curl/lib/hostcheck.c

98 lines
3.4 KiB
C
Raw Normal View History

SSL: Several SSL-backend related fixes axTLS: This will make the axTLS backend perform the RFC2818 checks, honoring the VERIFYHOST setting similar to the OpenSSL backend. Generic for OpenSSL and axTLS: Move the hostcheck and cert_hostcheck functions from the lib/ssluse.c files to make them genericly available for both the OpenSSL, axTLS and other SSL backends. They are now in the new lib/hostcheck.c file. CyaSSL: CyaSSL now also has the RFC2818 checks enabled by default. There is a limitation that the verifyhost can not be enabled exclusively on the Subject CN field comparison. This SSL backend will thus behave like the NSS and the GnuTLS (meaning: RFC2818 ok, or bust). In other words: setting verifyhost to 0 or 1 will disable the Subject Alt Names checks too. Schannel: Updated the schannel information messages: Split the IP address usage message from the verifyhost setting and changed the message about disabling SNI (Server Name Indication, used in HTTP virtual hosting) into a message stating that the Subject Alternative Names checks are being disabled when verifyhost is set to 0 or 1. As a side effect of switching off the RFC2818 related servername checks with SCH_CRED_NO_SERVERNAME_CHECK (http://msdn.microsoft.com/en-us/library/aa923430.aspx) the SNI feature is being disabled. This effect is not documented in MSDN, but Wireshark output clearly shows the effect (details on the libcurl maillist). PolarSSL: Fix the prototype change in PolarSSL of ssl_set_session() and the move of the peer_cert from the ssl_context to the ssl_session. Found this change in the PolarSSL SVN between r1316 and r1317 where the POLARSSL_VERSION_NUMBER was at 0x01010100. But to accommodate the Ubuntu PolarSSL version 1.1.4 the check is to discriminate between lower then PolarSSL version 1.2.0 and 1.2.0 and higher. Note: The PolarSSL SVN trunk jumped from version 1.1.1 to 1.2.0. Generic: All the SSL backends are fixed and checked to work with the ssl.verifyhost as a boolean, which is an internal API change.
2012-11-03 09:06:51 +08:00
/***************************************************************************
* _ _ ____ _
* Project ___| | | | _ \| |
* / __| | | | |_) | |
* | (__| |_| | _ <| |___
* \___|\___/|_| \_\_____|
*
2013-07-16 01:00:36 +08:00
* Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
SSL: Several SSL-backend related fixes axTLS: This will make the axTLS backend perform the RFC2818 checks, honoring the VERIFYHOST setting similar to the OpenSSL backend. Generic for OpenSSL and axTLS: Move the hostcheck and cert_hostcheck functions from the lib/ssluse.c files to make them genericly available for both the OpenSSL, axTLS and other SSL backends. They are now in the new lib/hostcheck.c file. CyaSSL: CyaSSL now also has the RFC2818 checks enabled by default. There is a limitation that the verifyhost can not be enabled exclusively on the Subject CN field comparison. This SSL backend will thus behave like the NSS and the GnuTLS (meaning: RFC2818 ok, or bust). In other words: setting verifyhost to 0 or 1 will disable the Subject Alt Names checks too. Schannel: Updated the schannel information messages: Split the IP address usage message from the verifyhost setting and changed the message about disabling SNI (Server Name Indication, used in HTTP virtual hosting) into a message stating that the Subject Alternative Names checks are being disabled when verifyhost is set to 0 or 1. As a side effect of switching off the RFC2818 related servername checks with SCH_CRED_NO_SERVERNAME_CHECK (http://msdn.microsoft.com/en-us/library/aa923430.aspx) the SNI feature is being disabled. This effect is not documented in MSDN, but Wireshark output clearly shows the effect (details on the libcurl maillist). PolarSSL: Fix the prototype change in PolarSSL of ssl_set_session() and the move of the peer_cert from the ssl_context to the ssl_session. Found this change in the PolarSSL SVN between r1316 and r1317 where the POLARSSL_VERSION_NUMBER was at 0x01010100. But to accommodate the Ubuntu PolarSSL version 1.1.4 the check is to discriminate between lower then PolarSSL version 1.2.0 and 1.2.0 and higher. Note: The PolarSSL SVN trunk jumped from version 1.1.1 to 1.2.0. Generic: All the SSL backends are fixed and checked to work with the ssl.verifyhost as a boolean, which is an internal API change.
2012-11-03 09:06:51 +08:00
*
* This software is licensed as described in the file COPYING, which
* you should have received as part of this distribution. The terms
* are also available at http://curl.haxx.se/docs/copyright.html.
*
* You may opt to use, copy, modify, merge, publish, distribute and/or sell
* copies of the Software, and permit persons to whom the Software is
* furnished to do so, under the terms of the COPYING file.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
***************************************************************************/
build: fix circular header inclusion with other packages This commit renames lib/setup.h to lib/curl_setup.h and renames lib/setup_once.h to lib/curl_setup_once.h. Removes the need and usage of a header inclusion guard foreign to libcurl. [1] Removes the need and presence of an alarming notice we carried in old setup_once.h [2] ---------------------------------------- 1 - lib/setup_once.h used __SETUP_ONCE_H macro as header inclusion guard up to commit ec691ca3 which changed this to HEADER_CURL_SETUP_ONCE_H, this single inclusion guard is enough to ensure that inclusion of lib/setup_once.h done from lib/setup.h is only done once. Additionally lib/setup.h has always used __SETUP_ONCE_H macro to protect inclusion of setup_once.h even after commit ec691ca3, this was to avoid a circular header inclusion triggered when building a c-ares enabled version with c-ares sources available which also has a setup_once.h header. Commit ec691ca3 exposes the real nature of __SETUP_ONCE_H usage in lib/setup.h, it is a header inclusion guard foreign to libcurl belonging to c-ares's setup_once.h The renaming this commit does, fixes the circular header inclusion, and as such removes the need and usage of a header inclusion guard foreign to libcurl. Macro __SETUP_ONCE_H no longer used in libcurl. 2 - Due to the circular interdependency of old lib/setup_once.h and the c-ares setup_once.h header, old file lib/setup_once.h has carried back from 2006 up to now days an alarming and prominent notice about the need of keeping libcurl's and c-ares's setup_once.h in sync. Given that this commit fixes the circular interdependency, the need and presence of mentioned notice is removed. All mentioned interdependencies come back from now old days when the c-ares project lived inside a curl subdirectory. This commit removes last traces of such fact.
2013-01-07 02:06:49 +08:00
#include "curl_setup.h"
SSL: Several SSL-backend related fixes axTLS: This will make the axTLS backend perform the RFC2818 checks, honoring the VERIFYHOST setting similar to the OpenSSL backend. Generic for OpenSSL and axTLS: Move the hostcheck and cert_hostcheck functions from the lib/ssluse.c files to make them genericly available for both the OpenSSL, axTLS and other SSL backends. They are now in the new lib/hostcheck.c file. CyaSSL: CyaSSL now also has the RFC2818 checks enabled by default. There is a limitation that the verifyhost can not be enabled exclusively on the Subject CN field comparison. This SSL backend will thus behave like the NSS and the GnuTLS (meaning: RFC2818 ok, or bust). In other words: setting verifyhost to 0 or 1 will disable the Subject Alt Names checks too. Schannel: Updated the schannel information messages: Split the IP address usage message from the verifyhost setting and changed the message about disabling SNI (Server Name Indication, used in HTTP virtual hosting) into a message stating that the Subject Alternative Names checks are being disabled when verifyhost is set to 0 or 1. As a side effect of switching off the RFC2818 related servername checks with SCH_CRED_NO_SERVERNAME_CHECK (http://msdn.microsoft.com/en-us/library/aa923430.aspx) the SNI feature is being disabled. This effect is not documented in MSDN, but Wireshark output clearly shows the effect (details on the libcurl maillist). PolarSSL: Fix the prototype change in PolarSSL of ssl_set_session() and the move of the peer_cert from the ssl_context to the ssl_session. Found this change in the PolarSSL SVN between r1316 and r1317 where the POLARSSL_VERSION_NUMBER was at 0x01010100. But to accommodate the Ubuntu PolarSSL version 1.1.4 the check is to discriminate between lower then PolarSSL version 1.2.0 and 1.2.0 and higher. Note: The PolarSSL SVN trunk jumped from version 1.1.1 to 1.2.0. Generic: All the SSL backends are fixed and checked to work with the ssl.verifyhost as a boolean, which is an internal API change.
2012-11-03 09:06:51 +08:00
2013-07-16 01:00:36 +08:00
#if defined(USE_SSLEAY) || defined(USE_AXTLS) || defined(USE_QSOSSL) || \
2013-10-30 18:12:06 +08:00
defined(USE_GSKIT) || defined(USE_NSS)
/* these backends use functions from this file */
#include "hostcheck.h"
#include "rawstr.h"
SSL: Several SSL-backend related fixes axTLS: This will make the axTLS backend perform the RFC2818 checks, honoring the VERIFYHOST setting similar to the OpenSSL backend. Generic for OpenSSL and axTLS: Move the hostcheck and cert_hostcheck functions from the lib/ssluse.c files to make them genericly available for both the OpenSSL, axTLS and other SSL backends. They are now in the new lib/hostcheck.c file. CyaSSL: CyaSSL now also has the RFC2818 checks enabled by default. There is a limitation that the verifyhost can not be enabled exclusively on the Subject CN field comparison. This SSL backend will thus behave like the NSS and the GnuTLS (meaning: RFC2818 ok, or bust). In other words: setting verifyhost to 0 or 1 will disable the Subject Alt Names checks too. Schannel: Updated the schannel information messages: Split the IP address usage message from the verifyhost setting and changed the message about disabling SNI (Server Name Indication, used in HTTP virtual hosting) into a message stating that the Subject Alternative Names checks are being disabled when verifyhost is set to 0 or 1. As a side effect of switching off the RFC2818 related servername checks with SCH_CRED_NO_SERVERNAME_CHECK (http://msdn.microsoft.com/en-us/library/aa923430.aspx) the SNI feature is being disabled. This effect is not documented in MSDN, but Wireshark output clearly shows the effect (details on the libcurl maillist). PolarSSL: Fix the prototype change in PolarSSL of ssl_set_session() and the move of the peer_cert from the ssl_context to the ssl_session. Found this change in the PolarSSL SVN between r1316 and r1317 where the POLARSSL_VERSION_NUMBER was at 0x01010100. But to accommodate the Ubuntu PolarSSL version 1.1.4 the check is to discriminate between lower then PolarSSL version 1.2.0 and 1.2.0 and higher. Note: The PolarSSL SVN trunk jumped from version 1.1.1 to 1.2.0. Generic: All the SSL backends are fixed and checked to work with the ssl.verifyhost as a boolean, which is an internal API change.
2012-11-03 09:06:51 +08:00
/*
* Match a hostname against a wildcard pattern.
* E.g.
* "foo.host.com" matches "*.host.com".
*
* We use the matching rule described in RFC6125, section 6.4.3.
* http://tools.ietf.org/html/rfc6125#section-6.4.3
*/
static int hostmatch(const char *hostname, const char *pattern)
SSL: Several SSL-backend related fixes axTLS: This will make the axTLS backend perform the RFC2818 checks, honoring the VERIFYHOST setting similar to the OpenSSL backend. Generic for OpenSSL and axTLS: Move the hostcheck and cert_hostcheck functions from the lib/ssluse.c files to make them genericly available for both the OpenSSL, axTLS and other SSL backends. They are now in the new lib/hostcheck.c file. CyaSSL: CyaSSL now also has the RFC2818 checks enabled by default. There is a limitation that the verifyhost can not be enabled exclusively on the Subject CN field comparison. This SSL backend will thus behave like the NSS and the GnuTLS (meaning: RFC2818 ok, or bust). In other words: setting verifyhost to 0 or 1 will disable the Subject Alt Names checks too. Schannel: Updated the schannel information messages: Split the IP address usage message from the verifyhost setting and changed the message about disabling SNI (Server Name Indication, used in HTTP virtual hosting) into a message stating that the Subject Alternative Names checks are being disabled when verifyhost is set to 0 or 1. As a side effect of switching off the RFC2818 related servername checks with SCH_CRED_NO_SERVERNAME_CHECK (http://msdn.microsoft.com/en-us/library/aa923430.aspx) the SNI feature is being disabled. This effect is not documented in MSDN, but Wireshark output clearly shows the effect (details on the libcurl maillist). PolarSSL: Fix the prototype change in PolarSSL of ssl_set_session() and the move of the peer_cert from the ssl_context to the ssl_session. Found this change in the PolarSSL SVN between r1316 and r1317 where the POLARSSL_VERSION_NUMBER was at 0x01010100. But to accommodate the Ubuntu PolarSSL version 1.1.4 the check is to discriminate between lower then PolarSSL version 1.2.0 and 1.2.0 and higher. Note: The PolarSSL SVN trunk jumped from version 1.1.1 to 1.2.0. Generic: All the SSL backends are fixed and checked to work with the ssl.verifyhost as a boolean, which is an internal API change.
2012-11-03 09:06:51 +08:00
{
const char *pattern_label_end, *pattern_wildcard, *hostname_label_end;
int wildcard_enabled;
size_t prefixlen, suffixlen;
pattern_wildcard = strchr(pattern, '*');
if(pattern_wildcard == NULL)
return Curl_raw_equal(pattern, hostname) ?
CURL_HOST_MATCH : CURL_HOST_NOMATCH;
/* We require at least 2 dots in pattern to avoid too wide wildcard
match. */
wildcard_enabled = 1;
pattern_label_end = strchr(pattern, '.');
if(pattern_label_end == NULL || strchr(pattern_label_end+1, '.') == NULL ||
pattern_wildcard > pattern_label_end ||
Curl_raw_nequal(pattern, "xn--", 4)) {
wildcard_enabled = 0;
}
if(!wildcard_enabled)
return Curl_raw_equal(pattern, hostname) ?
CURL_HOST_MATCH : CURL_HOST_NOMATCH;
hostname_label_end = strchr(hostname, '.');
if(hostname_label_end == NULL ||
!Curl_raw_equal(pattern_label_end, hostname_label_end))
return CURL_HOST_NOMATCH;
/* The wildcard must match at least one character, so the left-most
label of the hostname is at least as large as the left-most label
of the pattern. */
if(hostname_label_end - hostname < pattern_label_end - pattern)
return CURL_HOST_NOMATCH;
prefixlen = pattern_wildcard - pattern;
suffixlen = pattern_label_end - (pattern_wildcard+1);
return Curl_raw_nequal(pattern, hostname, prefixlen) &&
Curl_raw_nequal(pattern_wildcard+1, hostname_label_end - suffixlen,
suffixlen) ?
CURL_HOST_MATCH : CURL_HOST_NOMATCH;
}
int Curl_cert_hostcheck(const char *match_pattern, const char *hostname)
{
if(!match_pattern || !*match_pattern ||
!hostname || !*hostname) /* sanity check */
return 0;
if(Curl_raw_equal(hostname, match_pattern)) /* trivial case */
return 1;
if(hostmatch(hostname,match_pattern) == CURL_HOST_MATCH)
SSL: Several SSL-backend related fixes axTLS: This will make the axTLS backend perform the RFC2818 checks, honoring the VERIFYHOST setting similar to the OpenSSL backend. Generic for OpenSSL and axTLS: Move the hostcheck and cert_hostcheck functions from the lib/ssluse.c files to make them genericly available for both the OpenSSL, axTLS and other SSL backends. They are now in the new lib/hostcheck.c file. CyaSSL: CyaSSL now also has the RFC2818 checks enabled by default. There is a limitation that the verifyhost can not be enabled exclusively on the Subject CN field comparison. This SSL backend will thus behave like the NSS and the GnuTLS (meaning: RFC2818 ok, or bust). In other words: setting verifyhost to 0 or 1 will disable the Subject Alt Names checks too. Schannel: Updated the schannel information messages: Split the IP address usage message from the verifyhost setting and changed the message about disabling SNI (Server Name Indication, used in HTTP virtual hosting) into a message stating that the Subject Alternative Names checks are being disabled when verifyhost is set to 0 or 1. As a side effect of switching off the RFC2818 related servername checks with SCH_CRED_NO_SERVERNAME_CHECK (http://msdn.microsoft.com/en-us/library/aa923430.aspx) the SNI feature is being disabled. This effect is not documented in MSDN, but Wireshark output clearly shows the effect (details on the libcurl maillist). PolarSSL: Fix the prototype change in PolarSSL of ssl_set_session() and the move of the peer_cert from the ssl_context to the ssl_session. Found this change in the PolarSSL SVN between r1316 and r1317 where the POLARSSL_VERSION_NUMBER was at 0x01010100. But to accommodate the Ubuntu PolarSSL version 1.1.4 the check is to discriminate between lower then PolarSSL version 1.2.0 and 1.2.0 and higher. Note: The PolarSSL SVN trunk jumped from version 1.1.1 to 1.2.0. Generic: All the SSL backends are fixed and checked to work with the ssl.verifyhost as a boolean, which is an internal API change.
2012-11-03 09:06:51 +08:00
return 1;
return 0;
}
2013-10-30 18:12:06 +08:00
#endif /* SSLEAY or AXTLS or QSOSSL or GSKIT or NSS */