curl/CMake/CurlTests.c

431 lines
8.8 KiB
C
Raw Normal View History

/***************************************************************************
* _ _ ____ _
* Project ___| | | | _ \| |
* / __| | | | |_) | |
* | (__| |_| | _ <| |___
* \___|\___/|_| \_\_____|
*
* Copyright (C) Daniel Stenberg, <daniel@haxx.se>, et al.
*
* This software is licensed as described in the file COPYING, which
* you should have received as part of this distribution. The terms
2020-11-04 21:02:01 +08:00
* are also available at https://curl.se/docs/copyright.html.
*
* You may opt to use, copy, modify, merge, publish, distribute and/or sell
* copies of the Software, and permit persons to whom the Software is
* furnished to do so, under the terms of the COPYING file.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
* SPDX-License-Identifier: curl
*
***************************************************************************/
#ifdef HAVE_FCNTL_O_NONBLOCK
/* headers for FCNTL_O_NONBLOCK test */
#include <sys/types.h>
#include <unistd.h>
#include <fcntl.h>
/* */
#if defined(sun) || defined(__sun__) || \
defined(__SUNPRO_C) || defined(__SUNPRO_CC)
# if defined(__SVR4) || defined(__srv4__)
# define PLATFORM_SOLARIS
# else
# define PLATFORM_SUNOS4
# endif
#endif
#if (defined(_AIX) || defined(__xlC__)) && !defined(_AIX41)
# define PLATFORM_AIX_V3
#endif
/* */
#if defined(PLATFORM_SUNOS4) || defined(PLATFORM_AIX_V3)
#error "O_NONBLOCK does not work on this platform"
#endif
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
int main(void)
{
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
/* O_NONBLOCK source test */
int flags = 0;
if(0 != fcntl(0, F_SETFL, flags | O_NONBLOCK))
return 1;
return 0;
}
#endif
/* tests for gethostbyname_r */
#if defined(HAVE_GETHOSTBYNAME_R_3_REENTRANT) || \
defined(HAVE_GETHOSTBYNAME_R_5_REENTRANT) || \
defined(HAVE_GETHOSTBYNAME_R_6_REENTRANT)
# define _REENTRANT
/* no idea whether _REENTRANT is always set, just invent a new flag */
# define TEST_GETHOSTBYFOO_REENTRANT
#endif
#if defined(HAVE_GETHOSTBYNAME_R_3) || \
defined(HAVE_GETHOSTBYNAME_R_5) || \
defined(HAVE_GETHOSTBYNAME_R_6) || \
defined(TEST_GETHOSTBYFOO_REENTRANT)
#include <sys/types.h>
#include <netdb.h>
int main(void)
{
char *address = "example.com";
int length = 0;
int type = 0;
struct hostent h;
int rc = 0;
#if defined(HAVE_GETHOSTBYNAME_R_3) || \
defined(HAVE_GETHOSTBYNAME_R_3_REENTRANT)
struct hostent_data hdata;
#elif defined(HAVE_GETHOSTBYNAME_R_5) || \
defined(HAVE_GETHOSTBYNAME_R_5_REENTRANT) || \
defined(HAVE_GETHOSTBYNAME_R_6) || \
defined(HAVE_GETHOSTBYNAME_R_6_REENTRANT)
char buffer[8192];
int h_errnop;
struct hostent *hp;
#endif
#if defined(HAVE_GETHOSTBYNAME_R_3) || \
defined(HAVE_GETHOSTBYNAME_R_3_REENTRANT)
rc = gethostbyname_r(address, &h, &hdata);
#elif defined(HAVE_GETHOSTBYNAME_R_5) || \
defined(HAVE_GETHOSTBYNAME_R_5_REENTRANT)
rc = gethostbyname_r(address, &h, buffer, 8192, &h_errnop);
(void)hp; /* not used for test */
#elif defined(HAVE_GETHOSTBYNAME_R_6) || \
defined(HAVE_GETHOSTBYNAME_R_6_REENTRANT)
rc = gethostbyname_r(address, &h, buffer, 8192, &hp, &h_errnop);
#endif
(void)length;
(void)type;
(void)rc;
return 0;
}
#endif
#ifdef HAVE_IN_ADDR_T
#include <sys/types.h>
#include <sys/socket.h>
#include <arpa/inet.h>
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
int main(void)
{
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
if((in_addr_t *) 0)
return 0;
if(sizeof(in_addr_t))
return 0;
;
return 0;
}
#endif
#ifdef HAVE_BOOL_T
#ifdef HAVE_SYS_TYPES_H
#include <sys/types.h>
#endif
#ifdef HAVE_STDBOOL_H
#include <stdbool.h>
#endif
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
int main(void)
{
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
if(sizeof(bool *))
return 0;
;
return 0;
}
#endif
#ifdef STDC_HEADERS
#include <stdlib.h>
#include <stdarg.h>
#include <string.h>
#include <float.h>
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
int main(void) { return 0; }
#endif
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
#ifdef HAVE_FILE_OFFSET_BITS
#ifdef _FILE_OFFSET_BITS
#undef _FILE_OFFSET_BITS
#endif
#define _FILE_OFFSET_BITS 64
#include <sys/types.h>
/* Check that off_t can represent 2**63 - 1 correctly.
We cannot simply define LARGE_OFF_T to be 9223372036854775807,
since some C++ compilers masquerading as C compilers
incorrectly reject 9223372036854775807. */
#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
&& LARGE_OFF_T % 2147483647 == 1)
? 1 : -1];
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
int main(void) { ; return 0; }
#endif
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
#ifdef HAVE_IOCTLSOCKET
/* includes start */
#ifdef _WIN32
# ifndef WIN32_LEAN_AND_MEAN
# define WIN32_LEAN_AND_MEAN
# endif
# include <winsock2.h>
#endif
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
int main(void)
{
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
/* ioctlsocket source code */
int socket;
unsigned long flags = ioctlsocket(socket, FIONBIO, &flags);
;
return 0;
}
#endif
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
#ifdef HAVE_IOCTLSOCKET_CAMEL
/* includes start */
#ifdef _WIN32
# ifndef WIN32_LEAN_AND_MEAN
# define WIN32_LEAN_AND_MEAN
# endif
# include <winsock2.h>
#endif
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
int main(void)
{
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
/* IoctlSocket source code */
if(0 != IoctlSocket(0, 0, 0))
return 1;
;
return 0;
}
#endif
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
#ifdef HAVE_IOCTLSOCKET_CAMEL_FIONBIO
/* includes start */
#ifdef _WIN32
# ifndef WIN32_LEAN_AND_MEAN
# define WIN32_LEAN_AND_MEAN
# endif
# include <winsock2.h>
#endif
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
int main(void)
{
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
/* IoctlSocket source code */
long flags = 0;
if(0 != IoctlSocket(0, FIONBIO, &flags))
return 1;
;
return 0;
}
#endif
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
#ifdef HAVE_IOCTLSOCKET_FIONBIO
/* includes start */
#ifdef _WIN32
# ifndef WIN32_LEAN_AND_MEAN
# define WIN32_LEAN_AND_MEAN
# endif
# include <winsock2.h>
#endif
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
int main(void)
{
unsigned long flags = 0;
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
if(0 != ioctlsocket(0, FIONBIO, &flags))
return 1;
;
return 0;
}
#endif
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
#ifdef HAVE_IOCTL_FIONBIO
/* headers for FIONBIO test */
/* includes start */
#ifdef HAVE_SYS_TYPES_H
# include <sys/types.h>
#endif
#ifdef HAVE_UNISTD_H
# include <unistd.h>
#endif
#ifdef HAVE_SYS_SOCKET_H
# include <sys/socket.h>
#endif
#ifdef HAVE_SYS_IOCTL_H
# include <sys/ioctl.h>
#endif
#ifdef HAVE_STROPTS_H
# include <stropts.h>
#endif
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
int main(void)
{
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
int flags = 0;
if(0 != ioctl(0, FIONBIO, &flags))
return 1;
;
return 0;
}
#endif
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
#ifdef HAVE_IOCTL_SIOCGIFADDR
/* headers for FIONBIO test */
/* includes start */
#ifdef HAVE_SYS_TYPES_H
# include <sys/types.h>
#endif
#ifdef HAVE_UNISTD_H
# include <unistd.h>
#endif
#ifdef HAVE_SYS_SOCKET_H
# include <sys/socket.h>
#endif
#ifdef HAVE_SYS_IOCTL_H
# include <sys/ioctl.h>
#endif
#ifdef HAVE_STROPTS_H
# include <stropts.h>
#endif
#include <net/if.h>
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
int main(void)
{
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
struct ifreq ifr;
if(0 != ioctl(0, SIOCGIFADDR, &ifr))
return 1;
;
return 0;
}
#endif
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
#ifdef HAVE_SETSOCKOPT_SO_NONBLOCK
/* includes start */
#ifdef _WIN32
# ifndef WIN32_LEAN_AND_MEAN
# define WIN32_LEAN_AND_MEAN
# endif
# include <winsock2.h>
#endif
/* includes start */
#ifdef HAVE_SYS_TYPES_H
# include <sys/types.h>
#endif
#ifdef HAVE_SYS_SOCKET_H
# include <sys/socket.h>
#endif
/* includes end */
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
int main(void)
{
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
if(0 != setsockopt(0, SOL_SOCKET, SO_NONBLOCK, 0, 0))
return 1;
;
return 0;
}
#endif
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
#ifdef HAVE_GLIBC_STRERROR_R
#include <string.h>
#include <errno.h>
void check(char c) {}
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
int main(void)
{
char buffer[1024];
/* This will not compile if strerror_r does not return a char* */
check(strerror_r(EACCES, buffer, sizeof(buffer))[0]);
return 0;
}
#endif
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
#ifdef HAVE_POSIX_STRERROR_R
#include <string.h>
#include <errno.h>
/* Float, because a pointer cannot be implicitly cast to float */
void check(float f) {}
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
int main(void)
{
char buffer[1024];
/* This will not compile if strerror_r does not return an int */
check(strerror_r(EACCES, buffer, sizeof(buffer)));
return 0;
}
#endif
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
#ifdef HAVE_FSETXATTR_6
#include <sys/xattr.h> /* header from libc, not from libattr */
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
int main(void)
{
fsetxattr(0, 0, 0, 0, 0, 0);
return 0;
}
#endif
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
#ifdef HAVE_FSETXATTR_5
#include <sys/xattr.h> /* header from libc, not from libattr */
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
int main(void)
{
fsetxattr(0, 0, 0, 0, 0);
return 0;
}
#endif
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
#ifdef HAVE_CLOCK_GETTIME_MONOTONIC
#include <time.h>
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
int main(void)
{
struct timespec ts = {0, 0};
clock_gettime(CLOCK_MONOTONIC, &ts);
return 0;
}
#endif
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
#ifdef HAVE_BUILTIN_AVAILABLE
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
int main(void)
{
if(__builtin_available(macOS 10.12, iOS 5.0, *)) {}
return 0;
}
#endif
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
#ifdef HAVE_ATOMIC
/* includes start */
#ifdef HAVE_SYS_TYPES_H
# include <sys/types.h>
#endif
#ifdef HAVE_UNISTD_H
# include <unistd.h>
#endif
#ifdef HAVE_STDATOMIC_H
# include <stdatomic.h>
#endif
/* includes end */
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
int main(void)
{
_Atomic int i = 1;
i = 0; /* Force an atomic-write operation. */
return i;
}
#endif
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
#ifdef HAVE_WIN32_WINNT
/* includes start */
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
#ifdef _WIN32
# ifndef WIN32_LEAN_AND_MEAN
# define WIN32_LEAN_AND_MEAN
# endif
# ifndef NOGDI
# define NOGDI
# endif
# include <windows.h>
#endif
/* includes end */
#define enquote(x) #x
#define expand(x) enquote(x)
#pragma message("_WIN32_WINNT=" expand(_WIN32_WINNT))
cmake: pre-fill rest of detection values for Windows The goal of this patch is to avoid unnecessary feature detection work when doing Windows builds with CMake. Do this by pre-filling well-known detection results for Windows and specifically for mingw-w64 and MSVC compilers. Also limit feature checks to platforms where the results are actually used. Drop a few redundant ones. And some tidying up. - pre-fill remaining detection values in Windows CMake builds. Based on actual detection results observed in CI runs, preceding similar work over libssh2 and matching up values with `lib/config-win32.h`. This brings down CMake configuration time from 58 to 14 seconds on the same local machine. On AppVeyor CI this translates to: - 128 seconds -> 50 seconds VS2022 MSVC with OpenSSL (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/4gw66ecrjpy7necb#L296 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/8m4fwrr2fe249uo8#L186 - 62 seconds -> 16 seconds VS2017 MINGW (per CMake job): https://ci.appveyor.com/project/curlorg/curl/builds/48208419/job/s1y8q5ivlcs7ub29?fullLog=true#L290 https://ci.appveyor.com/project/curlorg/curl/builds/48217440/job/pchpxyjsyc9kl13a?fullLog=true#L194 The formula is about 1-3 seconds delay for each detection. Almost all of these trigger a full compile-link cycle behind the scenes, slow even today, both cross and native, mingw-w64 and apparently MSVC too. Enabling .map files or other custom build features slows it down further. (Similar is expected for autotools configure.) - stop detecting `idn2.h` if idn2 was deselected. autotools does this. - stop detecting `idn2.h` if idn2 was not found. This deviates from autotools. Source code requires both header and lib, so this is still correct, but faster. - limit `ADDRESS_FAMILY` detection to Windows. - normalize `HAVE_WIN32_WINNT` value to lowercase `0x0a12` format. - pre-fill `HAVE_WIN32_WINNT`-dependent detection results. Saving 4 (slow) feature-detections in most builds: `getaddrinfo`, `freeaddrinfo`, `inet_ntop`, `inet_pton` - fix pre-filled `HAVE_SYS_TIME_H`, `HAVE_SYS_PARAM_H`, `HAVE_GETTIMEOFDAY` for mingw-w64. Luckily this do not change build results, as `WIN32` took priority over `HAVE_GETTIMEOFDAY` with the current source code. - limit `HAVE_CLOCK_GETTIME_MONOTONIC_RAW` and `HAVE_CLOCK_GETTIME_MONOTONIC` detections to non-Windows. We're not using these in the source code for Windows. - reduce compiler warning noise in CMake internal logs: - fix to include `winsock2.h` before `windows.h`. Apply it to autotools test snippets too. - delete previous `-D_WINSOCKAPI_=` hack that aimed to fix the above. - cleanup `CMake/CurlTests.c` to emit less warnings. - delete redundant `HAVE_MACRO_SIGSETJMP` feature check. It was the same check as `HAVE_SIGSETJMP`. - delete 'experimental' marking from `CURL_USE_OPENSSL`. - show CMake version via `CMakeLists.txt`. Credit to the `zlib-ng` project for the idea: https://github.com/zlib-ng/zlib-ng/blob/61e181c8ae93dbf56040336179c9954078bd1399/CMakeLists.txt#L7 - make `CMake/CurlTests.c` pass `checksrc`. - `CMake/WindowsCache.cmake` tidy-ups. - replace `WIN32` guard with `_WIN32` in `CMake/CurlTests.c`. Closes #12044
2023-10-06 07:38:59 +08:00
int main(void)
{
return 0;
}
#endif