curl/lib/cf-haproxy.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

251 lines
6.5 KiB
C
Raw Normal View History

/***************************************************************************
* _ _ ____ _
* Project ___| | | | _ \| |
* / __| | | | |_) | |
* | (__| |_| | _ <| |___
* \___|\___/|_| \_\_____|
*
* Copyright (C) Daniel Stenberg, <daniel@haxx.se>, et al.
*
* This software is licensed as described in the file COPYING, which
* you should have received as part of this distribution. The terms
* are also available at https://curl.se/docs/copyright.html.
*
* You may opt to use, copy, modify, merge, publish, distribute and/or sell
* copies of the Software, and permit persons to whom the Software is
* furnished to do so, under the terms of the COPYING file.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
* SPDX-License-Identifier: curl
*
***************************************************************************/
#include "curl_setup.h"
#if !defined(CURL_DISABLE_PROXY)
#include <curl/curl.h>
#include "urldata.h"
#include "cfilters.h"
#include "cf-haproxy.h"
#include "curl_trc.h"
#include "multiif.h"
/* The last 3 #include files should be in this order */
#include "curl_printf.h"
#include "curl_memory.h"
#include "memdebug.h"
typedef enum {
HAPROXY_INIT, /* init/default/no tunnel state */
HAPROXY_SEND, /* data_out being sent */
HAPROXY_DONE /* all work done */
} haproxy_state;
struct cf_haproxy_ctx {
int state;
struct dynbuf data_out;
};
static void cf_haproxy_ctx_reset(struct cf_haproxy_ctx *ctx)
{
DEBUGASSERT(ctx);
ctx->state = HAPROXY_INIT;
Curl_dyn_reset(&ctx->data_out);
}
static void cf_haproxy_ctx_free(struct cf_haproxy_ctx *ctx)
{
if(ctx) {
Curl_dyn_free(&ctx->data_out);
free(ctx);
}
}
static CURLcode cf_haproxy_date_out_set(struct Curl_cfilter*cf,
struct Curl_easy *data)
{
struct cf_haproxy_ctx *ctx = cf->ctx;
CURLcode result;
const char *tcp_version;
const char *client_ip;
DEBUGASSERT(ctx);
DEBUGASSERT(ctx->state == HAPROXY_INIT);
#ifdef USE_UNIX_SOCKETS
if(cf->conn->unix_domain_socket)
/* the buffer is large enough to hold this! */
result = Curl_dyn_addn(&ctx->data_out, STRCONST("PROXY UNKNOWN\r\n"));
else {
#endif /* USE_UNIX_SOCKETS */
/* Emit the correct prefix for IPv6 */
tcp_version = cf->conn->bits.ipv6 ? "TCP6" : "TCP4";
if(data->set.str[STRING_HAPROXY_CLIENT_IP])
client_ip = data->set.str[STRING_HAPROXY_CLIENT_IP];
else
client_ip = data->info.primary.local_ip;
result = Curl_dyn_addf(&ctx->data_out, "PROXY %s %s %s %i %i\r\n",
tcp_version,
client_ip,
data->info.primary.remote_ip,
data->info.primary.local_port,
data->info.primary.remote_port);
#ifdef USE_UNIX_SOCKETS
}
#endif /* USE_UNIX_SOCKETS */
return result;
}
static CURLcode cf_haproxy_connect(struct Curl_cfilter *cf,
struct Curl_easy *data,
bool blocking, bool *done)
{
struct cf_haproxy_ctx *ctx = cf->ctx;
CURLcode result;
size_t len;
DEBUGASSERT(ctx);
if(cf->connected) {
*done = TRUE;
return CURLE_OK;
}
result = cf->next->cft->do_connect(cf->next, data, blocking, done);
if(result || !*done)
return result;
switch(ctx->state) {
case HAPROXY_INIT:
result = cf_haproxy_date_out_set(cf, data);
if(result)
goto out;
ctx->state = HAPROXY_SEND;
build: enable missing OpenSSF-recommended warnings, with fixes https://best.openssf.org/Compiler-Hardening-Guides/Compiler-Options-Hardening-Guide-for-C-and-C++.html as of 2023-11-29 [1]. Enable new recommended warnings (except `-Wsign-conversion`): - enable `-Wformat=2` for clang (in both cmake and autotools). - add `CURL_PRINTF()` internal attribute and mark functions accepting printf arguments with it. This is a copy of existing `CURL_TEMP_PRINTF()` but using `__printf__` to make it compatible with redefinting the `printf` symbol: https://gcc.gnu.org/onlinedocs/gcc-3.0.4/gcc_5.html#SEC94 - fix `CURL_PRINTF()` and existing `CURL_TEMP_PRINTF()` for mingw-w64 and enable it on this platform. - enable `-Wimplicit-fallthrough`. - enable `-Wtrampolines`. - add `-Wsign-conversion` commented with a FIXME. - cmake: enable `-pedantic-errors` the way we do it with autotools. Follow-up to d5c0351055d5709da8f3e16c91348092fdb481aa #2747 - lib/curl_trc.h: use `CURL_FORMAT()`, this also fixes it to enable format checks. Previously it was always disabled due to the internal `printf` macro. Fix them: - fix bug where an `set_ipv6_v6only()` call was missed in builds with `--disable-verbose` / `CURL_DISABLE_VERBOSE_STRINGS=ON`. - add internal `FALLTHROUGH()` macro. - replace obsolete fall-through comments with `FALLTHROUGH()`. - fix fallthrough markups: Delete redundant ones (showing up as warnings in most cases). Add missing ones. Fix indentation. - silence `-Wformat-nonliteral` warnings with llvm/clang. - fix one `-Wformat-nonliteral` warning. - fix new `-Wformat` and `-Wformat-security` warnings. - fix `CURL_FORMAT_SOCKET_T` value for mingw-w64. Also move its definition to `lib/curl_setup.h` allowing use in `tests/server`. - lib: fix two wrongly passed string arguments in log outputs. Co-authored-by: Jay Satiro - fix new `-Wformat` warnings on mingw-w64. [1] https://github.com/ossf/wg-best-practices-os-developers/blob/56c0fde3895bfc55c8a973ef49a2572c507b2ae1/docs/Compiler-Hardening-Guides/Compiler-Options-Hardening-Guide-for-C-and-C%2B%2B.md Closes #12489
2023-12-08 21:05:09 +08:00
FALLTHROUGH();
case HAPROXY_SEND:
len = Curl_dyn_len(&ctx->data_out);
if(len > 0) {
lib: Curl_read/Curl_write clarifications - replace `Curl_read()`, `Curl_write()` and `Curl_nwrite()` to clarify when and at what level they operate - send/recv of transfer related data is now done via `Curl_xfer_send()/Curl_xfer_recv()` which no longer has socket/socketindex as parameter. It decides on the transfer setup of `conn->sockfd` and `conn->writesockfd` on which connection filter chain to operate. - send/recv on a specific connection filter chain is done via `Curl_conn_send()/Curl_conn_recv()` which get the socket index as parameter. - rename `Curl_setup_transfer()` to `Curl_xfer_setup()` for naming consistency - clarify that the special CURLE_AGAIN hangling to return `CURLE_OK` with length 0 only applies to `Curl_xfer_send()` and CURLE_AGAIN is returned by all other send() variants. - fix a bug in websocket `curl_ws_recv()` that mixed up data when it arrived in more than a single chunk The method for sending not just raw bytes, but bytes that are either "headers" or "body". The send abstraction stack, to to bottom, now is: * `Curl_req_send()`: has parameter to indicate amount of header bytes, buffers all data. * `Curl_xfer_send()`: knows on which socket index to send, returns amount of bytes sent. * `Curl_conn_send()`: called with socket index, returns amount of bytes sent. In addition there is `Curl_req_flush()` for writing out all buffered bytes. `Curl_req_send()` is active for requests without body, `Curl_buffer_send()` still being used for others. This is because the special quirks need to be addressed in future parts: * `expect-100` handling * `Curl_fillreadbuffer()` needs to add directly to the new `data->req.sendbuf` * special body handlings, like `chunked` encodings and line end conversions will be moved into something like a Client Reader. In functions of the pattern `CURLcode xxx_send(..., ssize_t *written)`, replace the `ssize_t` with a `size_t`. It makes no sense to allow for negative values as the returned `CURLcode` already specifies error conditions. This allows easier handling of lengths without casting. Closes #12964
2024-02-15 23:22:53 +08:00
size_t written;
result = Curl_conn_send(data, cf->sockindex,
Curl_dyn_ptr(&ctx->data_out),
len, &written);
if(result == CURLE_AGAIN) {
result = CURLE_OK;
written = 0;
}
else if(result)
goto out;
lib: Curl_read/Curl_write clarifications - replace `Curl_read()`, `Curl_write()` and `Curl_nwrite()` to clarify when and at what level they operate - send/recv of transfer related data is now done via `Curl_xfer_send()/Curl_xfer_recv()` which no longer has socket/socketindex as parameter. It decides on the transfer setup of `conn->sockfd` and `conn->writesockfd` on which connection filter chain to operate. - send/recv on a specific connection filter chain is done via `Curl_conn_send()/Curl_conn_recv()` which get the socket index as parameter. - rename `Curl_setup_transfer()` to `Curl_xfer_setup()` for naming consistency - clarify that the special CURLE_AGAIN hangling to return `CURLE_OK` with length 0 only applies to `Curl_xfer_send()` and CURLE_AGAIN is returned by all other send() variants. - fix a bug in websocket `curl_ws_recv()` that mixed up data when it arrived in more than a single chunk The method for sending not just raw bytes, but bytes that are either "headers" or "body". The send abstraction stack, to to bottom, now is: * `Curl_req_send()`: has parameter to indicate amount of header bytes, buffers all data. * `Curl_xfer_send()`: knows on which socket index to send, returns amount of bytes sent. * `Curl_conn_send()`: called with socket index, returns amount of bytes sent. In addition there is `Curl_req_flush()` for writing out all buffered bytes. `Curl_req_send()` is active for requests without body, `Curl_buffer_send()` still being used for others. This is because the special quirks need to be addressed in future parts: * `expect-100` handling * `Curl_fillreadbuffer()` needs to add directly to the new `data->req.sendbuf` * special body handlings, like `chunked` encodings and line end conversions will be moved into something like a Client Reader. In functions of the pattern `CURLcode xxx_send(..., ssize_t *written)`, replace the `ssize_t` with a `size_t`. It makes no sense to allow for negative values as the returned `CURLcode` already specifies error conditions. This allows easier handling of lengths without casting. Closes #12964
2024-02-15 23:22:53 +08:00
Curl_dyn_tail(&ctx->data_out, len - written);
if(Curl_dyn_len(&ctx->data_out) > 0) {
result = CURLE_OK;
goto out;
}
}
ctx->state = HAPROXY_DONE;
build: enable missing OpenSSF-recommended warnings, with fixes https://best.openssf.org/Compiler-Hardening-Guides/Compiler-Options-Hardening-Guide-for-C-and-C++.html as of 2023-11-29 [1]. Enable new recommended warnings (except `-Wsign-conversion`): - enable `-Wformat=2` for clang (in both cmake and autotools). - add `CURL_PRINTF()` internal attribute and mark functions accepting printf arguments with it. This is a copy of existing `CURL_TEMP_PRINTF()` but using `__printf__` to make it compatible with redefinting the `printf` symbol: https://gcc.gnu.org/onlinedocs/gcc-3.0.4/gcc_5.html#SEC94 - fix `CURL_PRINTF()` and existing `CURL_TEMP_PRINTF()` for mingw-w64 and enable it on this platform. - enable `-Wimplicit-fallthrough`. - enable `-Wtrampolines`. - add `-Wsign-conversion` commented with a FIXME. - cmake: enable `-pedantic-errors` the way we do it with autotools. Follow-up to d5c0351055d5709da8f3e16c91348092fdb481aa #2747 - lib/curl_trc.h: use `CURL_FORMAT()`, this also fixes it to enable format checks. Previously it was always disabled due to the internal `printf` macro. Fix them: - fix bug where an `set_ipv6_v6only()` call was missed in builds with `--disable-verbose` / `CURL_DISABLE_VERBOSE_STRINGS=ON`. - add internal `FALLTHROUGH()` macro. - replace obsolete fall-through comments with `FALLTHROUGH()`. - fix fallthrough markups: Delete redundant ones (showing up as warnings in most cases). Add missing ones. Fix indentation. - silence `-Wformat-nonliteral` warnings with llvm/clang. - fix one `-Wformat-nonliteral` warning. - fix new `-Wformat` and `-Wformat-security` warnings. - fix `CURL_FORMAT_SOCKET_T` value for mingw-w64. Also move its definition to `lib/curl_setup.h` allowing use in `tests/server`. - lib: fix two wrongly passed string arguments in log outputs. Co-authored-by: Jay Satiro - fix new `-Wformat` warnings on mingw-w64. [1] https://github.com/ossf/wg-best-practices-os-developers/blob/56c0fde3895bfc55c8a973ef49a2572c507b2ae1/docs/Compiler-Hardening-Guides/Compiler-Options-Hardening-Guide-for-C-and-C%2B%2B.md Closes #12489
2023-12-08 21:05:09 +08:00
FALLTHROUGH();
default:
Curl_dyn_free(&ctx->data_out);
break;
}
out:
*done = (!result) && (ctx->state == HAPROXY_DONE);
cf->connected = *done;
return result;
}
static void cf_haproxy_destroy(struct Curl_cfilter *cf,
struct Curl_easy *data)
{
(void)data;
CURL_TRC_CF(data, cf, "destroy");
cf_haproxy_ctx_free(cf->ctx);
}
static void cf_haproxy_close(struct Curl_cfilter *cf,
struct Curl_easy *data)
{
CURL_TRC_CF(data, cf, "close");
cf->connected = FALSE;
cf_haproxy_ctx_reset(cf->ctx);
if(cf->next)
cf->next->cft->do_close(cf->next, data);
}
lib: introduce struct easy_poll_set for poll information Connection filter had a `get_select_socks()` method, inspired by the various `getsocks` functions involved during the lifetime of a transfer. These, depending on transfer state (CONNECT/DO/DONE/ etc.), return sockets to monitor and flag if this shall be done for POLLIN and/or POLLOUT. Due to this design, sockets and flags could only be added, not removed. This led to problems in filters like HTTP/2 where flow control prohibits the sending of data until the peer increases the flow window. The general transfer loop wants to write, adds POLLOUT, the socket is writeable but no data can be written. This leads to cpu busy loops. To prevent that, HTTP/2 did set the `SEND_HOLD` flag of such a blocked transfer, so the transfer loop cedes further attempts. This works if only one such filter is involved. If a HTTP/2 transfer goes through a HTTP/2 proxy, two filters are setting/clearing this flag and may step on each other's toes. Connection filters `get_select_socks()` is replaced by `adjust_pollset()`. They get passed a `struct easy_pollset` that keeps up to `MAX_SOCKSPEREASYHANDLE` sockets and their `POLLIN|POLLOUT` flags. This struct is initialized in `multi_getsock()` by calling the various `getsocks()` implementations based on transfer state, as before. After protocol handlers/transfer loop have set the sockets and flags they want, the `easy_pollset` is *always* passed to the filters. Filters "higher" in the chain are called first, starting at the first not-yet-connection one. Each filter may add sockets and/or change flags. When all flags are removed, the socket itself is removed from the pollset. Example: * transfer wants to send, adds POLLOUT * http/2 filter has a flow control block, removes POLLOUT and adds POLLIN (it is waiting on a WINDOW_UPDATE from the server) * TLS filter is connected and changes nothing * h2-proxy filter also has a flow control block on its tunnel stream, removes POLLOUT and adds POLLIN also. * socket filter is connected and changes nothing * The resulting pollset is then mixed together with all other transfers and their pollsets, just as before. Use of `SEND_HOLD` is no longer necessary in the filters. All filters are adapted for the changed method. The handling in `multi.c` has been adjusted, but its state handling the the protocol handlers' `getsocks` method are untouched. The most affected filters are http/2, ngtcp2, quiche and h2-proxy. TLS filters needed to be adjusted for the connecting handshake read/write handling. No noticeable difference in performance was detected in local scorecard runs. Closes #11833
2023-09-04 18:06:07 +08:00
static void cf_haproxy_adjust_pollset(struct Curl_cfilter *cf,
struct Curl_easy *data,
struct easy_pollset *ps)
{
lib: introduce struct easy_poll_set for poll information Connection filter had a `get_select_socks()` method, inspired by the various `getsocks` functions involved during the lifetime of a transfer. These, depending on transfer state (CONNECT/DO/DONE/ etc.), return sockets to monitor and flag if this shall be done for POLLIN and/or POLLOUT. Due to this design, sockets and flags could only be added, not removed. This led to problems in filters like HTTP/2 where flow control prohibits the sending of data until the peer increases the flow window. The general transfer loop wants to write, adds POLLOUT, the socket is writeable but no data can be written. This leads to cpu busy loops. To prevent that, HTTP/2 did set the `SEND_HOLD` flag of such a blocked transfer, so the transfer loop cedes further attempts. This works if only one such filter is involved. If a HTTP/2 transfer goes through a HTTP/2 proxy, two filters are setting/clearing this flag and may step on each other's toes. Connection filters `get_select_socks()` is replaced by `adjust_pollset()`. They get passed a `struct easy_pollset` that keeps up to `MAX_SOCKSPEREASYHANDLE` sockets and their `POLLIN|POLLOUT` flags. This struct is initialized in `multi_getsock()` by calling the various `getsocks()` implementations based on transfer state, as before. After protocol handlers/transfer loop have set the sockets and flags they want, the `easy_pollset` is *always* passed to the filters. Filters "higher" in the chain are called first, starting at the first not-yet-connection one. Each filter may add sockets and/or change flags. When all flags are removed, the socket itself is removed from the pollset. Example: * transfer wants to send, adds POLLOUT * http/2 filter has a flow control block, removes POLLOUT and adds POLLIN (it is waiting on a WINDOW_UPDATE from the server) * TLS filter is connected and changes nothing * h2-proxy filter also has a flow control block on its tunnel stream, removes POLLOUT and adds POLLIN also. * socket filter is connected and changes nothing * The resulting pollset is then mixed together with all other transfers and their pollsets, just as before. Use of `SEND_HOLD` is no longer necessary in the filters. All filters are adapted for the changed method. The handling in `multi.c` has been adjusted, but its state handling the the protocol handlers' `getsocks` method are untouched. The most affected filters are http/2, ngtcp2, quiche and h2-proxy. TLS filters needed to be adjusted for the connecting handshake read/write handling. No noticeable difference in performance was detected in local scorecard runs. Closes #11833
2023-09-04 18:06:07 +08:00
if(cf->next->connected && !cf->connected) {
/* If we are not connected, but the filter "below" is
* and not waiting on something, we are sending. */
lib: introduce struct easy_poll_set for poll information Connection filter had a `get_select_socks()` method, inspired by the various `getsocks` functions involved during the lifetime of a transfer. These, depending on transfer state (CONNECT/DO/DONE/ etc.), return sockets to monitor and flag if this shall be done for POLLIN and/or POLLOUT. Due to this design, sockets and flags could only be added, not removed. This led to problems in filters like HTTP/2 where flow control prohibits the sending of data until the peer increases the flow window. The general transfer loop wants to write, adds POLLOUT, the socket is writeable but no data can be written. This leads to cpu busy loops. To prevent that, HTTP/2 did set the `SEND_HOLD` flag of such a blocked transfer, so the transfer loop cedes further attempts. This works if only one such filter is involved. If a HTTP/2 transfer goes through a HTTP/2 proxy, two filters are setting/clearing this flag and may step on each other's toes. Connection filters `get_select_socks()` is replaced by `adjust_pollset()`. They get passed a `struct easy_pollset` that keeps up to `MAX_SOCKSPEREASYHANDLE` sockets and their `POLLIN|POLLOUT` flags. This struct is initialized in `multi_getsock()` by calling the various `getsocks()` implementations based on transfer state, as before. After protocol handlers/transfer loop have set the sockets and flags they want, the `easy_pollset` is *always* passed to the filters. Filters "higher" in the chain are called first, starting at the first not-yet-connection one. Each filter may add sockets and/or change flags. When all flags are removed, the socket itself is removed from the pollset. Example: * transfer wants to send, adds POLLOUT * http/2 filter has a flow control block, removes POLLOUT and adds POLLIN (it is waiting on a WINDOW_UPDATE from the server) * TLS filter is connected and changes nothing * h2-proxy filter also has a flow control block on its tunnel stream, removes POLLOUT and adds POLLIN also. * socket filter is connected and changes nothing * The resulting pollset is then mixed together with all other transfers and their pollsets, just as before. Use of `SEND_HOLD` is no longer necessary in the filters. All filters are adapted for the changed method. The handling in `multi.c` has been adjusted, but its state handling the the protocol handlers' `getsocks` method are untouched. The most affected filters are http/2, ngtcp2, quiche and h2-proxy. TLS filters needed to be adjusted for the connecting handshake read/write handling. No noticeable difference in performance was detected in local scorecard runs. Closes #11833
2023-09-04 18:06:07 +08:00
Curl_pollset_set_out_only(data, ps, Curl_conn_cf_get_socket(cf, data));
}
}
struct Curl_cftype Curl_cft_haproxy = {
"HAPROXY",
0,
0,
cf_haproxy_destroy,
cf_haproxy_connect,
cf_haproxy_close,
Curl_cf_def_get_host,
lib: introduce struct easy_poll_set for poll information Connection filter had a `get_select_socks()` method, inspired by the various `getsocks` functions involved during the lifetime of a transfer. These, depending on transfer state (CONNECT/DO/DONE/ etc.), return sockets to monitor and flag if this shall be done for POLLIN and/or POLLOUT. Due to this design, sockets and flags could only be added, not removed. This led to problems in filters like HTTP/2 where flow control prohibits the sending of data until the peer increases the flow window. The general transfer loop wants to write, adds POLLOUT, the socket is writeable but no data can be written. This leads to cpu busy loops. To prevent that, HTTP/2 did set the `SEND_HOLD` flag of such a blocked transfer, so the transfer loop cedes further attempts. This works if only one such filter is involved. If a HTTP/2 transfer goes through a HTTP/2 proxy, two filters are setting/clearing this flag and may step on each other's toes. Connection filters `get_select_socks()` is replaced by `adjust_pollset()`. They get passed a `struct easy_pollset` that keeps up to `MAX_SOCKSPEREASYHANDLE` sockets and their `POLLIN|POLLOUT` flags. This struct is initialized in `multi_getsock()` by calling the various `getsocks()` implementations based on transfer state, as before. After protocol handlers/transfer loop have set the sockets and flags they want, the `easy_pollset` is *always* passed to the filters. Filters "higher" in the chain are called first, starting at the first not-yet-connection one. Each filter may add sockets and/or change flags. When all flags are removed, the socket itself is removed from the pollset. Example: * transfer wants to send, adds POLLOUT * http/2 filter has a flow control block, removes POLLOUT and adds POLLIN (it is waiting on a WINDOW_UPDATE from the server) * TLS filter is connected and changes nothing * h2-proxy filter also has a flow control block on its tunnel stream, removes POLLOUT and adds POLLIN also. * socket filter is connected and changes nothing * The resulting pollset is then mixed together with all other transfers and their pollsets, just as before. Use of `SEND_HOLD` is no longer necessary in the filters. All filters are adapted for the changed method. The handling in `multi.c` has been adjusted, but its state handling the the protocol handlers' `getsocks` method are untouched. The most affected filters are http/2, ngtcp2, quiche and h2-proxy. TLS filters needed to be adjusted for the connecting handshake read/write handling. No noticeable difference in performance was detected in local scorecard runs. Closes #11833
2023-09-04 18:06:07 +08:00
cf_haproxy_adjust_pollset,
Curl_cf_def_data_pending,
Curl_cf_def_send,
Curl_cf_def_recv,
Curl_cf_def_cntrl,
Curl_cf_def_conn_is_alive,
Curl_cf_def_conn_keep_alive,
Curl_cf_def_query,
};
static CURLcode cf_haproxy_create(struct Curl_cfilter **pcf,
struct Curl_easy *data)
{
struct Curl_cfilter *cf = NULL;
struct cf_haproxy_ctx *ctx;
CURLcode result;
(void)data;
ctx = calloc(1, sizeof(*ctx));
if(!ctx) {
result = CURLE_OUT_OF_MEMORY;
goto out;
}
ctx->state = HAPROXY_INIT;
Curl_dyn_init(&ctx->data_out, DYN_HAXPROXY);
result = Curl_cf_create(&cf, &Curl_cft_haproxy, ctx);
if(result)
goto out;
ctx = NULL;
out:
cf_haproxy_ctx_free(ctx);
*pcf = result? NULL : cf;
return result;
}
CURLcode Curl_cf_haproxy_insert_after(struct Curl_cfilter *cf_at,
struct Curl_easy *data)
{
struct Curl_cfilter *cf;
CURLcode result;
result = cf_haproxy_create(&cf, data);
if(result)
goto out;
Curl_conn_cf_insert_after(cf_at, cf);
out:
return result;
}
#endif /* !CURL_DISABLE_PROXY */