all: remove FIXME and TODO comments

We can always improve. These comments tend to linger and go misleading
or plain wrong over time.

Closes #16283

lib/cf-h1-proxy.c

@@ -660,7 +660,6 @@ static CURLcode cf_h1_proxy_connect(struct Curl_cfilter *cf,
     cf->ctx = ts;
   }
 
-  /* TODO: can we do blocking? */
   /* We want "seamless" operations through HTTP proxy tunnel */
 
   result = H1_CONNECT(cf, data, ts);

lib/cf-h2-proxy.c

@@ -1408,7 +1408,7 @@ static ssize_t cf_h2_proxy_send(struct Curl_cfilter *cf,
   ssize_t nwritten;
   CURLcode result;
 
-  (void)eos; /* TODO, maybe useful for blocks? */
+  (void)eos;
   if(ctx->tunnel.state != H2_TUNNEL_ESTABLISHED) {
     *err = CURLE_SEND_ERROR;
     return -1;

lib/cf-https-connect.c

@@ -696,7 +696,6 @@ CURLcode Curl_cf_https_setup(struct Curl_easy *data,
       break;
     case CURL_HTTP_VERSION_3:
       /* We assume that silently not even trying H3 is ok here */
-      /* TODO: should we fail instead? */
       if(Curl_conn_may_http3(data, conn) == CURLE_OK)
         alpn_ids[alpn_count++] = ALPN_h3;
       alpn_ids[alpn_count++] = ALPN_h2;

lib/cf-socket.c

@@ -1325,7 +1325,6 @@ static CURLcode cf_tcp_connect(struct Curl_cfilter *cf,
     return CURLE_OK;
   }
 
-  /* TODO: need to support blocking connect? */
   if(blocking)
     return CURLE_UNSUPPORTED_PROTOCOL;
 
@@ -1432,7 +1431,7 @@ static void cf_socket_adjust_pollset(struct Curl_cfilter *cf,
     /* A listening socket filter needs to be connected before the accept
      * for some weird FTP interaction. This should be rewritten, so that
      * FTP no longer does the socket checks and accept calls and delegates
-     * all that to the filter. TODO. */
+     * all that to the filter. */
     if(ctx->listening) {
       Curl_pollset_set_in_only(data, ps, ctx->sock);
       CURL_TRC_CF(data, cf, "adjust_pollset, listening, POLLIN fd=%"
@@ -1850,7 +1849,7 @@ static CURLcode cf_udp_setup_quic(struct Curl_cfilter *cf,
   /* QUIC needs a connected socket, nonblocking */
   DEBUGASSERT(ctx->sock != CURL_SOCKET_BAD);
 
-  rc = connect(ctx->sock, &ctx->addr.curl_sa_addr,  /* NOLINT FIXME */
+  rc = connect(ctx->sock, &ctx->addr.curl_sa_addr,  /* NOLINT */
                (curl_socklen_t)ctx->addr.addrlen);
   if(-1 == rc) {
     return socket_connect_result(data, ctx->ip.remote_ip, SOCKERRNO);
@@ -2213,7 +2212,7 @@ struct Curl_cftype Curl_cft_tcp_accept = {
   cf_tcp_accept_connect,
   cf_socket_close,
   cf_socket_shutdown,
-  cf_socket_get_host,              /* TODO: not accurate */
+  cf_socket_get_host,
   cf_socket_adjust_pollset,
   cf_socket_data_pending,
   cf_socket_send,

lib/conncache.c

@@ -166,11 +166,11 @@ int Curl_cpool_init(struct cpool *cpool,
   if(!cpool->idata)
     return 1; /* bad */
   cpool->idata->state.internal = TRUE;
-  /* TODO: this is quirky. We need an internal handle for certain
-   * operations, but we do not add it to the multi (if there is one).
-   * But we give it the multi so that socket event operations can work.
-   * Probably better to have an internal handle owned by the multi that
-   * can be used for cpool operations. */
+  /* This is quirky. We need an internal handle for certain operations, but we
+   * do not add it to the multi (if there is one). We give it the multi so
+   * that socket event operations can work. Probably better to have an
+   * internal handle owned by the multi that can be used for cpool
+   * operations. */
   cpool->idata->multi = multi;
 #ifdef DEBUGBUILD
   if(getenv("CURL_DEBUG"))
@@ -1302,7 +1302,6 @@ static int conn_upkeep(struct Curl_easy *data,
                        void *param)
 {
   struct curltime *now = param;
-  /* TODO, shall we reap connections that return an error here? */
   Curl_conn_upkeep(data, conn, now);
   return 0; /* continue iteration */
 }

lib/connect.c

@@ -958,7 +958,7 @@ static CURLcode cf_he_connect(struct Curl_cfilter *cf,
     return CURLE_OK;
   }
 
-  (void)blocking; /* TODO: do we want to support this? */
+  (void)blocking;
   DEBUGASSERT(ctx);
   *done = FALSE;
 

lib/http.c

@@ -495,7 +495,6 @@ static CURLcode http_perhapsrewind(struct Curl_easy *data,
             ongoing_auth ? " send, " : "");
     /* We decided to abort the ongoing transfer */
     streamclose(conn, "Mid-auth HTTP and much data left to send");
-    /* FIXME: questionable manipulation here, can we do this differently? */
     data->req.size = 0; /* do not download any more than 0 bytes */
   }
   return CURLE_OK;
@@ -2477,7 +2476,7 @@ static CURLcode http_range(struct Curl_easy *data,
       }
       else if(data->state.resume_from) {
         /* This is because "resume" was selected */
-        /* TODO: not sure if we want to send this header during authentication
+        /* Not sure if we want to send this header during authentication
          * negotiation, but test1084 checks for it. In which case we have a
          * "null" client reader installed that gives an unexpected length. */
         curl_off_t total_len = data->req.authneg ?
@@ -3597,10 +3596,9 @@ static CURLcode http_on_response(struct Curl_easy *data,
       }
 #endif
       else {
-        /* We silently accept this as the final response.
-         * TODO: this looks, uhm, wrong. What are we switching to if we
-         * did not ask for an Upgrade? Maybe the application provided an
-         * `Upgrade: xxx` header? */
+        /* We silently accept this as the final response. What are we
+         * switching to if we did not ask for an Upgrade? Maybe the
+         * application provided an `Upgrade: xxx` header? */
         k->header = FALSE;
       }
       break;

lib/http1.c

@@ -167,8 +167,6 @@ static CURLcode start_req(struct h1_req_parser *parser,
   if(!target_len || !hv_len)
     goto out;
 
-  /* TODO: we do not check HTTP_VERSION for conformity, should
-   + do that when STRICT option is supplied. */
   (void)hv;
 
   /* The TARGET can be (rfc 9112, ch. 3.2):

lib/mime.c

@@ -1598,8 +1598,8 @@ size_t Curl_mime_read(char *buffer, size_t size, size_t nitems, void *instream)
 
   (void) size;   /* Always 1. */
 
-  /* TODO: this loop is broken. If `nitems` is <= 4, some encoders will
-   * return STOP_FILLING without adding any data and this loops infinitely. */
+  /* If `nitems` is <= 4, some encoders will return STOP_FILLING without
+   * adding any data and this loops infinitely. */
   do {
     hasread = FALSE;
     ret = readback_part(part, buffer, nitems, &hasread);

lib/setopt.c

@@ -601,8 +601,8 @@ static CURLcode setopt_long(struct Curl_easy *data, CURLoption option,
     switch(arg) {
     case CURL_HTTP_VERSION_NONE:
 #ifdef USE_HTTP2
-      /* TODO: this seems an undesirable quirk to force a behaviour on
-       * lower implementations that they should recognize independently? */
+      /* This seems an undesirable quirk to force a behaviour on lower
+       * implementations that they should recognize independently? */
       arg = CURL_HTTP_VERSION_2TLS;
 #endif
       /* accepted */

lib/telnet.c

@@ -1552,10 +1552,9 @@ static CURLcode telnet_do(struct Curl_easy *data, bool *done)
         /* returned not-zero, this an error */
         if(result) {
           keepon = FALSE;
-          /* TODO: in test 1452, macOS sees a ECONNRESET sometimes?
-           * Is this the telnet test server not shutting down the socket
-           * in a clean way? Seems to be timing related, happens more
-           * on slow debug build */
+          /* In test 1452, macOS sees a ECONNRESET sometimes? Is this the
+           * telnet test server not shutting down the socket in a clean way?
+           * Seems to be timing related, happens more on slow debug build */
           if(data->state.os_errno == ECONNRESET) {
             DEBUGF(infof(data, "telnet_do, unexpected ECONNRESET on recv"));
           }

lib/url.c

@@ -3212,7 +3212,7 @@ static CURLcode resolve_server(struct Curl_easy *data,
 #endif
 
   if(unix_path) {
-    /* TODO, this only works if previous transport is TRNSPRT_TCP. Check it? */
+    /* This only works if previous transport is TRNSPRT_TCP. Check it? */
     conn->transport = TRNSPRT_UNIX;
     return resolve_unix(data, conn, unix_path);
   }
@@ -3310,7 +3310,7 @@ static void reuse_conn(struct Curl_easy *data,
    *   We want to reuse an existing conn to the remote endpoint.
    * Since connection reuse does not match on conn->host necessarily, we
    * switch `existing` conn to `temp` conn's host settings.
-   * TODO: is this correct in the case of TLS connections that have
+   *       Is this correct in the case of TLS connections that have
    *       used the original hostname in SNI to negotiate? Do we send
    *       requests for another host through the different SNI?
    */
@@ -3570,7 +3570,6 @@ static CURLcode create_conn(struct Curl_easy *data,
   if(result)
     goto out;
 
-  /* FIXME: do we really want to run this every time we add a transfer? */
   Curl_cpool_prune_dead(data);
 
   /*************************************************************

lib/urldata.h

@@ -1108,7 +1108,6 @@ struct Curl_data_prio_node {
 /**
  * Priority information for an easy handle in relation to others
  * on the same connection.
- * TODO: we need to adapt it to the new priority scheme as defined in RFC 9218
  */
 struct Curl_data_priority {
 #ifdef USE_NGHTTP2

lib/vquic/curl_msh3.c

@@ -441,10 +441,10 @@ static bool MSH3_CALL msh3_data_received(MSH3_REQUEST *Request,
   CURLcode result;
   bool rv = FALSE;
 
-  /* TODO: we would like to limit the amount of data we are buffer here.
-   * There seems to be no mechanism in msh3 to adjust flow control and
-   * it is undocumented what happens if we return FALSE here or less
-   * length (buflen is an inout parameter).
+  /* We would like to limit the amount of data we are buffer here. There seems
+   * to be no mechanism in msh3 to adjust flow control and it is undocumented
+   * what happens if we return FALSE here or less length (buflen is an inout
+   * parameter).
    */
   (void)Request;
   if(!stream)
@@ -703,8 +703,8 @@ static ssize_t cf_msh3_send(struct Curl_cfilter *cf, struct Curl_easy *data,
       goto out;
     }
 
-    /* TODO - msh3/msquic will hold onto this memory until the send complete
-       event. How do we make sure curl does not free it until then? */
+    /* msh3/msquic will hold onto this memory until the send complete event.
+       How do we make sure curl does not free it until then? */
     *err = CURLE_OK;
     nwritten = len;
   }
@@ -838,7 +838,7 @@ static CURLcode cf_connect_start(struct Curl_cfilter *cf,
   MSH3_SET_PORT(&addr, (uint16_t)cf->conn->remote_port);
 
   if(verify && (conn_config->CAfile || conn_config->CApath)) {
-    /* TODO: need a way to provide trust anchors to MSH3 */
+    /* Need a way to provide trust anchors to MSH3 */
 #ifdef DEBUGBUILD
     /* we need this for our test cases to run */
     CURL_TRC_CF(data, cf, "non-standard CA not supported, "
@@ -1006,7 +1006,7 @@ static CURLcode cf_msh3_query(struct Curl_cfilter *cf,
 
   switch(query) {
   case CF_QUERY_MAX_CONCURRENT: {
-    /* TODO: we do not have access to this so far, fake it */
+    /* We do not have access to this so far, fake it */
     (void)ctx;
     *pres1 = 100;
     return CURLE_OK;
@@ -1091,7 +1091,7 @@ CURLcode Curl_cf_msh3_create(struct Curl_cfilter **pcf,
 
   (void)data;
   (void)conn;
-  (void)ai; /* TODO: msh3 resolves itself? */
+  (void)ai; /* msh3 resolves itself? */
   ctx = calloc(1, sizeof(*ctx));
   if(!ctx) {
     result = CURLE_OUT_OF_MEMORY;

lib/vquic/curl_ngtcp2.c

@@ -394,7 +394,7 @@ static void quic_printf(void *user_data, const char *fmt, ...)
   struct Curl_cfilter *cf = user_data;
   struct cf_ngtcp2_ctx *ctx = cf->ctx;
 
-  (void)ctx;  /* TODO: need an easy handle to infof() message */
+  (void)ctx;  /* need an easy handle to infof() message */
   va_list ap;
   va_start(ap, fmt);
   vfprintf(stderr, fmt, ap);
@@ -1591,7 +1591,7 @@ static ssize_t cf_ngtcp2_send(struct Curl_cfilter *cf, struct Curl_easy *data,
   if(ctx->tls_vrfy_result)
     return ctx->tls_vrfy_result;
 
-  (void)eos; /* TODO: use for stream EOF and block handling */
+  (void)eos; /* use for stream EOF and block handling */
   result = cf_progress_ingress(cf, data, &pktx);
   if(result) {
     *err = result;
@@ -1965,8 +1965,8 @@ static CURLcode h3_data_pause(struct Curl_cfilter *cf,
                               struct Curl_easy *data,
                               bool pause)
 {
-  /* TODO: there seems right now no API in ngtcp2 to shrink/enlarge
-   * the streams windows. As we do in HTTP/2. */
+  /* There seems to exist no API in ngtcp2 to shrink/enlarge the streams
+   * windows. As we do in HTTP/2. */
   if(!pause) {
     h3_drain_stream(cf, data);
     Curl_expire(data, 0, EXPIRE_RUN_NOW);

lib/vquic/curl_osslq.c

@@ -1980,7 +1980,7 @@ static ssize_t cf_osslq_send(struct Curl_cfilter *cf, struct Curl_easy *data,
   ssize_t nwritten;
   CURLcode result;
 
-  (void)eos; /* TODO: use to end stream */
+  (void)eos; /* use to end stream */
   CF_DATA_SAVE(save, cf, data);
   DEBUGASSERT(cf->connected);
   DEBUGASSERT(ctx->tls.ossl.ssl);

lib/vquic/curl_quiche.c

@@ -926,8 +926,8 @@ static ssize_t cf_quiche_send_body(struct Curl_cfilter *cf,
   nwritten = quiche_h3_send_body(ctx->h3c, ctx->qconn, stream->id,
                                  (uint8_t *)buf, len, eos);
   if(nwritten == QUICHE_H3_ERR_DONE || (nwritten == 0 && len > 0)) {
-    /* TODO: we seem to be blocked on flow control and should HOLD
-     * sending. But when do we open again? */
+    /* Blocked on flow control and should HOLD sending. But when do we open
+     * again? */
     if(!quiche_conn_stream_writable(ctx->qconn, stream->id, len)) {
       CURL_TRC_CF(data, cf, "[%" FMT_PRIu64 "] send_body(len=%zu) "
                   "-> window exhausted", stream->id, len);
@@ -1204,8 +1204,8 @@ static CURLcode h3_data_pause(struct Curl_cfilter *cf,
                               struct Curl_easy *data,
                               bool pause)
 {
-  /* TODO: there seems right now no API in quiche to shrink/enlarge
-   * the streams windows. As we do in HTTP/2. */
+  /* There seems to exist no API in quiche to shrink/enlarge the streams
+   * windows. As we do in HTTP/2. */
   if(!pause) {
     h3_drain_stream(cf, data);
     Curl_expire(data, 0, EXPIRE_RUN_NOW);

lib/vtls/mbedtls.c

@@ -1633,7 +1633,6 @@ static CURLcode mbedtls_sha256sum(const unsigned char *input,
                                   unsigned char *sha256sum,
                                   size_t sha256len UNUSED_PARAM)
 {
-  /* TODO: explain this for different mbedtls 2.x vs 3 version */
   (void)sha256len;
 #if MBEDTLS_VERSION_NUMBER < 0x02070000
   mbedtls_sha256(input, inputlen, sha256sum, 0);

lib/vtls/openssl.c

@@ -2049,8 +2049,6 @@ static CURLcode ossl_set_provider(struct Curl_easy *data, const char *provider)
                         sizeof(error_buffer)));
     /* Do not attempt to load it again */
     data->state.provider_failed = TRUE;
-    /* FIXME not the right error but much less fuss than creating a new
-     * public one */
     return CURLE_SSL_ENGINE_NOTFOUND;
   }
   data->state.provider = TRUE;
@@ -4283,7 +4281,6 @@ static void ossl_trace_ech_retry_configs(struct Curl_easy *data, SSL* ssl,
       servername_type = SSL_get_servername_type(ssl);
       inner = SSL_get_servername(ssl, servername_type);
       SSL_get0_ech_name_override(ssl, &outer, &out_name_len);
-      /* TODO: get the inner from BoringSSL */
       infof(data, "ECH: retry_configs for %s from %s, %d %d",
             inner ? inner : "NULL", outer ? outer : "NULL", reason, rv);
 #endif

lib/vtls/schannel.c

@@ -2367,7 +2367,6 @@ static CURLcode schannel_shutdown(struct Curl_cfilter *cf,
       Curl_pSecFn->FreeContextBuffer(outbuf.pvBuffer);
       if(!result) {
         if(written < (ssize_t)outbuf.cbBuffer) {
-          /* TODO: handle partial sends */
           failf(data, "schannel: failed to send close msg: %s"
                 " (bytes written: %zd)", curl_easy_strerror(result), written);
           result = CURLE_SEND_ERROR;

lib/vtls/vtls.c

@@ -1941,8 +1941,8 @@ CURLcode Curl_alpn_set_negotiated(struct Curl_cfilter *cf,
     else {
       *palpn = CURL_HTTP_VERSION_NONE;
       failf(data, "unsupported ALPN protocol: '%.*s'", (int)proto_len, proto);
-      /* TODO: do we want to fail this? Previous code just ignored it and
-       * some vtls backends even ignore the return code of this function. */
+      /* Previous code just ignored it and some vtls backends even ignore the
+       * return code of this function. */
       /* return CURLE_NOT_BUILT_IN; */
       goto out;
     }

src/tool_operate.c

@@ -586,9 +586,9 @@ static CURLcode post_per_transfer(struct GlobalConfig *global,
            * or close/re-open the file so that the next attempt starts
            * over from the beginning.
            *
-           * TODO: similar action for the upload case. We might need
-           * to start over reading from a previous point if we have
-           * uploaded something when this was returned.
+           * For the upload case, we might need to start over reading from a
+           * previous point if we have uploaded something when this was
+           * returned.
            */
           break;
         }
@@ -2040,9 +2040,9 @@ static CURLcode single_transfer(struct GlobalConfig *global,
            * the headers, we need to open it in append mode, since transfers
            * might finish in any order.
            * The first transfer just clears the file.
-           * TODO: Consider placing the file handle inside the
-           * OperationConfig, so that it does not need to be opened/closed
-           * for every transfer.
+           *
+           * Consider placing the file handle inside the OperationConfig, so
+           * that it does not need to be opened/closed for every transfer.
            */
           if(config->create_dirs) {
             result = create_dir_hierarchy(config->headerfile, global);

tests/server/mqttd.c

@@ -33,9 +33,6 @@
  * Read commands from FILE (set with --config). The commands control how to
  * act and is reset to defaults each client TCP connect.
  *
- * Config file keywords:
- *
- * TODO
  */
 
 /* based on sockfilt.c */
@@ -418,7 +415,7 @@ static int publish(FILE *dump,
   if(!packet)
     return 1;
 
-  packet[0] = MQTT_MSG_PUBLISH; /* TODO: set QoS? */
+  packet[0] = MQTT_MSG_PUBLISH;
   memcpy(&packet[1], rembuffer, encodedlen);
 
   (void)packetid;
@@ -684,10 +681,9 @@ static curl_socket_t mqttit(curl_socket_t fd)
 
       topiclen = (size_t)(buffer[1 + bytes] << 8) | buffer[2 + bytes];
       logmsg("Got %zu bytes topic", topiclen);
-      /* TODO: verify topiclen */
 
 #ifdef QOS
-      /* TODO: handle packetid if there is one. Send puback if QoS > 0 */
+      /* Handle packetid if there is one. Send puback if QoS > 0 */
       puback(dump, fd, 0);
 #endif
       /* expect a disconnect here */