binutils-gdb/include/elf
Stafford Horne c8e98e3692 or1k: Add the l.adrp insn and supporting relocations
This patch adds the new instruction and relocation as per proposal:
   https://openrisc.io/proposals/ladrp

This is to be added to the spec in an upcoming revision.  The new instruction
l.adrp loads the page offset of the current instruction offset by
a 21-bit immediate shifted left 13-bits.  This is meant to be used with
a 13-bit lower bit page offset.  This allows us to free up the got
register r16.

  l.adrp  r3, foo
  l.ori   r4, r3, po(foo)
  l.lbz   r5, po(foo)(r3)
  l.sb    po(foo)(r3), r6

The relocations we add are:

 - BFD_RELOC_OR1K_PLTA26	For PLT jump relocation with PLT entry
   asm: plta()			implemented using l.ardp, meaning
				no need for r16 (the GOT reg)

 - BFD_RELOC_OR1K_GOT_PG21	Upper 21-bit Page offset got address
   asm: got()
 - BFD_RELOC_OR1K_TLS_GD_PG21	Upper 21-bit Page offset with TLS General
   asm: tlsgd()			Dynamic calculation
 - BFD_RELOC_OR1K_TLS_LDM_PG21	Upper 21-bit Page offset with TLS local
   asm: tlsldm()		dynamic calculation
 - BFD_RELOC_OR1K_TLS_IE_PG21	Upper 21-bit Page offset with TLS Initial
   asm: gottp() 		Executable calculation
 - BFD_RELOC_OR1K_PCREL_PG21	Default relocation for disp21 (l.adrp
				instructions)

 - BFD_RELOC_OR1K_LO13		low 13-bit page offset relocation
   asm: po()			i.e. mem loads, addi etc
 - BFD_RELOC_OR1K_SLO13		low 13-bit page offset relocation
   asm: po()			i.e. mem stores, with split immediate
 - BFD_RELOC_OR1K_GOT_LO13,	low 13-bit page offset with GOT calcs
   asm: gotpo()
 - BFD_RELOC_OR1K_TLS_GD_LO13	Lower 13-bit offset with TLS GD calcs
   asm: tlsgdpo()
 - BFD_RELOC_OR1K_TLS_LDM_LO13	Lower 13-bit offset with TLS LD calcs
   asm: tlsldmpo()
 - BFD_RELOC_OR1K_TLS_IE_LO13	Lower 13-bit offset with TLS IE calcs
   asm: gottppo()

bfd/ChangeLog:

yyyy-mm-dd  Richard Henderson  <rth@twiddle.net>

	* bfd-in2.h: Regenerated.
	* elf32-or1k.c: (or1k_elf_howto_table): Fix formatting for
	R_OR1K_PLT26, Add R_OR1K_PCREL_PG21, R_OR1K_GOT_PG21,
	R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21, R_OR1K_TLS_IE_PG21,
	R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13, R_OR1K_TLS_LDM_LO13,
	R_OR1K_TLS_IE_LO13, R_OR1K_SLO13, R_OR1K_PLTA26.
	(or1k_reloc_map): Add BFD_RELOC_OR1K_PCREL_PG21,
	BFD_RELOC_OR1K_GOT_PG21, BFD_RELOC_OR1K_TLS_GD_PG21,
	BFD_RELOC_OR1K_TLS_LDM_PG21, BFD_RELOC_OR1K_TLS_IE_PG21,
	BFD_RELOC_OR1K_LO13, BFD_RELOC_OR1K_GOT_LO13,
	BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_GD_LO13,
	BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_LO13,
	BFD_RELOC_OR1K_SLO13, BFD_RELOC_OR1K_PLTA26.
	(elf_or1k_link_hash_table): Add field saw_plta.
	(or1k_final_link_relocate): Add value calculations for new relocations.
	(or1k_elf_relocate_section): Add section relocations for new
	relocations.
	(or1k_write_plt_entry): New function.
	(or1k_elf_finish_dynamic_sections): Add support for PLTA relocations
	using new l.adrp instruction.  Cleanup PLT relocation code generation.
	* libbfd.h: Regenerated.
	* reloc.c: Add BFD_RELOC_OR1K_PCREL_PG21, BFD_RELOC_OR1K_LO13,
	BFD_RELOC_OR1K_SLO13, BFD_RELOC_OR1K_GOT_PG21, BFD_RELOC_OR1K_GOT_LO13,
	BFD_RELOC_OR1K_PLTA26, BFD_RELOC_OR1K_TLS_GD_PG21,
	BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_PG21,
	BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_PG21,
	BFD_RELOC_OR1K_TLS_IE_LO13.

cpu/ChangeLog:

yyyy-mm-dd  Richard Henderson  <rth@twiddle.net>

	* or1k.opc (parse_disp26): Add support for plta() relocations.
	(parse_disp21): New function.
	(or1k_rclass): New enum.
	(or1k_rtype): New enum.
	(or1k_imm16_relocs): Define new PO and SPO relocation mappings.
	(parse_reloc): Add new po(), gotpo() and gottppo() for LO13 relocations.
	(parse_imm16): Add support for the new 21bit and 13bit relocations.
	* or1korbis.cpu (f-disp26): Don't assume SI.
	(f-disp21): New pc-relative 21-bit 13 shifted to right.
	(insn-opcode): Add ADRP.
	(l-adrp): New instruction.

gas/ChangeLog:

yyyy-mm-dd  Richard Henderson  <rth@twiddle.net>

	* config/tc-or1k.c (or1k_apply_fix): Add BFD_RELOC_OR1K_TLS_GD_PG21,
	BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_PG21,
	BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_PG21,
	BFD_RELOC_OR1K_TLS_IE_LO13.
	* testsuite/gas/or1k/allinsn.s: Add test for l.adrp.
	* testsuite/gas/or1k/allinsn.d: Add test results for new
	instructions.
	* testsuite/gas/or1k/reloc-1.s: Add tests to generate
	R_OR1K_PLTA26, R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21,
	R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13,
	R_OR1K_TLD_LDM_LO13, R_OR1K_TLS_IE_LO13, R_OR1K_LO13, R_OR1K_SLO13
	relocations.
	* testsuite/gas/or1k/reloc-1.d: Add relocation results for
	tests.
	* testsuite/gas/or1k/reloc-2.s: Add negative tests for store to
	gotpo().
	* testsuite/gas/or1k/reloc-2.l: Add expected error test results.

ld/ChangeLog:

yyyy-mm-dd  Richard Henderson  <rth@twiddle.net>

	* testsuite/ld-or1k/or1k.exp: Add test cases for plt generation.
	* testsuite/ld-or1k/plt1.dd: New file.
	* testsuite/ld-or1k/plt1.s: New file.
	* testsuite/ld-or1k/plt1.x.dd: New file.
	* testsuite/ld-or1k/plta1.dd: New file.
	* testsuite/ld-or1k/plta1.s: New file.
	* testsuite/ld-or1k/pltlib.s: New file.

include/ChangeLog:

yyyy-mm-dd  Richard Henderson  <rth@twiddle.net>

	* elf/or1k.h (elf_or1k_reloc_type): Add R_OR1K_PCREL_PG21,
	R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21,
	R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13,
	R_OR1K_TLS_GD_LO13, R_OR1K_TLS_LDM_LO13, R_OR1K_TLS_IE_LO13,
	R_OR1K_SLO13, R_OR1K_PLTA26.

opcodes/ChangeLog:

yyyy-mm-dd  Richard Henderson  <rth@twiddle.net>

	* or1k-asm.c: Regenerated.
	* or1k-desc.c: Regenerated.
	* or1k-desc.h: Regenerated.
	* or1k-dis.c: Regenerated.
	* or1k-ibld.c: Regenerated.
	* or1k-opc.c: Regenerated.
	* or1k-opc.h: Regenerated.
	* or1k-opinst.c: Regenerated.
2018-10-05 11:41:41 +09:00
..
aarch64.h [1/2][GAS][AARCH64]Add BFD_RELOC_AARCH64_TLSLE_LDST8/16/32/64_TPREL_LO12 support in GAS. 2018-03-28 18:03:55 +01:00
alpha.h
arc-cpu.def
arc-reloc.def [ARC] Fixed issue with DTSOFF relocs. 2018-10-01 12:42:11 +01:00
arc.h [ARC] Add Tag_ARC_ATR_version. 2018-08-06 16:41:32 +03:00
arm.h arm - Add some comments about the versions of ARM ELF that define various e_flags values 2018-08-09 16:51:09 +01:00
avr.h
bfin.h
ChangeLog-0415
ChangeLog-9103
common.h Handle missing Solaris auxv entries 2018-09-20 10:23:46 +02:00
cr16.h
cr16c.h
cris.h
crx.h
csky.h Add support for the C_SKY series of processors. 2018-07-30 12:24:14 +01:00
d10v.h
d30v.h
dlx.h
dwarf.h
epiphany.h
external.h
fr30.h
frv.h
ft32.h
h8.h
hppa.h
i370.h Reinstate readelf decoding of i860, i960 and i370 relocs 2018-04-17 10:48:58 +09:30
i386.h
i860.h Reinstate readelf decoding of i860, i960 and i370 relocs 2018-04-17 10:48:58 +09:30
i960.h Reinstate readelf decoding of i860, i960 and i370 relocs 2018-04-17 10:48:58 +09:30
ia64.h
internal.h ELF: Don't include zero size sections at start of PT_NOTE segment 2018-09-21 04:08:01 -07:00
ip2k.h
iq2000.h
lm32.h
m32c.h
m32r.h
m68hc11.h
m68k.h
mcore.h
mep.h
metag.h
microblaze.h [MicroBlaze] PIC data text relative 2018-04-17 14:47:13 -07:00
mips.h [MIPS] Add Loongson 2K1000 proccessor support. 2018-08-29 20:55:25 +08:00
mmix.h
mn10200.h
mn10300.h
moxie.h
msp430.h
mt.h
nds32.h Andes Technology has good news for you, we plan to update the nds32 port of binutils on upstream! 2018-09-20 13:32:58 +01:00
nfp.h This patch adds support to objdump for disassembly of NFP (Netronome Flow Processor) ELF files (.nffw) as well as some basic readelf support. 2018-04-30 17:02:59 +01:00
nios2.h
or1k.h or1k: Add the l.adrp insn and supporting relocations 2018-10-05 11:41:41 +09:00
pj.h
ppc64.h PowerPC64 higher REL16 relocations 2018-08-31 22:15:05 +09:30
ppc.h PowerPC inline PLT call support 2018-04-09 17:25:20 +09:30
pru.h
reloc-macros.h
riscv.h RISC-V: Add RV32E support. 2018-05-18 14:03:18 -07:00
rl78.h
rx.h
s12z.h S12Z: Rename reloc R_S12Z_UKNWN_3 to R_S12Z_EXT18 and implement according to recently inferred information about this reloc. 2018-08-21 19:24:21 +02:00
s390.h
score.h
sh.h
sparc.h
spu.h
tic6x-attrs.h
tic6x.h
tilegx.h
tilepro.h
v850.h
vax.h
visium.h
vxworks.h
wasm32.h
x86-64.h
xc16x.h
xgate.h
xstormy16.h
xtensa.h xtensa: use property tables for correct disassembly 2018-06-04 10:38:55 -07:00