/libcurl/src/lib/urlapi.c:1342:12
[...]
==2202320==WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0x569076a0d6b0 in ipv4_normalize [...]/libcurl/src/lib/urlapi.c:683:12
#1 0x5690769f2820 in parse_authority [...]/libcurl/src/lib/urlapi.c:803:10
#2 0x569076a160f6 in parseurl [...]/libcurl/src/lib/urlapi.c:1176:16
#3 0x569076a06fc5 in parseurl_and_replace [...]/libcurl/src/lib/urlapi.c:1342:12
[...]
Signed-off-by: Louis Solofrizzo <lsolofrizzo@scaleway.com>
Closes#12995
Refactoring of the client writer that passes the data to the
client/application's callback functions.
- split out into own source cw-out.[ch] from sendf.c
- move tempwrite and tempcount from data->state into the context of the
client writer
- redesign the 3 tempwrite dynbufs as a linked list of dynbufs. On
paused transfers, this allows to "record" interleaved HEADER/BODY
chunks to be "played back" in the same order on unpausing.
- keep the overall size limit of all buffered data to DYN_PAUSE_BUFFER.
On exceeding that, return CURLE_TOO_LARGE instead of
CURLE_OUT_OF_MEMORY as before.
- add method to be called when a transfer is DONE to allow writing of
any data still buffered
- when paused, record HEADER writes exactly as they come for later
playback. HEADERs are documented to be written one-by-one.
Closes#12898
- from `conn->bits.authneg` to `data->req.authneg`
- this is a property of the request about to be made
and not a property of the connection
- in multiuse connections, transfer could step on each others
toes here potentially.
Closes#12949
- add a client writer that does "push" response
headers written to the client if the headers api
is enabled
- remove special handling in sendf.c
- needs to be installed very early on connection
setup to catch CONNECT response headers
Closes#12880
Remove curl_mimepart object from UserDefined structure when
CURL_DISABLE_MIME flag is active. Reduce size of UserDefined structure.
Also remove unreachable code: when CURL_DISABLE_MIME is set, httpreq can
never have HTTPREQ_POST_MIME value and the same goes for the
CURL_DISABLE_FORM_API flag and the HTTPREQ_POST_FORM value
Closes#12948
... to not rely on wrapping, since it is an undefined behavior that is
not what always might happen. This is in our private strtoff() parser
function, used only on platforms without a native version.
Reported-by: vulnerabilityspotter on hackerone
Closes#12990
